Red File FGRS Universal
Red File FGRS Universal
FGRS Universal.
FGRS Universal.
Positioning.
Place the pipe clamp Insert the pipe into Close the rapid- After the final
at the right position the pipe clamp locking-mechanism of positioning of the
and height by the pipe clamp, to be pipe, tighten the
screwingto the able to adjust the screw.
threaded rod or stud pipe to the right Tightening torque Tinst
screw position
M5: max. 2 Nm
M6: max. 3 Nm
Patent of the New clamp Safe rapid- Highest load Product USP
“Plus-locking“ is band geometry locking values by unique
expired for higher load mechanism independently product
Clamp band levels due to all-round confirmed by features
geometry etc. and crimped RAL quality Basis for more
Rubber inlay edges marks
belongs to the with tight fit and future
supplier without gluing Innovations
standard!
Load table for pipe clamps is integrated to the technical data table, s. 4. Product range & prices
An ETA approval for the FGRS Universal hinged clamp is not planned up to now. This due to the
fact, that a hinged clamp won´t generate acceptable fire rated loads, which is the main goal of
the ETA!
Sample card FGRS Universal Brochure for the FGRS Catalogue pages for the FGRS
and FRS-L Universal Universal and FRS-L Universal Universal up to 2”
Was sent out at the 1st July 2021 Showing the features and Standard design including
to support the substitution benefits properties and technical data
process of the “Plus-clamps” Includes the substitution list for Extension up to 4” will be ready
Not available anymore the “Plus-clamps” in April 2022