Samsung Secret

Product Information

DATE : 05. Apr. 2012

SAMSUNG TFT-LCD

MODEL : LTA460HW04-W

The Information Described in this Specification is Preliminary and can be changed without
prior notice

Samsung Display Co . , LTD.

MODEL LTA460HW04 Doc. No 06-000-G-20120405 Page 1/28

 Contents Samsung Secret

General Description --------------------------------------------------------------------------------------- (4)

General Information --------------------------------------------------------------------------------------- (4)

1. Absolute Maximum Ratings -------------------------------------------------------------------------- (5)

2. Optical Characteristics --------------------------------------------------------------------------------- (6)

3. Electrical Characteristics ------------------------------------------------------------------------------- (9)

3.1 TFT LCD Module
3.2 Back Light Unit
3.3 Converter Input Condition & Specification

4. Input Terminal Pin Assignment --------------------------------------------------------------------- (10)

4.1 Input Signal & Power
4.2 Converter Input Pin Configuration
4.3 Converter Input Power Sequence
4.4 LVDS Interface
4.5 Input Signals, Basic Display Colors and Gray Scale of Each Color

5. Interface Timing ---------------------------------------------------------------------------------------- (18)

5.1 Timing Parameters (DE mode)
5.2 LVDS Input data Characteristics
5.3 Timing diagrams of interface signal ( DE mode )
5.4 3D mode Sequence
5.5 Power ON/OFF Sequence

6. Outline Dimension -------------------------------------------------------------------------------------- (22)

7. Packing --------------------------------------------------------------------------------------------------- (24)

7.1 CARTON (Internal Package)
7.2 Packing Specification

8. Marking & Others ---------------------------------------------------------------------------------------- (25)

9. General Precaution ------------------------------------------------------------------------------------- (26)

9.1 Handling
9.2 Storage
9.3 Operation
9.4 Operation Condition Guide
9.5 Others

MODEL LTA460HW04 Doc. No 06-000-G-20120405 Page 2/28

 Samsung Secret
* Revision History
Rev.
Date Page Summary
No

05. Apr,
000 all First Issued
2012

MODEL LTA460HW04 Doc. No 06-000-G-20120405 Page 3/28

General Description Samsung Secret

Description
LTA460HW04 is a color active matrix liquid crystal display (LCD) that uses amorphous silicon
TFT(Thin Film Transistor) as switching components. This model is composed of a TFT LCD panel,
a driver circuit and a back light unit. The resolution of a 46.0” is 1920 x 1080 and this model can
display up to 1.07 Billion colors with wide viewing angle of 89° or higher in all directions. This panel
is intended to support applications to provide a excellent performance for Flat Panel Display such
as Home-alone Multimedia TFT-LCD TV and High Definition TV.

Features
 RoHS compliance (Pb-free)
 High contrast ratio & aperture ratio with wide color gamut
 SPVA(Super Patterned Vertical Align) mode
 Wide viewing angle (±178°)
 High speed response ( & Natural Motion (DFR: Double Frame Rate) )
 FHD resolution (16:9)
 Low Power consumption
 Edge Type LED (Light Emitting Diode) BLU
 DE (Data Enable) mode
 4ch LVDS (Low Voltage Differential Signaling) interface (4pixel/clock)

General Information

Items Specification Unit Note

1045.9(W) x 602.1(V) ±1.0mm
Module Size mm
34.2 (Max) T/C~Converter
Weight 12,500 g Max

Pixel Pitch 0.53(H) x 0.53(V) mm

Active Display Area 1018.08(H) x 572.67(V) mm

Surface Treatment Haze 2 % - Anti Glare

Display Colors 1.07 Billion colors 8 bit + FRC

Number of Pixels 1,920 x 1,080 pixel

Pixel Arrangement RGB vertical stripe

Display Mode Normally Black

Luminance of White 400 (Typ.) cd/m2

MODEL LTA460HW04 Doc. No 06-000-G-20120405 Page 4/28

 Samsung Secret
1. Absolute Maximum Ratings
If the condition exceeds maximum ratings, it can cause malfunction or unrecoverable
damage to the device.

