ME 2252 MANUFACTURING TECHNOLOGY – II 3 0 0 3
OBJECTIVE
To understand the concept and basic mechanics of metal cutting, working of standard
machine tools such as lathe, shaping and allied machines, milling, drilling and allied
machines, grinding and allied machines and broaching
To understand the basic concepts of computer numerical control (CNC) machine tool
and CNC programming.
UNIT I THEORY OF METAL CUTTING 9(L)
Introduction: material removal processes, types of machine tools – theory of metal
cutting: chip formation, orthogonal cutting, cutting tool materials, tool wear, tool life,
surface finish, cutting fluids.
Unit II CENTRE LATHE AND SPECIAL PURPOSE LATHES 9(L)
Centre lathe, constructional features, cutting tool geometry, various operations, taper
turning methods, thread cutting methods, special attachments, machining time and
power estimation. Capstan and turret lathes – automats – single spindle, Swiss type,
automatic screw type, multi spindle - Turret Indexing mechanism, Bar feed mechanism.
UNIT III OTHER MACHINE TOOLS 9(L)
Reciprocating machine tools: shaper, planer, slotter - Milling : types, milling cutters,
operations - drilling - Quill mechanism , Reaming, Boring, Tapping -
Sawing machine: hack saw, band saw, circular saw; broaching machines: broach
construction – push, pull, surface and continuous broaching machines
UNIT IV ABRASIVE PROCESSES AND GEAR CUTTING 9(L)
Abrasive processes: grinding wheel – specifications and selection, types of grinding
process – cylindrical grinding, surface grinding, centreless grinding – honing, lapping,
super finishing, polishing and buffing, abrasive jet machining - Gear cutting, forming,
generation, shaping, hobbing.
UNIT V CNC MACHINE TOOLS AND PART PROGRAMMING 9(L)
Numerical control (NC) machine tools – CNC: types, constructional details, special
features – design considerations of CNC machines for improving machining accuracy –
structural members – slide ways –linear bearings – ball screws – spindle drives and feed
drives. Part programming fundamentals – manual programming – computer assisted
part programming.
Total Number of Periods: L=45 T= 0 45 Periods(VISIT http://aimforhigh.blogspot.com)
TEXT BOOKS
1. Hajra Choudry, “Elements of Work Shop Technology – Vol. II”, Media Promoters.
2002
2. HMT – “Production Technology”, Tata McGraw-Hill, 1998.
18
REFERENCE BOOKS
1. Rao, P.N. “Manufacturing Technology”, Metal Cutting and Machine Tools, Tata
McGraw–Hill, New Delhi, 2003.
2. P.C. Sharma, “A Text Book of Production Engineering”, S. Chand and Co. Ltd, IV
edition, 1993.
3. Shrawat N.S. and Narang J.S, ‘CNC Machines’, Dhanpat Rai & Co., 2002.
4. P.N.Rao, ‘CAD/CAM Principles and Applications’, TATA Mc Craw Hill, 2007.
5. M.P.Groover and Zimers Jr., ‘CAD/CAM’ Prentice Hall of India Ltd., 2004.
6. Milton C.Shaw, ‘Metal Cutting Principles’, Oxford University Press, Second Edition,
2005.
7. Rajput R.K, ‘Atext book of Manufacturing Technology’, Lakshmi Publications, 2007.
8. Philip F.Ostwald and Jairo Munoz, ‘Manufacturing Processes and systems’, John
Wiley and Sons, 9th Edition,2002.
9. Mikell P.Groover, ‘Fundamentals of Modern Manufacturing,Materials, Processes and
Systems’, John Wiley and Sons, 9th Edition,2007.
10. Chapman. W. A. J and S.J. Martin, Workshop Technology, Part III, Viva Books
Private Ltd., 1998
19
Emm
ME 2253 ENGINEERING MATERIALS AND METALLURGY 3 0 0 3
(Common to Mechanical & Automobile)
OBJECTIVE
To impart knowledge on the structure, properties, treatment, testing and applications of
metals and non-metallic materials so as to identify and select suitable materials for
various engineering applications.
Review (Not for Exam):
Crystal structure – BCC, FCC and HCP structure – unit cell – crystallographic planes
and directions, miller indices – crystal imperfections, point, line, planar and volume
defects – Grain size, ASTM grain size number.
UNIT I CONSTITUTION OF ALLOYS AND PHASE DIAGRAMS 9(L)
Constitution of alloys – Solid solutions, substitutional and interstitial – phase diagrams,
Isomorphous, eutectoid, eutectic, peritectic, and peritectroid reactions, Iron – Iron
carbide equilibrium diagram. Classification of steel and cast Iron, microstructure,
properties and applications.
UNIT II HEAT TREATMENT 9(L)
Definition – Full annealing, stress relief, recrystallisation and spheroidizing –normalising,
hardening and tempering of steel. Isothermal transformation diagrams – cooling curves
superimposed on I.T. diagram, CCR - Hardenability, Jominy end quench test –
Austempering, martempering – case hardening - carburising, nitriding, cyaniding,
carbonitriding, flame and induction hardening.
UNIT III MECHANICAL PROPERTIES AND TESTING 9(L)
Mechanism of plastic deformation, slip and twinning – Types of fracture – Testing of
materials under tension, compression and shear loads – Hardness tests (Brinell, Vickers
and Rockwell), Impact test - Izod and Charpy, Fatigue and creep tests, fracture
toughness tests.
UNIT-IV : FERROUS AND NON FERROUS METALS 9(L)
Effect of alloying elements on steel (Mn, Si, Cr, Mo, V, Ti & W) - stainless and tool steels
– HSLA - maraging steels – Cast Irons - Grey, White malleable, spheroidal – Graphite,
Alloy cast irons, Copper and Copper alloys - Brass, Bronze and Cupronickel – Aluminum
and Al-Cu alloy – precipitation hardening– Bearing alloys.
UNITV NON-METALLIC MATERIALS 9(L)
Polymers – types of polymer, commodity and engineering polymers – Properties and
applications of PE, PP, PS, PVC, PMMA, PET, PC, PA, ABS, PI, PAI, PPO, PPS, PEEK,
PTFE Polymers – Urea and Phenol Formaldehydes – Engineering Ceramics –
Introduction to Fibre reinforced plastics. Total Number of Periods: L= 45 T= 0 45(VISIT
http://aimforhigh.blogspot.com)
TEXT BOOKS
1. Kenneth G.Budinski and Michael K.Budinski “Engineering Materials” Prentice-Hall of
India Private Limited, 4th Indian Reprint 2002.
REFERENCE BOOKS
1. William D Callister “Material Science and Engineering”, John Wiley and Sons 2007.
2. Raghavan.V “Materials Science and Engineering”, Prentice Hall of India Pvt., Ltd.,
2007.
3. Sydney H.Avner “Introduction to Physical Metallurgy” McGraw Hill Book Company,
2007.
4. Dieter G. E., Mechanical Metallurgy, Mc Graw Hill Book Company, 1988.
5. O.P. Khanna , A text book of Materials Science and Metallurgy, Khanna Publishers,
2003.
6. Vijaya. M.S. and G. Rangarajan, Material Science, Tata McGraw-Hill , 2007
20
click here to read more: http://aimforhigh.blogspot.com/2010/12/me2253-engineering-materials-
and.html#ixzz1JhOdEH7B
more question bank and prevoius year question paper
