WIN-PAK PRO

CONFIGURATION GUIDE

TD9009 rev0701

5 0 0 7 S o u t h H o w e l l Av e . • M i l w a u k e e W I 5 3 2 0 7 • ( 4 1 4 ) 7 6 9 - 5 9 8 0 • ( 8 0 0 ) 3 2 3 - 4 5 7 6 • F a x ( 4 1 4 ) 7 6 9 - 5 9 8 9 • w w w. e n g s y s g r o u p . c o m
 2

Microsoft and Windows 2000, SQL 2000 are either trademarks

or registered trademarks of Microsoft Corporation in the United
States and/or other countries. Specifications subject to change
without notice.
© 2001 Northern Computers, Inc. All rights reserved.
 WIN-PAK PRO
CONFIGURATION GUIDE

Contents

WIN-PAK PRO System Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

PRO-2200 Modular Control System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

PW-2000 Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Hardwired Systems

with PRO-2200 Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

with PW-2000 Controllers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Dial-Up Systems

with PRO-2200 Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

with PW-2000 Controllers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Dial-Up & Hardwired Systems

with PRO-2200 Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

with PW-2000 Controllers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

LAN/WAN Systems

with PRO-2200 Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

with PW-2000 Controllers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

WIN-PAK PRO Computer Packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

PRO-2200 Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

PW-2000 Controllers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Communication Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Computer Hardware/Software Specifications . . . . . . . . . . . . . . . . . . . . . . . . . .24

Power/Capacity Worksheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

5007 South Howell Ave. • Milwaukee WI 53207 • (414) 769-5980 • (800) 323-4576 • Fax (414) 769-5989 • www.engsysgroup.com
3
 WIN-PAK PRO
CONFIGURATION GUIDE

WIN-PAK PRO System Overview

WIN-PAK PRO
Database Server (Up to 255 clients can be licensed
for up to 255 communication servers)
LAN/WAN TCP/IP

Signature
Capture Pad

Badge Printer Event Printer Event Printer

Badging Workstation Workstation COM Server/
Camera
Workstation
Lighting Kit
Up to 64 COM ports Up to 64 COM ports
with optional with optional
multi-port adapter multi-port adapter

Multi-Port Adapter

RS-232 to RS-485 Converter RS-485 PC Interface

PRO22CVT1 Modem

Telephone

Modem

PRO-2200 PRO-2200 PW-2000-IV PW-2000-IV PRO-2200

Up to 8 PRO-2200 Intelligent Control modules Only one intelligent control module per
per local 485 drop line dial-up line using RS-232 direct connection
Up to 31 panels
Up to eight I/O or reader modules Up to eight I/O or reader modules
per local 485 drop line
per PRO-2200 Intelligent Control module per PRO-2200 Intelligent Control module

Hardwired System Hardwired System Dial-Up System

with PRO-2200 with PW-2000 with PRO-2200
(refer to page 8) (refer to page 9) (refer to page 10)

4 5007 South Howell Ave. • Milwaukee WI 53207 • (414) 769-5980 • (800) 323-4576 • Fax (414) 769-5989 • www.engsysgroup.com
 WIN-PAK PRO
CONFIGURATION GUIDE

WIN-PAK PRO System Overview

LAN/WAN TCP/IP

Event Printer Event Printer

Workstation COM Server/
Workstation

Up to 64 COM ports
with optional
multi-port adapter

Ethernet RS-232 to LAN

Modem Module-PRO22EN Converter
for the Intelligent
Telephone Controller-PRO22IC 485 PC Interface
located inside for LAN Converter
Modem enclosure-PRO22ENC1
PRO22ENC2
RS-485 Remote PRO22ENC3
Interface

PW-2000-IV PW-2000-IV PRO-2200 PW-2000-IV PW-2000-IV

Up to 31 panels Up to eight I/O or reader modules Up to 31 panels

per remote 485 drop line per PRO-2200 Intelligent Control module per 485 drop line

Dial-Up System LAN/WAN System LAN/WAN System

with PW-2000 with PRO-2200 with PW-2000
(refer to page 12) (refer to page 18) (refer to page 19)

5007 South Howell Ave. • Milwaukee WI 53207 • (414) 769-5980 • (800) 323-4576 • Fax (414) 769-5989 • www.engsysgroup.com
5
 WIN-PAK PRO
CONFIGURATION GUIDE

PRO-2200 Modular Control System

The PRO-2200 Intelligent Control Module (PRO22IC) is The PRO22IC supports any combination of up to eight
an advanced access control panel capable of providing I/O or reader boards to monitor alarm input points, relay
solutions for large enterprise applications. The PRO22IC output points, and access control reader interface points.
provides power and flexibility with its 32-bit modular CPU By selecting the appropriate combination, the system can be
and architecture, flash memory for firmware, large local card designed to meet a wide range of applications, while
holder database, and large number of readers and I/O optimizing cost and mounting space.
module support.
The standard PRO22IC accommodates a card database of
The PRO22IC is designed to operate off-line, making access 20,000 cards, expandable up to 50,000 cards with memory
control decisions independently from a PC or other control- expansion kit (PRO22M4). Standard transaction buffer is
ling device. The PRO22IC can also be connected to a host 5,000 transactions, expandable up to 35,000 with memory
computer for system configuration, alarm monitoring, and expansion kit.
direct control. Connectivity to the host computer can be
provided by TCP/IP network connection (PRO22EN), by The PRO22IC is designed to be wall or rack mounted for
direct serial port communication (RS-232 or RS-485), or via maximum density, or tile mounted to save on cost when it
dial-up modem. is remotely located near the devices to be controlled.

Wall-Mount Enclosure Tile-Mount Enclosure (Remote)

PRO22ENC1
13.9"H x 17"W x 9"D 14"H x 16"W x 4.5"D
(353mm H x 431.8mm W x 228.6mm D) (355.6mm H x 406.4mm W x 114.3mm D)
PRO22ENC2
PRO22ENC1 PRO22ENC3 Includes:
13.9"H x 18.9"W x 9"D
Power Supply
(353mm H x 480mm W x 228.6mm D)
Battery Backup
Not Included:
Power Supply
Battery Backup Each PRO22ENC3 can mount two full-size PRO-2200
Optional: panels (PRO22IC, PRO22IN, PRO22OUT, PRO22R2) OR
1 PRO22DCC one full-size panel, one PRO22R1 single reader module and
(Daisy Chain Cable) one PRO22MX8 multiplexor module. For example:
1 PRO22EN
(Ethernet Daughter Module) Qty. Module Capacity
1 PRO22M4 (Memory Expansion
Module) 1 PRO22R2 Two readers
19" Rack mount enclosure
(PRO22ENC2) 1 PRO22IN 16 inputs
Each PRO22ENC1 holds up to 9 modules. For example:
Qty. Module Capacity
PRO-2200 Module Capacities
1 PRO22IC Up to eight I/O or reader modules may
PRO22ENC1 PRO22ENC3
be connected to a PRO-2200
Module Readers Input Output Input Output
Intelligent Controller (IC). Each IC
includes two COM ports.
PRO22IC N/A 2* N/A 2* N/A

PRO22R2 2 6 4 10* 6
4 PRO22R2 Eight readers
PRO22IN 0 16 1 18* 2
2 PRO22IN 32 inputs
PRO22OUT 0 0 12 2* 16
2 PRO22OUT 24 outputs
PRO22R1 1 N/A N/A 2 2
To ensure that the maximum allowable current draw of
the PRO22ENC1 is not exceeded, refer to the * Two are used to monitor tamper and power.
Power/Capacity worksheet on page 24.

6 5007 South Howell Ave. • Milwaukee WI 53207 • (414) 769-5980 • (800) 323-4576 • Fax (414) 769-5989 • www.engsysgroup.com
 WIN-PAK PRO
CONFIGURATION GUIDE

