0% found this document useful (0 votes)
107 views6 pages

Modberry 500 - Industrial Computer: S P Berry

The ModBerry 500 is an industrial computer based on the Raspberry Pi Linux system. It has configurable hardware options including I/O interfaces, memory, and expandable features like LTE/3G/GPRS connectivity. The ModBerry 500 is designed for automation, monitoring, and remote supervision applications, and can function as a PLC, data logger, protocol converter, and more. It has standard communication interfaces and is compatible with Raspberry Pi software.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
107 views6 pages

Modberry 500 - Industrial Computer: S P Berry

The ModBerry 500 is an industrial computer based on the Raspberry Pi Linux system. It has configurable hardware options including I/O interfaces, memory, and expandable features like LTE/3G/GPRS connectivity. The ModBerry 500 is designed for automation, monitoring, and remote supervision applications, and can function as a PLC, data logger, protocol converter, and more. It has standard communication interfaces and is compatible with Raspberry Pi software.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

ered b

ow

y
Pi
Ra
sp
ModBerry 500 - Industrial Computer b e rr y

ModBerry 500 is a series of industrial computers which you


can easily adapt to your needs by choosing from the
available options.

Raspberry Pi compute module

ModBerry 500
512 MB RAM and 4GB NAND FLASH memory
500
USER

ModBerry
STATUS

Rich set of I/O interfaces: including digital and analog


inputs/outputs, RS-232/RS-485 serial ports

Economic 1-Wire bus, typically used for reading


temperature and humidity sensors HDMI
RESET

Expandable hardware resources: LTE/3G/GPRS, WiFi, ZigBee

Basic information

Designed for the needs of automation, telecommunications, remote supervision, and monitoring

Fully configurable platform - you can setup hardware options of your device

Full range of communications interfaces, including LTE/3G/GPRS modem

Standard protocol support (e.g. MODBUS, SNMP), possibility to install dedicated user protocols

Web page visualization of current/archived data and remote control directly from the device or cloud service

Available Hardware Options Software Properties


Serial ports: 2x RS-232/485 New firmware based on Raspberry Pi Linux guarantees
stability and security of operation
Digital I/O: Compatible with Raspberry Pi software
4x Digital Input, 4x Digital Output
Expansion modules to increase the amount of available
Configurable Digital I/O: interfaces (see accessories section)
4x Digital Input/Output
Ready tools and pre-compiled packs, C/C++, JAVA, SQL,
PHP, SSH and VPN support
Analog inputs:
4x Analog Input Developer tools and support, instructions,
informational materials
Communication interfaces: Ethernet, 1-Wire, CAN, USB
Remote software updates
Audio/Video: HDMI, Audio Output Updates for the innovative iMod platform

Expanshion cards: iModCloud – dedicated cloud computing service for


Wi-Fi, ZigBee, LTE/3G/GPRS, Bluetooth, GPS telemetry, remote control and data sharing
Full technical support through a dedicated portal,
Other: Extended temperature range project cooperation via TECHBASE Solution Partner

ModBerry 500 - Industrial Embedded Computer based on the Raspberry Pi Linux system 1/6
www.techbase.eu e-mail: [email protected] tel. +48 58 302 39 90 ver: 1407021042
Applications

Typical method of use (3 functions: C-L-V)


Protocol and interface conversion (Convert) - data is collected from input interfaces, converted and transmitted to output
interfaces, e.g. 3G/GPRS, external modules

Data logger (Log) - archiving and sharing data in a file format, database or with the use of external systems (SCADA or dedicated iModCloud)

ModBerry 500
Access via WWW (Visualize) - data is presented directly from the device or with dedicated cloud computing services (iModCloud)

Access via
External devices
web browser

I/O
ModBerry 500
Input/Output Data server
data e.g. SCADA

You can configure the device, so it performs Adapted to Industrial Conditions:


the following functions:
Low energy consumption
PLC
RTC Battery-powered Real Time Clock (RTC)
Telemetry module with data logger
Serial port server WatchDog function ensures hardware operation control
of selected services
Protocol and interface converter
Programmable controller Effective file systems used for FLASH memory,
ensuring long, failure-free operation
LTE/3G/GPRS/EDGE modem
MODBUS Gateway/Router Compact, durable housing made from ABS plastic
or aluminum, adapted to installation on a DIN bus
SNMP Agent
Web server with PHP and SQL database support Easy installation due to the use of disconnectable screw terminals
SMS Gateway No moving elements (fans, platter disks)
LTE/3G/GPRS router, NAT
Versions with extended operating temperature range: -25 ~ 80°C
E-mail server, FTP, SSH, VPN

Built-in LTE/3G/GPRS/EDGE*
Modem for data LTE/3G/GPRS data transmission and SMS support. iMod has unique hardware-software features providing connection efficiency and economy:

The device i equipped with Watchdog mechanism to ensure modem stability.

