Y-Bearings and Y-Bearing Units

Y-bearings
and Y-bearing units

® SKF is a registered trademark of the SKF Group.
© SKF Group 2013

The contents of this publication are the copyright
of the publisher and may not be reproduced (even
extracts) unless prior written permission is granted.
Every care has been taken to ensure the accuracy
of the information contained in this publication but
no liability can be accepted for any loss or damage
whether direct, indirect or consequential arising out
of the use of the information contained herein.
P U B B U / P 1 13728 E N · June 2013
This publication supersedes catalogue 06001 EN.

Principles of selection and application ......................... 15
1
Y-bearings ................................................................. 79
2
Y-bearing plummer block units ................................... 111

3
Flanged Y-bearing units .............................................. 163

4
Y-bearing take-up units .............................................. 235

5
SKF ConCentra ball bearings and units ........................ 247

6
SKF Food Line Y-bearing units .................................... 251

7
Product index ............................................................. 255

8
This is SKF
From one simple but inspired solution to a

misalignment problem in a textile mill in
Sweden, and fifteen employees in 1907, SKF
has grown to become a global industrial
knowledge leader. Over the years we have built
on our expertise in bearings, extending it to
seals, mechatronics, services and lubrication
systems. Our knowledge network includes
46 000 employees, 15 000 distributor partners,
offices in more than 130 countries, and a
growing number of SKF Solution Factory sites
around the world.
Research and development
We have hands-on experience in over
40 industries, based on our employees’
knowledge of real life conditions. In addition our
world-leading experts and university partners
who pioneer advanced theoretical research and
development in areas including tribology,
condition monitoring, asset management and
bearing life theory. Our ongoing commitment to
SKF Solution Factory makes

SKF knowledge and
manufacturing expertise
available locally, to provide
unique solutions and services to
our customers.
2
research and development helps us keep our
customers at the forefront of their industries.
Meeting the toughest challenges
Our network of knowledge and experience along
with our understanding of how our core
technologies can be combined helps us create
innovative solutions that meet the toughest of
challenges. We work closely with our customers
throughout the asset life cycle, helping them to
profitably and responsibly grow their
businesses.
Working for a sustainable future
Since 2005, SKF has worked to reduce the
negative environmental impact from our own
operations and those of our suppliers. Our
continuing technology development introduced
the SKF BeyondZero portfolio of products and
services which improve efficiency and reduce
energy losses, as well as enable new technolo-
gies harnessing wind, solar and ocean power.
This combined approach helps reduce the
environmental impact both in our own
operations and in our customers’.
Working with SKF IT and

logistics systems and
application experts, SKF
Authorized Distributors deliver
a valuable mix of product and
application knowledge to
customers worldwide.
3
SKF – the kno wledge
engineering company
Our knowledge Design and develo

p
– your success ca
tio
n Man
ufa
ctu
SKF Life Cycle Management is cifi re
Spe
an
how we combine our technology d
te
platforms and advanced
st
SKF Life Cycle
services, and apply them at each Management
ission
stage of the asset life cycle, to
Ma
help our customers to be more ta

in
in
m
successful, sustainable and an
om
dr
profitable. ep
dc
air n
la
tal
Opera Ins
te and monitor
Working closely with you improve machine performance by looking at the

Our objective is to help our customers improve entire application. This approach doesn’t just
productivity, minimize maintenance, achieve focus on individual components like bearings or
higher energy and resource efficiency, and seals. It looks at the whole application to see
optimize designs for long service life and how each component interacts with the next.
reliability.
Design optimization and verification
Innovative solutions SKF can work with you to optimize current or
Whether the application is linear or rotary or a new designs with proprietary 3-D modelling
combination of the two, SKF engineers can work software that can also be used as a virtual test
with you at each stage of the asset life cycle to rig to confirm the integrity of the design.
4
Bearings
SKF is the world leader in the design, development and manufacture
of high performance rolling bearings, plain bearings, bearing units
and housings.
Machinery maintenance
Condition monitoring technologies and maintenance services from
SKF can help minimize unplanned downtime, improve operational
efficiency and reduce maintenance costs.
Sealing solutions
SKF offers standard seals and custom engineered sealing solutions to
increase uptime, improve machine reliability, reduce friction and
power losses, and extend lubricant life.
Mechatronics
SKF fly-by-wire systems for aircraft and drive-by-wire systems for
off-road, agricultural and forklift applications replace heavy, grease or
oil consuming mechanical and hydraulic systems.
Lubrication solutions
From specialized lubricants to state-of-the-art lubrication systems
and lubrication management services, lubrication solutions from SKF
can help to reduce lubrication related downtime and lubricant
consumption.
Actuation and motion control

With a wide assortment of products – from actuators and ball screws
to profile rail guides – SKF can work with you to solve your most
pressing linear system challenges.
5
Contents
This is SKF................................................................................................................. 2
SKF – the knowledge engineering company .................................................................. 4
Foreword .................................................................................................................. 11
1 Principles of selection and application................................................................. 15

Designs..................................................................................................................................... 16
Bearing terminology .......................................................................................................... 17
Y-bearings (insert bearings/wide inner ring bearings) .................................................... 18
Y-bearing units (mounted ball bearing, unit ball) ............................................................ 19
Selection of Y-bearing unit type.............................................................................................. 24
Locating on the shaft ......................................................................................................... 25
Loads .................................................................................................................................. 26
Seals ................................................................................................................................... 27
Permissible operating temperatures ................................................................................ 28
Speeds ................................................................................................................................ 29
Application note ................................................................................................................. 29
Selection of Y-bearing unit size .............................................................................................. 30
Load carrying ability and life.............................................................................................. 30
Selecting the bearing unit size using the life equations ................................................... 30
Equivalent dynamic bearing load ...................................................................................... 32
Dynamic bearing loads ...................................................................................................... 34
Requisite minimum load .................................................................................................... 34
Axial load carrying ability ................................................................................................... 34
Selecting the bearing unit size using the static load carrying capacity ........................... 35
Speeds...................................................................................................................................... 38
Design of Y-bearing arrangements ........................................................................................ 40
Axial displacement ............................................................................................................. 40
Misalignment ..................................................................................................................... 42
Support surfaces ............................................................................................................... 42
Attaching to the support surface....................................................................................... 43
Shaft tolerances ................................................................................................................. 43
Rubber seating rings.......................................................................................................... 45
End covers .......................................................................................................................... 47
Lubrication and maintenance ................................................................................................. 48
Grease fills .......................................................................................................................... 48
Relubrication ...................................................................................................................... 48
Relubrication intervals....................................................................................................... 50
6
Mounting instructions ............................................................................................................. 52
Mounting instructions – general ....................................................................................... 52
Mounting instructions for Y-bearing plummer block units
with a composite (Y-TECH) or cast housing and grub screws.................................... 56
with a cast housing and an eccentric locking collar .................................................... 57
with a cast housing and an adapter sleeve ................................................................. 58
with a pressed steel housing and grub screws ........................................................... 60
with a pressed steel housing and an eccentric locking collar ..................................... 62
Mounting instructions for Flanged Y-bearing units
with a composite (Y-TECH) or cast housing and grub screws.................................... 64
with a composite (Y-TECH) or cast housing and an eccentric
locking collar................................................................................................................. 65
with a cast housing and an adapter sleeve ................................................................. 66
with a pressed steel housing and grub screws ........................................................... 68
with a pressed steel housing and an eccentric locking collar ..................................... 70
Mounting instructions for Y-bearing take-up units
with a cast housing and grub screws .......................................................................... 72
with a cast housing and an eccentric locking collar .................................................... 73
Storing Y-bearings and Y-bearing units ................................................................................. 74
Designation systems ............................................................................................................... 75
2 Y-bearings ........................................................................................................ 79
Product tables
2.1 Y-bearings with grub screws, metric shafts .................................................................. 92
Y-bearings with grub screws, inch shafts ...................................................................... 94
2.2 Y-bearings with an eccentric locking collar, metric shafts ............................................ 98
Y-bearings with an eccentric locking collar, inch shafts ................................................ 100
2.3 Y-bearings with a tapered bore on an adapter sleeve, metric shafts........................... 102
Y-bearings with a tapered bore on an adapter sleeve, inch shafts............................... 104
2.4 Y-bearings with a standard inner ring, metric shafts ................................................... 106
2.5 Y-bearings with a hexagonal bore, inch shafts ............................................................. 108
3 Y-bearing plummer block units........................................................................... 111

Product tables
3.1 Y-TECH plummer block units with grub screws, metric shafts .................................... 120
3.2 Y-bearing plummer block units with a cast housing and grub screws,
metric shafts ................................................................................................................... 122
inch shafts ....................................................................................................................... 126
3.3 Y-bearing plummer block units with a cast housing and an eccentric locking collar,
metric shafts ................................................................................................................... 134
inch shafts ....................................................................................................................... 136
3.4 Y-bearing plummer block units with a cast housing and an adapter sleeve,
metric shafts ................................................................................................................... 142
inch shafts ....................................................................................................................... 144
3.5 Y-bearing plummer block units with a shortened cast housing and grub screws,
metric shafts .................................................................................. ................................ 148
3.6 Y-bearing plummer block units with a shortened cast housing and an eccentric
locking collar,
metric shafts ................................................................................................................... 150
3.7 Y-bearing plummer block units with a pressed steel housing and grub screws
metric shafts ................................................................................................................... 152
inch shafts ....................................................................................................................... 156
7
3.8 Y-bearing plummer block units with a pressed steel housing and an eccentric locking collar
metric shafts ................................................................................................................... 158
inch shafts ....................................................................................................................... 160
4 Flanged Y-bearing units ..................................................................................... 163

Product tables
4.1 Flanged Y-TECH units with a housing with a square flange and grub screws,
metric shafts ................................................................................................................... 174
4.2 Flanged Y-TECH units with a housing with an oval flange and grub screws,
metric shafts ................................................................................................................... 176
4.3 Flanged Y-bearing units with a cast housing with a square flange and grub screws,
metric shafts ................................................................................................................... 178
inch shafts ....................................................................................................................... 182
4.4 Flanged Y-bearing units with a cast housing with a square flange and an eccentric
locking collar,
metric shafts ................................................................................................................... 188
inch shafts ....................................................................................................................... 190
4.5 Flanged Y-bearing units with a cast housing with a square flange and an adapter sleeve,
metric shafts ................................................................................................................... 194
inch shafts ....................................................................................................................... 196
4.6 Flanged Y-bearing units with a cast housing with an oval flange and grub screws,
metric shafts ................................................................................................................... 200
inch shafts ....................................................................................................................... 202
4.7 Flanged Y-bearing units with a cast housing with an oval flange and an eccentric
locking collar,
metric shafts ................................................................................................................... 208
inch shafts ....................................................................................................................... 210
4.8 Flanged Y-bearing units with a cast housing with an oval flange and an adapter sleeve,
metric shafts ................................................................................................................... 214
inch shafts ....................................................................................................................... 216
4.9 Flanged Y-bearing units with a cast housing with a round flange and grub screws,
metric shafts ................................................................................................................... 218
4.10 Flanged Y-bearing units with a pressed steel housing and grub screws,
metric shafts ................................................................................................................... 220
inch shafts ....................................................................................................................... 224
4.11 Flanged Y-bearing units with a pressed steel housing and an eccentric locking collar,
metric shafts ................................................................................................................... 228
inch shafts ....................................................................................................................... 232
5 Y-bearing take-up units ..................................................................................... 235

Product tables
5.1 Y-bearing take-up units with a cast housing and grub screws,
metric shafts ................................................................................................................... 238
inch shafts ....................................................................................................................... 240
5.2 Y-bearing take-up units with a cast housing and an eccentric locking collar,
metric shafts ................................................................................................................... 244
6 SKF ConCentra ball bearings and units ................................................................ 247
7 SKF Food Line Y-bearing units ............................................................................ 251
8 Product index.................................................................................................... 255
8
9
10
Foreword
This catalogue provides a representative over-

view of the range of Y-bearings and Y-bearing
units available from SKF. The data in this cata-
logue is based on the latest standards and
product upgrades. However, SKF reserves the
right to make any changes necessary as a result
of continuous improvement with respect to
materials, design and manufacture.
This catalogue contains all the data relevant
to Y-bearings and Y-bearing units. All the data
required to select a Y-bearing or Y-bearing unit
respectively are listed in the product tables.
Descriptions of the Y-bearing and Y-bearing
unit types including design features and other
information precede each product section.
General data regarding selecting a Y-bearing
or Y-bearing unit type and size, speeds, bearing
arrangement design, lubrication, mounting and
designations are included in the catalogue too.
The catalogue is designed so that product
information is easy to find and use. Each of the
8 chapters listed in the table of contents is
clearly identified by a number and colour.
11
12
Unit conversions
Quantity Unit Conversion
Length inch 1 mm 0,03937 in 1 in 25,40 mm

foot 1m 3,281 ft 1 ft 0,3048 m
yard 1m 1,094 yd 1 yd 0,9144 m
mile 1 km 0,6214 mile 1 mile 1,609 km
Area square inch 1 mm2 0,00155 sq.in 1 sq.in 645,16 mm2

square foot 1 m2 10,76 sq.ft 1 sq.ft 0,0929 m2
Volume cubic inch 1 cm3 0,061 cub.in 1 cub.in 16,387 cm3

cubic foot 1 m3 35 cub.ft 1 cub.ft 0,02832 m3
imperial gallon 1l 0,22 gallon 1 gallon 4,5461 l
U.S. gallon 1l 0,2642 U.S. 1 U.S. 3,7854 l
gallon gallon
Velocity, foot per second 1 m/s 3,28 ft/s 1 ft/s 0,30480 m/s
speed mile per hour 1 km/h 0,6214 mile/h 1 mile/h 1,609 km/h
(mph) (mph)
Mass ounce 1g 0,03527 oz 1 oz 28,350 g

pound 1 kg 2,205 lb 1 lb 0,45359 kg
short ton 1 tonne 1,1023 short ton 1 short ton 0,90719 tonne
long ton 1 tonne 0,9842 long ton 1 long ton 1,0161 tonne
Density pound per 1 g/cm3 0,0361 lb/cub.in 1 lb/cub.in 27,680 g/cm3

cubic inch
Force pound-force 1N 0,225 lbf 1 lbf 4,4482 N
Pressure, pounds per 1 MPa 145 psi 1 psi 6,8948 ¥ 103 Pa

stress square inch
Moment inch pound-force 1 Nm 8,85 in.lbf 1 in.lbf 0,113 Nm
Power foot-pound per 1W 0,7376 ft lbf/s 1 ft lbf/s 1,3558 W

second
horsepower 1 kW 1,36 HP 1 HP 0,736 kW
Temperature degree Celsius tC = 0,555 (tF – 32) Fahrenheit tF = 1,8 tC + 32
13
Principles of selection 1
and application
D e s i g n s ................................................................................................................. 16
Selection of Y-bearing unit type .............................................................................. 24
Selection of Y-bearing unit size ............................................................................... 30
Speeds .................................................................................................................. 38
Design of Y-bearing arrangements .......................................................................... 40
Lubrication and maintenance .................................................................................. 48
Mounting instructions ............................................................................................ 52

Mounting instructions for Y-bearing plummer block units
with a composite (Y-TECH) or cast housing and grub screws ............................................... 56
with a cast housing and an eccentric locking collar................................................................ 57
with a cast housing and an adapter sleeve ............................................................................. 58
with a pressed steel housing and grub screws ....................................................................... 60
with a pressed steel housing and an eccentric locking collar ................................................ 62
Mounting instructions for flanged Y-bearing units
with a composite (Y-TECH) or cast housing and grub screws ............................................... 64
with a composite (Y-TECH) or cast housing and an eccentric locking collar ......................... 65
with a cast housing and an adapter sleeve ............................................................................. 66
with a pressed steel housing and grub screws ....................................................................... 68
with a pressed steel housing and an eccentric locking collar ................................................ 70
Mounting instructions for Y-bearing take-up units
with a cast housing and grub screws ...................................................................................... 72
with a cast housing and an eccentric locking collar................................................................ 73
Storing Y-bearings and Y-bearing units ................................................................... 74
Designation systems .............................................................................................. 75
15
Designs
Fig. 1
Conventional SKF ball bearing units are referred
to as Y-bearing units. These units consist of:
• an insert bearing (a single row deep groove

ball bearing) with a convex sphered outside
diameter
• a housing, which has a correspondingly
sphered but concave bore
Y-bearing units can accommodate moderate

initial misalignment, but normally do not permit
axial displacement. They are ready-to-mount,
ready-to-use units († fig. 1) and available as:
• Y-bearing plummer block units

• Flanged Y-bearing units
• Y-bearing take-up units
The housings are available in: Fig. 2
• composite material († fig. 2)

• grey cast iron († fig. 3)
• sheet steel († fig. 4)
SKF Y-bearing units provide designers with con-

siderable freedom of choice so that comprom-
ises can be avoided. Numerous standard series
Y-bearing units are available († tables on pages
20 to 23). The tables list Y-bearings and Y-bearing
housings and their possible combinations to
units. For information about more specialized
Y-bearing units, refer to the sections, SKF Con-
Centra ball bearings and units and SKF Food Line
Y-bearing units starting on page 247.
16
Fig. 3
Because of their versatility and cost effective-
ness, Y-bearing units are typically found in the
following applications: agricultural machinery, 1
construction equipment, conveyor systems,
textile machines and fans as well as in machines
for food and beverage processing and
packaging.
Bearing terminology
For a better understanding of the information in
this catalog, see the next two pages for frequently
used bearing terms and their definitions for the
following products:
• Y-bearings
• Y-bearing plummer block units
• Flanged Y-bearing units Fig. 4
• Y-bearing take-up units
Essentially, these terms are in accordance with

those in the following ISO standards:
• ISO 3228:1993 Rolling bearings – Cast and

pressed housings for insert bearings
• ISO 9628:2006 Rolling bearings – Insert
bearings and eccentric locking collars
A detailed collection of bearing specific terms

and definitions are also listed in ISO 5593:1997
Rolling bearings – Vocabulary.
17
Designs
Y-bearings Fig. 5
Insert bearings, wide inner ring bearings

(† fig. 5)
3
2
1 Outer ring 1
2 Sphered outer surface 4
3 Lubrication hole 5
4 Inner ring 11
10 6
5 Bore
6 Cage 7
7 Ball 8
8 Integral seal 9
9 Flinger
10 Eccentric locking collar
11 Grub (set) screw
Inner ring with an eccentric locking collar
Inner ring with two grub screws
Inner ring with a tapered bore

(on an adapter sleeve)
Inner ring of a standard deep

groove ball bearing
18
Fig. 6 Y-bearing units
Mounted ball bea r i n g , u n i t b a l l
6 1
7 Y-bearing plummer (pillow) block unit
8
(† fig. 6a)
9 1 Y-bearing plummer block housing of grey
cast iron
4 5 2 Housing base
3 Housing suppor t face
4 Cast dimple for dowel pin
5 Attachment bolt hole
3 2 1 6 Y-bearing
a 7 Grease fitting
8 Recess for end cover
9 Filling slot for Y-bearing
Flanged Y-bearing unit († fig. 6b)

1 Square flanged housing of grey cast iron
6 2 Attachment bolt hole
3 Back of flanged housing with or without
centring recess
4 Cast dimple for dowel pin
5 Y-bearing
7 6 Grease fitting
5
4 8 Recess for end cover
8
3 Y-bearing take-up unit († fig. 6c)

1 Ta k e - u p h o u s i n g o f g r e y c a s t i r o n
2 Grease fitting
3 Y-bearing
2 1
4 Piloting groove
b 5 Recess for end cover
6 Receiving opening for adjustment screw
location
7 Centre bore for adjustment screw
4
5 6
8 7
1
19
Designs
Y-bearing Composite housings Cast housings

unit
Y-bearings SYK 5(00) FYK 5(00) FYTBK 5(00) SY (500) SYJ 5(00) SYH 5(00)
YAR 2-2F
SYK .. TF FYK .. TF FYTBK .. TF SY .. TF SYJ .. TF SYH .. TF
20–40 mm 20–40 mm 20–35 mm 12–65 mm 20–100 mm
in.1)
3/4–1 1/2 in.1)
3/4–1 1/4 1/2–2 15/16 in. 3/4–2 1/2 in. 1/2–2 7/16 in.
YAR 2-2RF
SYK .. TR FYK .. TR FYTBK .. TR SY .. TR
20–40 mm 20–40 mm 20–35 mm 20–60 mm 20–65 mm1) –
in.1)
3/4–1 1/2 in.1)
3/4–1 1/4 3/4–2 1/2in.1) in.1)
3/4–2 1/2
YAR 2-2RF/HV
20–40 mm1) 20–40 mm1) 20–35 mm1) 20–50 mm 20–50 mm –
in.1)
3/4–1 1/2 in.1)
3/4–1 1/2 in.1)
3/4–1 7/16 3/4–1 15/16
in. 3/4–1 15/16
in.
YAR 2-2RF/
VE495
20–40 mm1) 20–40 mm1) 20–35 mm1) 20–50 mm 20–50 mm –
YAT 2
20–40 mm1) 20–40 mm1) 20–35 mm1) 17–50 mm1) 20–50 mm1) –
YEL 2-2F
SY .. WF SYH .. WF
20–40 mm1) 20–40 mm1) 20–35 mm1) 20–60 mm 20–60 mm1)
17/16–1 15/16 in. 3/4–2 7/16 in.
YEL 2-2RF/
VL065
20–40 mm1) 20–40 mm1) 20–35 mm1) 20–40 mm1) 20–40 mm1) –
YET 2
SY .. FM SYH .. FM
20–40 mm1) 20–40 mm1) 20–35 mm1) 15–60 mm 20–60 mm1)
in.1)
3/4–1 1/2 in.1)
3/4–1 7/16 3/4–1 1/2in.1) in.1)
3/4–1 1/2 1–2 in.
YSA 2-2FK on
adapter sleeve SYJ .. KF
20–35 mm1) 20–35 mm1) 20–30 mm1) 20–60 mm1) 20–60 mm –
in.1)
3/4–1 1/4 in.1)
3/4–1 1/4 in.1)
3/4–1 3/16 in.1)
3/4–2 3/8 3/4–2 3/8in.1)
17262(00)
20–40 mm1) 20–40 mm1) 20–35 mm1) 17–60 mm1) 20–60 mm1) –
1) Parts must be ordered separately.
20
Y-bearing Cast housings
unit
Y-bearings SYM 5(00) SYF 5(00) SYFJ 5(00) FY (500) FYJ 5(00)
YAR 2-2F
SYM .. TF SYF .. TF SYFJ .. TF FY .. TF FYJ .. TF
20–50 mm 20–50 mm 12–65 mm 20–100 mm
1 7/16–3 in. 3/4–1 3/4in.1) 3/4–1 3/4in.1) 1/2–2 7/16in. 3/4–2 1/2in.1)
YAR 2-2RF
FY .. TR
– 20–50 mm1) 20–50 mm1) 20–60 mm 20–60 mm1)
in.1)
3/4–1 3/4 in.1)
3/4–1 3/4 3/4–2 1/2in.1) in.1)
3/4–2 1/2
YAR 2-2RF/HV
– 20–50 mm 20–50 mm 20–50 mm 20–50 mm
3/4–1 15/16
in. 3/4–1 15/16
in. 3/4–1 15/16
in. 3/4–1 15/16
in.
YAR 2-2RF/
VE495
– 20–50 mm 20–50 mm 20–50 mm 20–50 mm
YAT 2
– 20–50 mm1) 20–50 mm1) 17–50 mm1) 20–50 mm1)
YEL 2-2F
FY .. WF
– 20–50 mm1) 20–50 mm1) 20–60 mm 20–50 mm1)
1–2 7/16 in.
YEL 2-2RF/
VL065
– 20–40 mm1) 20–40 mm1) 20–40 mm1) 20–40 mm1)
YET 2
SYF .. FM SYFJ .. FM FY .. FM
– 20–50 mm 20–50 mm 15–60 mm 20–60 mm1)
3/4–1 1/2in.1) 3/4–1 1/2in.1) in.1)
3/4–2 3/16 in.1)
3/4–1 1/2
YSA 2-2FK on
adapter sleeve FYJ .. KF
– 20–45 mm1) 12–45 mm1) 20–60 mm1) 20–60 mm
in.1)
3/4–1 3/4 in.1)
3/4–1 3/4 in.1)
3/4–2 3/8 3/4–2 3/8 in.1)
17262(00)
– 20–50 mm1) 20–50 mm1) 17–60 mm1) 20–60 mm1)
21
Designs
Y-bearing Cast housings

flanged unit
Y-bearings FYM 5(00) FYT 5(00) FYTB 5(00) FYTJ (500) FYC 5(00)
YAR 2-2F
FYM .. TF FYT .. TF FYTB .. TF FYTJ .. TF FYC .. TF
12–50 mm 20–50 mm 20–65 mm
1 7/ 16–3 in. 1/ 2–2 3/ 16 in. 3/ 4–1 3/ 4
in. 3/ 4–1 3/ 4
in. in.1 )
3/ 4–2 1/ 2
YAR 2-2RF
FYTB .. TR
– – 20–50 mm 20–50 mm1) 20–65 mm1)
–1 3/4 in.1)
3/ 4 in.1)
3/4–1 3/4 in.1)
3/4–2 1/2
YAR 2-2RF/HV
– – 20–50 mm 20–50 mm 20–50 mm
3/4–1 15/16
in. 3/4–1 15/16
in. 3/4–1 15/16
in.
YAR 2-2RF/
VE495
– – 20–50 mm 20–50 mm 20–50 mm
YAT 2
FYT .. RM
– 17–50 mm1) 20–50 mm1) 20–50 mm1)
1/2–2 3/16 in.
YEL 2-2F
FYTB .. WF
– – 20–50 mm 20–50 mm1) 20–60 mm1)
YEL 2-2RF/
VL065
– – 20–40 mm1) 20–40 mm1) 20–40 mm1)
YET 2
FYT .. FM FYTB .. FM
– 15–50 mm 20–50 mm1) 20–40 mm1)
1/2–2 3/16 in. 3/4–1 1/2in.1) in.1)
3/4–1 1/2 in.1)
3/4–1 1/2
YSA 2-2FK on
adapter sleeve FYTJ .. KF
– – 20–45 mm1) 20–45 mm 20–60 mm1)
in.1)
3/4–1 3/4 3/4–1 3/4in. in.1)
3/4–2 3/8
17262(00)
– – 17–50 mm1) 20–50 mm1) 20–60 mm1)
22
Y-bearing Cast housings Pressed steel housings
unit
Y-bearings TU 5(00) TUJ 5(00) P 40 – P 85 PF 40 – 90 PFD 40 – 80 PFT 40 – 80
YAR 2-2F
TU .. TF TUJ .. TF
20–55 mm 20–60 mm 12–45 mm1) 12–50 mm1) 12–40 mm1) 12–40 mm1)
3/4–2 3/16in. 3/4–2 in.1) in.1)
1/2–1 3/4 in.1)
3/4–1 3/4 in.1)
3/4–1 1/2 in.1)
3/4–1 1/2
YAR 2-2RF
20–55 mm1) 20–60 mm1) 12–45 mm1) 20–35 mm1) 20–40 mm1) 20–40 mm1)
3/4–2 in.1) 3/4–2 in.1) in.1)
3/4–1 3/4 in.1)
3/4–1 3/4 in.1)
3/4–1 1/2 in.1)
3/4–1 1/2
YAR 2-2RF/HV
20–50 mm 20–50 mm 20–40 mm1) 20–40 mm1) 20–40 mm1) 20–40 mm1)
3/4–1 15/16
in. 3/4–1 15/16
in. in.1)
3/4–1 1/2 in.1)
3/4–1 1/2 in.1)
3/4–1 1/2 in.1)
3/4–1 1/2
YAR 2-2RF/
VE495
20–50 mm 20–50 mm 20–40 mm1) 20–40 mm1) 20–40 mm1) 20–40 mm1)
YAT 2
20–50 mm1) 20–50 mm1) 17–45 mm1) 17–50 mm1) 17–40 mm1) 17–40 mm1)
in.1)
5/8–1 3/4 in.1)
5/8–1 15/16 in.1)
5/8–1 1/2 in.1)
5/8–1 1/2
YEL 2-2F
20–55 mm1) 20–60 mm1) 12–45 mm1) 20–50 mm1) 20–40 mm1) 20–40 mm1)
1/2–1 3/4 in.1) in.1)
1/2–1 15/16 in.1)
1/2–1 1/2 in.1)
1/2–1 1/2
YEL 2-2RF/
VL065
20–40 mm1) 20–40 mm1) 20–40 mm1) 20–40 mm1) 20–40 mm1) 20–40 mm1)
YET 2
TU .. FM
20–55 mm 20–60 mm1) 15–45 mm1) 15–50 mm1) 15–40 mm1) 15–40 mm1)
3/4–1 1/2in.1) in.1)
3/4–1 1/2 in.1)
1/2–1 3/4 in.1)
3/4–1 3/4 in.1)
3/4–1 1/2 in.1)
3/4–1 1/2
YSA 2-2FK on
adapter sleeve
20–50 mm1) 20–55 mm1) 20–40 mm1) 20–45 mm1) 20–35 mm1) 20–35 mm1)
3/4–2 in.1) 3/4–2 1/8 in.1) in.1)
3/4–1 3/4 in.1)
3/4–1 3/4 in.1)
3/4–1 1/4 in.1)
3/4–1 3/4
17262(00)
20–55 mm1) 20–60 mm1) 17–45 mm1) 17–50 mm1) 17–40 mm1) 17–40 mm1)
23
Selection of Y-bearing
unit type
The SKF Y-bearing unit assortment is extensive. Keep in mind that the total cost of a bearing
It includes three designs with a choice of three arrangement and inventory considerations could
different materials for the housing and a variety also influence the final choice.
of Y-bearings that can be locked onto the shaft Other important criteria for designing a bear-
in very different ways. Because of their design, ing arrangement, such as load carrying capacity
each Y-bearing unit exhibits characteristic and rating life, lubrication, etc., will be dealt with
features that make it more or less suitable for in detail in the corresponding chapters.
a specific application.
For example, Y-bearing units with a pressed
steel housing are not capable of supporting
heavy loads, can only run at moderate speeds
and can not be relubricated. However, they are
economical and easy to mount. On the other
hand, housings made of grey cast iron can with-
stand significantly heavier radial, axial and shock
loads. In addition, cast housings have a grease
fitting for relubrication, making them a good
choice for applications with somewhat higher
speeds.
Since, in many cases, several factors have
to be considered when selecting a suitable
Y-bearing unit, there is no way to provide a
list of general rules. However, important factors
that should be considered include:
• location on the shaft

• loads
• seals
• permissible operating temperatures
• speeds
24
Fig. 1
Locating on the shaft
There is a choice of five different methods 1
(† fig. 1) by which an SKF Y-bearing unit can
be located onto the shaft:
• Grub screws (a). This method enables very

easy mounting and dismounting, even
if space is limited. This locking method is
typically used in applications where the shaft
a alternates direction of rotation.
• Eccentric locking collar (b). This locking method
is typically used for applications where the
shaft rotates in one direction only. It can be
used for alternating directions when loads
and speeds are low.
• Adapter sleeve locking (c). This method enables
a concentric locking of the Y-bearing unit on
the shaft and is appropriate for alternating
as well as constant direction of rotation.
b • SKF ConCentra locking (d). This method
enables true concentric locking on the shaft.
It is appropriate for alternating, as well as
constant direction of rotation. For additional
information about SKF ConCentra ball bear-
ings and units refer to the dedicated chapter
on page 247.
• Interference fit (e). The use of an interference
fit is only available for Y-bearings in the
17262(00)-2RS1 and 17263(00)-2RS1 series.
c These bearings and the required housings
have to be ordered separately.
25
Selection of Y-bearing unit type
Loads Fig. 2
The magnitude of the load is the factor that

usually determines the size of the Y-bearing
unit to be used. Generally, units with housings
made from grey cast iron or composite material
can withstand heavier loads than units with
pressed sheet steel housings. Magnitude of load
is defined as:
• P ≤ 0,02 C – very light load

• 0,02 C < P ≤ 0,035 C – light load
• 0,035 C < P ≤ 0,05 C – moderate load
• 0,05 C < P ≤ 0,1 C – normal load
• P > 0,1 C – heavy load
Radial loads
In applications where normal to heavy loads
occur, only Y-bearing units with housings made
from grey cast iron or composite material should
be used. These units are able to withstand the
same dynamic and static loads as their insert
bearings and are less sensitive to shock loads
(† fig. 2a).
Y-bearing units with a pressed steel housing
are designed to withstand light to moderate loads
and are not able to accommodate shock loads a b
(† fig. 2b).
Axial loads
The axial load carrying capacity of a Y-bearing
depends not as much on its internal design as
on the way it is locked onto the shaft († fig. 2c)
as described in the chapter Axial load carrying
ability, page 34. In general, Y-bearing units with
housings made from grey cast iron or composite
material are more suitable for heavier or alter-
nating axial loads.
Y-bearing units with a pressed sheet steel
housing are only intended for light axial loads, in
particular the plummer block units incorporating
a rubber seating ring († fig. 2d).
c d
26
Fig. 3
Seals
The factors that influence the choice of the 1
most appropriate sealing method include:
• the peripheral speed at the sealing

counterface
• the friction in the seal and the resulting
temperature increase
• the operating environment, e.g. moisture,
dust or coarse contaminants
• the requirements regarding efficiency
a
The standard integral seal used in SKF
Y-bearing units provides good protection against
moisture and contaminants and also provides
reliable retention of the lubricant († fig. 3a).
The same applies to RS1 contact seals that are
integral to Y-bearings with a normal inner ring
in the 17262(00)-2RS1 and 17263(00)-2RS1
series († fig. 3b).
For more contaminated conditions, Y-bearing
units fitted with plain steel flingers outside the
integral seal should be used († fig. 3c). The
flingers have an interference fit on the inner ring
b
and considerably enhance the sealing effect
without increasing friction.
Where operating conditions are extremely
contaminated and long service life is required,
Y-bearing units with the highly efficient multiple
seal are recommended. Here, the sealing effi-
ciency of the standard integral seal is reinforced
by a steel flinger with a vulcanized sealing lip
(† fig. 3d).
27
Selection of Y-bearing unit type
Permissible operating
temperatures
The permissible operating temperatures for a
Y-bearing unit are determined primarily by the
bearing, the cage material, the seal material(s)
and the grease with which it is lubricated.
The temperature ranges for the greases are:
• –30 to +120 °C for all standard Y-bearings

and Y-bearing units that are filled with a
grease that has a lithium-calcium thickener1)
• –45 to +150 °C for HV and VE495 Y-bearing
variants that are filled with a food-grade
grease2)
• –20 to +140 °C for Y-bearings with a hexa-
gonal bore in the YHB 2 and YHC 2 series
that are filled with a grease that has a lithium-
complex soap thickener3)
(designation suffix VT357)
• 40 to 55 °C for maintenance-free operation
at moderate loads (P ≤ 0,05 C) and speeds
All standard Y-bearings are fitted with an injection

moulded snap-type cage of glass fibre reinforced
polyamide 6,6. These cages exhibit excellent
performance characteristics in a variety of
applications where operating temperatures
do not exceed 120 °C.
Contact seals can be used at operating tem-
peratures between –30 and +100 °C. Tempera-
tures up to 120 °C are also possible for brief
periods.
1)
The temperature range for reliable operation in accordance
with the “SKF traffic light concept” is between 10 and 120 °C.
2) The temperature range for reliable operation in accordance
3)
The temperature range for reliable operation in accordance
28
Speeds
The speed at which a Y-bearing or a Y-bearing 1
unit can operate depends mainly on:
• the method used to attach it to the shaft

• the sealing arrangement
For Y-bearings that are locked onto a shaft with

grub screws or an eccentric locking collar, the
permissible speed of the bearing is determined
by its fit on the shaft. The looser the fit, the
lower the speed.
If a Y-bearing is mounted on an adapter
sleeve, with an interference fit (bearings in the
17262(00) or 17263(00) series), or with SKF
ConCentra locking, the permissible speed is
much higher than if another locating method is
used. Their concentric fit also provides a low
vibration level and quiet running († chapter
Speeds, starting on page 38).
Because of the relubrication requirements
in applications with relatively high speeds
(† chapter Lubrication and maintenance,
starting on page 48), SKF recommends using
Y-bearing units that can be relubricated.
Application note
Because of their special properties, SKF Y-bearing
units are used in applications in virtually every
industry. If however, they are to be used in an
application where health, safety, or the environ-
ment is at risk, the SKF application engineering
service should be contacted during the design
phase.
This is also true for applications with relatively
high speeds and where machine downtime can
cause significant problems.
29
Selection of Y-bearing
unit size
Load carrying ability and life Selecting the bearing unit

The size of a Y-bearing or Y-bearing unit required
size using life equations
for a specific arrangement is determined by To select a Y-bearing or a Y-bearing unit size,
the loads that will occur in the application and the basic rating life is typically calculated
the required life needed for the application. in accordance with ISO 281:2007. The equation
Variables known as load ratings are used in for ball bearings is
bearing calculations as a measure of the load
carrying ability: the basic dynamic load rating
q C w3
C and the basic static load rating C0. The basic L10 = ––
<Pz
dynamic load rating is based on specifications
determined in ISO 281:2007 while the basic
static load rating is based on specifications If speed is constant, the basic rating life
determined in ISO 76:2006. expressed in operating hours can be obtained
using
1 000 000 q C w3
L10h = ––––––––– ––
60 n <Pz
or
1 000 000
L10h = ––––––––– L10
60 n
where
L10 = basic rating life (at 90% reliability),
millions of revolutions
L10h = basic rating life (at 90% reliability),
operating hours
C = basic dynamic load rating, kN
P = equivalent dynamic bearing load, kN
n = rotational speed, r/min
30
This method is usually adequate for selecting
the size of Y-bearings or Y-bearing units, as it
is based on experience. If reference experience 1
regarding requisite life and operational reliability
is not available, the values provided in table 1 for
the basic rating life L10h can be used as guidelines.
To fully exploit the life of a Y-bearing or
a Y-bearing unit, the modified life equation in
accordance with ISO 281:2007 should be used
to calculate the SKF rating life.
SKF rating life

In the SKF rating life equation, the stresses
resulting from external loads are considered,
together with the stresses caused by the surface
topography, lubrication and kinematics of the
rolling contact surfaces. Taking the influence of
this combined stress system into account pro-
vides a better prediction of the actual perform-
ance of the Y-bearing or Y-bearing unit in
a particular application.
For additional information about the SKF
rating life and its calculation refer to the:
• SKF General Catalogue

• SKF Interactive Engineering Catalogue
available online at www.skf.com
The SKF Interactive Engineering Catalogue

allows different bearing lives to be calculated
online.
Table 1
Guideline values of requisite basic rating life L10h for Y-bearings and Y-bearing units
Type of machine Requisite basic

rating life L10h
operating hours
Machines used for short periods or intermittently
Agricultural and ancillary transport equipment 1 000 to 2 000
Other agricultural equipment 4 000 to 8 000
Machines used 8 hours per day but not always fully utilized
Belt conveyors 12 000 to 20 000
Machines used 8 hours per day and fully utilized
Light duty fans, textile machinery 20 000 to 30 000
31
Selection of Y-bearing unit size
Equivalent dynamic Fig. 1
bearing load
The equivalent dynamic bearing load is defined
as that hypothetical radial load, constant in
magnitude and direction, which, if applied,
would have the same influence on bearing life as
the actual load to which the bearing is subjected
(† fig. 1).
If the bearing load F is constant in magnitude
and direction and acts radially, then P = F and
the load can be inserted directly into the life
equation. In all other cases, the equivalent
dynamic bearing load must be calculated.
Constant bearing load

Y-bearings and Y-bearing units are often
subjected to simultaneously acting radial and Table 2
axial loads. If the resultant load is constant in Calculation factors

magnitude and direction, the equivalent dynam- Relative Y-bearing series
ic bearing load P can be obtained from the gen- thrust YAT, YAR, YET, 17262(00),
eral equations load YEL, YSA, YSP 17263(00)
f0 Fa/C0 e X Y e X Y
P = Fr when Fa/Fr ≤ e 0,172 0,29 0,46 1,88 0,19 0,56 2,30

P = X Fr + Y Fa when Fa/Fr > e 0,345 0,32 0,46 1,71 0,22 0,56 1,99
0,689 0,36 0,46 1,52 0,26 0,56 1,71
where 1,03 0,38 0,46 1,41 0,28 0,56 1,55
P = equivalent dynamic bearing load, kN 1,38 0,40 0,46 1,34 0,30 0,56 1,45
2,07 0,44 0,46 1,23 0,34 0,56 1,31
Fr = actual radial bearing load, kN
Fa = actual axial bearing load, kN 3,45 0,49 0,46 1,10 0,38 0,56 1,15
5,17 0,54 0,46 1,01 0,42 0,56 1,04
X = radial load factor for the bearing 6,89 0,54 0,46 1,00 0,44 0,56 1,00
Y = axial load factor for the bearing
e = limiting value for Fa/Fr
and with reference to tables 2 and 3

C0 = basic static load rating, kN Table 3
f0 = bearing-dependent calculation factor Calculation factor f0
Y-bearing series Factor f0

The limiting value e and the load factors X and Y (sizes)
required to calculate the equivalent bearing load
for Y-bearings and Y-bearing units can be found YAT, YAR, YET, YEL, YSA, YSP
in table 2. As for deep groove ball bearings, it 203 – 204 13
205 – 212 14
depends on the value of the relative thrust load 213 – 218 15
f0 Fa/C0. 220 14
17262(00)
03 – 04 13
05 – 12 14
17263(00)
05 12
06 – 10 13
32
Diagram 1 Fluctuating bearing load
Mean load within a duty interval In applications where the load varies over time,
both in magnitude and direction, bearing life 1
cannot be calculated without first calculating the
equivalent load related to the variable (or fluctu-
F
ating) load conditions. To do this, refer to the
Fm
section Life calculation with variable operating
conditions in the SKF General Catalogue or
Fmax online in the SKF Interactive Engineering
Catalogue at www.skf.com.
Fmin
Mean load within a duty interval

U
Within each loading interval, the operating
conditions can vary slightly from the nominal
value. Assuming that the operating conditions,
e.g. speed and load direction, are fairly constant
and the magnitude of the load constantly varies
Diagram 2 between a minimum value Fmin and a maximum
Rotating load value Fmax († diagram 1), the mean load can
be obtained from
F1 Fmin + 2 Fmax
Fm = –––––––––––
3
Rotating load
If, as illustrated in diagram 2, the load on the
bearing consists of a load F1 which is constant
F2
in magnitude and direction (e.g. the weight of
a rotor) and a rotating constant load F2 (e.g.
an unbalanced load), the mean load can be
obtained from
Fm = fm (F1 + F2)
Diagram 3
Diagram #
Values for the factor fm can be obtained from
53.01 - Diagram caption heading
diagram 3.
1 ,0
fm
0 ,9 5
0 ,9 0
0 ,8 5
0 ,8 0
0 ,7 5
0 ,7 0
0 0 ,2 0 ,4 0 ,6 0 ,8 1 ,0
F1
F1 + F2
33
Dynamic bearing loads Fig. 2
When dete r m i n i n g a d d iti o n a l, e x t e r n a l d y n a m i c

f o r c e s , e . g . a n u n b a l a n c e d c o n d iti o n , it m i g h t b e
n e c e s s a r y t o r e l y o n e s ti m a t e s b a s e d o n e x p e r i -
e n c e g a i n e d w it h s i m il a r m a c h i n e s o r b e a r i n g
a r r a n g e m e n t s.
I n b e l t - d r i v e n a p p li c a ti o n s , t h e e f f e c ti v e b e l t
p u ll ( c i r c u m f e r e n ti a l f o r c e ), w h i c h i s d e p e n d e n t
o n t h e t r a n s m it t e d t o r q u e , m u s t b e t a k e n i n t o
a c c o u n t . T o d o t h i s , t h e b e l t p u ll m u s t b e m u l ti -
p li e d b y a f a c t o r t h a t i s d e p e n d e n t o n t h e t y p e
o f b e l t , it s p r e l o a d , t e n s i o n a n d a n y a d d iti o n a l
d y n a m i c f o r c e s . V a l u e s a r e u s u a ll y p u b li s h e d b y
b e l t m a n u f a c t u r e r s . H o w e v e r, s h o u l d i n f o r m a -
ti o n n o t b e a v a il a b l e , t h e f o ll o w i n g v a l u e s c a n
b e a p p li e d :
• Toothed belts 1,1 to 1,3 Axial load carrying ability

• V-belts 1,2 to 2,5
• Flat belts 1,5 to 4,5 The axial load carrying ability of a Y-bearing
or Y-bearing unit depends not so much on its
T h e l a r g e r v al u e s a p p ly w h e n t h e a r c o f c o n t a c t internal design as on the way it is locked onto
i s s m a ll, f o r h e a v y o r s h o c k - t y p e d u t y , o r w h e r e the shaft.
b e lt t e n s i o n i s h i g h . For Y-bearings and Y-bearing units with
grub screws or an eccentric locking collar, the
maximum axial load that they can support is
Requisite minimum load approximately 20% of the basic dynamic load
rating if an unhardened shaft is used and the
If Y - b e a r i n g s o r Y - b e a r i n g u n it s a r e t o o p e r a t e grub screws are properly tightened.
s a ti s f a c t o r il y , t h e y m u s t a l w a y s b e s u b j e c t e d t o When a Y-bearing is mounted on an adapter
a m i n i m u m r a d i a l l o a d . A r u l e o f t h u m b i n d ic a t e s sleeve, its axial load carrying ability depends on
t h a t t h i s l o a d s h o u l d c o r r e s p o n d t o 0,01 C. the amount of torque used to tighten the lock
The importance of imposing this load increases nut. If the torque prescribed in table 2 on
where accelerations in the bearing are high, and page 55, is used, the axial load carrying ability
where speeds are in the region of 75% or more will be between 15 and 20% of the basic dynamic
of the limiting speed quoted in the product tables. load rating.
The weight of the components supported by Where the inner rings are supported by an
the Y-bearing unit, together with external forces, abutment on the shaft († fig. 2), the axial load
normally exceed the requisite minimum load. carrying ability depends on the nature of this
abutment. Generally, however, the axial load
on the bearing should not exceed 0,25 C0.
Additional information about the axial load
carrying ability of Y-bearing units is provided
in the appropriate chapters of this catalog.
34
Selecting the bearing unit
size using the static load 1
carrying capacity
A Y-bearing or Y-bearing unit size should be
determined on the basis of the static load rating
C0, instead of bearing life, when one of the
following conditions exists:
• The bearing is stationary and subjected to

continuous or intermittent (shock) loads.
• The bearing makes slow oscillating or align-
ment movements under load.
• The bearing rotates under load at a very slow
speed (n < 10 r/min) and is not required to
have a long service life. In this case, the life
equation for a given equivalent load P would
give such a low requisite basic dynamic load
rating C that the bearing selected on a life
basis would be seriously overloaded in service.
• The bearing rotates and, in addition to the
normal operating loads, has to sustain heavy
shock loads that act during a fraction of
a revolution.
In all these cases, the permissible load for a

Y-bearing is determined by the load that will
cause permanent deformations to the ball/race-
way contacts and is not determined by material
fatigue. Heavy loads acting on a stationary or
slowly oscillating bearing, or shock loads on
a rotating bearing, produce flattened areas on
the balls and indentations on the raceways.
The indentations may be irregularly spaced
around the raceway, or may be evenly spaced
at positions corresponding to the spacing of
the balls. If the load acts for several revolutions,
the deformation will be evenly distributed over
the whole raceway.
The extent to which this damage is detrimental
to bearing performance depends on the applica-
tion and the demands placed on the bearing.
To prevent or minimize this type of damage,
Y-bearing units with a sufficiently high static
load carrying capacity should be selected.
When determining the Y-bearing or Y-bearing
unit size based on static load carrying capacity, a
given safety factor s0, which represents the rela-
tionship between the basic static load rating C0
and the equivalent static bearing load P0, is used
to calculate the requisite basic static load rating.
35
Equivalent static bearing load Requisite static load rating

An equivalent static bearing load is defined as The requisite basic static load rating C0 can be
the hypothetical load which, if applied, would determined from
cause the same maximum rolling element load
in the bearing as the actual loads. The equiva- C0 = s0 P0
lent static bearing load for Y-bearings and
Y-bearing units is obtained from the general where
equation C0 = basic static load rating, kN
P0 = equivalent static bearing load, kN
P0 = 0,6 Fr + 0,5 Fa s0 = static safety factor
where Experience based guideline values of the static

P0 = equivalent static bearing load, kN safety factor s0 for Y-bearings and Y-bearing
Fr = actual radial bearing load, kN units are provided in table 4.
Fa = actual axial bearing load, kN
If P0 < Fr, calculate with P0 = Fr.
NOTE: When calculating P0, the maximum load

that can occur should be used and its radial and
axial components inserted in the equation
above. If a static load acts in different directions
on a bearing, the magnitude of these
components will change. In these cases, the
components of the load giving the largest value
of the equivalent static bearing load P0 should
be used.
Table 4
Guideline values for static safety factor s0
Type of operation Required static

safety factor s0
Normal loads and smooth, vibration-free operation,

where noise levels are not specified, and speeds are
very low ≥ 0,5
Normal loads and smooth, vibration-free operation,

where noise levels are normal ≥1
Normal loads and high degree of running accuracy,

where low noise levels are specified ≥2
Pronounced shock loads, very slow or non-rotating bearings ≥2
36
Checking the static load carrying
capacity
For dynamically loaded bearings that have been 1
selected based on requisite life, it is advisable,
where the equivalent static bearing load P0 is
known, to check that the static load carrying
capacity is adequate using
s0 = C0/P0
If the s0 value obtained is less than the recom-

mended guideline value († table 4), then a
larger Y-bearing or Y-bearing unit should be
selected.
37
Speeds
The speed at which a Y-bearing or Y-bearing The limiting speeds for Y-bearings and
unit can operate depends mainly on the type Y-bearing units for inch shafts are the same
of seal that is used and the method used to lock as those for the corresponding metric bearing.
the bearing onto the shaft. The permissible
operating speed also depends on the shaft
tolerance in applications with:
• Y-bearings with grub screws, YAT 2 and

YAR 2-2F series
• Y-bearings with an eccentric locking collar,
YET 2 and YEL 2-2F series
The higher the figure following the tolerance

symbol h, the lower the permissible speed.
Guideline values for the limiting speeds are
provided in table 1.
For bearings with multiple seals (2RF design),
the limiting speed is about 60% of the values
quoted in table 1 for bearings mounted on an
h6 tolerance shaft. For the following bearings,
the limiting speed depends on the seals:
• Y-bearings with a tapered bore on an adapter

sleeve, YSA 2-2FK + H 23 series
• Y-bearings with a standard inner ring,
17262(00)-2RS1 and 17263(00)-2RS1
series
• Y-bearings with SKF ConCentra locking, used
in SKF ConCentra ball bearing units only
The values for the limiting speed are provided in

the product tables and in table 1 to enable easy
comparison.
38
Table 1
Limiting speeds for Y-bearings

1
YAT, YAR YET, YEL YSA + H 23 1726...
Bearing Limiting speed for Y-bearings in the series Limiting speed for
size1) YAT 2, YAR 2, YET 2, YEL 2 YSA 2 K 17262(00) 17263(00) SKF ConCentra ball
for shafts machined to tolerance + H 23 bearing units
h6 h7 h8 h9 h11
– r/min
03 9 500 6 000 4 300 1 500 950 – 12 000 – –

04 8 500 5 300 3 800 1 300 850 – 10 000 – –
05 7 000 4 500 3 200 1 000 700 7 000 8 500 7 500 7 000
06 6 300 4 000 2 800 900 630 6 300 7 500 6 300 6 300

07 5 300 3 400 2 200 750 530 5 300 6 300 6 000 5 300
08 4 800 3 000 1 900 670 480 4 800 5 600 5 000 4 800
09 4 300 2 600 1 700 600 430 4 300 5 000 4 500 4 300

10 4 000 2 400 1 600 560 400 4 000 4 800 4 300 4 000
11 3 600 2 000 1 400 500 360 3 600 4 300 – 3 600
12 3 400 1 900 1 300 480 340 3 400 4 000 – 3 400

13 3 000 1 700 1 100 430 300 3 000 – – 3 000
14 2 800 1 600 1 000 400 280 – – – –
15 2 600 1 500 950 380 260 – – – 2 600

16 2 400 1 400 900 360 240 – – – –
17 2 200 1 300 850 340 220 – – – –
18 2 000 1 200 800 320 200 – – – –

20 1 900 1 100 750 300 190 – – – –
1)
For example: bearing size 06 includes all bearings based on a Y 206 bearing, such as YAR 206-2F, YAR 206-101-2F,
YAR 206-102-2F, YAR 206-103-2F, YAR 206-104-2F
39
Design of Y-bearing
arrangements
Axial displacement
Y-bearing units do not accommodate axial dis-
placement of the shaft and are therefore not
normally suitable for non-locating bearing
(free unit) arrangements. The distance between
bearing positions should therefore be short or Fig. 1
the units should be supported by resilient sheet

metal support surfaces or walls to prevent them
from being subjected to excessive stresses as a
result of thermal elongation of the shaft
(† fig. 1).
In applications where there are low speeds,
light loads, and the distance between the bearing
positions is too long or the operating tempera-
tures too high and one bearing position has to
accommodate thermal elongation of the shaft,
the following arrangement is recommended.
The shaft on the non-locating side should be
provided with one or two grooves 120° apart,
to engage one of the following:
• grub screws with a finger, e.g. in accordance

with ISO 4028:2003, but with fine thread
according to table 1, secured by a nut and
spring washer or star lock washer († fig. 2)
• flat head screws in accordance with
ISO 1580:1994, but with fine thread
according to table 1, locked with a spring or
star lock washer († fig. 3)
The finger(s) and groove(s) accommodate

changes in shaft length and prevent relative
rotational movements between the shaft and
bearing bore. To help provide trouble-free oper-
ation, the ends of the grub screws should be
ground and the sliding surfaces in the shaft
grooves coated with a lubricant paste.
40
Fig. 2 Fig. 3
Table 1
Threaded holes in the inner ring of YAR and YAT bearings
G2
d1
Bearing Outer Threaded holes

size1) diameter of YAR bearing with YAR bearing with YAT bearing with YAT bearing with
inner ring metric bore inch bore metric bore inch bore
d1 G2 G2 G2 G2
– mm –
03 24,2 M 6 ¥ 0,75 #10-32 UNF M 6 ¥ 0,75 #10-32 UNF

