Scribd
Upload
478 views2 pages

Weigh Feeder Controller

The document describes the GWS-S weigh feeder controller from IPA. It is a compact controller that can accept analog signals from load cells and digital inputs from a speed sensor. It has a PID controller to control belt/screw motor speed for optimum accuracy. It compares the set rate to the actual rate and controls accordingly. The controller has a large LCD display, 16 keys for parameter entry, and interfaces for load cells, speed sensors, switches, analog and digital communication. It is IP65 rated and operates from -20°C to +40°C.

Uploaded by

suresh kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
478 views2 pages

Weigh Feeder Controller

The document describes the GWS-S weigh feeder controller from IPA. It is a compact controller that can accept analog signals from load cells and digital inputs from a speed sensor. It has a PID controller to control belt/screw motor speed for optimum accuracy. It compares the set rate to the actual rate and controls accordingly. The controller has a large LCD display, 16 keys for parameter entry, and interfaces for load cells, speed sensors, switches, analog and digital communication. It is IP65 rated and operates from -20°C to +40°C.

Uploaded by

suresh kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

An ISO 9001 Certified Company

Innovating since 1977

Weigh Feeder
Controller
The GWS -S weigh feeder controller is a
compact controller which can accept the
analog signal from the load cells and also
the digital input from a speed sensor. It has
an inbuilt PID to run the belt/screw motor at
the required speed to achieve optimum
accuracy. It compares the set rate to the
actual rate computed and controls
accordingly. It is a state of the art, easy to
use controller with sixteen keys for easy
entry of parameter and a large LCD display
to view the status and alarm.

TECHNICAL SPECIFICATIONS:
Make IPA
Model GWS-S
Display 128×64 LCD display screen with 7 background colours for display
Display Refreshing Time : Setting Range 0.1~2.0s
Keypad 16-key
Menu & Shortcut operation with key tone

Loadcell Interface
Excitation Voltage/Max. Current : DC 10 V / 250 mA [8-350Ω loadcells]
Signal Input Range : 0~25mV
∑-△ADC : 24-bit, 100,000 internal code used
Sampling Frequency : 200Hz
Zero Drift : ±0.1µV/℃ RTI (Relative to Input)
Gain Drift : ±5ppm/℃
Non-linearity : 0.005%FS

Speed Sensor Interface


Output Voltage/Max. Current : DC12V/100mA
Speed Pulse Input Range : 0.5~3000Hz
Switch Signal Interface
 3 Normally Open Switch Inputs [DI]
 4 Normally Open Relay Switch Outputs [DO] : AC250V/DC24V, 1A
 1 ‘Totalized Weight High-speed Pulse’ Output [PO] : 100mA, DC5~24V; Weight per Pulse and
Pulse Width can be preset

Analog Signal Interface


 Max.3 Denable ‘Flow/Control Current /…’ Analog Signal Outputs [AO] : 4~20mA, Non-linearity
: 0.05%FS; AO3 is optional
 1 Optional ‘Flow Set point’ Analog Signal Input [AI] : 4~20mA, Non-linearity : 0.05%FS

Digital Communication Interface Operating Specication


COM2: RS232 Operating Voltage : AC220V±15%, 50/60Hz
Max. Power Consumption : 15W
Operating Temperature : -20℃ to +40℃
Storage Temperature : -30℃ to +60℃
Relative Humidity : Max. 85%RH

Outline Size
Panel - mounting : 86 mm x 164 mm x 193 mm [W x H x D]

Panel Cut-out Size


77 mm x 153 mm [W x H ]
Catalogue No: GSW-S/10/18
Protection Level
Front Panel of Panel-mounting : IP 65

Weight
Approx 1.7 kg

IPA Pvt. Ltd.


472/B2, 12th Cross, IV Phase,
Peenya Industrial Area,
Bangalore - 560 058 TM

Ph: 2836 0253 / 2836 2851


014
Email: [email protected]
www.ipaindia.com An ISO 9001 Certified Company

You might also like