Sunday, May 23, 2021, 10:39 PM

PAGE NO. 1

****************************************************
* *
* STAAD.Pro V8i SELECTseries6 *
* Version 20.07.11.33 *
* Proprietary Program of *
* Bentley Systems, Inc. *
* Date= MAY 23, 2021 *
* Time= 22:37:54 *
* *
* USER ID: *
****************************************************

1. STAAD SPACE
INPUT FILE: H:\STAAD FILES\STRUCTURAL\PROPOSED ONE STOREY BUILDING.STD
2. START JOB INFORMATION
3. ENGINEER DATE 23-MAY-21
4. JOB NAME PROPOSED ONE STOREY BUILDING
5. ENGINEER NAME ENGR. PART
6. END JOB INFORMATION
7. INPUT WIDTH 79
8. UNIT METER KN
9. JOINT COORDINATES
10. 1 0 0 0; 2 3 0 0; 3 6 0 0; 4 0 0 4; 5 3 0 4; 6 0 0 7; 7 3 0 7; 8 6 0 3.15
11. 9 6 0 6.3; 10 9 0 0; 11 12 0 0; 12 9 0 4; 13 12 0 4; 14 9 0 7; 15 12 0 7
12. 16 0 4.2 0; 17 3 4.2 0; 18 6 4.2 0; 19 0 4.2 4; 20 3 4.2 4; 21 0 4.2 7
13. 22 3 4.2 7; 23 6 4.2 3.15; 24 6 4.2 6.3; 25 9 4.2 0; 26 12 4.2 0; 27 9 4.2 4
14. 28 12 4.2 4; 29 9 4.2 7; 30 12 4.2 7; 31 3 4.2 6.3; 32 9 4.2 6.3
15. MEMBER INCIDENCES
16. 1 1 16; 2 2 17; 3 3 18; 4 4 19; 5 5 20; 6 6 21; 7 7 22; 8 8 23; 9 9 24
17. 10 10 25; 11 11 26; 12 12 27; 13 13 28; 14 14 29; 15 15 30; 16 16 19; 17 19 21
18. 18 16 17; 19 17 18; 20 18 25; 21 25 26; 22 17 20; 23 20 31; 24 21 22; 25 18 23
19. 26 23 24; 27 25 27; 28 27 32; 29 26 28; 30 28 30; 31 31 22; 32 32 29; 33 31 24
20. 34 24 32; 35 29 30
21. DEFINE MATERIAL START
22. ISOTROPIC CONCRETE
23. E 2.17185E+007
24. POISSON 0.17
25. DENSITY 23.5616
26. ALPHA 1E-005
27. DAMP 0.05
28. TYPE CONCRETE
29. STRENGTH FCU 27579
30. ISOTROPIC STEEL
31. E 2.05E+008
32. POISSON 0.3
33. DENSITY 76.8195
34. ALPHA 1.2E-005
35. DAMP 0.03
36. TYPE STEEL
37. STRENGTH FY 253200 FU 407800 RY 1.5 RT 1.2
38. END DEFINE MATERIAL

H:\STAAD FILES\STRUCTURAL\PROPOSED ONE STOREY BUILDING.anl Page 1 of 52

 Sunday, May 23, 2021, 10:39 PM
STAAD SPACE -- PAGE NO. 2

39. MEMBER PROPERTY AMERICAN

40. 3 8 9 PRIS YD 0.25 ZD 0.25
41. 1 2 4 TO 7 10 TO 15 PRIS YD 0.15 ZD 0.25
42. 24 31 TO 35 PRIS YD 0.3 ZD 0.175
43. MEMBER PROPERTY AMERICAN
44. 16 TO 23 25 TO 30 TABLE D C3X6 SP 0.01
45. CONSTANTS
46. MATERIAL CONCRETE MEMB 1 TO 15 24 31 TO 35
47. MATERIAL STEEL MEMB 16 TO 23 25 TO 30
48. SUPPORTS
49. 1 TO 15 PINNED
50. DEFINE REFERENCE LOADS
51. LOAD R1 LOADTYPE DEAD TITLE REF LOAD CASE 1
52. SELFWEIGHT Y 1
53. MEMBER LOAD
54. 16 TO 35 UNI GY 0.8
55. END DEFINE REFERENCE LOADS
56. FLOOR DIAPHRAGM
57. DIA 1 TYPE RIG HEI 4.2 JOINT 16 TO 32

*** NOTE: NEITHER "MASS" NOR "GRAVITY" REFERENCE LOADTYPE IS PRESENT.

MASS MODEL IS FORMED BY COMBINING ALL "DEAD" AND "LIVE" (IF ANY) REFERENCE LOADTYPES.