Item Symbol Min. Max. Unit Note

Power Supply Voltage VDD GND-0.5 13.2 V (1)

Storage temperature TSTG -20 60 ℃

(2)
Operating temperature TOPR 0 50 ℃
Surface temperature TSUR 0 60 ℃ (3)
Shock ( non - operating ) Snop - 30 G (4)
Vibration ( non - operating ) VNOP - 1.5 G (5)

Note (1) Ta= 25 ± 2 °C

(2) Temperature and relative humidity range are shown in the figure below.
a. 90 % RH Max. (Ta ≤ 39 °C)
b. Relative Humidity is 90% or less. (Ta ＞39 °C)
c. No condensation
(3) Although abnormal visual problems can be occurred in TSUR range, the polarizer
is not damaged in this range.
(4) 11ms, sine wave, one time for ±X, ±Y, ±Z axis
(5) 10-300 Hz, Sweep rate 10min, 30min for X,Y,Z axis

Fig. Temperature and Relative humidity range

MODEL LTA460HW04 Doc. No 06-000-G-20120405 Page 5/28

2. Optical Characteristics Samsung Secret

The optical characteristics should be measured in a dark room or equivalent.

Measuring equipment : TOPCON RD-80S, TOPCON SR-3 ,ELDIM EZ-Contrast

(Ta = 25 ± 2°C, VDD=12V, fv= 120Hz, fDCLK = 297 MHz, LED Current = 165 mA)

Item Symbol Condition Min. Typ. Max. Unit Note

Contrast Ratio (1)
C/R - 5000 -
(Center of screen) SR-3
Response (3)
G-to-G Tg - 8 - msec
Time RD-80S
Luminance of White (4)
YL - 400 - cd/m2
(Center of screen) SR-3
Rx Normal 0.649
Red qL,R =0
Ry 0.333
qU,D =0
Gx 0.318
Green
Color Gy Viewing 0.624
TYP. TYP. (5),(6)
Chromaticity Angle
Bx -0.03 0.145 +0.03 SR-3
(CIE 1931)
Blue
By 0.057
Wx 0.280
White
Wy 0.290
Color Gamut - - 70 - % (5)
SR-3
Color Temperature - - 10,000 - K
qL 75 89 -
Hor.
Viewing qR 75 89 - (6)
C/R≥10 Degree
Angle qU 75 89 - EZ-Contrast
Ver.
qD 75 89 -
White Brightness
(2)
Uniformity Buni - - 30 %
SR-3
(9 Points)

- Test Equipment Setup

The measurement should be executed in a stable, windless and dark room between
40min and 60min after lighting the back light at the given temperature for stabilization
of the back light. This should be measured in the center of screen.

Environment condition : Ta = 25 ± 2 °C

MODEL LTA460HW04 Doc. No 06-000-G-20120405 Page 6/28

 Samsung Secret

Photo detector
Photo detector Field

SR-3 1°
RD-80S 2° Field

D : 50㎝

TFT - LCD Module

LCD Panel

The center of the screen

- Definition of test point

320 960 1600

Active Area
180 ⑨ ⑧ ⑦
Test Point
540 ⑥ ⑤ ④

900 ③ ② ①

Note (1) Definition of Contrast Ratio (C/R)

: Ratio of gray max (Gmax) & gray min (Gmin) at the center point ⑤ of the panel
G max
C/R
G min
Gmax : Luminance with all pixels white
Gmin : Luminance with all pixels black

MODEL LTA460HW04 Doc. No 06-000-G-20120405 Page 7/28

 Samsung Secret

Note (2) Definition of 9 points brightness uniformity (Test pattern : Full White )

