FLOW CONTROL VALVES

HYDRAULIC COMPONENTS

T E C H N I C A L C A T A L O G
 CONTENT
POCLAIN HYDRAULICS Hydraulic components - Flow control valves

FLOW CONTROL VALVES

Throttle with Check valves

THROTTLE WITH CHECK VALVES 5
Throttle with check valve VP-NDV (NG 6, 10) 5

Flow control valves pressure compensated

FLOW CONTROL VALVES PRESSURE COMPENSATED 9
Flow control valve TVD (NG 6) 9
Flow control valve TVTC (NG 6) 13
Flow control valve TVTP-...-B-... (NG 6, 10) 17
Flow control valve TVTP-...-P-... (NG 6, 10) 21

Flow dividers

FLOW DIVIDERS 25
Flow divider DTP (NG 6, 10) 25

12/03/13 3
 Flow control valves - Hydraulic components POCLAIN HYDRAULICS

4 12/03/13
 THROTTLE WITH CHECK VALVES

POCLAIN HYDRAULICS Hydraulic components - Flow control valves

THROTTLE WITH CHECK VALVE VP-NDV (NG 6, 10)

• NG 6, 10
• Up to 350 Bar [5.076 PSI]

Throttle with Check valves

• Up to 100 l/min [26,4 GPM]

• Connecting dimensions to ISO 4401.

• For flow control in both service lines.
• For throttling in supply - and return lines.
• For vertical stacking - sandwich plate design.
• Height and width of the valves to ISO 7790 norms.

VP-NDV-10-.., VP-NDV-6-..

Operation Hydraulic symbol

Throttle with check valves type VP-NDV are used for throttling the pilot and main flow of
the hydraulic fluid in the line A and B.

These valves consist of two throttling spools with setting screws and two check valves
which are built in a housing.

In direction V to P (see the hydraulic symbol) flows the hydraulic fluid with low pressure

Flow control valves pressure compensated

loss through the check valve.

In direction P to V is the hydraulic fluid flow throttled depending on adjustment of the Mounting example
throttling spool.

Features

Size 6 10
Flow dividers

Flow rate l/min [GPM] 60 [15,8] 100 [26,4]

Operating pressure Bar [PSI] 350 [5 076]
Cracking pressure Bar [PSI] 0,4 [5,8]

Oil temperature range °C [°F] -20 to +70 [-4 to +158]

2
Viscosity range mm /s [SUS] 15 to 380 [69,5 to 1760]
Filtration NAS 1638 8
Mass kg [lbs] 1,45 [3,20] 3,3 [7,28]

12/03/13 5
 Flow control valves - Hydraulic components POCLAIN HYDRAULICS

Dimensions

Throttle closed
Throttle opened

1. Nameplate
2. Throttle screw (clockwise
rotation reduces the flow)
3. O-ring plate
4. O-ring 9,25x1,78-4 pcs
5. Fixing bores for fixing
screws M5

Throttle closed
Throttle opened

Assembly instructions

Throttle/check valves type VP-NDV are designed for vertikal stacking. With these valves there can be throttling of the hydraulic fluid flow in
return line or supply line achieved. Direction of throttling can be selected by turning the installation position of the valve i.e. valves size 6 turning
180° around the longitudial axis; valves size 10 turning 180° around the lateral axis (see drawing above). The O-ring plate is always mounted on
the subplate side.

6 12/03/13
 POCLAIN HYDRAULICS Hydraulic components - Flow control valves

P-Q Performance curves

Size 6 Size 10

Throttle with Check valves

P ---> V P ---> V
throttle fully open throttle fully open

Diff. pressure
Diff. pressure

V --->P V --->P
through non-return through non-return
valve valve

Flow Flow

Model code

Flow control valves pressure compensated

V P - N D V - - -
*

Size
Size 6 6
Size 10 10

Seals type
NBR seals for mineral oil HL,HLP to DIN
No designation
51524
FPM seals for HETG, HEES, HEPG to
E
VDMA 24568 and ISO 15380

Special requirements to be briefly specified

Flow dividers

12/03/13 7
 Flow control valves - Hydraulic components POCLAIN HYDRAULICS

8 12/03/13
 FLOW CONTROL VALVES PRESSURE COMPENSATED

POCLAIN HYDRAULICS Hydraulic components - Flow control valves

FLOW CONTROL VALVE TVD (NG 6)

• NG 6
• Up to 350 Bar [5076 PSI]

Throttle with Check valves

• Up to 16 l/min [4,23 GPM]

• Two - way pressure compensated.

