29/10/21 22:07 Queue Tree / QoS - Using multiple interfaces : mikrotik
r/mikrotik Busca en Reddit Iniciar sesión Regístrate
Publicado por u/logicwrath hace 5 años
4 Queue Tree / QoS - Using multiple interfaces
Hello, How does one properly apply a Queue Tree to multiple interfaces.
Example 1:
Ether2 is LAN1 and Ether6 is LAN2. They are separate networks but they use the same
WAN connection.
Example 2:
Ether2 is LAN1 and GRE1 is a VPN. They both use the same WAN connection.
In RouterOS v6+ there is no longer global-in and global-out to use with Queue Trees. I
was not using RouterOS back in v5 days, but based on the reading I have done this
seems like it would have solved the problem for me. I would be able to make global-in
and global-out the parent interfaces for the queue trees and then create children for
multiple interfaces.
What is the best practice for doing this now in RouterOS v6?
100% upvoteado
7 Comentarios Compartir Guardar Ocultar Reportar
Iniciar sesión
Inicia sesión o crea una cuenta para dejar un
comentario
Regístrate
https://www.reddit.com/r/mikrotik/comments/52egpa/queue_tree_qos_using_multiple_interfaces/ 1/13
29/10/21 22:07 Queue Tree / QoS - Using multiple interfaces : mikrotik
Ordenar Por: Mejor
r/mikrotik Busca en Reddit Iniciar sesión Regístrate
qriff · 5a
Only last step ("#4") http://wiki.mikrotik.com/index.php?title=Manual:Queues_-
_PCQ_Examples
It does this http://wiki.mikrotik.com/wiki/Manual:Queues_-_PCQ
2 Responder Compartir
treenaks · 5a
Except that last step references the (no longer existing) "global-in" and "global-out"
queues
2 Responder Compartir
Seguir leyendo conversación
rfranzen · 5a
I think you can use Interfaces Lists (available since v6.36)
http://forum.mikrotik.com/viewtopic.php?t=110419
2 Responder Compartir
Ver discusión completa (7 comentarios)
Más publicaciones de la comunidad mikrotik
Publicado por u/meritez hace 3 días
45 v7.1rc5 [development] is released!
forum.mikrotik.com/viewto...
https://www.reddit.com/r/mikrotik/comments/52egpa/queue_tree_qos_using_multiple_interfaces/ 2/13
29/10/21 22:07 Queue Tree / QoS - Using multiple interfaces : mikrotik
r/mikrotik Busca en Reddit Iniciar sesión Regístrate
9 Comentarios Compartir
Guardar Ocultar Reportar
Publicado por u/Argentisto hace 5 días
12 PSA: RB5009 and Passive DAC
Haven't seen this mentioned, but I thought I'd just pop in and note for everyone that,
unlike the RB4011, the RB5009 DOES support passive DACs. Currently using one to
connect my RB5009 to my CRS312 with no issues.
16 Comentarios Compartir
Guardar Ocultar Reportar
Publicado por u/sruffilli hace 5 días
10 Wireguard roadwarrior setup
medium.com/@sruff...
3 Comentarios Compartir
Guardar Ocultar Reportar
Publicado por u/ccigas hace 2 días
9 Future Products?
Is there an early adopters product page or a list somewhere that tells us what products
are coming soon?
Really looking for a 2.5Gb PoE Switch one of these days since the TP link version of this
for the Omada series is pretty hard to manage.
10 Comentarios Compartir
Guardar Ocultar Reportar
Publicado por u/genbradly07 hace 2 días
https://www.reddit.com/r/mikrotik/comments/52egpa/queue_tree_qos_using_multiple_interfaces/ 3/13
29/10/21 22:07 Queue Tree / QoS - Using multiple interfaces : mikrotik
7 Mikrotik CCR - Queue performance
r/mikrotik Busca en Reddit Iniciar sesión Regístrate
Wisp...moving to a crm that controls queues for customers on our mikrotiks. The the crm
populates address lists for use with PCQ. With around 800 customers and 10 queues for
our speed plans, we are seeing a CCR1072 tank out between 2 to 2.2gbps. I've tested
using 800 individual smart queues instead and so far haven't seen any issues at peak
4 times,Tree
Queue / QoS of
in excess - Using multiple
3gbps. Those interfaces
results seem in line with my research on the topic....that Cerrar
is to say Smart queues being faster on a CCR than PCQ+AddrLists.