04 28,2 M 6 ¥ 0,75 1 /4 "-28 UNF M 6 ¥ 0 ,7 5 1/ 4"-28 UNF
05 33,7 M 6 ¥ 0,75 1/4"-28 UNF M 6 ¥ 0,75 1/4"-28 UNF
06 39,7 M 6 ¥ 0,75 1/4"-28 UNF M 6 ¥ 0,75 5/16"-24 UNF

07 46,1 M 6 ¥ 0,75 5/16"-24 UNF M 6 ¥ 0,75 5/16"-24 UNF
08 51,8 M8¥1 5/16"-24 UNF M 6 ¥ 0,75 5/16"-24 UNF
09 56,8 M8¥1 5/16"-24 UNF M 6 ¥ 0,75 5/16"-24 UNF

10 62,5 M 10 ¥ 1 3/8"-24 UNF M8¥1 3/8"-24 UNF
11 69,1 M 10 ¥ 1 3/8"-24 UNF – 3/8"-24 UNF
12 75,6 M 10 ¥ 1 3/8"-24 UNF – 3/8"-24 UNF

13 82,5 M 10 ¥ 1 3/8"-24 UNF – –
14 87 M 10 ¥ 1 7/16"-20 UNF – –
15 92 M 10 ¥ 1 7/16"-20 UNF – 3/8"-24 UNF

16 97,4 M 10 ¥ 1 7/16"-20 UNF – 3/8"-24 UNF
17 105 M 12 ¥ 1,5 – – –
18 112,5 M 12 ¥ 1,5 – – –
20 124,8 M 12 ¥ 1,5 – – –
1)
For example: bearing size 06 includes all bearings based on a Y 206 bearing, such as YAR 206-101-2F, YAR 206-102-2F,
YAR 206-2F, YAR 206-103-2F, YAR 206-104-2F
41
Design of Y-bearing arrangements
Misalignment Fig. 5
Y - b e a r i n g u n it s c a n a c c ommodate initial mis-

alignment († fig. 4) of up to:
• 5° when relubrication is not required

• 2° when relubrication is required
Additionally, operational shaft deflections of

a few minutes of arc can be permitted.
Y-bearing units with pressed steel housings
cannot accommodate misalignment once the
attachment bolts have been fully tightened,
unless they are equipped with a rubber seating
ring († page 45).
Support surfaces
To maximize the service life of Y-bearing units,
the support surfaces must be manufactured
with:
• a roughness of Ra ≤ 12,5 µm
• a flatness (planicity) tolerance to IT7 or IT8
When a heavy load, parallel to the housing base,

acts on a Y-bearing unit († fig. 5) SKF recom-
mends doweling the housing to the support
surface. The position and size of the holes for
the dowel pins are listed in the relevant product
sections.
Fig. 4
5°
42
Attaching to the support Fig. 6
surface 1
T o attach Y-bearing units to the support surface,
SKF recommends using 8.8 class bolts or studs
and a washer to ISO 7089:2000 or 7090:2000
and a spring washer. Hexagonal head bolts in
accordance with ISO 4014:1999 are appropriate. h6 h7 h8 h9
Alternatively, hexagonal socket head cap screws h 10 h 11
in accordance with ISO 4762:1988 can be used.
Appropriate fastener sizes are listed in the
product tables.
Shaft tolerances
Recommended fits for Y-bearings are listed in
table 2.
For moderate loads (0,035 C < P ≤ 0,05 C) the Table 2
shaft seats for Y-bearings with grub screws or Recommended fits

an eccentric locking collar should be machined Operating conditions Tolerance
to an h7 tolerance. For light loads and low
speeds, an h8 shaft tolerance is sufficient and, Y-bearings with grub screws
for very simple applications, h9 to h11 shaft or an eccentric locking collar
tolerances may be used. Fig. 6 illustrates the P > 0,05 C and/or high speeds h6
location of the most commonly used ISO shaft 0,035 C < P ≤ 0,05 C h7
tolerance grades for Y-bearings with grub 0,02 C < P ≤ 0,035 C and/or low speeds h8
screws or an eccentric locking collar. The values
of these ISO tolerances are listed in table 3a, Simple bearing arrangements
or P ≤ 0,02 C h9 – h11
page 44.
Y-bearings with a tapered bore on
an adapter sleeve or Y-bearings with
SKF ConCentra locking
All loads and speeds h9/IT5
Y-bearings with a standard inner ring

P > 0,035 C
Shaft diameter ≤ 17 mm j5
Shaft diameter ≥ 20 mm k5
P ≤ 0,035 C
Shaft diameter ≥ 20 mm j6
43
Table 3b
ISO shaft tolerances for Y-bearings with a standard

inner ring
Shaft Deviations of shaft diameter

diameter
d j5 j6 k5
Deviation
over incl. high low high low high low
mm µm
10 18 +5 –3 +8 –3 +9 +1
18 30 +5 –4 +9 –4 +11 +2
30 50 +6 –5 +11 –5 +13 +2
50 80 +6 –7 +12 –7 +15 +2
F or Y-bearings on an adapter sleeve or

Y-bearings with SKF ConCentra locking, a shaft
seat machined to h9/IT5 tolerance is adequate.
The values for h9 ISO tolerances are listed in
table 3a.
For Y-bearings with a standard inner ring, the
same recommendations apply as for standard
deep groove ball bearings († table 2, page 43).
The values of these ISO tolerances are listed in
table 3b.
Table 3a
ISO shaft tolerances for Y-bearings, except for Y-bearings with a standard inner ring
Shaft Deviations of shaft diameter

diameter
d h6 h7 h8 h9 h10 h11
Deviation
over incl. high low high low high low high low high low high low
mm µm
10 18 0 –11 0 –18 0 –27 0 –43 0 –70 0 –110

18 30 0 –13 0 –21 0 –33 0 –52 0 –84 0 –130
30 50 0 –16 0 –25 0 –39 0 –62 0 –100 0 –160
50 80 0 –19 0 –30 0 –46 0 –74 0 –120 0 –190

80 120 0 –22 0 –35 0 –54 0 –87 0 –140 0 –220
44
Rubber seating rings Fig. 7
R ubber seating rings in the RIS 2 series 1

(† fig. 7) are primarily intended to “cushion”
Y-bearings in pressed steel plummer block
housings. Located between the bearing outer
ring and housing bore, they dampen vibration
and noise († fig. 8) and enable the bearings
to be displaced slightly in their housings to
accommodate small shaft elongation or
misalignment.
For some applications, rubber seating rings
may be fitted to the Y-bearing outer rings to
convert Y-bearings to support rollers, and serve
as tyres, and to run quietly and protect the
counter surfaces († fig. 9).
The seating rings in the RIS 2 series are made
from acrylonitrile-butadiene rubber (NBR) and
have a convex sphered outside diameter. The Fig. 8
rings can operate at temperatures from –30 to

+100 °C.
The product tables for Y-bearing units with
a pressed steel plummer block housing are listed
with their individual components, e.g. housing,
Y-bearing and rubber seating ring.
The designation and the dimensions of rubber
seating rings are listed in table 4.
Fig. 9
45
Table 4
Rubber seating rings
C
B
D 1 d1 d2
Y-bearing Rubber seating ring

Outside Dimensions Mass Designation Suitable Y-bearing
diameter Size
D D1 d1 d2 B C
mm mm g – –
40 47,3 35,5 39,8 12 18 12 RIS 203 03
47 52,3 41,2 46,8 14 19 11,5 RIS 204 04
52 62,3 46,4 51,8 15 20,5 26,5 RIS 205 05
62 72,3 54,6 61,8 18 21,5 31 RIS 206 A 06
72 80,3 63,7 71,8 19 23 32 RIS 207 A 07
80 85,3 70,7 79,7 21 24 26 RIS 208 A 08
46
End covers Fig. 11
A5
To protect the bearing arrangement at the end 1
of a shaft, and to avoid the possibility of an
accident caused by an exposed shaft end, end
covers are available for all composite Y-bearing
units and for most cast Y-bearing units.The end
covers are made from polypropylene (PP) , have
good resistance to most chemicals and can
withstand operating temperatures up to 100 °C.
They can be snapped into the recesses provided
in the housing bore.
Three different end cover designs are
available:
• ECY, a black end cover for shaft ends

(† fig. 10)
• ECW († fig. 12) for composite, cast iron,
zinc-coated and stainless steel SKF Food Line Fig. 12
Y-bearing units
• ECL (fig. 13) for some of the composite SKF
Food Line Y-bearing units identified by the
suffix L in the designation
In the product tables, the end covers are listed

together with those units that can accommodate
them. The designation of the end cover is listed
together with the distance A5 that the end cover
protrudes from the housing († fig. 11).
For additional information about the end cov-
ers for Y-bearing units for the food industry
refer to SKF Food Line Y-bearing units brochure
(PUB BU/P1 10844/1 EN – September 2011).
Fig. 10 Fig. 13
47
Lubrication and
maintenance
Grease fills Relubrication

S tandard SKF Y-bearings and Y-bearing units Relubrication of Y-bearing units is not required if:
are filled with a high-quality, long-lasting min-
eral oil based grease that has a lithium-calcium • loads and speeds are moderate
thickener. This grease has a consistency of 2 on • vibration does not occur
the NLGI scale. This grease is extremely water • operating temperatures are between 40 and
resistant and will provide long service life even 55 °C
under heavy loads. The properties of this grease
are listed in table 1. Y-bearing units with a pressed steel housing
YAR 2-2RF/HV series Y-bearings made of are not equipped with a grease fitting and there-
stainless steel and YAR 2-2RF/VE495 series fore cannot be relubricated.
Y-bearings with zinc coated rings and stainless Relubrication will enable the bearing to realize
steel flingers are filled with a special food-grade maximum service life in cases and applications
grease. This grease fulfils the requirements listed where Y-bearings or Y-bearing units:
in the Guidelines of section 21 CFR 178.3570 of
the FDA (US Food and Drug Administration) • are exposed to high humidity or severe
regulations. It is approved by the USDA (United contamination
States Department of Agriculture) for Category • have to accommodate heavy loads
H1 use (occasional contact with food stuffs). This • have to operate at high speeds or at tempera-
food-grade grease shows very good rust inhibit- tures above 55 °C for extended periods
ing properties, good water resistance and anti-
wear characteristics as well as high ageing and When relubricating, grease should be pumped
oxidation resistance. The properties of this slowly into the running bearing until fresh grease
grease are listed in table 1. starts to escape from the seal.
Y-bearings with a square or hexagonal bore NOTE: Excessive pressure from pumping too
are filled with a premium quality grease, which quickly may damage the seals.
has good water and corrosion resistant proper- Detailed information about SKF bearing
ties and provides excellent lubrication at high greases can be found in the catalogue MP3000
operating temperatures (designation suffix SKF Maintenance and Lubrication Products or
VT357). The properties of this grease are listed online at www.skf.com.
in table 1.
48
Relubricating Y-bearing units with
cast housings
To relubricate Y-bearing units with cast hous- 1
ings, SKF LGWA 2, LGMT 2 or LGMT 3 greases
can be used. Each of these greases is fully com-
patible with the original grease fill from the
factory.
Y-bearing units with a cast housing for inch
shafts larger than 1 inch (i.e. units comprising a
housings with designation suffix U) are equipped
with a grease fitting with a 1/8 NPT thread. All
other Y-bearing units with a cast housing are
equipped with a grease fitting with a 1/4-28
SAE-LT thread. The hole for the grease fitting
has a 1/4-28 UNF thread, which can be changed
to G 1/4, using an LAPN 1/4 UNF adapter.
Table 1
Lubricating greases
Technical specification Grease fills in

standard Y-bearings, YAR 2-2RF/HV and YHB 2-2LS8W/VT357 and
standard Y-bearing units YAR 2-2RF/VE495 series YHC 2-2LS8W/VT357 series
Y-bearings, Y-bearing Y-bearings
units for the food industry
Thickener Lithium-calcium soap Aluminium-complex soap Lithium-complex soap
Base oil Mineral oil Synthetic hydrocarbon oil Mineral oil
Colour Yellowish brown White Amber
Temperature range [°C] –30 to +1201) –45 to +1502) –20 to +1403)

(continuous operation)
Kinematic viscosity [mm2/s] 190/15 100/14,4 110/13

of base oil at 40 °C/100 °C
Consistency 2 2 3
(to NLGI scale)
Other Long life grease Fulfils the requirements –

of the Guidelines of section
21 CFR 178.3570 of the
FDA (US Food and Drug
Administration) regulations
1) The temperature range for reliable operation in accordance with the SKF traffic light concept is between 10 and 120 °C.
2)
The temperature range for reliable operation in accordance with the SKF traffic light concept is between 20 and 150 °C.
3)
The temperature range for reliable operation in accordance with the SKF traffic light concept is between 50 and 140 °C.
49
Lubrication and maintenance
Relubrication intervals
The relubrication interval tf can be estimated
from diagram 1 as a function of the rotational
speed n (r/min), the bearing mean diameter
dm († table 2) and the operating temperature
(°C).
The recommended intervals correspond to a
time when 90% of the bearings are still reliably
lubricated, and represent L10 grease life. When
the L10 grease life is equivalent to or higher than
the rating life of the Y-bearing, the bearing is
considered to be lubricated for life and relubri- Table 2
cation is not required. Bearing mean diameter dm

The intervals obtained from diagram 1 are
valid for Y-bearings and Y-bearing units filled
with the standard high quality long lasting
mineral oil based grease, as well as for food-
grade grease:
dm dm
• on horizontal shafts
• in stationary machines
• P ≤ 0,05 C
If operating conditions differ, reduce the relu-

brication intervals obtained from diagram 1 as
follows:
Bearing size1) Bearing mean diameter
dm
• on vertical shafts by 50%
– mm
• at heavier loads, e.g. at P > 0,10 C,
by roughly 50% 03 28,5
04 33,5
In severe, very dirty or damp environments, 05 39
more frequent relubrication might be necessary. 06 46
When the operating temperatures are constantly 07 53,5
08 60
below 40 °C, the grease life is shortened
because oil separation is reduced. 09 65
10 70
Vibration can have a negative influence on 11 77,5
grease life too. The extent cannot be quantified
12 85
exactly, but it can be noticeable if the normal 13 92,5
operating temperature increases. 14 97,5
The values for reducing the relubrication 15 102,5
intervals are estimates. If in doubt, contact the 16 110
17 117,5
SKF application engineering service.
In cases where machines and equipment are 18 126
20 141
used for a limited period of time, SKF recom-
mends relubricating each bearing at the end of
the operational period, i.e. immediately before
being laid up.
1) For example: bearing size 06 includes all bearings based
on a Y 206 bearing, such as YAR 206-101-2F,
YAR 206-102-2F, YAR 206-2F, YAR 206-103-2F,
YAR 206 104¬ 2F
50
1
Diagram 1
Relubrication interval tf, h
100 000
90 000 100 000
n dm = 50 000
80 000
70 000
150 000
60 000
50 000 200 000
40 000
n dm = 250 000
30 000
20 000
10 000
0
0 40 45 50 55 60 65 70 75 80 85 90 95 100
Operating temperature, °C
51
Mounting instructions
Mounting instructions Fig. 1
– general
To provide proper bearing performance and
prevent premature failure, skill and cleanliness
when mounting Y-bearings or Y-bearing units
are necessary. As precision components, they
should be handled carefully when mounting.
It is also important to choose the appropriate
method of mounting and to use the correct tools.
The method used for mounting a Y-bearing
unit depends on:
Tools
• the overall machine design To mount or dismount Y-bearing units,
• the Y-bearing housing design the following tools are required:
• the method used to attach the unit to the shaft
• a hexagonal key (hex wrench) to tighten or
NOTE: Failure to carefully follow applicable loosen grub (set) screws († table 1, page 54)
mounting instructions can result in premature • a hook spanner to tighten or loosen the lock
bearing failure or improper performance. For nut on an adapter sleeve († table 2,
further information, contact the SKF application page 55)
engineering service. • a hook spanner with a stud to tighten or
Detailed mounting instructions can be found loosen the eccentric locking collar
on the following pages. • a spanner or hexagonal key to tighten
Y-bearings, Y-housings or Y-bearing units or loosen the fasteners
should not be removed from their original pack-
aging until immediately before they are mounted. The hook spanners are part of the comprehensive
Before installing a Y-bearing unit, check that SKF range of maintenance products. Detailed
the shaft is clean and free of any burrs and that information can be found in the printed catalogue
the shaft seat is within tolerance. Also be sure SKF Maintenance and Lubrication Products or
that the support surfaces are clean and free online at www.skf.com.
of burrs and that the flatness is within the IT7
tolerance grade and that the roughness
Ra ` 12,5 mm. Attaching Y-bearing units
to the support base
To reduce vibration and enable heat to dissipate
from the unit, the housing must be firmly
attached to the support base. To attach Y-bearing
units to the support surface, SKF recommends
using 8.8 class bolts or studs and a washer to
ISO 7089:2000 or 7090:2000 and a spring
52
Fig. 2
w asher. Hexagonal head bolts in accordance
with ISO 4014:1999 are appropriate. Alterna-
tively, hexagonal socket head cap screws in 1
accordance with ISO 4762:1988 can be used
(† fig. 1).
Assembling units
In cases where the Y-bearing and composite
or cast Y-housing are not supplied as a unit, the
first step is to assemble the bearing into the
housing. To do this, start by removing the locking
collar if the bearing has one. Then insert the
bearing into the filling slot in the housing bore
(† fig. 2) and with a round piece of wood or
pipe, swivel the bearing into position so that the
locking device is facing in the same direction as
the filling slots († fig. 3). When installing
standard bearings, make sure that the relubri- Fig. 3
cation hole in the bearing on the side of the

locking device does not coincide with the filling
slot in the housing, otherwise grease leakage
may result († fig. 4).
Fig. 4
53
Table 1
Hexagonal keys to tighten grub screws in inner rings or eccentric locking collars – sizes and tightening torques
SW
SW
Bearing Bearing or unit Bearing or unit Bearing Bearing or unit Bearing or unit
size1) with metric bore with inch bore size1) with metric bore with inch bore
Hexagonal Tightening Hexagonal Tightening Hexagonal Tightening Hexagonal Tightening
key size torque key size torque key size torque key size torque
SW SW SW SW
– mm Nm inch Nm – mm Nm inch Nm
Bearings in the YAR series, unit with designation Bearings in the YAT series,
suffix TF, TR units with designation suffix RM
03 3 4 3/32 4 03 3 4 3/32 4
04 3 4 1/8 4 04 3 4 1/8 4
05 3 4 1/8 4 05 3 4 1/8 4
06 3 4 1/8 4 06 3 4 5/32 6,5

07 3 4 5/32 6,5 07 3 4 5/32 6,5
08 4 6,5 5/32 6,5 08 3 4 5/32 6,5
09 4 6,5 5/32 6,5 09 3 4 5/32 6,5

10 5 16,5 3/16 16,5 10 4 6,5 5/32 6,5
11 5 16,5 3/16 16,5 11 – – 3/16 16,5
12 5 16,5 3/16 16,5 12 – – 3/16 16,5

13 5 16,5 3/16 16,5 15 – – 3/16 16,5
14 5 16,5 7/32 28,5 16 – – 3/16 16,5
15 5 16,5 7/32 28,5 Bearings in the YET or YEL series,

16 5 16,5 7/32 28,5 units with designation suffix FM or WF
17 6 28,5 – –
03 3 4 1/8 4
18 6 28,5 – – 04 3 4 1/8 4
20 6 28,5 – – 05 3 4 1/8 4
06 4 6,5 5/32 6,5

07 5 16,5 3/16 16,5
08 5 16,5 3/16 16,5
09 5 16,5 3/16 16,5

10 5 16,5 3/16 16,5
11 5 16,5 7/32 28,5
12 5 16,5 7/32 28,5
1)
YAR 206-2F, YAR 206-103-2F, YAR 206-104-2F
54
Table 2
Hook spanner size and tightening torque for Y-bearings and Y-bearing units on an adapter sleeve
1
Designation Shaft diameter Hook Tightening

Y-bearing + adapter sleeve spanner torque
d min max
– mm in – Nm
Bearings in the YSA series

Units with designation suffix KF
YSA 205-2FK + HE 2305 – 3/ 4 HN 5 13 17

YSA 205-2FK + H 2305 20 – HN 5 13 17
YSA 206-2FK + HA 2306 – 15/16 HN 6 22 28

YSA 206-2FK + H 2306 25 – HN 6 22 28
YSA 206-2FK + HE 2306 – 1 HN 6 22 28
YSA 207-2FK + H 2307 30 – HN 7 27 33

YSA 207-2FK + HA 2307 – 1 3/16 HN 7 27 33
YSA 208-2FK + HE 2308 – 1 1/4 HN 8 35 45

YSA 208-2FK + H 2308 35 – HN 8 35 45
YSA 209-2FK + HA 2309 – 1 7/16 HN 9 45 55

YSA 209-2FK + HE 2309 – 1 1/2 HN 9 45 55
YSA 209-2FK + H 2309 40 – HN 9 45 55
YSA 210-2FK + HS 2310 – 1 5/8 HN 10 55 65

YSA 210-2FK + HA 2310 – 1 11/16 HN 10 55 65
YSA 210-2FK + HE 2310 – 1 3/4 HN 10 55 65
YSA 210-2FK + H 2310 45 – HN 10 55 65
YSA 211-2FK + HA 2311 B – 1 15/16 HN 11 65 85

YSA 211-2FK + H 2311 50 – HN 11 65 85
YSA 211-2FK + HE 2311 – 2 HN 11 65 85
YSA 212-2FK + HS 2312 – 2 1/8 HN 12 85 115

YSA 212-2FK + H 2312 55 – HN 12 85 115
YSA 213-2FK + HA 2313 – 2 3/16 HN 13 110 150

YSA 213-2FK + HE 2313 – 2 1/4 HN 13 110 150
YSA 213-2FK + H 2313 60 – HN 13 110 150
YSA 213-2FK + HS 2313 – 2 3/8 HN 13 110 150
55
for Y-bearing plummer

block units
with a composite or cast housing and grub
screws
1 Mount any components that are on the

shaft between the two Y-bearing units.
2 Slide the Y-bearing plummer (pillow) block
unit onto the shaft with its locking device
facing outwards.
3 Position the Y-bearing unit on the support
surface. Fit the attachment bolts or nuts
but do not tighten them.
4 Mount the other Y-bearing plummer block
unit on the other end of the shaft, following
steps 2 and 3.
5 Carefully align both Y-bearing units, using
the shaft. Fully tighten the attachment bolts
or nuts in the housing base.
6 Align the shaft in the bearing arrangement
axially and – if possible – turn it a few times.
7 Tighten the grub screws in the inner rings
of both units to the tightening torque indi-
cated in table 1 on page 54 († fig. 1).
8 If applicable, snap the end cover(s) into
place.
56
for Y-bearing plummer 1

block units
with a cast housing and an eccentric locking
collar

2 With the eccentric locking collar removed,
slide the Y-bearing plummer block unit onto
the shaft with the locking device facing
outwards.
3 Position the Y-bearing unit on the support
surface. Fit the attachment bolts or nuts but
do not tighten them.
unit on the other end of the shaft, following Fig. 2
steps 2 and 3.
the shaft. Fully tighten the attachment bolts
or nuts in the housing base.
7 Place the eccentric locking collars on the
inner ring extension of both Y-bearing units
and snug tighten them in the main direction
of rotation († fig. 1).
8 Tighten the locking collars to their final
position, using a hook spanner with a stud
engaging the hole in the circumference of
the collar († fig. 2).
9 Tighten the grub screw in the eccentric
locking collar of both Y-bearing units
(† fig. 3) to the tightening torque indicated
in table 1 on page 54. Fig. 3

place.
57
block units
with a cast housing and an adapter sleeve

2 Determine the position of the adapter
sleeve on the shaft († fig. 1).
3 Remove the nut and the locking washer
from the adapter sleeve († fig. 2).
4 Wipe the preservative from the bore and
outside surface of the sleeve.
5 Expand the adapter sleeve slightly by
inserting a screwdriver in the slot of the
sleeve and slide the adapter sleeve into
position on the shaft († fig. 3).
6 Slide the Y-bearing plummer block unit up
onto the adapter sleeve with the large end of
the tapered bore leading, but do not push it.
7 Install the locking washer and screw the
lock nut onto the adapter sleeve until the
Y-bearing unit is firmly in position on the
sleeve.
8 Further tighten the lock nut using one
of the following:
– a hook spanner in the HN series to a
tightening angle of about 70° († fig. 4)
– a TMHN lock nut spanner to a tightening
angle of about 70°
– a torque wrench to the tightening torque
indicated in table 2 on page 55
Make sure that while tightening the nut, the
sleeve does not rotate on the shaft.
9 Lock the nut in position by bending down a
tab on the locking washer in one of the slots
provided around the circumference of the
nut († fig. 5).
unit on the other end of the shaft, following
steps 2 through 9.
11 Position the Y-bearing units on their support
surfaces. Fit the attachment bolts or nuts
the shaft and, if possible, turn it a few times.
Then tighten the attachment bolts or nuts.
place.
58
Fig. 1 Fig. 2
Fig. 3 Fig. 4
Fig. 5
5 9
block units
with a pressed steel housing and grub
screws

2 Slide the Y-bearings with the locking device
facing outward onto the shaft – at both
ends. Install the rubber seating ring on the
outside diameter of the bearing (optional).
3 Place the base of each housing on its sup-
port surface.
4 Place the shaft and Y-bearings into position
in each housing base. Then, place the hous-
ing caps over the bearings († fig. 1) and
install the attachment bolts or nuts.
the shaft. Then, tighten the attachment
bolts or nuts.
7 Tighten the grub screws in the inner ring of
both bearings († fig. 2) to the tightening
torque indicated in table 1 on page 54.
60
Fig. 1
Fig. 2
61
block units
with a pressed steel housing and
an eccentric locking collar

slide the Y-bearings onto both shaft ends
with the locking device facing outwards.
Install the rubber seating ring on the out-
side diameter of the bearing (optional).
3 Place the base of each housing on its sup-
port surface.
4 Place the shaft and Y-bearings into position
in each housing base. Then, place the housing
caps over the bearings († fig. 1) and
install the attachment bolts or nuts.
the shaft. Then, tighten the attachment
bolts or nuts.
inner ring extension of both Y-bearings and
snug tighten them in the main direction of
rotation († fig. 2).
position, using a hook spanner with a stud
locking collar of both Y-bearings († fig. 4)
to the tightening torque indicated in table 1
on page 54.
62
Fig. 1 Fig. 2
Fig. 3 Fig. 4
6 3
for flanged Y-bearing units

with a composite (Y-TECH) or cast housing
and grub screws

2 Slide the flanged Y-bearing unit onto the
shaft.
3 Fasten the Y-bearing unit securely to the
machine wall.
4 Mount the other flanged Y-bearing unit
to the opposite end of the shaft, following
steps 2 and 3.
6 Tighten the grub screws on the inner ring
of both units († fig. 1) to the tightening
torque indicated in table 1 on page 54.
place.
64
for flanged Y-bearing units 1

with a composite (Y-TECH) or cast housing
and an eccentric locking collar

slide the flanged Y-bearing unit onto the
shaft with the locking device facing
outwards.
machine wall.
4 Mount the other flanged Y-bearing unit
to the opposite end of the shaft, following
steps 2 and 3.
5 Align the shaft in the bearing arrangement Fig. 2

inner ring of both Y-bearings and snug
tighten them in the main direction of rotation
(† fig. 1).
position using a hook spanner with a stud
locking collar of both units († fig. 3) to the
tightening torque indicated in table 1 on
page 54.
place.
Fig. 3
65
Mounting instructions 12 Make sure the shaft turns smoothly and the
bearings are not jammed in place. If neces-
for flanged Y-bearing units sary, remove the last Y-bearing unit to be
mounted, determine a new installation
with a cast housing and an adapter sleeve position for the adapter sleeve on the shaft
and mount the Y-bearing unit again.
1 Mount any components that are on the 13 If the shaft turns smoothly, secure the
shaft between the two Y-bearing units. Y-bearing unit on the adapter sleeve by
2 Determine the position of the adapter bending down a tab on the locking washer
sleeve on the shaft († fig. 1). Take into into one of the slots provided around the
consideration that later during mounting circumference of the nut († fig. 5).
– the Y-bearing unit will move axially on 14 If applicable, snap the end cover(s) into
the sleeve or vice versa place.
– the shaft will move axially against the
Y-bearing unit.
This is particularly important when mount-
ing the second Y-bearing unit.
3 Remove the nut and locking washer from
the adapter sleeve († fig. 2).
4 Wipe the preservative from the bore and
outside surface.
5 Expand the adapter sleeve slightly by
inserting a screwdriver in the slot of the
sleeve and slide the adapter sleeve into
position on the shaft († fig. 3).
6 Slide the Y-bearing unit up onto the adapter
sleeve with the large end of the tapered
bore leading, but do not push it.
machine wall.
8 Install the locking washer and screw the
lock nut onto the adapter sleeve until the
Y-bearing unit is firmly in position on the
sleeve.
9 Further tighten the lock nut using one
of the following:
– a hook spanner in the HN series to
a tightening angle of about 70°
(† fig. 4)
– a TMHN lock nut spanner to a tightening
angle of about 70°
– a torque wrench to the tightening torque
indicated in table 2 on page 55
Make sure that while tightening the nut, the
sleeve does not rotate on the shaft.
10 Lock the nut in position by bending down
a tab on the locking washer into one of the
slots provided around the circumference
of the nut († fig. 5).
11 Mount the second Y-bearing unit at the
other end of the shaft, following steps 2
through 9.
66
Fig. 1 Fig. 2
Fig. 3 Fig. 4
Fig. 5
67
with a pressed steel housing and grub
screws

2 Place one housing half into position on
the machine wall with threaded fasteners
(† fig. 1).
3 With the locking device facing outward, slide
the Y-bearing onto the shaft and into the
housing half.
4 Place the second housing half into position
over the Y-bearing († fig. 2).
5 Fit the threaded fasteners (nuts or bolts),
6 Mount the Y-bearing unit at the other end
of the shaft, following steps 2 through 5.
7 Tighten the threaded fasteners holding the
flanged units in place.
9 Tighten the grub screws on both units
(† fig. 3) to the tightening torque indicated
in table 1 on page 54.
68
Fig. 1
Fig. 2
Fig. 3
69
with a pressed steel housing and
an eccentric locking collar

2 Place one housing half into position on
the machine wall with threaded fasteners
(† fig. 1).
slide the Y-bearing onto the shaft and into
the housing half with the locking device
facing outwards.
4 Place the second housing half into position
over the Y-bearing († fig. 2).
5 Fit the threaded fasteners (nuts or bolts),
6 Mount the other Y-bearing unit at the other
end of the shaft, following steps 2 through 5.
7 Tighten the threaded fasteners holding the
flanged units in place.
inner ring extension of both Y-bearings and
snug tighten them in the main direction of
rotation († fig. 3).
locking collar of both units († fig. 5) to the
page 54.
70
Fig. 1 Fig. 2
Fig. 3 Fig. 4
Fig. 5
71
for Y-bearing take-up units
with a cast housing and grub screws

2 Slide the Y-bearing take-up units onto both
shaft ends with the locking device facing
outward.
3 Install the shaft and Y-bearing take-up
units into the take-up frames and connect
the adjustment screws via the cast hole in
the units.
5 Tighten the grub screws on both Y-bearing
take-up units to the tightening torque indi-
cated in table 1 on page 54.
place.
72
for Y-bearing take-up units 1
with a cast housing and an eccentric locking
collar

slide the Y-bearing take-up units onto both
shaft ends with the locking device facing
outwards.
3 Install the shaft with the Y-bearing take-up
units into the take-up frames and connect
the adjustment screws via the cast hole in
the units.
inner ring extension of both Y-bearing units
and snug tighten them in the main direction
of rotation.
the collar.
locking collar of both Y-bearing units to the
page 54.
place.
73
Storing Y-bearings
and Y-bearing units
Y-bearings and Y-bearing units are normally Y-bearings and Y-bearing units, which are
treated with a rust preventive compound and no longer in their original packages, must be
can be stored in their original unopened package adequately protected against corrosion and
for a number of years. However, they should be contamination and should also be identified in
kept in a vibration-free, dry environment where some way by their complete designation.
the relative humidity does not exceed 60% and
the temperature is reasonably constant.
When Y-bearings and Y-bearing units are
stored for long periods, they may have a higher
initial starting torque than Y-bearings or units
recently delivered from the factory. Also, the
lubricating properties of the grease may have
deteriorated after long periods of storage.
74
Designation systems 1
The complete designation for a Y-bearing or More details about the basic designations
a Y-bearing unit consists of: and the supplementary designations can
be obtained from the designation charts:
• prefixes, identifying the Y-bearing or
Y-bearing unit series • Y-bearing designation system
• figures, identifying the size († table 1, page 76)
• suffixes, identifying designs and variants • Y-bearing unit designation system
(† table 2, page 77)
75
Designation systems
Table 1
Y-bearing designation system
Examples YAR 208-2RF/HV YAR 2 08 2RF/HV

YEL 203/15-2FW YEL 2 03/15 2FW
Bearing series
YAR Inner ring extended on both sides, with grub screws

YAT Inner ring extended on one side, with grub screws
YEL Inner ring extended on both sides, with an eccentric locking collar
YET Inner ring extended on one side, with an eccentric locking collar
YHB Inner ring extended on both sides, hexagonal bore
YHC Inner ring extended on both sides, hexagonal bore
YQC Inner ring extended on both sides, square bore
YSA Inner ring symmetrically extended on both sides
Dimension series
2 Bearing to ISO 9628:2006

17262 Bearing to ISO 15:1998, Dimension Series 02,
sphered outside diameter
17263 Bearing to ISO 15:1998, Dimension Series 03,
sphered outside diameter
Bore diameter
Bearings for metric shafts

03/12 12 mm bore diameter
03/15 15 mm bore diameter
03 17 mm bore diameter
to
Bearings for inch shafts

Three-figure combination that follows the designation of the basic metric bearing
and is separated from this by a hyphen; the first figure is the number of whole
inches and the second and third figures are the number of sixteenths of an inch,
e.g. 204-012
-012 3/4 in. = 19,050 mm bore diameter
-100 1 in. = 25,400 mm bore diameter
to
-208 2 1/2 in. = 63,500 mm bore diameter
Suffixes
Seals
– Contact standard integral seal on both sides of the bearing
2F Contact standard integral seal with an additional plain flinger on both sides of the bearing
2LS8 Contact seal of synthetic rubber with sheet steel reinforcement on both sides of the bearing
2RF Contact standard integral seal with an additional rubberized flinger on both sides of the bearing
2RS1 Contact seal of synthetic rubber with sheet steel reinforcement on both sides of the bearing
VP076 Pressed sheet steel shield on both sides of the bearing
Material
HV Bearing components of stainless steel and food-grade grease
VE495 Zinc-coated inner and outer ring and stainless steel flingers, food-grade grease
VL065 Zinc-coated inner ring bore and side faces
Other features
AH Bearing for air-handling applications
C Cylindrical outside diameter
G Lubrication groove in the outside diameter, located at the side opposite the locking device
GR Lubrication groove in the outside diameter, located at the side of the locking device
K Tapered bore, taper 1:12
U Bearing without an eccentric locking collar
VT357 Bearing filled with a special grease
W Bearing without lubrication hole(s)
W64 Solid Oil fill
76
Table 2
Y-bearing unit designation system
Examples FYTBK 30 TR FY TB K 30 TR
1
SY 1.1/2 TF SY 1.1/2 TF
TUJ 50 TF TUJ 50 TF
PFD 40 PF D 40
Identification of housing type
J stands for dimensions to standard JIS 1559-1995

FY(J) Flanged housing
P Plummer block housing, pressed steel
PF Flanged housing, pressed steel
SY(J) Plummer block housing
TU(J) Take-up housing
Identification of unit design
– Base version; when flanged: square flange

C Flanged unit, round flange
D Flanged unit, triangular flange
F Plummer block unit, short base
H Plummer block unit, lower centre height
M Plummer block unit, higher load carrying capacity
T Flanged unit, oval flange
TB Flanged unit, oval flange
TF Flanged unit, oval flange, no relubrication facility
Identification of housing material
– Grey cast iron

K Composite
Z Grey cast iron zinc coated
R Stainless steel
Identification of size
Bearing units for metric shafts: in millimetres uncoded

to
Bearing units for inch shafts: in inches uncoded
3/4 3/4 in. = 19,05 mm bore diameter
to
2 1/2 2 1/2 in. = 63,5 mm bore diameter
Housings from grey cast iron or composite material
503 for Y-bearings of sizes 203, 203/12 and 203/15
to
520 for Y-bearings of size 220
Housings from sheet steel (not supplied as bearing unit)
40 40 mm housing bore diameter
to
90 90 mm housing bore diameter
Identification of inserted Y-bearing
FM Y-bearing with an eccentric locking collar, YET 2 series

KF Y-bearing with a tapered bore, YSA 2-2FK series
LF Y-bearing with SKF ConCentra locking
RM Y-bearing with grub screws, YAT 2 series
TF Y-bearing with grub screws, YAR 2-2F series
TR Y-bearing with grub screws, YAR 2-2RF series
WF Y-bearing with an eccentric locking collar, YEL 2-2F series
Other features
See table 1 “Y-bearing designation system”
77
78
Y-bearings
2
Designs ................................................................................................................. 80
Special designs.............................................................................................................................. 81
Y-bearings with grub screws ................................................................................... 82

Bearings made of rolling bearing steel ........................................................................................ 82
Bearings with zinc-coated rings ................................................................................................... 83
Stainless steel bearings ................................................................................................................ 83
Y-bearings with an eccentric locking collar ............................................................... 84
Y-bearings with a tapered bore ............................................................................... 85
Y-bearings with a standard inner ring...................................................................... 85
Y-bearings with a hexagonal or square bore ............................................................. 86
Seals ..................................................................................................................... 87
Standard seals ............................................................................................................................... 87
Standard seals with an additional flinger ..................................................................................... 87
Multiple seals ................................................................................................................................. 87
RS1 seals ....................................................................................................................................... 88
LS8 seals........................................................................................................................................ 88
Shields ........................................................................................................................................... 88
Permissible operating temperatures for seals ............................................................................. 88
Data – general ....................................................................................................... 89

Dimensions .................................................................................................................................... 89
Tolerances ...................................................................................................................................... 89
Radial internal clearance............................................................................................................... 90
Cages.............................................................................................................................................. 91
Grease fills ..................................................................................................................................... 91
Mounting ....................................................................................................................................... 91
Product tables ....................................................................................................... 92

2.1 Y-bearings with grub screws,
metric shafts ......................................................................................................................... 92
inch shafts ............................................................................................................................. 94
2.2 Y-bearings with an eccentric locking collar,
metric shafts ......................................................................................................................... 98
inch shafts ............................................................................................................................. 100
2.3 Y-bearings with a tapered bore on an adapter sleeve,
metric shafts ......................................................................................................................... 102
inch shafts ............................................................................................................................. 104
2.4 Y-bearings with a standard inner ring, metric shafts ......................................................... 106
79
Y-bearings
Designs Fig. 1
SKF Y-bearings, which are usually referred to as

insert bearings, are basically sealed deep groove
ball bearings in the 62 and 63 series, with a
convex outer ring. These bearings are manufac-
tured in a number of different series and sizes
and are available with a standard inner ring or
an inner ring that is extended on one or both
sides († fig. 1).
The various insert bearing series differ in the
way the bearing is located onto the shaft. The
most common methods use any one of the
following:
• grub (set) screws († fig. 2)

• eccentric locking collar († fig. 3)
• adapter sleeve († fig. 4)
• interference fit († fig. 5) Fig. 2
• SKF ConCentra locking († fig. 6)
The standard SKF assortment includes Y-bearings

made of rolling bearing steel as well as stainless
steel and Y-bearings with zinc-coated
components.
Fig. 3
80
Fig. 4
Fig. 5
Fig. 6
81
Y-bearings
Y-bearings with grub screws Fig. 7
Y-bearings with grub screws in the inner ring

are locked in position on the shaft by tightening
the two cup point hexagonal grub screws, pos-
itioned 120° apart. These bearings are suitable
for applications where the direction of rotation is
constant or alternating. Two different standard
designs are available.
Y-bearings in the YAT 2 series have an
extended inner ring on one side, and are sealed
with the rugged standard integral seal
(† fig. 7). The outer ring has two lubrication
holes as standard.
Y-bearings in the YAR 2 series have an
extended inner ring on both sides († fig. 8).
This reduces the extent to which the inner ring
can tilt on the shaft, which enables the bearing
to run more smoothly. These bearings are fitted Fig. 8
with the rugged standard integral seal and one

of the following flinger options:
• plain sheet steel flingers, designation suffix 2F

• rubberized sheet steel flingers (multiple seal),
designation suffix 2RF
The outer ring has two lubrication holes as

standard.
Bearings without lubrication holes can be
supplied on request. They are identified by the
suffix W.
Bearings made of rolling bearing steel

Y-bearings in the YAT 2 and YAR 2 standard
series are manufactured from high-grade car-
bon chromium steel. The SKF range comprises
bearings for metric shafts from 12 to 100 mm
and inch shafts from 1/2 to 3 inch († product
table on pages 92 to 97).
82
Bearings with zinc-coated rings
Y-bearings with an extended inner ring on both
sides (YAR 2 series) are also available with zinc-
coated rings for use in corrosive environments.
These bearings, series designation
YAR 2-2RF/VE495:
• use highly efficient multiple seals made of

food-compatible rubber and stainless steel 2
flingers
• are fitted with grub screws made of stainless
steel
• are filled with a food-grade grease
• can be relubricated through the lubrication
holes in the outer ring
The SKF range of Y-bearings with zinc-coated

rings covers bearings for metric shafts from
20 to 50 mm († product table on page 92).
Stainless steel bearings

All steel components of stainless steel Y-bearings
are made of stainless steel. This includes the
rings, balls, sheet metal parts of the seal and
the grub screws. The inner ring is extended on
both sides. These bearings, series designation
YAR 2-2RF/HV:
• use highly efficient multiple seals made of

food-compatible rubber
• are filled with a food-grade grease
• can be relubricated through one lubrication
hole in the outer ring
The SKF range covers bearings for metric shafts

from 20 to 50 mm as well as inch shafts from
3/4 to 1 15/16 inch († product table on page 92
to 96).
The dynamic load carrying capacity of a stain-
less steel bearing is less than that of a similarly
sized standard steel bearing.
83
Y-bearings
Y-bearings with an eccentric Fig. 9
locking collar
Y-bearings with an eccentric locking collar are
intended primarily for use in applications where
the direction of rotation is constant. On one
side of the bearing inner ring is an eccentric
extension that fits the locking collar. Turning the
locking collar on the inner ring extension in the
direction of rotation locks the collar and bearing
on the shaft. A single grub screw further secures
the collar to the shaft. There are two standard
series available from SKF.
Y-bearings in the YET 2 series have an extend-
ed inner ring on one side and are fitted with the
rugged standard integral seal († fig. 9). The
eccentric collar is coated (zinc-coated for bearings
with a metric bore, black oxidized for bearings
with an inch bore). The outer ring has two lubri- Fig. 10
cation holes as standard.

Y-bearings in the YEL 2 series have an
extended inner ring on both sides († fig. 10).
This reduces the extent to which the inner ring
can tilt on the shaft, which enables the bearing
to run more smoothly. These bearings are fitted
with the rugged standard integral seal and one
of the following flinger options:
• plain sheet steel flingers, designation suffix 2F

• rubberized sheet steel flingers (multiple seal),
designation suffix 2RF/VL065
The outer ring has two lubrication holes as

standard.
Bearings without lubrication holes can be
supplied on request. They are identified by the
suffix W.
The SKF range comprises bearings for metric
shafts from 15 to 60 mm and inch shafts from
1/2 to 2 7/16 inch († product table on pages 98
to 101).
84
Fig. 11
Y-bearings with a tapered
bore
Y-bearings in the YSA 2-2FK series († fig. 11)
have a symmetrically extended inner ring on
both sides and a tapered bore (taper 1:12) ena-
bling them to be mounted on a standard adapter
sleeve in the H 23 series. The appropriate adapt-
er sleeve is not part of the bearing and must be 2
ordered separately.
Y-bearings with a tapered bore are equipped
with the rugged standard integral seal, fitted
with additional plain sheet steel flingers. The
outer ring has two lubrication holes as standard.
Mounting onto an adapter sleeve enables the
bearings to operate at higher speeds and run
more smoothly in applications where the direction
of rotation is constant or alternating.
Fig. 12 The SKF range, which comprises bearings
with bore diameters ranging from 25 to 65 mm,
fits adapter sleeves in the H 23 series for metric
shafts ranging from 20 to 60 mm († product
table on page 102). These bearings can also be
used on adapter sleeves in the HA 23, HE 23
and HS 23 series for inch shafts ranging from
3/4 to 2 3/8 inch († product table on page 104).
Y-bearings with a standard

inner ring
Y-bearings in the 17262(00)-2RS1 and
17263(00)-2RS1 series († fig. 12) with a
standard inner ring have normal tolerances for
the bearing bore diameter and are located on the
shaft using an appropriate interference fit. They
do not have any lubrication holes in the outer ring.
The only difference between these Y-bearings and
deep groove ball bearings in the 62 and 63 series
is the sphered outside surface of the outer ring.
These Y-bearings are suitable for applications
where the direction of the load alternates and
where smooth running is a key operational
parameter. These bearings can accommodate
heavier axial loads than Y-bearings of any other
design. They can also operate at the same speeds
as the corresponding sealed deep groove ball
bearings.
The SKF range comprises bearings for metric
shafts from 17 to 60 mm († product table on
page 106).
85
Y-bearings with a hexagonal Fig. 13
or square bore
Y-bearings with a hexagonal or square bore are
intended primarily for high torque applications.
The bore is produced to a plus tolerance and
enables easy mounting and dismounting. These
bearings should be axially located on the shaft
using adjacent components.
The bearings have a standard outer ring
without lubrication holes (designation suffix W).
Bearings in the YHB 2 and YHC 2 series
have a hexagonal bore († fig. 13). They are
equipped with rugged contact seals (designation
suffix LS8).
For more information, contact the SKF applica-
tion engineering service.
86
Fig. 14
Seals
Since Y-bearings were originally developed for
use in agricultural applications, sealing has
always been very important. Therefore, SKF
Y-bearings are available with different sealing
configurations to suit the operating conditions.
2
Standard seals
The standard seal for SKF Y-bearings is the
rugged integral seal. It consists of a pressed
sheet steel washer with a sealing lip made of
acrylonitrile-butadiene rubber (NBR) vulcanized
to its inner surface († fig. 14). The non-contact
sheet steel washer forms a narrow gap with the
cylindrical surface of the inner ring shoulder and
protects the land-riding seal against coarse
Fig. 15 contaminants.
Standard seals with an additional flinger

For more contaminated environments, a
Y-bearing with an inner ring extended on both
sides should be used. These bearings are
equipped with seals that have an additional
plain, sheet steel flinger on the outboard side
of the integral standard seal († fig. 15) and
are identified by the designation suffix 2F. The
flingers are made of sheet steel or stainless
sheet steel respectively, have an interference fit
on the inner ring and considerably enhance the
seals’ effectiveness without increasing friction.
Multiple seals
Fig. 16
For Y-bearing arrangements requiring a high
degree of reliability, even in extremely contam-
inated environments, a bearing with an inner
ring extended on both sides should be used with
the highly efficient multiple seal arrangement.
In this sealing arrangement († fig. 16), a
flinger with a vulcanized rubber lip is fitted outside
the standard integral seal. This acrylonitrile-
butadiene rubber lip seals axially against the
integral seal. The space between the integral
seal and the rubberized flinger is filled with
grease to provide additional protection.
87
Y-bearings
RS1 seals Fig. 17
Y-bearings with a standard inner ring, 17262(00)-

2RS1 and 17263(00)-2RS1 series, are equipped
with the RS1 contact seal developed for stand-
ard SKF deep groove ball bearings († fig. 17).
These seals, which are made from oil and wear
resistant acrylonitrile-butadiene rubber (NBR),
are reinforced with a pressed sheet steel insert
and seal against the cylindrical surface of the
inner ring shoulder.
LS8 seals
Y-bearings with a hexagonal bore, series YHB 2
and YHC 2, are equipped with LS8 contact seals
(† fig. 18). These seals, which are made from
acrylonitrile-butadiene rubber (NBR), are rein-
forced with a pressed sheet steel insert and seal
against the cylindrical surface of the inner ring Fig. 18
shoulder.
Shields
Y-bearings are also available with shields
(† fig. 19), which are identified by the desig-
nation suffix VP076.
Pressed steel shields are used in temperature
or speed sensitive applications where additional
friction is not desirable. In applications where
shielded bearings are used, contamination
should not be severe and water, steam or mois-
ture should not be able to enter the bearing.
Permissible operating temperatures

for seals
Fig. 19
Contact seals can be used at operating tempera-
tures between –30 and +100 °C. Temperatures
up to 120 °C are also possible for brief periods,
but might have a negative effect on the service
life of the grease.
88
Data – general Tolerances
The bore and outside diameter of Y-bearings
Dimensions are produced to tolerances indicated in table 1.
• The boundary dimensions of Y-bearings in Symbols used are explained in the following.
the YAR 2, YET 2 and YEL 2 series are in The values specified for the tolerance zone of
accordance with ISO 9628:2006. the bore diameter of bearings in the YAT 2, YAR 2,
• The boundary dimensions of Y-bearings in YET 2 and YEL 2 series are slightly tighter than
the 17262(00)-2RS1 and 17263(00)-2RS1 Normal tolerances listed in ISO 9628:2006.
series are in accordance with those of deep The values specified for bearings in the 2
groove ball bearings in the 62 and 63 series 17262(00)-2RS1 and 17263(00)-2RS1 series
and are in accordance with ISO 15:1998, are in accordance with ISO 492:2002.
except that the bearings have a sphered SKF manufactures bearings in the YSA 2-2FK
outside diameter series with a tapered bore, taper 1:12. They
• The boundary dimensions of Y-bearings in are designed to fit adapter sleeves in the H 23
the YSA 2-2FK series are in accordance with series, for metric and inch shafts.
JIS 1558-1995 The hexagonal or square bore of bearings in
• Y-bearings in the YAT 2, YHB 2, YHC 2 and the YHB 2, YHC 2 and YQC 2 series is produced
YQC 2 series have not been standardized to a 0/+0,25 mm tolerance.
either nationally or internationally, but are
common in the marketplace. Symbols
d Nominal bore diameter
The dimensions of the adapter sleeves in the Ddmp Deviation of the mean bore diameter
H 23 series, which are normally used to locate from the nominal
YSA 2-2FK bearings onto the shaft, are in D Nominal outside diameter
accordance with ISO 2982-1:1995. DDmp Deviation of the mean outside diameter
from the nominal
Table 1
Tolerances for SKF Y-bearings
Nominal Inner ring Outer ring

diameter Bearings in the series All bearings
YAT 2, YAR 2, 17262(00)
YET 2, YEL 2 17263(00)
d, D Ddmp Ddmp DDmp
Over Incl. High Low High Low High Low
mm µm µm µm
10 18 +15 +5 0 –8 – –
18 31,75 +18 +5 0 –10 – –
31,75 50,8 +19 +5 0 –12 0 –10

50,8 80,962 +21 +5 0 –15 0 –10
80,962 120 +25 +5 – – 0 –15

120 150 – – – – 0 –15
150 180 – – – – 0 –20
89
Y-bearings
Radial internal clearance

Y-bearings are manufactured as standard with
the radial internal clearance indicated in table 2.
The values specified there for bearings in the:
• YAT, YAR, YET, YEL, YHB, YHC and YQC series

are in accordance with Group N radial internal
clearances as listed ISO 9628:2006
• YSA 2 K series are in accordance with
Group 3 radial internal clearances as listed in
ISO 9628:2006
• 17262(00)-2RS1 and 17263(00)-2RS1
series are manufactured with Normal radial
internal clearances for deep groove ball bear-
ings as standard. The values are in accordance
with ISO 5753:1991
Table 2
Radial internal clearance for Y-bearings
Bearing size1) Radial internal clearance of Y-bearings in the series

