NANJING SWANSOFT TECHNOLOGY COMPANY

SSCNC Turning Tutorials

V1.2 10/04/2012

1
Tianzheng Guoji Plaza, Suite 5, Room 402, 399 Zhongyang Road, Nanjing, Jiangsu 210037 CHINA
 NANJING SWANSOFT TECHNOLOGY COMPANY

Table of Contents
Tutorial 1 – Running an existing program...........................................................................................................................3
Start the software .........................................................................................................................................................................4
Move the axes to the machine origin ...........................................................................................................................................4
Select an NC program from the Directory ...................................................................................................................................5
Define the raw material................................................................................................................................................................5
Mount tools on the turret..............................................................................................................................................................6
Set the workpiece origin ..............................................................................................................................................................6
Execute the NC program............................................................................................................................................................10
Measure the Workpiece..............................................................................................................................................................10
Tutorial 2 – Importing a program ..................................................................................................................................................11
Start a new CNC program..........................................................................................................................................................12
Create a text file with the NC program ......................................................................................................................................12
Import the NC program and run it .............................................................................................................................................14
Tutorial 3 – Entering a program at the operating panel...............................................................................................15
Enter the NC program................................................................................................................................................................16
Tutorial 4 – Changing the tool library .................................................................................................................................17
Adding a new tool......................................................................................................................................................................17

2
Tianzheng Guoji Plaza, Suite 5, Room 402, 399 Zhongyang Road, Nanjing, Jiangsu 210037 CHINA
 NANJING SWANSOFT TECHNOLOGY COMPANY

Tutorial 1 – Running an existing program

This tutorial shows

Simulating an existing NC program

Part drawing

Blank dimension Dia. 70 x 150mm

3
Tianzheng Guoji Plaza, Suite 5, Room 402, 399 Zhongyang Road, Nanjing, Jiangsu 210037 CHINA
 NANJING SWANSOFT TECHNOLOGY COMPANY

Start the software

Select Network on the left.

Select Fanuc 0iT for the CNC system.

Enter your user name and password.

Enter the IP address of server.

Click on Run.

Move the axes to the machine origin

Release the Emergency stop by pressing on it.

Unlock the Edit lock by moving the cursor to the key and

pressing on it.

Press the X button to move the X axis to the origin.

Press the Z button to move the Z axis to the origin.

4
Tianzheng Guoji Plaza, Suite 5, Room 402, 399 Zhongyang Road, Nanjing, Jiangsu 210037 CHINA
 NANJING SWANSOFT TECHNOLOGY COMPANY

Select an NC program from the Directory

Switch to the Edit mode by pressing on the Edit mode button

Press the Program mode key , then press the DIR soft key to
see the directory (list) of NC programs in the machine.

Type O0002 by pressing the keys in order, then press to

make this the active program.

Define the raw material

Select Workpiece - Stock Size

Enter the following data and click on OK:

For Workpiece material, select '08F Low carbon steel'.

For Length, enter 150

For Diameter, enter 70

5
Tianzheng Guoji Plaza, Suite 5, Room 402, 399 Zhongyang Road, Nanjing, Jiangsu 210037 CHINA
 NANJING SWANSOFT TECHNOLOGY COMPANY

Mount tools on the turret

Select Machine Operation - Tool Management

Drag the first tool (001) in the list of tools to row 01 in the Tool
magazine list.

Click on Mount Tool

Click OK.

Set the workpiece origin

Setting work offset- X0

Start the spindle in the MDI (manual data input) mode.

To do this, press MDI mode , then type S300 M03 ,

then press cycle start to start the spindle.

6
Tianzheng Guoji Plaza, Suite 5, Room 402, 399 Zhongyang Road, Nanjing, Jiangsu 210037 CHINA
 NANJING SWANSOFT TECHNOLOGY COMPANY

Do a skin cut on the diameter for setting X0.

Move the tool to the appropriate position for doing a light cut on the
diameter.

