WIRE CONTROLLER OF AIR CONDITIONER

,
OWNER S MANUAL

MODEL: KJR-10B

Please read this manual carefully before operation and keep

it for future reference.
 CONTENTS

SAFETY PRECAUTION----------------------------------------------------------------------1

WIRE CONTROLLER SUMMARIZE------------------------------------------------------ -2

FUNCTION SUMMARIZE--------------------------------------------------------------------3

NAME AND FUNCTIONS OF LCD ON THE WIRE CONTROLLER-------------------4

INSTALLATION METHOD---------------------------------------------------- ---------------5

NAME AND FUNCTIONS OF BUTTONS ON WIRE CONTROLLER------------------6

THE USING OF WIRE CONTROLLER-----------------------------------------------------7

AUTOMATIC OPERATION

COOLING/DRY/HEATING/FAN ONLY OPERATION

DEHUMIDIFICATION OPERATION

SET THE CLOCK

TIMER OPERATION

TECHNIQUE SPECIFICATION AND REQUIREMENT ---------------------------------8

SAFETY PRECAUTION

The followings are showed on products and the manual:the operation, how to
avoid injuring to personal, wealth loss and how to operate correctly and safely
Read the text carefully after read the followings include markers and icons,
then abide to the following cautions
Markers Icons
Markers Indication Icons Indication

The sign shows the risk of death

or serious injury will be caused
! WARNING due to the wrongoperation .
FORBID Followed by the detailed illustration

The sign shows the risk of

! CAUTION injury or the damage to the
property will be caused due
ENFORCE Followed by the detailed illustration
to the wrong operation.

NOTE :
1. Injury means causing from the harm, burn and electrical shock , but not serious for the
hospitalization.
2. The damage of material means the disrepair of property and material.
! WARNING
INSTALLATION

Please entrust the dealer or the professional person to do the

WARNING

installation.
Installation
Users can t install the units by themselves, or the electrical
commitment
shock or fire may be caused.

Do not spray inflammable liquid on the Wire Controller, or

OPERATION
CAUTION

fire may be caused.

FORBID Do not operate with wet hands. Do not let water go into the
Wire Controller, or electric shock hazard may have.

If you want to move or re-install your Wire Controller,

MOVE AND REPAIR

please contact with local dealer.

!
CAUTION

Do not disassemble your Central Controller at will. If it is

FORBID needed, please contact the local dealer.
A random disassembly may cause abnormal operation or
heating, which may result in fire.

1
WIRE CONTROLER SUMMARIZE

The basic operation conditions of wire controller are as follows:

1. The range of power supply voltage: the voltage input is 5V DC.
2.Ambient temperature range: - 15 +43 .
3.Ambient humidity range: RH40% RH90%.
4.The safety certification of electric control should conformto GB4706.32-
2004 GB/T7725-2004.

FUNCTION SUMMARIZE

The wire controller has functions as follows:

1. Connect with indoor units with five terminals of A,B,C,D,E.
2. Set the mode through buttons.
3. LCD display.
4. Display the timer function of remain time

NAME AND FUNCTION OF LCD ON THE WIRE CONTROLLER

2 FAN speed

1 MODE display

4 LOCK display

5 CLOCK display

6 OFF/ON display

7 Temperature display
3 Economical operation display

1 Mode select button (MODE):

Press MODE button to select COOL , DRY , "HEAT", or "FAN ONLY" mode.
(HEAT is invalid for COOL ONLY wire controller.)
2 Fan speed button (FAN SPEED)
Press FAN SPEED to select fan speed from "AUTO", "LOW"," MED" , and "HIGH”.
NOTE: some air conditioners have no MED fan speed, then the MED is regarded as
HIGH.
3 Economical operation display:
Press ECONOMICAL to display economical operation, if press ECONOMICAL
again then the display disappears
4 Lock display
Press LOCK to display the icon of LOCK. Press the button again then the icon of LOCK
disappears. In the mode of LOCK, all the buttons are invalid except for LOCK button.

2
5 CLOCK display
Usually display the clock set currently. Press the button CLOCK for 4 seconds,the HOUR part
will flash, press button and to adjust HOUR. Press the button CLOCK again, the minute
part flash, press button or to adjust MINUTE. After clock set or clock operation, it must
press CONFIRM to complete the set.
6. TIMER ON/OFF display:
Display ON at the state of TIMER ON adjustment or after only set the TIMER ON; Display OFF
at the state of TIMER OFF adjustment or after only set the TIMER OFF; Display ON/OFF if
simultaneously set the mode of TIMER ON and TIMER OFF.
7. Temperature display area:
Usually display the set temperature. Press the buttons of and to set temperature, at the mode
of FAN, there is no figure display in the area.

