It Is The Process of Inspecting All Incoming and Outgoing Materials and Products, As Well As Manufacturing Procedures

1st slide
What is inspection?
It is the process of inspecting all incoming and outgoing materials and products,
as well as manufacturing procedures.
First When we say INSPECTION, this is the process of checking the products
functionality. Usually in inspection, it checks the acceptability of a manufactured
product.
-Si quality control inspector yung inchnarge dito to check the before, during and after
result ng manufacturing procedure
2nd slide
Kinds of inspections
-Bakit nga ba kailangan na before, during and after the process mag inspect?
• Field Inspections
This where the organizations standards measured such as operational procedures, site
safety, compliance, and product quality.
-kung mapapansin niyo di lang pala basta sa product dapat mag inspect. And bottom
line ng, inspection before the process is to check the safeness of not just the product
itself, but also yung safety rin manpower or even machines. Para bago palang mag start
yung manufacturing process makikita na nila yung problem at marereselove ng mas
maaga.
 Receiving Inspection
A receiving inspection serves as a gate keeper prior to a product reaching the inventory.
-same as with the first inspection. Kanina yung safety ng site at ng manpower yung
chinecheck nila, sa receiving inspection naman ang main objective nito is to check
defects and wrong orders of materials before it became an inventory para ma lessen or
better na maremove yung possibility ng defects during the procedure. At mareturn nila
yung orders prior to the starting day of the manufacturing process
 Returned Material Inspection
As a manufacturer. hindi lang yung materials needed natin yung possible na

ma-return. Hindi lang tayo yung nagrereturn sa supplier natin. Yung services and
goods na na produce natin kahit nag inspect na nang ilang ulit ay possible parin
magkaroon ng return items from us. In this scenario the person incharge will
check the defective product na nareceive ng consumer from as para malaman
yung next step kung ano ba yung need ayusin and if possible, ma return or
refund yung binayad ni customer.
 Monitor or observe operations

-this to ensure that during the procedure they meet production standards para sa
una pa lang natatama at nareresolve at makapag adjust na. bago pa maging
finished product mapra malessen yung return items katulad sa sinabi ko kanina..
 Final Inspection
-Accept or reject finished items
This is the double checking even during the process had been checked they have
to check it again and again to ensure that the said defects have been corrected
and recorded as well.
 Stocked Re-Inspections
- Product quality can change over time so testing intervals are established hindi
lang basta sa mga perishable goods ito applicable. Applicable din to when it
comes sa checking ng right amount of supplies, the maintaining of the
standardized quality para ma ensure na sa next manufacturing day ay well
organized and well prepared yung mga needed na materials and stocks. After
Makita yung defects and lacks of supply they can restock and order again right
before the process starts.
3rd slide
Why does inspection is important in managing quality?
 Minimizes risks
-with the help of inspection namiminimized yung risk of returned items and defects and
spoilage also help to maintain the satisfactions ng consumers
 Saves Money
 Saves Time
It will save time and money. Saves time kasi sa una palang nag dodouble check
na tayo if there are something wrong between the site of production and the
materials needed para maresolve agad and not time-consuming kung last minute
na napansin yung defects kasi every time na magsstart yung process nag iinspect
na. sa money naman, obviously kung quality yung products natin maliit yung
possibility na may mag return ng products and even meron man using the proper
inspection na lelessen natin yun.
 Supplier Control
-Factory owners are significantly more conscientious when aware inspections
could take place at any time. This reduces the incidence of lower quality,
fraudulent or defective work.
 Brand Protection
- “trust is hard to earn and easy to lose”
Providing good quality products helps to increase customer satisfaction, loyalty, and
trust. Satisfied customers are not only repeat customers but also evangelizes for your
brand. To maintain this requires your products meet, or exceed, customers’ expectations.
https://www.invensislearning.com/blog/quality-control-inspector-roles-responsibilities/
https://www.tiptech.com/blog/articles/understanding-the-quality-inspection-process/
https://www.careerexplorer.com/careers/quality-control-inspector/#:~:text=Quality%20control
%20inspectors%3A%201%20Read%20and%20understand%20blueprints,for%20products
%209%20Report%20inspection%20and%20test%20data
https://www.hqts.com/six-reasons-why-quality-control-inspections-are-important/

It Is The Process of Inspecting All Incoming and Outgoing Materials and Products, As Well As Manufacturing Procedures

Uploaded by

Copyright:

Available Formats

It Is The Process of Inspecting All Incoming and Outgoing Materials and Products, As Well As Manufacturing Procedures

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

It Is The Process of Inspecting All Incoming and Outgoing Materials and Products, As Well As Manufacturing Procedures

Uploaded by

Copyright:

Available Formats

1st slide

As a manufacturer. hindi lang yung materials needed natin yung possible na

 Monitor or observe operations

-Accept or reject finished items

Why does inspection is important in managing quality?

You might also like