2021-22 - MODULE 7 - GASES - LIQUIDS - SOLIDS

Batch 2_ 1st Sem ay 2021-2022
INCHEM – Inorganic Chemistry MODULE 7
MODULE 7
Gases, Liquids,
and Solids
SVLirazan_2021_22
Chapter 7
Table of Contents
7.1 The Kinetic Molecular Theory of Matter
7.2 Kinetic Molecular Theory and Physical States
7.3 Gas Law Variables
7.4 Boyle’s Law: A Pressure-Volume Relationship
7.5 Charles’s Law: A Temperature-Volume Relationship
7.6 The Combined Gas Law
7.7 The Ideal Gas Law
7.8 Dalton’s Law of Partial Pressures
7.9 Changes of State
7.10 Evaporation of Liquids
7.11 Vapor Pressure of Liquids
7.12 Boiling and Boiling Point
7.13 Intermolecular Forces in Liquids
Copyright © Cengage Learning. All rights reserved 2
Section 7.1
The Kinetic Molecular Theory of Matter
Common Physical Properties of Matter

• Volume and Shape
• Density
• Compressibility
• Thermal Expansion

Section 7.1
Compressibility
• A measure of the change in volume of a
sample of matter resulting from a pressure
change.

Section 7.1
Thermal Expansion
• A measure of the change in volume of a
sample of matter resulting from a
temperature change.

Section 7.1
Distinguishing Properties of Solids, Liquids, and
Gases

Section 7.1
Kinetic Molecular Theory of Matter

1. Matter is composed of tiny particles
(atoms, molecules, or ions) that have
definite and characteristic sizes that do
not change.

Section 7.1

2. The particles are in constant random
motion and therefore possess kinetic
energy.
 Kinetic energy – energy that matter
possesses because of particle motion.

Section 7.1

3. The particles interact with one another through
attractions and repulsions and therefore
possess potential energy.
 Potential energy – stored energy that matter
possesses as a result of its position,
condition, and/or composition.
 Electrostatic interaction – an attraction or
repulsion that occurs between charged
particles (ultimately responsible for the origin
of potential energy)
Section 7.1
4. The kinetic energy (velocity) of the

particles increases as the temperature is
increased.
– Kinetic energy of particles in a system
depends on the temperature (increases
with increase in temperature).

Section 7.1
5. The particles in a system transfer energy

to each other through elastic collisions.

Section 7.1
Differences Among Solids, Liquids, and Gases

• Explained by the relative magnitudes of
kinetic energy and potential energy
(electrostatic attractions).
• Kinetic energy is a disruptive force that
tends to make the particles of a system
increasingly independent of one another.
• Potential energy is a cohesive force that
tends to cause order and stability among
the particles of a system.

Section 7.2
Kinetic Molecular Theory and Physical States
Solid
• The physical state characterized by a
dominance of potential energy (cohesive
forces) over kinetic energy (disruptive
forces).
• Particles in a solid are drawn close
together in a regular pattern by the strong
cohesive forces present.
• Each particle occupies a fixed position,
about which it vibrates because of
disruptive kinetic energy.
Section 7.2
Solid

Section 7.2
Definite Volume and Definite Shape

• The strong, cohesive forces hold the
particles in essentially fixed positions,
resulting in definite volume and definite
shape.

Section 7.2
High Density
• The constituent particles of solids are
located as close together as possible
(touching each other). Therefore, a given
volume contains large numbers of
particles, resulting in a high density.

Section 7.2
Small Compressibility
• Because there is very little space between
particles, increased pressure cannot push
the particles any closer together;
therefore, it has little effect on the solid’s
volume.

Section 7.2
Very Small Thermal Expansion

• An increased temperature increases the
kinetic energy (disruptive forces), thereby
causing more vibrational motion of the
particles. Each particle occupies a slightly
larger volume, and the result is a slight
expansion of the solid. The strong,
cohesive forces prevent this effect from
becoming very large.