However I've been told some customers push upwards of 5gbps using PCQ+AddrLists on
a single router. Not sure if we are talking apples and oranges or maybe I'm doing
something wrong/less than optimal in my config.
Hoping for feedback on what others have experienced so I know if more troubleshooting
on PCQ is worth it or if setting these up as Simple Queues is the answer.
6 Comentarios Compartir
Guardar Ocultar Reportar
Publicado por u/notMKS hace 4 días
7 Network Automation using Python(Netmiko Module)
youtube.com/watch?...
https://www.reddit.com/r/mikrotik/comments/52egpa/queue_tree_qos_using_multiple_interfaces/ 4/13
29/10/21 22:07 Queue Tree / QoS - Using multiple interfaces : mikrotik
r/mikrotik Busca en Reddit Iniciar sesión Regístrate
Network Automation using Python(Netmiko Module) on MikroTik
0 Comentarios Compartir Guardar Ocultar Reportar
Publicado por u/mihies hace 1 día
6 Locking to and unlocking from a cell tower on LTE
Anybody knows the at command to lock to a specific cell tower? I saw several variants,
like at*cell= then at!clcmd= etc. Also the command to disable the lock. Command and
parameters description appreciated.
8 Comentarios Compartir
Guardar Ocultar Reportar
Publicado por u/segdy hace 4 días
6 BGP peer stuck in opensent. What could be the cause?
I got a BGP tunnel for IPv6 and IPv4 prefix from a tunnelbroker. The tunnel is correctly
configured, both IPv4 and IPv6 endpoints are pingable. Firewall is configured for BGP.
The IPv6 BGP session works and announces my IPv6 prefix. However, although I have
selected both ip and ipv6 in the address families, it only announces my IPv6 prefix and
not also my IPv4 prefix.
The IPv4 BGP session does not work and is always stuck at "opensent". The config is
identical to the IPv6 version and there is literally nothing left I could imagine being an
issue.
What on earth could I still try?
For reference this is my config:
8 Comentarios Compartir
Guardar Ocultar Reportar
Publicado por u/Lars_Galaxy hace 6 días
https://www.reddit.com/r/mikrotik/comments/52egpa/queue_tree_qos_using_multiple_interfaces/ 5/13
29/10/21 22:07 Queue Tree / QoS - Using multiple interfaces : mikrotik
6 HAP ac2 keeps rebooting
r/mikrotik Busca en Reddit Iniciar sesión Regístrate
A minimally configured HAP ac2 continues to reboot due to apparent memory issues.
Here is from the latest problem.
oct/23/2021 07:27:24 system,error,critical kernel failure in previous boot oct/23/2021
07:27:24 system,error,critical out of memory condition was detected oct/23/2021
07:27:24 system,error,critical router was rebooted without proper shutdown, probably
kernel failure oct/23/2021 07:27:25 system,error,critical kernel failure in previous boot
oct/23/2021 07:27:25 system,error,critical out of memory condition was detected
oct/23/2021 07:27:24 system,error,critical router was rebooted without proper shutdown,
probably kernel failure oct/23/2021 07:27:25 system,error,critical kernel failure in
previous boot oct/23/2021 07:27:25 system,error,critical out of memory condition was
detected
17 Comentarios Compartir Guardar Ocultar Reportar
Publicado por u/Gonzo_Geekson hace 2 días
5 Mikrotik Forums and having posts approved
I have an issue getting a hEX Lite router to connect to an OpenVPN server and thought I'd
post a question to the Mikrotik Forums. (I will post it here too later).
However, having joined the forums, I found that the post I wrote was not able to be
published until a Mod approved it, perfectly normal for a new poster to avoid spam. The
problem is that no Mods appear to have looked at it for days, even when I reported my
own post asking for a Mod review and publish.
My question is whether this delay is normal for the Mikrotik Forums or whether it
indicates some sort of problem?