PW-2000 Control Panel

The PW-2000 series controllers (PW-2000-III/IV, PW- The standard memory of the PW-2000-III/IV controller
2000-III-X/IV-X) provide decision making capabilities to holds 13,231 card numbers and buffers up to 2,000
ESG access control systems. Each control panel contains transactions. Should your application require greater
a central processing unit (CPU) and memory for local capacities, the PW-2000-III-X/IV-X offers 8 outputs
control capability. Control panel database information is configurable up to 24 outputs and 29,615 cards.
programmed from a central programming device
(computer, printer/programmer, or data terminal). The PW-2000-III/IV firmware has a built-in test capability
The panels can control access to multiple doors with no that can be used to check the functioning of most of the
dependency on a central computer system. All valid card circuit board's hardware.
numbers, time zones, relay pulse times, and alarm point
shunt times are loaded into the controller's memory. The PC software serves as a database manager for the
PW-2000-III/IV control panels. Information is entered into
The minimum configuration of the PW-2000-III/IV the PC databases and then downloaded to the control
includes the control panel, power transformer, reader, panels. During the download procedure, the PC software
suppressor kit, and communication converter. The panels converts the database information at the disk level to a series
interface to the programming device via the 485 multi-drop of command strings from the PW-2000 instruction set. The
interfaces (PW-485-PCI-B or N-485-HUB-2). A single commands are then sent to the appropriate control panels.
communication loop supports up to 31 panels. The panels then operate independently from the computer.
The advantages of using a computer as the system
The PW-2000-III control panel provides 16 points for programming device include ease of programming and
alarm monitoring and four output control relays. The PW- operation, permanent disk storage of all database
2000-IV version has four rather than two card readers and information, and extensive report options.
four output control relays. The PW-2000-III-X/IV-X
control panels include four additional relays (providing a
total of eight) with expanded database/ PW-2000 Control Panel Capacities
buffer memory capacity.
Controller Readers Input Output Cards Buffers
Control panels can operate in a buffered
mode, in which system transactions are PW-2000-III 2 16 4 13,231 2,000
stored in transaction buffer memory at
the panels, rather than transmitted to the PW-2000-III-X 2 16 8* 29,615 2,000
programming device. Every transaction
(input point, change of state, code use) PW-2000-IV 4 16 4 13,231 2,000
uses one location in buffer memory.
The buffered information can later be PW-2000-IV-X 4 16 8* 29,615 2,000
transmitted to the programming device.
* Expandable to 24 outputs Expandable to 20 outputs

PW-2000-III Controller w/Enclosure PW-2000-IV Controller w/Enclosure

1
1 WARNING! 2
WARNING! 2 3
3 4
4 5
5 6
6 7
7 S-4 SUPPRESSION 8
S-4 SUPPRESSION 8 REQUIRED ACROSS109 Lock Solenoid
REQUIRED ACROSS109 Lock Solenoid EVERY ACTIVE RELAY
11
EVERY ACTIVE RELAY
11 AND ELECTRICAL12
AND ELECTRICAL12 DEVICE (CONNECT
DEVICE (CONNECT WITHIN 18 INCHES).
WITHIN 18 INCHES).

Lock Power Supply

Lock Power Supply

WARNING! WARNING!

Panel must be Panel must be

earth grounded. earth grounded.

Status
LED Northern Computers, Inc.

Reader 4
Shield
GND
To N-1000 +5v
DØ
D1
LED

Shield
GND
+5v
DØ
D1
LED

Reader 3
LED D1 DØ +5v LED
GND D1 DØ +5v
Shield GND Shield

Reader 1 Reader 2

14"H x 16"W x 4"D 14"H x 16"W x 4"D

(35.56cm x 40.64cm x 10.16cm) (35.56cm x 40.64cm x 10.16cm)
19 lbs. 19 lbs.

5007 South Howell Ave. • Milwaukee WI 53207 • (414) 769-5980 • (800) 323-4576 • Fax (414) 769-5989 • www.engsysgroup.com 7
8 WIN-PAK PRO
CONFIGURATION GUIDE

Hardwired System with PRO-2200 Modules

RS-485 Multi-Drop Line
WPPAC201 OR 4000' (1,219.2 m) maximum
WPPWS201 Network Hub WPPFS201
PRO22ENC1 PRO22ENC1
Wall Enclosure Wall Enclosure
Up to eight I/O or reader
PRO22CVT1 modules per PRO-2200
328' Intelligent Controller.
PRO-2200 PRO-2200
(100 m) Up to eight IC on one
to Hub S-4 RS-485 drop line.
Suppressor Each PRO22ENC1 can
Workstation COM and Kit
PS-1-12E hold up to 9 modules
Database Server (12 VDC, 2 A
(refer to page 24 for
power supply
for magnetic lock) maximum power/capacity).
B F E
PR-P-PRO PR-P-PRO
Maglock
Alarm NCIPIR
Contact

CABLE SPECS
Cable Description ESG Part #
PR-P-PRO
A High-speed RS-485 cable NC2441-TN
OR B 18 AWG, 6 conductor with shield NC1861-BL
Keypad C 6' (1.82 m) 9F/25M serial cable CBL-2
D CAT 3 or 5 network cable
with RJ45 connectors
E 18 AWG, 2 conductor with shield NC1821-OR
F 18 AWG, 6 conductor with shield NC1861-PK
G 25' modem cable, 25M/pigtail M-56KCBL
NOTE: Plenum cable is available.

PARTS LIST FOR HARDWIRED PARTS LIST FOR HARDWIRED

ACCESS CONTROL SYSTEM ACCESS CONTROL SYSTEM (CONTINUED)
Qty. Part # Description Qty. Part # Description
1 WPPAC201 WIN-PAK PRO COM and database server 1 ML8011-LC-US28 1200 lb. (544.3 kg) magnetic
or computer, monitor, keyboard, network door lock (400 mA, 12 VDC)
WPPFS201 operating system, and network card
1 WPPWS201 WIN-PAK PRO workstation, monitor, 1 S-4 Noise suppressor for door lock
keyboard, software, and network card (required for each active output relay)
1 PRO22ENC1 PRO-2200 Wall Enclosure, rack-mount style. 1 NCIPIR Curtain PIR detector
Holds up to 9 modules.
1 PRO22BAT1 12V, 7AH sealed lead acid battery. 1 PR-P-PRO Proximity card reader
1 PRO22E1PS 12 VDC, 4A continuous output power supply
with 85 to 230 VAC @ 50/60 HZ input. 1 PS-1-12E 12 VDC, 2 A power supply with
(PRO22ENC1 and PRO22ENC2) 4 A hour battery backup for
magnetic lock
1 PRO22ENC2 PRO-2200 19" Rack Mount Enclosure
1 PRO22CVT1 RS-232 to RS-485 converter NETWORK SPECIFICATIONS
1 PRO22IC PRO-2200 Intelligent Controller
Protocol: TCP/IP
*1 PRO22M4 PRO-2200 4 MB Memory Expansion Module
Station Support: WPPAC201 (5 Clients)
1 PRO22R2 PRO-2200 Dual Reader Module WPPFS201 (10 Clients)
*1 PRO22IN PRO-2200 Input Module Network Type: 10\100 Base T Ethernet network cards
with RJ-45 adapters
*1 PRO22OUT PRO-2200 Output Module Network Distance: 328' (100 m) to hub using twisted pair
*1 PRO22DCC Optional Daisy Chain cable for PRO22ENC1,
PRO22ENC2 or PRO22ENC5 enclosure. COMPUTER HARDWARE/SOFTWARE SPECIFICATIONS
Provides a 485 communication and power
bus between the 9 modules. See Computer Hardware/Software Specifications, Page 24.
* Optional

8 5007 South Howell Ave. • Milwaukee WI 53207 • (414) 769-5980 • (800) 323-4576 • Fax (414) 769-5989 • www.engsysgroup.com
 WIN-PAK PRO
CONFIGURATION GUIDE

Hardwired System with PW-2000 Controllers

RS-485 Multi-Drop Line
WPPAC201 OR
4000' (1,219.2 m) maximum
WPPWS201 Network Hub WPPFS201
D D

PW-485-PCI-B PW-2000-IV PW-2000-IV

A A
328'
(100 m)
to hub
S-4
Suppressor PS-1-12E
Workstation COM and Kit
Database Server (12 VDC, 2 A
F E B X-4 power supply X-4
for magnetic lock)

Maglock PR-P-PRO PR-P-PRO

NCIPIR

Alarm
Contact

CABLE SPECS
PR-P-PRO
OR
Cable Description ESG Part #
Keypad A 24 AWG, 2 conductor with shield NC2021-GY-A
B 18 AWG, 6 conductor with shield NC1861-BL
C 6' (1.82 m) 9F/25M serial cable CBL-2
D CAT 3 or 5 network cable
w/RJ45 connectors
PARTS LIST FOR PRO-WATCH NT SINGLE-USER, TWO DOOR E 18 AWG, 2 conductor with shield NC1821-OR
F 18 AWG, 6 conductor with shield NC1861-PK
DIAL-UP ACCESS CONTROL SYSTEM G 25' modem cable, 25M/pigtail M-56KCBL
NOTE: Plenum cable is available.

PARTS LIST FOR HARDWIRED PARTS LIST FOR HARDWIRED

ACCESS CONTROL SYSTEM ACCESS CONTROL SYSTEM (CONTINUED)
Qty. Part # Description Qty. Part # Description
1 WPPAC201 WIN-PAK PRO COM and database *1 PR-P-PRO Proximity card reader
or server computer, monitor, keyboard,
WPPFS201 software, network operating system, *1 PS-1-12E 12 VDC, 2 A power supply with
and network card 4 A hour battery backup for
magnetic lock
1 WPPWS201 WIN-PAK PRO workstation,
monitor, keyboard, software, and
network card

1 PW-485-PCI-B RS-232 to RS-485

communications converter * Required for each door
** Required for each control panel
***1 PW-2000-IV 4-reader, 16-alarm point, 4-relay output *** Required for every four readers
control panel

** 1 X-4 16.5 VDC 50 VA transformer NETWORK SPECIFICATIONS

*1 S-4 Noise suppressor for door lock Protocol: TCP/IP
(required for each active output relay)
Station Support: WPPAC201 (5 Clients)
WPPFS201 (10 Clients)
*1 ML8011-LC-US28 1200 lb (544.3 kg) magnetic door lock Network Type: 10 Base T Ethernet network cards
(400 mA, 12 VDC) with RJ-45 adapters
Network Distance: 328' (100 m) to hub using twisted pair
*1 NCIPIR Curtain PIR detector
COMPUTER HARDWARE/SOFTWARE SPECIFICATIONS
See Computer Hardware/Software Specifications, Page 24.

