Model No.: N116Bge Suffix: L41: Product Specification

PRODUCT SPECIFICATION
Doc. Number:
□ Tentative Specification
□ Preliminary Specification
■ Approval Specification
MODEL NO.: N116BGE

SUFFIX: L41
Customer: Common Model
APPROVED BY SIGNATURE
www.jxlcd.com
www.jxlcd.com
Name / Title
Note
Please return 1 copy for your confirmation with your

signature and comments.
Approved By Checked By Prepared By

楊竣傑陳逸銘呂宜靜
2010-08-02 2010-08-02 2010-07-27
11:54:01 08:02:04 17:04:03
Version 3.0 3 August 2010 1 / 30

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
Free Datasheet http://www.Datasheet4U.com

CONTENTS
1. GENERAL DESCRIPTION .........................................................................................................4
1.1 OVERVIEW ................................................................................................................................ 4
1.2 GENERAL SPECIFICATI0NS ................................................................................................... 4
2. MECHANICAL SPECIFICATIONS ............................................................................................. 4
2.1 CONNECTOR TYPE .................................................................................................................. 5
3. ABSOLUTE MAXIMUM RATINGS ............................................................................................. 5
3.1 ABSOLUTE RATINGS OF ENVIRONMENT .......................................................................... 5
3.2 ELECTRICAL ABSOLUTE RATINGS...................................................................................... 6
3.2.1 TFT LCD MODULE ............................................................................................................6
4. ELECTRICAL SPECIFICATIONS............................................................................................... 6
4.1 FUNCTION BLOCK DIAGRAM............................................................................................... 6
4.2. INTERFACE CONNECTIONS ................................................................................................. 6
4.3 ELECTRICAL CHARACTERISTICS........................................................................................ 9
4.3.1 LCD ELETRONICS SPECIFICATION...............................................................................9
4.3.2 LED CONVERTER SPECIFICATION..............................................................................11
4.3.3 BACKLIGHT UNIT...........................................................................................................13
4.4 LVDS INPUT SIGNAL TIMING SPECIFICATIONS ............................................................. 14
www.jxlcd.com
www.jxlcd.com
4.4.1 LVDS DC SPECIFICATIONS ...........................................................................................14
4.4.2 LVDS DATA FORMAT ......................................................................................................14
4.4.3 COLOR DATA INPUT ASSIGNMENT ............................................................................15
4.5 DISPLAY TIMING SPECIFICATIONS ................................................................................... 16
4.6 POWER ON/OFF SEQUENCE ................................................................................................ 17
5. OPTICAL CHARACTERISTICS ............................................................................................... 18
5.1 TEST CONDITIONS................................................................................................................. 18
5.2 OPTICAL SPECIFICATIONS .................................................................................................. 18
6. RELIABILITY TEST ITEM ........................................................................................................ 21
7. PACKING.................................................................................................................................. 22
7.1 MODULE LABEL .................................................................................................................... 22
7.2 CARTON ................................................................................................................................... 23
7.3 PALLET..................................................................................................................................... 24
8. PRECAUTIONS ........................................................................................................................ 25
8.1 HANDLING PRECAUTIONS.................................................................................................. 25
8.2 STORAGE PRECAUTIONS .................................................................................................... 25
8.3 OPERATION PRECAUTIONS................................................................................................. 25
Appendix. EDID DATA STRUCTURE........................................................................................... 26
Appendix. OUTLINE DRAWING .................................................................................................. 29


REVISION HISTORY
Version Date Page Description
3.0 Jul.27, 2010 All Spec Ver.3.0 was first issued.
www.jxlcd.com
www.jxlcd.com


1. GENERAL DESCRIPTION
1.1 OVERVIEW
N116BGE-L41 is a 11.6” (11.6” diagonal) TFT Liquid Crystal Display module with LED Backlight
unit and 40 pins LVDS interface. This module supports 1366 x 768 HD mode and can display
262,144 colors. The optimum viewing angle is at 6 o’clock direction.
1.2 GENERAL SPECIFICATI0NS
Item Specification Unit Note
Screen Size 11.6 diagonal
Driver Element a-si TFT active matrix - -
Pixel Number 1366 x R.G.B. x 768 pixel -
Pixel Pitch 0.1875 (H) x 0.1875 (V) mm -
Pixel Arrangement RGB vertical stripe - -
Display Colors 262,144 color -
Transmissive Mode Normally white - -
Surface Treatment Hard coating (3H), Glare - -
Luminance, White 200(typ.) Cd/m2
Total 3.237 W (Max.) @ cell 1.089 W (Max.), BL 2.148 W
Power Consumption (1)
(Max.)
Note (1) The specified power consumption (with converter efficiency) is under the conditions at VCCS =
3.3 V, fv = 60 Hz, LED_VCCS = Typ, fPWM = 200 Hz, Duty=100% and Ta = 25 ± 2 ºC, whereas mosaic
pattern is displayed
www.jxlcd.com
www.jxlcd.com
2. MECHANICAL SPECIFICATIONS
Item
Horizontal (H)
Min. Typ. Max. Unit Note
277.5 278 278.5 mm
With Bracket
Horizontal (H)
267.5 268 268.5 mm
W/o Bracket
Module Size Vertical (V) (1)
167.3 168 168.7 mm
With PCB
Vertical (V)
158 157.5 157 mm
W/o PCB
Thickness (T) - 3.3 3.6 mm
Horizontal 258.825 259.125 259.425 mm
Bezel Area
Vertical 146.5 146.8 147.1 mm
Horizontal - 256.125 - mm
Active Area
Vertical - 144 - mm
Weight - 225 235 g
Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.