YAT 2, YAR 2, YSA 2 K 17262 (00)
YET 2, YEL 2 17263(00)
YHC 2
from to min max min max min max
– µm
03 03 10 25 – – 3 18
04 04 12 28 – – 5 20
05 06 12 28 23 41 5 20
07 08 13 33 28 46 6 20
09 10 14 36 30 51 6 23
11 13 18 43 38 61 8 28
14 16 20 51 – – – –
17 20 24 58 – – – –
1)
YAR 206-2F, YAR 206-103-2F, YAR 206-104-2F
90
Cages Fig. 20
All standard Y-bearings are fitted with an injection

moulded snap-type cage of glass fibre reinforced
polyamide 66 († fig. 20). These cages exhibit
excellent performance characteristics in a variety
of applications where operating temperatures
do not exceed 120 °C.
The lubricants generally used for Y-bearings
do not have any detrimental effect on cage 2
properties.
Grease fills
All standard design SKF Y-bearings and Y-bearings
with a square bore are filled with a high quality,
long lasting grease containing a lithium-calcium
thickener with a consistency of 2 on the NLGI
scale.
Y-bearings made of stainless steel, in the
YAR 2-2RF/HV series, and Y-bearings with zinc-
coated rings, in the YAR 2-2RF/VE495 series,
meet the demands of food-processing machinery
in a corrosive environment. They are filled with
a non-toxic, food-grade grease based on a
synthetic hydrocarbon oil using an aluminium-
complex soap as a thickener.
Y-bearings with a hexagonal bore are filled
with a premium quality, mineral oil based grease
using a lithium-complex soap (designation suffix
VT357). The grease, which has a consistency of
3 on the NGLI scale, has good water and corrosion
resistant properties and provides excellent
lubrication at high operating temperatures.
For additional information about lubrication
and different lubricants, refer to the section
Lubrication and maintenance, starting
on page 48.
Mounting
The mounting procedures for Y-bearings depend
on the method used to attach the unit to the
shaft. The procedures are described in detail in
the section Mounting instructions, starting on
page 52.
Y-bearings with a standard inner ring are
mounted on the shaft with an interference fit.
91
Y-bearings with grub screws, metric shafts
d 12 – 100 mm
r1
r2
B B
D d d1
s1 s1
YAT YAR-2F YAR-2RF
Dimensions Basic load ratings Fatigue Limiting Mass Designation

dynamic static load speed
limit with shaft
d D B C d1 s1 r1,2 C C0 Pu tolerance
min h6
mm kN kN r/min kg –
12 40 27,4 12 24,2 15,9 0,3 9,56 4,75 0,2 9 500 0,11 YAR 203/12-2F
15 40 27,4 12 24,2 15,9 0,3 9,56 4,75 0,2 9 500 0,10 YAR 203/15-2F
17 40 22,1 12 24,2 15,9 0,3 9,56 4,75 0,2 9 500 0,07 YAT 203
40 27,4 12 24,2 15,9 0,3 9,56 4,75 0,2 9 500 0,09 YAR 203-2F
20 47 25,5 14 28,2 18,3 0,6 12,7 6,55 0,28 8 500 0,11 YAT 204
47 31 14 28,2 18,3 0,6 12,7 6,55 0,28 8 500 0,14 YAR 204-2F
47 31 14 28,2 18,3 0,6 12,7 6,55 0,28 5 000 0,14 YAR 204-2RF
47 31 14 28,2 18,3 0,6 10,8 6,55 0,28 5 000 0,14 YAR 204-2RF/HV
47 31 14 28,2 18,3 0,6 12,7 6,55 0,28 5 000 0,14 YAR 204-2RF/VE495
25 52 27,2 15 33,7 19,5 0,6 14 7,8 0,335 7 000 0,14 YAT 205
52 34,1 15 33,7 19,8 0,6 14 7,8 0,335 7 000 0,17 YAR 205-2F
52 34,1 15 33,7 19,8 0,6 14 7,8 0,335 4 300 0,17 YAR 205-2RF
52 34,1 15 33,7 19,8 0,6 11,9 7,8 0,335 4 300 0,18 YAR 205-2RF/HV
52 34,1 15 33,7 19,8 0,6 14 7,8 0,335 4 300 0,18 YAR 205-2RF/VE495
30 62 30,2 18 39,7 21 0,6 19,5 11,2 0,475 6 300 0,23 YAT 206
62 38,1 18 39,7 22,2 0,6 19,5 11,2 0,475 6 300 0,28 YAR 206-2F
62 38,1 18 39,7 22,2 0,6 19,5 11,2 0,475 3 800 0,28 YAR 206-2RF
62 38,1 18 39,7 22,2 0,6 16,3 11,2 0,475 3 800 0,29 YAR 206-2RF/HV
62 38,1 18 39,7 22,2 0,6 19,5 11,2 0,475 3 800 0,29 YAR 206-2RF/VE495
35 72 33 19 46,1 23,3 1 25,5 15,3 0,655 5 300 0,31 YAT 207

72 42,9 19 46,1 25,4 1 25,5 15,3 0,655 5 300 0,41 YAR 207-2F
72 42,9 19 46,1 25,4 1 25,5 15,3 0,655 3 200 0,41 YAR 207-2RF
72 42,9 19 46,1 25,4 1 21,6 15,3 0,655 3 800 0,42 YAR 207-2RF/HV
72 42,9 19 46,1 25,4 1 25,5 15,3 0,655 3 800 0,42 YAR 207-2RF/VE495
40 80 36 21 51,8 25,3 1 30,7 19 0,8 4 800 0,43 YAT 208

80 49,2 21 51,8 30,2 1 30,7 19 0,8 4 800 0,55 YAR 208-2F
80 49,2 21 51,8 30,2 1 30,7 19 0,8 2 800 0,55 YAR 208-2RF
80 49,2 21 51,8 30,2 1 24,7 19 0,8 2 800 0,56 YAR 208-2RF/HV
80 49,2 21 51,8 30,2 1 30,7 19 0,8 2 800 0,56 YAR 208-2RF/VE495
45 85 37 22 56,8 25,8 1 33,2 21,6 0,915 4 300 0,48 YAT 209

85 49,2 22 56,8 30,2 1 33,2 21,6 0,915 4 300 0,60 YAR 209-2F
85 49,2 22 56,8 30,2 1 33,2 21,6 0,915 2 400 0,60 YAR 209-2RF
92
2.1

d y n a m i c static load speed
limit with shaft
min h6
50 90 38,8 22 62,5 27,6 1 35,1 23,2 0,98 4 000 0,54 YAT 210
90 51,6 22 62,5 32,6 1 35,1 23,2 0,98 4 000 0,69 YAR 210-2F
90 51,6 22 62,5 32,6 1 35,1 23,2 0,98 2 200 0,69 YAR 210-2RF
90 51,6 22 62,5 32,6 1 29,6 23,2 0,98 2 200 0,69 YAR 210-2RF/HV
90 51,6 22 62,5 32,6 1 35,1 23,2 0,98 2 200 0,69 YAR 210-2RF/VE495
55 100 55,6 25 69,1 33,4 1 43,6 29 1,25 3 600 0,94 YAR 211-2F
100 55,6 25 69,1 33,4 1 43,6 29 1,25 1 900 0,94 YAR 211-2RF
60 110 65,1 26 75,6 39,7 1,5 52,7 36 1,53 3 400 1,30 YAR 212-2F
110 65,1 26 75,6 39,7 1,5 52,7 36 1,53 1 800 1,30 YAR 212-2RF
65 120 68,3 27 82,5 42,9 1,5 57,2 40 1,7 3 000 1,70 YAR 213-2F
120 68,3 27 82,5 42,9 1,5 57,2 40 1,7 1 600 1,70 YAR 213-2RF
70 125 69,9 28 87 39,7 1,5 62,4 45 1,86 2 800 1,85 YAR 214-2F
75 130 73,3 29 92 46,1 1,5 66,3 49 2,04 2 600 2,05 YAR 215-2F
80 140 77,9 30 97,4 47,7 2 72,8 53 2,16 2 400 2,45 YAR 216-2F
85 150 81 34 105 50,8 2 83,2 62 2,4 2 200 3,20 YAR 217-2F
90 160 89 36 112,5 54 2 95,6 72 2,7 2 000 4,00 YAR 218-2F
100 180 98,4 40 124,5 63,4 2 124 93 3,35 1 900 5,25 YAR 220-2F
93
Y-bearings with grub screws, inch shafts
d 1/2 – 1 7/16 in
r 1
r2
B B
D d d1
s1 s1
YAT YAR-2F YAR-2RF
Dimensions Basic load Fatigue Limiting Mass Designation

ratings load speed
dynamic static limit with shaft
min h6
in/mm lbf/kN lbf/kN r/min lb/kg –
1/2 1.5748 1.08 0.47 0.95 0.63 0.01 2 150 1 070 50 9 500 0.27 YAR 203-008-2F
1 2 ,7 40 2 7 ,4 1 2 2 4 ,2 1 5 ,9 0 ,3 9 ,5 6 4 ,7 5 0 ,2 0 ,1 2
5/8 1.5748 1.08 0.47 0.95 0.63 0.01 2 150 1 070 50 9 500 0.23 YAR 203-010-2F
1 5 ,8 7 5 40 2 7 ,4 12 2 4 ,2 1 5 ,9 0 ,3 9 ,5 6 4 ,7 5 0 ,2 0 ,1 1
1.5748 0.89 0.47 0.95 0.63 0.01 2 150 1 070 50 9 500 0.21 YAT 203-010
40 2 2 ,5 12 2 4 ,2 16 0 ,3 9 ,5 6 4 ,7 5 0 ,2 0 ,1 0
3/4 1.8504 1.22 0.55 1.11 0.72 0.02 2 860 1 470 60 8 500 0.36 YAR 204-012-2F
1 9 ,0 5 47 31 14 2 8 ,2 1 8 ,3 0 ,6 1 2 ,7 6 ,5 5 0 ,2 8 0 ,1 7
1.8504 1.22 0.55 1.11 0.72 0.02 2 860 1 470 60 5 000 0.36 YAR 204-012-2RF
47 31 14 2 8 ,2 1 8 ,3 0 ,6 1 2 ,7 6 ,5 5 0 ,2 8 0 ,1 6
1.8504 1.22 0.55 1.11 0.72 0.02 2 860 1 470 60 8 500 0.34 YAR 204-012-2F/AH
47 31 14 2 8 ,2 1 8 ,3 0 ,6 1 2 ,7 6 ,5 5 0 ,2 8 0 ,1 6
1.8504 1.22 0.55 1.11 0.72 0.02 2 430 1 470 60 5 000 0.36 YAR 204-012-2RF/HV
47 31 14 2 8 ,2 1 8 ,3 0 ,6 1 0 ,8 6 ,5 5 0 ,2 8 0 ,1 6
1.8504 1.00 0.55 1.11 0.72 0.02 2 860 1 470 60 8 500 0.31 YAT 204-012
47 2 5 ,5 14 2 8 ,2 1 8 ,3 0 ,6 1 2 ,7 6 ,5 5 0 ,2 8 0 ,1 4
7/8 2.0472 1.07 0.59 1.33 0.77 0.02 3 150 1 760 80 7 000 0.37 YAT 205-014
2 2 ,2 2 5 52 2 7 ,2 1 5 3 3 ,7 1 9 ,5 0 ,6 14 7 ,8 0 ,3 3 5 0 ,1 7
15/16 2.0472 1.34 0.59 1.33 0.78 0.02 3 150 1 760 80 7 000 0.47 YAR 205-015-2F
2 3 ,8 1 3 52 3 4 ,1 15 3 3 ,7 1 9 ,8 0 ,6 14 7 ,8 0 ,3 3 5 0 ,2 1
2.0472 1.07 0.59 1.33 0.77 0.02 3 150 1 760 80 7 000 0.40 YAT 205-015
52 2 7 ,2 15 3 3 ,7 1 9 ,5 0 ,6 14 7 ,8 0 ,3 3 5 0 ,1 8
1 2.0472 1.34 0.59 1.33 0.78 0.02 3 150 1 760 80 7 000 0.43 YAR 205-100-2F
2 5 ,4 52 3 4 ,1 15 3 3 ,7 1 9 ,8 0 ,6 14 7 ,8 0 ,3 3 5 0 ,1 9
2.0472 1.34 0.59 1.33 0.78 0.02 3 150 1 760 80 4 300 0.43 YAR 205-100-2RF
52 3 4 ,1 15 3 3 ,7 1 9 ,8 0 ,6 14 7 ,8 0 ,3 3 5 0 ,1 9
2.0472 1.34 0.59 1.33 0.78 0.02 3 150 1 760 80 7 000 0.43 YAR 205-100-2F/AH
52 3 4 ,1 15 3 3 ,7 1 9 ,8 0 ,6 14 7 ,8 0 ,3 3 5 0 ,1 9
2.0472 1.34 0.59 1.33 0.78 0.02 2 680 1 760 80 4 300 0.43 YAR 205-100-2RF/HV
52 3 4 ,1 15 3 3 ,7 1 9 ,8 0 ,6 1 1 ,9 7 ,8 0 ,3 3 5 0 ,1 9
2.0472 1.07 0.59 1.33 0.77 0.02 3 150 1 760 80 7 000 0.36 YAT 205-100
52 2 7 ,2 15 3 3 ,7 1 9 ,5 0 ,6 14 7 ,8 0 ,3 3 5 0 ,1 6
1 1/16 2.4409 1.50 0.71 1.56 0.87 0.02 4 390 2 520 110 6 300 0.76 YAR 206-101-2F
2 6 ,9 8 8 62 3 8 ,1 1 8 3 9 ,7 2 2 ,2 0 ,6 1 9 ,5 1 1 ,2 0 ,4 7 5 0 ,3 4
94
2.1

ratings load speed
min h6
1 1/ 8 2.4409 1.50 0.71 1.56 0.87 0.02 4 390 2 520 110 6 300 0.76 YAR 206-102-2F
28,575 62 38,1 18 39,7 22,2 0,6 19,5 11,2 0,475 0,34
1 3/16 2.4409 1.50 0.71 1.56 0.87 0.02 4 390 2 520 110 6 300 0.68 YAR 206-103-2F
30,163 62 38,1 18 39,7 22,2 0,6 19,5 11,2 0,475 0,31
2.4409 1.50 0.71 1.56 0.87 0.02 4 390 2 520 110 6 300 0.68 YAR 206-103-2F/AH
62 38,1 18 39,7 22,2 0,6 19,5 11,2 0,475 0,31
2.4409 1.22 0.71 1.56 0.87 0.04 4 390 2 520 110 6 300 0.62 YAT 206-103
62 31 18 39,7 22 1 19,5 11,2 0,475 0,28
2.4409 1.5 0.71 1.56 0.87 0.02 3 670 2 520 110 3 800 0.64 YAR 206-103-2RF/HV
62 38,1 18 39,7 22,2 0,6 16,3 11,2 0,475 0,29
1 1/ 4 2.4409 1.50 0.71 1.56 0.87 0.02 4 390 2 520 110 6 300 0.62 YAR 206-104-2F
31,75 62 38,1 18 39,7 22,2 0,6 19,5 11,2 0,475 0,28
2.8346 1.69 0.75 1.82 1.00 0.04 5 740 3 440 150 5 300 1.15 YAR 207-104-2F
72 42,9 19 46,1 25,4 1 25,5 15,3 0,655 0,52
2.8346 1.69 0.75 1.82 1.00 0.04 5 740 3 440 150 3 200 1.00 YAR 207-104-2RF
72 42,9 19 46,1 25,4 1 25,5 15,3 0,655 0,46
2.8346 1.69 0.75 1.82 1.00 0.04 4 860 3 440 150 3 800 1.15 YAR 207-104-2RF/HV
72 42,9 19 46,1 25,4 1 21,6 15,3 0,655 0,52
2.4409 1.22 0.71 1.56 0.87 0.04 4 390 2 520 110 6 300 0.61 YAT 206-104
62 31 18 39,7 22 1 19,5 11,2 0,475 0,28
1 5/16 2.8346 1.69 0.75 1.82 1.00 0.04 5 740 3 440 150 5 300 1.05 YAR 207-105-2F
33,338 72 42,9 19 46,1 25,4 1 25,5 15,3 0,655 0,48
1 3/ 8 2.8346 1.69 0.75 1.82 1.00 0.04 5 740 3 440 150 5 300 1.00 YAR 207-106-2F
34,925 72 42,9 19 46,1 25,4 1 25,5 15,3 0,655 0,46
2.8346 1.69 0.75 1.81 1 0.04 4 860 3 440 150 3 800 0.93 YAR 207-106-2RF/HV
72 42,9 19 46,1 25,4 1 21,6 15,3 0,655 0,42
1 7/16 2.8346 1.69 0.75 1.82 1.00 0.04 5 740 3 440 150 5 300 0.93 YAR 207-107-2F
36,513 72 42,9 19 46,1 25,4 1 25,5 15,3 0,655 0,42
2.8346 1.69 0.75 1.82 1.00 0.04 4 860 3 440 150 3 800 0.95 YAR 207-107-2RF/HV
72 42,9 19 46,1 25,4 1 21,6 15,3 0,655 0,43
3.1496 1.94 0.83 2.04 1.19 0.04 6 910 4 280 180 4 800 1.55 YAR 208-107-2F
80 49,2 21 51,8 30,2 1 30,7 19 0,8 0,70
2.8346 1.38 0.75 1.82 1.00 0.04 5 740 3 440 150 5 300 0.83 YAT 207-107
72 35 19 46,1 25,5 1 25,5 15,3 0,655 0,38
95
d 1 1/2 – 2 15/16 in
r1
r2
B B
D d d1
s1 s1
YAT YAR-2F YAR-2RF

ratings load speed
min h6
1 1/ 2 3.1496 1.94 0.83 2.04 1.19 0.04 6 910 4 280 180 4 800 1.30 YAR 208-108-2F
38,1 80 49,2 21 51,8 30,2 1 30,7 19 0,8 0,59
3.1496 1.94 0.83 2.04 1.19 0.04 6 910 4 280 180 2 800 1.30 YAR 208-108-2RF
80 49,2 21 51,8 30,2 1 30,7 19 0,8 0,59
3.3465 1.94 0.87 2.24 1.19 0.04 7 470 4 860 210 4 300 1.89 YAR 209-108-2F
85 49,2 22 56,8 30,2 1 33,2 21,6 0,915 0,86
3.1496 1.57 0.83 2.04 1.12 0.04 6 910 4 280 180 4 800 1.29 YAT 208-108
80 40 21 51,8 28,5 1 30,7 19 0,8 0,58
3.1496 1.94 0.83 2.04 1.19 0.04 5 560 4 280 180 2 800 1.25 YAR 208-108-2RF/HV
80 49,2 21 51,8 30,2 1 24,7 19 0,8 0,56
1 9/16 3.1496 1.94 0.83 2.04 1.19 0.04 6 910 4 280 180 4 300 1.40 YAR 208-109-2F
39,688 80 49,2 21 51,8 30,2 1 30,7 19 0,8 0,64
1 5/ 8 3.3465 1.94 0.87 2.24 1.19 0.04 7 470 4 860 210 4 300 1.75 YAR 209-110-2F
41,275 85 49,2 22 56,8 30,2 1 33,2 21,6 0,915 0,79
1 11/16 3.3465 1.94 0.87 2.24 1.19 0.04 7 470 4 860 210 4 300 1.65 YAR 209-111-2F
42,863 85 49,2 22 56,8 30,2 1 33,2 21,6 0,915 0,75
3.3465 1.63 0.87 2.24 1.20 0.04 7 470 4 860 210 4 300 1.40 YAT 209-111
85 41,5 22 56,8 30,5 1 33,2 21,6 0,915 0,65
1 3/ 4 3.3465 1.94 0.87 2.24 1.19 0.04 7 470 4 860 210 4 300 1.35 YAR 209-112-2F
44,45 85 49,2 22 56,8 30,2 1 33,2 21,6 0,915 0,62
3.3465 1.94 0.87 2.24 1.19 0.04 7 470 4 860 210 2 400 1.35 YAR 209-112-2RF
85 49,2 22 56,8 30,2 1 33,2 21,6 0,915 0,62
3.3465 1.63 0.87 2.24 1.20 0.04 7 470 4 860 210 4 300 1.35 YAT 209-112
85 41,5 22 56,8 30,5 1 33,2 21,6 0,915 0,60
1 15/16 3.5433 2.03 0.87 2.46 1.28 0.04 7 900 5 220 220 4 000 1.70 YAR 210-115-2F
49,213 90 51,6 22 62,5 32,6 1 35,1 23,2 0,98 0,78
3.5433 2.03 0.87 2.46 1.28 0.04 7 900 5 220 220 2 200 1.70 YAR 210-115-2RF
90 51,6 22 62,5 32,6 1 35,1 23,2 0,98 0,78
3.5433 2.03 0.87 2.46 1.28 0.04 6 660 5 220 220 2 200 1.70 YAR 210-115-2RF/HV
90 51,6 22 62,5 32,6 1 29,6 23,2 0,98 0,78
3.5433 2.03 0.87 2.46 1.28 0.04 7 900 5 220 220 2 200 1.70 YAR 210-115-2RF/VE495
90 51,6 22 62,5 32,6 1 35,1 23,2 0,98 0,78
3.5433 1.69 0.87 2.46 1.26 0.04 7 900 5 220 220 4 000 1.50 YAT 210-115
90 43 22 62,5 32 1 35,1 23,2 0,98 0,67
96
2.1

ratings load speed
min h6
2 3.9370 2.19 0.98 2.72 1.32 0.04 9 810 6 530 280 3 600 2.45 YAR 211-200-2F
50,8 100 55,6 25 69,1 33,4 1 43,6 29 1,25 1,10
3.9370 2.19 0.98 2.72 1.32 0.04 9 810 6 530 280 1 900 2.45 YAR 211-200-2RF
100 55,6 25 69,1 33,4 1 43,6 29 1,25 1,10
3.9370 1.77 0.98 2.72 1.28 0.04 9 810 6 530 280 3 600 2.30 YAT 211-200
100 45 25 69,1 32,5 1 43,6 29 1,25 1,05
2 3/16 3.9370 2.19 0.98 2.72 1.32 0.04 9 810 6 530 280 3 600 2.30 YAR 211-203-2F
55,563 100 55,6 25 69,1 33,4 1 43,6 29 1,25 1,05
3.9370 2.19 0.98 2.72 1.32 0.04 9 810 6 530 280 3 600 2.30 YAR 211-203-2F/AH
100 55,6 25 69,1 33,4 1 43,6 29 1,25 1,05
4.3307 2.56 1.02 2.98 1.56 0.06 11 860 8 100 340 3 400 3.75 YAR 212-203-2F
110 65,1 26 75,6 39,7 1,5 52,7 36 1,53 1,70
2 1/ 4 4.3307 2.56 1.02 2.98 1.56 0.06 11 860 8 100 340 3 400 3.55 YAR 212-204-2F
57,15 110 65,1 26 75,6 39,7 1,5 52,7 36 1,53 1,60
4.3307 1.91 1.02 2.98 1.38 0.06 11 860 8 100 340 3 400 2.75 YAT 212-204
110 48,5 26 75,6 35 1,5 52,7 36 1,53 1,25
2 7/16 4.3307 2.56 1.02 2.98 1.56 0.06 11 860 8 100 340 3 400 3.00 YAR 212-207-2F
61,913 110 65,1 26 75,6 39,7 1,5 52,7 36 1,53 1,35
4.3307 1.91 1.02 2.98 1.38 0.06 11 860 8 100 340 3 400 2.75 YAT 212-207
110 48,5 26 75,6 35 1,5 52,7 36 1,53 1,25
4.9213 2.75 1.10 3.43 1.56 0.06 14 040 9 900 420 2 800 5.40 YAR 214-207-2F
125 69,93 28 87 39,7 1,5 62,4 44 1,86 2,45
2 1/ 2 4.7244 2.69 1.06 3.25 1.69 0.06 12 870 9 000 380 3 000 4.20 YAR 213-208-2F
63,5 120 68,3 27 82,5 42,9 1,5 57,2 40 1,7 1,90
4.7244 2.69 1.06 3.25 1.69 0.06 12 870 9 000 380 1 600 4.20 YAR 213-208-2RF
120 68,3 27 82,5 42,9 1,5 57,2 40 1,7 1,90
4.9213 2.75 1.10 3.43 1.56 0.06 14 040 9 900 420 2 800 5.30 YAR 214-208-2F
125 69,93 28 87 39,7 1,5 62,4 44 1,86 2,40
2 11/16 4.7244 2.69 1.06 3.25 1.69 0.06 12 870 9 000 380 3 000 3.75 YAR 213-211-2F
68,263 120 68,3 27 82,5 42,9 1,5 57,2 40 1,7 1,70
2 15/16 5.1181 2.88 1.14 3.62 1.82 0.06 14 920 11 030 460 2 600 4.85 YAR 215-215-2F
74,613 130 73,3 29 92 46,1 1,5 66,3 49 2,04 2,20
5.1181 2.11 1.14 3.62 1.54 0.06 14 920 11 030 460 2 600 4.65 YAT 215-215
130 53,5 29 92 39 1,5 66,3 49 2,04 2,10
97
d 3 in
r1
r2
B B
D d d1
s1 s1
YAT YAR-2F YAR-2RF

ratings load speed
min h6
3 5.5118 3.07 1.18 3.83 1.88 0.08 16 400 11 900 486 2 400 6.30 YAR 216-300-2F
76,2 140 77,9 30 97,4 47,7 2 72,8 53 2,16 2,85
5.5118 2.19 1.18 3.83 1.54 0.08 16 370 11 920 490 2 400 5.20 YAT 216-300
140 55,5 30 97,4 39 2 72,8 53 2,16 2,35
98
2.1
9 9
Y-bearings with an eccentric locking collar, metric shafts
d 15 – 60 mm
r1
r2
B1 B1
D d2 d d1
s1 s1
YET YEL-2F YEL-2RF/VL065

limit with shaft
d D B1 C d1 d2 s1 r1,2 C C0 Pu tolerance
min h6
15 40 28,6 12 24,2 27,2 22,1 0,3 9,56 4,75 0,2 9 500 0,12 YET 203/15
17 40 28,6 12 24,2 27,2 22,1 0,3 9,56 4,75 0,2 9 500 0,10 YET 203
20 47 31 14 28,2 32,4 23,5 0,6 12,7 6,55 0,28 8 500 0,18 YET 204
47 31 14 28,2 32,4 23,5 0,6 12,7 6,55 0,28 8 500 0,18 YET 204/VL065
47 43,7 14 28,2 32,4 26,6 0,6 12,7 6,55 0,28 8 500 0,19 YEL 204-2F
47 43,7 14 28,2 32,4 26,6 0,6 12,7 6,55 0,28 5 000 0,19 YEL 204-2RF/VL065
25 52 31 15 33,7 37,4 23,5 0,6 14 7,8 0,335 7 000 0,18 YET 205
52 31 15 33,7 37,4 23,5 0,6 14 7,8 0,335 7 000 0,18 YET 205/VL065
52 44,4 15 33,7 37,4 26,9 0,6 14 7,8 0,335 7 000 0,24 YEL 205-2F
52 44,4 15 33,7 37,4 26,9 0,6 14 7,8 0,335 4 300 0,24 YEL 205-2RF/VL065
30 62 35,7 18 39,7 44,1 26,7 0,6 19,5 11,2 0,475 6 300 0,30 YET 206
62 35,7 18 39,7 44,1 26,7 0,6 19,5 11,2 0,475 6 300 0,30 YET 206/VL065
62 48,4 18 39,7 44,1 30,1 0,6 19,5 11,2 0,475 6 300 0,36 YEL 206-2F
62 48,4 18 39,7 44,1 30,1 0,6 19,5 11,2 0,475 3 900 0,36 YEL 206-2RF/VL065
35 72 38,9 19 46,1 51,1 29,4 1 25,5 15,3 0,655 5 300 0,44 YET 207
72 38,9 19 46,1 51,1 29,4 1 25,5 15,3 0,655 5 300 0,44 YET 207/VL065
72 51,1 19 46,1 51,1 32,3 1 25,5 15,3 0,655 5 300 0,55 YEL 207-2F
72 51,1 19 46,1 51,1 32,3 1 25,5 15,3 0,655 3 200 0,55 YEL 207-2RF/VL065
40 80 43,7 21 51,8 56,5 32,7 1 30,7 19 0,8 4 800 0,59 YET 208
80 43,7 21 51,8 56,5 32,7 1 30,7 19 0,8 4 800 0,59 YET 208/VL065
80 56,3 21 51,8 56,5 34,9 1 30,7 19 0,8 4 800 0,67 YEL 208-2F
80 56,3 21 51,8 56,5 34,9 1 30,7 19 0,8 2 800 0,67 YEL 208-2RF/VL065
45 85 43,7 22 56,8 62 32,7 1 33,2 21,6 0,915 4 300 0,65 YET 209
85 56,3 22 56,8 62 34,9 1 33,2 21,6 0,915 4 300 0,74 YEL 209-2F
50 90 43,7 22 62,5 67,2 32,7 1 35,1 23,2 0,98 4 000 0,70 YET 210
90 62,7 22 62,5 67,2 38,1 1 35,1 23,2 0,98 4 000 0,89 YEL 210-2F
55 100 48,4 25 69,1 74,5 36,4 1 43,6 29 1,25 3 600 0,90 YET 211
100 71,4 25 69,1 74,5 43,6 1 43,6 29 1,25 3 600 1,20 YEL 211-2F
60 110 53,1 26 75,6 82 39,6 1,5 52,7 36 1,53 3 400 1,30 YET 212
110 77,8 26 75,6 82 46,8 1,5 52,7 36 1,53 3 400 1,60 YEL 212-2F
100
2.2
101
Y-bearings with an eccentric locking collar, inch shafts
d 1/2 – 2 7/16 in
r1
r2
B1 B1
D d2 d d1
s1 s1
YET YEL-2F

ratings load speed
min h6
1/2 1.5748 1.47 0.47 0.95 1.07 0.92 0.01 2 150 1 070 45 9 500 0.33 YEL 203-008-2F
12,7 40 37,3 12 24,2 27,2 23,4 0,3 9,56 4,75 0,2 0,15
1.5748 1.13 0.47 0.95 1.07 0.87 0.01 2 150 1 070 50 9 500 0.29 YET 203-008
40 28,6 12 24,2 27,2 22,1 0,3 9,56 4,75 0,2 0,13
3/4 1.8504 1.72 0.55 1.11 1.28 1.05 0.02 2 860 1 470 60 8 500 0.44 YEL 204-012-2F
19,05 47 43,7 14 28,2 32,4 26,6 0,6 12,7 6,55 0,28 0,20
1.8504 1.22 0.55 1.11 1.28 0.93 0.02 2 860 1 470 60 8 500 0.38 YET 204-012
47 31 14 28,2 32,4 23,5 0,6 12,7 6,55 0,28 0,17
1 2.0472 1.22 0.59 1.33 1.47 0.93 0.02 3 150 1 760 80 7 000 0.40 YET 205-100
25,4 52 31 15 33,7 37,4 23,5 0,6 14 7,8 0,335 0,18
2.0472 1.75 0.59 1.33 1.47 1.06 0.02 3 150 1 760 80 7 000 0.53 YEL 205-100-2F
52 44,4 15 33,7 37,4 26,9 0,6 14 7,8 0,335 0,24
1 1/8 2.4409 1.91 0.71 1.56 1.74 1.19 0.02 4 390 2 520 110 6 300 0.86 YEL 206-102-2F
28,575 62 48,4 18 39,7 44,1 30,1 0,6 19,5 11,2 0,475 0,39
2.4409 1.41 0.71 1.56 1.74 1.05 0.02 4 390 2 520 110 6 300 0.73 YET 206-102
62 35,7 18 39,7 44,1 26,7 0,6 19,5 11,2 0,475 0,33
1 3/16 2.4409 1.91 0.71 1.56 1.74 1.19 0.02 4 390 2 520 110 6 300 0.82 YEL 206-103-2F
30,163 62 48,4 18 39,7 44,1 30,1 0,6 19,5 11,2 0,475 0,37
2.4409 1.41 0.71 1.56 1.74 1.05 0.02 4 390 2 520 110 6 300 0.68 YET 206-103
62 35,7 18 39,7 44,1 26,7 0,6 19,5 11,2 0,475 0,31
1 1/4 2.8346 2.01 0.75 1.82 2.01 1.27 0.04 5 740 3 440 150 5 300 1.30 YEL 207-104-2F
31,75 72 51,1 19 46,1 51,1 32,3 1 25,5 15,3 0,655 0,60
2.4409 1.41 0.71 1.56 1.74 1.05 0.02 4 390 2 520 110 6 300 0.64 YET 206-104
62 35,7 18 39,7 44,1 26,7 0,6 19,5 11,2 0,475 0,29
2.8346 1.53 0.75 1.82 2.01 1.16 0.04 5 740 3 440 150 5 300 1.10 YET 207-104
72 38,9 19 46,1 51,1 29,4 1 25,5 15,3 0,655 0,51
1 5/16 2.8346 1.53 0.75 1.82 2.01 1.16 0.04 5 740 3 440 150 5 300 1.25 YET 207-105
33,338 72 38,9 19 46,1 51,1 29,4 1 25,5 15,3 0,655 0,56
1 3/8 2.8346 2.01 0.75 1.82 2.01 1.27 0.04 5 740 3 440 150 5 300 1.20 YEL 207-106-2F
34,925 72 51,1 19 46,1 51,1 32,3 1 25,5 15,3 0,655 0,55
2.8346 1.53 0.75 1.82 2.01 1.16 0.04 5 740 3 440 150 5 300 1.05 YET 207-106
72 38,9 19 46,1 51,1 29,4 1 25,5 15,3 0,655 0,47
102
2.2

ratings load speed
min h6
1 7/16 2.8346 2.01 0.75 1.82 2.01 1.27 0.04 5 740 3 440 150 5 300 1.15 YEL 207-107-2F
36,513 72 51,1 19 46,1 51,1 32,3 1 25,5 15,3 0,655 0,53
2.8346 1.53 0.75 1.82 2.01 1.16 0.04 5 740 3 440 150 5 300 1.97 YET 207-107
72 38,9 19 46,1 51,1 29,4 1 25,5 15,3 0,655 0,44
1 1/ 2 3.1496 1.72 0.83 2.04 2.22 1.29 0.04 6 910 4 280 180 4 800 1.40 YET 208-108
38,1 80 43,7 21 51,8 56,5 32,7 1 30,7 19 0,8 0,63
3.1496 2.22 0.83 2.04 2.22 1.37 0.04 6 910 4 280 180 4 800 1.70 YEL 208-108-2F
80 56,3 21 51,8 56,5 34,9 1 30,7 19 0,8 0,77
1 11/16 3.3465 2.22 0.87 2.24 2.44 1.37 0.04 7 470 4 860 210 4 300 1.95 YEL 209-111-2F
42,863 85 56,3 22 56,8 62 34,9 1 33,2 21,6 0,915 0,88
3.3465 1.72 0.87 2.24 2.44 1.29 0.04 7 470 4 860 210 4 300 1.65 YET 209-111
85 43,7 22 56,8 62 32,7 1 33,2 21,6 0,915 0,74
1 3/4 3.3465 2.22 0.87 2.24 2.44 1.37 0.04 7 470 4 860 210 4 300 1.75 YEL 209-112-2F
44,45 85 56,3 22 56,8 62 34,9 1 33,2 21,6 0,915 0,80
3.3465 1.72 0.87 2.24 2.44 1.29 0.04 7 470 4 860 210 4 300 1.55 YET 209-112
85 43,7 22 56,8 62 32,7 1 33,2 21,6 0,915 0,70
1 15/16 3.5433 2.47 0.87 2.46 2.65 1.50 0.04 7 900 5 220 220 4 000 2.05 YEL 210-115-2F
49,213 90 62,7 22 62,5 67,2 38,1 1 35,1 23,2 0,98 0,94
2 3.9370 2.81 0.98 2.72 2.93 1.72 0.04 9 810 6 530 280 3 600 3.30 YEL 211-200-2F
50,8 100 71,4 25 69,1 74,5 43,6 1 43,6 29 1,25 1,50
2 3/16 3.9370 2.81 0.98 2.72 2.93 1.72 0.04 9 810 6 530 280 3 600 2.85 YEL 211-203-2F
55,563 100 71,4 25 69,1 74,5 43,6 1 43,6 29 1,25 1,30
2 7/16 4.3307 3.06 1.02 2.98 3.23 1.84 0.06 11 860 8 100 340 3 400 3.75 YEL 212-207-2F
61,913 110 77,8 26 75,6 82 46,8 1,5 52,7 36 1,53 1,70
4.3307 2.09 1.02 2.98 3.23 1.84 0.06 11 860 8 100 340 3 400 2.65 YET 212-207
110 53,1 26 75,6 82 46,8 1,5 52,7 36 1,53 1,20
103
Y-bearings with a tapered bore on an adapter sleeve, metric shafts
d 20 – 60 mm
B
C
B1
D d
s1
Dimensions Basic load ratings Fatigue Limiting Mass Designations

dynamic static load speed Bearing Bearing Adapter
limit with shaft + sleeve
d D B B1 C s1 C C0 Pu tolerance sleeve
h6
20 52 24 35 15 20 14 7,8 0,335 7 000 0,22 YSA 205-2FK H 2305
25 62 28 38 18 22 19,5 11,2 0,475 6 300 0,33 YSA 206-2FK H 2306
30 72 30,5 43 19 24,3 25,5 15,3 0,655 5 300 0,47 YSA 207-2FK H 2307
35 80 33,9 46 21 27 30,7 19 0,8 4 800 0,69 YSA 208-2FK H 2308
40 85 35 50 22 28,5 33,2 21,6 0,915 4 300 0,77 YSA 209-2FK H 2309
45 90 37 55 22 30,5 35,1 23,2 0,98 4 000 0,88 YSA 210-2FK H 2310
50 100 40 59 25 32,5 43,6 29 1,25 3 600 1,10 YSA 211-2FK H 2311
55 110 42,5 62 26 34,3 52,7 36 1,53 3 400 1,40 YSA 212-2FK H 2312
60 120 43,5 65 27 35,8 57,2 40 1,7 3 000 1,70 YSA 213-2FK H 2313
104
2.3
105
Y-bearings with a tapered bore on an adapter sleeve, inch shafts
d 3/4 – 2 3/8 in
B
C
B1
D d
s1
Dimensions Basic load Fatigue Limiting Mass Designations

ratings load speed Bearing Bearing Adapter
dyn. stat limit with shaft + sleeve
h6
3/4 2.0472 0.95 1.38 0.59 0.79 3 150 1 760 80 7 000 0.49 YSA 205-2FK HE 2305
19,05 52 24 35 15 20 14 7,8 0,335 0,22
15/16 2.4409 1.10 1.50 0.71 0.87 4 390 2 520 110 6 300 0.77 YSA 206-2FK HA 2306
23,813 62 28 38 18 22 20 11,2 0,475 0,35
1 2.4409 1.10 1.50 0.71 0.87 4 390 2 520 110 6 300 0.73 YSA 206-2FK HE 2306
25,4 62 28 38 18 22 20 11,2 0,475 0,33
1 3/16 2.8346 1.20 1.69 0.75 0.96 5 740 3 440 150 5 300 1.05 YSA 207-2FK HA 2307
30,163 72 30,5 43 19 24,3 26 15,3 0,655 0,47
1 1/ 4 3.1496 1.34 1.81 0.83 1.06 6 910 4 280 180 4 800 1.50 YSA 208-2FK HE 2308
31,75 80 33,9 46 21 27 31 19 0,8 0,69
1 7/16 3.3465 1.38 1.97 0.87 1.12 7 470 4 860 210 4 300 1.80 YSA 209-2FK HA 2309
36,513 85 35 50 22 28,5 33 21,6 0,915 0,81
1 1/ 2 3.3465 1.38 1.97 0.87 1.12 7 470 4 860 210 4 300 1.70 YSA 209-2FK HE 2309
38,1 85 35 50 22 28,5 33 21,6 0,915 0,77
1 5/ 8 3.5433 1.46 2.17 0.87 1.20 7 900 5 220 220 4 000 2.05 YSA 210-2FK HS 2310
41,275 90 37 55 22 30,5 35 23,2 0,98 0,94
1 11/16 3.5433 1.46 2.17 0.87 1.20 7 900 5 220 220 4 000 2 YSA 210-2FK HA 2310
42,863 90 37 55 22 30,5 35 23,2 0,98 0,91
1 3/ 4 3.5433 1.46 2.17 0.87 1.20 7 900 5 220 220 4 000 1.95 YSA 210-2FK HE 2310
44,45 90 37 55 22 30,5 35 23,2 0,98 0,88
1 15/16 3.937 1.58 2.32 0.98 1.28 9 810 6 530 280 3 600 2.45 YSA 211-2FK HA 2311
49,213 100 40 59 25 32,5 44 29 1,25 1,10
2 3.937 1.58 2.32 0.98 1.28 9 810 6 530 280 3 600 2.45 YSA 211-2FK HE 2311 B
50,800 100 40 59 25 32,5 44 29 1,25 1,10
2 1/ 8 4.3307 1.67 2.44 1.02 1.35 11 860 8 100 340 3 400 3.10 YSA 212-2FK HS 2312
53,975 110 42,5 62 26 34,3 53 36 1,53 1,40
2 3/16 4.7244 1.71 2.56 1.06 1.41 12 870 9 000 380 3 000 4.20 YSA 213-2FK HA 2313
55,563 120 43,5 65 27 35,8 57 40 1,7 1,90
106
2.3
Dimensions Basic load Fatigue Limiting Mass Designations

ratings load speed Bearing Bearing Adapter
dyn. stat limit with shaft + sleeve
h6
2 1/ 4 4.7244 1.71 2.56 1.06 1.41 12 870 9 000 380 3 000 3.95 YSA 213-2FK HE 2313
57,15 120 43,5 65 27 35,8 57 40 1,7 1,80
2 3/ 8 4.7244 1.71 2.56 1.06 1.41 12 870 9 000 380 3 000 3.75 YSA 213-2FK HS 2313
60,325 120 43,5 65 27 35,8 57 40 1,7 1,70
107
Y-bearings with a standard inner ring, metric shafts
d 17 – 60 mm
r1
r2
D d d1

limit
d D B d1 r1,2 C C0 Pu
min
17 40 12 24,2 0,6 9,56 4,75 0,2 12 000 0,056 1726203-2RS1
20 47 14 28,5 1 12,7 6,55 0,28 10 000 0,095 1726204-2RS1
25 52 15 34 1 14 7,8 0,335 8 500 0,11 1726205-2RS1

62 17 36,6 1.1 22,5 11,6 0,49 7 500 0,20 1726305-2RS1
30 62 16 40,3 1 19,5 11,2 0,475 7 500 0,18 1726206-2RS1

72 19 44,6 1,1 28,1 16 0,67 6 300 0,30 1726306-2RS1
35 72 17 46,9 1,1 25,5 15,3 0,655 6 300 0,25 1726207-2RS1

80 21 49,6 1,5 33,2 19 0,815 6 000 0,40 1726307-2RS1
40 80 18 52,6 1,1 30,7 19 0,8 5 600 0,32 1726208-2RS1

90 23 56,1 1,5 41 24 1 5 000 0,55 1726308-2RS1
45 85 19 57,6 1,1 33,2 21,6 0,915 5 000 0,37 1726209-2RS1

100 25 62,1 1,5 52,7 31,5 1,34 4 500 0,73 1726309-2RS1
50 90 20 62,5 1,1 35,1 23,2 0,98 4 800 0,41 1726210-2RS1

110 27 68,7 2 61,8 38 1,6 4 300 0,95 1726310-2RS1
55 100 21 69 1,5 43,6 29 1,25 4 300 0,54 1726211-2RS1
60 110 22 75,5 1,5 52,7 36 1,53 4 000 0,70 1726212-2RS1
108
2.4
109
Y-bearing plummer block units
Designs ................................................................................................................. 112
Y-TECH plummer block units................................................................................... 113 3

Y-bearing plummer block units with a cast housing .................................................. 113
Y-bearing plummer block units with a pressed steel housing ..................................... 116
Data – general ....................................................................................................... 116

Dimensions.................................................................................................................................... 116
T o l erances ...................................................................................................................................... 117
Materials ........................................................................................................................................ 117
Load carrying ability of the housings............................................................................................ 117
End covers ..................................................................................................................................... 118
Attaching to a support surface...................................................................................................... 118
Grease fills ..................................................................................................................................... 118
Mounting ....................................................................................................................................... 118
Product tables ....................................................................................................... 120

3.1 Y-TECH plummer block units with grub screws, metric shafts .......................................... 120
3.2 Y-bearing plummer block units with a cast housing and grub screws,
metric shafts ......................................................................................................................... 122
inch shafts ............................................................................................................................. 126
3.3 Y-bearing plummer block units with a cast housing and an eccentric locking collar
metric shafts ......................................................................................................................... 134
inch shafts ............................................................................................................................. 136
3.4 Y-bearing plummer block units with a cast housing and an adapter sleeve,
metric shafts ......................................................................................................................... 142
inch shafts ............................................................................................................................. 144
3.5 Y-bearing plummer block units with a shortened cast housing and grub screws,
metric shafts ......................................................................................................................... 148
3.6 Y-bearing plummer block units with a shortened cast housing and an eccentric locking collar,
metric shafts ......................................................................................................................... 150
3.7 Y-bearing plummer block units with a pressed steel housing and grub screws,
metric shafts ......................................................................................................................... 152
inch shafts ............................................................................................................................. 156
3.8 Y-bearing plummer block units with a pressed steel housing and an eccentric locking collar,
metric shafts ......................................................................................................................... 158
inch shafts ............................................................................................................................ 160
111
Designs Fig. 1
S K F Y - b e aring plummer (pillow) block units are

available as standard in a wide variety of
designs. The standard assortment includes
plummer block units with housings made of:
• composite material († fig. 1) referred to as

Y-TECH plummer block units
• pressed sheet steel († fig. 3)
They are located on the shaft via the inner ring

of the insert bearing with either:
• grub (set) screws

• an eccentric locking collar
• an adapter sleeve
Fig. 2
The Y-bearing can be sealed with either:
• the standard integral seal

• the standard integral seal and an additional
flinger
• the highly efficient multiple seal
Additional information about Y-bearings can be

found in the section Y-bearings, starting on
page 79.
Y-bearing plummer block units available from
stock are listed in the product tables. Other units
can be composed by ordering the parts separately.
The table on pages 114 and 115 shows the wide
variety of combinations of Y-bearings and
Y-bearing housings.
Fig. 3
112
Y-TECH plummer block units Fig. 4
Y-TECH plummer block units have housings made

of composite material. They were developed for
bearing arrangements that must operate reliably
in difficult environments for extended periods
without maintenance.
Y-TECH plummer block units in the SYK series
are fitted with Y-bearings in the YAR 2-2F or
YAR 2-2RF series and are attached to the shaft
with grub screws († fig. 4). These units are
part of the standard SKF product range.
For additional information about Y-TECH
plummer block units for the food industry,
refer to page 274. 3
Y-bearing plummer block Fig. 5

units with a cast housing
Y-bearing plummer block units with a grey cast
iron housing can be relubricated through a
grease fitting in the housing. This makes them
especially suitable for bearing arrangements
that operate under any of the following
conditions:
• high levels of contamination

• high speeds
• high temperatures
• relatively heavy loads
Four different housing designs are available:
• SY(J) series with two oblong holes for the

attachment bolts in the base of the housing
Fig. 6
(† fig. 5)
• SYH series, which is similar to the SY series,
but with a lower centre height
• SYM series, which is similar to the SY series,
but accommodates a larger bearing for a given
shaft size, resulting in a greater load carrying
capacity
• SYF(J) series with a shortened base that con-
tains two threaded holes in the support base
(† fig. 6)
113
Y-bearing unit Y-bearing housings
Y-bearings SYK 5(00) SY 5(00) SYJ 5(00) SYH 5(00) SYM 5(00) SYF 5(00)
YAR 2-2F
SYK .. TF SY .. TF SYJ .. TF SYH .. TF SYM .. TF SYF .. TF
20–40 mm 12–65 mm 20–100 mm 20–50 mm
1/2–2 15/16 in. 3/4–2 1/2 in. 1/2–2 7/16 in. 1 7/16–3 in. 3/4–1 3/4in.1)
YAR 2-2RF
SYK .. TR SY .. TR
20–40 mm 20–60 mm 20–65 mm1) – – 20–50 mm1)
3/4–2 1/2in.1) in.1)
3/4–2 1/2 in.1)
3/4–1 3/4
YAR 2-2RF/HV
20–40 mm1) 20–50 mm 20–50 mm – – 20–50 mm
in.1)
3/4–1 1/2 3/4–1 15/16
in. 3/4–1 15/16
in. 3/4–1 15/16
in.
YAR 2-2RF/
VE495
20–40 mm1) 20–50 mm 20–50 mm – – 20–50 mm
YAT 2
20–40 mm1) 17–50 mm1) 20–50 mm1) – – 20–50 mm1)
YEL 2-2F
SY .. WF SYH .. WF
20–40 mm1) 20–60 mm 20–60 mm1) – 20–50 mm1)
17/16–1 15/16 in. 3/4–2 7/16 in.
YEL 2-2RF/
VL065
20–40 mm1) 20–40 mm1) 20–40 mm1) – – 20–40 mm1)
YET 2
SY .. FM SYH .. FM SYF .. FM
20–40 mm1) 15–60 mm 20–60 mm1) – 20–50 mm
3/4–1 1/2in.1) in.1)
3/4–1 1/2 1–2 in. 3/4–1 1/2in.1)
YSA 2-2FK on
adapter sleeve SYJ .. KF
20– 35 mm1) 20–60 mm1) 20–60 mm – – 20–45 mm1)
3/4–1 1/4 in.1) in.1)
3/4–2 3/8 3/4–2 3/8in. in.1)
3/4–1 3/4
17262(00)
20–40 mm1) 17–60 mm1) 20–60 mm1) – – 20–50 mm1)
114
Y-bearing unit Y-bearing housings
Y-bearings SYFJ 5(00) P 40 – P 85
YAR 2-2F
SYFJ .. TF
20–50 mm 12–45 mm1)
3/4–1 3/4in.1) in.1)
1/2–1 3/4
YAR 2-2RF
20–50 mm1) 12–45 mm1)
in.1)
3/4–1 3/4 in.1)
3/4–1 3/4
YAR 2-2RF/HV 3
20–50 mm 20–40 mm1)
3/4–1 15/16
in. 3/4–1 1/2 in.1)
YAR 2-2RF/
VE495
20–50 mm 20–40 mm1)
YAT 2
20–50 mm1) 17–45 mm1)
in.1)
5/8–1 3/4
YEL 2-2F
20–50 mm1) 12–45 mm1)
in.1)
1/2–1 3/4
YEL 2-2RF/
VL065
20–40 mm1) 20–40 mm1)
YET 2
SYFJ .. FM
20–50 mm 15–45 mm1)
3/4–1 1/2in.1) in.1)
1/2–1 3/4
YSA 2-2FK on
adapter sleeve
12–45 mm1) 20–40 mm1)
in.1)
3/4–1 3/4 in.1)
3/4–1 1/2
17262(00)
20–50 mm1) 17–45 mm1)
115
Y-bearing plummer block Fig. 7
units with a pressed steel

housing
Y-bearing plummer block units († fig. 7) with
a pressed steel housing are designed for simple
applications with limited loads and speeds. The
two-part housing, which has no provision for
relubrication, is ordered separately from the
insert bearing. The individual items that make
up a Y-bearing unit are:
• the two-part housing

• the Y-bearing
• the rubber seating ring, if needed
The advantage of ordering individual compon-

ents is that a large number of combinations are Fig. 8
possible.
Rubber seating rings made of acrylonitrile-
butadiene rubber in the RIS 2 series († fig. 8)
are available for these Y-bearing plummer
blocks and are meant to reduce running noise
and dampen vibration. The rubber seating rings
also enable the bearings to be displaced slightly
in their housings, for example, to accommodate
shaft elongation.
Y-bearing units with a rubber seating ring are
also listed in the product tables. Detailed infor-
mation about rubber seating rings can be found
in the section Design of Y-bearing arrangements
on pages 45 and 46.
Data – general
• Housings in the SYJ series are in accordance
Dimensions with JIS B 1559-1995.
The boundary dimensions of most Y-bearing • Housings in the P series are in accordance
plummer block housings are in accordance with with ISO 3228:1993, except the centre height
the following standards: H1, which deviates slightly.
• Housings in the SY 5(00) M series are in
accordance with ISO 3228:1993. Y-bearing plummer block housings in the SYF,
• Housings in the SY 5(00) U series are in SYFJ and SYM series have not been standardized
accordance with ISO 3228:1993, except the either nationally or internationally, but are com-
centre height H1, which deviates for several mon in the marketplace.
housing sizes.
• Housings in the SYH series are in accordance
with ISO 3228:1993, except the centre height
H1, which is lower than the standard.
116
Tolerances Fig. 9
The tolerance for the shaft centre height H1

(† fig. 9) is
• ±0,25 mm for plummer block units with

a bearing bore diameter ≤ 40 mm, except for
units in the SYK series, where the tolerance is
+/– 0,31 mm
• ±0,30 mm for the larger plummer block units.
For Y-bearing plummer block units with com-

posite or cast housings, the outside diameter of H1
the bearing is matched to the diameter of the
housing bore so that the outer ring is prevented
from turning in its seat, but still able to compen- 3
sate for misalignment.
Additional information about tolerances for
the inner ring bore are listed in the section
Y-bearings on page 89. Load carrying ability of the housings
Housings made of composite material or grey
cast iron are able to withstand the same dynamic
Radial internal clearance and static loads as the Y-bearings they incorp-
The Y-bearing used in a Y-bearing plummer orate. These Y-bearing units can also be used in
block unit has the same radial internal clearance applications where shock loads or variable axial
as a similarly sized individual Y-bearing. loads occur.
Additional information about the radial inter- If SKF Y-bearing units are to be used in an
nal clearance can be found in the section application where health, safety, or the environ-
Y-bearings on page 90. ment is at risk, contact the SKF application engi-
neering service during the design phase.
Pressed steel housings have a lower load
Materials carrying capacity than their insert bearings.
Permissible radial loads are specified in the
Composite housings product tables. The axial load should not exceed
Y-housings in the SYK series are made of injection 20% of the permissible radial load.
moulded glass fibre reinforced polyamide 6. If the bearing arrangement will be subjected
A steel coil embedded in the housing adds to shock loads or variable axial loads, Y-bearing
greater stability to the form of the housing, units with a cast or Y-TECH housing should
even if operating temperatures are elevated. always be used.
The housing bolt holes are reinforced with
zinc-plated sheet steel inserts. The standard
housing colour is black.
Cast housings
Housings in the SY(J), SYH, SYM and SYF(J) series
are manufactured from grey cast iron
EN-GJL HB195 in accordance with
EN 1561:1997.
Pressed steel housings

Pressed steel housings in the P series are made
from cold-rolled sheet steel and are zinc-coated
for corrosion protection.
117
End covers Fig. 10
To protect the shaft ends and avoid contact to

rotating shaft ends, end covers are available for
composite and cast Y-bearing plummer block
units († fig. 10).
In the product tables, end covers in the ECY 2
series are shown together with the appropriate
bearing unit. The designation of the end cover
is listed together with the distance that the end
cover protrudes from the housing.
For additional information about end covers,
refer to the section Design of Y-bearing
arrangements on page 47.
Attaching to a support surface

Plummer block units have two bolt holes in
the housing base through which they can be
attached to their support surface with threaded Fig. 11
fasteners. The bolt holes vary for different hous-

ings. Housings made of:
• composite material have oblong bolt holes,

P
reinforced with zinc-coated sheet steel or 120
stainless steel inserts

• grey cast iron – SY(J), SYH and SYM series –
have cast oblong bolt holes
• grey cast iron – SYF and SYFJ series –
P 5 5
have threaded holes in the support base
• pressed steel have round bolt holes
If the loads acting on a housing are between