5007 South Howell Ave. • Milwaukee WI 53207 • (414) 769-5980 • (800) 323-4576 • Fax (414) 769-5989 • www.engsysgroup.com
9
10 WIN-PAK PRO
CONFIGURATION GUIDE

Dial-Up System with PRO-2200 Modules

Central Location

WPPAC201 OR
WPPWS201 WPPFS201 PORT16RJ
Network Hub

H
M-9600-LA Modem
328'
(100 m) H To Leased Line
to Hub Dial-Up
Phone Lines
Workstation COM and
M-56K Modem
Database Server
Two modems at the computer
PORT16RJ supports 16 COM ports. when controlling more than one
PORT32RJ supports 32 COM ports. remote site, and one at each
PORT64RJ supports 64 COM ports. remote location.

Multiple Remote Locations

RS-485 Multi-Drop Line
RS-232 25' (7.62 m) maximum 4000' (1,219.2 m) maximum
PRO22ENC1 PRO22ENC2
Wall Enclosure Rack Enclosure
M-9600-LA Modem PRO22CVT1
Up to eight I/O or reader
To Lease Line modules per PRO-2200
Phone Lines PRO-2200 PRO-2200 Intelligent Controller.
((PRO22ENC1) (PRO22ENC2)
Up to eight IC on one
RS-485 drop line.
Each PRO22ENC1 can
RS-232 - RS-485 hold up to 9 modules
converter (refer to page 24 for
maximum power/capacity).
PR-P-PRO PR-P-PRO

PRO22ENC1, PRO22ENC2 or PRO22ENC3

Remote Enclosure
M-56K Modem G
To Dial-up The PRO22ENC3 enclosure can mount two full-size
PRO-2200 modules (PRO22IC, PRO22IN, PRO22OUT, PRO22R2)
Phone Lines PRO-2200
(PRO22ENC3)
or one full-size module and one PRO22R1 single reader module.

S-4
Suppressor
Kit
PS-1-12E
(12 VDC, 2 A
B F E power supply
for magnetic lock)
Maglock
Alarm NCIPIR
Contact
CABLE SPECS
Cable Description ESG Part #
A High-speed RS-485 cable NC2441-TN
B 18 AWG, 6 conductor with shield NC1861-BL
C 6' (1.82 m) 9F/25M serial cable CBL-2
PR-P-PRO
D CAT 3 or 5 network cable
OR
Keypad w/RJ45 connectors
E 18 AWG, 2 conductor with shield NC1821-OR
F 18 AWG, 6 conductor with shield NC1861-PK
G 25' modem cable, 25M/pigtail M-56KCBL
H 10' modem cable PORTC25
NOTE: Plenum cable is available.

10 5007 South Howell Ave. • Milwaukee WI 53207 • (414) 769-5980 • (800) 323-4576 • Fax (414) 769-5989 • www.engsysgroup.com
 WIN-PAK PRO
CONFIGURATION GUIDE

PARTS LIST FOR DIAL-UP

NETWORK SPECIFICATIONS
ACCESS CONTROL SYSTEM

Qty. Part # Description Protocol: TCP/IP

1 WPPAC201 WIN-PAK PRO COM and database
or server computer, monitor, keyboard, Station Support: WPPAC201 (5 Clients)
WPPFS201 network operating system, and WPPFS201 (10 Clients)
network card
Network Type: 10 Base T Ethernet network cards
1 WPPWS201 WIN-PAK PRO workstation, with RJ-45 adapters
monitor, keyboard, software, Network Distance: 328' (100 m) to hub using twisted pair
and network card
1 PRO22ENC1 PRO-2200 Wall Enclosure, rack-mount
style. Holds up to nine modules.
or
PRO22ENC3 PRO-2200 Remote Enclosure includes
2 A power supply and backup
battery. Holds up to 2 full-size modules
or one full-size module, one PRO22R1
(Single Reader Module), and one
PRO22MX8 (Multiplexor Module).
COMPUTER HARDWARE/SOFTWARE SPECIFICATIONS
1 PRO22BAT1 12V, 7AH sealed lead acid battery.
1 PRO22E1PS 12 VDC, 4A continuous output power
supply with 85 to 230 VAC @ 50/60 HZ
input. (PRO22ENC1 and PRO22ENC2)
1 PRO22IC PRO-2200 Intelligent Controller Client Server
(minimum) (minimum)
1 PRO22R2 PRO-2200 Dual Reader Module
Processor Pentium II-300 Pentium II-350
*1 PRO22M4 PRO-2200 4 MB Memory Expansion
Module Memory 128 MB 128 MB
*1 PRO22IN PRO-2200 Input Module Hard Drive 6.4 GB 9 GB SCSI
*1 PRO22OUT PRO-2200 Output Module Video 2 MB Video 2 MB Video
*1 PRO22DCC Optional Daisy Chain cable for CD ROM 16X 16X
PRO22ENC1, PRO22ENC2 or
NETWORKPRO22ENC5
SPECIFICATIONS
enclosure. Provides a
WIN 2000 Microsoft SQL Server 2000
485 communication and power bus Software
Workstation WIN 2000 Server
between the 9 modules.
2 M-56K Dial-up modem (see page 10 for Mouse PS2 Mouse PS2 Mouse
applicable quantities)
17" (13.18 cm) 17" (13.18 cm)
Monitor
1 ML8011-LC-US28 1200 lb. (544.3 kg) magnetic door 1024 x 768 1024 x 768
lock (400 mA, 12 VDC)
2 Serial, 1 Parallel
COM Ports 2 Serial, 1 Parallel
1 S-4 Noise suppressor for door lock ( 2 for badging)*
(required for each active output relay)
Backup NA 8 GB SCSI Tape Backup
1 NCIPIR Curtain PIR detector
* Badging should be done at a workstation. It is not
1 PR-P-PRO Proximity card reader recommended at a database server.
1 PS-1-12E 12 VDC, 2 A power supply with
4 A hour battery backup for
magnetic lock

* Optional

5007 South Howell Ave. • Milwaukee WI 53207 • (414) 769-5980 • (800) 323-4576 • Fax (414) 769-5989 • www.engsysgroup.com
11
12 WIN-PAK PRO
CONFIGURATION GUIDE

Dial-Up System with PW-2000 Controllers

Central Location

WPPAC201 OR
WPPWS201 WPPFS201 Two modems at the computer
when controlling more than one
Network Hub remote site, and one at each
D D COM 1 remote location.
M-9600 Modem
C
328'
(100 m) To Dial-Up Phone Lines
to hub C
M-9600 Modem
Workstation COM and
Database Server COM 2
(Up to 64 COM Ports)

Remote Location
RS-485 Multi-Drop Line
4000' (1,219.2 m) maximum

M-9600 Modem
PW-485-HUB-B PW-2000-IV PW-2000-IV
A A Up to 31 PW-2000-IV
can be supported on
To Dial-Up Phone Lines a single multi-drop line.

S-4
Suppressor PS-1-12E
Kit (12 VDC, 2 A
X-4 power supply X-4
for magnetic lock)

F E B

Maglock PR-P-PRO PR-P-PRO

NCIPIR

Alarm
Contact
CABLE SPECS
Cable Description ESG Part #
PR-P-PRO A 24 AWG, 2 conductor with shield NC2021-GY-A
OR
Keypad B 18 AWG, 6 conductor with shield NC1861-BL
C 6' (1.82 m) 9F/25M serial cable CBL-2
D CAT 3 or 5 network cable
w/RJ45 connectors
E 18 AWG, 2 conductor with shield NC1821-OR
F 18 AWG, 6 conductor with shield NC1861-PK
G 25' modem cable, 25M/pigtail M-56KCBL
NOTE: Plenum cable is available.

12 5007 South Howell Ave. • Milwaukee WI 53207 • (414) 769-5980 • (800) 323-4576 • Fax (414) 769-5989 • www.engsysgroup.com
 WIN-PAK PRO
CONFIGURATION GUIDE

PARTS LIST FOR DIAL-UP

NETWORK SPECIFICATIONS
ACCESS CONTROL SYSTEM

Qty. Part # Description Protocol: TCP/IP

1 WPPAC201 WIN-PAK PRO COM and database
or server computer, monitor, keyboard, Station Support: WPPAC201 (5 Clients)
WPPFS201 software, network operating system, WPPFS201 (10 Clients)
and network card
Network Type: 10 Base T Ethernet network cards
with RJ-45 adapters
1 WPPWS201 WIN-PAK PRO workstation, monitor,
keyboard, software, and network card Network Distance: 328' (100 m) to hub using twisted pair

2 M-9600 Dial-up modem (see page 12 for

applicable quantities)

2 CBL-2 6' (1.82 m) 9F/25M serial cable

(at computer location)

1 PW-485-HUB-B RS-232 to RS-485 communications

converter (one at each remote site).
Back power from PW-2000 or PS-1-12E.

