Mmds Downconverter MODEL DC02-201
Mmds Downconverter MODEL DC02-201
Mmds Downconverter MODEL DC02-201
MODEL DC02-201
• 256QAM Digital-Ready
• Integrated dipole
• Low phase noise
• High frequency stability
• Low power consumption
• UMTS rejection
PRODUCT APPLICATION:
The MMDS downconverter is designed for reception of digital MMDS signals in the standard
DVB-C format. It is compatible with any CAS (Conditional Access System).
The MMDS downconverter consists of a state-of-the-art receiver integrated with a dipole designed
to be placed at the focal point of standard wire mesh antennas.
This downconverter provides unequalled phase noise and noise figure performance. It includes
integrated front-end filters to protect from interference from WLAN, GSM and 3G.
Other performance characteristics in addition to low phase noise include high linearity and low
in-band ripple, which make it possible to use it for digital DVB-C modulation format of up to and
including 256QAM.
The downconverter can be easily mounted directly on the grill antenna and is compatible with other
types of antennas.
Cable AML, Inc. Tel: (310) 222-5599 Fax: (310) 222-5593 www.cableaml.com 20120813
Product Specification1
MMDS Downconverter Model DC02-201
Electrical Specifications
Input Frequency: 2500 ~ 2686 MHz
Output Frequency: 222 ~ 408 MHz
RF to IF Gain: 36 dB
Gain Stability: ±2dB
Gain Flatness: ±0.1dB @ 6MHz
±1.5dB @ 222~408 MHz
Local Oscillator Frequency: 2278 MHz
Local Oscillator Stability: ±25 KHz over temperature.
Local Oscillator Phase Noise: -85 dBc/Hz @ 1KHz
-92 dBc/Hz @ 10 KHz
-99 dBc/Hz @ 100KHz
Local Oscillator LO Leakage: -60 dBm max. @ Antenna port.
-45 dBm @ IF port.
Noise Figure Room Temp: 2 dB typ.
Noise Figure Over Temp: 3 dB max.
Image Rejection : 70 dB min.
IF Rejection: 80 dB min.
PCS Rejection: 90 dB min.
WCS Rejection: 52 dB min.
Spurious in F Band : -80 dBm max.
Interface Specifications
Input Interface Impedance: 75 ohm
Input Interface Connector: “F” Type Female
Antenna Interface Dipole (focal length for 18 dBi and 21 dBi mesh antennas)
Power Supply Voltage: +15 to +24 VDC
Power Supply Current : 150 mA max. (@ 15 VDC)
Environmental Specifications
Temperature: -30°C ~ +70°C
Humidity: 100% water proof
Lighting Protection: Meet or exceeds IEEE specifications
Dimensions: 11.5”W x 2.16”H x 1.22”D (294 mm x 55 mm x 31 mm)
1
Specifications subject to change without prior notice.
Cable AML, Inc. Tel: (310) 222-5599 Fax: (310) 222-5593 www.cableaml.com 20120813