55° and 120° († fig. 11), Y-TECH bearing units
and SY(J), SYH and SYM plummer block units
should be doweled to the support surface or
stops should be provided in the direction of the
load. Mounting
Recommendations for the position and size The procedure for mounting a Y-bearing plummer
of the dowel pin holes for SY, SYJ and SYH series block unit depends on:
housings are provided in table 1.
• the design of the housing
• the method used to attach the unit to the shaft
Grease fills
With the exception of SKF Y-bearing units for These methods are described in detail in the
the food industry, all standard SKF Y-bearing section Mounting instructions, starting on
plummer block units are filled with a high- page 52.
quality, long-lasting grease containing a lithium-
calcium thickener that has a consistency of 2 on
the NLGI scale.
For additional information about lubricants
and lubrication, refer to the section Lubrication
and maintenance, starting on page 48.
118
Table 1
Position and size of dowel pin holes for Y-bearing plummer block housings made of grey cast iron
J7
N4
J 6
Housing Dimensions for housings in the

3
size SYJ series SY, SYH series
J6 J7 N4 J6 J7 N4
– mm
503 – – – 118 11,5 2

504 118 12,5 2 118 11,5 2
505 130 14 2 120 13 2
506 155 15 2 140 14 2

507 153 16 4 146 15,5 4
508 170 17,5 4 161 17 4
509 174 18 4 173 17 4

510 190 21 5 187 19 5
511 201 21 5 201 21 5
512 223 23,5 5 222 21 5

513 241 23 5 238 22,5 5
514 246 26 6 240 22,5 6
515 255 27 6 – – –
516 270 28 6 285 29 6

518 3 0 3 32 8 – – –
520 352 33,5 8 – – –
119
Y-TECH plummer block units with grub screws, metric shafts
d 20 – 40 mm
J
A1
N1
N
s1
d H
B
H 1
H2
A G
J
L
TF TR
Dimensions Basic load Fatigue Limiting Designation

ratings load speed Bearing unit
d A A1 B H H1 H2 J L N N1 G s1 C C0 Pu tolerance
h6
mm kN kN r/min –
20 32 21 31 64 33,3 16 96 126 17,5 12 10 18,3 12,7 6,55 0,28 8 500 SYK 20 TF

32 21 31 64 33,3 16 96 126 17,5 12 10 18,3 12,7 6,55 0,28 5 000 SYK 20 TR
25 32 22 34,1 70,5 36,5 16 105 134 17,5 12 10 19,8 14 7,8 0,335 7 000 SYK 25 TF
32 22 34,1 70,5 36,5 16 105 134 17,5 12 10 19,8 14 7,8 0,335 4 300 SYK 25 TR
30 40 25 38,1 82 42,9 19 121 159 21,5 14,5 12 22,2 19,5 11,2 0,475 6 300 SYK 30 TF
40 25 38,1 82 42,9 19 121 159 21,5 14,5 12 22,2 19,5 11,2 0,475 3 800 SYK 30 TR
35 45 27 42,9 93 47,6 19 126 164 21,5 14,5 12 25,4 25,5 15,3 0,655 5 300 SYK 35 TF
45 27 42,9 93 47,6 19 126 164 21,5 14,5 12 25,4 25,5 15,3 0,655 3 200 SYK 35 TR
40 48 30 49,2 99 49,2 19 136 176 21,5 14,5 12 30,2 30,7 19 0,8 4 800 SYK 40 TF
48 30 49,2 99 49,2 19 136 176 21,5 14,5 12 30,2 30,7 19 0,8 2 800 SYK 40 TR
120
A5
3.1
Designations Mass Appropriate end cover

Bearing unit Separate components Bearing Designation Dimension
Housing Bearing unit
A5
– kg – mm
SYK 20 TF SYK 504 YAR 204-2F 0,24 ECY 204 18,5

SYK 20 TR SYK 504 YAR 204-2RF 0,24 ECY 204 18,5
SYK 25 TF SYK 505 YAR 205-2F 0,29 ECY 205 18

SYK 25 TR SYK 505 YAR 205-2RF 0,29 ECY 205 18


SYK 40 TF SYK 508 YAR 208-2F 0,86 ECY 208 23,5

SYK 40 TR SYK 508 YAR 208-2RF 0,86 ECY 208 23,5
121
Y-bearing plummer block units with a cast housing and grub screws, metric shafts
d 12 – 60 mm
A1
N 1
s1 N
d H G
B
H 1
H2
A J
L
TF TR

h6
mm kN kN r/min –
12 32 18 27,4 57 30,2 14 97 127 20,5 11,5 10 15,9 9,56 4,75 0,2 9 500 SY 12 TF
15 32 18 27,4 57 30,2 14 97 127 20,5 11,5 10 15,9 9,56 4,75 0,2 9 500 SY 15 TF
17 32 18 27,4 57 30,2 14 97 127 20,5 11,5 10 15,9 9,56 4,75 0,2 9 500 SY 17 TF
20 32 21 31 65 33,3 14 97 127 20,5 11,5 10 18,3 12,7 6,55 0,28 8 500 SY 20 TF

34 23 31 65 33,3 14 97 127 20,7 13 10 18,3 12,7 6,55 0,28 8 500 SYJ 20 TF
32 21 31 65 33,3 14 97 127 20,5 11,5 10 18,3 12,7 6,55 0,28 5 000 SY 20 TR
25 36 22 34,1 70,5 36,5 16 102 130 19,5 11,5 10 19,8 14 7,8 0,335 7 000 SY 25 TF
38 24 34,1 70,5 36,5 16 102,5 140 21,5 13 10 19,8 14 7,8 0,335 7 000 SYJ 25 TF
36 22 34,1 70,5 36,5 16 102 130 19,5 11,5 10 19,8 14 7,8 0,335 4 300 SY 25 TR
30 40 25 38,1 82,5 42,9 17 117,5 152 23,5 14 12 22,2 19,5 11,2 0,475 6 300 SY 30 TF
42 27 38,1 82,5 42,9 16 118 165 24 17 14 22,2 19,5 11,2 0,475 6 300 SYJ 30 TF
40 25 38,1 82,5 42,9 17 117,5 152 23,5 14 12 22,2 19,5 11,2 0,475 3 800 SY 30 TR
35 45 27 42,9 93 47,6 19 126 160 21 14 12 25,4 25,5 15,3 0,655 5 300 SY 35 TF

46 28 42,9 93 47,6 17 129 167 24 17 14 25,4 25,5 15,3 0,655 5 300 SYJ 35 TF
45 27 42,9 93 47,6 19 126 160 21 14 12 25,4 25,5 15,3 0,655 3 200 SY 35 TR
40 48 30 49,2 99 49,2 19 135,5 175 24,5 14 12 30,2 30,7 19 0,8 4 800 SY 40 TF

49 31 49,2 99 49,2 18 136,5 184 25,5 17 14 30,2 30,7 19 0,8 4 800 SYJ 40 TF
48 30 49,2 99 49,2 19 135,5 175 24,5 14 12 30,2 30,7 19 0,8 2 800 SY 40 TR
45 48 32 49,2 107,5 54 21 143,5 187 22,5 14 12 30,2 33,2 21,6 0,915 4 300 SY 45 TF
52 36 49,2 107,5 54 20 143,5 190 23,5 17 14 30,2 33,2 21,6 0,915 4 300 SYJ 45 TF
48 32 49,2 107,5 54 21 143,5 187 22,5 14 12 30,2 33,2 21,6 0,915 2 400 SY 45 TR
50 54 34 51,6 114,5 57,2 22 157 203 26 18 16 32,6 35,1 23,2 0,98 4 000 SY 50 TF
58 38 51,6 114,5 57,2 22 157,5 206 26,5 20 16 32,6 35,1 23,2 0,98 4 000 SYJ 50 TF
54 34 51,6 114,5 57,2 22 157 203 26 18 16 32,6 35,1 23,2 0,98 2 200 SY 50 TR
55 60 40 55,6 126 63,5 24 171,5 219 27,5 18 16 33,4 43,6 29 1,25 3 600 SY 55 TF
60 40 55,6 126 63,5 24 171,5 219 27,5 20 16 33,4 43,6 29 1,25 3 600 SYJ 55 TF
60 40 55,6 126 63,5 24 171,5 219 27,5 18 16 33,4 43,6 29 1,25 1 900 SY 55 TR
60 60 42 65,1 138 69,8 26,5 190,5 240 29,5 18 16 39,7 52,7 36 1,53 3 400 SY 60 TF
65 47 65,1 138 69,8 26,5 188,5 241 29,5 20 16 39,7 52,7 36 1,53 3 400 SYJ 60 TF
60 42 65,1 138 69,8 26,5 190,5 240 29,5 18 16 39,7 52,7 36 1,53 1 800 SY 60 TR
122
A5
3.2

A5
– kg – mm
SY 12 TF SY 503 M YAR 203/12-2F 0,52 – –
SY 15 TF SY 503 M YAR 203/15-2F 0,51 – –
SY 17 TF SY 503 M YAR 203-2F 0,50 – –
SY 20 TF SY 504 M YAR 204-2F 0,57 ECY 204 18,5

SYJ 20 TF SYJ 504 YAR 204-2F 0,55 – –
SY 20 TR SY 504 M YAR 204-2RF 0,57 ECY 204 18,5
SY 25 TF SY 505 M YAR 205-2F 0,72 ECY 205 18

SYJ 25 TF SYJ 505 YAR 205-2F 0,73 – –
SY 25 TR SY 505 M YAR 205-2RF 0,72 ECY 205 18
SY 30 TF SY 506 M YAR 206-2F 1,10 ECY 206 20

SYJ 30 TF SYJ 506 YAR 206-2F 1,05 – –
SY 35 TF SY 507 M YAR 207-2F 1,45 ECY 207 22

SYJ 35 TF SYJ 507 YAR 207-2F 1,50 – –
SY 40 TF SY 508 M YAR 208-2F 1,80 ECY 208 23,5

SYJ 40 TF SYJ 508 YAR 208-2F 1,85 – –
SY 45 TF SY 509 M YAR 209-2F 2,20 ECY 209 23

SYJ 45 TF SYJ 509 YAR 209-2F 2,40 – –
SY 50 TF SY 510 M YAR 210-2F 2,70 ECY 210 29,5

SYJ 50 TF SYJ 510 YAR 210-2F 2,95 – –
SY 55 TF SY 511 M YAR 211-2F 3,60 ECY 211 34

SYJ 55 TF SYJ 511 YAR 211-2F 3,70 – –
SY 60 TF SY 512 M YAR 212-2F 4,45 ECY 212 35,5

SYJ 60 TF SYJ 512 YAR 212-2F 4,85 – –
123
Y-bearing plummer block units with a cast housing and grub screws, metric shafts
d 65 – 100 mm
A1
N1
s1 N
d H G
B
H1
H2
A J
L
TF

h6
mm kN kN r/min –
65 65 44 68,3 151 76,2 29 203 257 35 22 20 42,9 57,2 40 1,7 3 000 SY 65 TF

70 49 68,3 151 76,2 27 203 265 35 25 20 42,9 57,2 40 1,7 3 000 SYJ 65 TF
70 72 46 69,9 156 79,4 27 210 266 30 25 20 39,7 62,4 45 1,86 2 800 SYJ 70 TF
75 74 54 73,1 166 82,5 28 217 275 30 25 20 46,1 66,3 49 2,04 2 600 SYJ 75 TF
80 78 50 77,9 176 88,9 30 232 292 35 25 20 47,7 72,8 53 2,16 2 400 SYJ 80 TF
90 88 54 89 201 101,6 33 262 327 35 27 22 54 95,6 72 2,7 2 000 SYJ 90 TF
100 95 57 98,4 226 115 38 308 380 48 26 24 63,4 124 93 3,35 1 900 SYJ 100 TF
124
A
5
3.2

A5
– kg – mm
SY 65 TF SY 513 M YAR 213-2F 5,70 ECY 213 35,5

SYJ 65 TF SYJ 513 YAR 213-2F 6,15 – –
SYJ 70 TF SYJ 514 YAR 214-2F 6,20 – –
SYJ 75 TF SYJ 515 YAR 215-2F 7,30 – –
SYJ 80 TF SYJ 516 YAR 216-2F 9,70 – –
SYJ 90 TF SYJ 518 YAR 218-2F 14,0 – –
SYJ 100 TF SYJ 520 YAR 220-2F 19,0 – –
125
Y-bearing plummer block units with a cast housing and grub screws, inch shafts
d 1/2 – 1 3/16 in
A1
N1
s1 N
d H G
B
H1
H2
A J
L
TF TR
Dimensions Designation
Bearing unit
d A A1 B H H1 H2 J L N N1 G s1
in/mm –
1/2 1.26 0.71 1.08 2.21 1.19 0.55 3.82 5.00 0.81 0.45 3/8 0.63 SY 1/2 TF
12,7 32 18 27,4 56 30,2 14 97 127 20,5 11,5 10 15,9
1.26 0.71 1.08 2.09 1.06 0.43 3.82 5.00 0.81 0.45 3/8 0.63 SYH 1/2 TF
32 18 27,4 53 27 10,8 97 127 20,5 11,5 10 15,9
3/4 1.26 0.83 1.22 2.56 1.31 0.55 3.82 5.00 0.81 0.45 3/8 0.72 SY 3/4 TF
19,05 32 21 31 65 33,3 14 97 127 20,5 11,5 10 18,3
1.34 0.91 1.22 2.56 1.31 0.55 3.82 5.00 0.81 0.51 3/8 0.72 SYJ 3/4 TF
34 23 31 65 33,3 14 97 127 20,7 13 10 18,3
5/8 1.26 0.71 1.08 2.21 1.19 0.55 3.82 5.00 0.81 0.45 3/8 0.63 SY 5/8 TF
15,875 32 18 27,4 56 30,2 14 97 127 20,5 11,5 10 15,9
13/16 1.42 0.87 1.34 2.76 1.44 0.63 4.02 5.12 0.77 0.45 3/8 0.78 SY 13/16 TF
20,637 36 22 34,1 70 36,5 16 102 130 19,5 11,5 10 19,8
7/8 1.42 0.87 1.34 2.76 1.44 0.63 4.02 5.12 0.77 0.45 3/8 0.78 SY 7/8 TF
22,225 36 22 34,1 70 36,5 16 102 130 19,5 11,5 10 19,8
15/16 1.42 0.87 1.34 2.76 1.44 0.63 4.02 5.12 0.77 0.45 3/8 0.78 SY 15/16 TF
23,813 36 22 34,1 70 36,5 16 102 130 19,5 11,5 10 19,8
1 1.42 0.87 1.34 2.78 1.44 0.63 4.02 5.12 0.77 0.45 3/8 0.78 SY 1. TF
25,4 36 22 34,1 70,5 36,5 16 102 130 19,5 11,5 10 19,8
1.42 0.87 1.34 2.76 1.44 0.63 4.02 5.12 0.77 0.45 3/8 0.78 SY 1. TF/AH
36 22 34,1 70 36,5 16 102 130 19,5 11,5 10 19,8
1.50 0.94 1.34 2.78 1.44 0.63 4.02 5.51 0.85 0.51 1/2 0.78 SYJ 1. TF
38 24 34,1 70,5 36,5 16 102 140 21,5 13 12 19,8
1.42 0.87 1.34 2.78 1.44 0.63 4.02 5.12 0.77 0.45 3/8 0.78 SY 1. TR
36 22 34,1 70,5 36,5 16 102 130 19,5 11,5 10 19,8
1 1/16 1.57 0.98 1.50 3.23 1.69 0.65 4.63 5.98 0.93 0.55 1/2 0.87 SY 1.1/16 TF
26,988 40 25 38,1 82 42,9 16,5 117,5 152 23,5 14 12 22,2
1 1/ 8 1.57 0.98 1.50 3.23 1.94 0.65 4.63 5.98 0.93 0.55 1/2 0.87 SY 1.1/8 TF
28,575 40 25 38,1 82 49,2 16,5 117,5 152 23,5 14 12 22,2
1 3/16 1.57 0.98 1.50 3.23 1.69 0.65 4.63 5.98 0.93 0.55 1/2 0.87 SY 1.3/16 TF
30,163 40 25 38,1 82 42,9 16,5 117,5 152 23,5 14 12 22,2
1.57 0.98 1.50 3.23 1.69 0.65 4.63 5.98 0.93 0.55 1/2 0.87 SY 1.3/16 TF/AH
40 25 38,1 82 42,9 16,5 117,5 152 23,5 14 12 22,2
126
3.2
Designations Basic load Fatigue Limiting Mass

Bearing unit Separate components ratings load speed Bearing
Housing Bearing dynamic static limit with shaft unit
C C0 Pu tolerance
h6
– lbf/kN lbf/kN r/min lb/kg
SY 1/2 TF SY 503 U YAR 203-008-2F 2 150 1 070 50 9 500 1.21

9,56 4,75 0,2 0,55
SYH 1/2 TF SYH 503 U YAR 203-008-2F 2 150 1 070 50 9 500 1.21
9,56 4,75 0,2 0,55
SY 3/4 TF SY 504 M YAR 204-012-2F 2 860 1 470 60 8 500 1.23

12,7 6,55 0,28 0,56
SYJ 3/4 TF SYJ 504 YAR 204-012-2F 2 860 1 470 60 8 500 1.19
12,7 6,55 0,28 0,54
SY 5/8 TF SY 503 U YAR 203-010-2F 2 150 1 070 50 9 500 1.12

9,56 4,75 0,2 0,51
SY 13/16 TF SY 505 U YAR 205-013-2F 3 150 1 760 80 7 000 1.85

14 7,8 0,335 0,84
SY 7/8 TF SY 505 U YAR 205-014-2F 3 150 1 760 80 7 000 1.78

14 7,8 0,335 0,81
SY 15/16 TF SY 505 U YAR 205-015-2F 3 150 1 760 80 7 000 1.71

14 7,8 0,335 0,78
SY 1. TF SY 505 M YAR 205-100-2F 3 150 1 760 80 7 000 1.57

14 7,8 0,335 0,71
SY 1. TF/AH SY 505 U/AH YAR 205-100-2F/AH 3 150 1 760 80 7 000 1.59
14 7,8 0,335 0,72
SYJ 1. TF SYJ 505 YAR 205-100-2F 3 150 1 760 80 7 000 1.61
14 7,8 0,335 0,73
SY 1. TR SY 505 M YAR 205-100-2RF 3 150 1 760 80 4 300 1.59
14 7,8 0,335 0,72
SY 1.1/16 TF SY 506 U YAR 206-101-2F 4 390 2 520 110 6 300 2.65

19,5 11,2 0,475 1,20
SY 1.1/8 TF SY 506 U YAR 206-102-2F 4 390 2 520 110 6 300 2.60

19,5 11,2 0,475 1,20
SY 1.3/16 TF SY 506 U YAR 206-103-2F 4 390 2 520 110 6 300 2.60

19,5 11,2 0,475 1,20
SY 1.3/16 TF/AH SY 506 U/AH YAR 206-103-2F/AH 4 390 2 520 110 6 300 2.60
19,5 11,2 0,475 1,20
127
d 1 1/4 – 1 5/8 in
A1
N1
s1 N
d H G
B
H1
H2
A J
L
TF TR
Bearing unit
in/mm –
1 1/ 4 1.77 1.06 1.69 3.66 1.87 0.75 4.96 6.30 0.83 0.55 1/2 1.00 SY 1.1/4 TF
31,75 45 27 42,9 93 47,6 19 126 160 21 14 12 25,4
1.81 1.10 1.69 3.66 1.87 0.67 5.08 6.57 0.94 0.67 5/8 1.00 SYJ 1.1/4 TF
46 28 42,9 93 47,6 17 129 167 24 17 14 25,4
1.77 1.06 1.69 3.66 1.87 0.75 4.96 6.30 0.83 0.55 1/2 1.00 SY 1.1/4 TR
45 27 42,9 93 47,6 19 126 160 21 14 12 25,4
1 5/16 1.77 1.06 1.69 3.66 1.87 0.75 4.96 6.30 0.83 0.55 1/2 1.00 SY 1.5/16 TF
33,337 45 27 42,9 93 47,6 19 126 160 21 14 12 25,4
1 3/ 8 1.77 1.06 1.69 3.66 1.87 0.75 4.96 6.30 0.83 0.55 1/2 1.00 SY 1.3/8 TF
34,925 45 27 42,9 93 47,6 19 126 160 21 14 12 25,4
1 7/16 1.77 1.06 1.69 3.66 1.87 0.75 4.96 6.30 0.83 0.55 1/2 1.00 SY 1.7/16 TF
36,513 45 27 42,9 93 47,6 19 126 160 21 14 12 25,4
1.87 1.12 1.94 4.25 2.12 0.81 5.66 7.37 0.96 0.55 1/2 1.19 SYM 1.7/16 TF
47,6 28,6 49,2 108 54 20,6 143,7 187,5 24,5 14 12 30,2
1 1/ 2 1.89 1.18 1.94 3.90 1.94 0.75 5.33 6.89 0.96 0.55 1/2 1.19 SY 1.1/2 TF
38,1 48 30 49,2 99 49,2 19 135,5 175 24,5 14 12 30,2
1.89 1.18 1.94 3.90 1.94 0.75 5.33 6.89 0.96 0.55 1/2 1.19 SY 1.1/2 TF/AH
48 30 49,2 99 49,2 19 135,5 175 24,5 14 12 30,2
1.93 1.22 1.94 3.90 1.94 0.71 5.37 7.24 1.00 0.67 9/16 1.19 SYJ 1.1/2 TF
49 31 49,2 99 49,2 18 136,5 184 25,5 17 14 30,2
1.87 1.26 1.94 4.25 2.12 0.81 5.66 7.37 0.89 0.55 1/2 1.19 SYM 1.1/2 TF
47,6 32 49,2 108 54 20,6 143,7 187,5 22,7 14 12 30,2
1.89 1.18 1.94 3.90 1.94 0.75 5.33 6.89 0.96 0.55 1/2 1.19 SY 1.1/2 TR
48 30 49,2 99 49,2 19 135,5 175 24,5 14 12 30,2
1 9/16 1.89 1.18 1.94 3.90 1.94 0.75 5.33 6.89 0.96 0.55 1/2 1.19 SY 1.9/16 TF
39,688 48 30 49,2 99 49,2 19 135,5 175 24,5 14 12 30,2
1 5/ 8 1.90 1.26 1.94 4.22 2.12 0.81 5.66 7.36 0.89 0.55 1/2 1.19 SY 1.5/8 TF
41,275 48,3 32 49,2 107 54 20,6 143,7 187 22,7 14 12 30,2
128
3.2
.3

C C0 Pu tolerance
h6
SY 1.1/4 TF SY 507 M YAR 207-104-2F 5 740 3 440 150 5 300 3.35

25,5 15,3 0,655 1,50
SYJ 1.1/4 TF SYJ 507 YAR 207-104-2F 5 740 3 440 150 5 300 3.45
25,5 15,3 0,655 1,55
SY 1.1/4 TR SY 507 M YAR 207-104-2RF 5 740 3 440 150 3 200 3.35
25,5 15,3 0,655 1,50
SY 1.5/16 TF SY 507 U YAR 207-105-2F 5 740 3 440 150 5 300 3.65

25,5 15,3 0,655 1,65
SY 1.3/8 TF SY 507 U YAR 207-106-2F 5 740 3 440 150 5 300 3.35

25,5 15,3 0,655 1,50
SY 1.7/16 TF SY 507 U YAR 207-107-2F 5 740 3 440 150 5 300 3.50

25,5 15,3 0,655 1,60
SYM 1.7/16 TF SYM 508 U YAR 208-107-2F 6 910 4 280 180 4 800 5.35
30,7 19 0,8 2,40
SY 1.1/2 TF SY 508 M YAR 208-108-2F 6 910 4 280 180 4 800 4.10

30,7 19 0,8 1,85
30,7 19 0,8 1,80
SYJ 1.1/2 TF SYJ 508 YAR 208-108-2F 6 910 4 280 180 4 800 4.20
30,7 19 0,8 1,90
SYM 1.1/2 TF SYM 509 U YAR 209-108-2F 7 470 4 860 210 4 300 2.50
33,2 21,6 0,915 2,55
SY 1.1/2 TR SY 508 M YAR 208-108-2RF 6 910 4 280 180 2 800 4.10
30,7 19 0,8 1,85
SY 1.9/16 TF SY 508 U YAR 208-109-2F 6 910 4 280 180 4 300 4.25

30,7 19 0,8 1,95
SY 1.5/8 TF SY 509 U YAR 209-110-2F 7 470 4 860 210 4 300 5.45

33,2 21,6 0,915 2,45
129
d 1 11/16 – 2 1/4 in
A1
N1
s1 N
d H G
B
H1
H2
A J
L
TF
Bearing unit
in/mm –
1 11/16 1.90 1.26 1.94 4.22 2.12 0.81 5.66 7.36 0.89 0.55 1/2 1.19 SY 1.11/16 TF
42,862 48,3 32 49,2 107 54 20,6 143,7 187 22,7 14 12 30,2
1.90 1.26 1.94 4.22 2.12 0.81 5.66 7.36 0.89 0.55 1/2 1.19 SY 1.11/16 TF/AH
48,3 32 49,2 107 54 20,6 143,7 187 22,7 14 12 30,2
2.12 1.38 2.03 4.50 2.25 0.87 6.19 7.99 1.02 0.71 5/8 1.28 SYM 1.11/16 TF
54 35 51,6 114,5 57,2 22,2 157,2 203 26 18 16 32,6
1 3/ 4 1.89 1.26 1.94 4.23 2.13 0.83 5.65 7.36 0.89 0.55 1/2 1.19 SY 1.3/4 TF
44,45 48 32 49,2 107,5 54 21 143,5 187 22,5 14 12 30,2
2.05 1.42 1.94 4.23 2.13 0.79 5.65 7.48 0.93 0.67 9/16 1.19 SYJ 1.3/4 TF
52 36 49,2 107,5 54 20 143,5 190 23,5 17 14 30,2
2.13 1.34 2.03 4.49 2.25 0.87 6.18 7.99 1.02 0.71 5/8 1.28 SYM 1.3/4 TF
54 34 51,6 114 57,2 22 157 203 26 18 16 32,6
1 15/16 2.13 1.34 2.03 4.49 2.25 0.87 6.18 7.99 1.02 0.71 5/8 1.28 SY 1.15/16 TF
49,212 54 34 51,6 114 57,2 22 157 203 26 18 16 32,6
2.13 1.34 2.03 4.49 2.25 0.87 6.18 7.99 1.02 0.71 5/8 1.28 SY 1.15/16 TF/AH
54 34 51,6 114 57,2 22 157 203 26 18 16 32,6
2.13 1.34 2.03 4.46 2.19 0.84 6.18 7.99 1.02 0.71 5/8 1.28 SYH 1.15/16 TF
54 34 51,6 113,5 55,6 21,4 157 203 26 18 16 32,6
2.38 1.57 2.19 5.00 2.50 0.94 6.75 8.62 1.08 0.71 5/8 1.31 SYM 1.15/16 TF
60,4 40 55,6 127 63,5 23,8 171,5 219 27,5 18 16 33,4
2 2.36 1.57 2.19 4.96 2.50 0.94 6.75 8.62 1.08 0.71 5/8 1.31 SY 2. TF
50,8 60 40 55,6 126 63,5 24 171,5 219 27,5 18 16 33,4
2.36 1.57 2.19 4.96 2.50 0.94 6.75 8.62 1.08 0.79 5/8 1.31 SYJ 2. TF
60 40 55,6 126 63,5 24 171,5 219 27,5 20 16 33,4
2.38 1.57 2.19 5.00 2.50 0.94 6.75 8.62 1.08 0.71 5/8 1.31 SY 2. TF/AH
60,4 40 55,6 127 63,5 23,8 171,5 219 27,5 18 16 33,4
2 3/16 2.38 1.57 2.19 5.00 2.50 0.94 6.75 8.62 1.08 0.71 5/8 1.31 SY 2.3/16 TF
55,563 60,4 40 55,6 127 63,5 23,8 171,5 219 27,5 18 16 33,4
2.38 1.57 2.19 5.00 2.50 0.94 6.75 8.62 1.08 0.71 5/8 1.31 SY 2.3/16 TF/AH
60,4 40 55,6 127 63,5 23,8 171,5 219 27,5 18 16 33,4
2.36 1.65 2.56 5.50 2.75 1.02 7.50 9.45 1.16 0.71 5/8 1.56 SYM 2.3/16 TF
60 42 65,1 139,5 69,9 26 190,5 240 29,5 18 16 39,7
2 1/ 4 2.36 1.65 2.56 5.50 2.75 1.02 7.50 9.45 1.16 0.71 5/8 1.56 SY 2.1/4 TF
57,15 60 42 65,1 139,5 69,9 26 190,5 240 29,5 18 16 39,7
2.36 1.65 2.56 5.44 2.69 1.00 7.50 9.45 1.16 0.71 5/8 1.56 SYH 2.1/4 TF
60 42 65,1 138 68,3 25,4 190,5 240 29,5 18 16 39,7
130
3.2
.3

C C0 Pu tolerance
h6
SY 1.11/16 TF SY 509 U YAR 209-111-2F 7 470 4 860 210 4 300 5.30

33,2 21,6 0,915 2,40
33,2 21,6 0,915 2,40
SYM 1.11/16 TF SYM 510 U YAR 210-111-2F 7 900 5 220 220 4 000 6.60
35,1 23,2 0,98 3,00
SY 1.3/4 TF SY 509 M YAR 209-112-2F 7 470 4 860 210 4 300 4.85

33,2 21,6 0,915 2,20
SYJ 1.3/4 TF SYJ 509 YAR 209-112-2F 7 470 4 860 210 4 300 5.30
33,2 21,6 0,915 2,40
SYM 1.3/4 TF SY 510 U YAR 210-112-2F 7 900 5 220 220 4 000 6.75
35,1 23,2 0,98 3,05
SY 1.15/16 TF SY 510 U YAR 210-115-2F 7 900 5 220 220 4 000 6.30

35,1 23,2 0,98 2,85
35,1 23,2 0,98 2,85
SYH 1.15/16 TF SYH 510 U YAR 210-115-2F 7 900 5 220 220 4 000 6.45
35,1 23,2 0,98 2,90
SYM 1.15/16 TF SY 511 U YAR 211-115-2F 9 810 6 530 280 3 600 8.80
43,6 29 1,25 4,00
SY 2. TF SY 511 M YAR 211-200-2F 9 810 6 530 280 3 600 8.25

43,6 29 1,25 3,75
SYJ 2. TF SYJ 511 YAR 211-200-2F 9 810 6 530 280 3 600 8.50
43,6 29 1,25 3,85
SY 2. TF/AH SY 511 U/AH YAR 211-200-2F/AH 9 810 6 530 280 3 600 8.80
43,6 29 1,25 4,00
SY 2.3/16 TF SY 511 U YAR 211-203-2F 9 810 6 530 280 3 600 7.95

43,6 29 1,25 3,60
43,6 29 1,25 3,80
SYM 2.3/16 TF SY 512 U YAR 212-203-2F 11 860 8 100 340 3 400 12.0
52,7 36 1,53 5,45
SY 2.1/4 TF SY 512 U YAR 212-204-2F 11 860 8 100 340 3 400 12.0

52,7 36 1,53 5,45
SYH 2.1/4 TF SYH 512 U YAR 212-204-2F 11 860 8 100 340 3 400 10.4
52,7 36 1,53 4,70
131
d 2 7/16 – 3 in
A1
N1
s1 N
d H G
B
H1
H2
A J
L
TF
Bearing unit
in/mm –
2 7/16 2.36 1.65 2.56 5.50 2.75 1.02 7.50 9.45 1.16 0.71 5/8 1.56 SY 2.7/16 TF
61,913 60 42 65,1 139,5 69,9 26 190,5 240 29,5 18 16 39,7
2.36 1.65 2.56 5.44 2.69 1.00 7.50 9.45 1.16 0.71 5/8 1.56 SYH 2.7/16 TF
60 42 65,1 138 68,3 25,4 190,5 240 29,5 18 16 39,7
2.56 1.73 2.75 6.04 3.00 1.50 8.00 10.24 1.16 0.87 3/4 1.56 SYM 2.7/16 TF
65 44 69,9 153,5 76,2 38,1 203,2 260 29,5 22 20 39,7
2 1/ 2 2.56 1.73 2.69 5.94 3.00 1.14 7.99 10.12 1.38 0.87 3/4 1.69 SY 2.1/2 TF
63,5 65 44 68,3 151 76,2 29 203 257 35 22 20 42,9
2.76 1.93 2.69 5.94 3.00 1.06 7.99 10.43 1.38 0.98 3/4 1.69 SYJ 2.1/2 TF
70 49 68,3 151 76,2 27 203 265 35 25 20 42,9
2.56 1.73 2.75 6.04 3.00 1.54 8.00 10.24 1.16 0.87 3/4 1.56 SYM 2.1/2 TF
65 44 69,9 153,5 76,2 39,1 203,2 260 29,5 22 20 39,7
2 11/16 2.56 1.73 2.69 5.87 3.00 1.14 7.99 10.12 1.38 0.87 3/4 1.69 SY 2.11/16 TF
68,263 65 44 68,3 149 76,2 29 203 257 35 22 20 42,9
3.00 1.89 2.88 6.97 3.50 1.86 9.00 12 1.38 0.88 3/4 1.81 SYM 2.11/16 TF
76,2 48 73,1 177 88,9 47,2 228,6 305 35 22,2 20 46,1
2 3/ 4 2.82 1.89 2.88 6.54 3.25 1.29 8.50 10.98 1.38 0.88 3/4 1.81 SY 2.3/4 TF
69,85 71,6 48 73,1 166 82,6 32,8 215,9 279 35 22,2 20 46,1
2 15/16 2.82 1.89 3.07 6.54 3.25 1.29 8.50 10.98 1.38 0.88 3/4 1.81 SY 2.15/16 TF
74,613 71,6 48 77,9 166 82,6 32,8 215,9 279 35 22,2 20 46,1
3.07 2.05 3.07 6.97 3.50 1.87 9.00 12 1.38 0.88 3/4 1.88 SYM 2.15/16 TF
78 52 77,9 177 88,9 47,6 228,6 305 35 22,2 20 47,7
3 3.07 2.05 3.07 6.97 3.50 1.87 9.00 12 1.38 0.88 3/4 1.88 SYM 3. TF
76,2 78 52 77,9 177 88,9 47,6 228,6 305 35 22,2 20 47,7
132
3.2
.3

C C0 Pu tolerance
h6
SY 2.7/16 TF SY 512 U YAR 212-207-2F 11 860 8 100 340 3 400 10.0

52,7 36 1,53 4,55
SYH 2.7/16 TF SYH 512 U YAR 212-207-2F 11 860 8 100 340 3 400 10.3
52,7 36 1,53 4,65
SYM 2.7/16 TF SY 514 U YAR 214-207-2F 14 040 9 900 420 2 800 16.0
62,4 44 1,86 7,25
SY 2.1/2 TF SY 513 M YAR 213-208-2F 12 870 9 000 380 3 000 12.8

57,2 40 1,7 5,80
SYJ 2.1/2 TF SYJ 513 YAR 213-208-2F 12 870 9 000 380 3 000 13.8
57,2 40 1,7 6,25
SYM 2.1/2 TF SY 514 U YAR 214-208-2F 14 040 9 900 420 2 800 15.4
62,4 44 1,86 7,00
SY 2.11/16 TF SY 513 U YAR 213-211-2F 12 870 9 000 380 3 000 12.5

57,2 40 1,7 5,70
SYM 2.11/16 TF SYM 515 U YAR 215-211-2F 14 920 11 030 460 2 600 23.8
66,3 49 2,04 10,8
SY 2.3/4 TF SY 515 U YAR 215-212-2F 14 920 11 030 460 2 600 17.7

66,3 49 2,04 8,00
SY 2.15/16 TF SY 515 U YAR 215-215-2F 16 380 11 930 460 2 400 16.6

72,8 53 2,04 7,55
SYM 2.15/16 TF SY 516 U YAR 216-215-2F 16 380 11 930 490 2 400 22.8
72,8 53 2,16 10,3
SYM 3. TF SY 516 U YAR 216-300-2F 16 380 11 930 490 2 400 22.4

72,8 53 2,16 10,2
133
Y-bearing plummer block units with a cast housing and an eccentric locking collar,
metric shafts
d 15 – 60 mm
J
A1
N1
s1 N
d H G
B1
H1
H2
A J
L
FM WF

ratings load speed Bearing
dynamic static limit with shaft unit
d A A 1 B1 H H1 H2 J L N N1 G s1 C C0 Pu tolerance
h6
mm kN kN r/min –
15 32 18 28,6 57 30,2 14 97 127 20,5 11,5 10 22,1 9,56 4,75 0,2 9 500 SY 15 FM
17 32 18 28,6 57 30,2 14 97 127 20,5 11,5 10 22,1 9,56 4,75 0,2 9 500 SY 17 FM
20 32 21 31 65 33,3 14 97 127 20,5 11,5 10 23,5 12,7 6,55 0,28 8 500 SY 20 FM

32 21 43,7 65 33,3 14 97 127 20,5 11,5 10 26,6 12,7 6,55 0,28 8 500 SY 20 WF
25 36 22 31 70,5 36,5 16 102 130 19,5 11,5 10 23,5 14 7,8 0,335 7 000 SY 25 FM
36 22 44,4 70,5 36,5 16 102 130 19,5 11,5 10 26,9 14 7,8 0,335 7 000 SY 25 WF
30 40 25 35,7 82,5 42,9 17 117,5 152 23,5 14 12 26,7 19,5 11,2 0,475 6 300 SY 30 FM
40 25 48,4 82,5 42,9 17 117,5 152 23,5 14 12 30,1 19,5 11,2 0,475 6 300 SY 30 WF
35 45 27 38,9 93 47,6 19 126 160 21 14 12 29,4 25,5 15,3 0,655 5 300 SY 35 FM

45 27 51,1 93 47,6 19 126 160 21 14 12 32,3 25,5 15,3 0,655 5 300 SY 35 WF
40 48 30 43,7 99 49,2 19 135,5 175 24,5 14 12 32,7 30,7 19 0,8 4 800 SY 40 FM

48 30 56,3 99 49,2 19 135,5 175 24,5 14 12 34,9 30,7 19 0,8 4 800 SY 40 WF
45 48 32 43,7 107,5 54 21 143,5 187 22,5 14 12 32,7 33,2 21,6 0,915 4 300 SY 45 FM
48 32 56,3 107,5 54 21 143,5 187 22,5 14 12 34,9 33,2 21,6 0,915 4 300 SY 45 WF
50 54 34 43,7 114,5 57,2 22 157 203 26 18 16 32,7 35,1 23,2 0,98 4 000 SY 50 FM
54 34 62,7 114,5 57,2 22 157 203 26 18 16 38,1 35,1 23,2 0,98 4 000 SY 50 WF
55 60 40 48,4 126 63,5 24 171,5 219 27,5 18 16 36,4 43,6 29 1,25 3 600 SY 55 FM
60 40 71,4 126 63,5 24 171,5 219 27,5 18 16 43,6 43,6 29 1,25 3 600 SY 55 WF
60 60 42 53,1 138 69,9 26,5 190,5 240 29,5 18 16 39,6 52,7 36 1,53 3 400 SY 60 FM
60 42 77,8 138 69,9 26,5 190,5 240 29,5 18 16 46,8 52,7 36 1,53 3 400 SY 60 WF
134
A5
3.3

A5
– kg – mm
SY 15 FM SY 503 M YET 203/15 0,53 – –
SY 17 FM SY 503 M YET 203 0,52 – –
SY 20 FM SY 504 M YET 204 0,59 ECY 204 18,5

SY 20 WF SY 504 M YEL 204-2F 0,62 ECY 204 18,5
SY 25 FM SY 505 M YET 205 0,73 ECY 205 18

SY 25 WF SY 505 M YEL 205-2F 0,78 ECY 205 18
SY 30 FM SY 506 M YET 206 1,10 ECY 206 20

SY 30 WF SY 506 M YEL 206-2F 1,20 ECY 206 20
SY 35 FM SY 507 M YET 207 1,55 ECY 207 22

SY 35 WF SY 507 M YEL 207-2F 1,60 ECY 207 22
SY 40 FM SY 508 M YET 208 1,85 ECY 208 23,5

SY 40 WF SY 508 M YEL 208-2F 1,95 ECY 208 23,5
SY 45 FM SY 509 M YET 209 2,25 ECY 209 23

SY 45 WF SY 509 M YEL 209-2F 2,35 ECY 209 23
SY 50 FM SY 510 M YET 210 2,75 ECY 210 29,5

SY 50 WF SY 510 M YEL 210-2F 2,90 ECY 210 29,5
SY 55 FM SY 511 M YET 211 3,65 ECY 211 34

SY 55 WF SY 511 M YEL 211-2F 3,90 ECY 211 34
SY 60 FM SY 512 M YET 212 4,45 ECY 212 35,5

SY 60 WF SY 512 M YEL 212-2F 4,75 ECY 212 35,5
135
inch shafts
d 1/2 – 1 5/16 in
J
A1
N1
s1 N
d H G
B1
H1
H2
A J
L
FM WF
Bearing
unit
d A A1 B1 H H1 H2 J L N N1 G s1
in/mm –
1/2 1.26 0.71 1.13 2.21 1.19 0.55 3.82 5.00 0.81 0.45 3/8 0.87 SY 1/2 FM
12,7 32 18 28,6 56 30,2 14 97 127 20,5 11,5 10 22,1
3/4 1.26 0.83 1.22 2.52 1.31 0.55 3.82 5.00 0.81 0.45 3/8 0.94 SY 3/4 FM
19,05 32 21 31 64 33,3 14 97 127 20,5 11,5 10 24
1.26 0.83 1.72 2.46 1.25 0.49 3.82 5.00 0.81 0.45 3/8 1.05 SYH 3/4 WF
32 21 43,7 62,5 31,8 12,5 97 127 20,5 11,5 10 26,6
15/16 1.42 0.87 1.22 2.76 1.44 0.63 4.02 5.12 0.77 0.45 3/8 0.93 SY 15/16 FM
23,813 36 22 31 70 36,5 16 102 130 19,5 11,5 10 23,5
1 1.42 0.87 1.22 2.63 1.31 0.51 4.02 5.12 0.77 0.45 3/8 0.93 SYH 1. FM
25,4 36 22 31 67 33,4 12,9 102 130 19,5 11,5 10 23,5
1.42 0.87 1,75 2.63 1.31 0.51 4.02 5.12 0.77 0.45 3/8 1.06 SYH 1. WF
36 22 44,4 67 33,4 12,9 102 130 19,5 11,5 10 26,9
1 1/ 8 1.57 0.98 1.41 3.23 1.69 0.65 4.63 5.98 0.93 0.55 1/2 1.05 SY 1.1/8 FM
28,575 40 25 35,7 82 42,9 16,5 117,5 152 23,5 14 12 26,7
1.57 0.98 1.91 3.14 1.56 0.58 4.63 5.98 0.93 0.55 1/2 1.19 SYH 1.1/8 WF
40 25 48,4 80 39,7 14,8 117,5 152 23,5 14 12 30,1
1 3/16 1.57 0.98 1.41 3.23 1.69 0.65 4.63 5.98 0.93 0.55 1/2 1.05 SY 1.3/16 FM
30,163 40 25 35,7 82 42,9 16,5 117,5 152 23,5 14 12 26,7
1.57 0.98 1.41 3.14 1.56 0.58 4.63 5.98 0.93 0.55 1/2 1.05 SYH 1.3/16 FM
40 25 35,7 80 39,7 14,8 117,5 152 23,5 14 12 26,7
1.57 0.98 1.91 3.14 1.56 0.58 4.63 5.98 0.93 0.55 1/2 1.19 SYH 1.3/16 WF
40 25 48,4 80 39,7 14,8 117,5 152 23,5 14 12 30,1
1 1/ 4 1.77 1.06 1.53 3.66 1.87 0.75 4.96 6.30 0.83 0.55 1/2 1.16 SY 1.1/4 FM
31,75 45 27 38,9 93 47,6 19 126 160 21 14 12 29,4
1.77 1.06 1.53 3.60 1.81 0.69 4.96 6.30 0.83 0.55 1/2 1.16 SYH 1.1/4 FM
45 27 38,9 91,5 46,1 17,5 126 160 21 14 12 29,4
1.77 1.06 2.01 3.60 1.81 0.69 4.96 6.30 0.83 0.55 1/2 1.27 SYH 1.1/4 WF
45 27 51,1 91,5 46,1 17,5 126 160 21 14 12 32,3
1 5/16 1.77 1.06 1.53 3.66 1.87 0.75 4.96 6.30 0.83 0.55 1/2 1.16 SY 1.5/16 FM
33,338 45 27 38,9 93 47,6 19 126 160 21 14 12 29,4
136
3.3

C C0 Pu tolerance
h6
SY 1/2 FM SY 503 U YET 203-008 2 150 1 070 50 9 500 1.32

9,56 4,75 0,2 0,60
SY 3/4 FM SY 504 U YET 204-012 2 860 1 470 60 8 500 1.37

12,7 6,55 0,28 0,62
SYH 3/4 WF SYH 504 U YEL 204-012-2F 2 860 1 470 60 8 500 1.45
12,7 6,55 0,28 0,66
SY 15/16 FM SY 505 U YET 205-015 3 150 1 760 80 7 000 1.65

14 7,8 0,335 0,75
SYH 1. FM SYH 505 U YET 205-100 3 150 1 760 80 7 000 1.63

14 7,8 0,335 0,74
SYH 1. WF SYH 505 U YEL 205-100-2F 3 150 1 760 80 7 000 1.73
14 7,8 0,335 0,79
SY 1.1/8 FM SY 506 U YET 206-102 4 390 2 520 110 6 300 2.45

19,5 11,2 0,475 1,10
SYH 1.1/8 WF SYH 506 U YEL 206-102-2F 4 390 2 520 110 6 300 3.20
19,5 11,2 0,475 1,45
SY 1.3/16 FM SY 506 U YET 206-103 4 390 2 520 110 6 300 2.45

19,5 11,2 0,475 1,10
SYH 1.3/16 FM SYH 506 U YET 206-103 4 390 2 520 110 6 300 2.55
19,5 11,2 0,475 1,15
SYH 1.3/16 WF SYH 506 U YEL 206-103-2F 4 390 2 520 110 6 300 2.65
19,5 11,2 0,475 1,20
SY 1.1/4 FM SY 507 U YET 207-104 5 740 3 440 150 5 300 3.75

25,5 15,3 0,655 1,70
SYH 1.1/4 FM SYH 507 U YET 207-104 5 740 3 440 150 5 300 3.55
25,5 15,3 0,655 1,60
SYH 1.1/4 WF SYH 507 U YEL 207-104-2F 5 740 3 440 150 5 300 4.10
25,5 15,3 0,655 1,85
SY 1.5/16 FM SY 507 U YET 207-105 5 740 3 440 150 5 300 3.65

25,5 15,3 0,655 1,65
137
inch shafts
d 1 3/8 – 2 in
J
A1
N1
s1 N
d H
B1 G
H1
H2
A J
L
FM WF
Bearing
unit
in/mm –
1 3/ 8 1.77 1.06 1.53 3.66 1.87 0.75 4.96 6.30 0.83 0.55 1/2 1.16 SY 1.3/8 FM
34,925 45 27 38,9 93 47,6 19 126 160 21 14 12 29,4
1.77 1.06 2.01 3.60 1.81 0.69 4.96 6.30 0.83 0.55 1/2 1.27 SYH 1.3/8 WF
45 27 51,1 91,5 46,1 17,5 126 160 21 14 12 32,3
1 7/16 1.77 1.06 1.53 3.66 1.87 0.75 4.96 6.30 0.83 0.55 1/2 1.16 SY 1.7/16 FM
36,513 45 27 38,9 93 47,6 19 126 160 21 14 12 29,4
1.77 1.06 2.01 3.66 1.87 0.75 4.96 6.30 0.83 0.55 1/2 1.27 SY 1.7/16 WF
45 27 51,1 93 47,6 19 126 160 21 14 12 32,3
1.77 1.06 1.53 3.60 1.81 0.69 4.96 6.30 0.83 0.55 1/2 1.16 SYH 1.7/16 FM
45 27 38,9 91,5 46,1 17,5 126 160 21 14 12 29,4
1.77 1.06 2.01 3.60 1.81 0.69 4.96 6.30 0.83 0.55 1/2 1.27 SYH 1.7/16 WF
45 27 51,1 91,5 46,1 17,5 126 160 21 14 12 32,3
1 1/ 2 1.89 1.18 1.72 3.90 1.94 0.75 5.33 6.89 0.96 0.55 1/2 1.31 SY 1.1/2 FM
38,1 48 30 43,7 99 49,2 19 135,5 175 24,5 14 12 33,2
1.89 1.18 2.22 3.90 1.94 0.75 5.33 6.89 0.96 0.55 1/2 1.37 SYH 1.1/2 WF
48 30 56,3 99 49,2 19 135,5 175 24,5 14 12 34,9
1 11/16 1.90 1.26 1.72 4.22 2.12 0.81 5.66 7.36 0.89 0.55 1/2 1.29 SY 1.11/16 FM
42,863 48,3 32 43,7 107 54 20,6 143,7 187 22,7 14 12 32,7
1.90 1.26 2.22 4.16 2.06 0.79 5.66 7.36 0.89 0.55 1/2 1.37 SYH 1.11/16 WF
48,3 32 56,3 105,5 52,4 20 143,7 187 22,7 14 12 34,9
1 3/ 4 1.90 1.26 1.72 4.22 2.12 0.81 5.66 7.36 0.89 0.55 1/2 1.29 SY 1.3/4 FM
44,45 48,3 32 43,7 107 54 20,6 143,7 187 22,7 14 12 32,7
1.90 1.26 2.22 4.16 2.06 0.79 5.66 7.36 0.89 0.55 1/2 1.37 SYH 1.3/4 WF
48,3 32 56,3 105,5 52,4 20 143,7 187 22,7 14 12 34,9
1 15/16 2.13 1.34 1.72 4.49 2.25 0.87 6.18 7.99 1.02 0.71 5/8 1.29 SY 1.15/16 FM
49,213 54 34 43,7 114 57,2 22 157 203 26 18 16 32,7
2.13 1.34 2.47 4.49 2.25 0.87 6.18 7.99 1.02 0.71 5/8 1.50 SY 1.15/16 WF
54 34 62,7 114 57,2 22 157 203 26 18 16 38,1
2.13 1.34 2.47 4.46 2.19 0.84 6.18 7.99 1.02 0.71 5/8 1.50 SYH 1.15/16 WF
54 34 62,7 113,5 55,6 21,4 157 203 26 18 16 38,1
2 2.38 1.57 1.91 5.00 2.50 0.94 6.75 8.63 1.08 0.71 5/8 1.41 SY 2. FM
50,8 60,4 40 48,4 127 63,5 23,8 171,5 219 27,5 18 16 35,9
2.38 1.57 1.91 4.98 2.44 0.92 6.75 8.63 1.08 0.71 5/8 1.41 SYH 2. FM
60,4 40 48,4 126,5 61,9 23,3 171,5 219 27,5 18 16 35,9
2.38 1.57 2.81 4.98 2.44 0.92 6.75 8.63 1.08 0.71 5/8 1.72 SYH 2. WF
60,4 40 71,4 126,5 61,9 23,3 171,5 219 27,5 18 16 43,6
138
3.3

C C0 Pu tolerance
h6
SY 1.3/8 FM SY 507 U YET 207-106 5 740 3 440 150 5 300 3.65

25,5 15,3 0,655 1,65
SYH 1.3/8 WF SYH 507 U YEL 207-106-2F 5 740 3 440 150 5 300 3.95
25,5 15,3 0,655 1,80
SY 1.7/16 FM SY 507 U YET 207-107 5 740 3 440 150 5 300 3.60

25,5 15,3 0,655 1,63
SY 1.7/16 WF SY 507 U YEL 207-107-2F 5 740 3 440 150 5 300 3.75
25,5 15,3 0,655 1,70
SYH 1.7/16 FM SYH 507 U YET 207-107 5 740 3 440 150 5 300 3.40
25,5 15,3 0,655 1,55
SYH 1.7/16 WF SYH 507 U YEL 207-107-2F 5 740 3 440 150 5 300 3.65
25,5 15,3 0,655 1,65
SY 1.1/2 FM SY 508 U YET 208-108 6 910 4 280 180 4 800 3.95

30,7 19 0,8 1,80
SYH 1.1/2 WF SYH 508 U YEL 208-108-2F 6 910 4 280 180 4 800 4.50
30,7 19 0,8 2,05
SY 1.11/16 FM SY 509 U YET 209-111 7 470 4 860 210 4 300 5.05

33,2 21,6 0,915 2,30
SYH 1.11/16 WF SYH 509 U YEL 209-111-2F 7 470 4 860 210 4 300 5.85
33,2 21,6 0,915 2,65
SY 1.3/4 FM SY 509 U YET 209-112 7 470 4 860 210 4 300 4.95

33,2 21,6 0,915 2,25
SYH 1.3/4 WF SYH 509 U YEL 209-112-2F 7 470 4 860 210 4 300 5.30
33,2 21,6 0,915 2,40
SY 1.15/16 FM SY 510 U YET 210-115 7 900 5 220 220 4 000 6.05

35,1 23,2 0,98 2,75
SY 1.15/16 WF SY 510 U YEL 210-115-2F 7 900 5 220 220 4 000 6.50
35,1 23,2 0,98 2,95
SYH 1.15/16 WF SYH 510 U YEL 210-115-2F 7 900 5 220 220 4 000 6.50
35,1 23,2 0,98 2,95
SY 2. FM SY 511 U YET 211-200 9 810 6 530 280 3 600 8.40

43,6 29 1,25 3,80
SYH 2. FM SYH 511 U YET 211-200 9 810 6 530 280 3 600 8.80
43,6 29 1,25 4,00
SYH 2. WF SYH 511 U YEL 211-200-2F 9 810 6 530 280 3 600 9.25
43,6 29 1,25 4,20
139
inch shafts
d 2 3/16 – 2 7/16 in
J
A1
N1
s1 N
d H G
B1
H1
H2
A J
L
FM WF
Bearing
unit
in/mm –
2 3/16 2.38 1.57 1.91 5.00 2.50 0.94 6.75 8.63 1.08 0.71 5/8 1.41 SY 2.3/16 FM
55,563 60,4 40 48,4 127 63,5 23,8 171,5 219 27,5 18 16 35,9
2.38 1.57 2.81 4.98 2.44 0.92 6.75 8.63 1.08 0.71 5/8 1.72 SYH 2.3/16 WF
60,4 40 71,4 126,5 61,9 23,3 171,5 219 27,5 18 16 43,6
2 7/16 2.36 1.65 3.06 5.50 2.75 1.02 7.50 9.45 1.15 0.71 5/8 1.84 SYH 2.7/16 WF
61,913 60 42 77,8 139,5 69,9 26 190,5 240 29,1 18 16 46,7
140
3.3