***1 PW-2000-IV 4-reader, 16-alarm point, 4-relay output

control panel COMPUTER HARDWARE/SOFTWARE SPECIFICATIONS

**1 X-4 16.5 VDC 50 VA transformer

*1 S-4 Noise suppressor for door lock

(required for each active relay) Client Server
(minimum) (minimum)
*1 ML8011-LC-US28 1200 lb (544.3 kg) magnetic door lock
Processor Pentium II-300 Pentium II-350
(400 mA, 12 VDC)
Memory 128 MB 128 MB
*1 NCIPIR Curtain PIR detector
Hard Drive 6.4 GB 9 GB SCSI
*1 PR-P-PRO Proximity card reader Video 2 MB Video 2 MB Video

*1 PS-1-12E 12 VDC, 2 A power supply with CD ROM 16X 16X

4 A hour battery backup for
magnetic lock WIN 2000 Microsoft SQL Server 2000
Software
Workstation WIN 2000 Server

Mouse PS2 Mouse PS2 Mouse

17" (13.18 cm) 17" (13.18 cm)
Monitor
1024 x 768 1024 x 768
2 Serial, 1 Parallel
COM Ports 2 Serial, 1 Parallel
* Required for each door ( 2 for badging)*
** Required for each control panel Backup NA 8 GB SCSI Tape Backup
*** Required for every four readers
One required at each remote dial-up site * Badging should be done at a workstation. It is not
recommended at a database server.

5007 South Howell Ave. • Milwaukee WI 53207 • (414) 769-5980 • (800) 323-4576 • Fax (414) 769-5989 • www.engsysgroup.com
13
 WIN-PAK PRO
CONFIGURATION GUIDE

Dial-Up & Hardwired Systems with PRO-2200 Modules

Central Location
PRO22ENC1 PRO22ENC1
WPPAC201 OR Wall Enclosure Wall Enclosure
WPPWS201 WPPFS201 PORT16RJ
Network Hub
PRO-2200 A PRO-2200
(PRO22ENC1) (PRO22ENC1)
H
M-9600-LA Modem
328'
(100 m) H To Leased Line
to Hub Dial-Up
Phone Lines
Workstation COM and
M-56K Modem
Database Server
Two modems at the computer PR-P-PRO PR-P-PRO
PORT16RJ supports 16 COM ports. when controlling more than one
PORT32RJ supports 32 COM ports. remote site, and one at each
PORT64RJ supports 64 COM ports. remote location.

Multiple Remote Locations

RS-485 Multi-Drop Line
RS-232 25' (7.62 m) maximum 4000' (1,219.2 m) maximum
PRO22ENC1 PRO22ENC2
M-9600-LA Modem Wall Enclosure Rack Enclosure
PRO22CVT1
Up to eight I/O or reader
To Lease Line modules per PRO-2200
Phone Lines PRO-2200 PRO-2200 Intelligent Controller.
((PRO22ENC1) (PRO22ENC2)
Up to eight IC on one
RS-485 drop line.
Each PRO22ENC1 can
RS-232 - RS-485 hold up to 9 modules
converter (refer to page 24 for
maximum power/capacity).
PR-P-PRO PR-P-PRO

PRO22ENC1, PRO22ENC2 or PRO22ENC3

Remote Enclosure
M-56K Modem G
To Dial-up The PRO22ENC3 enclosure can mount two full-size
PRO-2200 modules (PRO22IC, PRO22IN, PRO22OUT, PRO22R2)
Phone Lines PRO-2200
(PRO22ENC3)
or one full-size module and one PRO22R1 single reader module.

S-4
Suppressor
Kit
PS-1-12E
(12 VDC, 2 A
B F E power supply
for magnetic lock)
Maglock
Alarm NCIPIR
Contact
CABLE SPECS
Cable Description ESG Part #
A High-speed RS-485 cable NC2441-TN
B 18 AWG, 6 conductor with shield NC1861-BL
C 6' (1.82 m) 9F/25M serial cable CBL-2
PR-P-PRO
D CAT 3 or 5 network cable
OR
Keypad w/RJ45 connectors
E 18 AWG, 2 conductor with shield NC1821-OR
F 18 AWG, 6 conductor with shield NC1861-PK
G 25' modem cable, 25M/pigtail M-56KCBL
H 10' modem cable PORTC25
NOTE: Plenum cable is available.

14 5007 South Howell Ave. • Milwaukee WI 53207 • (414) 769-5980 • (800) 323-4576 • Fax (414) 769-5989 • www.engsysgroup.com
 WIN-PAK PRO
CONFIGURATION GUIDE

PARTS LIST FOR DIAL-UP AND HARDWIRED PARTS LIST FOR DIAL-UP AND HARDWIRED
ACCESS CONTROL SYSTEM ACCESS CONTROL SYSTEM (CONTINUED)
Qty. Part # Description Qty. Part # Description

Front-end Hardware Remote Site (continued)

1 WPPAC201 WIN-PAK PRO COM and database 1 PRO22R1 PRO-2200 Single Reader Module
or server computer, monitor, keyboard,
Local Hardwired Site
WPPFS201 network operating system, and
network card 1 PRO22R2 PRO-2200 Dual Reader Module

1 WPPWS201 WIN-PAK PRO workstation, *1 PRO22IN PRO-2200 Input Module

monitor, keyboard, software, and
network card *1 PRO22OUT PRO-2200 Output Module
1 PRO22CVT1 RS-232 to RS-485 converter
1 PRO22CVT1 RS-232 to RS-485 converter
2 M-56K Dial-up modem (see page 14 for
applicable quantities) 1 PRO22ENC1 PRO-2200 Wall Enclosure, rack-mount
style, includes 4 A power supply
2 PORTC25 10' modem cable and backup battery. Holds up to 9
modules.
1 PORT16RJ Adds 16 additional COM Ports
1 S-4 Noise suppressor for door lock
Remote Site (required for each active output relay)
1 PRO22ENC3 PRO-2200 Remote Enclosure includes
1 PRO22M4 PRO-2200 4 MB Memory Expansion
2 A power supply and backup Module
battery. Holds up to 2 full-size modules
or one full-size module, one PRO22R1 1 ML8011-LC-US28 1200 lb (544 kg) magnetic door lock
(Single Reader Module) and one (400 mA, 12 VDC)
PRO22MX8 (Multiplexor Module).
1 NCIPIR Curtain PR detector
**1 PRO22IC PRO-2200 Intelligent Controller
1 PRO22ENC1 PRO-2200 Wall Enclosure, rack-mount 1 PR-P-PRO Proximity card reader
style. Holds up to nine modules.
1 PRO22ENC2 19” Rack Mount Enclosure 1 PS-1-12E 12 VDC, 2 A power supply with
4 A hour battery backup for
1 PRO22BAT1 12V, 7AH sealed lead acid battery. magnetic lock
1 PRO22E1PS 12 VDC, 4A continuous output power
supply with 85 to 230 VAC @ 50/60 HZ Note: This configuration is a multi-user system and provides
input. (PRO22ENC1 and PRO22ENC2) dial-up access control to remote locations.
**1 M-56K Dial-up modem (see page 14 for * Optional
applicable quantities) ** One required at each remote dial-up site
1 M-56KCBL 25' modem cable Required for each door
1 S-4 Noise suppressor for door lock
(required for each active output relay) NETWORK SPECIFICATIONS
1 ML8011-LC-US28 1200 lb (544.3 kg) magnetic door lock
(400 mA, 12 VDC) Protocol: TCP/IP
1 NCIPIR Curtain PIR detector
Station Support: WPPAC201 (5 Clients)
1 PR-P-PRO Proximity card reader WPPFS201 (10 Clients)
1 PS-1-12E 12 VDC, 2 A power supply with 4 A
hour battery backup for magnetic lock Network Type: 10 Base T Ethernet network cards
with RJ-45 adapters

1 PRO22DCC Optional Daisy Chain cable for Network Distance: 328' (100 m) to hub using twisted pair
PRO22ENC1, PRO22ENC2 and
PRO22ENC5 enclosure. Provides a COMPUTER HARDWARE/SOFTWARE SPECIFICATIONS
485 communication and power bus
between the 9 modules.
See Computer Hardware/Software Specifications, Page 24.

