Fosroc Brushbond FLXIII: Declaration of Performance

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Fosroc® Brushbond FLXIII constructive solutions

Number: UK9-205

DECLARATION OF PERFORMANCE
In accordance with Annex III of Registration (EU) No. 305/2011
(Construction Product Regulation)
amended by Commission Delegated Regulation (EU) No 574/2014

1 Unique identification code of the product-type:


BRUSHBOND FLXIII, 1031001, 1031050
2 Intended use as foreseen by the manufacturer of the construction product in accordance with the harmonised
technical specification:

Surface protection systems methods 1.3, 2.2, 5.1 and 8.2

3 Name, registered trade name or registered trade mark and contact address of the manufacturer as set out in article
11 (5)

Fosroc Limited
Drayton Manor Business Park
Coleshill Road, Tamworth
Staffordshire, B78 3XN, UK

4 Name and contact address of the authorised representative who has received a mandate for the tasks set out on
Article 12 (2):

Not Relevant
5 System or systems for assessment and verification of constancy of performance of the construction product in
accordance with Annex V

System 2+
6a In the case of a declaration of performance concerning a construction product that is covered by a harmonised
standard

EN 1504-2:2004

The notified body


APPlus 0370

6b In case of a declaration of performance concerning a construction product for which a European Technical
Assessment was issued
Not Relevant

Issue Number: 5

Page 1 of 2
Fosroc® Brushbond FLXIII constructive solutions

Number: UK9-205
7 Declared performance

Essential Characteristics Performance Test Method

Adhesion strength by pull-off test ≥ 0.8 MPa EN 1542:1999


110
Water vapour transmission properties Sd < 5m EN ISO 7783:2012
2920
Determination of liquid water
W < 0.1 Kg/m2*h0.5 EN ISO 1062-3:2012
1130 permeability

1800 Permeability to carbon dioxide Sd > 50 m EN 1062-6:2002

Reaction to fire NPD EN 13501-1


1930
Abrasion resistance <3000 mg EN ISO 5470-1:1999
20
Impact resistance Class III ≥ 20 Nm EN ISO 6272-1:2002
1620

8 Appropriate Technical Documentation and/or Specific Technical Documentation:

Not Relevant

The performance of the product identified above is in conformity with the set of declared performance/s. This
declaration of performance is issued in accordance with Regulation (EU) No 305/2011, under the sole responsibility
of the manufacturer identified above.

Signed for the manufacturer and in the name of the manufacturer by:

Jon Potter
Technical Manager

Place and Date of Issue: 07/11/2019 Tamworth

Issue Number: 5

Page 2 of 2

You might also like