Test 1: Css Tle 9 Summative Assessment (September)

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 5

Name: ______________________________________________________________ Score:

Grade/Section: _____________________ LRN: ___________________________ Brgy: ____________

CSS TLE 9 SUMMATIVE ASSESSMENT (September)

Test 1
Direction. Write TRUE if the statement is correct otherwise write FALSE if the statement is
incorrect. Write your answer on the space provided.

_____________1. Computer equipment can be dangerous to you and others, it can injure or even kill you if you do not
follow proper safety guidelines when working along with PC’s.
_____________2. Before touching anything inside your computer. Touch a painted metal surface on the chassis, such as the
metal around the card-slot openings at the back of your computer can not discharge static energy.
_____________ 3. When you are working inside any computer- related equipment, it is necessary to remove all jewelry to
prevent electric shocked.
____________ 4. You do not need to use brush, compressed air, or blower in cleaning the computer system.
_____________5. Wearing shoes with conductive rubber soles to help reduce the chance of being shocked or seriously
injured in an electrical accident.

Test 2. 2 points each.


Test 3.
Direction. Read the statement carefully, choose the right answer and write the
correct letter on the space provided.
1. John is measuring a voltage of a power supply, what tool should he used to measure the voltage?
a. Soldering Pencil b. Desoldering tool c. Thermal paste d. Multimeter
2. Anton is cleaning a motherboard, what appropriate tool he needs to use?
a. Lens Cleaner b. Magnifier c. Paint Brush d. Goggles
3. What tool is used to unsolder unwanted parts or component in the circuit with the support of
soldering pencil is called __________________.
a. Soldering Pencil b. Desoldering tool c. Thermal Paste d. Pliers
4. Jim is cutting wires to use for network cabling, what proper tool used for cutting or trimming of
connecting wires or terminal leads in the circuit board
a. Pliers b. Soldering pencil c. Side cutter pliers d. Long nose pliers
5. Which tool you need to used when you fasten a negative slotted screw?
a. Flat Screw Driver b. Philips Screw Driver c. Tweezer d. Plier
6. What Protective tool will you use when you are cleaning dust?
a. Gloves b. Anti-static wrist strap c. Goggles d. Paint Brush
7. When you removing component of a computer, what tool should you use
to hold the small parts?
a. Pliers b. Tweezer c. Side Cutter d. Long nose plier
8. Nico has problem seeing small objects, what appropriate tool should heused?
a. Flashlight b. Goggles c. Tweezer d. Magnifier
9. When you seating back the processor, what material you used to dissipate the heat of processor.
a. Lens Cleaner b. Spray c. Thermal Paste d. Soldering pencil
10. What is the appropriate tool used to eliminate the static charge when holding computer parts?
a. Anti-static Mat b. Anti-static Wrist strap c. Goggles d. Gloves

Prepared by: MELITO D. GALIZA JR.

Approved: FERDINAND V. CUARESMA PhD.


Principal III
Name: ______________________________________________________________ Score:
Grade/Section: _____________________ LRN: ___________________________ Brgy: ____________

CSS TLE 9 SUMMATIVE ASSESSMENT (October)

TEST 1. Direction. Fill in the blanks. Complete the sentence by providing the correct answer on each sentence.
1. Thermal compound helps to keep the __________________ cool.
2. Secure the _________________ to the case using the proper screws.
3. The ___________________ data cable has a 7-pin connector.
4. Attach the ___________________ cable to the video port.
5. The _____________________ data cable has a 34-pin connector and it has a stripe to denote the location of pin 1
6. Power cables are used to distribute electricity from the power supply to the ________________________ and other
components.
7. A _________________enables a computer to connect to a wireless network.
8. An _______________________ is a storage device that reads and writes information to CDs or DVDs.
9. A _____________________ provides temporary data storage for the CPU while the computer is operating.
10. The CPU and motherboard are sensitive to electrostatic discharge so use a grounded ________________________ and
wear an antistatic wrist strap.

TEST 2.
TEST 3.

TEST 4.

Direction: Choose the letter of the correct answer and SHADED it on the space provided.
1. If you’re a freelance designer, this portable software tools for vector graphics, creating
illustrations, charts, and logos is called
a. Gimp b. Inkscape c. Stickies d. Apache open office
2. If you want to use a word processor, spreadsheets, presentations, vector drawing, and databases,
what portable software you need to use?
a. Inkscape b. Foobar2000 c. Gimp d. Apache open office
3. This is a secure choice for browsing the web, checking emails, or anything
else you might need to do, what type of web browser you will use?
a. Google Chrome b. Linux c. LLMC d. Apache open office
4. If you want to create business charts and presentations. It has an intuitive
interface and provides easy-to-use templates, what appropriate portable
application you use?
a. Apache open office b. Google Chrome c. Inkscape d. XMind
5. This portable application software supports most popular audio formats, and lets you rip audio
CDs, create playlists, and play natively from within the app.
a. VLC Media player b. Xmind c. Foobar2000 d. Gimp

Prepared by: MELITO D. GALIZA JR.

Approved: FERDINAND V. CUARESMA PhD


Principal III

You might also like