Enraf Tank Farm Gateway CIU 888

The next generation CIU for reliable,

accurate gauge and inventory data.
Honeywell’s Enraf Tank Farm Gateway CIU 888
is the critical link between tank gauging
equipment and control room systems. It provides the operator with reliable,
accurate, real-time tank inventory data 24 hours a day, 7 days a week.

Replacing the legacy 858 and 880 series, the CIU 888 serves as the data
acquisition unit for tank measurement equipment, continuously scanning
gauge data. It is used to calculate accurate tank inventory data according
to international standardized calculation methods, such as the API,
ASTM, GPA and many others.

Global Experience. Locally Applied.

All measured and calculated data is directly available for use by host
applications such as the inventory management system, the DCS or
management information system via multiple dedicated serial host links
and network interfaces. Support of multiple protocols guarantees simple
and reliable connectivity of installed field equipment to the control room.
The modular design provides a flexible upgrade path for the future.

Enhanced Connectivity
The CIU 888 (pronounce as “triple eight”) front provide technicians easy access to availability to all users. Hot-Standby relay
series is the first fully Ethernet enabled CIU configure the unit locally and to communicate contacts provide real-time notification of CIU
available in the market. While previous with the field equipment. Also here the layered status and simplify handling by DCS-systems
generations of tank interface units have been security model (LCSM), with user and access reducing downtime. Upcoming redundant
based mostly on serial interfaces, the CIU profiles, helps to promote safety and security. Ethernet ports will complete the redundancy
888 offers connectivity via multiple Ethernet The CIU 888 robustness is based on strict concept, simplifies implementation further
ports. Internal firewalls enable safe and industrial design rules. All boards are reducing costs and ensure uninterrupted
secure connections with multiple systems tropcalized (acc. ISA 71.04), and the CAE availability of data.
simultaneously, control systems and Office thermal design using heat-pipes instead of An easy-to-read colour display at the front
LAN cannot interfere due to strict segregation. conventional fans results in a full ruggedized, provides diagnostic information, easy to
VPN connectivity allows remote connection, all-solid-state, non-moving parts solution, interpreted, supporting faster service. The
while the layered cyber security model built to last. Unique autonomous redundancy graphic diagnostic dashboard combined with
(LCSM) helps to comply with strict IT security features will ensure uninterrupted data a ring of light (a color-coded LED ring
rules, helping your plant to be safe and surrounding the key pad) provides an
secure. A dedicated service LAN port on the at-a-glance and unambiguous indicator of
Distributed Control and system health and availability.
Supervision (DCS)

CIU 888 in typical plant architecture

Supervisory Control and

Data Acquisition (SCADA)

Communication Interface Unit

(CIU 888)

Servo Tank
Gauging

SmartRadar Tank
Gauging

HIMS Hybrid
Programmable Logic
Controllers (PLC’s)

SmartRadar
Level Gauging Intelligent Management
System (Entis Pro)
 Front view (with closed door)
• LCD color display for status and diagnostics
• Convenient lid automatically covers access to
Service- and USB-port and keys for Configuration
lock and W&M sealing
• Navigation keys and ring of light showing CIU status

Rear view (left to right)

• Two status relay contacts (Hot-Standby)
• VGA & Audio future use
• Two serial host ports: Compatible with Entis Pro
• Two USB ports: Auto-disabled; Future use
• 5 dedicated Ethernet ports, segregated by Firewall
• 6 flexible field and Host communication ports

Technical Specifications—Functional (Software)

