Woodward Installation

Installation Procedure Supplement
Manual 26860 (Revision A, 1/2016)

EPG Electrically Powered Governor
See manual 82493 for complete installation, operation, maintenance, and certification
information. Publications can be found on our website at www.woodward.com/publications.
Important Definitions
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety
messages that follow this symbol to avoid possible injury or death.
 DANGER—Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
 WARNING—Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
 CAUTION—Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
 NOTICE—Indicates a hazard that could result in property damage only (including damage to the control).
 IMPORTANT—Designates an operating tip or maintenance suggestion.
The engine, turbine, or other type of prime mover should be equipped with an
overspeed shutdown device to protect against runaway or damage to the prime
mover with possible personal injury, loss of life, or property damage.
The overspeed shutdown device must be totally independent of the prime mover
control system. An overtemperature or overpressure shutdown device may also
be needed for safety, as appropriate.
Read this entire manual and all other publications pertaining to the work to be performed before
installing, operating, or servicing this equipment. Practice all plant and safety instructions and
precautions. Failure to follow instructions can cause personal injury and/or property damage.
This publication may have been revised or updated since this copy was produced. To verify that
you have the latest revision, check manual 26455, Customer Publication Cross Reference and
Revision Status & Distribution Restrictions, on the publications page of the Woodward website:
www.woodward.com/publications
The latest version of most publications is available on the publications page. If your publication is
not there, please contact your customer service representative to get the latest copy.
Any unauthorized modifications to or use of this equipment outside its specified mechanical,
electrical, or other operating limits may cause personal injury and/or property damage, including
damage to the equipment. Any such unauthorized modifications: (i) constitute "misuse" and/or
"negligence" within the meaning of the product warranty thereby excluding warranty coverage
for any resulting damage, and (ii) invalidate product certifications or listings.
To prevent damage to a control system that uses an alternator or battery-charging

device, make sure the charging device is turned off before disconnecting the battery
from the system.
To prevent damage to electronic components caused by improper handling, read

and observe the precautions in Woodward manual 82715, Guide for Handling and
Protection of Electronic Controls, Printed Circuit Boards, and Modules.
Woodward Publication 26860 page 1

Go to www.woodward.com/publications for complete instructions (manual 82493).
Replacement/Exchange: Replacement/Exchange is a premium program designed for the user who is in need of
immediate service. It allows you to request and receive a like-new replacement unit in minimum time (usually within
24 hours of the request), providing a suitable unit is available at the time of the request, thereby minimizing costly
downtime.
This option allows you to call your Full-Service Distributor in the event of an unexpected outage, or in advance of a
scheduled outage, to request a replacement control unit. If the unit is available at the time of the call, it can usually be
shipped out within 24 hours. You replace your field control unit with the like-new replacement and return the field unit
to the Full-Service Distributor.
Flat Rate Repair: Flat Rate Repair is available for many of the standard mechanical products and some of the
electronic products in the field. This program offers you repair service for your products with the advantage of
knowing in advance what the cost will be.
Flat Rate Remanufacture: Flat Rate Remanufacture is very similar to the Flat Rate Repair option, with the exception
that the unit will be returned to you in “like-new” condition. This option is applicable to mechanical products only.
Returning Equipment for Repair

If a control (or any part of an electronic control) is to be returned for repair, please contact your Full-Service
Distributor in advance to obtain Return Authorization and shipping instructions.
When shipping the item(s), attach a tag with the following information:
 return number;  name and location where the control is installed;
 name and phone number of contact person;  complete Woodward part number(s) and serial number(s);
 description of the problem;  instructions describing the desired type of repair.
Contacting Woodward’s Support Organization

For the name of your nearest Woodward Full-Service Distributor or service facility, please consult our worldwide
directory published at www.woodward.com/directory.
You can also contact the Woodward Customer Service Department at one of the following Woodward facilities to
obtain the address and phone number of the nearest facility at which you can obtain information and service.
Products Used In Products Used In Products Used In
Electrical Power Systems Engine Systems Industrial Turbomachinery
Systems
Facility --------------- Phone Number Facility --------------- Phone Number Facility --------------- Phone Number
Brazil ------------- +55 (19) 3708 4800 Brazil ------------- +55 (19) 3708 4800 Brazil ------------- +55 (19) 3708 4800
China ----------- +86 (512) 6762 6727 China ----------- +86 (512) 6762 6727 China ----------- +86 (512) 6762 6727
Germany: Germany ------ +49 (711) 78954-510 India --------------- +91 (129) 4097100
Kempen---- +49 (0) 21 52 14 51 India --------------- +91 (129) 4097100 Japan---------------+81 (43) 213-2191
Stuttgart - +49 (711) 78954-510 Japan---------------+81 (43) 213-2191 Korea ---------------+82 (51) 636-7080
India --------------- +91 (129) 4097100 Korea ---------------+82 (51) 636-7080 The Netherlands--+31 (23) 5661111
Japan---------------+81 (43) 213-2191 The Netherlands--+31 (23) 5661111 Poland -------------- +48 12 295 13 00
Korea ---------------+82 (51) 636-7080 United States -----+1 (970) 482-5811 United States -----+1 (970) 482-5811
Poland -------------- +48 12 295 13 00
United States -----+1 (970) 482-5811
ËB26860:A¶¸·¸´ Î
Woodward reserves the right to update any portion of this publication at any time. Information provided by Woodward is
believed to be correct and reliable. However, no responsibility is assumed by Woodward unless otherwise expressly
undertaken.
Copyright © Woodward 2015
All Rights Reserved
PO Box 1519, Fort Collins CO 80522-1519, USA

1000 East Drake Road, Fort Collins CO 80525, USA
Phone +1 (970) 482-5811  Fax +1 (970) 498-3058
Email and Website—www.woodward.com

Regulatory Compliance & Declarations

Woodward Installation

Uploaded by

Copyright:

Available Formats

Woodward Installation

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Woodward Installation

Uploaded by

Copyright:

Available Formats

Installation Procedure Supplement

Manual 26860 (Revision A, 1/2016)

To prevent damage to a control system that uses an alternator or battery-charging

To prevent damage to electronic components caused by improper handling, read

Woodward Publication 26860 page 1

Returning Equipment for Repair

Contacting Woodward’s Support Organization

PO Box 1519, Fort Collins CO 80522-1519, USA

Email and Website—www.woodward.com

Woodward Publication 26860 page 2

Woodward Publication 26860 page 3

You might also like