5007 South Howell Ave. • Milwaukee WI 53207 • (414) 769-5980 • (800) 323-4576 • Fax (414) 769-5989 • www.engsysgroup.com
15
 WIN-PAK PRO
CONFIGURATION GUIDE

Dial-Up & Hardwired Systems with PW-2000 Controllers

Central Location
WPPAC201 OR
RS-232 25' (7.62 m) maximum
WPPWS201 WPPFS201
Network Hub
PW-2000-IV PW-2000-IV
D D
PORT16RJ PW-485-PCI-B
328'
(100 m)
to hub A
H

M-9600 Modem
H To Dial-Up
Phone Lines

M-9600 Modem
Workstation COM and Two modems at the computer
Database Server when controlling more than one PR-P-PRO PR-P-PRO
remote site, and one at each
PORT16RJ supports 16 COM ports. remote location.
PORT32RJ supports 32 COM ports.
PORT64RJ supports 64 COM ports.

Remote Dial-Up Location RS-485 Multi-Drop Line

4000' (1,219.2 m) maximum

M-9600 Modem PW-485-HUB-B PW-2000-IV PW-2000-IV

A A Up to 31 PW-2000-IV
To Dial-Up Phone Lines can be supported on
a single multi-drop line.

S-4
Suppressor PS-1-12E
Kit X-4 (12 VDC, 2 A X-4
power supply
for magnetic lock)

F E B

Maglock PR-P-PRO PR-P-PRO

NCIPIR

Alarm CABLE SPECS

Contact
Cable Description ESG Part #
A 24 AWG, 2 conductor with shield NC2021-GY-A
B 18 AWG, 6 conductor with shield NC1861-BL
PR-P-PRO C 6' (1.82 m) 9F/25M serial cable CBL-2
OR
Keypad D CAT 3 or 5 network cable
w/RJ45 connectors
E 18 AWG, 2 conductor with shield NC1821-OR
F 18 AWG, 6 conductor with shield NC1861-PK
G 25' modem cable, 25M/pigtail M-56KCBL
H 10' modem cable PORTC25
NOTE: Plenum cable is available.

16 5007 South Howell Ave. • Milwaukee WI 53207 • (414) 769-5980 • (800) 323-4576 • Fax (414) 769-5989 • www.engsysgroup.com
 WIN-PAK PRO
CONFIGURATION GUIDE

PARTS LIST FOR DIAL-UP AND HARDWIRED PARTS LIST FOR DIAL-UP AND HARDWIRED
ACCESS CONTROL SYSTEM ACCESS CONTROL SYSTEM (CONTINUED)

Qty. Part # Description Qty. Part # Description

Front-end Hardware Local Hardwired Site (continued)

1 WPPAC201 WIN-PAK PRO COM and database 1 S-4 Noise suppressor for door lock
or server computer, monitor, keyboard, (required for each active output relay)
WPPFS201 software, network operating system,
and network card 1 ML8011-LC-US28 1200 lb. (544 kg.) magnetic door lock
(400 mA, 12 VDC)
1 WPPWS201 WIN-PAK PRO workstation,
monitor, keyboard, software, and 1 NCIPIR Curtain PR detector
network card
1 PR-P-PRO Proximity card reader
1 PORT16RJ 16-port communications controller
1 PS-1-12E 12 VDC, 2 A power supply with
2 M-9600 Dial-up modem (see page 16 for 4 A hour battery backup
applicable quantities) for magnetic lock

2 PORTC25 6’ (1.82 m) 9F/25M serial cable

(at computer location)

Remote Site
* One required at each remote dial-up site
1 PW-2000-IV 4-reader, 16-alarm point, 4-relay output Required for each door
control panel Required for each control panel
Required for every four readers
*1 PW-485-HUB-B RS-232 to RS-485 communications
converter (one needed at each
remote location)
NETWORK SPECIFICATIONS

*1 M-9600 Dial-up modem (see page 16 for

Protocol: TCP/IP
applicable quantities)

1 X-4 16.5 VDC 50 VA transformer Station Support: WPPAC201 (5 Clients)

WPPFS201 (10 Clients)
1 S-4 Noise suppressor for door lock Network Type: 10 Base T Ethernet network cards
(required for each active output relay) with RJ-45 adapters

1 ML8011-LC-US28 1200 lb (544.3 kg) magnetic door lock Network Distance: 328' (100 m) to hub using twisted pair
(400 mA, 12 VDC)

1 NCIPIR Curtain PIR detector

1 PR-P-PRO Proximity card reader COMPUTER HARDWARE/SOFTWARE SPECIFICATIONS

1 PS-1-12E 12 VDC, 2 A power supply with
4 A hour battery backup See Computer Hardware/Software Specifications, Page 24.
for magnetic lock

Local Hardwired Site

1 PW-485-PCI-B RS-232 to RS-485 communications
converter (one needed at each
hardwired location)

1 PW-2000-IV 4-reader, 16-alarm point, 4-relay output

control panel

5007 South Howell Ave. • Milwaukee WI 53207 • (414) 769-5980 • (800) 323-4576 • Fax (414) 769-5989 • www.engsysgroup.com
17
18 WIN-PAK PRO
CONFIGURATION GUIDE

LAN/WAN System with PRO-2200 Modules

WPPAC201 OR
WPPFS201 PRO22EN PRO22ENC1
LAN Board Wall Enclosure
Connector Up to eight I/O or reader
(inside PRO-2200) A modules per PRO-2200
Intelligent Controller
PRO-2200
(refer to page 24 for
maximum power/capacity).
S-4
Suppressor
Kit

COM and
Database Server
B F E
PR-P-PRO
Alarm Maglock
Contact NCIPIR
CABLE SPECS
Existing Ethernet Cable Description ESG Part #
(TCP/IP) Wide Area Network
A High-speed RS-485 cable NC2441-TN
or Local Area Network
B 18 AWG, 6 conductor with shield NC1861-BL
PR-P-PRO C 6' (1.82 m) 9F/25M serial cable CBL-2
OR D CAT 3 or 5 network cable
Keypad w/RJ45 connectors
E 18 AWG, 2 conductor with shield NC1821-OR
F 18 AWG, 6 conductor with shield NC1861-PK
G 25' modem cable, 25M/pigtail M-56KCBL
NOTE: Plenum cable is available.

PARTS LIST FOR LAN/WAN PARTS LIST FOR LAN/WAN

ACCESS CONTROL SYSTEM ACCESS CONTROL SYSTEM (CONTINUED)
Qty. Part # Description Qty. Part # Description
1 WPPAC201 WIN-PAK PRO COM and database server 1 ML8011-LC-US28 1200 lb. (544.3 kg) magnetic door lock
or computer, monitor, keyboard, network (400 mA, 12 VDC)
WPPFS201 operating system, and network card
1 S-4 Noise suppressor for door lock
1 WPPWS201 WIN-PAK PRO workstation, monitor,
(required for each active output relay)
keyboard, software, and network card
1 NCIPIR Curtain PIR detector
1 PRO22ENC1 PRO-2200 Wall Enclosure. Holds up to 9
modules.
1 PR-P-PRO Proximity card reader
1 PRO22BAT1 12V, 7AH sealed lead acid battery.
1 PS-1-12E 12 VDC, 2 A power supply with 4 A hour
1 PRO22E1PS 12 VDC, 4A continuous output power
supply with 85 to 230 VAC @ 50/60 HZ battery backup for magnetic lock
input. (PRO22ENC1 and PRO22ENC2) * Optional
1 PRO22EN PRO-2200 Ethernet Daughter Module
NETWORK SPECIFICATIONS
for PRO22IC
Protocol: TCP/IP
*1 PRO22M4 PRO-2200 4 MB Memory Expansion Module
Station Support: WPPAC201 (5 Clients)
1 PRO22IC PRO-2200 Intelligent Controller WPPFS201 (10 Clients)
Network Type: 10 Base T Ethernet network cards
1 PRO22R2 PRO-2200 Dual Reader Module with RJ-45 adapters
*1 PRO22IN PRO-2200 Input Module Network Distance: 328' (100 m) to hub using twisted pair

*1 PRO22OUT PRO-2200 Output Module COMPUTER HARDWARE/SOFTWARE SPECIFICATIONS

*1 PRO22DCC Optional Daisy Chain cable for PRO22ENC1
enclosure. Provides a 485 communication See Computer Hardware/Software Specifications, Page 24.
and power bus between the 9 modules.

18 5007 South Howell Ave. • Milwaukee WI 53207 • (414) 769-5980 • (800) 323-4576 • Fax (414) 769-5989 • www.engsysgroup.com
 WIN-PAK PRO
CONFIGURATION GUIDE

LAN/WAN System with PW-2000 Controllers

RS-485 Multi-Drop Line
WPPAC201 OR 4000' (1,219.2 m) maximum
WPPFS201

LANSRL100 N485PCI2L PW-2000-IV PW-2000-IV

A A

S-4
Suppressor PS-1-12E
Kit
X-4 (12 VDC, 2 A X-4
power supply
COM and F E B for magnetic lock)
Database Server PR-P-PRO PR-P-PRO
Maglock
NCIPIR

Alarm CABLE SPECS

Contact
Cable Description ESG Part #
A 24 AWG, 2 conductor with shield NC2021-GY-A
B 18 AWG, 6 conductor with shield NC1861-BL
Existing Ethernet PR-P-PRO C 6' (1.82 m) 9F/25M serial cable CBL-2
(TCP/IP) Wide Area Network OR
or Local Area Network Keypad D CAT 3 or 5 network cable
w/RJ45 connectors
E 18 AWG, 2 conductor with shield NC1821-OR
F 18 AWG, 6 conductor with shield NC1861-PK
G 25' modem cable, 25M/pigtail M-56KCBL
NOTE: Plenum cable is available.