Section 7.2
Liquid
• The physical state characterized by
potential energy (cohesive forces) and
kinetic energy (disruptive forces) of about
the same magnitude.
• Particles that are randomly packed but
relatively near one another.
• The molecules are in constant, random
motion; they slide freely over one another
but do not move with enough energy to
separate.
Section 7.2
Liquid

Section 7.2
Definite Volume and Indefinite Shape

• The attractive forces are strong enough to
restrict particles to movement within a
definite volume. They are not strong
enough to prevent the particles from
moving over each other in a random
manner that is limited only by the
container walls.

Section 7.2
High Density
• The particles in a liquid are not widely
separated; they are still touching one
another. Therefore, there will be a large
number of particles in a given volume – a
high density.

Section 7.2
Small Compressibility
• Because the particles in a liquid are still
touching each other, there is very little
empty space. Therefore, an increase in
pressure cannot squeeze the particles
much closer together.

Section 7.2
Small Thermal Expansion

• Most of the particle movement in a liquid is
vibrational because a particle can move only a
short distance before colliding with a neighbor.
• The increased particle velocity that
accompanies a temperature increase results
only in increased vibrational amplitudes.
• The net effect is an increase in the effective
volume a particle occupies, which causes a
slight volume increase in the liquid.

Section 7.2
Gas
• The physical state characterized by a
complete dominance of kinetic energy
(disruptive forces) over potential energy
(cohesive forces).
• Attractive forces among particles are very
weak and are considered to be zero.
• The particles move essentially
independently of one another in a totally
random manner.

Section 7.2
Gas

Section 7.2
Indefinite Volume and Indefinite Shape

• The attractive (cohesive) forces between
particles have been overcome by high
kinetic energy, and the particles are free to
travel in all directions.
• Particles completely fill their container and
the shape of the gas is that of the
container.

Section 7.2
Low Density
• The particles are widely separated.
• There are relatively few particles in a
given volume, which means little mass per
volume.

Section 7.2
Large Compressibility
• A gas is mostly
empty space.
When pressure is
applied, the
particles are easily
pushed closer
together,
decreasing the
amount of empty
space and the
volume of the gas.
Section 7.2
Moderate Thermal Expansion

• An increase in temperature means an
increase in particle velocity.
• The increased kinetic energy enables the
particles to push back whatever barrier is
confining them, and the volume increases
- the space between the particles
changes.

Section 7.3
Gas Law Variables
Gas Law
• A generalization that describes in
mathematical terms the relationships
among the amount, pressure,
temperature, and volume of a gas.

Section 7.3
Gas Law Variables
Pressure
• The force applied per unit area on an object
force
Pr essure =
area
• 1 atm = 760 mm Hg = 760 torr

• 1 atm = 14.7 psi

Section 7.3
Gas Law Variables
Pressure of a Gas
• The force that creates pressure is that
which is exerted by the gas molecules or
atoms as they constantly collide with the
walls of their container.

Section 7.3
Gas Law Variables
Barometer
• A device used to measure atmospheric
pressure.

Section 7.3
Gas Law Variables
Barometer

Section 7.4
Boyle’s Law: A Pressure-Volume Relationship
Boyle’s Law
• Pressure and volume are inversely related
(constant T, temperature, and n, # of
moles).
P1 ´ V1 = P2 ´ V2

Section 7.4
Boyle’s Law

Section 7.4
Exercise
A sample of helium gas occupies 12.4 L at

23°C and 0.956 atm. What volume will it
occupy at 1.20 atm assuming that the
temperature stays constant?