• Connecting dimensions to ISO 6264.
• Operating elements: rotary knob / roller.
• With built - in non-return valve.
• Without built - in non-return valve.

TVD-6

Operation Hydraulic symbol

Flow control valves type TVD are used to set the flow of the hydraulic fluid. The flow TVD-6
depends neither on inlet nor on outlet pressures, which means that the flow setpoint valve
remains constant also with a change of the pressure drop.

These valves consist of a housing (1), a pressure compensator (2), an orifice (3), a setting
element (4), and a non-return valve (5).

The hydraulic fluid flow is adjusted by a setting element (4) which moves the orifice (3) to

Flow control valves pressure compensated

the corresponding open position. The flow of the fluid is throttled in the direction from A to
B. Maintaining of the constant flow towards the user is provided by the pressure
compensator (2). The fluid flows through the bore (6) under the pressure compensator, TVD-6-NV
acting on it by the pressure of the line B. From the opposite side, the pressure
compensator is acted upon by the pressure which is before the orifice (3). The pressure
compensator shifts the working position. A pressure built - up in the line B provokes the
movement of the pressure compensator to the increased open position. This enlarges the
gap between the bores (7), the orifice (3) and the user. On the contrary, the pressure
compensator shifts to the closed position if there is a pressure rise in the line A. The
hydraulic fluid flow is constant, and does not depend on the loads on the user.

The non-return valve (5) provides a free flow of the hydraulic fluid in the direction from B to
A.
Detailed
The flow control valve without the non-return valve (5) provides operation of the valve only
in the direction of the flow from A to B..

Flow dividers

12/3/13 9
 Flow control valves - Hydraulic components POCLAIN HYDRAULICS

Features

Type TVD-6-0,9 TVD-6-2 TVD-6-4 TVD-6-8 TVD-6-16

Flow rate l/min [GPM] 0,9 [0,23] 2 [0,53] 4 [1,06] 8 [2,11] 16 [4,23]
Operating pressure Bar [PSI] 100 [1450,38] 350 [5076,32]
Min. pressure drop Bar [PSI] 4 [58,01] 10-12 [145-174] 10-14 [145-203] 10-16 [145-232]
Oil temperature range °C [°F] -20 to +70 [-4 to +158]
Viscosity range mm2/s [SUS] 15 to 380 [69,5 to 1760]
Filtration NAS 1638 8
Mass kg [lbs] 1,6 [3,53]

Dimensions

Lockable rotary knob Rotary knob

8. 4 pcs fixing screws M5 x 65 to ISO 4762-10.9

tightening torque Md=9 Nm
9. O-ring 9,25 x 1,78
10. Scale for setting
read - out
11. Nameplate
12. Lockable rotary knob
13. Rotary knob
Required quality of
the mating surface

10 12/3/13
 POCLAIN HYDRAULICS Hydraulic components - Flow control valves

P-Q Performance curves

Measured at 50°C [122°F] and viscosity of 32 mm2/s [148 SUS].
Flow rate as function of inlet pressure
Flow rate as a function of scale setting

Throttle with Check valves

Flow
Flow

Scale indicator Non-return valve with orifice closed Inlet pressure

Diff. pressure

Flow control valves pressure compensated

Flow

Model code

T V D - 6 - - - -
*
Flow rate l/min [GPM]
0,9 [0,24] 09
2 [0,53] 2
4 [1,06] 4
8 [2,11] 8
16 [4,23] 16

Non-return valve
without non-return valve No designation
with non-return valve NV

Operating element
Flow dividers

Lockable rotary knob No designation

Rotary knob R

Seals type
NBR seals for mineral oil HL,HLP to DIN 51524 No designation
FPM seals for HETG, HEES, HEPG to VDMA 24568 and ISO
E
15380

Special requirements to be briefly specified

12/3/13 11
 Flow control valves - Hydraulic components POCLAIN HYDRAULICS

12 12/3/13
POCLAIN HYDRAULICS Hydraulic components - Flow control valves

FLOW CONTROL VALVE TVTC (NG 6)

• NG 6
• Up to 350 Bar [5076 PSI]

Throttle with Check valves

• Up to 50 l/min [13,21 GPM]

• Three-way pressure compensator.

