DISCOVERER

MDHHS Systems Use Notification

The Michigan Department of Health and Human Services’ (MDHHS) computer information systems are the
property of the State Of Michigan and subject to state and federal laws, rules and regulations. The systems
are intended for use only by authorized persons and only for official state business.

Systems users are prohibited from using any assigned or entrusted access control mechanisms for any
purposes other than those required to perform authorized data exchange with MDHHS. Logon IDs and
passwords are never to be shared. Systems users must not disclose any confidential, restricted or sensitive
data to unauthorized persons. Systems users will only access information on the systems for which they have
authorization. Systems users will not use MDHHS systems for commercial or partisan political purposes.

Following industry standards, systems users must securely maintain any protected health information (PHI)
downloaded, printed, or removed in any format from the systems. When no longer needed, this information
must be destroyed in an appropriate manner specific to the format type.

By accessing information provided by the Michigan Department of Health and Human Services computer
information systems, I acknowledge and agree to abide by all governing privacy and security terms,
conditions, policies and restrictions for each authorized application.

Discoverer July 31, 2015

 Table of Contents

Introduction 1
What are workbooks 2
What are worksheets 2
What is my username for Discoverer 3

Opening Discoverer 4
Connecting to Discoverer 4

A Required Setting in Discoverer Preferences 6

Errors When Returning to Discoverer 7

The Worksheet List in Discoverer 7

Opening a workbook 7
Opening a worksheet/Running a report 9
Saving changes to a worksheet 10

Previewing and Printing a Worksheet 11

Exporting Discoverer Worksheets 13

A Special note about--macro security level 14

Changing the Worksheet Display 15

Changing the sort criteria 15
Changing the layout of a worksheet 16
Change selection parameters 17

Customizing Discoverer 18
Discoverer preferences 18
Worksheet options 19

Discoverer July 31, 2015

 Introduction
Discoverer is a web based reporting software. For Michigan BCCCP, WISEWOMAN and Colorectal
purposes, the software will be run through a Michigan Department of Community Health network
server. Discoverer will be accessed through the Internet rather than installed as software on your
personal computer. Discoverer allows real-time access to a copy of MBCIS data. Because Discoverer
is a separate reporting tool for MBCIS data, one cannot add or edit MBCIS data through it.

With Discoverer, MBCIS users will have access to numerous reports programmed directly (“hard
coded”) into MBCIS. For convenience, a link to Discoverer is available on the main menu of the
MBCIS thin client software application.

In Discoverer, individual reports are stored within folders called “workbooks.” Most workbooks have
variations of the same or related reports that are analogous to worksheets in Excel. To run a report, just
open the workbook and choose the name of the worksheet (i.e. report) you want. Soon, report data
shows on your screen in the form of a table. Some reports require you to first enter parameter values
before the report data can be retrieved. For example, a report parameter might be the fiscal year of the
data you want displayed.

With Discoverer you can analyze data online, print reports on paper, or export the data to another
program for analysis and printing, such as Excel. Newer features in Discoverer allow you to modify
the format of the report before printing. For instance, you can move columns around or hide them,
change sort criteria, or apply conditional formatting to the values displayed in the report. You can
also save your customized set of changes for future use.

Discover 1 July 2015

 What are workbooks?
Workbooks are Discoverer files that contain worksheets displaying data retrieved from the database. If
you are familiar with spreadsheet applications (e.g. Microsoft Excel) you can think of a workbook as a
spreadsheet file. Discoverer workbooks are stored permanently on the server alongside MBCIS, but
they can be added or changed by a data team programmer with the appropriate MBCIS access rights.

What are worksheets?

Worksheets contain the data from MBCIS that you want to analyze, and they include some components
to help you analyze the data. For example, a worksheet can contain parameters, totals, percentages,
exceptions, and calculations. If you are familiar with spreadsheet applications (e.g. Microsoft Excel)
think of a workbook as a spreadsheet document and worksheets as different sheets in that spreadsheet
document.

Discover 2 July 2015

 A Discoverer worksheet

What is my username for Discoverer?

Your username for Discoverer is the same as your username for MBCIS = SSO User ID.

Discover 3 July 2015

 Opening Discoverer

Connecting to Discoverer
1. When you first click on the DCH Oracle Discoverer Viewer link, you will be taken to the
Connect to OracleBI Discoverer screen: Fill

in the fields as indicated:

2. “Connect To” is an optional field. It should be left at its default.