C C0 Pu tolerance
h6
SY 2.3/16 FM SY 511 U YET 211-203 9 810 6 530 280 3 600 8.05

43,6 29 1,25 3,65
SYH 2.3/16 WF SYH 511 U YEL 211-203-2F 9 810 6 530 280 3 600 8.70
43,6 29 1,25 3,95
SYH 2.7/16 WF SYH 512 U YEL 212-207-2F 11 860 8 100 340 3 400 10.8
52,7 36 1,53 4,90
141
Y-bearing plummer block units with a cast housing and an adapter sleeve, metric shafts
d 20 – 60 mm
A1
N1
s1 N
d H G
B1
H1
H2
A J
L
Dimensions Basic load Fatigue Designations1)

ratings load Bearing Adapter
dynamic static limit unit sleeve
d A A1 B1 H H1 H2 J L N N1 G s1 C C0 Pu
mm kN kN –
20 38 24 35 70,5 36,5 16 102 140 21,5 13 12 20 14 7,8 0,335 SYJ 25 KF H 2305
25 42 27 38 82,5 42,9 16 118 165 24 17 14 22 19,5 11,2 0,475 SYJ 30 KF H 2306
30 46 28 43 93 47,6 17 129 167 24 17 14 24,3 25,5 15,3 0,655 SYJ 35 KF H 2307
35 49 31 46 99 49,2 18 136,5 184 25,5 17 14 27 30,7 19 0,8 SYJ 40 KF H 2308
40 52 36 50 107,5 54 20 143,5 190 23,5 17 14 28,5 33,2 21,6 0,915 SYJ 45 KF H 2309
45 58 38 55 114,5 57,2 22 157,5 206 26,5 20 16 30,5 35,1 23,2 0,98 SYJ 50 KF H 2310
50 60 40 59 126 63,5 24 171,5 219 27,5 20 16 32,5 43,6 29 1,25 SYJ 55 KF H 2311
55 65 47 62 138 69,8 26,5 188,5 241 29,5 20 16 34,3 52,7 36 1,53 SYJ 60 KF H 2312
60 70 49 65 151 76,2 27 203 265 35 25 20 35,8 57,2 40 1,7 SYJ 65 KF H 2313
1) Bearing unit and adapter sleeve to be ordered separately
142
3.4
.5
Designations Limiting Mass

Bearing unit Separate components speed Bearing unit
without of the bearing unit + sleeve
adapter sleeve Housing Bearing
– r/min kg
SYJ 25 KF SYJ 505 YSA 205-2FK 7 000 0,63
SYJ 30 KF SYJ 506 YSA 206-2FK 6 300 0,90
SYJ 35 KF SYJ 507 YSA 207-2FK 5 300 1,25
SYJ 40 KF SYJ 508 YSA 208-2FK 4 800 1,80
SYJ 45 KF SYJ 509 YSA 209-2FK 4 300 2,10
SYJ 50 KF SYJ 510 YSA 210-2FK 4 000 2,75
SYJ 55 KF SYJ 511 YSA 211-2FK 3 600 3,85
SYJ 60 KF SYJ 512 YSA 212-2FK 3 400 5,00
SYJ 65 KF SYJ 513 YSA 213-2FK 3 000 6,35
143
Y-bearing plummer block units with a cast housing and an adapter sleeve, inch shafts
d 3/4 – 2 1/8 in
A1
N1
s1 N
d H G
B1
H1
H2
A J
L
Dimensions Designations1)
Bearing Adapter
unit sleeve
in/mm –
3/4 1.50 0.94 1.38 2.78 1.44 0.63 4.02 5.51 0.85 0.51 1/ 2 0.79 SYJ 25 KF HE 2305
19,05 38 24 35 70,5 36,5 16 102 140 21,5 13 12 20
15/16 1.65 1.06 1.50 3.25 1.69 0.63 4.65 6.50 0.94 0.67 9/16 0.87 SYJ 30 KF HA 2306
23,813 42 27 38 82,5 42,9 16 118 165 24 17 14 22
1 1.65 1.06 1.50 3.25 1.69 0.63 4.65 6.50 0.94 0.67 9/16 0.87 SYJ 30 KF HE 2306
25,4 42 27 38 82,5 42,9 16 118 165 24 17 14 22
1 3/16 1.81 1.1 1.69 3.66 1.87 0.67 5.08 6.57 0.94 0.67 9/16 0.96 SYJ 35 KF HA 2307
30,163 46 28 43 93 47,6 17 129 167 24 17 14 24,3
1 1/ 4 1.93 1.22 1.81 3.90 1.94 0.71 5.37 7.24 1.00 0.67 9/16 1.06 SYJ 40 KF HE 2308
31,75 49 31 46 99 49,2 18 136,5 184 25,5 17 14 27
1 7/16 2.05 1.42 1.97 4.23 2.13 0.79 5.65 7.48 0.93 0.67 9/16 1.12 SYJ 45 KF HA 2309
36,513 52 36 50 107,5 54 20 143,5 190 23,5 17 14 28,5
1 1/ 2 2.05 1.42 1.97 4.23 2.13 0.79 5.65 7.48 0.93 0.67 9/16 1.12 SYJ 45 KF HE 2309
38,1 52 36 50 107,5 54 20 143,5 190 23,5 17 14 28,5
1 5/ 8 2.28 1.5 2.17 4.51 2.25 0.87 6.20 8.11 1.04 0.79 5/ 8 1.20 SYJ 50 KF HS 2310
41,275 58 38 55 114,5 57,2 22 157,5 206 26,5 20 16 30,5
1 11/16 2.28 1.5 2.17 4.51 2.25 0.87 6.20 8.11 1.04 0.79 5/ 8 1.20 SYJ 50 KF HA 2310
42,863 58 38 55 114,5 57,2 22 157,5 206 26,5 20 16 30,5
1 3/ 4 2.28 1.5 2.17 4.51 2.25 0.87 6.20 8.11 1.04 0.79 5/ 8 1.20 SYJ 50 KF HE 2310
44,45 58 38 55 114,5 57,2 22 157,5 206 26,5 20 16 30,5
1 15/16 2.36 1.57 2.32 4.96 2.50 0.94 6.75 8.62 1.08 0.79 5/ 8 1.28 SYJ 55 KF HA 2311
49,213 60 40 59 126 63,5 24 171,5 219 27,5 20 16 32,5
2 2.36 1.57 2.32 4.96 2.50 0.94 6.75 8.62 1.08 0.79 5/ 8 1.28 SYJ 55 KF HE 2311 B
50,8 60 40 59 126 63,5 24 171,5 219 27,5 20 16 32,5
2 1/ 8 2.56 1.85 2.44 5.43 2.75 1.04 7.42 9.49 1.16 0.79 5/ 8 1.35 SYJ 60 KF HS 2312
53,975 65 47 62 138 69,8 26,5 188,5 241 29,5 20 16 34,3
144
3.4

Bearing unit Separate components ratings load speed Bearing unit
without of the bearing unit dynamic static limit + sleeve
adapter sleeve Housing Bearing C C0 Pu
SYJ 25 KF SYJ 505 YSA 205-2FK 3 150 1 760 80 7 000 1.40

14 7,8 0,335 0,63
SYJ 30 KF SYJ 506 YSA 206-2FK 4 390 2 520 110 6 300 2.00
19,5 11,2 0,475 0,90
SYJ 30 KF SYJ 506 YSA 206-2FK 4 390 2 520 110 6 300 2.00
19,5 11,2 0,475 0,90
SYJ 35 KF SYJ 507 YSA 207-2FK 5 740 3 440 150 5 300 2.75
25,5 15,3 0,655 1,25
SYJ 40 KF SYJ 508 YSA 208-2FK 6 910 4 280 180 4 800 3.95
30,7 19 0,8 1,80
SYJ 45 KF SYJ 509 YSA 209-2FK 7 470 4 860 210 4 300 4.70
33,2 21,6 0,915 2,15
SYJ 45 KF SYJ 509 YSA 209-2FK 7 470 4 860 210 4 300 4.65
33,2 21,6 0,915 2,10
SYJ 50 KF SYJ 510 YSA 210-2FK 7 900 5 220 220 4 000 6.05
35,1 23,2 0,98 2,75
SYJ 50 KF SYJ 510 YSA 210-2FK 7 900 5 220 220 4 000 6.05
35,1 23,2 0,98 2,75
SYJ 50 KF SYJ 510 YSA 210-2FK 7 900 5 220 220 4 000 6.05
35,1 23,2 0,98 2,75
SYJ 55 KF SYJ 511 YSA 211-2FK 9 810 6 530 280 3 600 8.50
43,6 29 1,25 3,85
SYJ 55 KF SYJ 511 YSA 211-2FK 9 810 6 530 280 3 600 8.50
43,6 29 1,25 3,85
SYJ 60 KF SYJ 512 YSA 212-2FK 11 860 8 100 340 3 400 11.0
52,7 36 1,53 5,00
145
Y-bearing plummer block units with a cast housing and an adapter sleeve, inch shafts
d 2 3/16 – 2 3/8 in
A1
N1
s1 N
d H G
B1
H1
H2
A J
L
Bearing Adapter
unit sleeve
in/mm –
2 3/16 2.76 1.93 2.56 5.94 3.00 1.06 7.99 10.43 1.38 0.98 3/ 4 1.41 SYJ 65 KF HA 2313
55,563 70 49 65 151 76,2 27 203 265 35 25 20 35,8
2 1/ 4 2.76 1.93 2.56 5.94 3.00 1.06 7.99 10.43 1.38 0.98 3/ 4 1.41 SYJ 65 KF HE 2313
57,15 70 49 65 151 76,2 27 203 265 35 25 20 35,8
2 3/ 8 2.76 1.93 2.56 5.94 3.00 1.06 7.99 10.43 1.38 0.98 3/ 4 1.41 SYJ 65 KF HS 2313
60,325 70 49 65 151 76,2 27 203 265 35 25 20 35,8
146
3.4

without of the bearing unit dynamic static limit + sleeve
adapter sleeve Housing Bearing C C0 Pu
SYJ 65 KF SYJ 513 YSA 213-2FK 12 870 9 000 380 3 000 14.5
57,2 40 1,7 6,55
SYJ 65 KF SYJ 513 YSA 213-2FK 12 870 9 000 380 3 000 14.5
57,2 40 1,7 6,55
SYJ 65 KF SYJ 513 YSA 213-2FK 12 870 9 000 380 3 000 14.0
57,2 40 1,7 6,35
147
Y-bearing plummer block units with a shortened cast housing and grub screws,
metric shafts
d 20 – 50 mm
A1
s1
d H
B
H1
G1
A G
J
L
SYF

d A A1 B H H1 H2 J L G G1 s1 C C0 Pu tolerance
h6
mm kN kN r/min –
20 32 21 31 65 33,3 – 50,8 65 M 8 14 18,3 12,7 6,55 0,28 8 500 SYF 20 TF

38 24 31 63 30,2 8 52 76 M 10 12 18,3 12,7 6,55 0,28 8 500 SYFJ 20 TF
25 36 22 34,1 70,5 36,5 – 50,8 70 M 10 15 19,8 14 7,8 0,335 7 000 SYF 25 TF

38 25 34,1 73 36,5 10 56 84 M 10 15 19,8 14 7,8 0,335 7 000 SYFJ 25 TF
30 40 25 38,1 83 42,9 – 76,2 98 M 10 15 22,2 19,5 11,2 0,475 6 300 SYF 30 TF

48 28,5 38,1 85 42,9 10 66 94 M 14 18 22,2 19,5 11,2 0,475 6 300 SYFJ 30 TF
35 45 27 42,9 93 47,6 – 82,6 103 M 10 15 25,4 25,5 15,3 0,655 5 300 SYF 35 TF
48 30,5 42,9 96 47,6 12 80 110 M 14 20 25,4 25,5 15,3 0,655 5 300 SYFJ 35 TF
40 48 30 49,2 99 49,2 – 88,9 116 M 12 20 30,2 30,7 19 0,8 4 800 SYF 40 TF

54 31,5 49,2 101 49,2 12 84 116 M 14 20 30,2 30,7 19 0,8 4 800 SYFJ 40 TF
45 48 32 49,2 107,5 54 – 95,3 120 M 12 22 30,2 33,2 21,6 0,915 4 300 SYF 45 TF
54 33,5 49,2 109 54,2 12 90 120 M 14 25 30,2 33,2 21,6 0,915 4 300 SYFJ 45 TF
50 54 34 51,6 114,5 57,2 – 101,6 135 M 16 25,5 32,6 35,1 23,2 0,98 4 000 SYF 50 TF
60 35,5 51,6 117 57,2 14 94 130 M 16 25 32,6 35,1 23,2 0,98 4 000 SYFJ 50 TF
148
A1
s1
d
B
H2
3.5
SYFJ
Designations Mass
Bearing unit Separate components Bearing
– kg
SYF 20 TF SYF 504 YAR 204-2F 0,43

SYFJ 20 TF SYFJ 504 YAR 204-2F 0,54
SYF 25 TF SYF 505 YAR 205-2F 0,52

SYF 30 TF SYF 506 YAR 206-2F 0,90

SYF 35 TF SYF 507 YAR 207-2F 1,20

SYF 40 TF SYF 508 YAR 208-2F 1,50

SYF 45 TF SYF 509 YAR 209-2F 1,80

SYF 50 TF SYF 510 YAR 210-2F 2,20

149
Y-bearing plummer block units with a shortened cast housing and an eccentric locking collar,
metric shafts
d 20 – 50 mm
A1
s1
d H
B1
H1
G1
A G
J
L

d A A1 B1 H H1 J L G G1 s1 C C0 Pu tolerance
h6
mm kN kN r/min –
20 32 21 31 65 33,3 50,8 65 M8 14 23,5 12,7 6,55 0,28 8 500 SYF 20 FM
25 36 22 31 70,5 36,5 50,8 70 M 10 15 23,5 14 7,8 0,335 7 000 SYF 25 FM
30 40 25 35,7 83 42,9 76,2 98 M 10 15 26,7 19,5 11,2 0,475 6 300 SYF 30 FM
35 45 27 38,9 93 47,6 82,6 103 M 10 15 29,4 25,5 15,3 0,655 5 300 SYF 35 FM
40 48 30 43,7 99 49,2 88,9 116 M 12 20 32,7 30,7 19 0,8 4 800 SYF 40 FM
45 48 32 43,7 107,5 54 95,3 120 M 12 22 32,7 33,2 21,6 0,915 4 300 SYF 45 FM
50 54 34 43,7 114,5 57,2 101,6 135 M 16 25,5 32,7 35,1 23,2 0,98 4 000 SYF 50 FM
150
3.6
Designations Mass
– kg
SYF 20 FM SYF 504 YET 204 0,43
SYF 25 FM SYF 505 YET 205 0,52
SYF 30 FM SYF 506 YET 206 0,90
SYF 35 FM SYF 507 YET 207 1,20
SYF 40 FM SYF 508 YET 208 1,50
SYF 45 FM SYF 509 YET 209 1,80
SYF 50 FM SYF 510 YET 210 2,20
151
Y-bearing plummer block units with a pressed steel housing and grub screws,
metric shafts
d 12 – 35 mm
A1
s1
d H G
B
H1 N
H2
A
J
L
P + YAT P + YAR-2F P + YAR-2RF
Dimensions Basic load Fatigue Permissible Designation

ratings load housing Bearing unit
dynamic static limit load No order
d A A1 B H H1 H2 J L N G s1 C C0 Pu radial designation
mm kN kN kN –
12 26 18 27,4 44 22 3 68 86 9,6 8 15,9 9,56 4,75 0,2 1,25 P 12 TF

32 21 27,4 50 25,2 3 76 99 9,6 8 15,9 9,56 4,75 0,2 1,7 P 47 R-12 TF
15 26 18 27,4 44 22 3 68 86 9,6 8 15,9 9,56 4,75 0,2 1,25 P 15 TF

32 21 27,4 50 25,2 3 76 99 9,6 8 15,9 9,56 4,75 0,2 1,7 P 47 R-15 TF
17 26 18 22,1 44 22 3 68 86 9,6 8 15,9 9,56 4,75 0,2 1,25 P 17 RM

26 18 27,4 44 22 3 68 86 9,6 8 15,9 9,56 4,75 0,2 1,25 P 17 TF
32 21 22,1 50 25,2 3 76 99 9,6 8 15,9 9,56 4,75 0,2 1,7 P 47 R-17 RM
32 21 27,4 50 25,2 3 76 99 9,6 8 15,9 9,56 4,75 0,2 1,7 P 47 R-17 TF
20 32 21 25,5 50 25,2 3 76 99 9,6 8 18,3 12,7 6,55 0,28 1,7 P 20 RM

32 21 31 50 25,2 3 76 99 9,6 8 18,3 12,7 6,55 0,28 1,7 P 20 TF
32 21 31 50 25,2 3 76 99 9,6 8 18,3 12,7 6,55 0,28 1,7 P 20 TR
32 24 25,5 56 28,3 3,2 86 108 11,2 10 18,3 12,7 6,55 0,28 1,8 P 52 R-20 RM
32 24 31 56 28,3 3,2 86 108 11,2 10 18,3 12,7 6,55 0,28 1,8 P 52 R-20 TF
25 32 24 27,2 56 28,3 3,2 86 108 11,2 10 19,5 14 7,8 0,335 1,8 P 25 RM

32 24 34,1 56 28,3 3,2 86 108 11,2 10 19,8 14 7,8 0,335 1,8 P 25 TF
32 24 34,1 56 28,3 3,2 86 108 11,2 10 19,8 14 7,8 0,335 1,8 P 25 TR
38 25 27,2 66 32,9 4 95 119 11,2 10 19,5 14 7,8 0,335 2,6 P 62 R-25 RM
38 25 34,1 66 32,9 4 95 119 11,2 10 19,8 14 7,8 0,335 2,6 P 62 R-25 TF
30 38 25 30,2 66 32,9 4 95 119 11,2 10 21 19,5 11,2 0,475 2,6 P 30 RM

38 25 38,1 66 32,9 4 95 119 11,2 10 22,2 19,5 11,2 0,475 2,6 P 30 TF
38 25 38,1 66 32,9 4 95 119 11,2 10 22,2 19,5 11,2 0,475 2,6 P 30 TR
41 27 30,2 78 39,2 5 106 130 11,2 10 21 19,5 11,2 0,475 3,3 P 72 R-30 RM
41 27 38,1 78 39,2 5 106 130 11,2 10 22,2 19,5 11,2 0,475 3,3 P 72 R-30 TF
35 41 27 33 78 39,2 5 106 130 11,2 10 23,3 25,5 15,3 0,655 3,3 P 35 RM

41 27 42,9 78 39,2 5 106 130 11,2 10 25,4 25,5 15,3 0,655 3,3 P 35 TF
41 27 42,9 78 39,2 5 106 130 11,2 10 25,4 25,5 15,3 0,655 3,3 P 35 TR
43 29 33 86 43,5 5 120 148 14 12 23,3 25,5 15,3 0,655 3,8 P 80 R-35 RM
43 29 42,9 86 43,5 5 120 148 14 12 25,4 25,5 15,3 0,655 3,8 P 80 R-35 TF
152
3.7
.8
.6
P + RIS + YAT P + RIS + YAR-2F
Designation Order designations Mass

Bearing unit Housing Bearing Rubber Bearing
No order seating ring unit
designation
– – kg
P 12 TF P 40 YAR 203/12-2F – 0,18

P 47 R-12 TF P 47 YAR 203/12-2F RIS 203 0,22
P 15 TF P 40 YAR 203/15-2F – 0,17

P 47 R-15 TF P 47 YAR 203/15-2F RIS 203 0,21
P 17 RM P 40 YAT 203 – 0,15

P 17 TF P 40 YAR 203-2F – 0,16
P 47 R-17 RM P 47 YAT 203 RIS 203 0,19
P 47 R-17 TF P 47 YAR 203-2F RIS 203 0,20
P 20 RM P 47 YAT 204 – 0,19

P 20 TF P 47 YAR 204-2F – 0,22
P 20 TR P 47 YAR 204-2RF – 0,22
P 52 R-20 RM P 52 YAT 204 RIS 204 0,23
P 52 R-20 TF P 52 YAR 204-2F RIS 204 0,26
P 25 RM P 52 YAT 205 – 0,24

P 25 TF P 52 YAR 205-2F – 0,27
P 25 TR P 52 YAR 205-2RF – 0,27
P 62 R-25 RM P 62 YAT 205 RIS 205 0,35
P 62 R-25 TF P 62 YAR 205-2F RIS 205 0,38
P 30 RM P 62 YAT 206 – 0,42

P 30 TF P 62 YAR 206-2F – 0,47
P 30 TR P 62 YAR 206-2RF – 0,47
P 72 R-30 RM P 72 YAT 206 RIS 206 0,53
P 72 R-30 TF P 72 YAR 206-2F RIS 206 0,58
P 35 RM P 72 YAT 207 – 0,57

P 35 TF P 72 YAR 207-2F – 0,67
P 35 TR P 72 YAR 207-2RF – 0,67
P 80 R-35 RM P 80 YAT 207 RIS 207 0,64
P 80 R-35 TF P 80 YAR 207-2F RIS 207 0,74
153
Y-bearing plummer block units with a pressed steel housing and grub screws,
metric shafts
d 40 – 45 mm
A1
s1
d H G
B
H1 N
H2
A
J
L
P + YAT P + YAR-2F P + YAR-2RF

d A A1 B H H1 H2 J L N G s1 C C0 Pu radial designation
mm kN kN kN –
40 43 29 36 86 43,5 5 120 148 14 12 25,3 30,7 19 0,8 3,8 P 40 RM

43 29 49,2 86 43,5 5 120 148 14 12 30,2 30,7 19 0,8 3,8 P 40 TF
43 29 49,2 86 43,5 5 120 148 14 12 30,2 30,7 19 0,8 3,8 P 40 TR
45 31 36 92 46,4 6 128 156 14 12 25,3 30,7 19 0,8 4,2 P 85 R-40 RM
45 31 49,2 92 46,4 6 128 156 14 12 30,2 30,7 19 0,8 4,2 P 85 R-40 TF
45 45 31 37 92 46,4 6 128 156 14 12 25,8 33,2 21,6 0,915 4,2 P 45 RM

45 31 49,2 92 46,4 6 128 156 14 12 30,2 33,2 21,6 0,915 4,2 P 45 TF
45 31 49,2 92 46,4 6 128 156 14 12 30,2 33,2 21,6 0,915 4,2 P 45 TR
154
3.7
P + RIS + YAT P + RIS + YAR-2F

designation
– – kg
P 40 RM P 80 YAT 208 – 0,80

P 40 TF P 80 YAR 208-2F – 0,92
P 40 TR P 80 YAR 208-2RF – 0,92
P 85 R-40 RM P 85 YAT 208 RIS 208 0,93
P 85 R-40 TF P 85 YAR 208-2F RIS 208 1,05
P 45 RM P 85 YAT 209 – 0,88

P 45 TF P 85 YAR 209-2F – 1,00
P 45 TR P 85 YAR 209-2RF – 1,00
155
Y-bearing plummer block units with a pressed steel housing and grub screws, inch shafts
d 3/4 – 1 3/4 in
G
N
H2
J
L
P + YAR-2F P + YAR-2RF
Bearing unit
No order
d A A1 B H H1 H2 J L N G s1 designation
in/mm –
3/4 1.26 0.83 1.22 1.97 0.99 0.12 2.99 3.90 0.38 5/16 0.72 P 3/4 TF
19,05 32 21 31 50 25,2 3 76 99 9,6 8 18,3
1.26 0.83 1.22 1.97 0.99 0.12 2.99 3.90 0.38 5/16 0.72 P 3/4 TR
32 21 31 50 25,2 3 76 99 9,6 8 18,3
1.26 0.94 1.22 2.20 1.11 0.13 3.39 4.25 0.44 3/ 8 0.72 P 52 R-3/4 TF
32 24 31 56 28,3 3,2 86 108 11,2 10 18,3
1 1.26 0.94 1.34 2.20 1.11 0.13 3.39 4.25 0.44 3/ 8 0.78 P 1. TF
25,4 32 24 34,1 56 28,3 3,2 86 108 11,2 10 19,8
1.26 0.94 1.34 2.20 1.11 0.13 3.39 4.25 0.44 3/ 8 0.78 P 1. TR
32 24 34,1 56 28,3 3,2 86 108 11,2 10 19,8
1.50 0.98 1.34 2.60 1.30 0.16 3.74 4.69 0.44 3/ 8 0.78 P 62 R-1. TF
38 25 34,1 66 32,9 4 95 119 11,2 10 19,8
1 1/ 4 1.61 1.06 1.69 3.07 1.54 0.20 4.17 5.12 0.44 3/ 8 1.00 P 1.1/4 TF
31,75 41 27 42,9 78 39,2 5 106 130 11,2 10 25,4
1.61 1.06 1.69 3.07 1.54 0.20 4.17 5.12 0.44 3/ 8 1.00 P 1.1/4 TR
41 27 42,9 78 39,2 5 106 130 11,2 10 25,4
1.69 1.14 1.69 3.39 1.71 0.20 4.72 5.83 0.55 1/ 2 1.00 P 80 R-1.1/4 TF
43 29 42,9 86 43,5 5 120 148 14 12 25,4
1 1/ 2 1.69 1.14 1.94 3.39 1.71 0.20 4.72 5.83 0.55 1/ 2 1.19 P 1.1/2 TF
38,1 43 29 49,2 86 43,5 5 120 148 14 12 30,2
1.69 1.14 1.94 3.39 1.71 0.20 4.72 5.83 0.55 1/ 2 1.19 P 1.1/2 TR
43 29 49,2 86 43,5 5 120 148 14 12 30,2
1.77 1.22 1.94 3.62 1.83 0.24 5.04 6.14 0.55 1/ 2 1.19 P 85 R-1.1/2 TF
45 31 49,2 92 46,4 6 128 156 14 12 30,2
1 3/ 4 1.77 1.22 1.94 3.62 1.83 0.24 5.04 6.14 0.55 1/ 2 1.19 P 1.3/4 TF
44,45 45 31 49,2 92 46,4 6 128 156 14 12 30,2
1.77 1.22 1.94 3.62 1.83 0.24 5.04 6.14 0.55 1/ 2 1.19 P 1.3/4 TR
45 31 49,2 92 46,4 6 128 156 14 12 30,2
156
3.7
P + RIS + YAR-2F
Designation Order designations Basic load Fatigue Permissible Mass

Bearing unit Housing Bearing Rubber ratings load housing Bearing
No order seating ring dynamic static limit load unit
designation C C0 Pu radial
– – lbf/kN lbf/kN lbf/kN lb/kg
P 3/4 TF P 47 YAR 204-012-2F – 2 860 1 470 60 380 0.51

12,7 6,55 0,28 1,7 0,23
P 3/4 TR P 47 YAR 204-012-2RF – 2 860 1 470 60 380 0.51
12,7 6,55 0,28 1,7 0,23
P 52 R-3/4 TF P 52 YAR 204-012-2F RIS 204 2 860 1 470 60 410 0.60
12,7 6,55 0,28 1,8 0,27
P 1. TF P 52 YAR 205-100-2F – 3 150 1 760 80 410 0.60

14 7,8 0,335 1,8 0,27
P 1. TR P 52 YAR 205-100-2RF – 3 150 1 760 80 410 0.60
14 7,8 0,335 1,8 0,27
P 62 R-1. TF P 62 YAR 205-100-2F RIS 205 3 150 1 760 80 590 0.84
14 7,8 0,335 2,6 0,38
P 1.1/4 TF P 72 YAR 207-104-2F – 5 740 3 440 150 740 1.61

25,5 15,3 0,655 3,3 0,73
P 1.1/4 TR P 72 YAR 207-104-2RF – 5 740 3 440 150 740 1.61
25,5 15,3 0,655 3,3 0,73
P 80 R-1.1/4 TF P 80 YAR 207-104-2F RIS 207 5 740 3 440 150 860 1.92
25,5 15,3 0,655 3,8 0,87
P 1.1/2 TF P 80 YAR 208-108-2F – 6 910 4 280 180 860 2.14

30,7 19 0,8 3,8 0,97
P 1.1/2 TR P 80 YAR 208-108-2RF – 6 910 4 280 180 860 2.14
30,7 19 0,8 3,8 0,97
P 85 R-1.1/2 TF P 85 YAR 208-108-2F RIS 208 6 910 4 280 180 950 2.45
30,7 19 0,8 4,2 1,10
P 1.3/4 TF P 85 YAR 209-112-2F – 7 470 4 860 210 950 2.25

33,2 21,6 0,915 4,2 1,00
P 1.3/4 TR P 85 YAR 209-112-2RF – 7 470 4 860 210 950 2.25
33,2 21,6 0,915 4,2 1,00
157
Y-bearing plummer block units with a pressed steel housing and an eccentric locking collar,
metric shafts
d 15 – 45 mm
A1
s1
d H
B1 G
H1 N
H2
A
J
L
P + YET P + YEL-2F

d A A1 B1 H H1 H2 J L N G s1 C C0 Pu radial designation
mm kN kN kN –
15 26 18 28,6 44 22 3 68 86 9,6 8 22,1 9,56 4,75 0,2 1,25 P 15 FM

32 21 28,6 50 25,2 3 76 99 9,6 8 22,1 9,56 4,75 0,2 1,7 P 47 R-15 FM
17 26 18 28,6 44 22 3 68 86 9,6 8 22,1 9,56 4,75 0,2 1,25 P 17 FM

32 21 28,6 50 25,2 3 76 99 9,6 8 22,1 9,56 4,75 0,2 1,7 P 47 R-17 FM
20 32 21 31 50 25,2 3 76 99 9,6 8 23,5 12,7 6,55 0,28 1,7 P 20 FM

32 21 43,7 50 25,2 3 76 99 9,6 8 26,6 12,7 6,55 0,28 1,7 P 20 WF
32 24 31 56 28,3 3,2 86 108 11,2 10 23,5 12,7 6,55 0,28 1,8 P 52 R-20 FM
32 24 43,7 56 28,3 3,2 86 108 11,2 10 26,6 12,7 6,55 0,28 1,8 P 52 R-20 WF
25 32 24 31 56 28,3 3,2 86 108 11,2 10 23,5 14 7,8 0,335 1,8 P 25 FM

32 24 44,4 56 28,3 3,2 86 108 11,2 10 26,9 14 7,8 0,335 1,8 P 25 WF
38 25 31 66 32,9 4 95 119 11,2 10 23,5 14 7,8 0,335 2,6 P 62 R-25 FM
38 25 44,4 66 32,9 4 95 119 11,2 10 26,9 14 7,8 0,335 2,6 P 62 R-25 WF
30 38 25 35,7 66 32,9 4 95 119 11,2 10 26,7 19,5 11,2 0,475 2,6 P 30 FM

38 25 48,4 66 32,9 4 95 119 11,2 10 30,1 19,5 11,2 0,475 2,6 P 30 WF
41 27 35,7 78 39,2 5 106 130 11,2 10 26,7 19,5 11,2 0,475 3,3 P 72 R-30 FM
41 27 48,4 78 39,2 5 106 130 11,2 10 30,1 19,5 11,2 0,475 3,3 P 72 R-30 WF
35 41 27 38,9 78 39,2 5 106 130 11,2 10 29,4 25,5 15,3 0,655 3,3 P 35 FM
41 27 51,1 78 39,2 5 106 130 11,2 10 32,3 25,5 15,3 0,655 3,3 P 35 WF
43 29 38,9 86 43,5 5 120 148 14 12 29,4 25,5 15,3 0,655 3,8 P 80 R-35 FM
43 29 51,1 86 43,5 5 120 148 14 12 32,3 25,5 15,3 0,655 3,8 P 80 R-35 WF
40 43 29 43,7 86 43,5 5 120 148 14 12 32,7 30,7 19 0,8 3,8 P 40 FM

43 29 56,3 86 43,5 5 120 148 14 12 34,9 30,7 19 0,8 3,8 P 40 WF
45 31 43,7 92 46,4 6 128 156 14 12 32,7 30,7 19 0,8 4,2 P 85 R-40 FM
45 31 56,3 92 46,4 6 128 156 14 12 34,9 30,7 19 0,8 4,2 P 85 R-40 WF
45 45 31 43,7 92 46,4 6 128 156 14 12 32,7 33,2 21,6 0,915 4,2 P 45 FM

45 31 56,3 92 46,4 6 128 156 14 12 34,9 33,2 21,6 0,915 4,2 P 45 WF
158
3.8
P + RIS + YET P + RIS + YEL-2F

designation
– – kg
P 15 FM P 40 YET 203/15 – 0,18

P 47 R-15 FM P 47 YET 203/15 RIS 203 0,23
P 17 FM P 40 YET 203 – 0,18

P 47 R-17 FM P 47 YET 203 RIS 203 0,22
P 20 FM P 47 YET 204 – 0,24

P 20 WF P 47 YEL 204-2F – 0,27
P 52 R-20 FM P 52 YET 204 RIS 204 0,28
P 52 R-20 WF P 52 YEL 204-2F RIS 204 0,31
P 25 FM P 52 YET 205 – 0,28

P 25 WF P 52 YEL 205-2F – 0,33
P 62 R-25 FM P 62 YET 205 RIS 205 0,39
P 62 R-25 WF P 62 YEL 205-2F RIS 205 0,44
P 30 FM P 62 YET 206 – 0,45

P 30 WF P 62 YEL 206-2F – 0,41
P 72 R-30 FM P 72 YET 206 RIS 206 A 0,60
P 72 R-30 WF P 72 YEL 206-2F RIS 206 A 0,66
P 35 FM P 72 YET 207 – 0,75

P 35 WF P 72 YEL 207-2F – 0,83
P 80 R-35 FM P 80 YET 207 RIS 207 A 0,82
P 80 R-35 WF P 80 YEL 207-2F RIS 207 A 0,90
P 40 FM P 80 YET 208 – 0,99

P 40 WF P 80 YEL 208-2F – 1,05
P 85 R-40 FM P 85 YET 208 RIS 208 A 1,10
P 85 R 40 WF P 85 YEL 208-2F RIS 208 A 1,20
P 45 FM P 85 YET 209 – 1,05

P 45 WF P 85 YEL 209-2F – 1,15
159
Y-bearing plummer block units with a pressed steel housing and an eccentric locking collar,
inch shafts
d 3/4 – 1 1/2 in
A1
s1
d H
B1 G
H1 N
H2
A
J
L
P + YET
Bearing unit
No order
d A A1 B1 H H1 H2 J L N G s1 designation
in/mm –
3/4 1.26 0.83 1.22 1.97 0.99 0.12 2.99 3.90 0.38 5/16 0.93 P 3/4 FM
19,05 32 21 31 50 25,2 3 76 99 9,6 8 23,5
1.26 0.94 1.22 2.20 1.11 0.13 3.39 4.25 0.44 3/8 0.93 P 52 R-3/4 FM
32 24 31 56 28,3 3,2 86 108 11,2 10 23,5
1 1.26 0.94 1.22 2.20 1.11 0.13 3.39 4.25 0.44 3/8 0.93 P 1. FM
25,4 32 24 31 56 28,3 3,2 86 108 11,2 10 23,5
1.50 0.98 1.22 2.60 1.30 0.16 3.74 4.69 0.44 3/8 0.93 P 62 R-1. FM
38 25 31 66 32,9 4 95 119 11,2 10 23,5
1 1/ 2 1.69 1.14 1.72 3.39 1.71 0.20 4.72 5.83 0.55 1/2 1.29 P 1.1/2 FM
38,1 43 29 43,7 86 43,5 5 120 148 14 12 32,7
1.77 1.22 1.72 3.62 1.83 0.24 5.04 6.14 0.55 1/2 1.29 P 85 R-1.1/2 FM
45 31 43,7 92 46,4 6 128 156 14 12 32,7
160
3.8
P + RIS + YET

Bearing unit Housing Bearing Rubber ratings load housing Bearing
No order seating ring dynamic static limit load unit
designation C C0 Pu radial
P 3/4 FM P 47 YET 204-012 – 2 860 1 470 60 380 0.57

12,7 6,55 0,28 1,7 0,26
P 52 R-3/4 FM P 52 YET 204-012 RIS 204 2 860 1 470 60 410 0.66
12,7 6,55 0,28 1,8 0,30
P 1. FM P 52 YET 205-100 – 3 150 1 760 80 410 0.62

14 7,8 0,335 1,8 0,28
P 62 R-1. FM P 62 YET 205-100 RIS 205 3 150 1 760 80 590 0.86
14 7,8 0,335 2,6 0,39
P 1.1/2 FM P 80 YET 208-108 – 6 910 4 280 180 860 2.25

30,7 19 0,8 3,8 1,00
P 85 R-1.1/2 FM P 85 YET 208-108 RIS 208 A 6 910 4 280 180 950 2.55
30,7 19 0,8 4,2 1,15
161
Flanged Y-bearing units
Designs ................................................................................................................. 164
Flanged Y-TECH units ............................................................................................. 165
Flanged Y-bearing units with a cast housing............................................................. 166
Flanged Y-bearing units with a pressed steel housing ............................................... 167
Data – general ....................................................................................................... 170

Dimensions .................................................................................................................................... 170
To l erances ...................................................................................................................................... 170
Materials ........................................................................................................................................ 170
Attaching to a support surface...................................................................................................... 171
End covers ..................................................................................................................................... 173
Grease fills ..................................................................................................................................... 173
Mounting ....................................................................................................................................... 173 4
Product tables ....................................................................................................... 174
4.1 Flanged Y-TECH units with a housing with a square flange and grub screws,
metric shafts ......................................................................................................................... 174
4.2 Flanged Y-TECH units with a housing with an oval flange and grub screws,
metric shafts ......................................................................................................................... 176
4.3 Flanged Y-bearing units with a cast housing with a square flange and grub screws,
metric shafts ......................................................................................................................... 178
inch shafts ............................................................................................................................. 182
4.4 Flanged Y-bearing units with a cast housing with a square flange and an eccentric locking collar,
metric shafts ......................................................................................................................... 188
inch shafts ............................................................................................................................. 190
4.5 Flanged Y-bearing units with a cast housing with a square flange and an adapter sleeve,
metric shafts ......................................................................................................................... 194
inch shafts ............................................................................................................................. 196
4.6 Flanged Y-bearing units with a cast housing with an oval flange and grub screws,
metric shafts ......................................................................................................................... 200
inch shafts ............................................................................................................................. 202
4.7 Flanged Y-bearing units with a cast housing with an oval flange and an eccentric locking collar,
metric shafts ......................................................................................................................... 208
inch shafts ............................................................................................................................. 210
4.8 Flanged Y-bearing units with a cast housing with an oval flange and an adapter sleeve,
metric shafts ......................................................................................................................... 214
inch shafts ............................................................................................................................. 216
4.9 Flanged Y-bearing units with a cast housing with a round flange and grub screws,
metric shafts ......................................................................................................................... 218
4.10 Flanged Y-bearing units with a pressed steel housing and grub screws,
metric shafts ......................................................................................................................... 220
inch shafts ............................................................................................................................. 224
4.11 Flanged Y-bearing units with a pressed steel housing and an eccentric locking collar,
metric shafts ......................................................................................................................... 228
inch shafts ............................................................................................................................. 232
163
Designs Fig. 1
SKF flanged Y-bearing units are available as

standard in a wide variety of designs. The stand-
ard assortment includes flanged Y-bearing units
with housings made of:
• composite material († fig. 1)

• pressed sheet steel († fig. 3)
They are located on the shaft via the inner ring

of the insert bearing with either:

• an adapter sleeve
The Y-bearing can be sealed with either: Fig. 2

• the standard integral seal and an
additional flinger
• the highly efficient multiple seal
For additional information about Y-bearings,

refer to the section Y-bearings, starting on
page79.
Flanged Y-bearing units available from stock
are listed in the product tables. Other units can
be assembled by ordering the parts separately.
The tables on pages 168 to 169 show the wide
variety of combinations of Y-bearings and flanged
housings.
Fig. 3
164
Flanged Y-TECH units Fig. 4
Flanged Y-TECH units have housings made

of composite material. They were developed
for bearing arrangements that must operate
reliably in difficult environments for extended
periods without maintenance.There are two
standard series available:
• FYK series († fig. 4) with a square flange

and four bolt holes
• FYTBK series († fig. 5) with an oval flange
and two bolt holes
For additional information about Y-TECH flanged

units for the food industry, refer to page 252.
Flanged Y-TECH units in the FYK series are fitted

with Y-bearings in the: Fig. 5
• YAR 2-2F series, unit designation suffix TF 4

• YAR 2-2RF series, unit designation suffix TR
These units, which are attached to the shaft

with grub screws, are in the standard SKF
assortment.
165
Fig. 6
with a cast housing
Flanged Y-bearing units with a cast housing can
be relubricated through a grease fitting in the
housing. This makes them especially suitable for
bearing arrangements that operate under any
of the following conditions:
• high levels of contamination

• high speeds
• high temperatures
• relatively heavy loads
Three different housing designs are available:
• FY and FYJ series with a square flange and

four holes for attachment bolts († fig. 6)
Fig. 7 • FYC series with a round flange and four holes
for attachment bolts († fig. 7)
• FYT, FYTB and FYTJ series with an oval flange
and two holes for attachment bolts
(† fig. 8).
Fig. 8
166
Flanged Y-bearing units Fig. 9
with a pressed steel housing

Flanged Y-bearing units with a pressed steel
housing are designed for simple applications
with limited loads and speeds. The two-part
housing, which has no provision for relubrica-
tion, is ordered separately from the insert bear-
ing, making a large number of combinations
possible.
The flanged housings made of pressed steel
are available in three different series:
• PF series with a round flange and three or

four square holes for attachment bolts
(† fig. 9)
• PFD series with a triangular flange and three
square holes for attachment bolts († fig. 10)
• PFT series with an oval flange and two square Fig. 10
holes for attachment bolts († fig. 11).

4
Fig. 11
167
Flanged Housings of composite material Cast housings

Y-bearing unit
Y-bearings FYK 5(00) FYTBK 5(00) FY 5(00) FYJ 5(00) FYM 5(00) FYT 5(00)
YAR 2-2F
FYK .. TF FYTBK .. TF FY .. TF FYJ .. TF FYM .. TF FYT .. TF
20–40 mm 20–35 mm 12–65 mm 20–100 mm
3/4–1 1/2in.1) in.1)
3/4–1 1/4 1/2–2 15/16in. 3/4–2 1/2in.1) 1 7/16–3 in. 1/2–2 3/16 in.
YAR 2-2RF
FYK .. TR FYTBK .. TR FY .. TR
20–40 mm 20–35 mm 20–60 mm 20–60 mm1) – –
3/4–1 1/2in.1) in.1)
3/4–1 1/4 in.1)
3/4–2 1/2 in.1)
3/4–2 1/2
YAR 2-2RF/HV
20–40 mm1) 20–35 mm1) 20–50 mm 20–50 mm – –
in.1)
3/4–1 1/2 in.1)
3/4–1 7/16 3/4–1 15/16
in. 3/4–1 15/16
in.
YAR 2-2RF/
VE495
20–40 mm1) 20–35 mm1) 20–50 mm 20–50 mm – –
YAT 2
FYT .. RM
20–40 mm1) 20–35 mm1) 17–50 mm1) 20–50 mm1) –
1/2–2 3/16 in.
YEL 2-2F
FY .. WF
20–40 mm1) 20–35 mm1) 20–60 mm 20–50 mm1) – –
1 –2 7/16 in.
YEL 2-2RF/
VL065
20–40 mm1) 20–35 mm1) 20–40 mm1) 20–40 mm1) – –
YET 2
FY .. FM FYT .. FM
20–40 mm1) 20–35 mm1) 15–60 mm 20–60 mm1) –
in.1)
3/4–1 1/2 in.1)
3/4–1 7/16 3/4–2 3/16
in. in.1)
3/4–1 1/2 1/2–2 3/16 in.
YSA 2-2FK on
adapter sleeve FYJ .. KF
20–35 mm1) 20–30 mm1) 20–60 mm1) 20–60 mm – –
in.1)
3/4–1 1/4 in.1)
3/4–1 3/16 in.1)
3/4–2 3/8 3/4–2 3/8in.
17262(00)
20–40 mm1) 20–35 mm1) 17–60 mm1) 20–60 mm1) – –
168
Flanged Cast housings Pressed steel housings
Y-bearing unit
Y-bearings FYTB 5(00) FYTJ 5(00) FYC 5(00) PF PFD PFT
YAR 2-2F
FYTB .. TF FYTJ .. TF FYC .. TF
12–50 mm 20–50 mm 20–65 mm 12–50 mm1) 12–40 mm1) 12–40 mm1)
3/4–1 3/4
in. 3/4–1 3/4in. 3/4–2 1/2in.1) in.1)
3/4–1 3/4 in.1)
3/4–1 1/2 in.1)
3/4–1 1/2
YAR 2-2RF
FYTB .. TR
20–50 mm 20–50 mm1) 20–65 mm1) 20–35 mm1) 20–40 mm1) 20–40 mm1)
3/4–1 3/4in.1) in.1)
3/4–1 3/4 in.1)
3/4–2 1/2 in.1)
3/4–1 3/4 in.1)
3/4–1 1/2 in.1)
3/4–1 1/2
YAR 2-2RF/HV
20–50 mm 20–50 mm 20–50 mm 20–50 mm 20–40 mm1) 20–40 mm1)
3/4–1 15/16
in. 3/4–1 15/16
in. 3/4–1 15/16
in. 3/4–1 15/16
in. in.1)
3/4–1 1/2 in.1)
3/4–1 1/2
YAR 2-2RF/
VE495
20–50 mm 20–50 mm 20–50 mm 20–50 mm 20–40 mm1) 20–40 mm1) 4
YAT 2
17–50 mm1) 20–50 mm1) 20–50 mm1) 17–50 mm1) 17–40 mm1) 17–40 mm1)
in.1)
5/8–1 15/16 in.1)
5/8–1 1/2 in.1)
5/8–1 1/2
YEL 2-2F
FYTB .. WF
20–50 mm 20–50 mm1) 20–60 mm1) 20–50 mm1) 20–40 mm1) 20–40 mm1)
in.1)
1/2–1 15/16 in.1)
1/2–1 1/2 in.1)
1/2–1 1/2
YEL 2-2RF/
VL065
20–40 mm1) 20–40 mm1) 20–40 mm1) 20–40 mm1) 20–40 mm1) 20–40 mm1)
YET 2
FYTB .. FM
15–50 mm 20–50 mm1) 20–40 mm1) 15–50 mm1) 15–40 mm1) 15–40 mm1)
3/4–1 1/2in.1) in.1)
3/4–1 1/2 in.1)
3/4–1 1/2 in.1)
3/4–1 3/4 in.1)
3/4–1 1/2 in.1)
3/4–1 1/2
YSA 2-2FK on
adapter sleeve FYTJ .. KF
20–45 mm1) 20–45 mm 20–60 mm1) 20–45 mm1) 20–35 mm1) 20–35 mm1)
in.1)
3/4–1 3/4 3/4–1 3/4in. in.1)
3/4–2 3/8 in.1)
3/4–1 3/4 in.1)
3/4–1 1/4 in.1)
3/4–1 3/4
17262(00)
17–50 mm1) 20–50 mm1) 20–60 mm1) 17–50 mm1) 17–40 mm1) 17–40 mm1)
169
Data – general Fig. 12
Dimensions T
The boundary dimensions for most flanged

Y-bearing housings are in accordance with the
following standards:
• Housings in the FY, FYT and FYTB series are

in accordance with ISO 3228:1993.
• Housings in the FYJ, FYTJ and FYC series
are in accordance with JIS B 1559-1995.
• Housings in the PF, PFD and PFT series
are in accordance with ISO 3228:1993.
Tolerances
For flanged Y-bearing units with a cast housing,
the tolerance for the total width T of the unit
(† fig. 12) is: Materials
• ±0,5 mm for units up to and including 50 mm Composite housings

bore diameter These housings are made of injection moulded
• ±0,6 mm for larger units glass fibre reinforced polyamide 6. A steel coil
embedded in the housing adds greater stability
For flanged Y-bearing units with housings made to the form of the housing, even if temperatures
of composite material or grey cast iron, the out- are elevated.
side diameter of the bearing is matched to the The bolt holes for housings in the FYK and
diameter of the housing bore so that the outer FYTBK series are reinforced with zinc-plated
ring is prevented from turning in its seat, but sheet steel inserts. The standard housing colour
still able to compensate for misalignment. is black.
Additional information about tolerances for
the inner ring bore are listed in the section Cast housings
Y-bearings on page 89. Cast housings are manufactured from grey cast
iron EN-GJL HB195 in accordance with
EN 1561:1997.
Radial internal clearance
The Y-bearing used in a flanged Y-bearing unit Pressed steel housings
has the same radial internal clearance as a Pressed steel housings are made from cold-rolled
similarly sized individual Y-bearing. steel and are zinc-coated for corrosion protection.
Additional information about the radial
internal clearance can be found in the section
Y-bearings on page 90. Load carrying ability of the housings
Housings made of either composite material
or grey cast iron are able to withstand the same
dynamic and static loads as the Y-bearings they
incorporate. These Y-bearing units can also be
used for applications where shock loads or vari-
able axial loads occur.
If SKF Y-bearing units are to be used in an
application where health, safety, or the environ-
ment is at risk, contact the SKF application engin-
eering service during the design phase.
170
Fig. 13
Pressed steel housings have a lower load car-
rying capacity than their insert bearings. Per-
missible radial loads are specified in the product
tables. The axial load should not exceed 20% of
the permissible radial load.
If the Y-bearing units will be subjected to
shock loads or variable axial loads, a grey cast
iron or Y-TECH housing should always be used.
Flanged composite housings and most grey
cast iron housings have a recess († fig. 13a),
DaH11
or shoulder († fig. 13b) at the back for accu-
rate positioning, either on an appropriate shoul-
der or in a bore in the machine wall.
An appropriate shoulder can be provided by
one of the following methods:
• machining the wall accordingly († fig. 13c)

• attaching an appropriate washer to the wall a
by several screws († fig. 13d)
Furthermore, these features relieve the 4

attachment bolts of radial forces.
Attaching to a support surface

Flanged Y-bearing units have two, three or four
bolt holes through which they can be attached to
h
8
their support surface with threaded fasteners. Da
These bolt holes are:
• round and reinforced with pressed steel

inserts in composite housings
• drilled and round in cast housings
• square in pressed steel housings
In the absence of a centring shoulder and when b

heavy loads apply, SKF recommends doweling
the housing to its support surface. Dimples for
the dowel pin holes are cast into housings in the
FY, FYJ, FYTB and FYTJ series. Information on
the position and size of the holes for these dowel
pins is provided in table 1, page 172.
c d
171
Table 1
Position and size of dowel pin holes for flanged Y-bearing housings made of grey cast iron
J7 J7
N4
N4
J6
J6
Housing Dimensions for housings in the

size FY, FYJ series FYT, FYTB, FYTJ series
J6 J7 N4 J6 J7 N4
– mm
503 66 12 4 61,5 11 2
504 74 16 4 74 11,5 2
505 83 19 4 81 12 4
506 96 24,5 4 99 12,5 4

507 106 29 4 106 15 5
508 118 34 4 116 16 6
509 123 33,5 5 120 18 6

510 129 35,5 5 127 20 6
511 148 45 5 154 18 6
512 161 49,5 5 – – –

513 169 51 6 – – –
514 169 49 8 – – –
515 176 51,5 8 – – –
516 184 51,5 8 – – –

518 207 52,5 8 – – –
520 233 55 8 – – –
172
End covers Fig. 14
To protect the shaft ends and avoid any accidents,

end covers are available for flanged Y-TECH
units and most flanged Y-bearing units with a
cast housing († fig. 14).
bearing unit. The designation of the end cover is
listed together with the distance that the end
refer to the section Design of Y-bearing arrange-
ments, on page 47.
Grease fills
All standard SKF flanged Y-bearing units are
filled with a high-quality long-lasting grease
containing a lithium-calcium thickener that has a
consistency of 2 on the NLGI scale.
For additional information about lubricants 4
and maintenance, starting on page 48.
Mounting
The procedure for mounting a flanged Y-bearing
unit depends on:
• the design of the housing

• the method used to attach the unit to the
shaft
These methods are described in detail in the

section Mounting instructions, starting on
page 52.
173
Flanged Y-TECH units with a housing with a square flange and grub screws, metric shafts
d 20 – 40 mm
A1 N
3,2 H14
s1
H11
d Da
B
G
J
A2 L
TF T TR

d A 1 A2 B Da J L N G s1 T C C0 Pu tolerance
h6
mm kN kN r/min –
20 30 15 31 68,3 63,5 86 12 10 18,3 37,3 12,7 6,55 0,28 8 500 FYK 20 TF

30 15 31 68,3 63,5 86 12 10 18,3 37,3 12,7 6,55 0,28 5 000 FYK 20 TR
25 31 15 34,1 74,6 70 95 12 10 19,8 38,8 14 7,8 0,335 7 000 FYK 25 TF

31 15 34,1 74,6 70 95 12 10 19,8 38,8 14 7,8 0,335 4 300 FYK 25 TR
30 33 15,3 38,1 93,7 82,5 108 12 10 22,2 42,2 19,5 11,2 0,475 6 300 FYK 30 TF
33 15,3 38,1 93,7 82,5 108 12 10 22,2 42,2 19,5 11,2 0,475 3 800 FYK 30 TR
35 35 17 42,9 106,4 92 118 14,5 12 25,4 46,4 25,5 15,3 0,655 5 300 FYK 35 TF
35 17 42,9 106,4 92 118 14,5 12 25,4 46,4 25,5 15,3 0,655 3 200 FYK 35 TR
40 39 17 49,2 115,9 101,5 130 14,5 12 30,2 54,2 30,7 19 0,8 4 800 FYK 40 TF
39 17 49,2 115,9 101,5 130 14,5 12 30,2 54,2 30,7 19 0,8 2 800 FYK 40 TR
174
A5