If the tool is far away from the part, press on Jog mode and

then on . Press on or to select the axis of

motion, and then on or to select the direction of

motion.

When the tool is closer to the part, switch to 1 mm. steps. Select

and (1000 microns or 1 mm).

Once the tool is at the required diameter, press on Z and keep

pressing on - to do the skin cut.

Back off the tool along +Z.

Stop the spindle by pressing on .

Select Measure - Feature Line to measure the outer diameter.

Measure the diameter by pressing over it and note the value.

7
Tianzheng Guoji Plaza, Suite 5, Room 402, 399 Zhongyang Road, Nanjing, Jiangsu 210037 CHINA
 NANJING SWANSOFT TECHNOLOGY COMPANY

Select Measure → Exit Measure.

Press on the Offset setting mode .

Press on the soft key under Offset, then the one under Geom.

Select the G001 line with the help of arrow keys on the control panel.

Type the measured diameter value on the address line.

E.g., : X69.118

Press on the MEASUR softkey.

This sets the coordinate of the tool position. The controller
determines the X0 using this.

Setting work offset – Z0

Press on to start spindle rotation in the anti-clockwise

direction.

Do a facing cut for setting Z0.

8
Tianzheng Guoji Plaza, Suite 5, Room 402, 399 Zhongyang Road, Nanjing, Jiangsu 210037 CHINA
 NANJING SWANSOFT TECHNOLOGY COMPANY

Move the tool to the appropriate position for doing a light cut on the
face.

If the tool is far away from the part, press on Jog mode and

then on . Press on or to select the axis of

motion, and then on or to select the direction of

motion.

When the tool is closer to the part, switch to 1 mm. steps. Select

and .

Once the tool is at the required Z position to do the face cut, press
on X and keep pressing on - to do the skin cut.

After the facing, press on OFFSET SETTING mode

Press on OFFSET - GEOM input Z0 then press MEASUR.

Press on Reference mode then press and

to send the axes to their home positions.

9
Tianzheng Guoji Plaza, Suite 5, Room 402, 399 Zhongyang Road, Nanjing, Jiangsu 210037 CHINA
 NANJING SWANSOFT TECHNOLOGY COMPANY

Execute the NC program

Never run a machine with the door open. It can lead to a serious or even fatal accident.

Press on the Auto mode

Close the machine door by pressing on Close Machine Door

button on the left side of the screen.

Press Cycle start button to start machining.

Measure the Workpiece

Select Measure - Feature Line

Click on any point at which you want the dimension.

If the part diameter is less than 36 mm. the measuring instrument automatically changes to a micrometer. For bores the
instrument changes to a bore gauge.

10
Tianzheng Guoji Plaza, Suite 5, Room 402, 399 Zhongyang Road, Nanjing, Jiangsu 210037 CHINA
 NANJING SWANSOFT TECHNOLOGY COMPANY

Tutorial 2 – Importing a program

This tutorial shows

Importing an NC program from a text file and running it.

Part drawing

Blank dimension Dia. 80 x 100mm

11
Tianzheng Guoji Plaza, Suite 5, Room 402, 399 Zhongyang Road, Nanjing, Jiangsu 210037 CHINA
 NANJING SWANSOFT TECHNOLOGY COMPANY

Start a new CNC program

Select Edit mode

Switch to the Program mode. Press the button and press

DIR to see the programs already in use.

Start a new program number 1111. To do this, press O1111, then

Create a text file with the NC program

Open Notepad and copy the NC program listed here into it. NC program

O1111
Save the program under the file name 1111.txt.
T0101
G50 S3500
G96 S240 M4
G00 X82. Z0.
G01 X-2. F0.15 M7
G00 Z2.
G00 X71.
G01 Z-47.8 F0.3
G01 X74. Z-49.8
G01 X77.
G01 X81. Z-53.
G00 Z2.
G00 X60.
G01 Z-19.8
G01 X65.
G01 X72. Z-24.
G00 Z2.
G00 X51.
G01 Z-16.8
G01 X57. Z-19.8
G01 X65.