General
Description Field scanning and communication interface for tank inventory applications with optional
embedded tank inventory calculation functionality.
Application For all applications requiring accurate and reliable process and inventory data, such as
refineries, tank farms and terminals. Data is suitable for custody transfer, safe product
transfer and tank farm operation.
Intended Use Control room equipment
Legal Metrology and Custody Transfer Compliant to API-standards as stated by approval and certification by notified bodies as NMI.
Functional Specification
Tank Database 50 tanks (Entis Pro compatibility) and 80 tanks when CIU is connected to a Modbus host
(not supported when Entis Pro is also scanning CIU 888)
Redundancy Hot standby, real-time synchronization (redundancy controlled by Entis Pro or modbus host)
Supported Gauge Models All GPU enabled tank gauges (such as 811, 813, 866, 854, 872, 873, 877, 894 and 990)
Gauge Commands • Lock test • Unlock • Block
• Freeze • Calibrate (854, 894) • Density dip
• Alarm test (SmartRadar) • Water dip
Tank Scanning 6 field ports sequential and/or parallel, refresh rate 2-4 sec.1
Inventory Calculations Conform API MPMS Ch. 12.1
Tank Capacity Tables (strapping tables) Up to 5000 straps per tank, 400000 straps total
Support API/ASTM Product Calculations • ASTM D1250-80; conform Vol. X—Tables, 5, 6, 23, 24, 53, 54, 59, 60 and 59, 60 Alt-T,
Product groups A, B, C & D
•A PI MPMS Ch. 11.1 (2007; adj. to ASTM D1250-04 and IP-200)—Tables, 5, 6, 23, 24,
53, 54, 59, 60 and 59, 60 Alternative Temperature; Product groups A, B, C, D
•A PI MPMS Ch. 11.2.4 (GPA TP-27)—Tables, 5, 6, 23, 24, 53, 54, 59, 60 and 59, 60
Alternative Temperature; Product group E
•A STM D4311-83—Table 1 and 2
•A STM D4311-96—Table 1
•A STM D4311-04—Table 1 and 2
Available Gauge Data2 • Product level • Gauge status and alarms
• Product temperature • Vapor temperature
• Vapor pressure • Ambient temperature
• Water level • Observed density (Servo, HTG, HIMS)
Available (Calculated) Inventory Data • Volume (TOV, GOV, GSV, NSV) • Mass (Liquid, vapor, total)
• Reference density • Volume correction factor (VCF, CTL)
• S&W, Vapor (4 types), DCF, TCF, manual CTL • Volume derived flow
Clock & Time Synchronization Internal or external using Entis Pro or Modbus host systems such as DCS

(cont. next page)

 Functional Specification (cont.)
Supported Engineering Units Level m, mm, ft, in, in/16 and ft-in-16 (fis)
Temperature °C, °F
Density kg/m3, °API, lb/ft3, RD60/60, lb/USgal
Pressure kgf/cm2, kPa, psi(g), Pa
Volume m3, USgal, bbl, l(L)
Mass/Weight kg, lb, metric ton, long ton, US ton
Flow m3/min, m3/h, l/min, bbl/min, bbl/h, USgal/min, USgal/h, UKgal/h
Available Tank Correction Methods • CTSh3
• Floating Roof Weight
Host Connectivity
Serial Ports 2x modbus serial (+ 4 additional ports by using optional slots)
Supported Host Protocols • Serial modbus (Slave)
• CIU 858 emulation
• CIU 880 Prime/Plus emulation (serial modbus)
Ethernet/LAN Future use
Field Connectivity
Field Ports 6x option slots (of which 4 ports can be used for serial host connectivity)
Wireless Connectivity ISA 100 via Honeywell WDM through TCP/IP to serial converters
Available Option Boards Enraf BPM fieldbus, Serial modbus (master) and Serial GPU input
Compliance & Certifications
Electrical Safety • IEC 61010-1:2010 (3rd edition)
• EN 61010-1:2010
European Directives CE:
• 2006/95/EC (Low voltage directive)
• 2004/108/EC (EMC)
• CAN/CSA-C22.2 No. 61010-1-12
• UL Std. No. 61010-1 (3rd Edition)
Self Monitoring & Diagnostics Designed for compliance with NAMUR NE 107
Legal Metrology (Weight & Measures) • NMI – Netherlands
• PTB – Germany (pending)
Footnote:
1
Depending on number of used field ports, scan strategy, and baud rate. 2 Depending on gauge functionality. 3 Ambient temperature input required.

