Scribd Logo
Upload

Welcome to Scribd!

  • 43 views

    Electromagnetic Locks Checklist: Requirements For All Installations

    Uploaded by

    h
    This document is a checklist for compliance with electromagnetic lock installation requirements. It contains sections for general requirements that all installations must meet, additional requirements for locks in patient safety areas, and electrical code requirements. Installers must verify that locks release during fire alarms and power failures, are reset with a single manual switch, and can be unlocked manually at the door within 15 seconds. Information on the project, installer, and lock locations is collected at the top.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Electromagnetic Locks Checklist: Requirements For All Installations

    Uploaded by

    h
    43 views2 pages
    This document is a checklist for compliance with electromagnetic lock installation requirements. It contains sections for general requirements that all installations must meet, additional requirements for locks in patient safety areas, and electrical code requirements. Installers must verify that locks release during fire alarms and power failures, are reset with a single manual switch, and can be unlocked manually at the door within 15 seconds. Information on the project, installer, and lock locations is collected at the top.

    Original Title

    ElectromagChecklist

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document is a checklist for compliance with electromagnetic lock installation requirements. It contains sections for general requirements that all installations must meet, additional requirements for locks in patient safety areas, and electrical code requirements. Installers must verify that locks release during fire alarms and power failures, are reset with a single manual switch, and can be unlocked manually at the door within 15 seconds. Information on the project, installer, and lock locations is collected at the top.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    43 views2 pages

    Electromagnetic Locks Checklist: Requirements For All Installations

    Uploaded by

    h
    This document is a checklist for compliance with electromagnetic lock installation requirements. It contains sections for general requirements that all installations must meet, additional requirements for locks in patient safety areas, and electrical code requirements. Installers must verify that locks release during fire alarms and power failures, are reset with a single manual switch, and can be unlocked manually at the door within 15 seconds. Information on the project, installer, and lock locations is collected at the top.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    ELECTROMAGNETIC LOCKS CHECKLIST

    For compliance with Sentence 3.4.6.16.(4) of the MBC

    Project Address: ______________________________________ Building Permit #: ______________

    Completed by: _________________________________ Company: _________________________


    Phone: __________________________
    Qty. of Mag. Lock Locations for this Project: _______

    1. Requirements For All Installations (except portions of Group B2 Occupancies where


    unrestricted egress may compromise patient safety)
    Electromagnetic locks are not installed on doors leading from F1 occupancy, 3.4.6.16.(4).

    Building is equipped with a fire alarm system, 3.4.6.16.(4)(a) .............................................

    Electromagnetic locks release on fire alarm signal, 3.4.6.16.(4)(b) ......................................

    Electromagnetic locks release on power failure to locking mechanisms, 3.4.6.16.(4)(c) .....

    A single manual switch is provided to release all locks in the building, 3.4.6.16.(4)(d) ......

    Specify location ________________________________________________________

    Switch is existing or new*

    Switch is accessible only to authorized persons ................................................

    A single manual switch is provided to reset all electromagnetic locks in the building,
    3.4.6.16.(4)(f) ........................................................................................................................

    When released on emergency condition, electromagnetic locks are reset by the manual
    switch only (not automatic), 3.4.6.16.(4)(f) ..........................................................................

    Local Lock Release – Hardware Release (time delay):

    Door releases within 15 seconds of 90 N of pressure being applied to the opening


    hardware, 3.4.6.16.(4)(e) ................................................................................................

    Upon initiation, opening process is irreversible; constant pressure on the opening


    hardware is not required, 3.4.6.16.(4)(e) ........................................................................

    Door does not re-lock until opened, 3.4.6.16.(4)(e) .......................................................

    Sign posted on door indicating that the door will open within 15 seconds,
    3.4.6.16.(4)(g) .................................................................................................................
    *
    If a new switch is to be provided in an existing building, confirm that all existing electromagnetic locks in the
    building will be controlled by it.

    1-Apr-2011
    -2-

    2. Requirements for portions of Group B2 Occupancies where unrestricted egress may


    compromise patient safety
    Building is equipped with a fire alarm system, 3.4.6.16.(4)(a) .............................................

    Electromagnetic locks release on a fire alarm signal, 3.4.6.16.(4)(b) ...................................

    Electromagnetic locks release on power failure to locking mechanisms, 3.4.6.16.(4)(c) .....

    Single manual switch is provided to release all locks, 3.4.6.16.(4)(d) ..................................

    Specify location _______________________________________________________

    Switch is existing or new*

    Switch is accessible only to authorized persons .....................................

    3. Electrical Code Requirements

    Wiring methods suitable for Class 1 circuit (Rule 16-010)...................................................

    Conductors extending from the fire alarm system comply with Rule 32-102 ......................

    4. Fire Alarm System Verification (to be completed by inspector upon receipt of VI report)

    Connections to fire alarm system verified.............................................................................

    Release on signal from fire alarm system verified ................................................................

    *
    If a new switch is to be provided in an existing building, confirm that all existing electromagnetic locks in the
    building will be controlled by it.

    Personal information is collected under the authority of The City of Winnipeg Charter Act, and is used for the administration and enforcement of The City of Winnipeg
    Building By-law No. 4555/87. This information will be disclosed publicly in accordance with the disclosure provisions of the Province of Manitoba - Freedom of
    Information and Protection of Privacy Act. If you have questions about the collection, use, or disclosure of your information, contact the Corporate FIPPA Coordinator:
    by mail to the City Clerk’s Department, Administration Building, 510 Main Street, Winnipeg, MB, R3B 1B9; by telephone to 311; or by email to [email protected].

    Fax completed form to Electrical Plan Examination at 986-3045 1-Apr-2011

    You might also like