( B max B min)
Buni  100
B max

Bmax : Maximum brightness

Bmin : Minimum brightness

Note (3) Definition of Response time : Sum of Tr, Tf

Display data Black (data off) White (data on) Black (data off)

TR TF
Optical Instruments
100%
Response
90%

10%
0%
TIME

Note (4) Definition of Luminance of White : Luminance of white at center point ⑤

Note (5) Definition of Color Chromaticity (CIE 1931)

Color coordinate of Red, Green, Blue & White at center point ⑤

Note (6) Definition of Viewing Angle

: Viewing angle range (C/R ≥10)

MODEL LTA460HW04 Doc. No 06-000-G-20120405 Page 8/28

 Samsung Secret
3. Electrical Characteristics

3.1 TFT LCD Module

The connector for display data & timing signal should be connected.
Ta = 25°C ± 2 °C
Item Symbol Min. Typ. Max. Unit Note
Voltage of Power Supply VDD 10.8 12.0 13.2 V (1)
(a) Black - 370 - mA
(b) White IDD - 381 - mA (2),(3)
(c) N-Pattern - 624 900 mA
Vsync Frequency fV 95 120 125 Hz
Hsync Frequency fH 120 135 140 kHz
Main Frequency fDCLK 260 297 305 MHz
Rush Current IRUSH - - 5 A (4)

Note (1) The ripple voltage should be controlled under 10% of VDD.
(2) fV=120Hz, fDCLK = 297.0MHz, VDD = 12.0V, DC Current.
(3) Power dissipation check pattern (LCD Module only)

a) Black Pattern b) White Pattern c) N-Pattern

(4) Measurement Conditions

VDD
100%
90%

10%
GND

TRUSH=470㎲
Rush Current IRUSH can be measured when TRUSH. is 470㎲.

MODEL LTA460HW04 Doc. No 06-000-G-20120405 Page 9/28

 Samsung Secret
3.2 Back Light Unit

The back light unit contains Edge type White LEDs (Light Emitting Diode)

Ta=25 ± 2°C

Control Board

LCD Module

Converter

Item Symbol Min. Typ. Max. Unit Note

Operating Life Time Hr 30,000 - - Hour (1)

Note (1) It is defined as the time to take until the brightness reduces to 50% of its original
value.
[Operating condition : Ta = 25±2℃, For LED Package only. ]

MODEL LTA460HW04 Doc. No 06-000-G-20120405 Page 10/28

3.3 Converter Input Condition & Specification Samsung Secret

Specifications
Items Symbol Conditions Unit Note
Min. Typ. Max.

Input Voltage Vin - 22 24 26 V Ta=25±2 °C

IRUSH (2D) Vin=24.0V

- - 4.8
PWM = 100%
Input Current A
Vin=24.0V
IRUSH (3D) - - 5.3
3D Enable = On

Vin=24.0V
IO (2D) 157 165 173
PWM = 100%
Output
mA Note (1)
Current
Vin=24.0V
IO (3D) 266 280 294
3D Enable = On

ON Vin=24.0 V 2.4 - 5.5

Backlight
V
On/Off
OFF Vin=24.0 V -0.3 - 0.8

VINT_DIM 0 - 3.3 V

Internal Dimming FINT_DIM Vin=24.0 V 140 150 160 Hz Note (3,5)

DINT_DIM 1 - 100 %

DEXT_DIM 1 - 100 %
External Dimming Vin=24.0V
FEXT_DIM 95 - 200 Hz Note(4)
Note (3,5)
High (ON) 2.4 - 5.5
External Dimming
VEXT_DIM V
Signal Level
High (ON) -0.3 - 0.8

Note) Power Consumption is measured when 400 [cd/m ] of luminance which is the typical
luminance.

(1) All data is measured after 60 min warm-up.