2.1 CONNECTOR TYPE

Pin40 Pin1
Please refer Appendix Outline Drawing for detail design.

Connector Part No.:IPEX 20455-040E-12,Tyco 5-2069716-3 , Starconn 111A40-000RA-G3 or equivalent
User’s connector Part No: IPEX-20453-040T-01 or equivalent
3. ABSOLUTE MAXIMUM RATINGS

3.1 ABSOLUTE RATINGS OF ENVIRONMENT
Value
Item Symbol Unit Note
Min. Max.
Storage Temperature TST -20 +60 ºC (1)
www.jxlcd.com
Operating Ambient Temperature TOP 0 +50 ºC (1), (2)
Note (1)
www.jxlcd.com
(a) 90 %RH Max. (Ta <= 40 ºC).
(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).
(c) No condensation.
Note (2) The temperature of panel surface should be 0 ºC min. and 60 ºC max.
Relative Humidity (%RH)
100
90
80
60
Operating
40
20
10 Storage Range
-40 -20 0 20 40 60 80
Temperature (ºC)


3.2 ELECTRICAL ABSOLUTE RATINGS

3.2.1 TFT LCD MODULE
Value
Item Symbol Unit Note
Min. Max.
Power Supply Voltage VCCS -0.3 +4.0 V
(1)
Logic Input Voltage VIN -0.3 VCCS+0.3 V
Converter Input Voltage LED_VCCS -0.3 25 V (1)
Converter Control Signal Voltage LED_PWM, -0.3 5 V (1)
Converter Control Signal Voltage LED_EN -0.3 5 V (1)
Note (1) Stresses beyond those listed in above “ELECTRICAL ABSOLUTE RATINGS” may cause
permanent damage to the device. Normal operation should be restricted to the conditions
described in “ELECTRICAL CHARACTERISTICS”.
4. ELECTRICAL SPECIFICATIONS
4.1 FUNCTION BLOCK DIAGRAM
SCAN DRIVER IC
LVDS Display TIMING ONTROLLER
Data & Clock
TFT LCD
PANEL
INPUT CONNECTOR
VCCS DC/DC CONVERTER &
GND
DataEDID
www.jxlcd.com
www.jxlcd.com
REFERENCE VOLTAGE
GENERATOR
DATA DRIVER IC
CLKEDID EDID
EEPROM
VEDID
Converter LED CONVERTER BACKLIGHT UNIT

Input Signals
4.2. INTERFACE CONNECTIONS

PIN ASSIGNMENT
Pin Symbol Description Remark
1 NC No Connection (Reserve)
2 VCCS Power Supply (3.3V typ.)
3 VCCS Power Supply (3.3V typ.)
4 VEDID DDC 3.3V power
5 NC No Connection (Reserved for CMI test)
6 CLKEDID DDC clock
7 DATAEDID DDC data
8 Rxin0- LVDS differential data input
R0-R5, G0
9 Rxin0+ LVDS differential data input


10 VSS Ground
11 Rxin1- LVDS differential data input
G1~G5, B0, B1
12 Rxin1+ LVDS differential data input
13 VSS Ground
14 Rxin2- LVDS Differential Data Input
B2-B5,HS,VS, DE
15 Rxin2+ LVDS Differential Data Input
16 VSS Ground
17 RxCLK- LVDS differential clock input
LVDS CLK
18 RxCLK+ LVDS differential clock input
19 NC No Connection (Reserved for CMI test)
22 VSS Ground
25 VSS Ground
28 VSS Ground
31 LED_GND LED Ground
www.jxlcd.com
32 LED_GND LED Ground
33
34
35
36
www.jxlcd.com
LED_GND
NC
LED_PWM
LED_EN
LED Ground
No Connection (Reserve for CMI test)
PWM Control Signal of LED Converter
Enable Control Signal of LED Converter
37 NC No Connection (Reserved for CMO test)
38 LED_VCCS LED Power Supply
Note (1) The first pixel is odd as shown in the following figure.


