Scribd
Upload
59 views2 pages

WC4265 Firmware Installation Instructions

The document provides instructions for updating printer software. It explains that updating allows incorporating new fixes and improvements released by the manufacturer. It outlines three steps for determining the current version, enabling upgrades, and then updating the software either using a USB flash drive or through the printer's administration page. The process will delete current print jobs and restart the printer.

Uploaded by

NIVARDO ÑAUPA MOROCCO
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
59 views2 pages

WC4265 Firmware Installation Instructions

The document provides instructions for updating printer software. It explains that updating allows incorporating new fixes and improvements released by the manufacturer. It outlines three steps for determining the current version, enabling upgrades, and then updating the software either using a USB flash drive or through the printer's administration page. The process will delete current print jobs and restart the printer.

Uploaded by

NIVARDO ÑAUPA MOROCCO
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Updating the Printer Software

Overview

The Software Upgrade feature allows the customer to upgrade the machine software as requested by a Xerox
Customer Support Center Representative, without needing a Customer Service Representative to be present.

When should I upgrade the software?


You can update your printer when Xerox releases a new version of printer software or firmware, you can update your
printer to Incorporate the new fixes and improvements .

How do I upgrade the software?


NOTE: Upgrading software will delete any current jobs in the machine print queue and prevent further jobs from
printing until the upgrade has completed. If you wish to preserve these jobs, allow them to complete before upgrading
your software. All configured network settings and installed options will be retained by the machine after the Software
Upgrade process.

Updating the Software

Before you begin:

• Determine the current software version of your printer. See the Related Content for additional information.
• Download the latest software update file in .dlm format from the Drivers and Downloads page for your
specific device.

To determine the currently installed software version:


• In CentreWare IS, click Properties > General Setup > Configuration.
• Scroll down to Software to verify the software version.

To Enable Upgrades

1. Access CentreWare Internet Services (CWIS). See the Related Content for additional information.
2. Click Properties > Maintenance.
3. Click Upgrade Management.
4. For Software Upgrade, next to Upgrades and Cloning, select Enabled.

To Update the Software Using a USB Flash Drive

1. Copy the software .dlm file to your USB Flash drive.


2. Insert your USB Flash drive in a USB port on the printer.
3. Select Print from USB.
4. Select the file, then select OK.
5. When the process is complete, the printer restarts automatically. To verify that the software has updated,
check the Configuration Report.

To Install Software Upgrades in CentreWare Internet Services

1. Access CentreWare Internet Services (CWIS). See the Related Content for additional information.
2. Click Properties > Maintenance.
3. Click Firmware Upgrade.
4. To locate and select the firmware upgrade file in .dlm format, click Browse or Choose File.
5. Click Open.
6. Click Install Software.
7. To verify that the software has updated, check the Configuration Report.

NOTE: Software installation begins several minutes after you submit the software to the printer. CentreWare
Internet Services is unavailable while the software is installing.

You might also like