• Operating element: rotary knob.
• Without built - in relief valve and non return valve.
• With built - in relief valve.
• With built-in non return valve.
• Threaded connections to ISO 1179 (BSPP/Gas), ISO 11926 (UNF).

TVTC-..

Operation Hydraulic symbol

3-way compensated flow control valve enables setting of constant fluid flow on port A TVTC-..
irrespective of the pressure variations.
The excessive flow rate is discharged to port B and can be used as a secondary working
port or return port to a tank.

When the port B is used as a secondary working port the pressure must not exceed the
pressure on port A.

Flow control valves pressure compensated

TVTC-..-VV
A pressure relief valve in valve type TVTC-..-VV limits the pressure in port A on the set
valve. The excessive flow rate is discharged over port R to a tank.

The non return valve in valve type TVTC -..-NV provides a free flow of the hydraulic fluid in
the direction from A to P.

TVTC-..-NV

Features

Type TVTC-12-... TVTC-25-... TVTC-50-...

1 to 12 [0,26 tobis
Flow rate A l/min [GPM] 13,17] 1 to 25 [0,26 to 6,60] 1 to 50 [0,26 to 13,21]
Max. flow rate A l/min [GPM] 32 [8,45] 65 [17,17]
Operating pressure Bar [PSI] 5 to 350 [72,52 to 5076,32]
Flow dividers

Differential pressure Bar [PSI] 5,5

Cracking pressure for non
Bar [PSI] 0,5
return valve
Flow stability (5 to 350 Bar) % ±5 (Q)
Oil temperature range °C [°F] -20 to +70 [-4 to +158]
Viscosity range mm2/s [SUS] 15 to 380 [69,5 to 1760]
Filtration NAS 1638 8
TVTC
2 [4,41]
Mass kg [lbs] TVTC-..-NV
TVTC-..-VV 3 [6,61]

12/03/13 13
 Flow control valves - Hydraulic components POCLAIN HYDRAULICS

Dimensions

TVTC..; TVTC-..-NV

Threaded connections see

Model code

TVTC-..-VV

Threaded connections see

Model code

14 12/03/13
POCLAIN HYDRAULICS Hydraulic components - Flow control valves

P-Q Performance curves Flow rate as a function of scale indication

Throttle with Check valves

Scale indication
Diff. pressure

Flow
Flow

Model code

T V T C - - - - - -
*

Flow control valves pressure compensated

Flow rate l/min [GPM]
1 to 50 [0,26 to 13,21] 50
1 to 25 [0,26 to 6,60] 25
1 to 12 [0,26 to 3,17] 12

Pressure relief valve or non return valve Bar [PSI]

Without relief valve No designation
With relief valve 4 to 175 [58 to 2538] VV17
With relief valve 10 to 350 [145 to 5076] VV35
With non return valve NV

Threaded connections A, B, R
G1/2 1/2
7/8-14 UNF-2B SAE 10

Threaded connection P
G3/4 3/4
1 1/16-12 UNF-2B SAE 12
Flow dividers

Seal type
NBR seals for mineral oil HL,HLP to DIN
No designation
51524
FPM seals for HETG, HEES, HEPG to
E
VDMA 24568 and ISO 15380

Special requirements to be briefly specified

12/03/13 15
 Flow control valves - Hydraulic components POCLAIN HYDRAULICS

16 12/03/13
POCLAIN HYDRAULICS Hydraulic components - Flow control valves

FLOW CONTROL VALVE TVTP-...-B-... (NG 6, 10)

• NG 6, 10

Throttle with Check valves

• Up to 350 Bar [5076 PSI]
• Up to 90 l/min [23,78 GPM]

• Three-way pressure compensated.

• Operating element: rotary knob.
• For independent fitting into a block.

TVTP-...-B-...