Section 7.4
Exercise
A sample of helium gas occupies 12.4 L at

23°C and 0.956 atm. What volume will it
occupy at 1.20 atm assuming that the
temperature stays constant?
P1 ´ V1 = P2 ´ V2
(0.956 atm)(12.4 L) = (1.20 atm)(V2 )
V2 = 9.88 L

Section 7.5
Charles’s Law: A Temperature-Volume Relationship
Charles’s Law
• Volume and temperature (in Kelvin) are
directly related (constant P and n; # of
moles).
• K = °C + 273
V1 V2
=
T1 T2

Section 7.5
Charles’s Law

Section 7.5
Exercise
Suppose a balloon containing 1.30 L of air at

24.7°C is placed into a beaker containing liquid
nitrogen at –78.5°C. What will the volume of
the sample of air become (at constant
pressure)?

Section 7.5
Exercise
Suppose a balloon containing 1.30 L of air at

24.7°C is placed into a beaker containing liquid
nitrogen at –78.5°C. What will the volume of
the sample of air become (at constant
pressure)?
V1 V2
=
T1 T2
1.30 L V2
=
(24.7 + 273 ) (-78.5 + 273 )
V2 = 0.849 L
Section 7.6
The Combined Gas Law
• The product of the pressure and volume of a

fixed amount of gas is directly proportional
to its Kelvin temperature.
P1V1 P2 V2
=
T1 T2

Section 7.6
Exercise
At what temperature (in °C) does 121 mL of

CO2 at 27°C and 1.05 atm occupy a volume
of 293 mL at a pressure of 1.40 atm?

Section 7.6
Exercise
At what temperature (in °C) does 121 mL of

CO2 at 27°C and 1.05 atm occupy a volume
of 293 mL at a pressure of 1.40 atm?
P1V1 P2 V2
=
T1 T2
(1.05 atm )(121 mL ) = (1.40 atm )(293 mL )
(27+273 ) (T2 + 273 )
T2 = 969 K - 273
T2 = 696°C

Section 7.7
The Ideal Gas Law
• Describes the relationships among the

four variables – temperature, pressure,
volume and molar amount for a gaseous
substance (one comprehensive law):
PV = nRT
(where R = 0.0821 L·atm/mol·K`

Section 7.7
The Ideal Gas Law
Exercise
An automobile tire at 23°C with an internal

volume of 25.0 L is filled with air to a total
pressure of 2.18 atm (32 pounds per square
inch). Determine the number of moles of air
in the tire.

Section 7.7
The Ideal Gas Law
Exercise
An automobile tire at 23°C with an internal

volume of 25.0 L is filled with air to a total
pressure of 2.18 atm (32 pounds per square
inch). Determine the number of moles of air
in the tire.
PV = nRT
(2.18 atm)(25.0 L) = n(0.0821 L × atm/mol × K)(23+273 K)
n = 2.24 mol

Section 7.7
The Ideal Gas Law
Exercise
What is the pressure in a 304.0 L tank that

contains 5.670 kg of helium at 25°C?

Section 7.7
The Ideal Gas Law
Exercise
What is the pressure in a 304.0 L tank that

contains 5.670 kg of helium at 25°C?
PV = nRT
æ 5.670 ´ 1000 ö
(P)(304.0 L) = ç ÷ (0.0821 L × atm/mol × K)(25+273)
è 4.003 ø
n = 114 atm

Section 7.8
Dalton’s Law of Partial Pressures
• For a mixture of gases in a container,

PTotal = P1 + P2 + P3 + . . .
• The total pressure exerted by a mixture of
gases is the sum of the partial pressures of
the individual gases present.

Section 7.8

Section 7.8
Exercise
Consider the following container of helium at 45°C.

Initially the valve is closed.
– After the valve is opened, what is the pressure of
the helium gas?
2.00 atm
3.00 atm
9.00 L
3.00 L

Section 7.8
Exercise
Consider the following container of helium at 45°C.

Initially the valve is closed.
– After the valve is opened, what is the pressure of
the helium gas?
2.00 atm
3.00 atm
9.00 L
3.00 L
2.25 atm
Section 7.9
Changes of State
• A process in which a substance is

transformed from one physical state to
another physical state.
• Usually accomplished by heating or cooling
a substance, but pressure can also be a
factor.
• Changes of state are examples of physical
changes.