PARTS LIST FOR LAN/WAN PARTS LIST FOR LAN/WAN

ACCESS CONTROL SYSTEM ACCESS CONTROL SYSTEM (CONTINUED)

Qty. Part # Description Qty. Part # Description

1 WPPAC201 WIN-PAK PRO COM and database *1 NCIPIR Curtain PIR detector
or server computer, monitor, keyboard,
WPPFS201 software, network operating system, *1 PR-P-PRO Proximity card reader
and network card
*1 PS-1-12E 12 VDC, 2 A power supply
1 LANSRL100 RS-232 to LAN converter (10/100 Mbps) with 4 A hour battery backup
for magnetic lock
1 N485PCI2L RS-485 PCI for LANSRL100

***1 PW-2000-IV 4-reader, 16-alarm point, 4-relay output * Required for each door
control panel ** Required for each control panel
*** Required for every four readers
** 1 X-4 16.5 VDC 50 VA transformer
NETWORK SPECIFICATIONS
*1 S-4 Noise suppressor for door lock
(required for each active output relay) Protocol: TCP/IP
Station Support: WPPAC201 (5 Clients)
*1 ML8011-LC-US28 1200 lb. (544 kg.) magnetic door lock WPPFS201 (10 Clients)
(400 mA, 12 VDC) Network Type: 10 Base T Ethernet network cards
with RJ-45 adapters
Network Distance: 328' (100 m) to hub using twisted pair

COMPUTER HARDWARE/SOFTWARE SPECIFICATIONS

See Computer Hardware/Software Specifications, Page 24.

5007 South Howell Ave. • Milwaukee WI 53207 • (414) 769-5980 • (800) 323-4576 • Fax (414) 769-5989 • www.engsysgroup.com
19
20 WIN-PAK PRO
CONFIGURATION GUIDE

• P-1500** . . . . . . . . . . . . . . . . . . . . . . .Laser report printer

WIN-PAK PRO Computer Packages • PW-NT-REM-1 . . . . . . . . . . . .Remote diagnostic software
WIN-PAK PRO integrates the most advanced security
• WIN-NT-5 . . . . . . . . . . . .5-user Windows NT Server OS
technologies with innovative networking capabilities offering
• WPPU5 . . . . . . .WIN-PAK PRO 5-user 1 COM software
a full-featured security solution for any size facility. This
• SQL2000* . . . . . . . . . . . . . . . . . . . . .MSSQL 2000 5-User
32-bit integrated Access Control, Alarm Monitoring, CCTV
and Badging system runs on Windows 2000, taking full
* Included with WPPAC201-S system only.
advantage of the Windows 2000 security model. Multiple
** Optional
communication servers on a LAN/WAN provide distributed
networking capabilities, significantly improving system
performance. Flexible database architecture uses Microsoft WPPFS201 . . . . . . . . . . .WIN-PAK PRO 10-User FS System
Data Engine (MSDE) or Microsoft SQL Server 2000 for WPPFS201-S . . . . .WIN-PAK PRO/SQL 10-User FS System
The WPPFS201 and WPPFS201-S 10-User FS Systems
more robust performance and expedient transaction pro-
utilize a Compaq file server allowing applications for 10
cessing. Multiple account support allows separate operators'
users. The servers include SCSI hardware and tape backups,
access to the card database, badge layout, and reporting.
as well as a modem with remote emulation software. The
WPPFS201-S is enhanced with the Microsoft SQL Server
WIN-PAK PRO supports the configuration of multiple
for more robust performance and expedient transaction
accounts allowing multiple operators on a LAN or WAN
processing. The standard configurations include the following:
to access the card database, badge layout, and reporting
functions simultaneously. This not only eliminates the need
• MONITOR11 . . . . . . . . . . . . . . . . .Compaq 17” monitor
for redundant data entry, but the difficult task of information
• M-56K . . . . . . . . . . . . . . . . . . . .56K External fax/modem
maintenance. WIN-PAK PRO also supports partitioning of
• CBL-1 . . . . . . . . . . . . . . . . . . . . . . . . .Parallel printer cable
cards and card holders, by account or site, making it easy to
• CBL-2 . . . . . .6ft, 9-pin female to 25-pin male serial cable
monitor and track events within a facility. Alarms can also
• CPU-22-A . . . . . . . . . . . . . . .Standard Compaq file server
be partitioned so that they are routed and acknowledged by
• PW-485-PCI-B . . .RS-232 to RS-485 converter for PW-2000
designated operators or accounts to more precisely act upon
• PB-PRINTER . . . . . . . . . . . . . . . . . . . . . . . .Event printer
these events.
• PB-VP-3** . . . . . . . . . . . . . . . . . . . . .Inkjet report printer
• P-1500** . . . . . . . . . . . . . . . . . . . . . . .Laser report printer
WPPAC201 . . .WIN-PAK PRO 5-User Access Control System • PW-NT-REM-1 . . . . . . . . . . . .Remote diagnostic software
WPPAC201-S . . . .WIN-PAK PRO/SQL 5-User Access Control • WIN-NT-10 . . . . . . . . . .10-user Windows NT Server OS
System • WPPU10 . . . . .WIN-PAK PRO 10-user 1 COM software
The WPPAC201 and WPPAC201-S 5-User Access Control • SQL2000-5* . . . . . . . . . . . . . . . . . . .MSSQL 2000 5-User
Systems utilize a true file server allowing applications for
5 users. The servers include SCSI hardware and tape * Included with WPPFS201-S system only.
backups, as well as a modem with remote emulation software. ** Optional
The WPPAC201-S is enhanced with the Microsoft SQL
Server for more robust performance and expedient WPPWS201 . . . . . . . . . . . . . . .WIN-PAK PRO Workstation
transaction processing. The standard configurations include • MONITOR11 . . . . . . . . . . . . . . . . .Compaq 17” monitor
the following: • CPU-21-A . . . . . . . . . . . . . .Standard Compaq workstation
• TD0074 . . . . . . .WIN-PAK PRO Quick Reference Guide
• MONITOR11 . . . . . . . . . . . . . . . . .Compaq 17” monitor
• M-56K . . . . . . . . . . . . . . . . . . . .56K External fax/modem WPPWS205 . . . . . . . . . . . . . . .WIN-PAK PRO Workstation
• CBL-1 . . . . . . . . . . . . . . . . . . . . . . . . .Parallel printer cable The WPPWS205 has a badging-ready configuration
• CBL-2 . . . . . .6ft, 9-pin female to 25-pin male serial cable that comes with a video capture card. The standard
• CPU-22-A . . . . . . . . . . . . . . .Standard Compaq file server configuration includes the following:
• PW-485-PCI-B . . .RS-232 to RS-485 converter for PW-2000
• PB-PRINTER . . . . . . . . . . . . . . . . . . . . . . . .Event printer • MONITOR11 . . . . . . . . . . . . . . . . .Compaq 17” monitor
• PB-VP-3** . . . . . . . . . . . . . . . . . . . . .Inkjet report printer • CPU-21-A . . . . . . . . . . . . . .Standard Compaq workstation

20 5007 South Howell Ave. • Milwaukee WI 53207 • (414) 769-5980 • (800) 323-4576 • Fax (414) 769-5989 • www.engsysgroup.com
 WIN-PAK PRO
CONFIGURATION GUIDE