Operation Hydraulic symbol

TVTP three-way flow regulators are used to regulate the priority flow in outlet 3 to a
maximum adjustable level largely independent of the load and pressure conditions. The
surplus flow is diverted to the bypass port 2. The bypass flow may be used for a secondary
circuit. Whether the pressure in secondary circuit is higher than the regulated pressure the
valve works as two-way regulator.

Flow control valves pressure compensated

Features

Type TVTP-25-B TVTP-60-B TVTP-90-B

Rated flow 3 l/min [GPM] 25 [6,60] 60 [15,85] 90 [23,78]
Flow rate 1 max. l/min [GPM] 60 [15,85] 90 [23,78] 150 [39,63]
Operating pressure max. Bar [PSI] 350 [5076]
Oil temperature range °C [°F] -20 to +70 [-4 to +158]
Viscosity range mm2/s [SUS] 15 bis to 380 [69,5 to 1760]
Filtration NAS 1638 8
Mass kg [lbs] 0,6 [1,32] 1 [2,20]

Flow rate as a function of scale indication

Measured at 50°C [122°F] and viscosity of 32 mm2/s [148 SUS].
Flow dividers
Flow

Scale indication

12/03/13 17
 Flow control valves - Hydraulic components POCLAIN HYDRAULICS

Dimensions
TVTP-...-B-...

Scale 0 to 10

A B C S Torque into Cavity

Typ
mm [Zoll] mm [Zoll] mm [Zoll] Nm [in.lbf]
TVTP-25-B
155 [6,10] 73,5 [2,83] 37 [1,46] S32 60 - 65 [531 - 575]
TVTP-60-B
TVTP-90-B 176 [6,93] 75 [2,95] 46 [1,81] S41 70 - 75 [619 - 664]

Dimensions of cavity

TVTP-25, TVTP-60 TVTP-90

18 12/03/13
 POCLAIN HYDRAULICS Hydraulic components - Flow control valves

Standard ported body - steel

P-TVTP-50 P-TVTP-90
mm [Zoll] mm [Zoll]
A 25,1 [0,99] 25 [0,98]

Throttle with Check valves

B 50 [1,97] 65 [2,56]
C 10 [0,40] 15 [0,59]
D 80 [3,15] 80 [3,15]
E 53,2 [2,10] 53,5 [2,11]
F 100 [3,94] 110 [4,33]
G 15 [0,59] 17 [0,67]
H 9 [0,35] 11 [0,43]
K 8,6 [0,34] 10,6 [0,42]
L 35 [1,37] 47,5 [1,87]
M 70 [2,75] 95 [3,74]
N 20 [0,78] 26 [1,02]
P 40 [1,57] 52 [2,05]
U G 1/2 G1

Threaded connections to ISO 1179-1.

Flow control valves pressure compensated

Model code

T V T P - - B - -
*

Flow rate l/min [GPM]

25 [6,6] 25
50 [13,2] 50
90 [23,8] 90

Operating element
Rotary knob B

Seal type
NBR seals for mineral oil HL,HLP to DIN 51524 No designation
FPM seals for HETG, HEES, HEPG to VDMA
E
24568 and ISO 15380
Flow dividers

Special requirements to be briefly specified

12/03/13 19
 Flow control valves - Hydraulic components POCLAIN HYDRAULICS

20 12/03/13
POCLAIN HYDRAULICS Hydraulic components - Flow control valves

FLOW CONTROL VALVE TVTP-...-P-... (NG 6, 10)

• NG 6, 10
• Up to 210 Bar [3046 PSI]

Throttle with Check valves

• Up to 90 l/min [23,8 GPM]

• Three-way pressure compensated.

• Operating element: proportional solenoid.
• Control electronics: Amplifier P/N: 1659574.
• For independent fitting into a block.
• Plug-in connector for solenoids to ISO 4400.
• Protection of solenoid IP 54 to EN 60529 / IEC 60529 (IP 65 on request).

TVTP-...-P-...

Operation Hydraulic symbol

TVTP three-way flow regulators are used to regulate the priority flow in outlet 3 to a
maximum adjustable level largely independent of the load and pressure conditions. The
surplus flow is diverted to the bypass port 2. The bypass flow may be used for a secondary
circuit.
Whether the pressure in secondary circuit is higher than the regulated pressure the valve
works as two-way regulator.

