Scribd
Upload
144 views9 pages

XPG RGB Software User Guide - EN - 20190705

The document provides instructions for customizing RGB lighting profiles and effects using XPG RGB software. It explains how to select profiles and LEDs, adjust colors, brightness, speed and direction of 15 different lighting effects (static, breathing, strobing, cycle, rainbow, comet, flashing, waving, glowing yoyo, starry night, etc.). The user can customize colors through RGB values, a color wheel, or preset colors, and saves settings by clicking "Apply".

Uploaded by

Silvester Erlangga
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
144 views9 pages

XPG RGB Software User Guide - EN - 20190705

The document provides instructions for customizing RGB lighting profiles and effects using XPG RGB software. It explains how to select profiles and LEDs, adjust colors, brightness, speed and direction of 15 different lighting effects (static, breathing, strobing, cycle, rainbow, comet, flashing, waving, glowing yoyo, starry night, etc.). The user can customize colors through RGB values, a color wheel, or preset colors, and saves settings by clicking "Apply".

Uploaded by

Silvester Erlangga
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

www.xpg.

com

XPG RGB Software Instruction


1. Profiles

 Area 1: There are four profiles for you to customize. Select the profile,
customize it, and click “Apply” to save the profile settings.
 Area 2: Clicking on the “Reset” button will revert the profile back to its
default settings.
 Area 3: Click “Apply” to save your customized profile settings.
2. Lighting Effect ─ Static

 Area 1: Click on the desired LED (“LED 1 to LED 8”) to be adjusted. To sync
all the LEDs with “LED 1” click “Sync to LED 1.”
 Area 2: Adjust colors as follows:
www.xpg.com

① Click on the desired color on the color ring (or drag the white knob
onto the desired color).
② Input the RGB values directly (or drag the white knobs corresponding
to R, G, B, S). S is color saturation.
③ Input HEX value directly
 Area 3: Five preset colors
Area 4: LED On/Off switch
Area 5: Brightness adjustment
After achieving the desired settings, click “Apply” to save.
3. Lighting Effect ─ Breathing

 Area 1: Click on the desired LED (“LED 1 to LED 8”) to be adjusted. To sync
all the LEDs with “LED 1” click “Sync to LED 1.”
 Area 2: Adjust colors as follows:
① Click on the desired color on the color ring (or drag the white knob
onto the desired color).
② Input the RGB values directly (or drag the white knobs corresponding
to R, G, B, S). S is color saturation.
③ Input HEX value directly
 Area 3: Five preset colors
Area 4: LED On/Off switch
Area 5: Brightness adjustment
Area 6: Light effect speed adjustment. To speed up adjust the knob to the
left and vice versa to slow down.
After achieving the desired settings, click “Apply” to save.
www.xpg.com

4. Lighting Effect ─ Strobing

 Area 1: Click on the desired LED (“LED 1 to LED 8”) to be adjusted. To sync
all the LEDs with “LED 1” click “Sync to LED 1.”

 Area 2: Adjust colors as follows:

① Click on the desired color on the color ring (or drag the white knob
onto the desired color).

② Input the RGB values directly (or drag the white knobs corresponding
to R, G, B, S). S is color saturation.

③ Input HEX value directly

 Area 3: Five preset colors


Area 4: LED On/Off switch
Area 5: Brightness adjustment
Area 6: Light effect speed adjustment. To speed up adjust the knob to the
left and vice versa to slow down.

After achieving the desired settings, click “Apply” to save.


5. Lighting Effect ─ Cycle
www.xpg.com

 Area 1: LED On/Off switch


Area 2: Light effect speed adjustment: To speed up adjust the knob to the
left, and vice versa to slow down.
Click “Apply” to save setting.
6. Lighting Effect ─ Rainbow

 Area 1: LED On/Off switch


Area 2: Light effect speed adjustment: To speed up adjust the knob to the
left, and vice versa to slow down.
Area 3: Direction adjustment: “Default” is clockwise and “Reverse” is
counterclockwise.
Click “Apply” to save settings.
7. Lighting Effect ─ Breathing Rainbow
www.xpg.com

 Area 1: LED On/Off switch


Area 2: Light effect speed adjustment: To speed up adjust the knob to the
left and vice versa to slow down.
Click “Apply” to save setting.
8. Lighting Effect ─ Comet

 Click on the desired color on the color ring (or drag the white knob onto
the desired color).
 Input the RGB values directly (or drag the white knobs corresponding to R,
G, B, S). S is color saturation.
 Input HEX value directly
 Area 2: Five preset colors
Area 3: LED On/Off switch
Area 4: Brightness adjustment
www.xpg.com

Area 5: Light effect speed adjustment: To speed up adjust the knob to the
left and vice versa to slow down.
Area 6: Direction adjustment: “Default” is clockwise and “Reverse” is
counterclockwise.
Click “Apply” to save settings.
9. Lighting Effect ─ Comet Rainbow

 Area 1: LED On/Off switch


Area 2: Light effect speed adjustment: To speed up adjust the knob to the
left and vice versa to slow down.
Click “Apply” to save setting.
10. Lighting Effect ─ Flash

 Area 1: Adjust color as follows:


www.xpg.com

① Click on the desired color on the color ring (or drag the white knob
onto the desired color).
② Input the RGB values directly (or drag the white knobs corresponding
to R, G, B, S). S is color saturation.
③ Input HEX value directly
 Area 2: Five preset colors
Area 3: LED On/Off switch
Area 4: Brightness adjustment
Area 5: Light effect speed adjustment: To speed up adjust the knob to the
left and vice versa to slow down.
Area 6: Direction adjustment: “Default” is clockwise and “Reverse” is
counterclockwise.
Click “Apply” to save settings.
11. Lighting Effect ─ Flash Rainbow

 Area 1: LED On/Off switch


Area 2: Light effect speed adjustment: To speed up adjust the knob to the
left and vice versa to slow down.
Area 3: Direction adjustment: “Default” is clockwise and “Reverse” is
counterclockwise.
Click “Apply” to save settings.
12. Lighting Effect ─ Wave
www.xpg.com

 Area 1: LED On/Off switch


Area 2: Light effect speed adjustment: To speed up adjust the knob to the
left and vice versa to slow down.
Click “Apply” to save setting.

13. Lighting Effect ─ Glowing Yoyo

 Area 1: LED On/Off switch


Area 2: Light effect speed adjustment: To speed up, adjust the knob to the
left and vice versa to slow down.
Click “Apply” to save setting.
14. Lighting Effect ─ Starry Night
www.xpg.com

 Area 1: LED On/Off switch


Area 2: Light effect speed adjustment: To speed up adjust the knob to the
left and vice versa to slow down.
Click “Apply” to save setting.

15. Lighting Effect Default

 Area 1: LED On/Off switch


Click “Apply” to save setting.

You might also like