• TD0074 . . . . . . .WIN-PAK PRO Quick Reference Guide

• PB-VC-8 . . . . . . . . . . . . . . . . . . . . . .Video Capture Board
PRO-2200 Modules
PRO22IC . . . . . . . . . . . . . .PRO-2200 Intelligent Controller
The PRO22IC Intelligent Controller is an advanced access
WPPAC202 . . . . . . .WIN-PAK PRO 5-User Software & CPU control panel designed for large enterprise applications.
WPPAC202-S . . .WIN-PAK PRO/SQL 5-User Software & CPU Supports any combination of up to eight I/O or reader mod-
The WPPAC202 and WPACS202-S 5-User software and
ules. Provides 1 Serial port (RS-232 or RS-485) for Host
CPUs utilize a Compaq file server allowing applications for
and 2 Serial ports (RS-485) for I/O or reader modules.
5 users. The WPACS202-S is enhanced with the Microsoft
Addressable allowing up to eight IC on the same RS-485
SQL Server for more robust performance and expedient
drop line. Designed with Flash Memory, 1 MB RAM
transaction processing. Communication converter(s)
(expandable to 4MB), Real-time clock, Lithium battery and
and event printer(s) are sold separately. The standard
two dedicated inputs for tamper and power monitor. Can be
configurations include the following:
rack-mounted for maximum density or tile-mounted for
remote locations. Requires 12 VDC +/- 15%. Current draw
• MONITOR11 . . . . . . . . . . . . . . . . .Compaq 17” monitor
is 400 mA. Dimensions: 5.5" W x 1.0" H x 9.0" L.
• CPU-22-A . . . . . . . . . . . . . . .Standard Compaq file server
Operating temperature range is 32° to 122°F (0° to 50°C).
• CBL-2 . . . . . .6ft, 9-pin female to 25-pin male serial cable
• M-56K . . . . . . . . . . . . . . . . . . . .56K External fax/modem
PRO22R2 . . . . . . . .PRO-2200 Series Dual Reader Module
• PW-NT-REM-1 . . . . . . . . . . . .Remote diagnostic software
The PRO22R2 is a Dual Reader Module that interfaces with
• WIN-NT-5 . . . . . . . . . . . . . . .5-user Windows NT server
the PRO22IC providing I/O support for two card readers.
• WPPU5 . . . . . . .WIN-PAK PRO 5-user 1 COM software
It is connected to the PRO22IC through a supervised
• SQL2000-5* . . . . . . . . . . . . . . . . . . .MSSQL 2000 5-User
RS-485 (2-wire) bus at 38,400 bps. Can be rack-mounted
for maximum density or tile-mounted for remote locations.
* Included with WPPAC202-S system only.
Provides 2 reader ports with 5 VDC at 150 mA x 2 or 12
VDC at 175 mA x 2 for clock/data or data0/data1, keypad
WPPFS202 . . . . . .WIN-PAK PRO 10-User Software & CPU multiplexed with card data, 6 general purpose inputs with
WPPFS202-S . .WIN-PAK PRO/SQL 10-User Software & CPU programmable circuit type when rack-mounted, 8 general
The WPPFS202 and WPPFS202-S 10-User software and
purpose inputs with programmable circuit type when tile-
CPUs utilize a Compaq file server allowing applications for
mounted, 2 dedicated inputs for Tamper Detection and
10 users. The servers include SCSI hardware and tape
Power Monitoring (when tile-mounted), 2 general purpose
backups, as well as a modem with remote emulation
Form C 5A 30 VDC relays, 2 general purpose Form C 2A
software. The WPPFS202-S is enhanced with the Microsoft
30 VDC relays when rack-mounted, 4 general purpose
SQL Server for more robust performance and expedient
Form C 2A 30 VDC relays when tile-mounted, and two-
transaction processing. Communication converter(s) and
wire or one-wire bi-color LED. Buzzer support only with
event printer(s) are sold separately. The standard
one-wire LED control. Current draw is 250 mA, plus read-
configurations include the following:
ers. Dimensions: 5.5" W x 1.0" H x 9" L. Operating temper-
ature range is 32° to 122°F (0° to 50°C).
• MONITOR11 . . . . . . . . . . . . . . . . .Compaq 17” monitor
• M-56K . . . . . . . . . . . . . . . . . . . .56K External fax/modem
PRO22R1 . . . . . . .PRO-2200 Series Single Reader Module
• CBL-2 . . . . . .6ft, 9-pin female to 25-pin male serial cable
The PRO22R1 is a Single Reader Module that interfaces
• CPU-22-A . . . . . . . . . . . . . . .Standard Compaq file server
with the PRO22IC providing I/O support for one card
• PW-NT-REM-1 . . . . . . . . . . . .Remote diagnostic software
reader. It is connected to the PRO22IC through a super-
• WIN-NT-10 . . . . . . . . . .10-user Windows NT Server OS
vised RS-485 (2-wire) bus at 38,400 bps. Can be tile-
• WPPU10 . . . . .WIN-PAK PRO 10-user 1 COM software
mounted for remote locations in the PRO22ENC3.
• SQL2000-5* . . . . . . . . . . . . . . . . . . .MSSQL 2000 5-User
Provides 1 reader port with 12 VDC up to 175 mA for
clock/data or data0/data1, keypad multiplexed with card
* Included with WPPFS202-S system only.
data, 6 general purpose inputs with programmable circuit
type, 1 general purpose Form C 5A 30 VDC relay,
1 general purpose Form C 2A 30 VDC relay, 1 header

5007 South Howell Ave. • Milwaukee WI 53207 • (414) 769-5980 • (800) 323-4576 • Fax (414) 769-5989 • www.engsysgroup.com
21
22 WIN-PAK PRO
CONFIGURATION GUIDE

direct connection of the Intelligent Controller (PRO22IC)

PRO-2200 Modules (continued) to 10 Mbps Ethernet.
plug to monitor unsupervised tamper input, and two-wire
or one-wire bi-color LED. Buzzer support only with
PRO22ENC1 & PRO22ENC2 . . . . . . .PRO-2200 Enclosure
one-wire LED control. Current draw is 125 mA, plus
The PRO-2200 system is designed for maximum efficient
readers. Dimensions: 2.9" W x 1.4" H x 3.25" L. Operating use of wall space through the use of a secure metal cabinet
temperature range is 32° to 122°F (0° to 50°C). (PRO22ENC1) that can hold up to 9 modules, a 4 A power
supply, and a self-contained replaceable backup battery.
PRO22IN . . . . . . . . . . . . . .PRO-2200 Series Input Module Typically, one of the 9 modules is an intelligent controller
The PRO22IN is an Input Module that interfaces with the (PRO22IC). The remaining 8 slots can be used and con-
PRO22IC providing 16 supervised inputs with programmable figured in a variety of combinations of reader, super-
circuit type. It is connected to the PRO22IC through a vised inputs, relay outputs, and other specialized mod-
supervised RS-485 (2-wire) bus at 38,400 bps. Can be rack- ules to customize the system for the individual site. The
mounted for maximum density or tile-mounted for remote 4 A power supply provides power for the modules. The bat-
tery is a 7 A hour battery capable of providing backup from 1
locations. Provides 2 general purpose Form C 2A 30 VDC
to 5 hours depending on module configuration. The
relays and 2 dedicated Tamper Detection and Power PRO22ENC1 can be configured using any combination of
Monitoring inputs (when tile-mounted). Requires 12 VDC the PRO22IC, PRO22IN, PRO22OUT, PRO22R2.
+/- 15%. Current draw is 250 mA, 10 to 16 VDC operating An optional daisy chain cable (PRO22DCC) provides a
range. Dimensions: 5.5" W x 1.0" H x 9.0" L. Operating 485 communication and power bus between the 9 modules.
temperature range is 32° to 122°F (0° to 50°C). Dimensions: 14.2" W x 15" H x 7.6" D. Operating temperature
range is 36° to 109°F (2° to 43°C).
PRO22OUT . . . . . . . . . . .PRO-2200 Series Output Module
The PRO22OUT is a Relay Output Module that interfaces PRO22ENC3 . . . . . . . . . . . . .PRO-2200 Remote Enclosure
with the PRO22IC providing 16-relay output control. It is The PRO-2200 Remote Enclosure allows for a variety of
connected to the PRO22IC through a supervised RS-485 system configurations. It can be used in combination with
(2-wire) bus at 38,400 bps. Can be rack-mounted for maximum the PRO22ENC1, for example to place modules closer to
density or tile-mounted for remote locations. Provides 12 the doors they control. Or it can be used alone to house
general purpose Form C 2A 30 VDC relays when rack-mounted modules for a smaller system. This enclosure can mount
(16 Form C 2A 30 VDC relays when tile-mounted), 2 dedicated two full-size PRO-2200 modules (PRO22IC, PRO22IN,
Tamper Detection and Power Monitoring inputs (when tile- PRO22OUT, PRO22R2) or one full-size module, one
mounted). Requires 12 VDC +/- 15%. Current draw is 275 PRO22R1 single reader module and one PRO22MX8
mA, 10 to 16 VDC operating range. Dimensions: 5.5" W x multiplexor module. The 2.5 A power supply (PRO22E3PS)
1.0" H x 9.0" L. Operating temperature range is 32° to provides power for the modules. The battery is a 4.0 A
122°F (0° to 50°C). battery capable of providing 2.5 to 4 hours backup, depending
on configuration. Dimensions: 16" W x 14" H x 4" D.
Operating temperature range is 36° to 109°F (2° to 43°C).
PRO22M4 . .PRO-2200 Series 4 MB Memory Expansion Module
The PRO22M4 is a memory expansion module for the
PRO22IC, allowing up to 100,000 cardholders. Current PRO22ENC5 . . . . . . . . .PRO-2200 Stand Alone Card Rack
draw is 1 mA. The PRO-2200 series Stand Alone Card Rack.

