Scribd
Upload
404 views1 page

Interface - Brad Harrison Plug - 3-Pin For Single Solenoid - 5-Pin For Double Solenoid

This document provides information about accessories for D41VW series directional control valves, including various micro connector and plug options for electrical connections. It describes the pin assignments and wiring configurations for 3-pin and 5-pin Manaplug mini connectors, DESINA M12 connectors, and Hirschmann plugs. It also mentions LED signal light and conduit box options.

Uploaded by

s b
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
404 views1 page

Interface - Brad Harrison Plug - 3-Pin For Single Solenoid - 5-Pin For Double Solenoid

This document provides information about accessories for D41VW series directional control valves, including various micro connector and plug options for electrical connections. It describes the pin assignments and wiring configurations for 3-pin and 5-pin Manaplug mini connectors, DESINA M12 connectors, and Hirschmann plugs. It also mentions LED signal light and conduit box options.

Uploaded by

s b
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Catalog HY14-2500/US Directional Control Valves

Accessories Series D41VW

Manaplug (Options 6, 56, 1A & 1C) Micro Connector Options (7A, 7B, 1B & 1D)
Interface – Brad Harrison Plug
– 3-Pin for Single Solenoid
– 5-Pin for Double Solenoid
A
Ground
Wire #1 (Green)

Solenoid (Negative)
Solenoid (Positive)
Wire #3 (Red/Black)
Wire #2 (Red/White)
3-Pin Manaplug (Mini) with Lights
Single Solenoid Valves – Installed Opposite Side of Solenoid

Pins are as seen on valve (male pin connectors)

Manaplug – Electrical Mini Plug Manaplug – Electrical Micro Plug


EP336-30 3 Pin Plug EP337-30 3 Pin Plug
EP316-30 5 Pin Plug (Double Solenoid) EP317-30 5 Pin Plug (Double Solenoid)
EP31A-30 5 Pin Plug (Single Solenoid) EP31B-30 5 Pin Plug (Single Solenoid)

Conduit Box Option C Signal Lights (Option 5) — Plug-in Only


– No Wiring Options Available – LED Interface
– Meets Nema 4/IP67

Hirschmann Plug with Lights (Option P5) DESINA Connector (Option D)


ISO 4400/DIN 43650 Form “A” M12 pin assignment
Standard
Pin #3 DESINA – design
(Ground)
Pin 1 and 2
connected
Pin #1 1 = Not used
4 1
(Negative)
Pin #2 2 = Not used
(Positive)
2
3 = 0V
3
4 = Signal (24 V)
1 3
5 = Earth Ground
4
5
2 5
Face View of Plug

Pins are as seen on valve (male pin connectors)


D41.indd, dd

A123 Parker Hannifin Corporation


Hydraulic Valve Division
Elyria, Ohio, USA

You might also like