12
Tianzheng Guoji Plaza, Suite 5, Room 402, 399 Zhongyang Road, Nanjing, Jiangsu 210037 CHINA
NANJING SWANSOFT TECHNOLOGY COMPANY

G00 Z2.
G00 X37.
G01 X52. Z-6.
G00 X150. Z100.
M5
M9
M30

13
Tianzheng Guoji Plaza, Suite 5, Room 402, 399 Zhongyang Road, Nanjing, Jiangsu 210037 CHINA
 NANJING SWANSOFT TECHNOLOGY COMPANY

Import the NC program and run it

Press the File Open button , select the file 1111.txt that you
just saved. Then select Open.

Define the raw material.

Workpiece material – 08F Low carbon steel

Length= 100
Diameter= 80

Mount the tool on the turret.

Set the workpiece origin.

Execute the program.

14
Tianzheng Guoji Plaza, Suite 5, Room 402, 399 Zhongyang Road, Nanjing, Jiangsu 210037 CHINA
 NANJING SWANSOFT TECHNOLOGY COMPANY

Tutorial 3 – Entering a program at the operating panel

This tutorial shows

Manual input of NC program through the operation panel.

Part drawing

Blank dimension Dia.100 x 107mm

15
Tianzheng Guoji Plaza, Suite 5, Room 402, 399 Zhongyang Road, Nanjing, Jiangsu 210037 CHINA
 NANJING SWANSOFT TECHNOLOGY COMPANY

Enter the NC program

NC program

Switch to the Edit mode, enter a new program number 2222. O2222
T0101
Press on the down arrow key to move to the next block. Enter G50 S3000
the program listed here. G96 S139 M04
X105. Z4. M08
X104.
To do this, press T0101 . G72 W3. R0.5
G72 P25 Q40 U0. W0.2 F0.3
N25 G0 Z0.

Press G50 S3000 . N30 G01 X100. Z0.

N35 X-1.
etc. N40 Z2.

continue this till the last block (this is the name for a line of NC G0 X105.
Z2.2
program).
X104.
G71 U3. R0.5
G71 P45 Q120 U0. W0. F0.3
N45 G00 X20.
N50 G01 X20. Z0.2
N55 Z0.
N60 G03 X30. Z-5. I0. K-5.
N65 G01 Z-26.
N70 G02 X38. Z-30. I4. K0.
N75 G01 X44.
N80 X50. Z-33.
N85 Z-47.
N90 G02 X56. Z-50. I3. K0.
N95 G01 X60. Z-52.
N100 Z-67.
N105 G02 X66. Z-70. I3. K0.
N110 G01 X88.
N115 X100. Z-76.
N120 X104. Z-76.
G0 X105.
M09
M05
X200. Z100.
M30

16
Tianzheng Guoji Plaza, Suite 5, Room 402, 399 Zhongyang Road, Nanjing, Jiangsu 210037 CHINA
 NANJING SWANSOFT TECHNOLOGY COMPANY

Define the raw material.

Workpiece material – 08F Low carbon steel

Length= 107
Diameter= 100

Mount the tool on the turret.

Set the workpiece origin.

Execute the program.

Tutorial 4 – Changing the tool library

This tutorial shows

Entering a new tool in the list of tools.

Adding a new tool

Select Machine Operation → Tool Management

17
Tianzheng Guoji Plaza, Suite 5, Room 402, 399 Zhongyang Road, Nanjing, Jiangsu 210037 CHINA
 NANJING SWANSOFT TECHNOLOGY COMPANY

Click on Add , select the first External turning tool and enter the
following data.

Tool – 01

Insert Type – 35° VNMG

Shank – 150

Shank width – 25 mm

Insert length – 12

Insert thickness – 3.0

Nose radius - 0.4 mm

Click on OK.

18
Tianzheng Guoji Plaza, Suite 5, Room 402, 399 Zhongyang Road, Nanjing, Jiangsu 210037 CHINA