55-50 S-N Late Style Front Body Casting shown 7-8@350 Gasket plate to middle body

for Reference only! All other parts

Valve Body shown are from Early Style VB. Pressure Relief
.438x371x049
One or Two .217 Plastic balls. Plate Front to middle body
No Ball Here
Hole end of valve Solenoid Mod 9@760
must face end plug!!
Forward Control C1
1.130x315x042

This gasket goes between

2-8@455 Neutral Relay front body and plate.

1.052x326x026
©
2nd Coast Clutch control

Plates and gaskets are different between early and late VB’s.
Use gaskets that do not cover any holes. Late VB’s have an extra
Late Style Valve Bodies use a check ball in the Front body that does not exist on early VB’s. See
check ball here. Early valve Late Style Front Left for Front Body Check ball locations. DO NOT MIX late and
bodies do not have a check Body Casting early VB parts!
ball pocket and therefore
do not take a ball here. ©
LISTEN UP! Always mark retainer
Accumulator Check s position on which one of the 3 steps
it was originally installed.
Middle Body Front
3rd Band
2@410 Release

Rev Shift Ball Check 900x350x026

U1 Shift 4@435

1.010x403x032
M1 Shift 2-12@435
1-2@410
1.070x324x026
Solenoid Relay Sleeve, Plunger & Valve 712x231x019
U2 Shift 4@435

1.010x403x032 6@930

Pressure 1.900x530x046 Booster & Sleeve

Regulator

© TransGo 2006
 TCC Check Lock up body bolts to back side of rear body
Middle Body Rear Plate Middle body rear to rear body front 8oz@272
440x205x015 Lock up body Lockup
Lockup Plunger & Sleeve
Control 3-8@550
2nd Clutch
4-8@690 Control 824x217x027

1.335x380x033
Rev Shift
Step Restrict

LISTEN UP! Always mark retainer

position on which one of the 3 steps
it was originally installed.
8oz@692
700x273x018 Accumulator
Checks
TCC Check 6-8@340
Accumulator 690x475x340
Checks
Cooler Bypass
Rear body front

Lockup Lockup
LRC Sleeve Relay 2-4@490 Relay
Control
3rd Band
935x232x022 5-4@560 Control

990x295x033 4@435
1-2 Rev Clutch Shift Pressure Relay
Control
1.010x403x032
M2 Shift 2-8@440

Shift Pressure 1.050x325x026

1-4@460 Control
SPC
Plunger
626x224x025
6-8@950

Secondary Reg 1.855x371x038

SLT Accum [email protected] [email protected]

1.535x410x062 1.535x645x088
© TransGo 2006