AQUENCE BG 7093 Known as Adhesin A 7093 March-2013
PRODUCT DESCRIPTION Application
AQUENCE BG 7093 provides the following product Application method: characteristics: ● disc Technology Synthetic Resin Dispersion ● nozzle Product Type Dispersion ● roller without plasticizer ● segment Application Bookbinding Industry Packaging Industry Most suitable processing temperature: 18 - 25 °C. Application Areas Dilution Packaging Industry: AQUENCE BG 7093 can be diluted with cold water if Bonding of unlacquered and lacquered paper and cardboard required. on packaging machines. Lamination of rigid and soft PVC-films with absorbent Cleaning materials. Uncured adhesive residues can easily be removed with Diaphragm gluing. water. Wetting agents accelerate the cleaning process. Graphic Industry: Casing in of books into covers made from PVC, general Handling Information bondings of PVC-materials with paper or cardboard. Due to the variety of different materials available on the Billboarding: markets pre-tests should be carried out. Primer for billboards made of metal or aluminum. STORAGE Film Properties Protect from freezing. ● elastic Close containers thoroughly after use. ● heat resistant When stored in a dry and cool place in the original unopened ● resistant against plasticizers containers shelf life is as follows. Product Properties Shelf life: AQUENCE BG 7093 is a fast setting adhesive. Shelf-life (in unopened original packaging), months 6 Recommended Storage Temperature, °C 15 to 25 Technical Data AQUENCE BG 7093: Viscosity, Brookfield - RVT, 3/20/23, mPa.s 1,900 to 2,900 Classification: ISO 2555 Please refer to the corresponding safety data sheets for pH value 4 to 6 details on: ISO 976 Hazardous Information Transport Regulations Safety Regulations Compliance with food packaging regulations Under specific conditions, AQUENCE BG 7093 is suitable for the manufacture of food packaging materials under the applicable FDA, EC-provisions and/or BfR recommendations. The responsibility for compliance with the specific conditions is with the converter and not with the adhesive supplier. A food contact statement with further details is available on request. DIRECTIONS OF USE Preliminary Statement Prior to application it is necessary to read the Safety Data Sheet for information about precautionary measures and safety recommendations. Also, for chemical products exempt from compulsory labeling, the relevant precautions should always be observed. Please also refer to the local safety instructions and contact Henkel for analytical support. TDS AQUENCE BG 7093, March-2013
ADDITIONAL INFORMATION Disclaimer Note: The information provided in this Technical Data Sheet (TDS) including the recommendations for use and application of the product are based on our knowledge and experience of the product as at the date of this TDS. The product can have a variety of different applications as well as differing application and working conditions in your environment that are beyond our control. Henkel is, therefore, not liable for the suitability of our product for the production processes and conditions in respect of which you use them, as well as the intended applications and results. We strongly recommend that you carry out your own prior trials to confirm such suitability of our product. Any liability in respect of the information in the Technical Data Sheet or any other written or oral recommendation(s) regarding the concerned product is excluded, except if otherwise explicitly agreed and except in relation to death or personal injury caused by our negligence and any liability under any applicable mandatory product liability law.
In case products are delivered by Henkel Belgium NV, Henkel Electronic
Materials NV, Henkel Nederland BV, Henkel Technologies France SAS and Henkel France SA please additionally note the following: In case Henkel would be nevertheless held liable, on whatever legal ground, Henkel’s liability will in no event exceed the amount of the concerned delivery.
In case products are delivered by Henkel Colombiana, S.A.S. the
following disclaimer is applicable: The information provided in this Technical Data Sheet (TDS) including the recommendations for use and application of the product are based on our knowledge and experience of the product as at the date of this TDS. Henkel is, therefore, not liable for the suitability of our product for the production processes and conditions in respect of which you use them, as well as the intended applications and results. We strongly recommend that you carry out your own prior trials to confirm such suitability of our product. Any liability in respect of the information in the Technical Data Sheet or any other written or oral recommendation(s) regarding the concerned product is excluded, except if otherwise explicitly agreed and except in relation to death or personal injury caused by our negligence and any liability under any applicable mandatory product liability law.
In case products are delivered by Henkel Corporation, Resin Technology
Group, Inc., or Henkel Canada Corporation, the following disclaimer is applicable: The data contained herein are furnished for information only and are believed to be reliable. We cannot assume responsibility for the results obtained by others over whose methods we have no control. It is the user's responsibility to determine suitability for the user's purpose of any production methods mentioned herein and to adopt such precautions as may be advisable for the protection of property and of persons against any hazards that may be involved in the handling and use thereof. In light of the foregoing, Henkel Corporation specifically disclaims all warranties expressed or implied, including warranties of merchantability or fitness for a particular purpose, arising from sale or use of Henkel Corporation’s products. Henkel Corporation specifically disclaims any liability for consequential or incidental damages of any kind, including lost profits. The discussion herein of various processes or compositions is not to be interpreted as representation that they are free from domination of patents owned by others or as a license under any Henkel Corporation patents that may cover such processes or compositions. We recommend that each prospective user test his proposed application before repetitive use, using this data as a guide. This product may be covered by one or more United States or foreign patents or patent applications.
Trademark usage Except as otherwise noted, all trademarks in this document are trademarks of Henkel Corporation in the U.S. and elsewhere. ® denotes a trademark registered in the U.S. Patent and Trademark Office.
Reference 0.0
Henkel AG & Co. KGaA Henkel Corporation Henkel (China) Co.Ltd.
40191 Düsseldorf, Germany Bridgewater, NJ 08807, USA 201203 Shanghai, China Phone: +49-211-797-0 Phone: +1-908-685-7000 Phone: +86-21-2891-8000