PRO22MX8 . . . . .PRO-2200 Series Eight Port Multiplexor PRO22DCC . . . . . . . .PRO-2200 Series Daisy Chain Cable
The PRO22MX8 is an 8-port RS-485 multiplexor that takes an The PRO22DCC Daisy Chain Cable provides RS-485 and
RS-485 or RS-232 and creates eight RS-485 communications power connections for up to 9 boards in the PRO22ENC1.
channels. Requires 12 VDC +/- 15%, 250 mA. Current draw is
250 mA. Dimensions: 6" W x 1.0" H x 5" L. Operating PRO22CVT1 . . . . . . . . . . . . .RS-485 to RS-232 Converter
The PRO22CVT1 converter accepts RS-485 input from
temperature range is 32° to 122°F (0° to 50° C).
PRO22IC devices and converts to RS-232 via a 9-pin
connector. The connector plugs into the computer’s
PRO22EN . . . .PRO-2200 Series Ethernet Daughter Module COM port and includes a plug-in power supply. Use the
This adapter mounts onto the PRO22IC and allows for PS-1-12E for battery backup operation.

22 5007 South Howell Ave. • Milwaukee WI 53207 • (414) 769-5980 • (800) 323-4576 • Fax (414) 769-5989 • www.engsysgroup.com
 WIN-PAK PRO
CONFIGURATION GUIDE

PW-2000 Controllers Communication Hardware

PW-2000-III . . . . . . . . . . . . . . . .PW-2000-III w/Enclosure PW-485-PCI-B . . . . . . . . . . . . . . . . . . .PW 485 Interface
This three-reader access control panel with RS-485 This RS-485 interface converts an RS-232 signal into a
communication supports Wiegand, Mag-Stripe, and RS-485 signal. One 485 interface is needed for every drop
proximity readers or keypads. Up to 13,231 cards/2,000 line of PW-2000 control panels.
buffers can be loaded. It has 4 output relays, and 16 alarm
points. The locking enclosure, battery backup, and tamper PW-485-HUB-B . . . . . . . . . . . . . . . . . . . .485 Dial-up Hub
switch are included. It requires 16.5 VAC (X-4) or 12 VDC This RS-485 converter is used for remote dial-up
power (PS-1-12E, provided separately). Dimensions: 16" W applications. Only one PW-485-HUB-B is needed per
x 14" H x 4" D, (40.64 cm W x 35.56 cm H x 10.16 cm D). remote site. The HUB converts the transactions from the
Operating temperature range is 35° to 110°F (2° to 43°C). PW-2000 into an RS-232 signal. The hub plugs directly into
a dial-up modem. Plug-in power supply is included. Use the
PW-2000-III-X . . . . . . . . . . . .PW-2000-III-X w/Enclosure PS-1-12E for backup battery operation.
This three-reader access control panel, with RS-485
communication supports Wiegand, Mag-Stripe, and N485PCI2L . . . . . . . . . . .RS-485 to LANSRL100 Interface
proximity readers or keypads. Up to 29,615 cards/2,000 This RS-485 converter is used between the PW-2000 RS-485
buffers can be loaded. It has 8 output relays, and 16 alarm drop line and the LANSRL100. The N485PCI2L connects
points. The locking enclosure, battery backup, and tamper directly into the 25-pin connector on the LANSRL100.
switch are included. It requires 16.5 VAC (X-4) or 12 VDC Plug-in power supply is included. Use the PS-1-12E for
power (PS-1-12E, provided separately). Dimensions: 16" backup battery operation.
W x 14" H x 4" D, (40.64 cm W x 35.56 cm H x 10.16 cm
D). Operating temperature range is 35° to 110°F (2° to 43°C). LANSRL100 . . . . . . . . . . . . . . . .RS-232 to LAN Converter
This device converts the signal from the N485PCI2L into a
PW-2000-IV . . . . . . . . . . . . . . . .PW-2000-IV w/Enclosure 10/100 Mbps Ethernet signal, allowing panel loops to be
This four reader access control panel with RS-485 connected to an existing Ethernet LAN or WAN. Required
communication supports Wiegand, Mag-Stripe, and for PW-2000 LAN/WAN configuration.
proximity readers or keypads. Up to 13,231 cards/2,000
buffers can be loaded. It has 4 output relays, and 16 alarm M-9600 . . . . . . . . . . . . . . . . . .9600 Baud Dial-up Modem
points. The locking enclosure, battery backup, and tamper This is a 9600 baud dial-up modem supporting V.32
switch are included. It requires 16.5 VAC (X-4) or 12 VDC communications. Plug-in power supply is included. Use
power (PS-1-12E, provided separately). Dimensions: 16" W the PS-1-12E for backup battery operation.
x 14" H x 4" D, (40.64 cm W x 35.56 cm H x 10.16 cm D).
Operating temperature range is 35° to 110°F (2° to 43°C). M-9600-LO . . .9600 2-Wire Leased Line Modem, Originate
9600 baud 2-wire leased line modem configured to be the
PW-2000-IV-X . . . . . . . . . . . . .PW-2000-IV-X w/Enclosure Originate modem. Use M-9600-LA for the Answer modem.
This four reader access control panel, with RS-485 Requires 12 VDC supply (not included). Plug-in power sup-
communication supports Wiegand, Mag-Stripe, and ply is included. Use the PS-1-12E for backup
proximity readers or keypads. Up to 29,615 cards/2,000 battery operation.
buffers can be loaded. It has 8 output relays, and 16 alarm
points. The locking enclosure, battery backup, and tamper M-9600-LA . . .9600 2-Wire Leased Line Modem, Answer
switch are included. It requires 16.5 VAC (X-4) or 12 VDC 9600 baud 2-wire leased line modem configured to be the
power (PS-1-12E, provided separately). Dimensions: 16" Answer modem. Use M-9600-LO for the Originate
W x 14" H x 4" D, (40.64 cm W x 35.56 cm H x 10.16 cm modem. Requires 12 VDC supply not included. Plug-in
D). Operating temperature range is 35° to 110°F (2° to 43°C). power supply is included. Use the PS-1-12E for backup
battery operation.

PRO22CVT1 . . . . . . . . . . . . . . .RS-485/RS-232 Converter

This converter accepts RS-485 input from PRO-2200

5007 South Howell Ave. • Milwaukee WI 53207 • (414) 769-5980 • (800) 323-4576 • Fax (414) 769-5989 • www.engsysgroup.com
23
 WIN-PAK PRO
CONFIGURATION GUIDE

Communication Hardware (continued) Computer Hardware/

devices and converts to RS-232 via a 9-pin database con-
nector that plugs into the computer’s COM port. Plug-in
Software Specifications
power supply is included. Use the PS-1-12E for backup Client Server
battery operation. (minimum) (minimum)
Processor Pentium II-300 Pentium II-350
PRO22EN . . . .PRO-2200 Series Ethernet Daughter Module Memory 128 MB 128 MB
This adapter mounts on the PRO22IC and allows for direct
connection of the Intelligent Controller (PRO22IC) to Hard Drive 6.4 GB 9 GB SCSI

10 Mbps Ethernet. Current draw is 150 mA. Video 2 MB Video 2 MB Video

CD ROM 16X 16X

M-56K . . . . . . . . . . . . . . . . .56K Dial-up Modem, External
This 56K baud modem provides dial-up connection to the Software
WIN 2000 Microsoft SQL Server 2000
Workstation WIN 2000 Server
PRO-2200 remote site and is used with the PW-NT-REM1
remote diagnostic software. Mouse PS2 Mouse PS2 Mouse
17" (13.18 cm) 17" (13.18 cm)
Monitor
1024 x 768 1024 x 768
2 Serial, 1 Parallel
COM Ports 2 Serial, 1 Parallel
( 2 for badging)*

Backup NA 8 GB SCSI Tape Backup

* Badging should be done at a workstation. It is not

recommended at a database server.
Power/Capacity Worksheet (example)
Part # Maximum Current Actual Reader Number of Modules Total Current
Draw in mA Current in mA or Readers in mA

*PRO22IC 400 N/A 1 400

**PRO22EN 150 N/A 1 150

**PRO22M4 1 N/A 1 1

*PRO22IN 250 N/A 3 750

*PRO22OUT 275 N/A 2 550

*PRO22R2 250 See R1 and R2 (below) 2 500

5 volt 150 70 2 140
Reader 1
12 volt 175 –

5 volt 150 70 2 140

Reader 2
12 volt 175 –

Total Current Draw: 2,631 mA

Total current draw must be less than 4,000 mA per PRO22ENC1, PRO22ENC2, or PRO22ENC5
(the above example shows a total of 8 modules and 4 readers with a current draw of 2,631 mA).
* No more than 9 modules per PRO22ENC1, PRO22ENC2, or PRO22ENC5.
** PRO22IC sub-assembly.

24 5007 South Howell Ave. • Milwaukee WI 53207 • (414) 769-5980 • (800) 323-4576 • Fax (414) 769-5989 • www.engsysgroup.com
5007 South Howell Ave. • Milwaukee WI 53207 • (414) 769-5980 • (800) 323-4576 • Fax (414) 769-5989 • www.engsysgroup.com 25
5 0 0 7 S o u t h H o w e l l Av e . • M i l w a u k e e W I 5 3 2 0 7 • ( 4 1 4 ) 7 6 9 - 5 9 8 0 • ( 8 0 0 ) 3 2 3 - 4 5 7 6 • F a x ( 4 1 4 ) 7 6 9 - 5 9 8 9 • w w w. e n g s y s g r o u p . c o m