3. User Name
Your User Name is the same as your SSO ID

4. Password
Your Discoverer Password is maintained separately in your MBCIS account. It does
not change when you update the password associated with your SSO account. If you
do not know your password, please contact Tory Doney at 517-335-8854 or
[email protected].
Note: Changing the password associated with your SSO id does not change the
password associated with your MBCIS id.

Discover 4 July 2015

 5. Database
The database name is “pbc2” (Peanut Butter Cookies – not 1 cookie but 2 cookies) 

6. Leave the “End User Layer” field blank or enter “eul_mbcis” as shown above.

7. Leave the “Locale” field at its default value.

8. Click to start Discoverer. You should see a list of worksheets that looks like this:

Discover 5 July 2015

 A Required Setting in Discoverer Preferences
The Preferences link is available after you have logged onto Discoverer. It is available from the “List
of Workbooks” screen in the upper right corner of the screen.

1. Click on the Preferences link. A new screen with settings for Query Governor, Measure Unit,
Axis Label, Summary Data, and Fan Trap Detection. A change to the Fan-Trap Detection
feature is required before running reports.

2. Fan trap detection will cause many reports to crash or not run at all. The box next to “Enable
fan-trap detection” must be unchecked, as shown below.

Discover 6 July 2015

 Errors When Returning to Discoverer
1. Repeat the steps listed above to return to Discoverer at a later time.
Connecting should only take a few seconds at most. If you do not connect, you will likely see an error
message for invalid username or invalid password. Retry logging in.

If you rule out number 1 and number 2, you may need to call for assistance. Call
Mike at 517-335-9954.

The Worksheet List in Discoverer

Note: In Discoverer, a Workbook is a collection of Worksheets in the same sense that you may have
worksheets in a single Excel document (workbook). In most cases Oracle’s use of the word
“worksheet” is equivalent to the word “report.”

Opening a workbook: How do I find the workbook I want?

You have two choices. You can scroll down the list of workbook names, or you can use the search
utility at the top of the screen. To use the search utility, enter a key term from the title of the
workbook you want to find and click the button.

In the example graphic below, the word “case” was searched as a shortcut for “caseload.” When pulling
results, the search utility examines workbook names and descriptions only. This search does not
include the names of individual worksheets.

Discover 7 July 2015

 When you click on the arrow icon ( ) next to a workbook name, all worksheets in that
workbook are displayed.

Discover 8 July 2015

 Opening a worksheet/Running a report
To run a report, click on the name of the worksheet you want. Discoverer will immediately attempt to
retrieve the data for your worksheet. While the report is running you will see a Query Progress screen.
Sometimes you will be given an estimate of how long it will take Discoverer to pull the report data.

When you have a report open, a Worksheets list will be displayed on the left side of the screen. The
worksheet you have open will be shown in black font and other available reports in the same workbook
will be underlined in brown font.

To return to the listing of all available reports, above the report title is a connection tree. Click on the
Workbooks link in the tree to return to the full report list.

Discover 9 July 2015

 Saving changes to a worksheet
When you have made changes to a report (refer to Formatting section below), the report is saved to
your Discoverer account with a new workbook name.

To save a report, select the Save as link from the Actions menu on the left side of the screen.

A default name will appear for the file you are saving.

Note: If you change a worksheet and then try to switch to a different worksheet without saving it,
Discoverer will prompt you to save or discard the changes you have made.

If you click “Yes,” you will see the proposed default name as shown above and you can elect to save it
or cancel.

How a saved report looks on the list of workbooks is shown in this graphic:

Discover 10 July 2015

 Note that alphabetical order for the workbook list is maintained and your report can be
identified by looking for your user id under the Owner column in the workbook list.

Please note: If you want a custom report that you created deleted, you will need to call Mike at 517-
335-9954 for assistance.

Previewing and printing a worksheet

You preview a worksheet before printing to confirm that the settings in the Print Options page produce
the output you expect. For example, you might want to check that margins, spacing, and set up options
are correct before printing the worksheets. The preview worksheet will contain all data if there are 100
rows of data or less, otherwise it will preview only the first 100 cases.

To preview a worksheet:

1. Display or open the worksheet data that you want to print.

2. Click the Printable Page link to display your report. You can adjust the Printable Page
Options as desired.

Discover 11 July 2015

 3. You can also check Page Setup and make adjustments there as well.

4. When you are satisfied with your settings, click on or to

continue. Oddly, either choice will take you to a PDF version of your report for you to inspect and/or
save. In general, you will want to use . Using the latter choice, , is
only recommended if you have already formatted and printed the report previously.

Discover 12 July 2015

 Exporting Discoverer worksheets
You may export worksheet data from Discoverer so that you can examine the data or format the report
for printing differently.