A5
4.1
– kg – mm
FYK 20 TF FYK 504 YAR 204-2F 0,26 ECY 204 18,5

FYK 20 TR FYK 504 YAR 204-2RF 0,26 ECY 204 18,5
FYK 25 TF FYK 505 YAR 205-2F 0,33 ECY 205 18

FYK 25 TR FYK 505 YAR 205-2RF 0,33 ECY 205 18


FYK 40 TF FYK 508 YAR 208-2F 0,87 ECY 208 23,5

FYK 40 TR FYK 508 YAR 208-2RF 0,87 ECY 208 23,5
175
Flanged Y-TECH units with a housing with an oval flange and grub screws, metric shafts
d 20 – 35 mm
A1 N
3,2H14
s1
H11
d Da J H
B
A2 L
TF T TR

d A1 A2 B Da H J L N G s1 T C C0 Pu tolerance
h6
mm kN kN r/min –
20 29,5 15 31 50,8 112 90 60,5 12 10 18,3 37,3 12,7 6,55 0,28 8 500 FYTBK 20 TF
29,5 15 31 50,8 112 90 60,5 12 10 18,3 37,3 12,7 6,55 0,28 5 000 FYTBK 20 TR
25 30 15 34,1 63,5 124 99 70 12 10 19,8 38,8 14 7,8 0,335 7 000 FYTBK 25 TF

30 15 34,1 63,5 124 99 70 12 10 19,8 38,8 14 7,8 0,335 4 300 FYTBK 25 TR
30 33 15 38,1 76,2 142,5 116,5 83 12 10 22,2 42,2 19,5 11,2 0,475 6 300 FYTBK 30 TF
33 15 38,1 76,2 142,5 116,5 83 12 10 22,2 42,2 19,5 11,2 0,475 3 800 FYTBK 30 TR
35 35 17 42,9 88,9 156 130 96 14,5 12 25,4 46,4 25,5 15,3 0,655 5 300 FYTBK 35 TF
35 17 42,9 88,9 156 130 96 14,5 12 25,4 46,4 25,5 15,3 0,655 3 200 FYTBK 35 TR
176
A5

A5
4.2
– kg – mm
FYTBK 20 TF FYTBK 504 YAR 204-2F 0,24 ECY 204 18,5

FYTBK 20 TR FYTBK 504 YAR 204-2RF 0,24 ECY 204 18,5
FYTBK 25 TF FYTBK 505 YAR 205-2F 0,29 ECY 205 18

FYTBK 25 TR FYTBK 505 YAR 205-2RF 0,29 ECY 205 18


177
Flanged Y-bearing units with a cast housing with a square flange and grub screws,
metric shafts
d 12 – 60 mm
A1
A2 N
3,2H14
s1
H11
d Da
B
G
J
L
TF T TR

d A1 A2 B Da J L N G s1 T C C0 Pu tolerance
h6
mm kN kN r/min –
12 26 11 27,4 55,6 54 76 11,5 10 15,9 32,9 9,56 4,75 0,2 9 500 FY 12 TF
15 26 11 27,4 55,6 54 76 11,5 10 15,9 32,9 9,56 4,75 0,2 9 500 FY 15 TF
17 26 11 27,4 55,6 54 76 11,5 10 15,9 32,9 9,56 4,75 0,2 9 500 FY 17 TF
20 29,5 11 31 68,3 63,5 86 11,5 10 18,3 37,3 12,7 6,55 0,28 8 500 FY 20 TF
25,5 12 31 68,3 64 86 12 10 18,3 33,3 12,7 6,55 0,28 8 500 FYJ 20 TF
29,5 11 31 68,3 63,5 86 11,5 10 18,3 37,3 12,7 6,55 0,28 5 000 FY 20 TR
25 30 12 34,1 74,6 70 95 11,5 10 19,8 38,8 14 7,8 0,335 7 000 FY 25 TF

27 14 34,1 74,6 70 95 12 10 19,8 35,8 14 7,8 0,335 7 000 FYJ 25 TF
30 12 34,1 74,6 70 95 11,5 10 19,8 38,8 14 7,8 0,335 4 300 FY 25 TR
30 32,5 13 38,1 93,7 82,5 108 11,5 10 22,2 42,2 19,5 11,2 0,475 6 300 FY 30 TF
31 14 38,1 93,7 83 108 12 10 22,2 40,2 19,5 11,2 0,475 6 300 FYJ 30 TF
32,5 13 38,1 93,7 82,5 108 11,5 10 22,2 42,2 19,5 11,2 0,475 3 800 FY 30 TR
35 34,5 13 42,9 106,4 92 118 14 12 25,4 46,4 25,5 15,3 0,655 5 300 FY 35 TF
34 16 42,9 106,4 92 118 14 12 25,4 44,4 25,5 15,3 0,655 5 300 FYJ 35 TF
34,5 13 42,9 106,4 92 118 14 12 25,4 46,4 25,5 15,3 0,655 3 200 FY 35 TR
40 38,5 14 49,2 115,9 101,5 130 14 12 30,2 54,2 30,7 19 0,8 4 800 FY 40 TF
36 16 49,2 115,9 102 130 16 14 30,2 51,2 30,7 19 0,8 4 800 FYJ 40 TF
38,5 14 49,2 115,9 101,5 130 14 12 30,2 54,2 30,7 19 0,8 2 800 FY 40 TR
45 39 14 49,2 119,1 105 137 16 14 30,2 54,2 33,2 21,6 0,915 4 300 FY 45 TF
38 18 49,2 119,1 105 137 16 14 30,2 52,2 33,2 21,6 0,915 4 300 FYJ 45 TF
39 14 49,2 119,1 105 137 16 14 30,2 54,2 33,2 21,6 0,915 2 400 FY 45 TR
50 43 15 51,6 125,4 111 143 18 16 32,6 60,6 35,1 23,2 0,98 4 000 FY 50 TF
40 18 51,6 125,4 111 143 16 14 32,6 54,6 35,1 23,2 0,98 4 000 FYJ 50 TF
43 15 51,6 125,4 111 143 18 16 32,6 60,6 35,1 23,2 0,98 2 200 FY 50 TR
55 47,5 16 55,6 150,8 130 162 18 16 33,4 64,4 43,6 29 1,25 3 600 FY 55 TF
43 20 55,6 150,8 130 162 19 16 33,4 58,4 43,6 29 1,25 3 600 FYJ 55 TF
47,5 16 55,6 150,8 130 162 18 16 33,4 64,4 43,6 29 1,25 1 900 FY 55 TR
60 52 17 65,1 161,9 143 175 18 16 39,7 73,7 52,7 36 1,53 3 400 FY 60 TF

48 20 65,1 161,9 143 175 19 16 39,7 68,7 52,7 36 1,53 3 400 FYJ 60 TF
52 17 65,1 161,9 143 175 18 16 39,7 73,7 52,7 36 1,53 1 800 FY 60 TR
178
A5

A5
4.3
– kg – mm
FY 12 TF FY 503 M YAR 203/12-2F 0,47 – –
FY 15 TF FY 503 M YAR 203/15-2F 0,45 – –
FY 17 TF FY 503 M YAR 203-2F 0,44 – –
FY 20 TF FY 504 M YAR 204-2F 0,60 ECY 204 18,5

FYJ 20 TF FYJ 504 YAR 204-2F 0,65 – –
FY 20 TR FY 504 M YAR 204-2RF 0,60 ECY 204 18,5
FY 25 TF FY 505 M YAR 205-2F 0,77 ECY 205 18

FYJ 25 TF FYJ 505 YAR 205-2F 0,86 – –
FY 25 TR FY 505 M YAR 205-2RF 0,77 ECY 205 18
FY 30 TF FY 506 M YAR 206-2F 1,10 ECY 206 20

FYJ 30 TF FYJ 506 YAR 206-2F 1,20 – –
FY 35 TF FY 507 M YAR 207-2F 1,40 ECY 207 22

FYJ 35 TF FYJ 507 YAR 207-2F 1,50 – –
FY 40 TF FY 508 M YAR 208-2F 1,90 ECY 208 23,5

FYJ 40 TF FYJ 508 YAR 208-2F 1,80 – –
FY 45 TF FY 509 M YAR 209-2F 2,10 ECY 209 23

FYJ 45 TF FYJ 509 YAR 209-2F 2,45 – –
FY 50 TF FY 510 M YAR 210-2F 2,50 ECY 210 29,5

FYJ 50 TF FYJ 510 YAR 210-2F 3,15 – –
FY 55 TF FY 511 M YAR 211-2F 3,60 ECY 211 34

FYJ 55 TF FYJ 511 YAR 211-2F 3,45 – –
FY 60 TF FY 512 M YAR 212-2F 4,60 ECY 212 35,5

FYJ 60 TF FYJ 512 YAR 212-2F 4,50 – –
179
metric shafts
d 65 – 100 mm
A1
A2 N
H14
3,2
s1
H11
d Da
B
G
J
L
TF T

d A1 A2 B Da J L N G s1 T C C0 Pu tolerance
h6
mm kN kN r/min –
65 52,5 17 68,3 161,9 149,5 187 18 16 42,9 76,9 57,2 40 1,7 3 000 FY 65 TF
50 20 68,3 161,9 149 187 19 16 42,9 72,9 57,2 40 1,7 3 000 FYJ 65 TF
70 50,3 21,3 69,9 161,9 152 193 19 16 39,7 70,7 62,4 44 1,86 2 800 FYJ 70 TF
75 53,6 22,1 73,1 179,4 159 200 19 16 46,1 80,1 66,3 49 2,04 2 600 FYJ 75 TF
80 54,5 22 77,9 179,4 165 208 23 20 47,7 81,7 72,8 53 2,16 2 400 FYJ 80 TF
90 63,4 23,4 89 193,7 187 235 23 20 54 94 95,6 72 2,7 2 000 FYJ 90 TF
100 70 25 98,4 215,9 210 265 27 24 63,4 107,5 124 93 3,35 1 900 FYJ 100 TF
180
A5

A5
4.3
– kg – mm
FY 65 TF FY 513 M YAR 213-2F 5,30 ECY 213 35,5

FYJ 65 TF FYJ 513 YAR 213-2F 5,80 – –
FYJ 70 TF FYJ 514 YAR 214-2F 6,00 – –
FYJ 75 TF FYJ 515 YAR 215-2F 6,80 – –
FYJ 80 TF FYJ 516 YAR 216-2F 7,60 – –
FYJ 90 TF FYJ 518 YAR 218-2F 11,5 – –
FYJ 100 TF FYJ 520 YAR 220-2F 15,2 – –
181
inch shafts
d 1/2 – 1 1/4 in
A1
A2 N
H14
3,2
s1
H11
d Da
B
G
J
L
TF T
Bearing unit
d A1 A2 B J L G s1 T
in/mm –
1/2 0.92 0.39 1.08 2.13 3.00 3/8 0.63 1.20 FY 1/2 TF
12,7 23,4 9,9 27,4 54 76,2 10 15,9 30,6
5/8 0.92 0.39 1.08 2.13 3.00 3/8 0.63 1.20 FY 5/8 TF
15,875 23,4 9,9 27,4 54 76,2 10 15,9 30,6
3/4 1.16 0.43 1.22 2.50 3.39 3/8 0.72 1.47 FY 3/4 TF
19,05 29,5 11 31 63,5 86 10 18,3 37,3
1.00 0.47 1.22 2.52 3.39 3/8 0.72 1.31 FYJ 3/4 TF
25,5 12 31 64 86 10 18,3 33,3
13/16 1.18 0.47 1.34 2.76 3.74 7/16 0.78 1.53 FY 13/16 TF
20,638 30 12 34,1 70 95 10 19,8 38,8
7/8 1.18 0.47 1.34 2.76 3.74 7/16 0.78 1.53 FY 7/8 TF
22,225 30 12 34,1 70 95 10 19,8 38,8
15/16 1.18 0.47 1.34 2.76 3.74 7/16 0.78 1.53 FY 15/16 TF
23,813 30 12 34,1 70 95 10 19,8 38,8
1 1.18 0.47 1.34 2.76 3.74 3/8 0.78 1.53 FY 1. TF

25,4 30 12 34,1 70 95 10 19,8 38,8
1.06 0.55 1.34 2.76 3.74 3/8 0.78 1.41 FYJ 1. TF
27 14 34,1 70 95 10 19,8 35,8
1 1/16 1.28 0.51 1.50 3.25 4.25 7/16 0.87 1.66 FY 1.1/16 TF
26,9875 32,5 13 38,1 82,5 108 10 22,2 42,2
1 1/ 8 1.28 0.51 1.50 3.25 4.25 7/16 0.87 1.66 FY 1.1/8 TF

28,575 32,5 13 38,1 82,5 108 10 22,2 42,2
1 3/16 1.28 0.51 1.50 3.25 4.25 7/16 0.87 1.66 FY 1.3/16 TF
30,163 32,5 13 38,1 82,5 108 10 22,2 42,2
1 1/ 4 1.36 0.51 1.69 3.62 4.65 1/2 1.00 1.83 FY 1.1/4 TF

31,75 34,5 13 42,9 92 118 12 25,4 46,4
1.34 0.51 1.69 3.62 4.65 1/2 1.00 1.75 FYJ 1.1/4 TF
34 16 42,9 92 118 12 25,4 44,4
182
Housing Bearing dynamic static
C C0
limit
Pu
with shaft
tolerance
4.3
h6
FY 1/2 TF FY 503 U YAR 203-008-2F 2 150 1 070 50 9 500 1.00

9,56 4,75 0,2 0,46
FY 5/8 TF FY 503 U YAR 203-010-2F 2 150 1 070 50 9 500 1.05

9,56 4,75 0,2 0.95
FY 3/4 TF FY 504 M YAR 204-012-2F 2 860 1 470 60 8 500 1.35

12,7 6,55 0,28 0,61
FYJ 3/4 TF FYJ 504 YAR 204-012-2F 2 860 1 470 60 8 500 1.45
12,7 6,55 0,28 0,66
FY 13/16 TF FY 505 U YAR 205-013-2F 3 150 1 760 80 7 000 1.80

14 7,8 0,335 0,81
FY 7/8 TF FY 505 U YAR 205-014-2F 3 150 1 760 80 7 000 1.75

14 7,8 0,335 0,80
FY 15/16 TF FY 505 U YAR 205-015-2F 3 150 1 760 80 7 000 1.70

14 7,8 0,335 0,78
FY 1. TF FY 505 M YAR 205-100-2F 3 150 1 760 80 7 000 1.70

14 7,8 0,335 0,77
FYJ 1. TF FYJ 505 YAR 205-100-2F 3 150 1 760 80 7 000 1.90
14 7,8 0,335 0,86
FY 1.1/16 TF FY 506 U YAR 206-101-2F 4 390 2 520 110 6 300 2.45

19,5 11,2 0,475 1,10
FY 1.1/8 TF FY 506 U YAR 206-102-2F 4 390 2 520 110 6 300 2.50

19,5 11,2 0,475 1,10
FY 1.3/16 TF FY 506 U YAR 206-103-2F 4 390 2 520 110 6 300 2.40

19,5 11,2 0,475 1,10
FY 1.1/4 TF FY 507 M YAR 207-104-2F 5 740 3 440 150 5 300 3.20

25,5 15,3 0,655 1,45
FYJ 1.1/4 TF FYJ 507 YAR 207-104-2F 5 740 3 440 150 5 300 3.40
25,5 15,3 0,655 1,55
183
inch shafts
d 1 5/16 – 1 15/16 in
A1
A2
N
H14
3,2
s1
H11
d Da
B
G
J
L
T
FY .. TF FY .. RM
Bearing unit
in/mm –
1 5/16 1.36 0.51 1.69 3.62 4.65 1/ 2 1.00 1.83 FY 1.5/16 TF

33,338 34,5 13 42,9 92 118 12 25,4 46,4
1 3/ 8 1.36 0.51 1.69 3.62 4.65 1/ 2 1.00 1.83 FY 1.3/8 TF

34,925 34,5 13 42,9 92 118 12 25,4 46,4
1 7/16 1.36 0.51 1.69 3.62 4.65 1/ 2 1.00 1.83 FY 1.7/16 TF

36,513 34,5 13 42,9 92 118 12 25,4 46,4
1.52 0.55 1.94 4.00 5.12 1/ 2 1.19 2.13 FYM 1.7/16 TF
38,5 14 49,2 101,5 130 12 30,2 54,2
1 1/ 2 1.52 0.55 1.94 4.00 5.12 1/ 2 1.19 2.13 FY 1.1/2 TF

38,1 38,5 14 49,2 101,5 130 12 30,2 54,2
1.42 0.63 1.94 4.02 5.12 9/16 1.19 2.02 FYJ 1.1/2 TF
36 16 49,2 102 130 14 30,2 51,2
1.54 0.55 1.94 4.13 5.39 9/16 1.19 2.13 FYM 1.1/2 TF
39 14 49,2 105 137 14 30,2 54,2
1 5/ 8 1.54 0.55 1.94 4.13 5.39 9/16 1.19 2.13 FY 1.5/8 TF

41,275 39 14 49,2 105 137 14 30,2 54,2
1 11/16 1.69 0.59 2.03 4.37 5.63 9/16 1.28 2.39 FYM 1.11/16 TF
42,863 43 15 51,6 111 143 14 32,6 60,6
1 3/ 4 1.54 0.55 1.94 4.13 5.39 9/16 1.19 2.13 FY 1.3/4 TF

44,45 39 14 49,2 105 137 14 30,2 54,2
1.54 0.55 1.63 4.13 5.39 9/16 1.20 2.13 FY 1.3/4 RM
39 14 41,5 105 137 14 30,5 54,2
1.50 0.71 1.94 4.13 5.39 9/16 1.19 2.06 FYJ 1.3/4 TF
38 18 49,2 105 137 14 30,2 52,2
1.69 0.59 2.03 4.37 5.63 9/16 1.28 2.39 FYM 1.3/4 TF
43 15 51,6 111 143 14 32,6 60,6
1 15/16 1.69 0.59 2.03 4.37 5.63 9/16 1.28 2.39 FY 1.15/16 TF
49,213 43 15 51,6 111 143 14 32,6 60,6
1.87 0.63 2.19 5.12 6.38 5/ 8 1.31 2.54 FYM 1.15/16 TF
47,5 16 55,6 130 162 16 33,4 64,4
184
C C0
limit
Pu
with shaft
tolerance
4.3
h6
FY 1.5/16 TF FY 507 U YAR 207-105-2F 5 740 3 440 150 5 300 3.20

25,5 15,3 0,655 1,45
FY 1.3/8 TF FY 507 U YAR 207-106-2F 5 740 3 440 150 5 300 3.15

25,5 15,3 0,655 1,40
FY 1.7/16 TF FY 507 U YAR 207-107-2F 5 740 3 440 150 5 300 3.05

25,5 15,3 0,655 1,40
FYM 1.7/16 TF FY 508 U YAR 208-107-2F 6 910 4 280 180 4 800 4.50
30,7 19 0,8 2,00
FY 1.1/2 TF FY 508 M YAR 208-108-2F 6 910 4 280 180 4 800 4.20

30,7 19 0,8 1,90
FYJ 1.1/2 TF FYJ 508 YAR 208-108-2F 6 910 4 280 180 4 800 4.30
30,7 19 0,8 1,95
FYM 1.1/2 TF FY 509 U YAR 209-108-2F 7 470 4 860 210 4 300 5.50
33,2 21,6 0,915 2,50
FY 1.5/8 TF FY 509 U YAR 209-110-2F 7 470 4 860 210 4 300 4.40

33,2 21,6 0,915 2,20
FYM 1.11/16 TF FY 510 U YAR 210-111-2F 7 900 5 220 220 4 000 5.50
35.1 23.2 0.98 2,50
FY 1.3/4 TF FY 509 M YAR 209-112-2F 7 470 4 860 210 4 300 4.75

33,2 21,6 0,915 2,15
FY 1.3/4 RM FY 509 U YAT 209-112 7 470 4 860 210 4 300 4.40
33,2 21,6 0,915 2,00
FYJ 1.3/4 TF FYJ 509 YAR 209-112-2F 7 470 4 860 210 4 300 5.50
33,2 21,6 0,915 2,50
FYM 1.3/4 TF FY 510 U YAR 210-112-2F 7 900 5 220 220 4 000 5.50
35,1 23,2 0,98 2,50
FY 1.15/16 TF FY 510 U YAR 210-115-2F 7 900 5 220 220 4 000 5.25

35,1 23,2 0,98 2,50
FYM 1.15/16 TF FY 511 U YAR 211-115-2F 9 810 6 530 280 3 600 9.00
43,6 29 1,25 4,00
185
inch shafts
d 2 – 3 in
A1
A2 N
H14
3,2
s1
H11
d Da
B
G
J
L
T
Bearing unit
in/mm –
2 1. 87 0.63 2.19 5.12 6.38 5/8 1.31 2.54 FY 2. TF

50,8 47,5 16 55,6 130 162 16 33,4 64,4
1.69 0.79 2.19 5.12 6.38 5/ 8 1.31 2.30 FYJ 2. TF
43 20 55,6 130 162 16 33,4 58,4
2 3/16 1.87 0.63 2.19 5.12 6.38 5/ 8 1.31 2.54 FY 2.3/16 TF

55,563 47,5 16 55.6 130 162 16 33,4 64,4
2.05 0.67 2.56 5.63 6.89 5/ 8 1.56 2.90 FYM 2.3/16 TF
52 17 65,1 143 175 16 39,7 73,7
2 1/ 4 2.05 0.67 2.56 5.63 6.89 5/ 8 1.56 2.90 FY 2.1/4 TF

57,15 52 17 65,1 143 175 16 39,7 73,7
2 7/16 2.05 0.67 2.56 5.63 6.89 5/ 8 1.56 2.90 FY 2.7/16 TF

61,913 52 17 65,1 143 175 16 39,7 73,7
2.25 0.69 2.75 5.88 7.37 5/ 8 1.56 3.00 FYM 2.7/16 TF
57,15 17,5 69,6 149,3 187,5 16 39,7 76,2
2 1/ 2 2.07 0.67 2.69 5.89 7.36 5/ 8 1.69 3.03 FY 2.1/2 TF

63,5 52,5 17 68,3 149,5 187 16 42,9 76,9
1.97 0.78 2.69 5.87 7.36 5/ 8 1.69 2.87 FYJ 2.1/2 TF
50 20 68,3 149 187 16 42,9 72,9
2 11/16 2.07 0.65 2.69 5.89 7.36 5/ 8 1.69 2.85 FY 2.11/16 TF

68,263 52,5 16,5 68,3 149,5 187 16 42,9 72,4
2 3/ 4 2.56 0.75 2.88 6.00 7.75 3/ 4 1.82 3.44 FY 2.3/4 TF

69,85 65,1 19 73,1 152,4 197 20 46,1 87,4
2 15/16 2.56 0.75 2.88 6.00 7.75 3/ 4 1.82 3.44 FY 2.15/16 TF

74,613 65,1 19 73,1 152,4 197 20 46,1 87.4
2.31 0.87 3.07 6.00 7.75 3/ 4 1.88 3.25 FYM 2.15/16 TF
58,7 22,2 77,9 152,4 197 20 47,7 82,6
3 2.31 0.87 3.07 6.00 7.75 3/ 4 1.88 3.25 FYM 3. TF

76,2 58,7 22,2 77,9 152,4 197 20 47,7 82,6
186
C C0
limit
Pu
with shaft
tolerance
4.3
h6
FY 2. TF FY 511 M YAR 211-200-2F 9 810 6 530 280 3 600 8.25

43,6 29 1,25 3,75
FYJ 2. TF FYJ 511 YAR 211-200-2F 9 810 6 530 280 3 600 7.95
43,6 29 1,25 3,60
FY 2.3/16 TF FY 511 U YAR 211-203-2F 9 810 6 530 280 3 600 7.85

43,6 29 1,25 3,55
FYM 2.3/16 TF FY 512 U YAR 212-203-2F 11 860 8 100 340 3 400 11.0
52,7 36 1,53 5,00
FY 2.1/4 TF FY 512 U YAR 212-204-2F 11 860 8 100 340 3 400 10.5

52,7 36 1,53 4,75
FY 2.7/16 TF FY 512 U YAR 212-207-2F 11 860 8 100 340 3 400 10.0

52,7 36 1,53 4,60
FYM 2.7/16 TF FY 514 U YAR 214-207-2F 14 040 9 900 420 2 800 13.0
62,4 44 1,86 6,0
FY 2.1/2 TF FY 513 M YAR 213-208-2F 12 870 9 000 380 3 000 11.9

57,2 40 1,7 5,40
FYJ 2.1/2 TF FYJ 513 YAR 213-208-2F 12 870 9 000 380 3 000 13.0
57,2 40 1,7 5,90
FY 2.11/16 TF FY 513 U YAR 213-211-2F 12 870 9 000 380 3 000 11.5

57,2 40 1,7 5,10
FY 2.3/4 TF FY 515 U YAR 215-212-2F 14 920 11 030 460 2 600 13.5

66,3 49 2,04 6,10
FY 2.15/16 TF FY 515 U YAR 215-215-2F 14 920 11 030 460 2 600 18.0

66,3 49 2,04 8,15
FYM 2.15/16 TF FY 516 U YAR 216-215-2F 16 380 11 930 490 2 400 17.5
72,8 53 2,16 8,00
FYM 3. TF FY 516 U YAR 216-300-2F 16 380 11 930 490 2 400 17.5

72,8 53 2,16 8,00
187
Flanged Y-bearing units with a cast housing with a square flange and an eccentric locking
collar, metric shafts
d 15 – 60 mm
A1
A2 N
3,2H14
s1
H11
d Da
B1
G
J
L
T
FM WF

d A1 A2 B1 Da J L N G s1 T C C0 Pu tolerance
h6
mm kN kN r/min –
15 26 11 28,6 55,6 54 76 11,5 10 22,1 39,1 9,56 4,75 0,2 9 500 FY 15 FM
17 26 11 28,6 55,6 54 76 11,5 10 22,1 39,1 9,56 4,75 0,2 9 500 FY 17 FM
20 29,5 11 31 68,3 63,5 86 11,5 10 23,5 42,5 12,7 6,55 0,28 8 500 FY 20 FM
29,5 11 43,7 68,3 63,5 86 11,5 10 26,6 45,6 12,7 6,55 0,28 8 500 FY 20 WF
25 30 12 31 74,6 70 95 11,5 10 23,5 42,5 14 7,8 0,335 7 000 FY 25 FM

30 12 44,4 74,6 70 95 11,5 10 26,9 45,6 14 7,8 0,335 7 000 FY 25 WF
30 32,5 13 35,7 93,7 82,5 108 11,5 10 26,7 46,7 19,5 11,2 0,475 6 300 FY 30 FM
32,5 13 48,4 93,7 82,5 108 11,5 10 30,1 50,1 19,5 11,2 0,475 6 300 FY 30 WF
35 34,5 13 38,9 106,4 92 118 14 12 29,4 50,4 25,5 15,3 0,655 5 300 FY 35 FM
34,5 13 51,1 106,4 92 118 14 12 32,3 53,3 25,5 15,3 0,655 5 300 FY 35 WF
40 38,5 14 43,7 115,9 101,5 130 14 12 32,7 56,7 30,7 19 0,8 4 800 FY 40 FM
38,5 14 56,3 115,9 101,5 130 14 12 34,9 58,9 30,7 19 0,8 4 800 FY 40 WF
45 39 14 43,7 119,1 105 137 16 14 32,7 56,7 33,2 21,6 0,915 4 300 FY 45 FM
39 14 56,3 119,1 105 137 16 14 34,9 58,9 33,2 21,6 0,915 4 300 FY 45 WF
50 43 15 43,7 125,4 111 143 18 16 32,7 60,7 35,1 23,2 0,98 4 000 FY 50 FM
43 15 62,7 125,4 111 143 18 16 38,1 66,1 35,1 23,2 0,98 4 000 FY 50 WF
55 47,5 16 48,4 150,8 130 162 18 16 36,4 67,4 43,6 29 1,25 3 600 FY 55 FM
47,5 16 71,4 150,8 130 162 18 16 43,6 74,6 43,6 29 1,25 3 600 FY 55 WF
60 52 17 53,1 161,9 143 175 18 16 39,6 73,6 52,7 36 1,53 3 400 FY 60 FM

52 17 77,8 161,9 143 175 18 16 46,8 80,8 52,7 36 1,53 3 400 FY 60 WF
188
A5

A5
4.4
– kg – mm
FY 15 FM FY 503 M YET 203/15 0,47 – –
FY 17 FM FY 503 M YET 203 0,48 – –
FY 20 FM FY 504 M YET 204 0,62 ECY 204 18,5

FY 20 WF FY 504 M YEL 204-2F 0,65 ECY 204 18,5
FY 25 FM FY 505 M YET 205 0,78 ECY 205 18

FY 25 WF FY 505 M YEL 205-2F 0,83 ECY 205 18
FY 30 FM FY 506 M YET 206 1,10 ECY 206 20

FY 30 WF FY 506 M YEL 206-2F 1,20 ECY 206 20
FY 35 FM FY 507 M YET 207 1,50 ECY 207 22

FY 35 WF FY 507 M YEL 207-2F 1,55 ECY 207 22
FY 40 FM FY 508 M YET 208 1,95 ECY 208 23,5

FY 40 WF FY 508 M YEL 208-2F 2,05 ECY 208 23,5
FY 45 FM FY 509 M YET 209 2,15 ECY 209 23

FY 45 WF FY 509 M YEL 209-2F 2,25 ECY 209 23
FY 50 FM FY 510 M YET 210 2,55 ECY 210 29,5

FY 50 WF FY 510 M YEL 210-2F 2,70 ECY 210 29,5
FY 55 FM FY 511 M YET 211 3,60 ECY 211 34

FY 55 WF FY 511 M YEL 211-2F 3,85 ECY 211 34
FY 60 FM FY 512 M YET 212 4,70 ECY 212 35,5

FY 60 WF FY 512 M YEL 212-2F 5,00 ECY 212 35,5
189
collar, inch shafts
d 5/8 – 1 3/4 in
A1
A2 N
3,2H14
s1
H11
d Da
B1
G
J
L
T
FM WF
Bearing unit
d A1 A2 B1 J L G s1 T
in/mm –
5/8 0.92 0.39 1.13 2.13 3.00 3/ 8 0.87 1.45 FY 5/8 FM

15,875 23,4 9,9 28,6 54 76,2 10 22,1 36,8
3/4 1.16 0.43 1.22 2.50 3.39 3/ 8 0.93 1.68 FY 3/4 FM
19,05 29,5 11 31 63,5 86 10 23,5 42,5
7/8 1.18 0.47 1.22 2.76 3.74 7/16 0.93 1.67 FY 7/8 FM
22,225 30 12 31 70 95 10 23,5 42,5
1 1.18 0.47 1.22 2.76 3.74 7/16 0.93 1.67 FY 1. FM

25,4 30 12 31 70 95 10 23,5 42,5
1.18 0.47 1.75 2.76 3.74 7/16 1.06 1.81 FY 1. WF
30 12 44,4 70 95 10 26,9 45,9
1 1/ 8 1.28 0.51 1.41 3.25 4.25 7/16 1.05 1.84 FY 1.1/8 FM

28,575 32,5 13 35,7 82,5 108 10 26,7 46,7
1 3/16 1.28 0.51 1.41 3.25 4.25 7/16 1.05 1.84 FY 1.3/16 FM
30,163 32,5 13 35,7 82,5 108 10 26,7 46,7
1 1/ 4 1.36 0.51 1.53 3.62 4.65 1/ 2 1.16 1.98 FY 1.1/4 FM

31,75 34,5 13 38,9 92 118 12 29,4 50,4
1.36 0.51 2.01 3.62 4.65 1/ 2 1.27 2.10 FY 1.1/4 WF
34,5 13 51,1 92 118 12 32,3 53,3
1 3/ 8 1.36 0.51 1.53 3.62 4.65 1/ 2 1.16 1.98 FY 1.3/8 FM

34,925 34,5 13 38,9 92 118 12 29,4 50,4
1 7/16 1.36 0.51 1.53 3.62 4.65 1/ 2 1.16 1.98 FY 1.7/16 FM

36,513 34,5 13 38,9 92 118 12 29,4 50,4
1 1/ 2 1.52 0.55 1.72 4.00 5.12 1/ 2 1.29 2.22 FY 1.1/2 FM

38,1 38,5 14 43,7 101,5 130 12 32,7 56,5
1.52 0.55 2.22 4.00 5.12 1/ 2 1.37 2.32 FY 1.1/2 WF
38,5 14 56,3 101,5 130 12 34,9 58,9
1 11/16 1.54 0.55 1.72 4.13 5.39 9/16 1.29 2.22 FY 1.11/16 FM
42,863 39 14 43,7 105 137 14 32,7 56,5
1 3/ 4 1.54 0.55 1.72 4.13 5.39 9/16 1.29 2.22 FY 1.3/4 FM

44,45 39 14 43,7 105 137 14 32,7 56,5
190
C C0
limit
Pu
with shaft
tolerance
unit 4.4
h6
FY 5/8 FM FY 503 U YET 203-010 2 150 1 070 50 9 500 1.05

9,56 4,75 0,2 0,47
FY 3/4 FM FY 504 U YET 204-012 2 860 1 470 60 8 500 1.40

12,7 6,55 0,28 0,63
FY 7/8 FM FY 505 U YET 205-014 3 150 1 760 80 7 000 1.80

14 7,8 0,335 0,81
FY 1. FM FY 505 U YET 205-100 3 150 1 760 80 7 000 1.70

14 7,8 0,335 0,78
FY 1. WF FY 505 U YEL 205-100-2F 3 150 1 760 80 7 000 1.80
14 7,8 0,335 0,82
FY 1.1/8 FM FY 506 U YET 206-102 4 390 2 520 110 6 300 2.50

19,5 11,2 0,475 1,10
FY 1.3/16 FM FY 506 U YET 206-103 4 390 2 520 110 6 300 2.45

19,5 11,2 0,475 1,10
FY 1.1/4 FM FY 507 U YET 207-104 5 740 3 440 150 5 300 3.40

25,5 15,3 0,655 1,55
FY 1.1/4 WF FY 507 U YEL 207-104-2F 5 740 3 440 150 5 300 3.55
25,5 15,3 0,655 1,60
FY 1.3/8 FM FY 507 U YET 207-106 5 740 3 440 150 5 300 3.25

25,5 15,3 0,655 1,50
FY 1.7/16 FM FY 507 U YET 207-107 5 740 3 440 150 5 300 3.20

25,5 15,3 0,655 1,45
FY 1.1/2 FM FY 508 U YET 208-108 6 910 4 280 180 4 800 4.40

30,7 19 0,8 2,00
FY 1.1/2 WF FY 508 U YEL 208-108-2F 6 910 4 280 180 4 800 4.65
30,7 19 0,8 2,10
FY 1.11/16 FM FY 509 U YET 209-111 7 470 4 860 210 4 300 4.85

33,2 21,6 0,915 2,20
FY 1.3/4 FM FY 509 U YET 209-112 7 470 4 860 210 4 300 4.75

33,2 21,6 0,915 2,15
191
collar, inch shafts
d 1 15/16 – 2 7/16 in
A1
A2 N
3,2H14
s1
H11
d Da
B1
G
J
L
T
FM WF
Bearing unit
d A1 A2 B1 J L G s1 T
in/mm –
1 15/16 1.69 0.59 1.72 4.37 5.63 9/16 1.29 2.39 FY 1.15/16 FM
49,213 43 15 43,7 111 143 14 32,7 60,7
1.69 0.59 2.47 4.37 5.63 9/16 1.50 2.60 FY 1.15/16 WF
43 15 62,7 111 143 14 38,1 66,1
2 1.87 0.63 1.91 5.12 6.38 5/ 8 1.43 2.65 FY 2. FM

50,8 47,5 16 48,4 130 162 16 36,4 67,4
2 3/16 1.87 0.63 1.91 5.12 6.38 5/ 8 1.43 2.65 FY 2.3/16 FM

55,563 47,5 16 48,4 130 162 16 36,4 67,4
1.87 0.63 2.81 5.12 6.38 5/ 8 1.72 2.94 FY 2.3/16 WF
47,5 16 71,4 130 162 16 43,6 74,6
2 7/16 2.05 0.67 3.06 5.63 6.89 5/ 8 1.84 3.18 FY 2.7/16 WF

61,913 52 17 77,8 143 175 16 46,8 80,8
192
C C0
limit
Pu
with shaft
tolerance
unit 4.4
h6
FY 1.15/16 FM FY 510 U YET 210-115 7 900 5 220 220 4 000 5.60

35,1 23,2 0,98 2,55
FY 1.15/16 WF FY 510 U YEL 210-115-2F 7 900 5 220 220 4 000 6.05
35,1 23,2 0,98 2,75
FY 2. FM FY 511 U YET 211-200 9 810 6 530 280 3 600 8.25

43,6 29 1,25 3,75
FY 2.3/16 FM FY 511 U YET 211-203 9 810 6 530 280 3 600 8,00

43,6 29 1,25 3,65
FY 2.3/16 WF FY 511 U YEL 211-203-2F 9 810 6 530 280 3 600 8.50
43,6 29 1,25 3,85
FY 2.7/16 WF FY 512 U YEL 212-207-2F 11 860 8 100 340 3 400 11.0

52,7 36 1,53 5,05
193
Flanged Y-bearing units with a cast housing with a square flange and an adapter sleeve,
metric shafts
d 20 – 60 mm
A1 N
H14
3,2
s1 H11
d Da
B1
G
J
A2 L
T

d A1 A2 B1 Da J L N G s1 T C C0 Pu
mm kN kN –
20 27 14 35 74,6 70 95 12 10 20 36 14 7,8 0,335 FYJ 25 KF H 2305
25 31 14 38 93,7 83 108 12 10 22 40 19,5 11,2 0,475 FYJ 30 KF H 2306
30 34 16 43 106,4 92 118 14 12 24,3 43,3 25,5 15,3 0,655 FYJ 35 KF H 2307
35 36 16 46 115,9 102 130 16 14 27 48 30,7 19 0,8 FYJ 40 KF H 2308
40 38 18 50 119,1 105 137 16 14 28,5 50,5 33,2 21,6 0,915 FYJ 45 KF H 2309
45 40 18 55 125,4 111 143 16 14 30,5 52,5 35,1 23,2 0,98 FYJ 50 KF H 2310
50 43 20 59 150,8 130 162 19 16 32,5 57,5 43,6 29 1,25 FYJ 55 KF H 2311
55 48 20 62 161,9 143 175 19 16 34,3 63,3 52,7 36 1,53 FYJ 60 KF H 2312
60 50 20 65 161,9 149 187 19 16 35,8 65,8 57,2 40 1,7 FYJ 65 KF H 2313
194
without
adapter sleeve
of the bearing unit
Housing Bearing
+ sleeve 4.5
– r/min kg
FYJ 25 KF FYJ 505 YSA 205-2FK 7 000 0,73
FYJ 30 KF FYJ 506 YSA 206-2FK 6 300 1,05
FYJ 35 KF FYJ 507 YSA 207-2FK 5 300 1,35
FYJ 40 KF FYJ 508 YSA 208-2FK 4 800 1,75
FYJ 45 KF FYJ 509 YSA 209-2FK 4 300 2,10
FYJ 50 KF FYJ 510 YSA 210-2FK 4 000 2,80
FYJ 55 KF FYJ 511 YSA 211-2FK 3 600 3,60
FYJ 60 KF FYJ 512 YSA 212-2FK 3 400 4,60
FYJ 65 KF FYJ 513 YSA 213-2FK 3 000 6,00
195
inch shafts
d 3/4 – 2 1/8 in
A1 N
H14
3,2
s1 H11
d Da
B1
G
J
A2 L
T
Bearing Adapter
unit sleeve
d A1 A2 B1 Da J L N G s1 T
in/mm –
3/4 1.06 0.55 1.38 2.94 2.76 3.74 0.47 3/8 0.79 1.42 FYJ 25 KF HE 2305
19,05 27 14 35 74,6 70 95 12 10 20 36
15/16 1.22 0.55 1.50 3.69 3.27 4.25 0.47 3/8 0.87 1.57 FYJ 30 KF HA 2306
23,813 31 14 38 93,7 83 108 12 10 22 40
1 1.22 0.55 1.50 3.69 3.27 4.25 0.47 3/8 0.87 1.57 FYJ 30 KF HE 2306
25,4 31 14 38 93,7 83 108 12 10 22 40
1 3/16 1.34 0.63 1.69 4.19 3.62 4.65 0.55 1/2 0.96 1.70 FYJ 35 KF HA 2307
30,163 34 16 43 106,4 92 118 14 12 24,3 43,3
1 1/ 4 1.42 0.63 1.81 4.56 4.02 5.12 0.63 9/16 1.06 1.89 FYJ 40 KF HE 2308
31,75 36 16 46 115,9 102 130 16 14 27 48
1 7/16 1.50 0.71 1.97 4.69 4.13 5.39 0.63 9/16 1.12 1.99 FYJ 45 KF HA 2309
36,513 38 18 50 119,1 105 137 16 14 28,5 50,5
1 1/ 2 1.50 0.71 1.97 4.69 4.13 5.39 0.63 9/16 1.12 1.99 FYJ 45 KF HE 2309
38,1 38 18 50 119,1 105 137 16 14 28,5 50,5
1 5/ 8 1.57 0.71 2.17 4.94 4.37 5.63 0.63 9/16 1.20 2.07 FYJ 50 KF HS 2310
41,275 40 18 55 125,4 111 143 16 14 30,5 52,5
1 11/16 1.57 0.71 2.17 4.94 4.37 5.63 0.63 9/16 1.20 2.07 FYJ 50 KF HA 2310
42,863 40 18 55 125,4 111 143 16 14 30,5 52,5
1 3/ 4 1.57 0.71 2.17 4.94 4.37 5.63 0.63 9/16 1.20 2.07 FYJ 50 KF HE 2310
44,45 40 18 55 125,4 111 143 16 14 30,5 52,5
1 15/16 1.69 0.79 2.32 5.94 5.12 6.38 0.75 5/8 1.28 2.26 FYJ 55 KF HA 2311
49,213 43 20 59 150,8 130 162 19 16 32,5 57,5
2 1.69 0.79 2.32 5.94 5.12 6.38 0.75 5/8 1.28 2.26 FYJ 55 KF HE 2311 B
50,8 43 20 59 150,8 130 162 19 16 32,5 57,5
2 1/ 8 1.89 0.79 2.44 6.37 5.63 6.89 0.75 5/8 1.35 2.49 FYJ 60 KF HS 2312
53,975 48 20 62 161,9 143 175 19 16 34,3 63,3
196
without
adapter sleeve
C C0
limit
Pu
+ sleeve 4.5
FYJ 25 KF FYJ 505 YSA 205-2FK 3 150 1 760 80 7 000 1.60

14 7,8 0,335 0,73
FYJ 30 KF FYJ 506 YSA 206-2FK 4 390 2 520 110 6 300 2.35
19,5 11,2 0,475 1,05
FYJ 30 KF FYJ 506 YSA 206-2FK 4 390 2 520 110 6 300 2.30
19,5 11,2 0,475 1,05
FYJ 35 KF FYJ 507 YSA 207-2FK 5 740 3 440 150 5 300 3.00
25,5 15,3 0,655 1,35
FYJ 40 KF FYJ 508 YSA 208-2FK 6 910 4 280 180 4 800 3.85
30,7 19 0,8 1,75
FYJ 45 KF FYJ 509 YSA 209-2FK 7 470 4 860 210 4 300 4.75
33,2 21,6 0,915 2,15
FYJ 45 KF FYJ 509 YSA 209-2FK 7 470 4 860 210 4 300 4.65
33,2 21,6 0,915 2,10
FYJ 50 KF FYJ 510 YSA 210-2FK 7 900 5 220 220 4 000 6.30
35,1 23,2 0,98 2,85
FYJ 50 KF FYJ 510 YSA 210-2FK 7 900 5 220 220 4 000 6.25
35,1 23,2 0,98 2,85
FYJ 50 KF FYJ 510 YSA 210-2FK 7 900 5 220 220 4 000 6.15
35,1 23,2 0,98 2,80
FYJ 55 KF FYJ 511 YSA 211-2FK 9 810 6 530 280 3 600 7.95
43,6 29 1,25 3,60
FYJ 55 KF FYJ 511 YSA 211-2FK 9 810 6 530 280 3 600 7.95
43,6 29 1,25 3,60
FYJ 60 KF FYJ 512 YSA 212-2FK 11 860 8 100 340 3 400 10.0
52,7 36 1,53 4,60
197
inch shafts
d 2 3/16 – 2 3/8 in
A1 N
H14
3,2
s1 H11
d Da
B1
G
J
A2 L
T
Bearing Adapter
unit sleeve
d A1 A2 B1 Da J L N G s1 T
in/mm –
2 3/16 1.97 0.79 2.56 6.37 5.87 7.36 0.75 5/8 1.41 2.59 FYJ 65 KF HA 2313
55,563 50 20 65 161,9 149 187 19 16 35,8 65,8
2 1/ 4 1.97 0.79 2.56 6.37 5.87 7.36 0.75 5/8 1.41 2.59 FYJ 65 KF HE 2313
57,15 50 20 65 161,9 149 187 19 16 35,8 65,8
2 3/ 8 1.97 0.79 2.56 6.37 5.87 7.36 0.75 5/8 1.41 2.59 FYJ 65 KF HS 2313
60,325 50 20 65 161,9 149 187 19 16 35,8 65,8
198
without
adapter sleeve
C C0
limit
Pu
+ sleeve 4.5
FYJ 65 KF FYJ 513 YSA 213-2FK 12 870 9 000 380 3 000 13.5
57,2 40 1,7 6,20
FYJ 65 KF FYJ 513 YSA 213-2FK 12 870 9 000 380 3 000 13.5
57,2 40 1,7 6,10
FYJ 65 KF FYJ 513 YSA 213-2FK 12 870 9 000 380 3 000 13.5
57,2 40 1,7 6,00
199
Flanged Y-bearing units with a cast housing with an oval flange and grub screws,
metric shafts
d 12 – 50 mm A1
A2 N
3,2H14
s1
H11
d Da J H
B
TF T TR L

d A1 A2 B Da H J L N G s1 T C C0 Pu tolerance
h6
mm kN kN r/min –
12 26 11 27,4 50,8 98,5 76,5 57 11,5 10 15,9 32,9 9,56 4,75 0,2 9 500 FYTB 12 TF
15 26 11 27,4 50,8 98,5 76,5 57 11,5 10 15,9 32,9 9,56 4,75 0,2 9 500 FYTB 15 TF
17 26 11 27,4 50,8 98,5 76,5 57 11,5 10 15,9 32,9 9,56 4,75 0,2 9 500 FYTB 17 TF
20 29,5 11 31 50,8 112 90 60,5 11,5 10 18,3 37,3 12,7 6,55 0,28 8 500 FYTB 20 TF
25,5 12 31 50,8 112 90 60 12 10 18,3 33,3 12,7 6,55 0,28 8 500 FYTJ 20 TF
29,5 11 31 50,8 112 90 60,5 11,5 10 18,3 37,3 12,7 6,55 0,28 5 000 FYTB 20 TR
25 30 12 34,1 63,5 124 99 70 11,5 10 19,8 38,8 14 7,8 0,335 7 000 FYTB 25 TF
27 14 34,1 63,5 130 99 68 16 14 19,8 35,8 14 7,8 0,335 7 000 FYTJ 25 TF
30 12 34,1 63,5 124 99 70 11,5 10 19,8 38,8 14 7,8 0,335 4 300 FYTB 25 TR
30 32,5 13 38,1 76,2 141,5 116,5 83 11,5 10 22,2 42,2 19,5 11,2 0,475 6 300 FYTB 30 TF
30,5 13,5 38,1 76,2 148 117 80 16 14 22,2 40,2 19,5 11,2 0,475 6 300 FYTJ 30 TF
32,5 13 38,1 76,2 141,5 116,5 83 11,5 10 22,2 42,2 19,5 11,2 0,475 3 800 FYTB 30 TR
35 34,5 13 42,9 88,9 156 130 96 14 12 25,4 46,4 25,5 15,3 0,655 5 300 FYTB 35 TF
34 16 42,9 88,9 161 130 96 16 14 25,4 44,4 25,5 15,3 0,655 5 300 FYTJ 35 TF
34,5 13 42,9 88,9 156 130 96 14 12 25,4 46,4 25,5 15,3 0,655 3 200 FYTB 35 TR
40 38,5 14 49,2 88,9 171,5 143,5 102 14 12 30,2 54,2 30,7 19 0,8 4 800 FYTB 40 TF
36 16 49,2 88,9 175 144 100 16 14 30,2 51,2 30,7 19 0,8 4 800 FYTJ 40 TF
38,5 14 49,2 88,9 171,5 143,5 102 14 12 30,2 54,2 30,7 19 0,8 2 800 FYTB 40 TR
45 39 14 49,2 98,4 178,5 148,5 111 16 14 30,2 54,2 33,2 21,6 0,915 4 300 FYTB 45 TF
38 18 49,2 98,4 188 148 108 19 16 30,2 52,2 33,2 21,6 0,915 4 300 FYTJ 45 TF
39 14 49,2 98,4 178,5 148,5 111 16 14 30,2 54,2 33,2 21,6 0,915 2 400 FYTB 45 TR
50 43 15 51,6 101,6 189 157 116 18 16 32,6 60,6 35,1 23,2 0,98 4 000 FYTB 50 TF
40 18 51,6 101,6 195 157 115 19 16 32,6 54,6 35,1 23,2 0,98 4 000 FYTJ 50 TF
43 15 51,6 101,6 189 157 116 18 16 32,6 60,6 35,1 23,2 0,98 2 200 FYTB 50 TR
200
A5

A5
4.6
– kg – mm
FYTB 12 TF FYTB 503 M YAR 203/12-2F 0,42 – –
FYTB 15 TF FYTB 503 M YAR 203/15-2F 0,40 – –
FYTB 17 TF FYTB 503 M YAR 203-2F 0,39 – –
FYTB 20 TF FYTB 504 M YAR 204-2F 0,50 ECY 204 18,5

FYTJ 20 TF FYTJ 504 YAR 204-2F 0,43 – –
FYTB 20 TR FYTB 504 M YAR 204-2RF 0,50 ECY 204 18,5
FYTB 25 TF FYTB 505 M YAR 205-2F 0,63 ECY 205 18

FYTJ 25 TF FYTJ 505 YAR 205-2F 0,58 – –
FYTB 25 TR FYTB 505 M YAR 205-2RF 0,63 ECY 205 18

FYTJ 30 TF FYTJ 506 YAR 206-2F 0,93 – –

FYTJ 35 TF FYTJ 507 YAR 207-2F 1,15 – –

FYTJ 40 TF FYTJ 508 YAR 208-2F 1,55 – –

FYTJ 45 TF FYTJ 509 YAR 209-2F 2,20 – –

FYTJ 50 TF FYTJ 510 YAR 210-2F 3,10 – –
201
inch shafts
d 1/2 – 1 1/8 in A1
A2 N
3,2H14
s1
H11
d Da J H
B
TF T RM L
Bearing unit
d A1 A2 B H J L N G s1 T
in/mm –
1/2 0.92 0.45 0.89 3.88 3.00 2.13 0.44 3/8 0.63 1.20 FYT 1/2 RM
12,7 23,4 11,5 22,5 98,5 76,2 54 11,1 10 16 30,6
0.92 0.45 1.08 3.88 3.00 2.13 0.44 3/8 0.63 1.20 FYT 1/2 TF
23,4 11,5 27,4 98,5 76,2 54 11,1 10 15,9 30,6
5/8 0.92 0.45 0.89 3.88 3.00 2.13 0.44 3/8 0.63 1.20 FYT 5/8 RM
15,875 23,4 11,5 22,5 98,5 76,2 54 11,1 10 16 30,6
0.92 0.45 1.08 3.88 3.00 2.13 0.44 3/8 0.63 1.20 FYT 5/8 TF
23,4 11,5 27,4 98,5 76,2 54 11,1 10 15,9 30,6
3/4 0.97 0.44 1.00 4.41 3.53 2.38 0.44 3/8 0.72 1.28 FYT 3/4 RM
19,05 24,6 11,1 25,5 111,9 89,7 60,5 11,1 10 18,3 32,6
0.97 0.44 1.22 4.41 3.53 2.38 0.44 3/8 0.72 1.28 FYT 3/4 TF/AH
24,6 11,1 31 111,9 89,7 60,5 11,1 10 18,3 32,6
1.16 0.43 1.22 4.41 3.54 2.38 0.45 3/8 0.72 1.47 FYTB 3/4 TF
29,5 11 31 112 90 60,5 11,5 10 18,3 37,3
1.00 0.47 1.22 4.41 3.54 2.36 0.47 3/8 0.72 1.31 FYTJ 3/4 TF
25,5 12 31 112 90 60 12 10 18,3 33,3
7/8 1.18 0.47 1.34 4.88 3.89 2.76 0.50 7/16 0.78 1.53 FYT 7/8 TF
22,225 30 12 34,1 124 98,8 70 12,7 11 19,8 38,8
15/16 1.18 0.47 1.07 4.88 3.89 2.76 0.50 7/16 0.77 1.53 FYT 15/16 RM
23,813 30 12 27,2 124 98,8 70 12,7 11 19,5 38,8
1.18 0.47 1.34 4.88 3.89 2.76 0.50 7/16 0.78 1.53 FYT 15/16 TF
30 12 34,1 124 98,8 70 12,7 10 19,8 38,8
1 1.18 0.47 1.07 4.88 3.89 2.76 0.50 7/16 0.77 1.53 FYT 1. RM
25,4 30 12 27,2 124 98,8 70 12,7 10 19,5 38,8
1.18 0.47 1.34 4.88 3.89 2.76 0.50 7/16 0.78 1.53 FYT 1. TF
30 12 34,1 124 98,8 70 12,7 10 19,8 38,8
1.18 0.47 1.34 4.88 3.90 2.76 0.45 3/8 0.78 1.53 FYTB 1. TF
30 12 34,1 124 99 70 11,5 10 19,8 38,8
1.06 0.55 1.34 5.12 3.90 2.68 0.63 9/16 0.78 1.41 FYTJ 1. TF
27 14 34,1 130 99 68 16 14 19,8 35,8
1 1/ 8 1.28 0.51 1.50 5.57 4.60 3.27 0.50 7/16 0.87 1.66 FYT 1.1/8 TF
28,575 32,5 13 38,1 141,5 116,9 83 12,7 10 22,2 42,2
202
C C0
limit
Pu
with shaft
tolerance
unit 4.6
h6
– lbs/kN lbs/kN r/min lb/kg
FYT 1/2 RM FYT 503 U YAT 203-008 2 150 1 070 50 9 500 0.68
9,56 4,75 0,2 0,31
FYT 1/2 TF FYT 503 U YAR 203-008-2F 2 150 1 070 50 9 500 0.73
9,56 4,75 0,2 0,33
FYT 5/8 RM FYT 503 U YAT 203-010 2 150 1 070 50 9 500 0.66
9,56 4,75 0,2 0,30
FYT 5/8 TF FYT 503 U YAR 203-010-2F 2 150 1 070 50 9 500 0.68
9,56 4,75 0,2 0,31
FYT 3/4 RM FYT 504 U YAT 204-012 2 860 1 470 60 8 500 1.05
12,7 6,55 0,28 0,47
FYT 3/4 TF/AH FYT 504 U/AH YAR 204-012-2F/AH 2 860 1 470 60 8 500 1.10
12,7 6,55 0,28 0,50
FYTB 3/4 TF FYTB 504 M YAR 204-012-2F 2 860 1 470 60 8 500 1.10
12,7 6,55 0,28 0,50
FYTJ 3/4 TF FYTJ 504 YAR 204-012-2F 2 860 1 470 60 8 500 0.95
12,7 6,55 0,28 0,43
FYT 7/8 TF FYT 505 U YAR 205-014-2F 3 150 1 760 80 7 000 1.45
14 7,8 0,335 0,66
FYT 15/16 RM FYT 505 U YAT 205-015 3 150 1 760 80 7 000 1.35
14 7,8 0,335 0,61
FYT 15/16 TF FYT 505 U YAR 205-015-2F 3 150 1 760 80 7 000 1.40
14 7,8 0,335 0,64
FYT 1. RM FYT 505 U YAT 205-100 3 150 1 760 80 7 000 1.30