1,1 1,2 1,3 1,4 1,Xmax

(odd) (even) (odd) (even)
2,1 2,2
3,1
Pitch
Pitch
www.jxlcd.com
Ymax,
www.jxlcd.com
Ymax,1
Xmax


4.3 ELECTRICAL CHARACTERISTICS

4.3.1 LCD ELETRONICS SPECIFICATION
Value
Parameter Symbol Unit Note
Min. Typ. Max.
Power Supply Voltage VCCS 3.0 3.3 3.6 V -
Ripple Voltage VRP - 50 - mV -
Inrush Current IRUSH - - 1.5 A (2)
Mosaic - 250 330 mA (3)a
Power Supply Current lcc
Black - 300 390 mA (3)b
Note (1) The ambient temperature is Ta = 25 ± 2 ºC.
Note (2) IRUSH: the maximum current when VCCS is rising
IIS: the maximum current of the first 100ms after power-on
Measurement Conditions: Shown as the following figure. Test pattern: black.
+3.3V
Q1 2SK1475
VCCS
C3
FUSE (LCD Module Input)
R1 1uF
47K
(High to Low)
www.jxlcd.com
(Control Signal)
www.jxlcd.com
Q2
R2
SW 2SK1470
1K
+12V
47K C2
VR1
C1
0.01uF
1uF
VCCS rising time is 0.5ms


Note (3) The specified power supply current is under the conditions at VCCS = 3.3 V, Ta = 25 ± 2 ºC, DC
Current and fv = 60 Hz, whereas a power dissipation check pattern below is displayed.
a. Mosaic Pattern b. Black Pattern
Active Area Active Area
www.jxlcd.com
www.jxlcd.com
Version 3.0 3 August 2010 10 / 30


4.3.2 LED CONVERTER SPECIFICATION

Value
Min. Typ. Max.
Converter Input power supply voltage LED_Vccs 5 12.0 21.0 V
Converter Inrush Current ILEDRUSH - - 1.5 A (1)
Backlight On 3 - 3.6 V
EN Control Level
Backlight Off 0 - 0.5 V
PWM High Level 3 - 3.6 V

PWM Control Level
PWM Low Level 0 - 0.5 V
10 - 100 %
PWM Control Duty Ratio
5 - 100 % (2)
PWM Control Permissive Ripple Voltage VPWM_pp - - 100 mV
PWM Control Frequency fPWM 190 - 2K Hz (3)
LED Power Current LED_VCCS =Typ. ILED 118 151 179 mA (4)
www.jxlcd.com
www.jxlcd.com
Note (1) ILEDRUSH: the maximum current when LED_VCCS is rising,
ILEDIS: the maximum current of the first 100ms after power-on,
Measurement Conditions: Shown as the following figure. LED_VCCS = Typ, Ta = 25 ± 2 ºC, fPWM
= 200 Hz, Duty=100%.
LED_VCCS(Typ)
Q1 IRL3303
C3
FUSE (LED Converter Input)
R1 1uF
47K
(High to Low)
(Control Signal)
Q2
R2
SW=24V IRL3303
1K
LED_VCCS(Typ)
VR1 47K C2
C1
0.01uF
1uF
Version 3.0 3 August 2010 11 / 30


VLED rising time is 0.5ms
0.5ms
90%
LED_VCC 0V 10%
LED_PWM 0V
100ms
LED_EN 0V
ILEDIS
ILEDRush
ILED
Note (2) If the PWM control duty ratio is less than 10%, there is some possibility that acoustic noise or
www.jxlcd.com
www.jxlcd.com
backlight flash can be found. And it is also difficult to control the brightness linearity.
Note (3) If PWM control frequency is applied in the range less than 1KHz, the “waterfall” phenomenon on the
screen may be found. To avoid the issue, it’s a suggestion that PWM control frequency should follow
the criterion as below.
PWM control frequency fPWM should be in the range

( N + 0.33) ∗ f ≤ fPWM ≤ ( N + 0.66) ∗ f
N : Integer ( N ≥ 3)
f : Frame rate
Note (4) The specified LED power supply current is under the conditions at “LED_VCCS = Typ.”, Ta = 25
± 2 ºC, fPWM = 200 Hz, Duty=100%.
Version 3.0 3 August 2010 12 / 30


4.3.3 BACKLIGHT UNIT

Ta = 25 ± 2 ºC
Value
Min. Typ. Max.
LED Light Bar Power
VL 22.4 25.6 27.2 V
Supply Voltage
(1)(2)(Duty100%)
LED Light Bar Power
IL 57 60 63 mA
Supply Current
Power Consumption PL 1.28 1.54 1.72 W (3)
LED Life Time LBL 12000 - - Hrs (4)
Note (1) LED current is measured by utilizing a high frequency current meter as shown below :
VL, IL
LED
Light Bar
Light Bar Feedback
Channels
www.jxlcd.com
www.jxlcd.com
Note (2) For better LED light bar driving quality, it is recommended to utilize the adaptive boost converter
with current balancing function to drive LED light-bar.
Note (3) PL = IL ×VL (Without LED converter transfer efficiency)
Note (4) The lifetime of LED is defined as the time when it continues to operate under the conditions at Ta =
25 ±2 oC and IL = 20 mA(Per EA) until the brightness becomes ≦ 50% of its original value.
Version 3.0 3 August 2010 13 / 30