MODEL LTA460HW04 Doc. No 06-000-G-20120405 Page 11/28

4. Input Terminal Pin Assignment Samsung Secret

4.1.1 Input Signal & Power Connector : FI-RE41S-HF (JAE/UJU)

Pin Description Pin Symbol Description

1 Vdd(12V) 21 Rx1[3]P

2 Vdd(12V) 22 Rx1[4]N

3 Vdd(12V) 23 Rx1[4]P

4 Vdd(12V) 24 GND

5 Vdd(12V) 25 Rx3[0]N

6 No Connection 26 Rx3[0]P

7 GND 27 Rx3[1]N

8 GND 28 Rx3[1]P

9 GND 29 Rx3[2]N
ODD LVDS
SIGNAL
10 Rx1[0]N 30 Rx3[2]P

11 Rx1[0]P 31 GND

12 Rx1[1]N 32 Rx3CLK-

13 Rx1[1]P 33 Rx3CLK+

14 Rx1[2]N 34 GND
ODD LVDS
15 Rx1[2]P 35 Rx3[3]N
SIGNAL
16 GND 36 Rx3[3]P

17 Rx1CLK- 37 Rx3[4]N

18 Rx1CLK+ 38 Rx3[4]P

19 GND 39 GND

20 Rx1[3]N 40 No Connection

41 No Connection

Note) No Connection : This PINS Should be disconnected because of SEC internal design.

MODEL LTA460HW04 Doc. No 06-000-G-20120405 Page 12/28

 Samsung Secret
4.1.2 Input Signal & Power Connector : FI-RE51S-HF (JAE/UJU)
Pin Description Pin Description
1 Vdd(12V) 26 Rx4[0]P
2 Vdd(12V) 27 Rx4[1]N
3 Vdd(12V) 28 Rx4[1]P
4 Vdd(12V) 29 Rx4[2]N
5 Vdd(12V) 30 Rx4[2]P
6 No Connection 31 GND
EVEN LVDS
7 GND 32 Rx4CLK-
SIGNAL
8 GND 33 Rx4CLK+
9 GND 34 GND
10 Rx2[0]N 35 Rx4[3]N
11 Rx2[0]P 36 Rx4[3]P
12 Rx2[1]N 37 Rx4[4]N
13 Rx2[1]P 38 Rx4[4]P
14 Rx2[2]N 39 GND
15 Rx2[2]P 40 No Connection
16 GND 41 No Connection
17 Rx2CLK- 42 3D_EN 3D_EN signal (Note 2)
EVEN
18 LVDS Rx2CLK+ 43 No Connection
SIGNAL
19 GND 44 No Connection
20 Rx2[3]N 45 No Connection
21 Rx2[3]P 46 No Connection
22 Rx2[4]N 47 No Connection
L/R Signal Indicator in 3D mode
23 Rx2[4]P 48 L/R_I
(Note 2)
24 GND 49 Shutter Out Shutter glass Sync Signal

25 Rx4[0]N 50 No Connection

51 No Connection
Note 1) No Connection : This PINS Should be disconnected because of SEC internal design.
Note 2) 3D_EN / L/R_I signal level - High :3.0V ~ 3.6 V , Low :0 V ~ 0.4V

MODEL LTA460HW04 Doc. No 06-000-G-20120405 Page 13/28

 Samsung Secret
Note3) Recommend timing for L/R_I Signal .
- Guide Signal to Separate L frame and R frame.
- Shutter glass signal & Operation timing also depend on this signal.
- To operate 3D function, need this signal from Set A/D board.
(In Order for using it in 2D mode, change the input condition into GND)

[ 120Hz Input]

Note4) Pin number starts from Left side

PCB
▼ ▼

Pin No. 1 Pin No. 41 Pin No. 1 Pin No. 51

#1 #41 #1 #51

#1 #41 #1 #51

a. All GND pins should be connected together and also be connected to the LCD’s
metal chassis.
b. All power input pins should be connected together.
c. All NC pins should be separated from other signal or power.

