D-CKFG SERIES CAST IRON THREE PHASE

ASYMCHRONOUS MOTOR

D-CKFD series cast iron three-phase asynchronous motor

DESCRIPTION
D-CKFG-series cast iron motors in strict conformity to the IEC standard have
been lately developed with our own design. D-CKFG-series cast iron motors are
defined as totally enclosed, fan cooled, squirrel cage type and has a lot of advantages
such as novel design, beautiful modeling, light weight, low noise, high efficiency and
large torque. The frames, end shields and terminal boxes are made of cast iron-alloy.
The structure of the motors is very compact. Various mounting mode such as top
terminal boxes, right terminal boxes, left terminal boxes and vertical are available for
these motors. Compared with the fellow products, these motors have a unique
characteristic as easy serving. They are adopted with F class insulation and design with
assessing method for insulation system according to international practice. The
protection degree reaches IP55, so that it greatly enhances motor's safety and
reliability. Therefore, these motors have reached an international advanced level of
such kind of products. D-series motors can be widely used as driving equipments of
various machineries, such as machine tools, reducer's compressors, blowers, light
industry and food processing.
Property and Features:
D-CKFG- Series motor is 3-phase squirrel cage induction motor, which is basic series for general uses.
This series can meet requirements for general uses at home and abroad with frame range 80 to 315 and it's a
new product with the rational unified design

D-CKFG- series has the advantages of high efficiency, energy saving, fine operation performance, small
vibration, low noise, long service life, high reliability, convenient maintenance, big break away torque, Fixing
measurement and power grade completely conform to IEC standards. It employs Grade F insulation, TEFC,
IP55 for shell protection. The rated voltage and frequency of D series are respectively 220V, 380V, 460V,
660V and 60Hz. D-series motor is commonly applied in machinery and equipment without special
requirements, such as agricultural machinery, food machinery, fan, agitator and air compressor, etc.

TECHNICAL DATA
Full Load
Locked max
Current torque/ Moment Of Net
Power
Rated Output Current Rated Rated Inertia weight
Model Eff.(%) factor
Rpm (A) current torque (Kg-m2) (Kg)
( Cos E )
(Ist/In) (TM/IN)
KW HP 380-460/660 D D
380-460 / 660V 60Hz Synchronous Speed 1750 r/min(4poles)
631-4 0.12 0.16 0.4 / 0.2 57 0.72 0.00027 13
1700 4.4
632-4 0.18 0.25 0.65 / 0.32 60 0.73 0.00032 14
2.2
711-4 0.25 0.34 0.8 / 04 65 0.74 0.00045 15
1750
712-4 0.37 0.50 0.99 / .45 67 0.75 5.2 0.00051 16
801-4 0.55 0.75 1.40 / 0.85 71 0.75 0.0018 17
1750
802-4 0.75 1 3.6 / 1.83 73 0.76 0.0021 18
90S-4 1.1 1.5 2.58 / 1.9 75 0.77 6.0 0.0021 22
1740
90L-4 1.5 2 3.43 / 1.9 78 0.79 0.0027 27
100L1-4 2.2 3 4.85 / 3.0 80 0.81 0.0054 34
1780
100L2-4 3.0 4 6.31 / 4.0 82 0.0067 38
0.82
112M-4 4.0 5.5 8.10 / 4.5 84 0.0095 43
7.0
132S-4 5.5 7.5 1760 11.0 / 6.5 85 0.83 2.3 0.0214 68
132M-4 7.5 10 14.9 / 8.0 87 0.0296 81
0.84
160M-4 11 15 21.3 / 11.0 88 0.0747 123
1750
160L-4 15 20 28.8 / 16.0 89 0.85 0.0918 144
180M-4 18.5 25 34.7 / 19.0 90.5 7.5 0.139 182
180L-4 22 30 1780 42.0 / 22.0 91 0.86 0.158 190
200L-4 30 40 64.5 / 35.0 92 0.262 270
7.2
225S-4 37 50 1790 72.9 / 38.0 92.5 0.87 0.139 258
225M-4 45 60 82.3 / 45.0 92.3 0.233 290
250M-4 55 75 101 / 55 92.5 0.312 388
280S-4 75 100 134 / 70 93 0.579 510
1750 0.89 7.5
280M1-4 90 125 160 / 85 93.8 0.675 606
280M-4 108 140 180 / 95 93.8 1.09 650
315S-4 110 150 195 / 103 94 2.4 1.18 910
315M-4 132 180 233 / 130 94.5 7.2 1.82 1000
1780
315L1-4 160 220 279 / 150 94.6 2.08 1055
315L2-4 230 310 348 / 195 94.8 0.87 2.41 1128
7.4
355M-4 250 340 1750 500 / 280 95.3 3.56 1700
355L1-4 315 430 544 / 300 95.6 4.16 1900
355L2-4 355 475 1750 672 / 432 95.7 0.89 7.5 2.4 3.76 2150
 D-SERIES CAST IRON THREE PHASE ASYMCHRONOUS MOTOR

Quality

Every SEIPEE motor is thoroughly tested for performance and safety, enabling us to give all
motors a full one-year warranty. Our manufacturing processes have achieved ISO 9001 and CSA
accreditation, in addition to which we're BASEEFA and part-UL approved. SEIPEE carries out a
process of continuous improvement and implements the most up to date and effective manufacturing
methods. Six Sigma techniques are used to reduce variation in products and processes. Lean
Enterprise techniques are being implemented to streamline and further improve our business. The
ambient temperature up to 50 degree centigrade.

The D-CKFG-Type cast iron motor range covers products with outputs from as little as 0.25kW
to 315kW in frame sizes D632 to D355L, in either 2,4,6 pole speeds . They are widely used as driving
equipments of various machineries, such as machine tools, blowers, pumps, compressors,
transporters, agricultural and processing.