0% found this document useful (0 votes)
104 views2 pages

WPSP-165S: 3 Phase Outputs

This document provides information on a 3-phase generator set including: 1) Ratings for the 165KVA 50Hz and 188KVA 60Hz standby and prime power outputs. 2) Technical specifications for the Perkins 1106A-70TAG2 diesel engine, including cylinders, speed, power and fuel consumption. 3) Details on the alternator, control panel, mounting arrangement, filtration system, exhaust and electrical systems.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
104 views2 pages

WPSP-165S: 3 Phase Outputs

This document provides information on a 3-phase generator set including: 1) Ratings for the 165KVA 50Hz and 188KVA 60Hz standby and prime power outputs. 2) Technical specifications for the Perkins 1106A-70TAG2 diesel engine, including cylinders, speed, power and fuel consumption. 3) Details on the alternator, control panel, mounting arrangement, filtration system, exhaust and electrical systems.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

3 PHASE OUTPUTS

GENERATOR SET 50HZ 60HZ


RATING
MODEL KVA KW KVA KW
STAND-BY 165 136 188 150
WPSP-165S PRIME 150 120 170 136
Ratings at 0.8 pf - Generator designed to operate in ambient temperatures up to 50oC
Standard Voltages 380 – 415 Volts 3 Phase 50HZ
RATING DEFINITIONS:

PRIME POWER STANDBY POWER


These ratings are applicable for supplying These ratings are applicable for supplying
continuous power (at variable load) in Lieu of continuous electrical power (at variable load) in
commercially purchased power. There is no the event of a utility power failure. No overload
limitation to the annual hours of operation and is permitted on these rating. When used at
this model can supply 10% overload power for 1 standby Rating the alternator will be peak
hour in 12 hours. continuous rated (according to ISO3046)

TECHNICAL DATA (50HZ)


Engine model: 1106A-70TAG2 Cooling system: water
Engine manufacturer: Perkins Total coolant capacity: (liters) 21
Emissions statement Stage II Total lubrication system capacity: (liters) 16.5

Number of cylinders: 6 Engine rotation (viewed facing flywheel): Anti-clockwise


Cylinder arrangement Vertical in-line Engine speed: RPM 1500
Aspiration: Turbocharged, air to air Output rated(prime) power: KW 129.5
charge cooled
Combustion system direct injection Fuel consumption at: 50% load L/h 16.4
Compression ratio 16.2:1 75% load: L/h 24.7
Bore/strike: mm. 105x135 100% load: L/h 33.4

Displacement: (liters) 7.01 Specific lube oil consumption: Max 0.8% of fuel Consumption
STANDARD SPECIFICATION WPSP-165S
1. ENGINE 6. ALTERNATOR Screen protected 12.CONTROL PANEL
Perkins heavy duty diesel engine. and drip-proof, self-exciting, self- The manual starting control panel
1.1Governor regulating brush-less alternator. (DSE6020) has been designed
Mechanical, compliance with Four poles, STAR winding and built to combine all the
ISO8528, Class G2. connection, suitable for tropical, instruments control and the
humid and saline climates. H class
warning lights for engine and
2. COOLING RADIATOR insulation IP23.
alternator. The sheet steel made
Radiator and cooling fan complete 7. AUTOMATIC VOLTAGE
panel is carefully painted for
with protection guards, designed to REGULATOR
tropical climates and is designed
cool the engine in ambient Static electronic design voltage
for a dusty environment. Includes
temperatures up to 50° C. regulator. Steady voltage precision
following equipment Ammeter with
within + 1 % from no load to full
selector switch – water
load including cold and hot
temperature meter – oil pressure
variations, at any Power factor
meter- moulded case three pole
between 0.8 and unity.
circuit breaker with thermal and
8. MOTOR STARTING
magnetic release - automatic shut
An overload capacity equivalent to
down in case of HWT, LOP and
between 160% to 300%
over speed - starting key and stop
of full load impedance at zero
push button - acoustical signal -
power factor can be sustained for
warning light for high cooling water
10 seconds.
temperature, low oil pressure,
9. MOUNTING ARRANGEMENT
battery charging - hours meter
9.1Base Frame
The complete generating set is
mounted on heavy duty steel
fabricated base frame Which is
anti rust coated.
9.2Coupling
The radiator is mounted on the Engine and alternator are directly
base frame to avoid vibrations coupled by means of SAE flange
coming from the engine. so there is no possibility of
misalignment after prolong use.
Automatic starting control board
3. FILTRATION SYSTEM The engine fly wheel is flexibly
versions are available as option.
Cartridge type air filter with coupled to the alternator rotor.
13. DOCUMENTATION
security element. Cartridge fuel 9.3Anti Vibration Mounting Pads
A full set of operation and
filter and full lube oil filter. All filters Anti vibration pads are fitted
maintenance manual are provided.
have replaceable elements. between engine-alternator base
14. FACTORY TESTS
frame ensuring complete vibration
Generating set is subject to a strict
4. EXHAUST SYSTEM isolation of rotating assemblies.
load test before delivery. A test
Heavy-duty industrial silencer. 10. FUEL SYSTEM
certificate can be provided as
Metal fuel tank with a total capacity
5. ELECTRICAL SYSTEM optional.
of 268 liters is provided on the
12 Volt DC system with battery 15. QUALITY STANDARDS
base frame. The Fuel tank is easy
charging alternator, Starter motor, Generating set meets the following
to clean and is equipped with
High capacity maintenance free standards ISO 8528, IEC 34.1,
visual fuel level indicator.
lead acid battery, battery rack CEI 2.3, VDE 0530, BS
11. DIMENSIONS
mounted on the generating set 4999-5000, NF51-100. Perkins is
Open Type
base frame, and heavy duty fully accredited ISO 9001
Length 2500 mm
interconnecting cables with company.
Width 770 mm
terminations. 16. WARRANTY
Height 1350 mm
Generating set is guaranteed for a
Weight 1250 Kg
period of 12 months from date of
Silent Type
commissioning or18 months from
Length 3600 mm
Dubai World Central date of shipment which ever
Width 1130 mm
P.OBox 390667,Jabel Ali,UAE occurs earlier.
Height 2105 mm
Tel:+971-4-8823555 Weight 2215 Kg
Fax:+971-4-8879484
[email protected]
www.worldpowersolution.com

In line with our policy of continuous product development, we reserve right to change specification without notice

You might also like