9 Comentarios Compartir Guardar Ocultar Reportar
Publicado por u/moneypython hace 3 días
https://www.reddit.com/r/mikrotik/comments/52egpa/queue_tree_qos_using_multiple_interfaces/ 6/13
29/10/21 22:07 Queue Tree / QoS - Using multiple interfaces : mikrotik
5 How to port forward from routers IP to sub network address
r/mikrotik
Busca en Reddit Iniciar sesión Regístrate
My router is behind NAT and it has IP address 192.168.1.198 and I have my raspberry pi
web server running on IP 192.168.2.97:5005 how to define forwarding rules to be able to
access my RPI web server on routers address 192.168.1.198:5005?
This is regardless my prev post and problem that I'm struggling with:
https://www.reddit.com/r/mikrotik/comments/qgbr3n/got_my_first_mikrotik_router_rb75
0gr3_hex_and/
UPDATE:
Thank you all for help I finally figured out the problem. After many tries to get a hold my
ISP customer service I finally talked to them and what happened is that their port
forwarding was done on the different IP (i think non static one) 192 168 1 199 which was
11 Comentarios Compartir
Guardar Ocultar Reportar
Publicado por u/tommyd2 hace 3 días
5 What is wrong with Routerboard firmware upgrades recently?
This week I've bricked and had to netinstall few RB2011, one 3011 and a CCR1036 just by
upgrading to latest long-term/stable RouterOS and upgrading firmware after that. The
last one I did using serial console so I had more information what is going on.
RouterBOOT booter 6.48.5
CCR1036-8G-2S+
CPU frequency: 1200 MHz
Memory size: 4096 MiB
NAND size: 1024 MiB
Press any key within 2 seconds to enter setup..
20 Comentarios Compartir
Guardar Ocultar Reportar
https://www.reddit.com/r/mikrotik/comments/52egpa/queue_tree_qos_using_multiple_interfaces/ 7/13
29/10/21 22:07 Queue Tree / QoS - Using multiple interfaces : mikrotik
Publicado por u/datanut hace 4 días
r/mikrotik
Busca en Reddit Iniciar sesión Regístrate
5 hap ac lite as WiFi Client
Any chance of pointing me toward a guide to configure hap as a NAT router where WiFi is
the “wan” link?
9 Comentarios Compartir Guardar Ocultar Reportar
Publicado por u/_EuroTrash_ hace 1 día
4 Woobm-USB and CHR
Hi, if one maps the USB port of the hypervisor to a virtual USB port, is it possible to use
Woobm-USB on a CHR VM?
9 Comentarios Compartir
Guardar Ocultar Reportar
https://www.reddit.com/r/mikrotik/comments/52egpa/queue_tree_qos_using_multiple_interfaces/ 8/13
29/10/21 22:07 Queue Tree / QoS - Using multiple interfaces : mikrotik
r/mikrotik Busca en Reddit Iniciar sesión Regístrate
https://www.reddit.com/r/mikrotik/comments/52egpa/queue_tree_qos_using_multiple_interfaces/ 9/13
29/10/21 22:07 Queue Tree / QoS - Using multiple interfaces : mikrotik
r/mikrotik Busca en Reddit Iniciar sesión Regístrate
https://www.reddit.com/r/mikrotik/comments/52egpa/queue_tree_qos_using_multiple_interfaces/ 10/13
29/10/21 22:07 Queue Tree / QoS - Using multiple interfaces : mikrotik
r/mikrotik Busca en Reddit Iniciar sesión Regístrate
https://www.reddit.com/r/mikrotik/comments/52egpa/queue_tree_qos_using_multiple_interfaces/ 11/13
29/10/21 22:07 Queue Tree / QoS - Using multiple interfaces : mikrotik
r/mikrotik Busca en Reddit Iniciar sesión Regístrate
https://www.reddit.com/r/mikrotik/comments/52egpa/queue_tree_qos_using_multiple_interfaces/ 12/13
29/10/21 22:07 Queue Tree / QoS - Using multiple interfaces : mikrotik
r/mikrotik Busca en Reddit Iniciar sesión Regístrate
Continuar navegando en r/mikrotik
https://www.reddit.com/r/mikrotik/comments/52egpa/queue_tree_qos_using_multiple_interfaces/ 13/13