INSTALLATION METHOD
CONNECTION MOTHOD AND THE PRINCIPLE DIAGRAM SHOW AS FOLLOW

Wire Joint, 5p
Infraed Pipe
Wire Controller

+5

5-Core Shield Cable,the length

RUN
i s de c i d e d b y i n s t a l l a t i o n
Indoor Unit Switch Board

Indoor Unit

Installation interpretation:

When the air conditioner needs installing the wire controller, an additional 5-terminal is
needed to install in indoor unit, fasten a infrared emission (fasten with glue), connect the
anode and the cathode respectively to A and B on the end, then connect the +5V GND and
RUN respectively to C D and E on the end

3
NAME AND FUNCTIONS OF BUTTONS
ON WIRE CONTROLLER

ON OF BUTTON

mode selection button FAN SPEED SELECTION

timer on button AJUDSTMENT BUTTON

TIMER ON CLOCK ECONOMICAL

timer off button AJUDSTMENT BUTTON

TIMER OFF CONFIRM MODE FAN SPEED SWING TEMP

clock button
SWING BUTTON
confirm button REPLACE LOCK COOL
HEATING
ECONOMICAL button
replace nutton
COOL ONLY/COOL AND
HEATING SELECTION BUTTON

LOCK BUTTON

1 mode selection button:

It is used to select mode, push the button one time, then the operation modes will change
in turn as follows:

AUTO COOLING DEHUMIDIFY HEATING FAN

Remarks: no heating mode if wire controller is set as the cool only.

2 timer on button:
Push the button to set TIMER ON, each time you push the button the time moves forward
by o.5 hours. When the set time is over 10 hours, each time you push the button the time moves
forward by 1 hour. If want to cancel the TIMER ON, then adjust the time of TIMER ON as 0.0
3 timer off button:
Push the button to set TIMER OFF, each time you push the button the time moves
forward by o.5 hours. When the set time is over 10 hours, each time you push the button the
time moves forward by 1 hour. If want to cancel the TIMER OFF, then adjust the time of TIMER
OFF as 0.0
4 CLOCK button:
Normally display the clock set currently (display 12:00 for the first electrifying or resetting).
When push the button for 4 seconds, the hour part on the clock display flashes every 0.5
seconds, then push button and to adjust hour; push the button CLOCK again, the minute
part flashes every 0.5 seconds, then push and button to adjust minute. When set clock or alter
clock setting, must push the confirm button to complete the setting.

4
5 Confirm button:
The button is used at the state of CLOCK adjustment. After select the time, push the button
to confirm then exit, the current clock will display
6 RESET button (hidden):
Use a small stick with a diameter of 1mm to push the RESET button to cancel the current
settings and get into the condition of resetting
7 ON/OFF button:
Push the button at the condition of OFF, the OPERATION lamp lights, ans the wire controller
enters into ON operation, simultaneously sends the information of operation mode set
currently, temperature, fan speed, timer etc. Push the button at the conditionof ON, the
OPERATION lamp extinguishes, simultaneously sends the OFF. If having set TIMER ON or
TIMER OFF, the wire controller will cancel these settings before entering into OFF, close the
concern indicator, and then send the OFF information.
8 Fan speed selection button (FAN SPEED)
Select any one fan speed from "AUTO", "LOW"," MED" , and "HIGH . Each time push the
button, the fan speed will change in turn as fellow.

9 adjustment button:
Push the button, indoor temperature increases. Push the button continuously then the
temperature increasesby 1 per 0.5 seconds.
10 adjustment button:
Push the button, indoor temperature decreases. Push the button continuously then the
temperature decreases by 1 per 0.5 seconds
11 swing button:
Push this button for the first time when operation,it will start the swing function. Push the
button for the second time, cancel the swing function.
(The function is available matched with the concerned unit)
12 Economical button:
Push the button to set the economical operation mode for air conditioner, push again then
cancel the mode. The operation mode is suitable for
sleeping time..
13 Cool only/cooling and heating selection button (hidden):
Use a small stick with a diameter of 1mm to push the button to switch modes.For COOLING
ONLY type, it will be no heating mode when pressing
MODE. The uniform mode is COOLING and HEATING at
the factory.
14 LOCK button (hidden):
Use a small stick with the diameter of 1mm to push the LOCK button to lock the current
setting, push the button again then cancel the setting.