4.4 LVDS INPUT SIGNAL TIMING SPECIFICATIONS

4.4.1 LVDS DC SPECIFICATIONS
Value
Min. Typ. Max.
(1),
LVDS Differential Input High Threshold VTH(LVDS) - - +100 mV
VCM=1.2V
(1)
LVDS Differential Input Low Threshold VTL(LVDS) -100 - - mV
VCM=1.2V
LVDS Common Mode Voltage VCM 1.125 - 1.375 V (1)
LVDS Differential Input Voltage |VID| 100 - 600 mV (1)
LVDS Terminating Resistor RT - 100 - Ohm -
Note (1) The parameters of LVDS signals are defined as the following figures.
VCM |VID|
Single Ended
0V
www.jxlcd.com
www.jxlcd.com VTH(LVDS)
|VID|
Differential 0V
VTL(LVDS)
4.4.2 LVDS DATA FORMAT

CLK+
T/7
Rxin2 IN20 IN19 IN18 IN17 IN16 IN15 IN14
DE Vsync Hsync B5 B4 B3 B2
Rxin1 IN13 IN12 IN11 IN10 IN9 IN8 IN7
B1 B0 G5 G4 G3 G2 G1
Rxin0
IN6 IN5 IN4 IN3 IN2 IN1 IN0
G0 R5 R4 R3 R2 R1 R0
Signal for 1 DCLK Cycle (T)
Version 3.0 3 August 2010 14 / 30


4.4.3 COLOR DATA INPUT ASSIGNMENT

The brightness of each primary color (red, green and blue) is based on the 6-bit gray scale data input
for the color. The higher the binary input the brighter the color. The table below provides the assignment
of color versus data input.
Data Signal
Color Red Green Blue
R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0
Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Red 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0
Green 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0
Basic Blue 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1
Colors Cyan 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1
Magenta 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1
Yellow 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0
White 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Red(0)/Dark 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Red(1) 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0
Gray Red(2) 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0
Scale : : : : : : : : : : : : : : : : : : :
Of : : : : : : : : : : : : : : : : : : :
Red Red(61) 1 1 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0
Red(62) 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0
Red(63) 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0
Green(0)/Dark 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Green(1) 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0
Gray Green(2) 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0
Scale
Of
www.jxlcd.com
www.jxlcd.com
:
:
Green Green(61)
Green(62)
Green(63)
0
0
0
:
:
:
:
0
0
0
:
:
0
0
0
:
:
0
0
0
:
:
0
0
0
:
:
0
0
0
:
:
1
1
1
:
:
1
1
1
:
:
1
1
1
1
1
1
:
:
0
1
1
:
:
:
:
1
0
1
:
:
0
0
0
:
:
0
0
0
:
:
0
0
0
:
:
0
0
0
:
:
0
0
0
:
:
0
0
0
Blue(0)/Dark 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Blue(1) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
Gray Blue(2) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0
Scale : : : : : : : : : : : : : : : : : : :
Of : : : : : : : : : : : : : : : : : : :
Blue Blue(61) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 0 1
Blue(62) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0
Blue(63) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1
Note (1) 0: Low Level Voltage, 1: High Level Voltage
Version 3.0 3 August 2010 15 / 30


4.5 DISPLAY TIMING SPECIFICATIONS

The input signal timing specifications are shown as the following table and timing diagram.
Signal Item Symbol Min. Typ. Max. Unit Note
DCLK Frequency 1/Tc 62.4 69.3 72.8 MHz -
Vertical Total Time TV 772 784 788 TH -
Vertical Active Display Period TVD 768 768 768 TH -
Vertical Active Blanking Period TVB TV-TVD 16 TV-TVD TH -
DE
Horizontal Total Time TH 1408 1474 1501 Tc -
Horizontal Active Display Period THD 1366 1366 1366 Tc -
Horizontal Active Blanking Period THB TH-THD 108 TH-THD Tc -
Note (1) Because this module is operated by DE only mode, Hsync and Vsync are ignored.
INPUT SIGNAL TIMING DIAGRAM
Tv
TVD
DE
DCLK
www.jxlcd.com
www.jxlcd.com TC
TH
THD
DE
DATA
Version 3.0 3 August 2010 16 / 30


4.6 POWER ON/OFF SEQUENCE

The power sequence specifications are shown as the following table and diagram.
Value
Symbol Unit Note
Min. Typ. Max.
t1 0.5 - 10 ms
t2 0 - 50 ms
t3 0 - 50 ms
t4 500 - - ms
t5 200 - - ms
t6 200 - - ms
t7 0.5 - 10 ms
tA 0.5 - 10 ms
tB 0 10 ms
tC 10 - - ms
tD 10 - - ms
tE 10 - - ms
tF 10 - - ms
Power On Power Off

t7
90% 90%
- Power Supply 10% 10%

10%
for LCD, VCCS 0V
t1
www.jxlcd.com
t4
www.jxlcd.com
- Interface Signal
(LVDS Signal of
Transmitter), VI
0V
t2
t5
Valid Data
t6
t3
90% 90%
- Power Supply for