MODEL LTA460HW04 Doc. No 06-000-G-20120405 Page 14/28

4.2. Converter Input Pin Configuration Samsung Secret
Connector : Yeon-ho, 20022WR-14B1
Pin Configuration (FUNCTION)
Pin No.
Master

1 ~5 24 V

6~10 GND

11 No Connection

12 Backlight On /Off

13 Dimming Control

14 External PWM

Note(1) If use Dimming Control, Pin 14 Must be N.C

If use External PWM, Pin 13 Must be N.C

4.3. Converter Input Power Sequence

Note) SEQUENCE : ON = Vin(24V) > Dimming Control ≥ Backlight On/Off

OFF = Backlight On/Off ≥ Dimming Control > Vin(24V)

MODEL LTA460HW04 Doc. No 06-000-G-20120405 Page 15/28

4.4 LVDS Interface Samsung Secret
- LVDS Receiver : Tcon (merged)
- Data Format (JEIDA Only)
LVDS pin JEIDA -DATA
TxIN/RxOUT0 R4
TxIN/RxOUT1 R5
TxIN/RxOUT2 R6
TxOUT/RxIN0 TxIN/RxOUT3 R7
TxIN/RxOUT4 R8
TxIN/RxOUT6 R9
TxIN/RxOUT7 G4
TxIN/RxOUT8 G5
TxIN/RxOUT9 G6
TxIN/RxOUT12 G7
TxOUT/RxIN1 TxIN/RxOUT13 G8
TxIN/RxOUT14 G9
TxIN/RxOUT15 B4
TxIN/RxOUT18 B5
TxIN/RxOUT19 B6
TxIN/RxOUT20 B7
TxIN/RxOUT21 B8
TxOUT/RxIN2 TxIN/RxOUT22 B9
TxIN/RxOUT24 HSYNC
TxIN/RxOUT25 VSYNC
TxIN/RxOUT26 DEN
TxIN/RxOUT27 R2
TxIN/RxOUT5 R3
TxIN/RxOUT10 G2
TxOUT/RxIN3 TxIN/RxOUT11 G3
TxIN/RxOUT16 B2
TxIN/RxOUT17 B3
TxIN/RxOUT23 RESERVED
TxIN/RxOUT28 R0
TxIN/RxOUT29 R1
TxIN/RxOUT30 G0
TxOUT/RxIN4 TxIN/RxOUT31 G1
TxIN/RxOUT32 B0
TxIN/RxOUT33 B1
TxIN/RxOUT34 RESERVED

MODEL LTA460HW04 Doc. No 06-000-G-20120405 Page 16/28

 Samsung Secret
4.5 Input Signals, Basic Display Colors and Gray Scale of Each Color
DATA SIGNAL
GRAY
DISPLAY
COLOR RED GREEN BLUE SCALE
(10bit)
LEVEL
R0 R1 R2 R3 R4 R5 R6 R7 R8 R9 G0 G1 G2 G3 G4 G5 G6 G7 G8 G9 B0 B1 B2 B3 B4 B5 B6 B7 B8 B9

BLACK 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -

BLUE 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 -

GREEN 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 -

CYAN 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 -
BASIC
COLOR
RED 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -

MAGENTA 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 -

YELLOW 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 -

WHITE 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 -

BLACK 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R0

1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R1

DARK 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R2
GRAY ↑
: : : : : : : : : : : : : : : : : : : : : : : : : : : : : :
SCALE R3~
OF R1020
: : : : : : : : : : : : : : : : : : : : : : : : : : : : : :
RED ↓
LIGHT 1 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R1021

0 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R1022

RED 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R1023

BLACK 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 G0

0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 G1

DARK 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 G2
GRAY ↑
: : : : : : : : : : : : : : : : : : : : : : : : : : : : : :
SCALE G3~
OF G1020
: : : : : : : : : : : : : : : : : : : : : : : : : : : : : :
GREEN ↓
LIGHT 0 0 0 0 0 0 0 0 0 0 1 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 G1021