14 7,8 0,335 0,60
FYT 1. TF FYT 505 U YAR 205-100-2F 3 150 1 760 80 7 000 1.30
14 7,8 0,335 0,60
FYTB 1. TF FYTB 505 M YAR 205-100-2F 3 150 1 760 80 7 000 1.40
14 7,8 0,335 0,63
FYTJ 1. TF FYTJ 505 YAR 205-100-2F 3 150 1 760 80 7 000 1.30
14 7,8 0,335 0,58
FYT 1.1/8 TF FYT 506 U YAR 206-102-2F 4 390 2 520 110 6 300 2.10
19,5 11,2 0,475 0,95
203
inch shafts
d 1 3/16 – 1 11/16 in A1
A2 N
3,2H14
s1
H11
d Da J H
B
TF T RM L
Bearing unit
in/mm –
1 3/16 1.28 0.51 1.22 5.57 4.60 3.27 0.50 7/16 0.87 1.66 FYT 1.3/16 RM
30,163 32,5 13 31 141,5 116,9 83 12,7 10 22 42,2
1.28 0.51 1.50 5.57 4.60 3.27 0.50 7/16 0.87 1.66 FYT 1.3/16 TF
32,5 13 38,1 141,5 116,9 83 12,7 10 22,2 42,2
1 1/ 4 1.36 0.51 1.38 6.14 5.13 3.78 0.56 1/2 1.00 1.83 FYT 1.1/4 RM
31,75 34,5 13 35 156 130,2 96 14,3 12 25,5 46,4
1.36 0.51 1.69 6.14 5.12 3.78 0.55 1/2 1.00 1.83 FYTB 1.1/4 TF
34,5 13 42,9 156 130 96 14 12 25,4 46,4
1.34 0.63 1.69 6.34 5.12 3.78 0.63 9/16 1.00 1.75 FYTJ 1.1/4 TF
34 16 42,9 161 130 96 16 14 25,4 44,4
1 5/16 1.36 0.51 1.69 6.14 5.13 3.78 0.56 1/2 1.00 1.83 FYT 1.5/16 TF
33,338 34,5 13 42,9 156 130,2 96 14,3 12 25,4 46,4
1 3/ 8 1.36 0.51 1.38 6.14 5.13 3.78 0.56 1/2 1.00 1.83 FYT 1.3/8 RM
34,925 34,5 13 35 156 130,2 96 14,3 12 25,5 46,4
1.36 0.51 1.69 6.14 5.13 3.78 0.56 1/2 1.00 1.83 FYT 1.3/8 TF
34,5 13 42,9 156 130,2 96 14,3 12 25,4 46,4
1 7/16 1.36 0.51 1.38 6.14 5.13 3.78 0.56 1/2 1.00 1.83 FYT 1.7/16 RM
36,513 34,5 13 35 156 130,2 96 14,3 12 25,5 46,4
1.36 0.51 1.69 6.14 5.13 3.78 0.56 1/2 1.00 1.83 FYT 1.7/16 TF
34,5 13 42,9 156 130,2 96 14,3 12 25,4 46,4
1 1/ 2 1.52 0.55 1.57 6.75 5.66 4.02 0.56 1/2 1.12 2.07 FYT 1.1/2 RM
38,1 38,5 14 40 171,5 143,7 102 14,3 12 28,5 52,6
1.52 0.55 1.94 6.75 5.66 4.02 0.56 1/2 1.19 2.13 FYT 1.1/2 TF
38,5 14 49,2 171,5 143,7 102 14,3 12 30,2 54,2
1.52 0.55 1.94 6.75 5.65 4.02 0.55 1/2 1.19 2.13 FYTB 1.1/2 TF
38,5 14 49,2 171,5 143,5 102 14 12 30,2 54,2
1.42 0.63 1.94 6.89 5.67 3.94 0.63 9/16 1.19 2.02 FYTJ 1.1/2 TF
36 16 49,2 175 144 100 16 14 30,2 51,2
1 5/ 8 1.54 0.55 1.94 7.03 5.84 4.37 0.63 9/16 1.19 2.13 FYT 1.5/8 TF
41,275 39 14 49,2 178,5 148,4 111 15,9 14 30,2 54,2
1 11/16 1.54 0.55 1.63 7.03 5.84 4.37 0.63 9/16 1.20 2.13 FYT 1.11/16 RM
42,863 39 14 41,5 178,5 148,4 111 15,9 14 30,5 54,2
1.54 0.55 1.94 7.03 5.84 4.37 0.63 9/16 1.19 2.13 FYT 1.11/16 TF
39 14 49,2 178,5 148,4 111 15,9 14 30,2 54,2
204
C C0
limit
Pu
with shaft
tolerance
unit 4.6
h6
FYT 1.3/16 RM FYT 506 U YAT 206-103 4 390 2 520 110 6 300 1.95
19,5 11,2 0,475 0,88
FYT 1.3/16 TF FYT 506 U YAR 206-103-2F 4 390 2 520 110 6 300 2.05
19,5 11,2 0,475 0,93
FYT 1.1/4 RM FYT 507 U YAT 207-104 5 740 3 440 150 5 300 2.65
25,5 15,3 0,655 1,21
FYTB 1.1/4 TF FYTB 507 U YAR 207-104-2F 5 740 3 440 150 5 300 3.10
25,5 15,3 0,655 1,40
FYTJ 1.1/4 TF FYTJ 507 U YAR 207-104-2F 5 740 3 440 150 5 300 2.85
25,5 15,3 0,655 1,30
FYT 1.5/16 TF FYT 507 U YAR 207-105-2F 5 740 3 440 150 5 300 2.85
25,5 15,3 0,655 1,30
FYT 1.3/8 RM FYT 507 U YAT 207-106 5 740 3 440 150 5 300 2.60
25,5 15,3 0,655 1,15
FYT 1.3/8 TF FYT 507 U YAR 207-106-2F 5 740 3 440 150 5 300 2.80
25,5 15,3 0,655 1,27
FYT 1.7/16 RM FYT 507 U YAT 207-107 5 740 3 440 150 5 300 2.50
25,5 15,3 0,655 1,14
FYT 1.7/16 TF FYT 507 U YAR 207-107-2F 5 740 3 440 150 5 300 2.75
25,5 15,3 0,655 1,25
FYT 1.1/2 RM FYT 508 U YAT 208-108 6 910 4 280 180 4 800 3.55
30,7 19 0,8 1,60
FYT 1.1/2 TF FYT 508 U YAR 208-108-2F 6 910 4 280 180 4 800 3.60
30,7 19 0,8 1,70
FYTB 1.1/2 TF FYTB 508 M YAR 208-108-2F 6 910 4 280 180 4 800 3.75
30,7 19 0,8 1,70
FYTJ 1.1/2 TF FYTJ 508 YAR 208-108-2F 6 910 4 280 180 4 800 3.55
30,7 19 0,8 1,60
FYT 1.5/8 TF FYT 509 U YAR 209-110-2F 7 470 4 860 210 4 300 4.20
33,2 21,6 0,915 1,90
FYT 1.11/16 RM FYT 509 U YAT 209-111 7 470 4 860 210 4 300 3.85
33,2 21,6 0,915 1,74
FYT 1.11/16 TF FYT 509 U YAR 209-111-2F 7 470 4 860 210 4 300 4.10
33,2 21,6 0,915 1,86
205
inch shafts
d 1 3/4 – 2 3/16 in A1
A2 N
H14
3,2
s1
H11
d Da J H
B
TF T RM L
Bearing unit
in/mm –
1 3/ 4 1.54 0.55 1.63 7.03 5.84 4.37 0.63 9/16 1.20 2.13 FYT 1.3/4 RM
44,45 39 14 41,5 178,5 148,4 111 15,9 14 30,5 54,2
1.54 0.55 1.94 7.03 5.84 4.37 0.63 9/16 1.19 2.13 FYT 1.3/4 TF
39 14 49,2 178,5 148,4 111 15,9 14 30,2 54,2
1.54 0.55 1.94 7.03 5.85 4.37 0.63 9/16 1.19 2.13 FYTB 1.3/4 TF
39 14 49,2 178,5 148,5 111 16 14 30,2 54,2
1.50 0.71 1.94 7.40 5.83 4.25 0.75 5/8 1.19 2.06 FYTJ 1.3/4 TF
38 18 49,2 188 148 108 19 16 30,2 52,2
1 15/16 1.69 0.59 1.69 7.44 6.19 4.57 0.63 9/16 1.26 2.37 FYT 1.15/16 RM
49,213 43 15 43 189 157,2 116 15,9 14 32 60,1
1.69 0.59 2.03 7.44 6.19 4.57 0.63 9/16 1.28 2.39 FYT 1.15/16 TF
43 15 51,6 189 157,2 116 15,9 14 32,6 60,6
2 1.88 0.81 1.77 8.50 7.25 5.00 0.75 5/8 1.28 2.45 FYT 2. RM
50,8 47,6 20,6 45 216 184,2 127 19 16 32,5 62,3
1.88 0.81 2.19 8.50 7.25 5.00 0.75 5/8 1.32 2.47 FYT 2. TF
47,6 20,6 55,6 216 184,2 127 19 16 33,4 62,8
2 3/16 1.88 0.81 1.77 8.50 7.25 5.00 0.75 5/8 1.28 2.45 FYT 2.3/16 RM
55,563 47,6 20,6 45 216 184,2 127 19 16 32,5 62,3
1.88 0.81 2.19 8.50 7.25 5.00 0.75 5/8 1.32 2.47 FYT 2.3/16 TF
47,6 20,6 55,6 216 184,2 127 19 16 33,4 62,8
206
C C0
limit
Pu
with shaft
tolerance
unit 4.6
h6
FYT 1.3/4 RM FYT 509 U YAT 209-112 7 470 4 860 210 4 300 3.75
33,2 21,6 0,915 1,70
FYT 1.3/4 TF FYT 509 U YAR 209-112-2F 7 470 4 860 210 4 300 3.95
33,2 21,6 0,915 1,80
FYTB 1.3/4 TF FYTB 509 M YAR 209-112-2F 7 470 4 860 210 4 300 3.95
33,2 21,6 0,915 1,80
FYTJ 1.3/4 TF FYTJ 509 YAR 209-112-2F 7 470 4 860 210 4 300 4.85
33,2 21,6 0,915 2,20
FYT 1.15/16 RM FYT 510 U YAT 210-115 7 900 5 220 220 4 000 4.65
35,1 23,2 0,98 2,10
FYT 1.15/16 TF FYT 510 U YAR 210-115-2F 7 900 5 220 220 4 000 4.95
35,1 23,2 0,98 2,25
FYT 2. RM FYT 511 U YAT 211-200 9 810 6 530 280 3 600 7.30
43,6 29 1,25 3,30
FYT 2. TF FYT 511 U YAR 211-200-2F 9 810 6 530 280 3 600 7.60
43,6 29 1,25 3,45
FYT 2.3/16 RM FYT 511 U YAT 211-203 9 810 6 530 280 3 600 6.90
43,6 29 1,25 3,10
FYT 2.3/16 TF FYT 511 U YAR 211-203-2F 9 810 6 530 280 3 600 7.20
43,6 29 1,25 3,25
207
Flanged Y-bearing units with a cast housing with an oval flange and an eccentric locking collar,
metric shafts
d 15 – 50 mm A1
A2 N
3,2H14
s1
H11
d Da J H
B1
FM T W F L

d A1 A2 B1 Da H J L N G s1 T C C0 Pu tolerance
h6
mm kN kN r/min –
15 26 11 28,6 50,8 98,5 76,5 57 11,5 10 22,1 39,1 9,56 4,75 0,2 9 500 FYTB 15 FM
17 26 11 28,6 50,8 98,5 76,5 57 11,5 10 22,1 39,1 9,56 4,75 0,2 9 500 FYTB 17 FM
20 29,5 11 31 50,8 112 90 60,5 11,5 10 23,5 42,5 12,7 6,55 0,28 8 500 FYTB 20 FM
29,5 11 43,7 50,8 112 90 60,5 11,5 10 26,6 45,6 12,7 6,55 0,28 8 500 FYTB 20 WF
25 30 12 31 63,5 124 99 70 11,5 10 23,5 42,5 14 7,8 0,335 7 000 FYTB 25 FM

30 12 44,4 63,5 124 99 70 11,5 10 26,9 45,9 14 7,8 0,335 7 000 FYTB 25 WF
30 32,5 13 35,7 76,2 141,5 116,5 83 11,5 10 26,7 46,7 19,5 11,2 0,475 6 300 FYTB 30 FM
32,5 13 48,4 76,2 141,5 116,5 83 11,5 10 30,1 50,1 19,5 11,2 0,475 6 300 FYTB 30 WF
35 34,5 13 38,9 88,9 156 130 96 14 12 29,4 50,4 25,5 15,3 0,655 5 300 FYTB 35 FM
34,5 13 51,1 88,9 156 130 96 14 12 32,3 53,3 25,5 15,3 0,655 5 300 FYTB 35 WF
40 38,5 14 43,7 88,9 171,5 143,5 102 14 12 32,7 56,7 30,7 19 0,8 4 800 FYTB 40 FM
38,5 14 56,3 88,9 171,5 143,5 102 14 12 34,9 58,9 30,7 19 0,8 4 800 FYTB 40 WF
45 39 14 43,7 98,4 178,5 148,5 111 16 14 32,7 56,7 33,2 21,6 0,915 4 300 FYTB 45 FM
39 14 56,3 98,4 178,5 148,5 111 16 14 34,9 58,9 33,2 21,6 0,915 4 300 FYTB 45 WF
50 43 15 43,7 101,6 189 157 116 18 16 32,7 60,7 35,1 23,2 0,98 4 000 FYTB 50 FM
43 15 62,7 101,6 189 157 116 18 16 38,1 66,1 35,1 23,2 0,98 4 000 FYTB 50 WF
208
A5

A5
4.7
– kg – mm
FYTB 15 FM FYTB 503 M YET 203/15 0,42 – –
FYTB 17 FM FYTB 503 M YET 203 0,41 – –
FYTB 20 FM FYTB 504 M YET 204 0,52 ECY 204 18,5

FYTB 20 WF FYTB 504 M YEL 204-2F 0,55 ECY 204 18,5
FYTB 25 FM FYTB 505 M YET 205 0,64 ECY 205 18

FYTB 25 WF FYTB 505 M YEL 205-2F 0,69 ECY 205 18





209
inch shafts
d 1/2 – 1 15/16 in A1
A2 N
H14
3,2
s1
H11
d Da J H
B1
T L
Bearing unit
d A1 A2 B1 H J L N G s1 T
in/mm –
1/2 0.92 0.45 1.13 3.88 3.00 2.13 0.44 3/ 8 0.87 1.45 FYT 1/2 FM
12,7 23,4 11,5 26,6 98,5 76,2 54 11,1 10 22,1 36,8
5/8 0.92 0.45 1.13 3.88 3.00 2.13 0.44 3/ 8 0.87 1.45 FYT 5/8 FM
15,875 23,4 11,5 28,6 98,5 76,2 54 11,1 10 22,1 36,8
3/4 0.97 0.44 1.22 4.41 3.53 2.38 0.44 3/ 8 0.93 1.49 FYT 3/4 FM
19,05 24,6 11,1 31 112 89,7 60,3 11,1 10 23,5 37,8
7/8 1.18 0.47 1.22 4.88 3.89 2.76 0.50 7/16 0.93 1.67 FYT 7/8 FM
22,225 30 12 31 124 98,8 70 12,7 10 23,5 42,5
15/16 1.18 0.47 1.22 4.88 3.89 2.76 0.50 7/16 0.93 1.67 FYT 15/16 FM
23,813 30 12 31 124 98,8 70 12,7 10 23,5 42,5
1 1.18 0.47 1.22 4.88 3.89 2.76 0.50 7/16 0.93 1.67 FYT 1. FM
25,4 30 12 31 124 98,8 70 12,7 10 23,5 42,5
1 1/ 8 1.28 0.51 1.41 5.57 4.59 3.27 0.50 7/16 1.05 1.84 FYT 1.1/8 FM
28,575 32,5 13 35,7 141,5 116,9 83 12,7 10 26,7 46,7
1 3/16 1.28 0.51 1.41 5.57 4.59 3.27 0.50 7/16 1.05 1.84 FYT 1.3/16 FM
30,163 32,5 13 35,7 141,5 116,9 83 12,7 10 26,7 46,7
1 1/ 4 1.36 0.51 1.53 6.14 5.13 3.78 0.56 1/ 2 1.16 1.98 FYT 1.1/4 FM
31,75 34,5 13 38,9 156 130,2 96 14,3 12 29,4 50,4
1 3/ 8 1.36 0.51 1.53 6.14 5.13 3.78 0.56 1/ 2 1.16 1.98 FYT 1.3/8 FM
34,925 34,5 13 38,9 156 130,2 96 14,3 12 29,4 50,4
1 7/16 1.36 0.51 1.53 6.14 5.13 3.78 0.56 1/ 2 1.16 1.98 FYT 1.7/16 FM
36,513 34,5 13 38,9 156 130,2 96 14,3 12 29,4 50,4
1 1/ 2 1.52 0.55 1.72 6.75 5.66 4.02 0.56 1/ 2 1.29 2.24 FYT 1.1/2 FM
38,1 38,5 14 43,7 171,5 143,7 102 14,3 12 32,7 56,5
1 3/ 4 1.54 0.55 1.72 7.03 5.84 4.37 0.63 9/16 1.29 2.23 FYT 1.3/4 FM
44,45 39 14 43,7 178,5 148,4 111 15,9 14 32,7 56,7
1 15/16 1.69 0.59 1.72 7.44 6.19 4.57 0.63 9/16 1.29 2.39 FYT 1.15/16 FM
49,213 43 15 43,7 189 157,2 116 15,9 14 32,7 60,7
210
C C0
limit
Pu
with shaft
tolerance
unit 4.7
h6
FYT 1/2 FM FYT 503 U YET 203-008 2 150 1 070 50 9 500 0.77
9,56 4,75 0,2 0,35
FYT 5/8 FM FYT 503 U YET 203-010 2 150 1 070 50 9 500 0.75
9,56 4,75 0,2 0,34
FYT 3/4 FM FYT 504 U YET 204-012 2 860 1 470 60 8 500 1.15
12,7 6,55 0,28 0,53
FYT 7/8 FM FYT 505 U YET 205-014 3 150 1 760 80 7 000 1.45
14 7,8 0,335 0,67
FYT 15/16 FM FYT 505 U YET 205-015 3 150 1 760 80 7 000 1.45
14 7,8 0,335 0,66
FYT 1. FM FYT 505 U YET 205-100 3 150 1 760 80 7 000 1.40

14 7,8 0,335 0,64
FYT 1.1/8 FM FYT 506 U YET 206-102 4 390 2 520 110 6 300 2.15
19,5 11,2 0,475 0,98
FYT 1.3/16 FM FYT 506 U YET 206-103 4 390 2 520 110 6 300 2.15
19,5 11,2 0,475 0,97
FYT 1.1/4 FM FYT 507 U YET 207-104 5 740 3 440 150 5 300 3.10
25,5 15,3 0,655 1,40
FYT 1.3/8 FM FYT 507 U YET 207-106 5 740 3 440 150 5 300 2.95
25,5 15,3 0,655 1,35
FYT 1.7/16 FM FYT 507 U YET 207-107 5 740 3 440 150 5 300 2.90
25,5 15,3 0,655 1,30
FYT 1.1/2 FM FYT 508 U YET 208-108 6 910 4 280 180 4 800 3.80
30,7 19 0,8 1,75
FYT 1.3/4 FM FYT 509 U YET 209-112 7 470 4 860 210 4 300 4.10
33,2 21,6 0,915 1,85
FYT 1.15/16 FM FYT 510 U YET 210-115 7 900 5 220 220 4 000 5.05
35,1 23,2 0,98 2.30
211
inch shafts
d 2 – 2 3/16 in A1
A2 N
3,2H14
s1
H11
d Da J H
B1
T L
Bearing unit
d A1 A2 B1 H J L N G s1 T
in/mm –
2 1.88 0.81 1.91 8.50 7.25 5.00 0.75 5/ 8 1.43 2.59 FYT 2. FM
50,8 47,6 20,6 48,4 216 184,2 127 19,0 16 36,4 65,8
2 3/16 1.88 0.81 1.91 8.50 7.25 5.00 0.75 5/ 8 1.43 2.59 FYT 2.3/16 FM
55,563 47,6 20,6 48,4 216 184,2 127 19,0 16 36,4 65,8
212
C C0
limit
Pu
with shaft
tolerance
unit 4.7
h6
FYT 2. FM FYT 511 U YET 211-200 9 810 6 530 280 3 600 7.60
43,6 29 1,25 3,45
FYT 2.3/16 FM FYT 511 U YET 211-203 9 810 6 530 280 3 600 7.35
43,6 29 1,25 3,35
213
Flanged Y-bearing units with a cast housing with an oval flange and an adapter sleeve,
metric shafts
d 20 – 45 mm A1 N
3,2H14
s1 H11
d Da J H
B1
A2 L

d A1 A2 B1 Da H J L N G s1 T C C0 Pu
mm kN kN –
20 27 14 35 63,5 130 99 68 16 14 20 36 14 7,8 0,335 FYTJ 25 KF H 2305
25 30,5 13,5 38 76,2 148 117 80 16 14 22 40 19,5 11,2 0,475 FYTJ 30 KF H 2306
30 34 16 43 88,9 161 130 96 16 14 24,3 43,3 25,5 15,3 0,655 FYTJ 35 KF H 2307
35 36 16 46 88,9 175 144 100 16 14 27 48 30,7 19 0,8 FYTJ 40 KF H 2308
40 38 18 50 98,4 188 148 108 19 16 28,5 50,5 33,2 21,6 0,915 FYTJ 45 KF H 2309
45 40 18 55 101,6 195 157 115 19 16 30,5 52,5 35,1 23,2 0,98 FYTJ 50 KF H 2310
214
without
adapter sleeve
of the bearing unit
Housing Bearing
+ sleeve 4.8
– r/min kg
FYTJ 25 KF FYTJ 505 YSA 205-2FK 7 000 0,72
215
Flanged Y-bearing units with a cast housing with an oval flange and an adapter sleeve,
inch shafts
d 3/4 – 1 3/4 in
A1 N
3,2H14
s1 H11
d Da J H
B1
A2 L
Bearing Adapter
unit sleeve
d A1 A2 B1 Da H J L N G s1 T
in/mm –
3/4 1.06 0.55 1.38 2.50 5.12 3.90 2.68 0.63 9/16 0.79 1.42 FYTJ 25 KF HE 2305
19,05 27 14 35 63,5 130 99 68 16 14 20 36
15/16 1.20 0.53 1.50 3.00 5.83 4.61 3.15 0.63 9/16 0.87 1.57 FYTJ 30 KF HA 2306
23,813 30,5 13,5 38 76,2 148 117 80 16 14 22 40
1 1.20 0.53 1.50 3.00 5.83 4.61 3.15 0.63 9/16 0.87 1.57 FYTJ 30 KF HE 2306
25,4 30,5 13,5 38 76,2 148 117 80 16 14 22 40
1 3/16 1.34 0.63 1.69 3.50 6.34 5.12 3.78 0.63 9/16 0.96 1.70 FYTJ 35 KF HA 2307
30,163 34 16 43 88,9 161 130 96 16 14 24,3 43,3
1 1/ 4 1.42 0.63 1.81 3.50 6.89 5.67 3.94 0.63 9/16 1.06 1.89 FYTJ 40 KF HE 2308
31,75 36 16 46 88,9 175 144 100 16 14 27 48
1 7/16 1.50 0.71 1.97 3.87 7.40 5.83 4.25 0.75 5/8 1.12 1.99 FYTJ 45 KF HA 2309
36,513 38 18 50 98,4 188 148 108 19 16 28,5 50,5
1 1/ 2 1.50 0.71 1.97 3.87 7.40 5.83 4.25 0.75 5/8 1.12 1.99 FYTJ 45 KF HE 2309
38,1 38 18 50 98,4 188 148 108 19 16 28,5 50,5
1 5/ 8 1.57 0.71 2.17 4.00 7.68 6.18 4.53 0.75 5/8 1.20 2.07 FYTJ 50 KF HS 2310
41,275 40 18 55 101,6 195 157 115 19 16 30,5 52,5
1 11/16 1.57 0.71 2.17 4.00 7.68 6.18 4.53 0.75 5/8 1.20 2.07 FYTJ 50 KF HA 2310
42,863 40 18 55 101,6 195 157 115 19 16 30,5 52,5
1 3/ 4 1.57 0.71 2.17 4.00 7.68 6.18 4.53 0.75 5/8 1.20 2.07 FYTJ 50 KF HE 2310
44,45 40 18 55 101,6 195 157 115 19 16 30,5 52,5
216
without
adapter sleeve
C C0
limit
Pu
+ sleeve 4.8
FYTJ 25 KF FYTJ 505 YSA 205-2FK 3 150 1 760 80 7 000 1.60

14 7,8 0,335 0,72
19,5 11,2 0,475 0,83
19,5 11,2 0,475 0,83
25,5 15,3 0,655 1,30
30,7 19 0,8 1,65
33,2 21,6 0,915 2,20
33,2 21,6 0,915 2,20
35,1 23,2 0,98 2,55
35,1 23,2 0,98 2,55
35,1 23,2 0,98 2,55
217
Flanged Y-bearing units with a cast housing with a round flange and grub screws,
metric shafts
d 20 – 65 mm
T N
s1
d Da J L
B
A2
J1
A3
A1
Dimesions Basic load Fatigue Limiting Designation

d A1 A2 A3 B Da J J1 L N G s1 T C C0 Pu tolerance
h8 h6
mm kN kN r/min –
20 25,5 7 5 31 62 78 55,2 100 12 10 18,3 28,3 12,7 6,55 0,28 8 500 FYC 20 TF
25 27 7 6 34,1 70 90 63,6 115 12 10 19,8 29,8 14 7,8 0,335 7 000 FYC 25 TF
30 31 8 8 38,1 80 100 70,7 125 12 10 22,2 32,2 19,5 11,2 0,475 6 300 FYC 30 TF
35 34 9 8 42,9 90 110 77,8 135 14 12 25,4 36,4 25,5 15,3 0,655 5 300 FYC 35 TF
40 36 9 10 49,2 100 120 84,9 145 14 12 30,2 41,2 30,7 19 0,8 4 800 FYC 40 TF
45 38 14 12 49,2 105 132 93,3 160 16 14 30,2 40,2 33,2 21,6 0,915 4 300 FYC 45 TF
50 40 14 12 51,6 110 138 97,6 165 16 14 32,6 42,6 35,1 23,2 0,98 4 000 FYC 50 TF
55 43 15 12 55,6 125 150 106,1 185 19 16 33,4 46,4 43,6 29 1,25 3 600 FYC 55 TF
60 48 15 12 65,1 135 160 113,1 195 19 16 39,7 56,7 52,7 36 1,53 3 400 FYC 60 TF
65 50 15 14 68,3 145 170 120,2 205 19 16 42,9 58,9 55,9 40 1,7 3 000 FYC 65 TF
218
Designations Mass
Housing Bearing unit 4.9
– kg
FYC 20 TF FYC 504 YAR 204-2F 0,70
FYC 25 TF FYC 505 YAR 205-2F 0,93
FYC 30 TF FYC 506 YAR 206-2F 1,35
FYC 35 TF FYC 507 YAR 207-2F 1,55
FYC 40 TF FYC 508 YAR 208-2F 2,00
FYC 45 TF FYC 509 YAR 209-2F 2,65
FYC 50 TF FYC 510 YAR 210-2F 2,80
FYC 55 TF FYC 511 YAR 211-2F 4,30
FYC 60 TF FYC 512 YAR 212-2F 4,90
FYC 65 TF FYC 513 YAR 213-2F 5,70
219
Flanged Y-bearing units with a pressed steel housing and grub screws, metric shafts
d 12 – 25 mm
T
A2
d Da J H
B
A1
N
YAT YAR-2F YAR-2RF PF

d A 1 A2 B Da H H1/L J N G T C C0 Pu radial designation
mm kN kN kN –
12 2 7 27,4 49 81 – 63 7,1 6 17,9 9,56 4,75 0,2 2,5 PF 12 TF

2 7 27,4 49 81 29 63 7,1 6 17,9 9,56 4,75 0,2 2,5 PFD 12 TF
2 7 27,4 49 81 59 63 7,1 6 17,9 9,56 4,75 0,2 2,5 PFT 12 TF
15 2 7 27,4 49 81 – 63 7,1 6 17,9 9,56 4,75 0,2 2,5 PF 15 TF

2 7 27,4 49 81 29 63 7,1 6 17,9 9,56 4,75 0,2 2,5 PFD 15 TF
2 7 27,4 49 81 59 63 7,1 6 17,9 9,56 4,75 0,2 2,5 PFT 15 TF
17 2 7 22,1 49 81 – 63 7,1 6 17,9 9,56 4,75 0,2 2,5 PF 17 RM

2 7 27,4 49 81 – 63 7,1 6 17,9 9,56 4,75 0,2 2,5 PF 17 TF
2 7 22,1 49 81 29 63 7,1 6 17,9 9,56 4,75 0,2 2,5 PFD 17 RM
2 7 27,4 49 81 29 63 7,1 6 17,9 9,56 4,75 0,2 2,5 PFD 17 TF
2 7 22,1 49 81 59 63 7,1 6 17,9 9,56 4,75 0,2 2,5 PFT 17 RM
2 7 27,4 49 81 59 63 7,1 6 17,9 9,56 4,75 0,2 2,5 PFT 17 TF
20 2 8 25,5 55 91 – 71,5 8,7 8 20,3 12,7 6,55 0,28 3,3 PF 20 RM

2 8 31 55 91 – 71,5 8,7 8 20,3 12,7 6,55 0,28 3,3 PF 20 TF
2 8 31 55 91 – 71,5 8,7 8 20,3 12,7 6,55 0,28 3,3 PF 20 TR
2 8 25,5 55 91 32 71,5 8,7 8 20,3 12,7 6,55 0,28 3,3 PFD 20 RM
2 8 31 55 91 32 71,5 8,7 8 20,3 12,7 6,55 0,28 3,3 PFD 20 TF
2 8 31 55 91 32 71,5 8,7 8 20,3 12,7 6,55 0,28 3,3 PFD 20 TR
2 8 25,5 55 91 67 71,5 8,7 8 20,3 12,7 6,55 0,28 3,3 PFT 20 RM
2 8 31 55 91 67 71,5 8,7 8 20,3 12,7 6,55 0,28 3,3 PFT 20 TF
2 8 31 55 91 67 71,5 8,7 8 20,3 12,7 6,55 0,28 3,3 PFT 20 TR
25 2 9 27,2 60 95 – 76 8,7 8 21,5 14 7,8 0,335 3,6 PF 25 RM

2 9 34,1 60 95 – 76 8,7 8 21,8 14 7,8 0,335 3,6 PF 25 TF
2 9 34,1 60 95 – 76 8,7 8 21,8 14 7,8 0,335 3,6 PF 25 TR
2 9 27,2 60 95 34 76 8,7 8 21,5 14 7,8 0,335 3,6 PFD 25 RM
2 9 34,1 60 95 34 76 8,7 8 21,8 14 7,8 0,335 3,6 PFD 25 TF
2 9 34,1 60 95 34 76 8,7 8 21,8 14 7,8 0,335 3,6 PFD 25 TR
2 9 27,2 60 95 71 76 8,7 8 21,5 14 7,8 0,335 3,6 PFT 25 RM
2 9 34,1 60 95 71 76 8,7 8 21,8 14 7,8 0,335 3,6 PFT 25 TF
2 9 34,1 60 95 71 76 8,7 8 21,8 14 7,8 0,335 3,6 PFT 25 TR
220
N
H1
J H J H
N L
PFD PFT

Bearing unit Housing Bearing Bearing
No order
designation
unit 4.10
– – kg
PF 12 TF PF 40 YAR 203/12-2F 0,26

PFD 12 TF PFD 40 YAR 203/12-2F 0,19
PFT 12 TF PFT 40 YAR 203/12-2F 0,19
PF 15 TF PF 40 YAR 203/15-2F 0,25

PFD 15 TF PFD 40 YAR 203/15-2F 0,18
PFT 15 TF PFT 40 YAR 203/15-2F 0,18
PF 17 RM PF 40 YAT 203 0,22

PF 17 TF PF 40 YAR 203-2F 0,24
PFD 17 RM PFD 40 YAT 203 0,16
PFD 17 TF PFD 40 YAR 203-2F 0,17
PFT 17 RM PFT 40 YAT 203 0,16
PFT 17 TF PFT 40 YAR 203-2F 0,17
PF 20 RM PF 47 YAT 204 0,29

PF 20 TF PF 47 YAR 204-2F 0,32
PF 20 TR PF 47 YAR 204-2RF 0,32
PFD 20 RM PFD 47 YAT 204 0,23
PFD 20 TF PFD 47 YAR 204-2F 0,26
PFD 20 TR PFD 47 YAR 204-2RF 0,26
PFT 20 RM PFT 47 YAT 204 0,20
PFT 20 TF PFT 47 YAR 204-2F 0,23
PFT 20 TR PFT 47 YAR 204-2RF 0,23
PF 25 RM PF 52 YAT 205 0,33

PF 25 TF PF 52 YAR 205-2F 0,36
PF 25 TR PF 52 YAR 205-2RF 0,36
PFD 25 RM PFD 52 YAT 205 0,30
PFD 25 TF PFD 52 YAR 205-2F 0,33
PFD 25 TR PFD 52 YAR 205-2RF 0,33
PFT 25 RM PFT 52 YAT 205 0,25
PFT 25 TF PFT 52 YAR 205-2F 0,28
PFT 25 TR PFT 52 YAR 205-2RF 0,28
221
Flanged Y-bearing units with a pressed steel housing and grub screws, metric shafts
d 30 – 50 mm
T
A2
d Da J H
B
A1
N
YAT YAR-2F YAR-2RF PF1)

d A1 A2 B Da H H1/L J N G T C C0 Pu radial designation
mm kN kN kN –
30 2,5 9,5 30,2 71 112 – 90,5 10,5 10 23,5 19,5 11,2 0,475 5 PF 30 RM
2,5 9,5 38,1 71 112 – 90,5 10,5 10 24,7 19,5 11,2 0,475 5 PF 30 TF
2,5 9,5 38,1 71 112 – 90,5 10,5 10 24,7 19,5 11,2 0,475 5 PF 30 TR
2,5 9,5 30,2 71 112 38 90,5 10,5 10 23,5 19,5 11,2 0,475 5 PFD 30 RM
2,5 9,5 38,1 71 112 38 90,5 10,5 10 24,7 19,5 11,2 0,475 5 PFD 30 TF
2,5 9,5 38,1 71 112 38 90,5 10,5 10 24,7 19,5 11,2 0,475 5 PFD 30 TR
2,5 9,5 30,2 71 112 84 90,5 10,5 10 23,5 19,5 11,2 0,475 5 PFT 30 RM
2,5 9,5 38,1 71 112 84 90,5 10,5 10 24,7 19,5 11,2 0,475 5 PFT 30 TF
2,5 9,5 38,1 71 112 84 90,5 10,5 10 24,7 19,5 11,2 0,475 5 PFT 30 TR
35 2,5 10 33 81 122 – 100 11 10 25,8 25,5 15,3 0,655 6,5 PF 35 RM

2,5 10 42,9 81 122 – 100 11 10 27,9 25,5 15,3 0,655 6,5 PF 35 TF
2,5 10 42,9 81 122 – 100 11 10 27,9 25,5 15,3 0,655 6,5 PF 35 TR
2,5 10 33 81 122 45 100 11 10 25,8 25,5 15,3 0,655 6,5 PFD 35 RM
2,5 10 42,9 81 122 45 100 11 10 27,9 25,5 15,3 0,655 6,5 PFD 35 TF
2,5 10 42,9 81 122 45 100 11 10 27,9 25,5 15,3 0,655 6,5 PFD 35 TR
2,5 10 33 81 122 94 100 11 10 25,8 25,5 15,3 0,655 6,5 PFT 35 RM
2,5 10 42,9 81 122 94 100 11 10 27,9 25,5 15,3 0,655 6,5 PFT 35 TF
2,5 10 42,9 81 122 94 100 11 10 27,9 25,5 15,3 0,655 6,5 PFT 35 TR
40 3,5 10 36 91 148 – 119 13,5 12 28,8 30,7 19 0,8 7,5 PF 40 RM

3,5 10 49,2 91 148 – 119 13,5 12 33,7 30,7 19 0,8 7,5 PF 40 TF
3,5 10 49,2 91 148 – 119 13,5 12 33,7 30,7 19 0,8 7,5 PF 40 TR
3,5 10 36 91 148 53 119 13,5 12 28,8 30,7 19 0,8 7,5 PFD 40 RM
3,5 10 49,2 91 148 53 119 13,5 12 33,7 30,7 19 0,8 7,5 PFD 40 TF
3,5 10 49,2 91 148 53 119 13,5 12 33,7 30,7 19 0,8 7,5 PFD 40 TR
3,5 10 36 91 148 104 119 13,5 12 28,8 30,7 19 0,8 7,5 PFT 40 RM
3,5 10 49,2 91 148 104 119 13,5 12 33,7 30,7 19 0,8 7,5 PFT 40 TF
3,5 10 49,2 91 148 104 119 13,5 12 33,7 30,7 19 0,8 7,5 PFT 40 TR
45 3,5 10,5 37 97 149 – 120,6 13,5 12 29,3 33,2 21,6 0,915 8,3 PF 45 RM
3,5 10,5 49,2 97 149 – 120,6 13,5 12 33,7 33,2 21,6 0,915 8,3 PF 45 TF
3,5 10,5 49,2 97 149 – 120,6 13,5 12 33,7 33,2 21,6 0,915 8,3 PF 45 TR
50 4 11 38,9 102 155 – 127 13,5 12 31,6 35,1 23,2 0,98 9 PF 50 RM

4 11 51,6 102 155 – 127 13,5 12 36,6 35,1 23,2 0,98 9 PF 50 TF
4 11 51,6 102 155 – 127 13,5 12 36,6 35,1 23,2 0,98 9 PF 50 TR
1) Housings PF 80, PF 85 and PF 90 have four attachment bolt holes.
222
N
H1
J H J H
N L
PFD PFT

No order
designation
unit 4.10
– – kg
PF 30 RM PF 62 YAT 206 0,53

PF 30 TF PF 62 YAR 206-2F 0,58
PF 30 TR PF 62 YAR 206-2RF 0,58
PFD 30 RM PFD 62 YAT 206 0,42
PFD 30 TF PFD 62 YAR 206-2F 0,47
PFD 30 TR PFD 62 YAR 206-2RF 0,47
PFT 30 RM PFT 62 YAT 206 0,41
PFT 30 TF PFT 62 YAR 206-2F 0,46
PFT 30 TR PFT 62 YAR 206-2RF 0,46
PF 35 RM PF 72 YAT 207 0,67

PF 35 TF PF 72 YAR 207-2F 0,77
PF 35 TR PF 72 YAR 207-2RF 0,77
PFD 35 RM PFD 72 YAT 207 0,54
PFD 35 TF PFD 72 YAR 207-2F 0,64
PFD 35 TR PFD 72 YAR 207-2RF 0,64
PFT 35 RM PFT 72 YAT 207 0,55
PFT 35 TF PFT 72 YAR 207-2F 0,65
PFT 35 TR PFT 72 YAR 207-2RF 0,65
PF 40 RM PF 80 YAT 208 1,20

PF 40 TF PF 80 YAR 208-2F 1,30
PF 40 TR PF 80 YAR 208-2RF 1,30
PFD 40 RM PFD 80 YAT 208 0,90
PFD 40 TF PFD 80 YAR 208-2F 1,00
PFD 40 TR PFD 80 YAR 208-2RF 1,00
PFT 40 RM PFT 80 YAT 208 0,78
PFT 40 TF PFT 80 YAR 208-2F 0,90
PFT 40 TR PFT 80 YAR 208-2RF 0,90
PF 45 RM PF 85 YAT 209 1,25

PF 45 TF PF 85 YAR 209-2F 1,35
PF 45 TR PF 85 YAR 209-2RF 1,35
PF 50 RM PF 90 YAT 210 1,40

PF 50 TF PF 90 YAR 210-2F 1,55
PF 50 TR PF 90 YAR 210-2RF 1,55
223
Flanged Y-bearing units with a pressed steel housing and grub screws, inch shafts
d 5/8 – 1 1/4 in
T
A2
d Da J H
B
A1
N
YAR-2F YAR-2RF PF
Bearing unit
No order
d A1 A2 B Da H H1/L J N G T designation
in/mm –
5/8 0.08 0.28 1.08 1.93 3.19 – 2.48 0.28 1/4 0.70 PF 5/8 TF
15,875 2 7 27,4 49 81 – 63 7,1 6 17,9
3/4 0.08 0.32 1.22 2.17 3.58 – 2.82 0.34 5/16 0.80 PF 3/4 TF
19,05 2 8 31 55 91 – 71,5 8,7 8 20,3
0.08 0.32 1.22 2.17 3.58 – 2.82 0.34 5/16 0.80 PF 3/4 TR
2 8 31 55 91 – 71,5 8,7 8 20,3
0.08 0.32 1.22 2.17 3.58 1.26 2.82 0.34 5/16 0.80 PFD 3/4 TF
2 8 31 55 91 32 71,5 8,7 8 20,3
0.08 0.32 1.22 2.17 3.58 1.26 2.82 0.34 5/16 0.80 PFD 3/4 TR
2 8 31 55 91 32 71,5 8,7 8 20,3
0.08 0.32 1.22 2.17 3.58 2.64 2.82 0.34 5/16 0.80 PFT 3/4 TF
2 8 31 55 91 67 71,5 8,7 8 20,3
0.08 0.32 1.22 2.17 3.58 2.64 2.82 0.34 v 0.80 PFT 3/4 TR
2 8 31 55 91 67 71,5 8,7 8 20,3
1 0.08 0.35 1.34 2.36 3.74 – 2.99 0.34 5/16 0.86 PF 1. TF

25,4 2 9 34,1 60 95 – 76 8,7 8 21,8
0.08 0.35 1.34 2.36 3.74 – 2.99 0.34 5/16 0.86 PF 1. TR
2 9 34,1 60 95 – 76 8,7 8 21,8
0.08 0.35 1.34 2.36 3.74 1.34 2.99 0.34 5/16 0.86 PFD 1. TF
2 9 34,1 60 95 34 76 8,7 8 21,8
0.08 0.35 1.34 2.36 3.74 1.34 2.99 0.34 5/16 0.86 PFD 1. TR
2 9 34,1 60 95 34 76 8,7 8 21,8
0.08 0.35 1.34 2.36 3.74 2.80 2.99 0.34 5/16 0.86 PFT 1. TF
2 9 34,1 60 95 71 76 8,7 8 21,8
0.08 0.35 1.34 2.36 3.74 2.80 2.99 0.34 5/16 0.86 PFT 1. TR
2 9 34,1 60 95 71 76 8,7 8 21,8
1 1/4 0.10 0.39 1.69 3.19 4.80 – 3.94 0.43 3/8 1.10 PF 1.1/4 TF
31,75 2,5 10 42,9 81 122 – 100 11 10 27,9
0.10 0.39 1.69 3.19 4.80 – 3.94 0.43 3/8 1.10 PF 1.1/4 TR
2,5 10 42,9 81 122 – 100 11 10 27,9
0.10 0.39 1.69 3.19 4.80 1.77 3.94 0.43 3/8 1.10 PFD 1.1/4 TF
2,5 10 42,9 81 122 45 100 11 10 27,9
0.10 0.39 1.69 3.19 4.80 1.77 3.94 0.43 3/8 1.10 PFD 1.1/4 TR
2,5 10 42,9 81 122 45 100 11 10 27,9
0.10 0.39 1.69 3.19 4.80 3.7 3.94 0.43 3/8 1.10 PFT 1.1/4 TF
2,5 10 42,9 81 122 94 100 11 10 27,9
0.10 0.39 1.69 3.19 4.80 3.7 3.94 0.43 3/8 1.10 PFT 1.1/4 TR
2,5 10 42,9 81 122 94 100 11 10 27,9
224
N
H1
J H J H
N L
PFD PFT

Bearing unit Housing Bearing ratings load housing Bearing
No order
designation
dynamic static
C C0
limit
Pu
load
radial
unit 4.10
– lbf/kN lbf/kN lbf/kN lb/kg
PF 5/8 TF PF 40 YAR 203-010-2F 2 150 1 070 50 560 0.49

9,56 4,75 0,2 2,5 0,22
PF 3/4 TF PF 47 YAR 204-012-2F 2 860 1 470 60 740 0.66

12,7 6,55 0,28 3,3 0,30
PF 3/4 TR PF 47 YAR 204-012-2RF 2 860 1 470 60 740 0.66
12,7 6,55 0,28 3,3 0,30
PFD 3/4 TF PFD 47 YAR 204-012-2F 2 860 1 470 60 740 0.53
12,7 6,55 0,28 3,3 0,24
PFD 3/4 TR PFD 47 YAR 204-012-2RF 2 860 1 470 60 740 0.53
12,7 6,55 0,28 3,3 0,24
PFT 3/4 TF PFT 47 YAR 204-012-2F 2 860 1 470 60 740 0.53
12,7 6,55 0,28 3,3 0,24
PFT 3/4 TR PFT 47 YAR 204-012-2RF 2 860 1 470 60 740 0.53
12,7 6,55 0,28 3,3 0,24
PF 1. TF PF 52 YAR 205-100-2F 3 150 1 760 80 810 0.77

14 7,8 0,335 3,6 0,35
PF 1. TR PF 52 YAR 205-100-2RF 3 150 1 760 80 810 0.77
14 7,8 0,335 3,6 0,35
PFD 1. TF PFD 52 YAR 205-100-2F 3 150 1 760 80 810 0.64
14 7,8 0,335 3,6 0,29
PFD 1. TR PFD 52 YAR 205-100-2RF 3 150 1 760 80 810 0.64
14 7,8 0,335 3,6 0,29
PFT 1. TF PFT 52 YAR 205-100-2F 3 150 1 760 80 810 0.62
14 7,8 0,335 3,6 0,28
PFT 1. TR PFT 52 YAR 205-100-2RF 3 150 1 760 80 810 0.62
14 7,8 0,335 3,6 0,28
PF 1.1/4 TF PF 72 YAR 207-104-2F 5 740 3 440 150 1 460 1.85

25,5 15,3 0,655 6,5 0,83
PF 1.1/4 TR PF 72 YAR 207-104-2RF 5 740 3 440 150 1 460 1.85
25,5 15,3 0,655 6,5 0,83
PFD 1.1/4 TF PFD 72 YAR 207-104-2F 5 740 3 440 150 1 460 1.50
25,5 15,3 0,655 6,5 0,69
PFD 1.1/4 TR PFD 72 YAR 207-104-2RF 5 740 3 440 150 1 460 1.50
25,5 15,3 0,655 6,5 0,69
PFT 1.1/4 TF PFT 72 YAR 207-104-2F 5 740 3 440 150 1 460 1.50
25,5 15,3 0,655 6,5 0,69
PFT 1.1/4 TR PFT 72 YAR 207-104-2RF 5 740 3 440 150 1 460 1.50
25,5 15,3 0,655 6,5 0,69
225
Flanged Y-bearing units with a pressed steel housing and grub screws, inch shafts
d 1 1/2 – 1 3/4 in
T
A2
d Da J H
B
A1
N
YAR-2F YAR-2RF PF
Bearing unit
No order
d A1 A2 B Da H H1/L J N G T designation
in/mm –
1 1/ 2 0.14 0.39 1.94 3.58 5.83 – 4.69 0.53 1/2 1.33 PF 1.1/2 TF
38,1 3,5 10 49,2 91 148 – 119 13,5 12 33,7
0.14 0.39 1.94 3.58 5.83 – 4.69 0.53 1/2 1.33 PF 1.1/2 TR
3,5 10 49,2 91 148 – 119 13,5 12 33,7
0.14 0.39 1.94 3.58 5.83 2.09 4.69 0.53 1/2 1.33 PFD 1.1/2 TF
3,5 10 49,2 91 148 53 119 13,5 12 33,7
0.14 0.39 1.94 3.58 5.83 2.09 4.69 0.53 1/2 1.33 PFD 1.1/2 TR
3,5 10 49,2 91 148 53 119 13,5 12 33,7
0.14 0.39 1.94 3.58 5.83 4.09 4.69 0.53 1/2 1.33 PFT 1.1/2 TF
3,5 10 49,2 91 148 104 119 13,5 12 33,7
0.14 0.39 1.94 3.58 5.83 4.09 4.69 0.53 1/2 1.33 PFT 1.1/2 TR
3,5 10 49,2 91 148 104 119 13,5 12 33,7
1 3/ 4 0.14 0.41 1.94 3.82 5.87 – 4.75 0.53 1/2 1.33 PF 1.3/4 TF
44,45 3,5 10,5 49,2 97 149 – 120,6 13,5 12 33,7
0.14 0.41 1.94 3.82 5.87 – 4.75 0.53 1/2 1.33 PF 1.3/4 TR
3,5 10,5 49,2 97 149 – 120,6 13,5 12 33,7
226
N
H1
J H J H
N L
PFD PFT

No order
designation
dynamic static
C C0
limit
Pu
load
radial
unit 4.10
.9
– lbf/kN lbf/kN lbf/kN lb/kg
PF 1.1/2 TF PF 80 YAR 208-108-2F 6 910 4 280 180 1 690 1.80

30,7 19 0,8 7,5 0,81
PF 1.1/2 TR PF 80 YAR 208-108-2RF 6 910 4 280 180 1 690 1.80
30,7 19 0,8 7,5 0,81
PFD 1.1/2 TF PFD 80 YAR 208-108-2F 6 910 4 280 180 1 690 2.35
30,7 19 0,8 7,5 1,05
PFD 1.1/2 TR PFD 80 YAR 208-108-2RF 6 910 4 280 180 1 690 2.35
30,7 19 0,8 7,5 1.05
PFT 1.1/2 TF PFT 80 YAR 208-108-2F 6 910 4 280 180 1 690 2.10
30,7 19 0,8 7,5 0,95
PFT 1.1/2 TR PFT 80 YAR 208-108-2RF 6 910 4 280 180 1 690 2.10
30,7 19 0,8 7,5 0,95
PF 1.3/4 TF PF 85 YAR 209-112-2F 7 470 4 860 210 1 870 2.75

33,2 21,6 0,915 8,3 1,25
PF 1.3/4 TR PF 85 YAR 209-112-2RF 7 470 4 860 210 1 870 2.75
33,2 21,6 0,915 8,3 1,25
227
Flanged Y-bearing units with a pressed steel housing and an eccentric locking collar,
metric shafts
d 15 – 35 mm
T
A2
d Da J H
B1
A1
N
YET YEL .. -2F PF

d A1 A2 B1 Da H H1/L J N G T C C0 Pu radial designation
mm kN kN kN –
15 2 7 28,6 49 81 – 63 7,1 6 24,1 9,56 4,75 0,2 2,5 PF 15 FM

2 7 28,6 49 81 29 63 7,1 6 24,1 9,56 4,75 0,2 2,5 PFD 15 FM
2 7 28,6 49 81 59 63 7,1 6 24,1 9,56 4,75 0,2 2,5 PFT 15 FM
17 2 7 28,6 49 81 – 63 7,1 6 24,1 9,56 4,75 0,2 2,5 PF 17 FM

2 7 28,6 49 81 29 63 7,1 6 24,1 9,56 4,75 0,2 2,5 PFD 17 FM
2 7 28,6 49 81 59 63 7,1 6 24,1 9,56 4,75 0,2 2,5 PFT 17 FM
20 2 8 31 55 91 – 71,5 8,7 8 25,5 12,7 6,55 0,28 3,3 PF 20 FM

2 8 43,7 55 91 – 71,5 8,7 8 28,6 12,7 6,55 0,28 3,3 PF 20 WF
2 8 31 55 91 32 71,5 8,7 8 25,5 12,7 6,55 0,28 3,3 PFD 20 FM
2 8 43,7 55 91 32 71,5 8,7 8 28,6 12,7 6,55 0,28 3,3 PFD 20 WF
2 8 31 55 91 67 71,5 8,7 8 25,5 12,7 6,55 0,28 3,3 PFT 20 FM
2 8 43,4 55 91 67 71,5 8,7 8 28,6 12,7 6,55 0,28 3,3 PFT 20 WF
25 2 9 31 60 95 – 76 8,7 8 25,5 14 7,8 0,335 3,6 PF 25 FM