10% 10%
LED Converter, 0V
tA tB
LED_VCCS
tC tD
- LED Converter PWM Signal

Dimming Signal, 0V
LED_PWM
tE tF
- LED Converter
Enable Signal, 0V
LED_EN
Note (1) Please don’t plug the interface cable when system is turned on.
Note (2) Please avoid floating state of the interface signal during signal invalid period.
Note (3) It is recommended that the backlight power must be turned on after the power supply for LCD and the
interface signal is valid.
Version 3.0 3 August 2010 17 / 30


5. OPTICAL CHARACTERISTICS
5.1 TEST CONDITIONS
Item Symbol Value Unit
o
Ambient Temperature Ta 25±2 C
Ambient Humidity Ha 50±10 %RH
Supply Voltage VCC 3.3 V
Input Signal According to typical value in "3. ELECTRICAL CHARACTERISTICS"
LED Light Bar Input Current IL 60 mA
The measurement methods of optical characteristics are shown in Section 5.2. The following items
should be measured under the test conditions described in Section 5.1 and stable environment shown in
Note (5).
5.2 OPTICAL SPECIFICATIONS

Item Symbol Condition Min. Typ. Max. Unit Note
Contrast Ratio CR 300 500 - - (2), (5)
TR - 3 8 ms
Response Time (3)
TF - 7 12 ms
Average Luminance of White LAVE 170 200 - cd/m2 (4), (6)
Rx 0.573 -
Red
Ry θx=0°, θY =0° 0.358 -
Gx Viewing Normal Angle 0.339 -
Green
Color Gy Typ – 0.568 Typ + -
www.jxlcd.com
(1)
www.jxlcd.com
Chromaticity Bx 0.03 0.153 0.03 -
Blue
By 0.124 -
Wx 0.313 -
White
Wy 0.329 -
θx+ 40 45
Horizontal
θx- 40 45 -
Viewing Angle CR≥10 Deg. (1),(5)
θY+ 15 20 -
Vertical
θY- 40 45 -
White Variation of 5 Points δW5p θx=0°, θY =0° 80 - - % (5),(6)
Version 3.0 3 August 2010 18 / 30


Note (1) Definition of Viewing Angle (θx, θy):

Normal
θx = θy = 0º
θy- θy+
θX- = 90º x- 12 o’clock direction

y+
θx− θy+ = 90º
θx+
6 o’clock
y- x+ θX+ = 90º
θy- = 90º
Note (2) Definition of Contrast Ratio (CR):
The contrast ratio can be calculated by the following expression.
Contrast Ratio (CR) = L63 / L0
L63: Luminance of gray level 63
L 0: Luminance of gray level 0
www.jxlcd.com
www.jxlcd.com
CR = CR (1)
CR (X) is corresponding to the Contrast Ratio of the point X at Figure in Note (6).
Note (3) Definition of Response Time (TR, TF):
Gray Level 63 Gray Level 63

100%
90%
Optical
Response
Gray Level 0
10%
0%
Time
TR TF
66.67 ms 66.67 ms
Note (4) Definition of Average Luminance of White (LAVE):

Measure the luminance of gray level 63 at 5 points
LAVE = [L (1)+ L (2)+ L (3)+ L (4)+ L (5)] / 5
L (x) is corresponding to the luminance of the point X at Figure in Note (6)
Version 3.0 3 August 2010 19 / 30


Note (5) Measurement Setup:

The LCD module should be stabilized at given temperature for 20 minutes to avoid abrupt
temperature change during measuring. In order to stabilize the luminance, the measurement
should be executed after lighting Backlight for 20 minutes in a windless room.
LCD Module
LCD Panel
USB2000 or equivalent CS-2000T or equivalent
Center of the Screen

Light Shield Room
500 mm
(Ambient Luminance < 2 lux)
Note (6) Definition of White Variation (δW):
www.jxlcd.com
www.jxlcd.com
Measure the luminance of gray level 63 at 5 points
δW5p = {Minimum [L (1)~ L (5)] / Maximum [L (1)~L (5)]}*100%
10mm
6 7 8
H/4
2 3
X : Test Point
H/4
X=1 to 13
9 1 10
H
H/4
4 5
H/4
11 12 13
10mm 10mm
10mm
W/4 W/4 W/4 W/4

W
Active area
Note (7) The listed optical specifications refer to the initial value of manufacture, but the condition of
the specifications after long-term operation will not be warranted.
Version 3.0 3 August 2010 20 / 30


6. RELIABILITY TEST ITEM
Test Item Test Condition Note

High Temperature Storage Test 60ºC, 240 hours
Low Temperature Storage Test -20ºC, 240 hours
Thermal Shock Storage Test -20ºC, 0.5hour←→60℃, 0.5hour; 100cycles, 1hour/cycle
High Temperature Operation Test 50ºC, 240 hours (1) (2)
Low Temperature Operation Test 0ºC, 240 hours
High Temperature & High Humidity

50ºC, RH 80%, 240hours
Operation Test
150pF, 330Ω, 1sec/cycle

ESD Test (Operation) Condition 1 : Contact Discharge, ±8KV (1)
Condition 2 : Air Discharge, ±15KV
220G, 2ms, half sine wave,1 time for each direction of

