Scribd
Upload
159 views21 pages

Driver Setup Manual

This document provides instructions for installing and setting up an 80 Series printer driver on Windows. It describes downloading and running the installation file, selecting the printer model and port during setup, and configuring the serial, parallel, USB or Ethernet port in the printer properties. It also explains how to print a test page to verify the installation and connection to the computer is working properly. Other settings like paper size, cash drawer functions, and enabling voice guidance for printing can be configured as well.

Uploaded by

Sadjiwo Bagio
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
159 views21 pages

Driver Setup Manual

This document provides instructions for installing and setting up an 80 Series printer driver on Windows. It describes downloading and running the installation file, selecting the printer model and port during setup, and configuring the serial, parallel, USB or Ethernet port in the printer properties. It also explains how to print a test page to verify the installation and connection to the computer is working properly. Other settings like paper size, cash drawer functions, and enabling voice guidance for printing can be configured as well.

Uploaded by

Sadjiwo Bagio
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 21

80 Series Printer

Driver
Setup
Manual
I. Windows Driver Installation

Double click the installation icon ,


Then, it will show as below picture:

Select the language, then click “OK”.

Then, it will show as below picture:

Then click “Install”

1
Then, it will show as below picture:

Select the Printer Model and available computer port, such as "USB PORT
the picture, then, click “Install”.
1. 58mm Series: the drivers of 58 series
2. 80mm Series: the drivers of 80 series
3. Adding “Print Port”, if you need to select the corresponding IP port, but the default
menu which is drop-down from “Configure port” has no this configuration. At this
time, you can choose “Add Port” by “standard TCP / IP port” to configure their port.

And then, it will show as below picture:

2
Select “OK”, and then click “Exit”. Wait until it shows the below picture, it
means, the printer driver has been installed successfully.
Then click “Finish” to finish driver installation.

3
4
II. Printer Setup and Testing
2.1 Setup Printer Properties

Click Start Menu, and then click “Devices and Printers”, just as above picture

Right-Click “80 Printer” and then click “Printer properties”


And then, it will show as below picture:

5
On 80 Printer Properties “General”, you could configure the printer
communication port, such as Serial port, Parallel port and USB port. You also could
set the paper specification, beeper etc.
After all the setting, you could start to print the testing page.

2.2 Serial Port Configuration


On 80 Printer Properties “Ports”, you could configure the Serial Port to
communicate printer to computer, see the below picture:

6
Select available computer COM port, such as "COM1" as the above picture, and
then click "Configure Port" to set the detailed parameter.

7
"Bit per second" means Serial port baud rate, it must same as printer setting. For
example, if printer baud rate is "19200bsp", then you must select "19200" on "Bit per
second", just as above picture.（Factory default baud rate is 19200bps）
“Flow control”, we recommend select “Hardware”
After setting, click “Apply”, and then click “OK”.

2.3 Parallel Port Configuration


On 80 Printer Properties “Ports”, you could configure the Parallel Port to
communicate printer to computer, see the below picture:

8
Select available computer LPT port, such as the above picture shows “LPT1”,
then click “Apply” to finish the configuration.

2.4 USB Port Configuration


On 80 Printer Properties “Ports”, you could configure the USB Port to
communicate printer to computer, see the below picture:

9
Select available computer USB communication port, such as the above picture
shows “USB001”, and then click “Apply” to finish the configuration.

2.5 Ethernet Port Configuration


On 80 Printer Properties “Ports”, you could configure the Ethernet Port to
Communicate printer to computer, see the below picture:

10
Click “port” and then click the “Add port”, then shows as below picture:

Select” Standard TCP/IP Port”, and click” New Port…”, then shows as below
picture:

11
Then click “Next”.

Enter the IP address of the printer Ethernet port, Factory default IP is


“192.168.1.87”.

12
When it shows as below picture, select “Standard” and then click “Next”.

13
2.6 Printing Test Page
After finishing port configuration, we start to print test page.
On 80 Printer Properties “General”:

14
Click “Print Test Page”, the printer will print test page, which means the printer
has been connected with computer successfully and the port configuration is correct.

2.7 Other Properties and Function Configuration


You could set the paper specification etc., please refer to the follows:

15
16
Cash Drawer Setting：
No Cash Drawer: Cash Drawer is not connected.
Cash Drawer Before Printing: Open cash drawer before printing
Cash Drawer Before Printing: Open cash drawer after printing

17
18
Paper Size:
1、80 x 210 mm
2、80 x 297 mm
3、80 x 3276 mm

2.8 speech function


This feature only supports partial models.
1. Select the printer property and click "device Settings".

19
2. Click on the voice function, select the ringtone that needs to be set, and click apply.

3. Click on the routine, select the "print test page", and there will be voice broadcast
when printing.

20

You might also like