0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 G1022

GREEN 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 G1023

BLACK 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 B0

0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 B1

DARK 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 B2
GRAY ↑
: : : : : : : : : : : : : : : : : : : : : : : : : : : : : :
SCALE B3~
OF B1020
: : : : : : : : : : : : : : : : : : : : : : : : : : : : : :
BLUE ↓
LIGHT 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 1 1 1 1 1 1 1 1 B1021

0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 B1022

BLUE 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 B1023

Note) Definition of Gray :

Rn : Red Gray, Gn : Green Gray, Bn : Blue Gray (n = Gray level)
Input Signal : 0 = Low level voltage, 1 = High level voltage

MODEL LTA460HW04 Doc. No 06-000-G-20120405 Page 17/28

 Samsung Secret
5. Interface Timing

5.1 Timing Parameters ( DE mode )

SIGNAL ITEM SYMBOL MIN. TYP. MAX. Unit NOTE

Clock 1/TC 260 297 305 MHz -

Hsync Frequency FH 120 135 140 KHz -

Vsync FV 95 120 125 Hz -

Active
Display TVD - 1080 - Lines -
Vertical Period
Display Term
Vertical
TV 1110 1125 1350 Lines -
Total
Active
Display THD - 1920 - Clocks -
Horizontal Period
Display Term
Horizontal
TH 2092 2200 2348 clocks -
Total

Note) This product is DE mode. But the Hsync & Vsync signal must be inputted

(1) Test Point : TTL control signal and CLK at LVDS Tx input terminal in system
(2) Internal VDD = 3.3V
(3) Spread spectrum
- Modulation rate (max) : ± 1.5 %
- Modulation Frequency : 30~ 100KHz

5.2 LVDS Input Data Characteristics

ITEM SYMBOL Min. Typ. Max. UNIT NOTE

tRSRM - - 500 ps
Input Data
FIN=75MHz
Position
tRSLM -500 - - ps

Input common mode voltage VCM 0.55 - 1.8 V -

Differential Input Voltage |VID| 100 - - mV -

Note) When the skew is measured the Spread Spectrum should be 0%

MODEL LTA460HW04 Doc. No 06-000-G-20120405 Page 18/28

 Samsung Secret
5. 3 Timing diagrams of interface signal ( DE mode )

TV

TVD TVB

DE

TH

THD

DE

DCLK
TC

DATA
SIGNALS

TC
TCH TCL

DCLK 0.5
VCC

TDS TDH

DISPLAY 0.5
DATA
VCC

TES

DE 0.5
VCC

MODEL LTA460HW04 Doc. No 06-000-G-20120405 Page 19/28

 Samsung Secret
5.4 3D mode Sequence
5.4.1 3D Sequence

L/R_I

T6 ≥ 100msec ※ T10 : L/R_I is checked with Valid Active L frame

T7 ≥ 2sec
T8 > 0msec
T9 > 0msec
T10 = 0.7msec
T11 ≥ 1000msec

5.4.2 Level of 3D Control signal

Spec
Test Items Test Condition
Min Max

C-PBA Input Level High 2.7 3.3

3D Enable Level
(Change to 3D mode) Low 0.0 0.4

C-PBA Input Level High 2.7 3.3

L/R_I
(L/R Sync) Low 0.0 0.4

Shutter Glasses Sync High 2.7 3.3

Shutter Out
Level Low 0.0 0.4

MODEL LTA460HW04 Doc. No 06-000-G-20120405 Page 20/28

5.5 Power ON/OFF Sequence Samsung Secret

To prevent a latch-up or DC operation of the LCD Module, the power on/off

sequence should be as the diagram below.