5
THE USING OF WIRE CONTROLLER
AUTOMATIC OPERATION

Insert the power supply, operation lamp of indoor unit flashes.

1 Push MODE to select AUTO
2 Set the desired temperature by pushing the button and , usually the temperature
range is set from 17 to 30
3 push ON/OFF, the operation lamp of indoor unit lights, the air conditioner start
operating at the AUTO mode, the fan speed is controlled automatically, wire controller
display screen display AUTO the fan speed is un-adjustable. Push the button ON/OFF
again, then the air conditioner stops operating.
4 The ECONOMICAL button is available at the AUTO operation mode
5 THE OPERATION OF COOL/HEAT (COOL ONLY unit hasn't the function)/FAN
1) Push the button MODE to select any one of COOL", "DRY , "HEAT", or "FAN
ONLY" mode
2) Select the desired temperature by pushing the button and , usually the temperature
range is set from 17 to 30
3) Push the button FAN SPEED to select any one of AUTO", "LOW , "MIDDLE", or
"HIGH" fan speed modes.
4) Push the button ON/OFF, the operation lamp on indoor unit lights, the air conditioner
operates according to the mode selected. Push the button ON/OFF again, stop the air
conditioner.
Remark: It can not set temperature at FAN mode, and only operate the step 1,3 and 4.
The economical button is invalid at FAN mode.
DEHUMIDIFY OPERATION
1 Press MODE to select DEHUMIDIFY mode.
2 Select the desired temperature by pressing the button and , usually the temperature
range is set from 17 to 30
3 Push the button ON/OFF, the operation lamp of indoor unit lights, and the air
conditioner will start to dehumidifying. Press the button ON/OFF again, stop the air
conditioner.
4 The button FAN SPEED and ECONOMICAL are invalid in the mode DEHUMIDIFY
TIMER setting
Button TIMER ON can set the starting time.
Button TIMER OFF can set the stopping time.
Only set the time of TIMER ON
1) Push button TIMER ON, the wire controller display SETTING, the icons of HOUR and
ON display on the timer setting area. The wire controller enter into the setting of timer on
2) Push button TIMER ON again, and then adjust the time of timer on as your desired.
3) Continuously push the button, the time of timer will increase 0.5 hours per time. After
the time of timer reaches to 10 hours, the time will increase 1hour each time.
4) 0.5 seconds later, after finishing the adjustment, the wire conditioner sends the
information of time on, the timer on setting is completed.
Only set the time of timer off
1) Push button TIMER OFF, the wire controller display SETTING, the icons of HOUR and
OFF display on the timer setting area. The wire controller enters into the setting of timer off.
2) Push button TIMER OFF again, and then adjust the time of timer off as your desired.
3) Continuously push the button, the time of timer will increase 0.5 hours per time. After
the time of timer reaches to 10 hours, the time will increase 1hour each time.
4) 0.5 seconds later, after finishing the adjustment, the wire conditioner sends the
information of timer off, the timer off setting iscompleted.

6
set the time of TIMER ON and TIMER OFF simultaneously
1) Refer to step 1 and step 2 of TIMER ON to set the TIMER ON
2) Refer to step 1 and step 2 of TIMER OFF to set the TIMER OFF
3) When set the TIMER ON and TIMER OFF simultaneously, if the set times of TIMER ON
and TIMER OFF are all over 10 hours, then TIMER OFF is always later 1 hour than TIMER ON.
4) 0.5 seconds later, after finishing the adjustment, the wire conditioner sends the
information of timer onf, the timer off and timer on setting arecompleted.
Alter the timer
To alter the time of TIMER ON of TIMER OFF, push the timer button to confirm once more.
Adjust the time of TIMER ON and TIMER OFF as 0.0 to cancel the TIMER ON of TIMER OFF
Remark: the time of TIMER ON is the relative time; it is relative to the standard time
ofoperating wire controller. If having setting the TIMER ON or TIMER OFF, then the clock can
not be adjusted.

TECHNIQUE CERTIFICATION AND REQUIREMENT

1) EMC and EMR should conform to the CE certification

2) Electrical facility safety should conform to the requirements of GB4706.32-2004 and
GB/T7725-2004