Shock (Non-Operating) (1)(3)
±X,±Y,±Z
1.5G / 10-500 Hz, Sine wave, 30 min/cycle, 1cycle for each

Vibration (Non-Operating) (1)(3)
X, Y, Z
Note (1) criteria : Normal display image with no obvious non-uniformity and no line defect.
www.jxlcd.com
www.jxlcd.com
Note (2) Evaluation should be tested after storage at room temperature for more than two hour
Note (3) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough
so that the module would not be twisted or bent by the fixture.
Version 3.0 3 August 2010 21 / 30


7. PACKING
7.1 MODULE LABEL
The barcode nameplate is pasted on each module as illustration, and its definitions are as following explanation.
N116BGE –L41 Rev. XX

xxxx
(a) Model Name: N116BGE - L41

(b) Revision: Rev. XX, for example: C1, C2 …etc.
(c) Serial ID: X X X X X X X Y M D L N N N N
Serial No.
Product Line
Year, Month, Date
CMO Internal Use
www.jxlcd.com
www.jxlcd.com Revision
CMO Internal Use
Serial ID includes the information as below:

(a) Manufactured Date: Year: 0~9, for 2010~2019
Month: 1~9, A~C, for Jan. ~ Dec.
Day: 1~9, A~Y, for 1st to 31st, exclude I , O and U
(b) Revision Code: cover all the change
(c) Serial No.: Manufacturing sequence of product
(d) Product Line: 1 -> Line1, 2 -> Line 2, …etc.
Version 3.0 3 August 2010 22 / 30


7.2 CARTON
www.jxlcd.com
www.jxlcd.com
Figure. 7-2 Packing
Version 3.0 3 August 2010 23 / 30


7.3 PALLET
www.jxlcd.com
www.jxlcd.com
Figure. 7-3 Packing
Version 3.0 3 August 2010 24 / 30


8. PRECAUTIONS
8.1 HANDLING PRECAUTIONS
(1) The module should be assembled into the system firmly by using every mounting hole. Be careful
not to twist or bend the module.
(2) While assembling or installing modules, it can only be in the clean area. The dust and oil may cause
electrical short or damage the polarizer.
(3) Use fingerstalls or soft gloves in order to keep display clean during the incoming inspection and
assembly process.
(4) Do not press or scratch the surface harder than a HB pencil lead on the panel because the polarizer
is very soft and easily scratched.
(5) If the surface of the polarizer is dirty, please clean it by some absorbent cotton or soft cloth. Do not
use Ketone type materials (ex. Acetone), Ethyl alcohol, Toluene, Ethyl acid or Methyl chloride. It
might permanently damage the polarizer due to chemical reaction.
(6) Wipe off water droplets or oil immediately. Staining and discoloration may occur if they left on panel
for a long time.
(7) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In
case of contacting with hands, legs or clothes, it must be washed away thoroughly with soap.
(8) Protect the module from static electricity, it may cause damage to the C-MOS Gate Array IC.
www.jxlcd.com
www.jxlcd.com
(9) Do not disassemble the module.
(10) Do not pull or fold the LED wire.
(11) Pins of I/F connector should not be touched directly with bare hands.
8.2 STORAGE PRECAUTIONS

(1) High temperature or humidity may reduce the performance of module. Please store LCD module
within the specified storage conditions.
(2) It is dangerous that moisture come into or contacted the LCD module, because the moisture may
damage LCD module when it is operating.
(3) It may reduce the display quality if the ambient temperature is lower than 10 ºC. For example, the
response time will become slowly, and the starting voltage of LED will be higher than the room
temperature.
8.3 OPERATION PRECAUTIONS

(1) Do not pull the I/F connector in or out while the module is operating.
(2) Always follow the correct power on/off sequence when LCD module is connecting and operating.
This can prevent the CMOS LSI chips from damage during latch-up.
(3) The startup voltage of Backlight is approximately 1000 Volts. It may cause electrical shock while
assembling with converter. Do not disassemble the module or insert anything into the Backlight unit.
Version 3.0 3 August 2010 25 / 30


Appendix. EDID DATA STRUCTURE

The EDID (Extended Display Identification Data) data formats are to support displays as defined in the
VESA Plug & Display and FPDI standards.
Byte # Byte # Value Value