Pre-installed software for constant verification of LTE/3G/GPRS connection and GPRS reconnect function.

Multiplexing server provides 3 independent modem communication channels. Allows sending and receiving of SMS during LTE/3G/GPRS transmission.

You can use telemetry SIM cards with dynamic IP addresses due to the use of DynDNS. VPN or iModCloud technology allows use of cards with
non-public IP.

* depending on product version

ModBerry 500 - Industrial Embedded Computer based on the Raspberry Pi Linux system 2/6
www.techbase.eu e-mail: [email protected] tel. +48 58 302 39 90 ver: 1407021042
Configuration Scheme

ModBerry 500

ModBerry 500
Broadcom 700MHz
BASE

RAM 512MB, NAND FLASH 4GB


4x DO 1x 1-Wire USB
4x DI Ethernet RTC
PRECONFIGURED VERSION*

Mini Standard Max

1x RS-232/485 2x RS-232/485 2x RS-232/485


4x DIO 4x DIO
1x PCI-Express 4x ADC
2x PCI-Express
HDMI
Audio

* other configuration sets available for order


EXPANSION CARDS

Wi-Fi ZigBee LTE / 3G / GPRS Bluetooth GPS


OPTION

Extended operating temperature range

-25 ~ 80°C

ModBerry 500 - Industrial Embedded Computer based on the Raspberry Pi Linux system 3/6
www.techbase.eu e-mail: [email protected] tel. +48 58 302 39 90 ver: 1407021042
Dedicated ready-to-use device software

iMod - an innovative software platform allowing for fast start-up and full exploitation of device
COMING SOON

capabilities without the need for writing programs. A fully configurable system reflecting typical C-L-V
use (see clarification above). In order to learn more about the iMod platform, visit the page:

ModBerry 500
www.techbase.eu/imod

iModCloud is a Software as a Service (SasS) that


fully controls iMod devices. Together stand as a
complete solution ecosystem – iModCloud Ecosystem.
COMING SOON

In other words – it is a combination of a cloud service


with a web user interface and special industrial
devices that are fully manageable remotely.

READY-TO-USE
iModCloud is ready-to-use set of components that can be adjusted to any remote
monitoring and control system
COMING SOON

REMOTE CONTROL
User interface of the system is accessible from any place of the world through web
browsers of desktops and mobile devices

PLC - software for creation of algorithms in the ladder system with the capability of operation on NPE,
services the MODBUS protocol

Expanded developer's platform, additional software packs:

GPRS - facilitating management of the 3G/GPRS connection and containing the functionality
of monitoring connection status and DynDNS service
SMS - allows sending and receiving text messages
APACHE - HTTP server pack, enabling device access from web browser
PYTHON/RUBY/JAVA/PHP - packs allowing creating, develomepent and start-up of applications
in many programming languages
PostgreSQL, MSSQL, SQLite - tools for database management
Open VPN - enables creating a connection, allowing communication between devices located
in different networks, providing very high level of security
NXDynamics - a platform for fast and easy (drag and drop system) creation of WWW visualiza-
tions and a web panel for NPE management through an internet browser
SSH - enables remote connection with device while maintainging high level of security
GPS - allows the location of the device, traffic monitoring for the unit and time synchronization

ModBerry R500 - Industrial Embedded Computer based on the Raspberry Pi Linux system 4/6
www.techbase.eu e-mail: [email protected] tel. +48 58 302 39 90 ver: 1407021042
Accessories
POWER FEEDERS
SDK-0302-12VDC-R
AC/DC power feeder, input 100-240V AC, output 12V DC 1000mA, cable endings in tube terminals
DN-20-24
DIN bus power feeder, output 24V DC 24W, input 88..264 V AC or 124..370 V DC

