Scribd Logo
Upload

Welcome to Scribd!

  • 79 views

    S1 OpenLab Ver16062013

    Uploaded by

    Trương Tùng Dương
    This document outlines the network configuration for company BKACAD with two sites connected to the internet. It details the IP addressing planning and assignments for each network segment as well as router and server configurations. Key steps include: 1) Configuring routers with hostnames, banners, and interface descriptions. 2) Setting unencrypted passwords for console, vty lines, and enable mode. 3) Configuring DHCP, DNS, TFTP, and mail servers. 4) Testing connectivity between PCs and web/mail servers.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    S1 OpenLab Ver16062013

    Uploaded by

    Trương Tùng Dương
    79 views2 pages
    This document outlines the network configuration for company BKACAD with two sites connected to the internet. It details the IP addressing planning and assignments for each network segment as well as router and server configurations. Key steps include: 1) Configuring routers with hostnames, banners, and interface descriptions. 2) Setting unencrypted passwords for console, vty lines, and enable mode. 3) Configuring DHCP, DNS, TFTP, and mail servers. 4) Testing connectivity between PCs and web/mail servers.

    Original Title

    S1-OpenLab-ver16062013

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document outlines the network configuration for company BKACAD with two sites connected to the internet. It details the IP addressing planning and assignments for each network segment as well as router and server configurations. Key steps include: 1) Configuring routers with hostnames, banners, and interface descriptions. 2) Setting unencrypted passwords for console, vty lines, and enable mode. 3) Configuring DHCP, DNS, TFTP, and mail servers. 4) Testing connectivity between PCs and web/mail servers.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    79 views2 pages

    S1 OpenLab Ver16062013

    Uploaded by

    Trương Tùng Dương
    This document outlines the network configuration for company BKACAD with two sites connected to the internet. It details the IP addressing planning and assignments for each network segment as well as router and server configurations. Key steps include: 1) Configuring routers with hostnames, banners, and interface descriptions. 2) Setting unencrypted passwords for console, vty lines, and enable mode. 3) Configuring DHCP, DNS, TFTP, and mail servers. 4) Testing connectivity between PCs and web/mail servers.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 2

    BKACAD

    CCNA RS version 5.0


    Openlab-CCNA1
     
    A.    Scenarior: Implement network for Company BKACAD with 2 SITEs connect to the INTERNET. The
    company uses both IPv4 and IPv6 for the network, detail as follow:
    -       SITE1-LAN2 use only IPv4 address.
    -       SITE1-LAN1 use both IPv4 and IPv6 address (dual stack).
    -       Wan link use both IPv4 and IPv6 address (dual stack).
    - SITE2-LAN3 use only IPv6 address
    -       Note: DNSv4 assign only IPv4 address, and DNSv6 assign only IPv6 address.
    B.    The tasks are performed by following parameters:
     1. IP Address planning:
     
    LAN IPv4 Address : 188.88.128.0/20 IPv6 Address
    LAN1 100 hosts 2001::/64
    LAN2 200 hosts  
    Loopback3 127 hosts  
    LAN4 250 hosts  
    WAN1 2 hosts 2000:DB1::/64
    WAN2 2 hosts 2000:DB2::/64
    LAN 3   2002::/64
    Internet 200.1.1.0/24 2003::/64
     
    2.Assign IP address, subnet mask, default gateway to the networking devices.
    a.     All routers and server are assigned IP address manually as following rule:
     
    Router interface : +1
    DHCP : +2
    WEB,MAIL : +3
    DNS: +4
    TFTP : +5, PC1 : +11, PC2 : +12.
    Note:  PC5, PC6, PC7, PC8 : assigned IP address by DHCP server.
                 PC3, PC4: assigned IP address auto-config.
     
    Ex: In the subnetwork: 192.168.1.128/25. (there are DHCP, PC5)
    Router's interface : 192.168.1.129           (128+1).
    DHCP server :192.168.1.130       (128+2).
    PC4 client : 192.168.1.142                    (128+14)
     
     
    3. Basic router configuration:
    Overall requirements: all network segments in the network diagram can connect to each other
    (example: ping and tranceroute work for to reach all devices and PCs); users can telnet to get access to router
    CLI.
    a)          Router name, MOTD banner and descriptions
     
    Device Hostname Banner motd Description
    Router SITE1 SITE1 #This is BKACAD-SITE1-GATEWAY#  
    Router SITE2 SITE2 #This is BKACAD-SITE2-GATEWAY#  
    SITE1-f0/0      Connect to LAN1
    SITE1-f0/1      Connect to LAN2
    SITE1-s0/0/0      Connect to Internet
    SITE2-f0/0      Connect to LAN3
    SITE2-f0/1      Connect to LAN4
    SITE2-s0/0/0      Connect to Internet
     
    b)    Password:
    +The console are protected by clear text password (Unencrypted), password= cisco@console”
     +All VTY lines (0 – 4) are protected by clear text password (Unencrypted), password= ”cisco@vty”
    +Set the secret password to enter privileged mode, password= “cisco@enable”.
    c) On Site2 :
    int f0/0
    ipv6 nd other-config-flag
    ipv6 dhcp server DNSv6
     
    4.     Configuring the SERVERS:
    a.     DHCP server:
    DHCP for LAN2 :
    - PoolName: serverPool
    - Start IP address: +10.
    - Maximum number of user: 100
    DHCP for LAN 4 :
    - PoolName: serverPool
    - Start IP address: +50
    - Maximum number of user: 150
     
    b.    Enable TFTP server. Backup routers’ configuration with the file name: R1-confg, R2-confg.
    c.     MAIL:
       Mail server:
       Domain name: BKACAD.com.
    Add username/password: pc1/cisco and pc3/cisco
    PC1 Mail client:
      Name: PC1
      Mail address: [email protected]
     Incoming and outgoing mail server: BKACAD.com
      User pc1, pass cisco
        PC3 Mail client:
      Name: PC3
      Mail address: [email protected]
      Incoming and outgoing mail server:BKACAD.com
      User pc3, pass cisco
    5.     Test.
    -       From PCs, check connectivity with web server BKACAD.com;cisco.com
    -       From PC1, Note: send mail from PC1 to PC3 and check the result.

    You might also like