1ms<T1≤10ms
1ms<T2≤50ms
0<T3≤50ms
1000ms≤T4

1000ms≤T5
(Recommend Value)
100ms≤T6
(Recommend Value)

T1 : VDD rising time from 10% to 90%

T2 : The time from VDD to valid data at power ON.
T3 : The time from valid data off to VDD off at power Off.
T4 : VDD off time for Windows restart
T5 : The time from valid data to B/L enable at power ON.
T6 : The time from valid data off to B/L disable at power Off.

 The supply voltage of the external system for the Module input should be the same
as the definition of VDD.
 Apply the lamp voltage within the LCD operation range. When the back light turns on
before the LCD operation or the LCD turns off before the back light turns off,
the display may momentarily show abnormal screen.
 In case of VDD = off level,
please keep the level of input signals low or keep a high impedance.
 T4 should be measured after the Module has been fully discharged between power off
and on period.
 Interface signal should not be kept at high impedance when the power is on.
 In Case T5 is less than 1000msec and T6 is less than 100msec,
Garbage Display can be seen. (It is not related to electrical function issue, Just for
recommendation to prevent Garbage Display )

MODEL LTA460HW04 Doc. No 06-000-G-20120405 Page 21/28

 Samsung Secret
6. Outline Dimension- Front

TBD

MODEL LTA460HW04 Doc. No 06-000-G-20120405 Page 22/28

 Samsung Secret
6. Outline Dimension- Rear

TBD

MODEL LTA460HW04 Doc. No 06-000-G-20120405 Page 23/28

 Samsung Secret
7. PACKING

7.1 CARTON (Internal Package)

7.2 Packing Specification

Item Specification Remark

1. 11.5 / LCD (24ea)
LCD Packing 24 ea / Box 2. 24.1Kg / Packing Box (1ea)
Pallet-Box (Packing-Pallet Box) >. Packingt Box Material : KLB, AK, CK
3. 60g/Slica-Gel (6ea)
1Box / Pallet 1. Pallet weight = 7.8Kg
Pallet-Plastic (PE,W1270,L1150,H125) >. Pallet Material : HDPE

Packing Direction Vertical

Total Pallet Size H x V x height 1270 mm(H) x 1150 mm(V) x 788 mm(height)

Total Pallet 309.34 kg

Pallet (7.8kg) + Module (276kg)
Weight + Packing-Box (24.1kg) + silica-gel(1.44Kg)

MODEL LTA460HW04 Doc. No 06-000-G-20120405 Page 24/28

 Samsung Secret
8. MARKING & OTHERS

A nameplate bearing followed by is affixed to a shipped product at the specified

location on each product.

(1) Part number : LTA460HW04

(2) (2) Revision: Three letters
(3) Lot number : X X X X XXX XX X

Cell Position No. (In the Glass)

Glass No. (In the one Lot)
Lot No. (Glass)
Month
Year (Note1)
Product code
Line
(4) Nameplate Indication

TC Week code : 11 25
week
LTA460HW04
year
1125 40mm
XXXX
XXXXXXXXXX XXX
Revision code
Lot number

80mm
(5) Packing box attach

100mm
LTA460HW04 Part number

TXX
24

Box serial number

165mm
(6) Others
1. After service part
Lamps cannot be replaced because of the narrow bezel structure.

MODEL LTA460HW04 Doc. No 06-000-G-20120405 Page 25/28

9. General Precautions Samsung Secret
9.1 Handling
(a) When the Module is assembled, it should be attached to the system firmly
using all mounting holes. Be careful not to twist and bend the Module.

(b) Because the inverter use high voltage, it should be disconnected from power
before it is assembled or disassembled.

(c) Refrain from strong mechanical shock and / or any force to the Module.
In addition to damage, this may cause improper operation or damage to the Module
and LED back light.

(d) Note that polarizers are very fragile and could be damage easily.
Do not press or scratch the surface harder than a HB pencil lead.

(e) Wipe off water droplets or oil immediately. If you leave the droplets for a long
time, staining or discoloration may occur.