CIU 888 Option Board Specifications

Enraf BPM Field Bus Card (Pos 8 to 13 = B)
Physical Layer 2-wire Bi-phase mark modulated (MIL-STD-1553)
Supported Protocol(s) Enraf BPM
Typical No. Field Devices 10-15, depending on cable spec and length
Baud Rate 1200/2400/4800 Baud
Distance 10 km or more depending on cable characteristics
Cable Characteristics 1 uF/200 Ohm max.
Type of Galvanic Isolation Transformer coupled with ground shield
Galvanic Isolation 1500 V
Enraf Serial Communication Card (GPU Master (Input), Modbus Master (Input) and Modbus Slave (Host))
Physical layer 2-4 wire RS-485 or RS-232C
Protocol(s) • GPU Master (Field communication)
• Modbus Master (Field communication)
• Modbus Slave (Host communication)
Baud Rate 1200 up to 38400 Baud
Type of Galvanic Isolation Opto isolation
Galvanic Isolation 1500 V
Number of Modbus Slave Devices • 32 modbus field devices (RS 485) multi-dropped.
(for modbus master field communications) • 1 modbus field device (RS232)
• 50 devices can be configured (If connected through a converter/concentrator)

(cont. next page)

Technical Specifications—Hardware
Electrical
Power Supply 100-240 Vac, auto ranging (-15% to +10%), 45-65 Hz
Power Rating Max. 60 VA (35 VA nominal)
Nominal Start-Up Current 60 mA (Fuse: 2A Slow Blow); Start up current is (inrush): 60mA @230V
Over Voltage Category II
Cooling System 2 heat sinks with heat pipe design (no moving parts)
Battery Type 3V, 225mAh (for back-up system clock only—10 yrs. estimated life time)
Operating System
O/S Linux Arch
Memory 4 GB Flash memory (upgradable)
User Interface and I/O
Front Panel Display Backlight LCD color display (50 x 38 mm; 320 x 240 pixels) for status and diagnostics
User Input 6 switches (f, g, h, i, OK and Esc) with LED (ring of light) status indication
Key Lock Switches 2x (for configuration, resp. W&M sealing)
Relay Output 2x DPDT for CIU status (Hot Standby); contact rating: 30Vdc,1A
Video Output SVGA (future use)
Audio Output Line out (future use)
Serial Ports 2x non-isolated RS-232C
Ethernet Ports 5x 10/100 Mb on back side (future use)
Service Ethernet Port 1x behind front panel—DHCP enabled, auto sensing, 10/100 Mb
USB Ports 1x behind front panel; 2x on back side—default disabled
Environmental
Ambient Temperature 0 °C to + 60 °C (32 °F to 140 °F)
Storage Temperature -20 °C to 85 °C (-4 °F to 185 °F)
Enclosure Classification Against mechanical impact IP 30 (NEMA 1)
Humidity 0 to 90% non-condensing
EMC Class CLASS A
Mechanical
Materials • Enclosure: Acryl painted steel
• Heat sinks (left and right side): Black anodized aluminum
• Front panel: ABS/PPE
Dimensions (WxHxD) 400 x 93 x 283 mm (15¾ x 3¾ x 11¼ in.)
Weight ~ 7.5 kg (16.5 lb) (excluding option cards)
Installation Wall mounting, 19” rack or table top (see Accessoiries)
Max. Load on Top (Table Top Use) 10 kg (22.0 lb)