Section 7.9
Changes of State
Six Possible Processes Leading to Changes of State

• Freezing
• Melting
• Evaporation
• Condensation
• Sublimation
• Deposition

Section 7.9
Changes of State
Six Possible Changes of State

Section 7.9
Changes of State
Two Categories
1. Endothermic change of state – change of
state in which heat energy is absorbed.
– Melting
– Sublimation
– Evaporation

Section 7.9
Changes of State
Two Categories
2. Exothermic change of state – change of
state in which heat energy is given off.
– Freezing
– Condensation
– Deposition

Section 7.10
Evaporation of Liquids
• Process by which molecules escape from

the liquid phase to the gas phase.
• For a liquid to evaporate, its molecules must
gain enough kinetic energy to overcome the
attractive forces among them.

Section 7.10
Rate of Evaporation
• Increased surface area results in an
increased evaporation rate because a
greater fraction of the total molecules are on
the surface (so they are not completely
surrounded by other molecules with
attractive forces).

Section 7.10
Rate of Evaporation
• Always increases as liquid temperature
increases.
• A cooling effect is produced in the liquid
when evaporation occurs.
• Vapor – A gas that exists at a temperature
and pressure at which it ordinarily would be
thought of as a liquid or solid.

Section 7.11
Vapor Pressure of Liquids
Evaporation of a Liquid in a Closed Container
a) The liquid level drops for a time.

b) Then becomes constant (ceases to drop).
c) Rate of evaporation equals the rate of condensation.
Section 7.11
Equilibrium
• A condition in which two opposite processes
take place at the same rate.
• No net macroscopic changes can be detected,
but the system is dynamic.
• Forward and reverse processes are occurring at
equal rates.

Section 7.11
Vapor Pressure
• Pressure exerted by a vapor above a liquid
when the liquid and vapor are in equilibrium with
each other.
• Magnitude of vapor pressure depends on the
nature and temperature of the liquid.

Section 7.11
Vapor Pressure
• Liquids that have strong attractive forces
between molecules have lower vapor pressures
than liquids that have weak attractive forces
between particles.

Section 7.11
Vapor Pressure
• Substances that have high vapor pressures
evaporate readily – they are volatile.
 Volatile substance – a substance that readily
evaporates at room temperature because of a
high vapor pressure.

Section 7.12
Boiling and Boiling Point
Boiling
• A form of evaporation where conversion from the
liquid state to the vapor state occurs within the
body of the liquid through bubble formation.
• Occurs when the vapor pressure of the liquid
reaches a value equal to that of the prevailing
external pressure on the liquid (for an open
container it’s atmospheric pressure).

Section 7.12
Boiling

Section 7.12
Boiling Point
• The temperature at which the vapor pressure of
a liquid becomes equal to the external
(atmospheric) pressure exerted on the liquid.
• Normal boiling point – the temperature at which
a liquid boils under a pressure of 760 mm Hg.
• Boiling point changes with elevation.

Section 7.12
BP of Water at Various Locations That Differ in Elevation

Section 7.13
Intermolecular Forces in Liquids
Intermolecular Force
• An attractive force that acts between a molecule
and another molecule.
• Intermolecular forces are weak compared to
intramolecular forces.

Section 7.13
Dipole-Dipole Interactions
Between ClF Molecules

Section 7.13
Hydrogen Bonds
• Unusually strong dipole-dipole interactions are
observed among hydrogen-containing molecules
in which hydrogen is covalently bonded to a
highly electronegative element of small atomic
size (fluorine, oxygen, and nitrogen).

Section 7.13
Two Factors
1. The highly electronegative element to which

hydrogen is covalently bonded attracts the
bonding electrons to such a degree that the
hydrogen atom is left with a significant d+charge.
2. The small size of the “bare” hydrogen nucleus
allows it to approach closely, and be strongly
attracted to a lone pair of electrons on the
electronegative atom of another molecule.