(f) If the surface of the polarizer is dirty, clean it using absorbent cotton or soft cloth.

(g) Desirable cleaners are water, IPA(Isopropyl Alcohol) or Hexane.

Do not use Ketone type materials(ex. Acetone), Ethyl alcohol, Toluene, Ethyl acid
or Methyl chloride. It might permanent damage to the polarizer due to chemical
reaction.

(h) If the liquid crystal material leaks from the panel, it should be kept away
from the eyes or mouth . In case of contact with hands, legs or clothes, it must
be washed away with soap thoroughly.

(i) Protect the module from Electrostatic discharge. Otherwise the ASIC IC or
semiconductor would be damaged.

(j) Use finger-stalls with soft gloves in order to keep display clean during the
incoming inspection and assembly process.

(k) Do not disassemble the Module.

(l) Do not disassemble shield case of inverter & LVDS board

(m) Do not connect N.C pins. (Samsung internal use only)

(n) Protection film for polarizer on the Module should be slowly peeled off just before use
so that the electrostatic charge can be minimized. Must put on antistatic glove while
handling a module
(o) Pins of I/F connector should not be touched directly with bare hands.

MODEL LTA460HW04 Doc. No 06-000-G-20120405 Page 26/28

 Samsung Secret
9.2 Storage

We highly recommend to comply with the criteria in the table below.

Item Unit Min. Max.

Storage
(℃) 10 40
Temperature
Storage Humidity (%rH) 35 75
Storage Life 6 Months
- The storage room should provide good ventilation and temperature
control.
- Products should not be placed on the floor, but on the Pallet away
from
a wall.
- Prevent products from direct sunlight, moisture nor water; Be
cautious of
Storage a build up of condensation.
Condition - Avoid other hazardous environment while storing goods.
- If products delivered or kept in conditions of over the storage period
of 3
months, the recommended temperature or humidity range,
we recommend you leave them at a temperature of 20℃ and a
humidity
of 50% for 24 hours.

9.3 Operation

(a) Do not connect or disconnect the Module in the "Power On" condition.

(b) Power supply should always be turned on/off by the "Power on/off sequence"

(c) Module has high frequency circuits. Sufficient suppression to the electromagnetic
interference should be done by system manufacturers. Grounding and shielding methods
may be important to minimize the interference.

(d) The cable between the back light connector and its inverter power supply should
be connected directly with a minimized length. A longer cable between
the back light and the inverter may cause lower luminance of lamp(LED) and
may require higher startup voltage(Vs).

MODEL LTA460HW04 Doc. No 06-000-G-20120405 Page 27/28

 Samsung Secret

9.4 Operation Condition Guide

(a) The LCD product should be operated under normal conditions.

Normal condition is defined as below;
- Temperature : 20±15℃
- Humidity : 55±20%
- Display pattern : continually changing pattern (Not stationary)

(b) If the product will be used in extreme conditions such as high temperature,
humidity, display patterns or operation time etc.., It is strongly recommended
to contact SEC for Application engineering advice. Otherwise, its reliability and
function may not be guaranteed. Extreme conditions are commonly found at
Airports, Transit Stations, Banks, Stock market, and Controlling systems.

9.5 Others

(a) Ultra-violet ray filter is necessary for outdoor operation.

(b) Avoid condensation of water. It may result in improper operation or disconnection

of electrode.

(c) Do not exceed the absolute maximum rating value. ( supply voltage variation,
input voltage variation, variation in part contents and environmental temperature,
and so on)
Otherwise the Module may be damaged.

(d) If the Module keeps displaying the same pattern for a long period of time,
the image may be "sticked" to the screen.
To avoid image sticking, it is recommended to use a screen saver.

(e) This Module has its circuitry PCB's on the rear side and should be handled
carefully in order not to be stressed.

(f) Please contact SEC in advance when you display the same pattern for a long time.

MODEL LTA460HW04 Doc. No 06-000-G-20120405 Page 28/28