Frances Juris B. Natino 7-STE 1 ICT Quarter 2-Module 1: Activity 1 A
Frances Juris B. Natino 7-STE 1 ICT Quarter 2-Module 1: Activity 1 A
Frances Juris B. Natino 7-STE 1 ICT Quarter 2-Module 1: Activity 1 A
NATINO
7-STE 1
ICT
QUARTER 2-MODULE 1
WHAT I KNOW
1. A
2. C
3. C
4. A
5. D
6. A
7. D
8. C
9. A
10. C
WHAT IS IT
ACTIVITY 1
A.
1. B
2. D
3. A
4. C
5. E
B.
1. The common tools being used by a cellphone technician or electricians are the
following:
- Side cutter pliers
- Long nose pliers
- Flat screw driver
- Philips screw driver
- Soldering pencil
- Desoldering tool
- Multi-volts power supply
- Multi-tester
- Portable electric hand drill
2. You need to use tools because it can help you fasten your work
WHAT I HAVE LEARNED
•Soldering pencil
- An electronic hand tool used to connect two or more metal conductors with
melted of soldering lead.
WHAT I CAN DO
1. Cleanliness is significant for efficient and effective soldering. Solder will not stick
on to dirty, greasy, or oxidized surfaces. Oxidation is very fast in heated metals.
The use of suitable solvent and chemicals are necessary to remove dirt, oxides,
scale and grease. Connections to be soldered should be cleaned prior to the
actual soldering job.
ASSESSMENT
1. A
2. C
3. C
4. A
5. D
6. A
7. D
8. C
9. A
10. C
ADDITIONAL ACTIVITIES
ACTIVITY 4
A.
B.
1. Flat screwdriver- is a tool used to fasten and loosen negative slotted screw.
2. Multi-tester- is an electronic equipment used to measure resistance, current
and voltage.