Flow control valves pressure compensated

Features
Type TVTP-25 TVTP-50 TVTP-90
Rated flow 3 l/min [GPM] 25 [6,6] 50 [13,2] 90 [23,8]
Flow rate 1 max. l/min [GPM] 60 [15,9] 90 [23,8] 150 [39,6]
Operating pressure max. Bar [PSI] 210 [3045,8]
Hysteresis % <5
Flow constant according to load pressure % <±2
Oil temperature range °C [°F] -20 to +70 [-4 to +158]
Viscosity range mm2/s [SUS] 15 to 380 [69,5 to 1761]
Filtration NAS 1638 7
1 [2,2] (TVTP-..) 1,6 [3,5] (TVTP-..)
Mass kg [lbs]
1,2 [2,6] (TVTP-..G) 2 [4,4] (TVTP-..G)
Power W 17,4 20,8
Voltage V 12 and 24 DC
Rated current at 12 V A 1,25 1,79
Rated current at 24 V A 0,68 0,81
Coil resistance at 12 V; 20 °C [68 °F] Ohm 7,2 4,3
Coil resistance at 24 V; 20 °C [68 °F] Ohm 24,6 21
Rating ED % 100

Solenoid current / flow curves

Measured at 50°C [122°F] and viscosity of 32
mm2/s [148 SUS].
Flow dividers
Flow

Input signal (%)

12/03/13 21
 Flow control valves - Hydraulic components POCLAIN HYDRAULICS

Dimensions

A B C D E S Torque into cavity

mm [Zoll] mm [Zoll] mm [Zoll] mm [Zoll] mm [Zoll] Nm [in.lbf]
TVTP-25-P
170 [6,7] 73,5 [2,9] 35 [1,4] 74 [2,9] 210 [8,3] S32 60-65 [531-575]
TVTP-50-P
TVTP-90-P 198 [7,8] 75 [3,0] 45 [1,8] 84 [3,3] 244 [9,6] S41 70-75 [619-664]

Dimensions of cavity

TVTP-25 and50 TVTP-90

22 12/03/13
 POCLAIN HYDRAULICS Hydraulic components - Flow control valves

Standard ported body - steel

P-TVTP-50 P-TVTP-90
mm [Zoll] mm [Zoll]
A 25,1 [0,99] 25 [0,98]

Throttle with Check valves

B 50 [1,97] 65 [2,56]
C 10 [0,40] 15 [0,59]
D 80 [3,15] 80 [3,15]
E 53,2 [2,10] 53,5 [2,11]
F 100 [3,94] 110 [4,33]
G 15 [0,59] 17 [0,67]
H 9 [0,35] 11 [0,43]
K 8,6 [0,34] 10,6 [0,42]
L 35 [1,37] 47,5 [1,87]
M 70 [2,75] 95 [3,74]
N 20 [0,78] 26 [1,02]
P 40 [1,57] 52 [2,05]
U G 1/2 G1

Threaded connections to ISO 1179-1.

Flow control valves pressure compensated

Model code

T V T P - - P - - - -
*
Flow rate l/min [GPM]
25 [6,6] 25
50 [13,2] 50
90 [23,8] 90

Operating element
Proportional solenoid P

Supply voltage
12 V direct voltage 12DC
24 V direct voltage 24DC

Hand operation of solenoid

Flow dividers

Without hand operation No designation

With hand operation G

Seal type
NBR seals for mineral oil HL,HLP to DIN 51524 No designation
FPM seals for HETG, HEES, HEPG to VDMA 24568 and
E
ISO 15380

Special requirements to be briefly specified

12/03/13 23
 Flow control valves - Hydraulic components POCLAIN HYDRAULICS

24 12/03/13
 FLOW DIVIDERS
POCLAIN HYDRAULICS Hydraulic components - Flow control valves

FLOW DIVIDER DTP (NG 6, 10)

• NG 6, 10

Throttle with Check valves

• Up to 350 Bar [5.076 PSI]
• Up to 70 l/min [18,49 GPM]

• Dividing and combining of flow independent of pressure.

• Dividing and combining ratio: 50 %/ 50 %
• Direct in-line mounting.
• Threaded connections to ISO 9974 (Metric), ISO 1179 (BSPP/Gas), ISO 11926 (UNF).