To export a Discoverer worksheet as a different file type:

1. Display or open the desired worksheet.

2. Click on the Export link from the Actions menu on the left side of the screen.

3. The "Export Options” page will be displayed. Choose export type from the drop down list,

(typically MS Excel) and click to display the "File Download” page:

Discover 13 July 2015

 4. To save your data, click . The “Save As” dialog box will then open and you can
rename the exported file before saving it. You can also control where the file gets saved.
Using instead is not recommended. This will display the data in the application
associated with the type of file you are saving. If you are exporting the file as an Excel document,
the exported file will open up in Excel. However, if you close the whole window with the browser
button your exported data will not be saved.

A Special note about exporting to Microsoft Excel--macro security level setting:

Excel will not allow you to open a Discoverer worksheet exported to an XLS file if the macro security
level in Excel is set to “High.” Excel displays an alert and prevents you from opening the worksheet.

To continue from this warning, select “Enable Macros”. Discoverer reports use a type of macro that
cannot be disabled.

To change your security setting in Microsoft Excel, follow this path:

Tools/
Options/
Security/
Macro Security

In the Macro Security interface, select a lower setting than the default.

Discover 14 July 2015

 Changing the Worksheet Display
There are two general ways that a report can be changed so that it is better suited for printing or online
use: 1) the worksheet can be changed by the creator of the report; 2) the worksheet display can be
changed with settings available to you in Discoverer.

Many new settings and options have been added to Discoverer (from the prior version). This section
will cover only those settings that can directly affect how your report will look when printed. You
can explore other settings and tools on your own.

If you cannot adjust settings in Discoverer to get what you want to print, please call Mike at 517-
335-9954 for assistance or email him at [email protected].

Changing the sort criteria

To sort values in a worksheet use the Sort tool:

1. Display or open the worksheet that you want to analyze.

2. Click the Sort link and then click the More… link to display the Sort Table.

3. Your report should already be sorted by the desired field. If it is not, check for another
worksheet in the workbook that is.

4. You can use the sort table to suppress fields that you do not want to print by checking the
Hide Column button for each field you do not want to see on your report.

Note: Making changes to the sort criteria will cause the report to reload and may take a few seconds.

Discover 15 July 2015

 Changing the layout of a worksheet
To move columns around in a worksheet use the Layout tool:

1. Display or open the worksheet that you want to analyze.

2. Click the Layout link and then click the More… link to display the Table Layout interface.

3. The Table Layout screen displays all of the page items and columns in the report. This screen gives
you two ways to move columns. You can use the “Move” function near the top of the screen with the
drop down buttons to indicate which field you want to move, and where you want to move it to. The
buttons next to each field name allow you to move the field up into the page items, or move it
to the left or right, respectively. You can also move page items down into the main report body.

4. The Table Layout screen also contains a swap function which allows you to swap the position
of “Column A” with that of “Column B.” Use the drop down buttons to select “Swap” and to
choose the fields you wish to swap on the report.

Discover 16 July 2015

 Note: Making changes to the report layout will cause the report to reload and may take a few seconds.

Change selection parameters

When you display a worksheet that contains page items you will want to check the page items to
see if their values are selectable. You often will need to change the values for the page items when
the report first opens. For example, you might want to display data for a different month than
October.

To apply a different parameter value to a worksheet:

1. Click on the drop down arrow and select the value you would like.

2. Wait for the report data to reload. Change additional page item values as necessary.

Discover 17 July 2015

 Customizing Discoverer
There are two ways to tailor Discoverer actions and displays to better suit your needs. The first is
through the Preferences link, which gives you some control over how reports are run and results are
displayed. The second way is through Worksheet Options, which allows you to control the display of
null data cells.

Discoverer preferences
The Preferences link is available after you have logged onto Discoverer. It is available from the “List
of Workbooks” screen in the upper right corner of the screen.

1. Click on the Preferences link. A new screen with settings for Query Governor, Measure Unit,
Axis Label, Summary Data, and Fan Trap Detection.

2. Other than the required Fan-Trap Detection setting described in the section “A Required Setting
in Discoverer Preferences” above, the only section you may be interested in is the query governor.

3. Optional: You can adjust the numbers associated with query time and query quantity to suit your
needs. Changes made in this interface can be undone later.

Discover 18 July 2015

 Worksheet Options
The Worksheet options link under the Actions menu takes you to the Worksheet options
page.

The most useful setting in this interface is the box that shows how null values are displayed in
your reports. The default setting is the word “NULL.” If you do not like to see the word
“NULL” throughout your reports, you can delete this to see blanks, or replace it with a period.

Discover 19 July 2015