Available Accessories
Electrical
19” Installation Brackets (2x) Part. Nr. A0888904
Wall Mounting Bracket Part. Nr. A0888903
Set Ethernet Patch Cables (Cat5e) (6x) Part. Nr. A0888911
Serial Null Modem Cable (9p) Part. Nr. S2570244 (3m/12ft) or S2570245 (12m/40 ft)
Tag Plate (Bare) Part. Nr. A0888107
Identification Code — Hardware Configuration
Pos 1 Application
U For Inventory Control of Bulk Storage Tanks
X Compliant with National W&M Requirements (specify country)
Pos 2 Base Configuration Hardware
S CIU for Tank Inventory Management
Pos 3 Memory
A 4 GB Flash
Pos 4 Selection
H CIU 888 Hardware Configuration
Pos 5, 6, 7 Product designation
8 8 8 Communication Interface Unit
Pos 8 Field Card Slot 1
Z Not Used
M Serial Modbus Input (Master)
T TRL/2 Fieldbus (Contact Honeywell representative)
B Enraf Fieldbus (BPM)
G Serial GPU (input)
Pos 9 Field Card Slot 2
Z Not Used
M Serial Modbus Input (Master)
T TRL/2 Fieldbus (Contact Honeywell representative)
B Enraf Fieldbus (BPM)
G Serial GPU (Input))
Pos 10 Field and Host Communication Slot 3
Z Not Used
M Serial Modbus Input (Master)
T TRL/2 Fieldbus (Contact Honeywell representative)
H Host Serial Modbus (Slave)
B Enraf Fieldbus (BPM)
G Serial GPU (Input)
Pos 11 Field and Host Communication Slot 4
Z Not Used
M Serial Modbus Input (Master)
T TRL/2 Fieldbus (Contact Honeywell representative)
H Host Serial Modbus (Slave)
B Enraf Fieldbus (BPM)
G Serial GPU (Input)
Pos 12 Field and Host Communication Slot 5
Z Not Used
M Serial Modbus Input (Master)
T TRL/2 Fieldbus (Contact Honeywell representative)
H Host Serial Modbus (Slave)
C Host CIU Emulation
B Enraf Fieldbus (BPM)
G Serial GPU (Input)
Pos 13 Field and Host Communication Slot 6
Z Not Used
M Serial Modbus Input (Master)
T TRL/2 Fieldbus (Contact Honeywell representative)
H Host Serial Modbus (Slave)
B Enraf Fieldbus (BPM)
C Host CIU Emulation
G Serial GPU (Input)
Pos 14 Extended Memory
Z Not Installed
Pos 15 Tag Plate
Z Not Required
T Tag Plate Sticker Added
Pos 16 Not Used
Z Not Used

U S A H 8 8 8 B Z Z Z Z Z Z Z Z Typical Identification Code
S A H 8 8 8 Z Z Your Identification Code
Identification Code — Software Functionality
Pos 1 Application
U For Inventory Control of Bulk Storage Tanks
X Compliant with National W&M Requirements (specify country)
Pos 2 Base Configuration Software
S Single CIU System
R Redundancy Enabled Per Unit
Pos 3 Functionality
S Based on CIU 888 Tank Gauging Interface
Pos 4 CIU Type
F Tank Gauging Software Functionality
Pos 5, 6, 7 Product designation
8 8 8 Communication Interface Unit
Pos 8, 9 Interfacing and Calculations
S 1 Scanning Functionality
V 1 Scanning with Embedded Volume Calculation Module
Pos 10 Web Monitoring
S Configuration and Diagnostics
Pos 11 Host Communication OPC
Z Not Enabled
Pos 12 Host Communication Modbus TCP/IP
Z Not Enabled
Pos 13 Host Communication Fault Tolerant Ethernet
Z Not Enabled
Pos 14 Remote Diagnostics
Z Not Enabled
Pos 15 Field Communication Ethernet
Z Not Enabled
Pos 16 One Wireless Connectivity
Z Not Enabled
Pos 17, 18 Number of Tanks
0 5 Max. tanks 5
1 0 Max. tanks 10
2 0 Max. tanks 20
3 0 Max. tanks 30
4 0 Max. tanks 40
5 0 Max. tanks 50
6 0 Max. tanks 60
7 0 Max. tanks 70
8 0 Max. tanks 80
Pos 19 Language
Z English Only
Pos 19A Upgrade
N New CIU ordering
U Upgrade
(Serial number of CIU and License required)

U 5 S F 8 8 8 V 1 S Z Z Z Z Z Z 0 5 Z N Typical Identification Code
S F 8 8 8 S Z Z Z Z Z Z Z N Your Identification Code
Overall Dimensions

19" rack mounting details

Top view

Front view

Rear view
Wall mount bracket

For More Information

To learn more about Honeywell,
visit www.honeywellprocess.com or contact
your Honeywell account manager.

Americas
Honeywell Americas, Inc.
2000 Northfield Ct.
Roswell, GA 30076
USA
Phone: +1 770 475 1900
Email: [email protected]

Europe, Middle East and Africa

Honeywell
Delftechpark 39
2628 XJ Delft
The Netherlands
Phone: +31 (0)15 2701 100
Email: [email protected]

Asia Pacific
Honeywell Pte Ltd.
17 Changi Business Park Central 1
Singapore 486073
Phone: +65 6355 2828 BR-14-24-ENG Rev.1
Your Terminal Operations Partner
November 2016
Email: [email protected] © 2016 Honeywell International Inc.