Field Name and Comments
(decimal) (hex) (hex) (binary)
0 0 Header 00 00000000
1 1 Header FF 11111111
2 2 Header FF 11111111
3 3 Header FF 11111111
4 4 Header FF 11111111
5 5 Header FF 11111111
6 6 Header FF 11111111
7 7 Header 00 00000000
8 8 EISA ID manufacturer name (“CMO”) 0D 00001101
9 9 EISA ID manufacturer name (Compressed ASCII) AF 10101111
10 0A ID product code (N116BGE-L41) 13 00010011
11 0B ID product code (hex LSB first; N116BGE-L41) 11 00010001
12 0C ID S/N (fixed “0”) 00 00000000
13 0D ID S/N (fixed “0”) 00 00000000
14 0E ID S/N (fixed “0”) 00 00000000
15 0F ID S/N (fixed “0”) 00 00000000
16
17
18
19
www.jxlcd.com
www.jxlcd.com
10
11
12
13
Week of manufacture (fixed week code)
Year of manufacture (fixed year code)
EDID structure version # (“1”)
EDID revision # (“3”)
09
13
01
03
00001001
00010011
00000001
00000011
20 14 Video I/P definition (“digital”) 80 10000000
21 15 Max H image size (“25.612cm”) 1A 00011010
22 16 Max V image size (“14.4cm”) 0E 00001110
23 17 Display Gamma (Gamma = ”2.2”) 78 01111000
24 18 Feature support (“Active off, RGB Color”) 0A 00001010
25 19 Rx1, Rx0, Ry1, Ry0, Gx1, Gx0, Gy1, Gy0 FE 11111110
26 1A Bx1, Bx0, By1, By0, Wx1, Wx0, Wy1, Wy0 75 01110101
27 1B Rx=0.573 92 10010010
28 1C Ry=0.358 5B 01011011
29 1D Gx=0.339 56 01010110
30 1E Gy=0.568 91 10010001
31 1F Bx=0.153 27 00100111
32 20 By=0.124 1F 00011111
33 21 Wx=0.313 50 01010000
34 22 Wy=0.329 54 01010100
35 23 Established timings 1 00 00000000
36 24 Established timings 2 00 00000000
37 25 Manufacturer’s reserved timings 00 00000000
38 26 Standard timing ID # 1 01 00000001
Version 3.0 3 August 2010 26 / 30



42 2A Standard timing ID # 3 01 00000001
43 2B Standard timing ID # 3 01 00000001
44 2C Standard timing ID # 4 01 00000001
45 2D Standard timing ID # 4 01 00000001
46 2E Standard timing ID # 5 01 00000001
47 2F Standard timing ID # 5 01 00000001
Detailed timing description # 1 Pixel clock (“69.3MHz”, According to
54 36 12 00010010
VESA CVT Rev1.1)
55 37 # 1 Pixel clock (hex LSB first) 1B 00011011
56 38 # 1 H active (“1366”) 56 01010110
57 39 # 1 H blank (“108”) 6C 01101100
58 3A # 1 H active : H blank (“1366 : 108”) 50 01010000
59 3B # 1 V active (”768”) 00 00000000
60 3C # 1 V blank (”16”) 10 00010000
www.jxlcd.com
61 3D # 1 V active : V blank (”768 :16”) 30 00110000
62
63
64
65
www.jxlcd.com
3E
3F
40
41
# 1 H sync offset (”32”)
# 1 H sync pulse width ("22”)
# 1 V sync offset : V sync pulse width (”2 : 4”)
# 1 H sync offset : H sync pulse width : V sync offset : V sync width
20
16
24
00
00100000
00010110
00100100
00000000
(”32: 22 : 2 : 4”)
66 42 # 1 H image size (”256 mm”) 00 00000000
67 43 # 1 V image size (”144 mm”) 90 10010000
68 44 # 1 H image size : V image size (”256 : 144”) 10 00010000
69 45 # 1 H boarder (”0”) 00 00000000
70 46 # 1 V boarder (”0”) 00 00000000
# 1 Non-interlaced, Normal, no stereo, Separate sync, H/V pol
71 47 18 00011000
Negatives
72 48 Detailed timing description # 2 00 00000000
73 49 # 2 Flag 00 00000000
74 4A # 2 Reserved 00 00000000
# 2 FE (hex) defines ASCII string (Model Name “N116BGE-L41”,
75 4B FE 11111110
ASCII)
76 4C # 2 Flag 00 00000000
77 4D # 2 1st character of name (“N”) 4E 01001110
78 4E # 2 2nd character of name (“1”) 31 00110001
79 4F # 2 3rd character of name (“1”) 31 00110001
80 50 # 2 4th character of name (“6”) 36 00110110
81 51 # 2 5th character of name (“B”) 42 01000010
82 52 # 2 6th character of name (“G”) 47 01000111
83 53 # 2 7th character of name (“E”) 45 01000101
Version 3.0 3 August 2010 27 / 30



