ELYSIAN Series User Manual 90916
ELYSIAN Series User Manual 90916
ELYSIAN Series User Manual 90916
User Manual
ELYSIAN 2 ELYSIAN 4
ELYSIAN Series
Revealing the Passion and Excitement of the Musical Performance
Founded in 1932, Wharfedale’s founder, Gilbert Briggs, had one goal in mind –
to bring music into the home by designing loudspeakers
that conveyed the impact, thrill and emotion of performance
in an entirely natural and realistic way.
Thus he created the first true hi-fi experience for connoisseurs of music in the home
and continued to introduce technology that would enhance the listening experience –
like the commercial crossover, foam surrounds and the slot port system.
If you are sitting within 2m of the speakers, the distance between the speakers should be the same as between you
and the speakers .
Otherwise site the speakers between 1.5 to 2 metres apart, clear of rear walls and room corners.
If the loudspeakers are placed too close to the walls the bass will increase but may be boomy and indistinct. If the
loudspeakers are placed further away from the walls, the inward angle ("toe in") may be increased by up to 30%. As
personal taste and room acoustics play a large role, experiment with different configurations and play a wide range
of programme material before finalising the position of your speakers.
The optimum listening position is in an area between the speakers broadly known as the "sweet spot" . The more
extreme the angle of toe-in the narrower the sweet spot. Wharfedale loudspeakers are designed to cover a wide
sonic perspective so there should be no need for extreme settings. A mild angle inwards will cover a wide range of
seating positions.
The grilles are provided to protect the loudspeaker drive units from accidental damage. For critical listening, please
remove the grilles.
Connect the black, negative (-) terminals similarly. Tighten the terminal securely. Repeat this procedure for the Right
Channel. If you are standard wiring make sure the terminal links are securely in place.
RIGHT LEFT
SPEAKER SPEAKER
AMPLIFIER
R.SPKR L.SPKR
Looking After Your Loudspeaker
Your Wharfedale loudspeakers use a specially hardwearing sealed finish. They should not be waxed or treated
with spray polishes which will smear and dim their lustrous finish. Occasionally polish them with a dry or barely
moist cloth to remove dust and finger marks, etc.
Occasionally, remove the loudspeaker grilles and brush them gently with a soft brush before replacing them carefully.
Never stand objects on your loudspeakers. In particular do not stand flowers, etc. on them – they are not jardinieres!
Avoid getting any liquid behind the grille. If you accidentally spill liquid on your loudspeakers, take them to your
dealer for attention before using them again.
Do not open the speakers; there are no user serviceable parts inside. Never touch the driver units either with an
object or your hands.
Specifications
ELYSIAN 2 ELYSIAN 4
General Description 3-way standmount speaker 3-way floorstanding speaker
Enclosure Type bass reflex bass reflex
Transducer Complement 3-way 3-way
Bass Driver 8.5" (220mm) coated fibre glass matrix cone 8.5" (220mm) coated fibre glass matrix cone x 2
Midrange Driver 6" (150mm) coated fibre glass matrix cone 6" (150mm) coated fibre glass matrix cone
Treble Driver 27 x 90mm AMT 27 x 90mm AMT
AV Shield No No
Sensitivity (2.83V @ 1m) 89dB 92dB
Recommended Amplifier Power 25-250W 15-250W
Peak SPL 109dB 110dB
Nominal Impedance 4Ω (compatible 8Ω ) 4Ω (compatible 8Ω )
Minimum Impedance 3.6Ω 3.2Ω
Frequency Response (+/-3dB) 35Hz ~ 22kHz 30Hz ~ 22kHz
Bass Extension (-6dB) 28Hz 24Hz
Crossover Frequency 360Hz, 2.9kHz 340Hz, 3 .1kHz
Cabinet Volume (in litres) 17.5L, 43.6L 38L, 79.4L
Dimensions (mm)
Height (on plinth) 700mm 1188mm
Width (on plinth) 334mm 402mm
Depth (with terminals) (432+30)mm (432+30)mm
Carton Size 580 x 460 x 830mm 1285 x 595 x 480
Net Weight 30.5kg/pcs 49.5kg/pcs
Gross Weight 35.3kg/ctn 55.8kg/ctn
ELYSIAN Stands
Materials:
Columns High carbon steel tube
Top Plate High carbon steel
Base Plate MDF piano finish
Base Spikes Hardened high carbon steel
Dimensions (mm):
Height (on plinth) 428mm
Width 402mm
Depth (with badge) 435mm
Service Address
For technical support, servicing or product queries and information please contact your local retailer or the office below.
UK
IAG House, 13/14 Glebe Road, Huntingdon, Cambridgeshire, PE29 7DL, UK
Tel: +44(0)1480 452561