2 9 44,4 60 95 – 76 8,7 8 28,9 14 7,8 0,335 3,6 PF 25 WF
2 9 31 60 95 34 76 8,7 8 25,5 14 7,8 0,335 3,6 PFD 25 FM
2 9 44,4 60 95 34 76 8,7 8 28,9 14 7,8 0,335 3,6 PFD 25 WF
2 9 31 60 95 71 76 8,7 8 25,5 14 7,8 0,335 3,6 PFT 25 FM
2 9 44,4 60 95 71 76 8,7 8 28,9 14 7,8 0,335 3,6 PFT 25 WF
30 2,5 9,5 35,7 71 112 – 90,5 10,5 10 29,2 19,5 11,2 0,475 5 PF 30 FM
2,5 9,5 48,4 71 112 – 90,5 10,5 10 32,6 19,5 11,2 0,475 5 PF 30 WF
2,5 9,5 35,7 71 112 38 90,5 10,5 10 29,2 19,5 11,2 0,475 5 PFD 30 FM
2,5 9,5 48,4 71 112 38 90,5 10,5 10 32,6 19,5 11,2 0,475 5 PFD 30 WF
2,5 9,5 35,7 71 112 84 90,5 10,5 10 29,2 19,5 11,2 0,475 5 PFT 30 FM
2,5 9,5 48,4 71 112 84 90,5 10,5 10 32,6 19,5 11,2 0,475 5 PFT 30 WF
35 2,5 10 38,9 81 122 – 100 11 10 31,9 25,5 15,3 0,655 6,5 PF 35 FM

2,5 10 51,1 81 122 – 100 11 10 34,8 25,5 15,3 0,655 6,5 PF 35 WF
2,5 10 38,9 81 122 45 100 11 10 31,9 25,5 15,3 0,655 6,5 PFD 35 FM
2,5 10 51,1 81 122 45 100 11 10 34,8 25,5 15,3 0,655 6,5 PFD 35 WF
2,5 10 38,9 81 122 94 100 11 10 31,9 25,5 15,3 0,655 6,5 PFT 35 FM
2,5 10 51,1 81 122 94 100 11 10 34,8 25,5 15,3 0,655 6,5 PFT 35 WF
228
N
H1
J H J H
N L
PFD PFT

No order
designation
unit 4.11
– – kg
PF 15 FM PF 40 YET 203/15 0,24

PFD 15 FM PFD 40 YET 203/15 0,21
PFT 15 FM PFT 40 YET 203/15 0,21
PF 17 FM PF 40 YET 203 0,22

PFD 17 FM PFD 40 YET 203 0,20
PFT 17 FM PFT 40 YET 203 0,19
PF 20 FM PF 47 YET 204 0,30

PF 20 WF PF 47 YEL 204-2F 0,33
PFD 20 FM PFD 47 YET 204 0,26
PFD 20 WF PFD 47 YEL 204-2F 0,29
PFT 20 FM PFT 47 YET 204 0,25
PFT 20 WF PFT 47 YEL 204-2F 0,28
PF 25 FM PF 52 YET 205 0,35

PF 25 WF PF 52 YEL 205-2F 0,40
PFD 25 FM PFD 52 YET 205 0,30
PFD 25 WF PFD 52 YEL 205-2F 0,35
PFT 25 FM PFT 52 YET 205 0,29
PFT 25 WF PFT 52 YEL 205-2F 0,34
PF 30 FM PF 62 YET 206 0,56

PF 30 WF PF 62 YEL 206-2F 0,62
PFD 30 FM PFD 62 YET 206 0,48
PFD 30 WF PFD 62 YEL 206-2F 0,54
PFT 30 FM PFT 62 YET 206 0,46
PFT 30 WF PFT 62 YEL 206-2F 0,52
PF 35 FM PF 72 YET 207 0,70

PF 35 WF PF 72 YEL 207-2F 0,78
PFD 35 FM PFD 72 YET 207 0,66
PFD 35 WF PFD 72 YEL 207-2F 0,74
PFT 35 FM PFT 72 YET 207 0,72
PFT 35 WF PFT 72 YEL 207-2F 0,80
229
metric shafts
d 40 – 50 mm
T
A2
d Da J H
B1
A1
N
YET YEL .. -2F PF

d A1 A2 B1 Da H H1/L J N G T C C0 Pu radial designation
mm kN kN kN –
40 3,5 10 43,7 91 148 – 119 13,5 12 36,2 30,7 19 0,8 7,5 PF 40 FM

3,5 10 56,3 91 148 – 119 13,5 12 38,4 30,7 19 0,8 7,5 PF 40 WF
3,5 10 43,7 91 148 53 119 13,5 12 36,2 30,7 19 0,8 7,5 PFD 40 FM
3,5 10 56,3 91 148 53 119 13,5 12 38,4 30,7 19 0,8 7,5 PFD 40 WF
3,5 10 43,7 91 148 104 119 13,5 12 36,2 30,7 19 0,8 7,5 PFT 40 FM
3,5 10 56,3 91 148 104 119 13,5 12 38,4 30,7 19 0,8 7,5 PFT 40 WF
45 3,5 10,5 43,7 97 149 – 120,6 13,5 12 36,2 33,2 21,6 0,915 8,3 PF 45 FM
3,5 10,5 56,3 97 149 – 120,6 13,5 12 38,4 33,2 21,6 0,915 8,3 PF 45 WF
50 4 11 43,7 102 155 – 127 13,5 12 36,7 35,1 23,2 0,98 9 PF 50 FM

4 11 62,7 102 155 – 127 13,5 12 42,1 35,1 23,2 0,98 9 PF 50 WF
230
N
H1
J H J H
N L
PFD PFT

No order
designation
unit 4.11
– – kg
PF 40 FM PF 80 YET 208 1,20

PF 40 WF PF 80 YEL 208-2F 1,30
PFD 40 FM PFD 80 YET 208 1,05
PFD 40 WF PFD 80 YEL 208-2F 1,15
PFT 40 FM PFT 80 YET 208 0,94
PFT 40 WF PFT 80 YEL 208-2F 1,00
PF 45 FM PF 85 YET 209 1,30

PF 45 WF PF 85 YEL 209-2F 1,40
PF 50 FM PF 90 YET 210 1,50

PF 50 WF PF 90 YEL 210-2F 1,65
231
inch shafts
d 3/4 – 1 1/2 in
T
A2
d Da J H
B1
A1
N
PF1)
Bearing unit
No order
d A1 A2 B1 Da H H1/L J N G T designation
in/mm –
3/4 0.08 0.31 1.22 2.17 3.58 – 2.81 0.34 5/16 1.00 PF 3/4 FM
19,05 2 8 31 55 91 – 71,5 8,7 8 25,5
0.08 0.31 1.22 2.17 3.58 1.26 2.81 0.34 5/16 1.00 PFD 3/4 FM
2 8 31 55 91 32 71,5 8,7 8 25,5
0.08 0.31 1.22 2.17 3.58 2.64 2.81 0.34 5/16 1.00 PFT 3/4 FM
2 8 31 55 91 67 71,5 8,7 8 25,5
1 0.08 0.35 1.22 2.36 3.74 – 2.99 0.34 5/16 1.00 PF 1. FM

25,4 2 9 31 60 95 – 76 8,7 8 25,5
0.08 0.35 1.22 2.36 3.74 1.34 2.99 0.34 5/16 1.00 PFD 1. FM
2 9 31 60 95 34 76 8,7 8 25,5
0.08 0.35 1.22 2.36 3.74 2.8 2.99 0.34 5/16 1.00 PFT 1. FM
2 9 31 60 95 71 76 8,7 8 25,5
1 1/ 2 0.14 0.39 1.72 3.58 5.83 – 4.69 0.53 1/2 1.43 PF 1.1/2 FM
38,1 3,5 10 43,7 91 148 – 119 13,5 12 36,2
0.14 0.39 1.72 3.58 5.83 2.09 4.69 0.53 1/2 1.43 PFD 1.1/2 FM
3,5 10 43,7 91 148 53 119 13,5 12 36,2
0.14 0.39 1.72 3.58 5.83 4.09 4.69 0.53 1/2 1.43 PFT 1.1/2 FM
3,5 10 43,7 91 148 104 119 13,5 12 36,2
1) Housing PF 80 has four attachment bolt holes.
232
N
H1
J H J H
N L
PFD PFT

No order
designation
dynamic static
C C0
limit
Pu
load
radial
unit 4.11
PF 3/4 FM PF 47 YET 204-012 2 860 1 470 60 740 0.70

12,7 6,55 0,28 3,3 0,31
PFD 3/4 FM PFD 47 YET 204-012 2 860 1 470 60 740 0.60
12,7 6,55 0,28 3,3 0,27
PFT 3/4 FM PFT 47 YET 204-012 2 860 1 470 60 740 0.60
12,7 6,55 0,28 3,3 0,26
PF 1. FM PF 52 YET 205-100 3 150 1 760 80 810 0.80

14 7,8 0,335 3,6 0,35
PFD 1. FM PFD 52 YET 205-100 3 150 1 760 80 810 0.80
14 7,8 0,335 3,6 0,35
PFT 1. FM PFT 52 YET 205-100 3 150 1 760 80 810 0.60
14 7,8 0,335 3,6 0,29
PF 1.1/2 FM PF 80 YET 208-108 6 910 4 280 180 1 690 2.70

30,7 19 0,8 7,5 1,25
PFD 1.1/2 FM PFD 80 YET 208-108 6 910 4 280 180 1 690 2.30
30,7 19 0,8 7,5 1,05
PFT 1.1/2 FM PFT 80 YET 208-108 6 910 4 280 180 1 690 2.20
30,7 19 0,8 7,5 0,98
233
Y-bearing take-up units
Designs ................................................................................................................. 236
Data – general ....................................................................................................... 236

Dimensions .................................................................................................................................... 236
Tolerances ...................................................................................................................................... 236
Materials ........................................................................................................................................ 237
End covers ..................................................................................................................................... 237
Grease fills ..................................................................................................................................... 237
Mounting ....................................................................................................................................... 237
Product tables ....................................................................................................... 238

5.1 Y-bearing take-up units with a cast housing and grub screws,
metric shafts ......................................................................................................................... 238 5
inch shafts ............................................................................................................................. 240
5.2 Y-bearing take-up units with a cast housing and an eccentric locking collar,
metric shafts ......................................................................................................................... 244
235
Y-bearing take-up units
Designs Fig. 1
Y-bearing take-up units consist of a cast housing

and an insert bearing († fig. 1). These units
are typically mounted in take-up frames and
connected by an adjustment screw. A grease fitting
is provided in the housing for relubrication.
Standard Y-bearing take-up units can be located
on the shaft via the inner ring of the insert
bearing with either:

The Y-bearing is sealed with either:

• the standard integral seal and an additional
flinger Fig. 2
For additional information about Y-bearings,

refer to the section Y-bearings, starting on
page 79.
Data – general H1
Dimensions
The boundary dimensions of SKF Y-bearing
take-up housings in the:
• TU series are in accordance with

ISO 3228:1993 A1
• TUJ series are in accordance with
JIS B 1559-1995
Tolerances
The tolerances († fig. 2), which are in accordance
with ISO 3228:1993, are:
• ± 0,25 mm for the distance between the

guide surfaces H1
• within the tolerance range H13 for the width
of the guide surfaces A1
Information about the tolerances of the inner

ring bore diameter can be found in the section
Y-bearings on page 89.
236
Radial internal clearance Fig. 3
The Y-bearing used in a Y-bearing take-up unit

has the same radial internal clearance as a simi-
larly sized individual Y-bearing. The values for
radial internal clearance can be found in the
section Y-bearings on page 90.
Materials
The housings for Y-bearing take-up units are
manufactured from grey cast iron EN-GJL
HB195 in accordance with EN 1561:1997.
Load carrying ability of the housings

Cast housings can withstand the same dynamic
and static loads as their insert bearings. There-
fore, Y-bearing take-up units may also be used
where shock loads or variable axial loads occur, Mounting
provided the adjustment screw and the way it is The mounting procedures for a Y-bearing take-
secured to the Y-bearing take-up unit is suffi- up unit depend on the method used to attach
ciently strong. the unit to the shaft. The procedures are briefly
If SKF Y-bearing units are to be used in an described in the section Mounting instructions,
application where health, safety, or the environ- starting on page 52.
ment is at risk, contact the SKF application
engineering service during the design phase.
5
End covers
To protect the shaft ends and avoid any accidents,
end covers are available for Y-bearing take-up
units in the TU series († fig. 3).
bearing unit. The designation of the end cover is
listed, together with the distance that the end
refer to the section Design of Y-bearing arrange-
ments on page 47.
Grease fills
All standard SKF Y-bearing take-up units are
filled with a high-quality, long-lasting grease
containing a lithium-calcium thickener that has
a consistency of 2 on the NLGI scale.
For additional information about lubricants
and maintenance‚ starting on page 48.
237
Y-bearing take-up units with a cast housing and grub screws, metric shafts
d 20 – 60 mm
s1
A2 L3
N1
L2
B
d H H1 D1 N H2
A1 L1
A L
Bearing unit
d A A1 A2 B D1 H H1 H2 L L1 L2 L3 N N1 s1
mm –
20 34 13,5 25 31 19 92 76 54 97 62 10 54 32 16 18,3 TU 20 TF
34 12 25 31 19 92 76 54 97 62 10 54 32 16 18,3 TUJ 20 TF
25 34 13,5 25 34,1 19 91 76 53 100 64 10 52 33 16 19,8 TU 25 TF

34 12 25 34,1 19 91 76 53 100 64 10 52 33 16 19,8 TUJ 25 TF
30 37 13,5 28 38,1 22 104 89 56 114 70 10 57 37 16 22,2 TU 30 TF

37 12 28 38,1 22 104 89 56 114 70 10 57 37 16 22,2 TUJ 30 TF
35 37 13,5 30 42,9 22 103 89 64 129 78 12 64 38 17 25,4 TU 35 TF

37 12 30 42,9 22 103 89 64 129 78 12 64 38 17 25,4 TUJ 35 TF
40 49 17,5 33 49,2 29 115 101 83 145 88 15 83 50 19 30,2 TU 40 TF

49 16 33 49,2 29 115 102 83 145 88 15 83 50 19 30,2 TUJ 40 TF
45 49 17,5 35 49,2 29 117 101 83 144 87 15 83 49 19 30,2 TU 45 TF

49 16 35 49,2 29 117 102 83 144 87 15 83 49 19 30,2 TUJ 45 TF
50 49 17,5 36 51,6 29 117 101 83 149 90 16 86 49 19 32,6 TU 50 TF

49 16 36 51,6 29 117 102 83 149 90 16 86 49 19 32,6 TUJ 50 TF
55 64 27 41 55,6 35 146 130 102 171 106 19 95 64 25 33,4 TU 55 TF

64 22 41 55,6 35 146 130 102 171 106 19 95 64 25 33,4 TUJ 55 TF
60 60 22 44 65,1 35 146 130 102 186 118 19 100 63,5 32 39,7 TUJ 60 TF
238
A5
Designations Basic load Fatigue Limiting Mass Appropriate end cover

Bearing unit Separate components ratings load speed Bearing Designation Dimension
C C0 Pu tolerance A5
h6
– kN kN r/min kg – mm
TU 20 TF TU 504 M YAR 204-2F 12,7 6,55 0,28 8 500 0,73 ECY 204 18,5
TUJ 20 TF TUJ 504 YAR 204-2F 12,7 6,55 0,28 8 500 0,76 – –
TU 25 TF TU 505 M YAR 205-2F 14 7,8 0,335 7 000 0,77 ECY 205 18

5.1
TUJ 25 TF TUJ 505 YAR 205-2F 14 7,8 0,335 7 000 0,82 – –
TU 30 TF TU 506 M YAR 206-2F 19,5 11,2 0,475 6 300 1,25 ECY 206 20
TUJ 30 TF TUJ 506 YAR 206-2F 19,5 11,2 0,475 6 300 1,28 – –
TU 35 TF TU 507 M YAR 207-2F 25,5 15,3 0,655 5 300 1,45 ECY 207 22
TUJ 35 TF TUJ 507 YAR 207-2F 25,5 15,3 0,655 5 300 1,50 – –
TU 40 TF TU 508 M YAR 208-2F 30,7 19 0,8 4 800 2,30 ECY 208 23,5
TUJ 40 TF TUJ 508 YAR 208-2F 30,7 19 0,8 4 800 2,35 – –
TU 45 TF TU 509 M YAR 209-2F 33,2 21,6 0,915 4 300 2,30 ECY 209 23
TUJ 45 TF TUJ 509 YAR 209-2F 33,2 21,6 0,915 4 300 2,35 – –
TU 50 TF TU 510 M YAR 210-2F 35,1 23,2 0,98 4 000 2,40 ECY 210 29,5
TUJ 50 TF TUJ 510 YAR 210-2F 35,1 23,2 0,98 4 000 2,50 – –
TU 55 TF TU 511 M YAR 211-2F 43,6 29 1,25 3 600 3,85 ECY 211 34

TUJ 55 TF TUJ 511 YAR 211-2F 43,6 29 1,25 3 600 4,00 – –
TUJ 60 TF TUJ 512 YAR 212-2F 52,7 36 1,53 3 400 5,00 – –
239
Y-bearing take-up units with a cast housing and grub screws, inch shafts
d 3/4 – 1 7/16 in
s1
A2 L3
N1
L2
B
d H H1 D1 N H2
A1 L1
A L
Bearing unit
in/mm –
3/4 1.34 0.53 0.98 1.22 0.75 3.62 2.99 2.13 3.82 2.44 0.39 2.13 1.26 0.63 0.72 TU 3/4 TF
19,05 34 13,5 25 31 19 92 76 54 97 62 10 54 32 16 18,3
13/16 1.34 0.53 0.98 1.34 0.75 3.58 2.99 2.09 3.94 2.52 0.39 2.05 1.3 0.63 0.78 TU 13/16 TF
20,638 34 13,5 25 34,1 19 91 76 53 100 64 10 52 33 16 19,8
7/8 1.34 0.53 0.98 1.34 0.75 3.58 2.99 2.09 3.94 2.52 0.39 2.05 1.3 0.63 0.78 TU 7/8 TF
22,225 34 13,5 25 34,1 19 91 76 53 100 64 10 52 33 16 19,8
15/16 1.34 0.53 0.98 1.34 0.75 3.58 2.99 2.09 3.94 2.52 0.39 2.05 1.3 0.63 0.78 TU 15/16 TF
23,813 34 13,5 25 34,1 19 91 76 53 100 64 10 52 33 16 19,8
1 1.34 0.53 0.98 1.34 0.75 3.58 2.99 2.09 3.94 2.52 0.39 2.05 1.3 0.63 0.78 TU 1. TF
25,4 34 13,5 25 34,1 19 91 76 53 100 64 10 52 33 16 19,8
1 1/16 1.46 0.53 1.1 1.5 0.87 4.09 3.5 2.2 4.49 2.76 0.39 2.24 1.46 0.63 0.87 TU 1.1/16 TF
26,988 37 13,5 28 38,1 22 104 89 56 114 70 10 57 37 16 22,2
1 1/ 8 1.46 0.53 1.1 1.5 0.87 4.09 3.5 2.2 4.49 2.76 0.39 2.24 1.46 0.63 0.87 TU 1.1/8 TF
28,575 37 13,5 28 38,1 22 104 89 56 114 70 10 57 37 16 22,2
1 3/16 1.46 0.53 1.1 1.5 0.87 4.09 3.5 2.2 4.49 2.76 0.39 2.24 1.46 0.63 0.87 TU 1.3/16 TF
30,163 37 13,5 28 38,1 22 104 89 56 114 70 10 57 37 16 22,2
1 1/ 4 1.46 0.53 1.18 1.69 0.87 4.06 3.5 2.52 5.08 3.07 0.47 2.52 1.5 0.67 1 TU 1.1/4 TF
31,75 37 13,5 30 42,9 22 103 89 64 129 78 12 64 38 17 25,4
1 5/16 1.46 0.53 1.18 1.69 0.87 4.06 3.5 2.52 5.08 3.07 0.47 2.52 1.5 0.67 1 TU 1.5/16 TF
33,338 37 13,5 30 42,9 22 103 89 64 129 78 12 64 38 17 25,4
1 3/ 8 1.46 0.53 1.18 1.69 0.87 4.06 3.5 2.52 5.08 3.07 0.47 2.52 1.5 0.67 1 TU 1.3/8 TF
34,925 37 13,5 30 42,9 22 103 89 64 129 78 12 64 38 17 25,4
1 7/16 1.46 0.53 1.18 1.69 0.87 4.06 3.5 2.52 5.08 3.07 0.47 2.52 1.5 0.67 1 TU 1.7/16 TF
36,513 37 13,5 30 42,9 22 103 89 64 129 78 12 64 38 17 25,4
240
C C0 Pu tolerance
h6
TU 3/4 TF TU 504 U YAR 204-012-2F 2 860 1 470 60 8 500 1.61

12,7 6,55 0,28 0,73
TU 13/16 TF TU 505 U YAR 205-013-2F 3 150 1 760 80 7 000 1.79

5.1
14 7,8 0,335 0,81
TU 7/8 TF TU 505 U YAR 205-014-2F 3 150 1 760 80 7 000 1.76

14 7,8 0,335 0,80
TU 15/16 TF TU 505 U YAR 205-015-2F 3 150 1 760 80 7 000 1.72

14 7,8 0,335 0,78
TU 1. TF TU 505 M YAR 205-100-2F 3 150 1 760 80 7 000 1.68

14 7,8 0,335 0,76
TU 1.1/16 TF TU 506 U YAR 206-101-2F 4 390 2 520 110 6 300 2.85

19,5 11,2 0,475 1,30
TU 1.1/8 TF TU 506 U YAR 206-102-2F 4 390 2 520 110 6 300 2.80

19,5 11,2 0,475 1,25
TU 1.3/16 TF TU 506 U YAR 206-103-2F 4 390 2 520 110 6 300 2.75

19,5 11,2 0,475 1,25
TU 1.1/4 TF TU 507 M YAR 207-104-2F 5 740 3 440 150 5 300 3.30

25,5 15,3 0,655 1,50
TU 1.5/16 TF TU 507 U YAR 207-105-2F 5 740 3 440 150 5 300 3.30

25,5 15,3 0,655 1,50
TU 1.3/8 TF TU 507 U YAR 207-106-2F 5 740 3 440 150 5 300 3.20

25,5 15,3 0,655 1,45
TU 1.7/16 TF TU 507 U YAR 207-107-2F 5 740 3 440 150 5 300 3.15

25,5 15,3 0,655 1,45
241
Y-bearing take-up units with a cast housing and grub screws, inch shafts
d 1 1/2 – 2 3/16 in
s1
A2 L3
N1
L2
B
d H H1 D1 N H2
A1 L1
A L
Bearing unit
in/mm –
1 1/ 2 1.93 0.69 1.3 1.94 1.14 4.53 3.98 3.27 5.71 3.46 0.59 3.27 1.97 0.75 1.19 TU 1.1/2 TF
38,1 49 17,5 33 49,2 29 115 101 83 145 88 15 83 50 19 30,2
1 11/16 1.93 0.69 1.38 1.94 1.14 4.61 3.98 3.27 5.67 3.43 0.59 3.27 1.93 0.75 1.19 TU 1.11/16 TF
42,863 49 17,5 35 49,2 29 117 101 83 144 87 15 83 49 19 30,2
1 3/ 4 1.93 0.69 1.38 1.94 1.14 4.61 3.98 3.27 5.67 3.43 0.59 3.27 1.93 0.75 1.19 TU 1.3/4 TF
44,45 49 17,5 35 49,2 29 117 101 83 144 87 15 83 49 19 30,2
1 15/16 1.93 0.69 1.42 2.03 1.14 4.61 3.98 3.27 5.87 3.54 0.63 3.39 1.93 0.75 1.28 TU 1.15/16 TF
49,213 49 17,5 36 51,6 29 117 101 83 149 90 16 86 49 19 32,6
2 2.52 1.06 1.61 2.19 1.38 5.75 5.12 4.02 6.73 4.17 0.75 3.74 2.52 0.98 1.31 TU 2. TF
50,8 64 27 41 55,6 35 146 130 102 171 106 19 95 64 25 33,4
2 3/16 2.52 1.06 1.61 2.19 1.38 5.75 5.12 4.02 6.73 4.17 0.75 3.74 2.52 0.98 1.31 TU 2.3/16 TF
55,563 64 27 41 55,6 35 146 130 102 171 106 19 95 64 25 33,4
242
C C0 Pu tolerance
h6
TU 1.1/2 TF TU 508 M YAR 208-108-2F 6 910 4 280 180 5 300 4.95

30,7 19 0,8 2,25
TU 1.11/16 TF TU 509 U YAR 209-111-2F 7 470 4 860 210 4 300 5.20

5.1
33,2 21,6 0,915 2,35
TU 1.3/4 TF TU 509 U YAR 209-112-2F 7 470 4 860 210 4 300 5.50

33,2 21,6 0,915 2,50
TU 1.15/16 TF TU 510 U YAR 210-115-2F 7 900 5 220 220 4 000 5.30

35,1 23,2 0,98 2,40
TU 2. TF TU 511 M YAR 211-200-2F 9 810 6 530 280 4 000 8.80

43,6 29 1,25 4,00
TU 2.3/16 TF TU 511 U YAR 211-203-2F 9 810 6 530 280 3 600 8.40

43,6 29 1,25 3,80
243
Y-bearing take-up units with a cast housing and an eccentric locking collar, metric shafts
d 20 – 55 mm
s1
A2 L3
N1
L2
B1
d H H1 D1 N H2
A1 L1
A L
Bearing unit
d A A1 A2 B1 D1 H H1 H2 L L1 L2 L3 N N1 s1
mm –
20 34 13,5 25 31 19 92 76 54 97 62 10 54 32 16 23,5 TU 20 FM
25 34 13,5 25 31 19 91 76 53 100 64 10 52 33 16 23,5 TU 25 FM
30 37 13,5 28 35,7 22 104 89 56 114 70 10 57 37 16 26,7 TU 30 FM
35 37 13,5 30 38,9 22 103 89 64 129 78 12 64 38 17 29,4 TU 35 FM
40 49 17,5 33 43,7 29 115 101 83 145 88 15 83 50 19 32,7 TU 40 FM
45 49 17,5 35 43,7 29 117 101 83 144 87 15 83 49 19 32,7 TU 45 FM
50 49 17,5 36 43,7 29 117 101 83 149 90 16 86 49 19 32,7 TU 50 FM
55 64 27 41 48,4 35 146 130 102 171 106 19 95 64 25 36,4 TU 55 FM
244
A5
Designations Basic load Fatigue Limiting Mass Appropriate end cover

Bearing unit Separate components ratings load speed Bearing Designation Dimension
Housing Bearing dynamic static limit with shaft unit A5
C C0 Pu tolerance
h6
– kN kN r/min kg – mm
TU 20 FM TU 504 M YET 204 12,7 6,55 0,28 8 500 0,73 ECY 204 18,5
TU 25 FM TU 505 M YET 205 14 7,8 0,335 7 000 0,77 ECY 205 18 5.2
TU 30 FM TU 506 M YET 206 19,5 11,2 0,475 6 300 1,25 ECY 206 20
TU 35 FM TU 507 M YET 207 25,5 15,3 0,655 5 300 1,45 ECY 207 22
TU 40 FM TU 508 M YET 208 30,7 19 0,8 4 800 2,30 ECY 208 23,5
TU 45 FM TU 509 M YET 209 33,2 21,6 0,915 4 300 2,30 ECY 209 23
TU 50 FM TU 510 M YET 210 35,1 23,2 0,98 4 000 2,40 ECY 210 29,5
TU 55 FM TU 511 M YET 211 43,6 29 1,25 3 600 3,85 ECY 211 34
245
SKF ConCentra ball bearings
and units
Design................................................................................................................... 249
247
SKF ConCentra ball bearings and units
SKF ConCentra ball bearings and units († fig. 1) Fig. 1

are part of SKF’s extensive line of ready-to-
install mounted products. SKF ConCentra ball
bearings and units, with true concentric location
on the shaft, are particularly well suited for
applications where there are relatively high
speeds and moderate loads and where vibra-
tion, low noise, and minimal maintenance are
key operational parameters. SKF ConCentra ball
bearings are available as single bearings or
assembled with plummer block or flanged
housings.
What sets the SKF ConCentra ball bearing
unit apart from any other Y-bearing unit is its
unique 360° locking mechanism. The locking
mechanism is based on two mating surfaces,
each with precision engineered inclined serra-
tions. One set of serrations is machined into the
bearing bore; the other set is machined into the Fig. 2
outside diameter of the shaft sleeve. The shaft

sleeve is also equipped with a mounting pres-
sure ring († fig. 2).
The 360° grip on the shaft virtually eliminates
the possibility of shaft damage and fretting
corrosion.
By tightening the grub (set) screws in the
mounting collar using the appropriate hexago-
nal key, the bearing inner ring is forced up the
inclined planes of the stepped sleeve, thus pro-
viding a true concentric tight fit on the shaft
(† fig. 3).
In order to assist the mounting of SKF
ConCentra ball bearing units, mounting kits are
available from SKF (designation 626830) which
include mounting instructions, hexagonal keys
and torque indicators. Typical applications of
SKF ConCentra ball bearings and units are Fig. 3
industrial fans, conveyor systems, textile

machines and agricultural machinery.
248
Design
SKF ConCentra ball bearing units are ready-
to-mount and ready-to-operate. They are filled
with a high-quality, long-lasting grease that
provides maintenance-free operation in most
cases. For operating conditions that make relu-
brication necessary, the units are provided with
a grease fitting.
SKF ConCentra ball bearings and units are
based on:
• SKF Y-bearings in the YSP 2 SB series

• the patented SKF ConCentra stepped sleeve
• cast iron housings in the SY 5(00) M, FY 5(00)
M and FYTB 5(00) M series, SY 5(00) M,
FY 5(00) M, FYTB 5(00) M series for metric
shafts
• cast iron housings in the SY 5(00) U/AH,
FY 5(00) U/AH, FYTB 5(00) U/AH series for
inch shafts
Detailed information about these bearing units

can be found in the publication SKF ConCentra
ball bearing units – true concentric locking, for
fast and reliable mounting and online at
skf.com/bearings.
249
SKF Food Line Y-bearing units
Designs ................................................................................................................. 252
251
SKF Food Line Y-bearing units
To meet the requirements of the food, beverage The sealing arrangement, proven to be highly
and pharmaceutical processing industries, SKF effective during washdowns, consists of a stain-
has developed a special range of Y-bearing units. less steel supported, grease filled, multi-lip FDA
The housings for SKF Food Line Y-bearing approved synthetic rubber contacting and laby-
units are made of three different materials: rinth seal with a stainless steel flinger. († fig. 1).
The SKF Food Line Y-bearing units are
• Composite with dedicated rugged design pre-lubricated for life with a non-toxic food-
• Cast stainless steel for heavy-duty grade grease, based on a PAO oil and an
applications aluminium-complex soap as a thickener (food
• Zinc-coated cast iron for a cost-effective solution industry approved NSF H1).
The units are equipped with Y-bearings made of

stainless steel (YAR 2-2RF/HV series) or of high Designs
quality, carbon chromium steel with zinc coated
inner and outer rings (YAR 2-2RF/VE495 series). SKF Food Line Y-bearing units with
The bearing inner rings are extended on both composite housings
sides and are locked on the shaft with grub screws.
Strong, lightweight, chemical resistant
Fig. 1 Capable of resisting citric acids, cooking fats and
most food and beverage processing chemicals,
composite SKF Food Line Y-bearing housings
are made from a thermoplastic material that is
lighter than cast iron housings. The housing’s
spherical bore accommodates the insert bear-
ing’s spherical outer surface, enabling the unit
to compensate for initial misalignment.
Other performance advantages include:
• High fracture strength – dedicated rugged

design contributes to its fracture strength.
Radial breaking load is far greater than the
static load rating of the bearing. SKF Food
Line Y-bearing units are estimated to have the
highest fracture strength of any composite
unit on the market.
• Flush mounting – A polyamide filled housing
Fig. 2 base or a solid base allow the units to seat
flush with the mounting surface. This surface-
to-surface mounting eliminates gaps where
contaminants could potentially collect.
• Stability – Stainless steel bolt-hole inserts
provide added strength and stability to each
housing foot.
Housing designs
SKF Food Line Y-bearing unit composite housings
are available in the following designs († fig. 2):
• plummer block
• two- and four-bolt flange (oval or square shape)
• tapped base
• three-bolt bracket flange
• take-up
252
Bearing designs SKF Food Line Y-bearing units with
SKF Food Line Y-bearing units with composite coated cast iron housings
housings are available with Y-bearings made of
stainless steel (YAR 2-2RF/HV series) or of high Strong and corrosion resistant
quality carbon chromium steel with zinc coated Strength, durability and long-term corrosion
inner and outer rings (YAR 2-2RF/VE495 series). resistance make coated cast iron SKF housings
an ideal choice for red meat, pork and poultry
processing applications.
SKF Food Line Y-bearing units with The heavy-duty cast iron is protected with a
stainless steel housings CrVl-free zinc coating on all housing surfaces for
long-term corrosion resistance. The zinc coating
Extreme strength and toughness eliminates the flaking problems associated with
For extremely challenging food and beverage nickel plated products.
applications requiring superior durability and
chemical resistance, housings cast from Chemical resistance – These zinc coated hous-
AISI 300 stainless steel may be the best solution. ings are resistant to the majority of common
washdown solutions.
Strength – Y-bearing housings are designed for
applications where very heavy loads or shock Housing designs
loads are possible. Coated cast iron SKF FL Y-bearing housings are
Safety – In applications where housing failure available in the following designs:
could result in injury, the safety factor inherent • plummer blocks
in cast steel is an advantage. • two- or four-bolt flange (oval or square shape)
Chemical resistance – Compared to composite • tapped base
and zinc coated cast iron housings, cast stainless
steel offers a higher level of resistance to Bearing designs
aggressive washdown chemicals. Cast stainless SKF Food Line Y-bearing units with coated cast
housings are not affected by strong concentra- iron housings are available with Y-bearings
tions of chlorine, hydrogen peroxide or other made of high quality carbon chromium steel
chemicals. with zinc coated inner and outer rings (YAR
Smooth surfaces – The smooth surfaces of cast 2-2RF/VE495 series).
SKF stainless steel housings make them easier
to clean.The bases are machined flat with no
recesses to trap debris and bacteria, and the End covers
exposed surfaces have no unnecessary crevices
or pockets. Secure fit, operator safety
To enhance worker safety, SKF recommends
Housing designs using end covers in any situation where a shaft
Stainless steel SKF Food Line Y-bearing housings protrudes from a housing and is not otherwise 7
are available in the following designs († fig. 2): safely and adequately guarded. Special End
Covers, types ECW and ECL, are available for all
• plummer block SKF Food Line Y-bearing units and must be
• two- and four-bolt flange (oval or square ordered separately.
shape)
• tapped base Detailed information about SKF end covers can
be found in the publication SKF Food Line
Bearing designs Y-bearing units – a maintenance-free solution
SKF Food Line Y-bearing units with stainless for wet, abrasive and contaminating environ-
steel housings are available with Y-bearings ments or in the product information available
made of stainless steel (YAR 2-2RF/HV series). online at skf.com/bearings.
253
Product index
The product range listed in this catalogue includes

almost 1 000 Y-bearings, Y-bearing units,
Y-bearing housings, rubber seating rings, end
covers and adapter sleeves. In order to enable
the user to quickly find the technical data for a
product known only by its designation, the prod-
ucts are listed by designation in alphanumerical
order in this index. Each entry lists the page
number on which the product can be found
and gives a brief description of the product.
255
Product index
Designation Product Product

table
No. Page
17262.. . . . . . . . . . . . . . Y-bearing with a standard inner ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.4 . . . . 108

17263.. . . . . . . . . . . . . . Y-bearing with a standard inner ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.4 . . . . 108
ECY 2.. . . . . . . . . . . . . . . End cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1 . . . . 120

End cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.2 . . . . 122
End cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.3 . . . . 134
End cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1 . . . . 174
End cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.2 . . . . 176
End cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.3 . . . . 178
End cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.4 . . . . 188
End cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.6 . . . . 200
End cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.7 . . . . 208
End cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.1 . . . . 238
End cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.2 . . . . 244
FY .. FM . . . . . . . . . . . . . . Flanged Y-bearing unit with a cast housing with a square flange and eccentric locking collar. 4.4 . . . . 188
FY .. RM . . . . . . . . . . . . . . Flanged Y-bearing unit with a cast housing with a square flange and grub screws . . . . . . . . . 4.3 . . . . 184
FY .. TF . . . . . . . . . . . . . . Flanged Y-bearing unit with a cast housing with a square flange and grub screws . . . . . . . . . 4.3 . . . . 178
FY .. TR . . . . . . . . . . . . . . Flanged Y-bearing unit with a cast housing with a square flange and grub screws . . . . . . . . . 4.3 . . . . 178
FY .. WF . . . . . . . . . . . . . . Flanged Y-bearing unit with a cast housing with a square flange and eccentric locking collar. 4.4 . . . . 188
FY 5.. M . . . . . . . . . . . . . . Flanged housing with a square flange, cast iron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.3 . . . . 178
Flanged housing with a square flange, cast iron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.4 . . . . 188
FY 5.. U . . . . . . . . . . . . . . Flanged housing with a square flange, cast iron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.3 . . . . 182
FYC .. TF . . . . . . . . . . . . . Flanged Y-bearing unit with a cast housing with a round flange and grub screws . . . . . . . . . . 4.9 . . . . 218
FYC 5.. . . . . . . . . . . . . . . Flanged housing with a round flange, cast iron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.9 . . . . 218
FYJ .. KF . . . . . . . . . . . . . Flanged Y-bearing unit with a cast housing with a square flange and tapered bore . . . . . . . . 4.5 . . . . 194
FYJ .. TF . . . . . . . . . . . . . Flanged Y-bearing unit with a cast housing with a square flange and grub screws . . . . . . . . . 4.3 . . . . 178
FYJ 5.. . . . . . . . . . . . . . . Flanged housing with a square flange, cast iron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.3 . . . . 178
FYK .. TF . . . . . . . . . . . . . Flanged Y-TECH unit with a housing with a square flange and grub screws . . . . . . . . . . . . . . 4.1 . . . . 174
FYK .. TR . . . . . . . . . . . . . Flanged Y-TECH unit with a housing with a square flange and grub screws . . . . . . . . . . . . . . 4.1 . . . . 174
FYK 5.. . . . . . . . . . . . . . . Flanged Y-TECH housing with a square flange, composite material . . . . . . . . . . . . . . . . . . . . 4.1 . . . . 174
FYM .. TF . . . . . . . . . . . . . Flanged Y-bearing unit with a cast housing with a square flange and grub screws . . . . . . . . . 4.3 . . . . 184
FYT .. FM . . . . . . . . . . . . . Flanged Y-bearing unit with a cast housing with an oval flange and eccentric locking collar . . 4.7 . . . . 210
FYT .. RM . . . . . . . . . . . . Flanged Y-bearing unit with a cast housing with an oval flange and grub screws . . . . . . . . . . 4.6 . . . . 202
FYT .. TF . . . . . . . . . . . . . Flanged Y-bearing unit with a cast housing with an oval flange and grub screws . . . . . . . . . . 4.6 . . . . 202
FYT 5.. U . . . . . . . . . . . . . Flanged housing with an oval flange, cast iron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.6 . . . . 202
Flanged housing with an oval flange, cast iron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.7 . . . . 210
FYTB .. FM . . . . . . . . . . . Flanged Y-bearing unit with a cast housing with an oval flange and eccentric locking collar . . 4.7 . . . . 208
FYTB .. TF . . . . . . . . . . . . Flanged Y-bearing unit with a cast housing with an oval flange and grub screws . . . . . . . . . . 4.6 . . . . 200
FYTB .. TR . . . . . . . . . . . . Flanged Y-bearing unit with a cast housing with an oval flange and grub screws . . . . . . . . . . 4.6 . . . . 200
FYTB .. WF . . . . . . . . . . . Flanged Y-bearing unit with a cast housing with an oval flange and eccentric locking collar . . 4.7 . . . . 208
FYTB 5.. M . . . . . . . . . . . Flanged housing with an oval flange, cast iron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.6 . . . . 200
FYTBK .. TF . . . . . . . . . . . Flanged Y-TECH unit with a housing with an oval flange and grub screws . . . . . . . . . . . . . . . 4.2 . . . . 176
FYTBK .. TR . . . . . . . . . . Flanged Y-TECH unit with a housing with an oval flange and grub screws . . . . . . . . . . . . . . . 4.2 . . . . 176
FYTBK 5.. . . . . . . . . . . . Flanged Y-TECH housing with an oval flange . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.2 . . . . 176
FYTJ .. KF . . . . . . . . . . . . Flanged Y-bearing unit with a cast housing with an oval flange and adapter sleeve . . . . . . . . 4.8 . . . . 214
FYTJ .. TF . . . . . . . . . . . . Flanged Y-bearing unit with a cast housing with an oval flange and grub screws . . . . . . . . . . 4.6 . . . . 200
FYTJ 5.. . . . . . . . . . . . . . Flanged housing with an oval flange, cast iron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.6 . . . . 200
256
table
No. Page
H 23 .. . . . . . . . . . . . . . . Adapter sleeve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.4 . . . . 142

Adapter sleeve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5 . . . . 194
Adapter sleeve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.8 . . . . 214
HA 23 .. . . . . . . . . . . . . . Adapter sleeve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.4 . . . . 144
Adapter sleeve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5 . . . . 196
Adapter sleeve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.8 . . . . 216
HE 23 .. . . . . . . . . . . . . . Adapter sleeve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.4 . . . . 144
Adapter sleeve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5 . . . . 196
Adapter sleeve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.8 . . . . 216
HE 23 .. B . . . . . . . . . . . . Adapter sleeve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.4 . . . . 144
HS 23 .. . . . . . . . . . . . . . Adapter sleeve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.4 . . . . 144
Adapter sleeve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5 . . . . 196
P .. FM . . . . . . . . . . . . . . . Y-bearing plummer block unit with a pressed steel housing and eccentric locking collar . . . . 3.8 . . . . 158
P .. RM. . . . . . . . . . . . . . . Y-bearing plummer block unit with a pressed steel housing and grub screws . . . . . . . . . . . . . 3.7 . . . . 152
P .. TF . . . . . . . . . . . . . . . Y-bearing plummer block unit with a pressed steel housing and grub screws . . . . . . . . . . . . . 3.7 . . . . 152
P .. TR . . . . . . . . . . . . . . . Y-bearing plummer block unit with a pressed steel housing and grub screws . . . . . . . . . . . . . 3.7 . . . . 152
P .. WF. . . . . . . . . . . . . . . Y-bearing plummer block unit with a pressed steel housing and eccentric locking collar . . . . 3.8 . . . . 158
P .. . . . . . . . . . . . . . . . . . Plummer block housing, pressed steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.7 . . . . 152
Plummer block housing, pressed steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.8 . . . . 158
PF .. FM . . . . . . . . . . . . . . Flanged Y-bearing unit with a pressed steel housing

with a round flange and eccentric locking collar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.11 . . . 228
PF .. RM . . . . . . . . . . . . . Flanged Y-bearing unit with a pressed steel housing with a round flange and grub screws . . 4.10 . . . 220
PF .. TF . . . . . . . . . . . . . . Flanged Y-bearing unit with a pressed steel housing with a round flange and grub screws . . 4.10 . . . 220
PF .. TR . . . . . . . . . . . . . . Flanged Y-bearing unit with a pressed steel housing with a round flange and grub screws . . 4.10 . . . 220
PF .. WF . . . . . . . . . . . . . Flanged Y-bearing unit with a pressed steel housing
with a round flange and eccentric locking collar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.11 . . . 228
PF .. . . . . . . . . . . . . . . . . Flanged housing with a round flange, pressed steel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.10 . . . 220
Flanged housing with a round flange, pressed steel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.11 . . . 228
PFD .. FM . . . . . . . . . . . . Flanged Y-bearing unit with a pressed steel housing

with a triangular flange and eccentric locking collar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.11 . . . 228
PFD .. RM . . . . . . . . . . . . Flanged Y-bearing unit with a pressed steel housing with a triangular flange and grub screws . 4.10 . . . 220
PFD .. TF . . . . . . . . . . . . . Flanged Y-bearing unit with a pressed steel housing with a triangular flange and grub screws . 4.10 . . . 220
PFD .. TR. . . . . . . . . . . . . Flanged Y-bearing unit with a pressed steel housing with a triangular flange and grub screws . 4.10 . . . 220
PFD .. WF . . . . . . . . . . . . Flanged Y-bearing unit with a pressed steel housing
with a triangular flange and eccentric locking collar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.11 . . . 228
PFD .. . . . . . . . . . . . . . . . Flanged housing with a triangular flange, pressed steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.10 . . . 220
Flanged housing with a triangular flange, pressed steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.11 . . . 228
PFT .. FM . . . . . . . . . . . . Flanged Y-bearing unit with a pressed steel housing

with an oval flange and eccentric locking collar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.11 . . . 228
PFT .. RM . . . . . . . . . . . . Flanged Y-bearing unit with a pressed steel housing with an oval flange and grub screws . . . 4.10 . . . 220
PFT .. TF . . . . . . . . . . . . . Flanged Y-bearing unit with a pressed steel housing with an oval flange and grub screws . . . 4.10 . . . 220
PFT .. TR . . . . . . . . . . . . . Flanged Y-bearing unit with a pressed steel housing with an oval flange and grub screws . . . 4.10 . . . 220
PFT .. WF . . . . . . . . . . . . Flanged Y-bearing unit with a pressed steel housing
with an oval flange and eccentric locking collar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.11 . . . 228
PFT .. . . . . . . . . . . . . . . . Flanged housing with an oval flange, pressed steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.10 . . . 220
Flanged housing with an oval flange, pressed steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.11 . . . 228
RIS 2.. . . . . . . . . . . . . . . Rubber seating ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.7 . . . . 152

Rubber seating ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.8 . . . . 158
SY .. FM . . . . . . . . . . . . . . Y-bearing plummer block unit with a cast housing and eccentric locking collar. . . . . . . . . . . . 3.3 . . . . 134
SY .. TF . . . . . . . . . . . . . . Y-bearing plummer block unit with a cast housing and grub screws . . . . . . . . . . . . . . . . . . . . 3.2 . . . . 122
SY .. TR . . . . . . . . . . . . . . Y-bearing plummer block unit with a cast housing and grub screws . . . . . . . . . . . . . . . . . . . . 3.2 . . . . 122
SY .. WF. . . . . . . . . . . . . . Y-bearing plummer block unit with a cast housing and eccentric locking collar. . . . . . . . . . . . 3.3 . . . . 134
SY 5.. M . . . . . . . . . . . . . . Plummer block housing, cast iron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.2 . . . . 122
Plummer block housing, cast iron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.3 . . . . 134
SY 5.. U . . . . . . . . . . . . . . Plummer block housing, cast iron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.2 . . . . 126
Plummer block housing, cast iron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.3 . . . . 136 8
SYF .. FM . . . . . . . . . . . . . Y-bearing plummer block unit with a cast housing and eccentric locking collar. . . . . . . . . . . . 3.6 . . . . 150
SYF .. TF . . . . . . . . . . . . . Y-bearing plummer block unit with a cast housing and grub screws . . . . . . . . . . . . . . . . . . . . 3.5 . . . . 148
SYF 5.. . . . . . . . . . . . . . . Plummer block housing, short base, cast iron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.5 . . . . 148
Plummer block housing, short base, cast iron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.6 . . . . 150
SYFJ .. TF . . . . . . . . . . . . Y-bearing plummer block unit with a cast housing and grub screws . . . . . . . . . . . . . . . . . . . . 3.5 . . . . 148
SYFJ 5.. . . . . . . . . . . . . . Plummer block housing, short base, cast iron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.5 . . . . 148
257
Product index

table
No. Page
SYH .. FM . . . . . . . . . . . . Y-bearing plummer block unit with a cast housing and eccentric locking collar. . . . . . . . . . . . 3.3 . . . . 136
SYH .. TF . . . . . . . . . . . . . Y-bearing plummer block unit with a cast housing and grub screws . . . . . . . . . . . . . . . . . . . . 3.2 . . . . 126
SYH .. WF . . . . . . . . . . . . Y-bearing plummer block unit with a cast housing and eccentric locking collar. . . . . . . . . . . . 3.3 . . . . 136
SYH 5.. U . . . . . . . . . . . . . Plummer block housing, cast iron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.2 . . . . 126
SYJ .. KF . . . . . . . . . . . . . Y-bearing plummer block unit with a cast housing and tapered bore . . . . . . . . . . . . . . . . . . . 3.4 . . . . 142
SYJ .. TF . . . . . . . . . . . . . Y-bearing plummer block unit with a cast housing and grub screws . . . . . . . . . . . . . . . . . . . . 3.2 . . . . 122
SYJ 5.. . . . . . . . . . . . . . . Plummer block housing, cast iron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.2 . . . . 122
SYK .. TF . . . . . . . . . . . . . Y-TECH plummer block unit with grub screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1 . . . . 120
SYK .. TR . . . . . . . . . . . . . Y-TECH plummer block unit with grub screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1 . . . . 120
SYK 5.. . . . . . . . . . . . . . . Y-TECH plummer block housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1 . . . . 120
SYM .. TF. . . . . . . . . . . . . Y-bearing plummer block unit for air handling systems with a cast housing and grub screws 3.2 . . . . 128
SYM 5.. U . . . . . . . . . . . . Plummer block housing, cast iron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.2 . . . . 128
TU .. FM . . . . . . . . . . . . . Y-bearing take-up unit with a cast housing and eccentric locking collar . . . . . . . . . . . . . . . . . 5.2 . . . . 244
TU .. TF . . . . . . . . . . . . . . Y-bearing take-up unit with a cast housing and grub screws . . . . . . . . . . . . . . . . . . . . . . . . . 5.1 . . . . 238
TU 5.. M . . . . . . . . . . . . . Take-up housing, cast iron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.1 . . . . 238
Take-up housing, cast iron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.2 . . . . 244
TU 5.. U . . . . . . . . . . . . . . Take-up housing, cast iron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.1 . . . . 240
TUJ .. TF . . . . . . . . . . . . . Y-bearing take-up unit with a cast housing and grub screws . . . . . . . . . . . . . . . . . . . . . . . . . 5.1 . . . . 238
TUJ 5.. . . . . . . . . . . . . . . Take-up housing, cast iron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.1 . . . . 238
YAR 2.. -2F . . . . . . . . . . . Y-bearing with grub screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.1 . . . . 92

YAR 2.. -2RF . . . . . . . . . . Y-bearing with grub screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.1 . . . . 92
YAR 2.. -2RF/HV . . . . . . . Stainless steel Y-bearing with grub screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.1 . . . . 92
YAR 2.. -2RF/VE495 . . . . Y-bearing with grub screws for the food industry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.1 . . . . 92
YAT 2.. . . . . . . . . . . . . . . Y-bearings with grub screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.1 . . . . 92
YEL 2.. -2F . . . . . . . . . . . Y-bearing with eccentric locking collar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2 . . . . 100
YEL 2.. -2RF . . . . . . . . . . Y-bearing with eccentric locking collar, rubberized flinger . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2 . . . . 100
YET 2.. . . . . . . . . . . . . . . Y-bearing with eccentric locking collar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2 . . . . 100
YSA 2.. -2FK . . . . . . . . . . Y-bearing with a tapered bore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.3 . . . . 104
258
8
259
skf.com

Y-Bearings and Y-Bearing Units

Uploaded by

Copyright:

Available Formats

Y-Bearings and Y-Bearing Units

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Y-Bearings and Y-Bearing Units

Uploaded by

Copyright:

Available Formats

Y-bearings

and Y-bearing units

© SKF Group 2013

P U B B U / P 1 13728 E N · June 2013

This publication supersedes catalogue 06001 EN.

Y-bearing plummer block units ................................... 111

Flanged Y-bearing units .............................................. 163

Y-bearing take-up units .............................................. 235

SKF ConCentra ball bearings and units ........................ 247

SKF Food Line Y-bearing units .................................... 251

Product index ............................................................. 255

From one simple but inspired solution to a

SKF Solution Factory makes

Working with SKF IT and

Our knowledge Design and develo

help our customers to be more ta

Working closely with you improve machine performance by looking at the

Actuation and motion control

SKF – the knowledge engineering company .................................................................. 4

1 Principles of selection and application................................................................. 15

3 Y-bearing plummer block units........................................................................... 111

4 Flanged Y-bearing units ..................................................................................... 163

5 Y-bearing take-up units ..................................................................................... 235

6 SKF ConCentra ball bearings and units ................................................................ 247

7 SKF Food Line Y-bearing units ............................................................................ 251

8 Product index.................................................................................................... 255

This catalogue provides a representative over-

Quantity Unit Conversion

Length inch 1 mm 0,03937 in 1 in 25,40 mm

Area square inch 1 mm2 0,00155 sq.in 1 sq.in 645,16 mm2

Volume cubic inch 1 cm3 0,061 cub.in 1 cub.in 16,387 cm3

Mass ounce 1g 0,03527 oz 1 oz 28,350 g

Density pound per 1 g/cm3 0,0361 lb/cub.in 1 lb/cub.in 27,680 g/cm3

Force pound-force 1N 0,225 lbf 1 lbf 4,4482 N

Pressure, pounds per 1 MPa 145 psi 1 psi 6,8948 ¥ 103 Pa

Moment inch pound-force 1 Nm 8,85 in.lbf 1 in.lbf 0,113 Nm

Power foot-pound per 1W 0,7376 ft lbf/s 1 ft lbf/s 1,3558 W

Temperature degree Celsius tC = 0,555 (tF – 32) Fahrenheit tF = 1,8 tC + 32

Selection of Y-bearing unit type .............................................................................. 24

Selection of Y-bearing unit size ............................................................................... 30

Design of Y-bearing arrangements .......................................................................... 40

Lubrication and maintenance .................................................................................. 48

Mounting instructions ............................................................................................ 52

Storing Y-bearings and Y-bearing units ................................................................... 74

Designation systems .............................................................................................. 75

• an insert bearing (a single row deep groove

Y-bearing units can accommodate moderate

• Y-bearing plummer block units

The housings are available in: Fig. 2

• composite material († fig. 2)

SKF Y-bearing units provide designers with con-

• Y-bearing take-up units

Essentially, these terms are in accordance with

• ISO 3228:1993 Rolling bearings – Cast and

A detailed collection of bearing specific terms

Insert bearings, wide inner ring bearings

Inner ring with an eccentric locking collar

Inner ring with two grub screws

Inner ring with a tapered bore