84 54 # 2 8th character of name (“-”) 2D 00101101
85 55 # 2 9th character of name (“L”) 4C 01001100
87 57 # 2 Ath character of name (“1”) 31 00110001
88 58 # 2 New line character indicates end of ASCII string 0A 00001010
89 59 # 2 Padding with “Blank” character 20 00100000
90 5A Detailed timing description # 3 00 00000000
91 5B # 3 Flag 00 00000000
92 5C # 3 Reserved 00 00000000
93 5D # 3 FE (hex) defines ASCII string (Vendor “CMO”, ASCII) FE 11111110
94 5E # 3 Flag 00 00000000
95 5F # 3 1st character of string (“C”) 43 01000011
96 60 # 3 2nd character of string (“M”) 4D 01001101
97 61 # 3 3rd character of string (“O”) 4F 01001111
98 62 # 3 New line character indicates end of ASCII string 0A 00001010
105
106
107
108
www.jxlcd.com
www.jxlcd.com
69
6A
6B
6C
# 3 Padding with “Blank” character
Detailed timing description # 4
20
20
20
00
00100000
00100000
00100000
00000000
109 6D # 4 Flag 00 00000000
110 6E # 4 Reserved 00 00000000
# 4 FE (hex) defines ASCII string (Model Name“N116BGE-L41”,
111 6F FE 11111110
ASCII)
112 70 # 4 Flag 00 00000000
113 71 # 4 1st character of name (“N”) 4E 01001110
114 72 # 4 2nd character of name (“1”) 31 00110001
115 73 # 4 3rd character of name (“1”) 31 00110001
117 75 # 4 5th character of name (“B”) 42 01000010
118 76 # 4 6th character of name (“G”) 47 01000111
119 77 # 4 7th character of name (“E”) 45 01000101
120 78 # 4 8th character of name (“-”) 2D 00101101
121 79 # 4 9th character of name (“L”) 4C 01001100
122 7A # 4 9th character of name (“4”) 34 00110100
123 7B # 4 Ath character of name (“1”) 31 00110001
124 7C # 4 New line character indicates end of ASCII string 0A 00001010
125 7D # 4 Padding with “Blank” character 20 00100000
126 7E Extension flag 00 00000000
127 7F Checksum 8F 10001111
Version 3.0 3 August 2010 28 / 30


Appendix. OUTLINE DRAWING
www.jxlcd.com
www.jxlcd.com
Version 3.0 3 August 2010 29 / 30


www.jxlcd.com
www.jxlcd.com
Version 3.0 3 August 2010 30 / 30


Model No.: N116Bge Suffix: L41: Product Specification

Uploaded by

Copyright:

Available Formats

Model No.: N116Bge Suffix: L41: Product Specification

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Model No.: N116Bge Suffix: L41: Product Specification

Uploaded by

Copyright:

Available Formats

PRODUCT SPECIFICATION

MODEL NO.: N116BGE

Customer: Common Model

Please return 1 copy for your confirmation with your

Approved By Checked By Prepared By

Version 3.0 3 August 2010 1 / 30

Free Datasheet http://www.Datasheet4U.com

Version 3.0 3 August 2010 2 / 30

Free Datasheet http://www.Datasheet4U.com

Version Date Page Description

3.0 Jul.27, 2010 All Spec Ver.3.0 was first issued.

Version 3.0 3 August 2010 3 / 30

Free Datasheet http://www.Datasheet4U.com

Version 3.0 3 August 2010 4 / 30

Free Datasheet http://www.Datasheet4U.com

2.1 CONNECTOR TYPE

Please refer Appendix Outline Drawing for detail design.

3. ABSOLUTE MAXIMUM RATINGS

Relative Humidity (%RH)

Version 3.0 3 August 2010 5 / 30

Free Datasheet http://www.Datasheet4U.com

3.2 ELECTRICAL ABSOLUTE RATINGS

VCCS DC/DC CONVERTER &

Converter LED CONVERTER BACKLIGHT UNIT

4.2. INTERFACE CONNECTIONS

Version 3.0 3 August 2010 6 / 30

Free Datasheet http://www.Datasheet4U.com

Version 3.0 3 August 2010 7 / 30

Free Datasheet http://www.Datasheet4U.com

1,1 1,2 1,3 1,4 1,Xmax

Version 3.0 3 August 2010 8 / 30

Free Datasheet http://www.Datasheet4U.com

4.3 ELECTRICAL CHARACTERISTICS

VCCS rising time is 0.5ms

Version 3.0 3 August 2010 9 / 30

Free Datasheet http://www.Datasheet4U.com

a. Mosaic Pattern b. Black Pattern

Active Area Active Area

Version 3.0 3 August 2010 10 / 30

Free Datasheet http://www.Datasheet4U.com

4.3.2 LED CONVERTER SPECIFICATION

Converter Input power supply voltage LED_Vccs 5 12.0 21.0 V

Converter Inrush Current ILEDRUSH - - 1.5 A (1)

PWM High Level 3 - 3.6 V

PWM Control Permissive Ripple Voltage VPWM_pp - - 100 mV

PWM Control Frequency fPWM 190 - 2K Hz (3)

Version 3.0 3 August 2010 11 / 30

Free Datasheet http://www.Datasheet4U.com

VLED rising time is 0.5ms

PWM control frequency fPWM should be in the range

Version 3.0 3 August 2010 12 / 30

Free Datasheet http://www.Datasheet4U.com

4.3.3 BACKLIGHT UNIT

Version 3.0 3 August 2010 13 / 30

Free Datasheet http://www.Datasheet4U.com

4.4 LVDS INPUT SIGNAL TIMING SPECIFICATIONS

LVDS Differential Input Voltage |VID| 100 - 600 mV (1)

LVDS Terminating Resistor RT - 100 - Ohm -

4.4.2 LVDS DATA FORMAT