Section 7.13
Hydrogen Bonding in Water

Section 7.13
• The vapor pressures of liquids that have

significant hydrogen bonding are much lower
than those of similar liquids wherein little or no
hydrogen bonding occurs.

Section 7.13

Section 7.13
London Forces
• A weak temporary intermolecular force that
occurs between an atom or molecule (polar or
nonpolar) and another atom or molecule (polar
or nonpolar).
• Results from momentary uneven electron
distributions in molecules.
• Significant in large atoms/molecules.
• Occurs in all molecules, including nonpolar
ones.

2021-22 - MODULE 7 - GASES - LIQUIDS - SOLIDS

Uploaded by

Copyright:

Available Formats

2021-22 - MODULE 7 - GASES - LIQUIDS - SOLIDS

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

2021-22 - MODULE 7 - GASES - LIQUIDS - SOLIDS

Uploaded by

Copyright:

Available Formats

Batch 2_ 1st Sem ay 2021-2022

INCHEM – Inorganic Chemistry MODULE 7

Common Physical Properties of Matter

Copyright © Cengage Learning. All rights reserved 3

Copyright © Cengage Learning. All rights reserved 4

Copyright © Cengage Learning. All rights reserved 5

Copyright © Cengage Learning. All rights reserved 6

Kinetic Molecular Theory of Matter

Copyright © Cengage Learning. All rights reserved 7

Kinetic Molecular Theory of Matter

Copyright © Cengage Learning. All rights reserved 8

Kinetic Molecular Theory of Matter

Kinetic Molecular Theory of Matter

4. The kinetic energy (velocity) of the

Copyright © Cengage Learning. All rights reserved 10

Kinetic Molecular Theory of Matter

5. The particles in a system transfer energy

Copyright © Cengage Learning. All rights reserved 11

Differences Among Solids, Liquids, and Gases

Copyright © Cengage Learning. All rights reserved 12

Copyright © Cengage Learning. All rights reserved 14

Definite Volume and Definite Shape

Copyright © Cengage Learning. All rights reserved 15

Copyright © Cengage Learning. All rights reserved 16

Copyright © Cengage Learning. All rights reserved 17

Very Small Thermal Expansion

Copyright © Cengage Learning. All rights reserved 18

Copyright © Cengage Learning. All rights reserved 20

Definite Volume and Indefinite Shape

Copyright © Cengage Learning. All rights reserved 21

Copyright © Cengage Learning. All rights reserved 22

Copyright © Cengage Learning. All rights reserved 23

Small Thermal Expansion

Copyright © Cengage Learning. All rights reserved 24

Copyright © Cengage Learning. All rights reserved 25

Copyright © Cengage Learning. All rights reserved 26

Indefinite Volume and Indefinite Shape

Copyright © Cengage Learning. All rights reserved 27

Copyright © Cengage Learning. All rights reserved 28

Moderate Thermal Expansion

Copyright © Cengage Learning. All rights reserved 30

Copyright © Cengage Learning. All rights reserved 31

• The force applied per unit area on an object

• 1 atm = 760 mm Hg = 760 torr

Copyright © Cengage Learning. All rights reserved 32

Copyright © Cengage Learning. All rights reserved 33

Copyright © Cengage Learning. All rights reserved 34

Copyright © Cengage Learning. All rights reserved 35

Copyright © Cengage Learning. All rights reserved 36

Copyright © Cengage Learning. All rights reserved 37

A sample of helium gas occupies 12.4 L at

Copyright © Cengage Learning. All rights reserved 38

A sample of helium gas occupies 12.4 L at

Copyright © Cengage Learning. All rights reserved 39

Copyright © Cengage Learning. All rights reserved 40

Copyright © Cengage Learning. All rights reserved 41

Suppose a balloon containing 1.30 L of air at

Copyright © Cengage Learning. All rights reserved 42

Suppose a balloon containing 1.30 L of air at