ModBerry 500
ANTENNAS
ANT-GSM-1M
GSM antenna with frequency 824-960MHz/1710-1910MHZ/1920-2170MHz
ADA-0086-L
Screw-in angular antenna, SMA, 900/1800 MHz
1-WIRE SENSORS
1Wire-Therm-Stainless
Digital temperature sensor in steel housing
1Wire-Therm-ABS
Digital temperature sensor closed in ABS plastic housing
M-BUS CONVERTERS
mBus 10
The mBus 10 is a transparent converter from RS-232 to M-Bus interface.

mBus 400
The mBus 400 is a transparent converter from RS-232 to M-Bus interface. You can connect 4 RS-232 signal
lines - RxD, TxD, CTS, RTS.

ZIGBEE SENSORS/MODULES
ZS-10, ZS-20
Multi-channel ZigBee Sensor with Battery Power Supply
ZM-10, ZM-20
ZigBee Relay I/O Module

Pinout

500
DI DIO DO 1-WIRE
DATA
GND

3.3V

GND

1 2 3 4 5 6 7 8 9 10 11 12
COM1 COM2 RS485_1 RS485_2 CAN ADC RESET
BUTTON
HDMI
B (+)
B (+)

HIGH

GND
A (-)

LOW
RxD

RxD
TxD

GND

TxD

A (-)

1 2 3 4
TERMINAL 1

500

POWER USER
LAN1
V- V+ USB (eth0)
SIM CARD AUDIO OUT BUTTON

ModBerry 500 - Industrial Embedded Computer based on the Raspberry Pi Linux system 5/6
www.techbase.eu e-mail: [email protected] tel. +48 58 302 39 90 ver: 1407021042
Technical specification
Processor module Raspberry Pi Compute Module SO-DIMM
CPU Broadcom 700MHz
RAM 512MB
Flash Memory 4096MB (shared with RAM)

ModBerry 500
Operating system Linux Kernel 3.6, supported by Raspberry Pi
Real Time Clock RTC, 240 byte SRAM, Wath Dog Timer
ETHERNET INTERFACE
1x Ethernet 10/100 Mbps (RJ45 connector)
SERIAL PORTS
RS-232 / RS-485 Ports 2x RS-232 (3 pins) / 2x RS-485 (2 pins)
USB PORTS
1x external USB 2.0 (host), 1x internal USB 2.0

INPUTS / OUTPUTS
Digital inputs (DI) 4x DI (0..5V DC)
Digital outputs (DO) 4x DO (0..30V), max. power efficiency: 500 mA
Configurable I/Os 4x DI/DO, max. power efficiency: 500 mA
Analog inputs 4x AI - range 0..10V DC (18bit resolution)
1-Wire 1x 1-Wire
CAN 1x CAN
POWER SUPPLY
9 ~ 24 V DC, 1000 mA
MECHANICAL PARAMETERS
Dimensions 91 x 106 x 61 mm
Weight 300g
Casing ABS or Aluminum, DIN bus instalation

OPERATING AND STORAGE CONDITIONS


0 ~ 70°C, humidity: 5 ~ 95% RH (no condensation)
Extended operating temperature: -25 ~ 80°C, humidity 5 ~ 95% RH (no condensation)*
AVAILABLE EXPANSION CARDS
Wi-Fi (IEEE 802.11 b/g/n, speed up to 150 Mbps, 64/128-bit WEP, WPA, and WPA2)
LTE/3G/GPRS modem, GPS module
Bluetooth, ZigBee
CONNECTORS AND PHYSICAL INTERFACES
1x RJ45 (Ethernet)
1x HDMI
2x monostable switch button
1x32 pin screw terminal
1x USB 2.0 type A
1x 2 pin power
1x SIM CARD slot
PRODUCER
TECHBASE Group Sp. z o.o., Pana Tadeusza 14, 80-123 Gdańsk, Poland

*some of the expansion cards can limit operating temperature range

ModBerry 500 - Industrial Embedded Computer based on the Raspberry Pi Linux system 6/6
www.techbase.eu e-mail: [email protected] tel. +48 58 302 39 90 ver: 1407021042

You might also like