Multifunctional Flash Microcomputer Programmer: Sunny Giken Inc
Multifunctional Flash Microcomputer Programmer: Sunny Giken Inc
Parallel
Stand-alone
Single Programming
When you donʼt have to make
changes to the programming
data, disconnect the programmer
Faster communication form the PC after loading data
and use it in stand-alone mode.
Signal pin contact test You can complete a consecutive
programming with a single button
Supports parallel and serial programming modes operation. You will be notified of
the programming status, such as
finished or error, with the LEDs
Supports gang programmers te
Parallel Ga on the unit and buzzer.
mo ng
Re Development Mass Production
Supports stand-alone operations Maintenance
Windows98/Me/2000/XP compatible
Supports boot area, lock bit, and block functions PC+Gang Programming
Use this programmer as a gang
Meets the requirements for CE marking and FCC programmer, by connecting maximum
llel Gang of 8 parallel adapters. It displays the
Para
programming data checksum, number
of processed chips, error counts for
each channel when you use it with a
PC connected. Most suitable for
mass-production lines.
ote Serial Development Mass Production
Rem
Serial Maintenance
PC+On-board Programming
Stand-alone On-board Programming Connect a PC for a single parallel programming. With this function, you can
No external power supply is necessary as it uses the easily program programs under development or other data repeatedly to
power supply form the target board. Most suitable the on-board MCU. You can conduct independent operations such as erase
for maintenance, as you can use it outdoors. and verify, and also program into user area, data area and boot area.
Development Mass Production Maintenance Development Mass Production Maintenance Very convenient (Recommended)
Suitable
Unusual use (Usable)
Multi-function flash programmer, supporting serial programming and parallel programming [Multi Flash Writer S550-MFW1U]
[S550-MFW1U] is the Renesas Technologyʼs Flash Memory built-in Flash Micro-Computer Programmer. Faster communication is achieved by adopting
USB interface with PC. Though its size is small, both of serial and parallel programming can be achieved. Gang programming is also available by using
adapter(s). Multifunctional Flash Microcomputer Programmer also has variety of functions such as Entier-pin Contact Test.
[S550-MFW1U] Features
Faster Communication Supports Windows98/Me/2000/XP
Employing the USB Interface has increased the communication speed, two PC control is used for programming data to flash microcomputers, for saving
times faster than the existing model [MFW-1]. data from flash microcomputers to the PC, and for other control functions.
The Graphical User Interface (GUI) makes the PC operations easy to
understand. The GUI software supports Windows98/Me/2000/XP.
Signal Pin Contact Test
Most of the problems that occur in microcomputer programming are related to poor contact
between a microcomputer and an IC socket. This flash microcomputer programmer
automatically tests a contact with an IC socket before programming data to a microcomputer.
*1)Details are on S550-MFW1U programmable device list. Be sure to check the list on our home page before purchasing.
*2)S550-MFW1U does not support clock-asynchronous serial I/O.
*3)Personal computer with USB2.0 can also be used.
-The products of other companies are the registered trade marks or trade marks of those respective companies.
-The information contained herein can be changed at any time without prior notice to make improvements.
-Contents of this pamphlet may be revised without notice. Please visit our website for the latest information.