DTP-10, DTP-6

Operation Hydraulic symbol

The flow divider DTP has two functions, dividing and combining of fluid flow. The regulator
divides the fluid flow in the direction from A to B and C, and combines flows in the direction
from B and C to A. The dividing / combining ratio is 50 % : 50 %, independent of pressure
in respective pipeline,B or C.

The regulator consists of a housing (1), two dividing spools (2) and three weak springs (3).

Division of flow: The fluid flow in the direction from A to B and C.

Flow control valves pressure compensated

The flow in chamber A is divided and flows through the orifices (5) with constant cross-
section and throttles (4) into chambers B and C. The pressure drop through the orifices (5)
depends on the pressure load. The increase of flow towards one of both chambers
provokes increased pressure drop through the orifices. The pressure drop generates the
pressure force which shifts both spools (2). Consequently, the throttles (4) are reduced,
and the pressure drop of fluid through the throttles increases. The spools keep on moving
until the pressure drops through the orifices (5) are balanced. Consequently, both fluid
flows are balanced, too.

Combining of flows: The oil flow in the direction from B and C to A. The operation is
identical as at dividing of flow. The divider combines both flows in the ratio 50% to 50%.

.The principle of operation depends on the pressure drop, which again depends on the
fluid flow. For this reason the divider functions properly only within the defined flow range.
Limitation of maximal flow - rate of pressure drop, limitation of minimal pressure - dividing
and combining accuracy

Flow dividers

12/03/13 25
 Flow control valves - Hydraulic components POCLAIN HYDRAULICS

Features

Type DTP-6-20 DTP-6-35 DTP-6-50 DTP-10-70

Min. flow rate l/min [GPM] 8 [2,11] 12 [3,17] 16 [4,23] 35 [9,25]
Max. flow rate l/min [GPM] 20 [5,28] 35 [9,25] 50 [13,21] 70 [18,49]
Max. pressure range Bar [PSI] 350 [5076]
Dividing % 50 : 50
Flow dividing accuracy % ±5
Oil temperature range °C [°F] -20 to +70 [-4 to +158]
Viscosity range mm2/s [SUS] 15 to 380 [59 to 716]
Filtration NAS 1638 8
Mass kg [lbs] 1,7 [3,75] 2,65 [5,84]

Dimensions

DTP-6 DTP-10

Threaded connections (z=3)

Threaded connections (z=3)

6. Valve cap
7. Two fixing holes for screws ISO 4762
DTP-6 = M6 x 20-10.9
DTP-10 = M6 x 55-10.9
Tightening torque Md = max.15 Nm
8. Nameplate

26 12/03/13
 POCLAIN HYDRAULICS Hydraulic components - Flow control valves

P-Q Performance curves

Measured at 50°C [122°F] and viscosity of 32 mm2/s [148 SUS].

1. DTP-6-20

Throttle with Check valves

2. DTP-6-35
3. DTP-6-50

Diff. pressure
4. DTP10-70

Flow

Model code

D T P - - - - -
*

Flow control valves pressure compensated

Size
Size 6 6
Size 10 10

Flow rate l/min [GPM]

8 - 20 [2,11 - 5,28] 20
DTP-6 12-35 [3,17 - 9,25] 35
16 - 50 [4,23 - 13,21] 50
DTP-10 35 - 70 [9,25 - 18,49] 70

Threaded connection
M 18x15 No designation
DTP-6 G 3/8 G 3/8
3/4-16 UNF-2B SAE 8
M 22x1,5 M 22
DTP-10 G 1/2 G 1/2
7/8-14 UNF-2B SAE 10

Seal type
NBR seals for mineral oil HL,HLP to DIN 51524
Flow dividers

No designation
FPM seals for HETG, HEES, HEPG to VDMA
E
24568 and ISO 15380

Special requirements to be briefly specified

12/03/13 27
Thirteen subsidiaries and a worldwide network
of more than 150 distributors and partners …

12/03/13

A35761V
A35774K

Poclain Hydraulics reserves the right to make any modifications it deems necessary to the products described in this document
without prior notification.The information contained in this document must be confirmed by Poclain Hydraulics before any order is
submitted.
Illustrations are not binding.
The Poclain Hydraulics brand is the property of Poclain Hydraulics S.A.

More information on