*** NOTE: MASS MODEL FORMED WILL BE USED IN SEISMIC/RESPONSE/TIME HISTORY LOADING, IF ANY.
IF MASS MODEL IS SEPARATELY PROVIDED IN INDIVIDUAL LOADING, THE GENERATED MASS
WILL BE REPLACED BY THE MASS PROVIDED IN INDIVIDUAL LOADING.

************************************************************************************

FLOOR DIAPHRAGM UNIT - KN METE

--------------- ----------------

NO. TYPE FL. LEVEL FL. WT CENTRE OF MASS MASTER JOINT NO.
X Z

1 RIGID 4.200 102.59 6.000 3.881 33

************************************************************************************

59. DEFINE UBC LOAD

60. ZONE 0.04 I 1 RWX 8.5 RWZ 8.5 STYP 4 CT 0.0731 NA 1 NV 1
61. REFERENCE LOAD Y

*** NOTE: SEISMIC WEIGHT TABLE IS PRESENT.THIS WEIGHT TABLE

WILL BE CONSIDERED IN STATIC SEISMIC ANALYSIS.

62. R1 1.0
63. CHECK SOFT STORY ASCE7

H:\STAAD FILES\STRUCTURAL\PROPOSED ONE STOREY BUILDING.anl Page 2 of 52

 Sunday, May 23, 2021, 10:39 PM
STAAD SPACE -- PAGE NO. 3

64. LOAD 1 LOADTYPE SEISMIC TITLE EX

65. UBC LOAD X 1 DEC 1 ACC 0.05
66. PERFORM ANALYSIS

P R O B L E M S T A T I S T I C S
-----------------------------------

NUMBER OF JOINTS 33 NUMBER OF MEMBERS 35

NUMBER OF PLATES 0 NUMBER OF SOLIDS 0
NUMBER OF SURFACES 0 NUMBER OF SUPPORTS 15

SOLVER USED IS THE OUT-OF-CORE BASIC SOLVER

ORIGINAL/FINAL BAND-WIDTH= 15/ 6/ 102 DOF

TOTAL PRIMARY LOAD CASES = 1, TOTAL DEGREES OF FREEDOM = 102
TOTAL LOAD COMBINATION CASES = 0 SO FAR.
SIZE OF STIFFNESS MATRIX = 11 DOUBLE KILO-WORDS
REQRD/AVAIL. DISK SPACE = 12.2/ 686340.4 MB

VERTICAL STRUCTURAL IRREGULARITIES : SOFT STORY CHECK - ASCE/SEI 7-05

-------- ---------- --------------

STORY FL. LEVEL IN METE S T A T U S

----- ----------------- --------------------
X Z

1 4.20 OK OK

NOTE : NO SOFT STOREY IS DETECTED.

H:\STAAD FILES\STRUCTURAL\PROPOSED ONE STOREY BUILDING.anl Page 3 of 52

 Sunday, May 23, 2021, 10:39 PM
STAAD SPACE -- PAGE NO. 4

***********************************************************
* *
* X DIRECTION : Ta = 0.214 Tb = 0.821 Tuser = 0.000 *
* T = 0.214, LOAD FACTOR = 1.000 *
* UBC TYPE = 97 *
* UBC FACTOR V = 0.0353 x 134.13 = 4.73 KN *
* *
***********************************************************

************************************************************************

***NOTE: SEISMIC LOAD IS ACTING AT CENTER OF MASS FOR RIGID DIAPHRAGM.

TORSION FROM STATIC ECCENTRICITY (esi) IS INCLUDED IN ANALYSIS.
DYNAMIC ECCENTRICITY APPLIED = DEC - 1

LOAD NO.: 1 DIRECTION : X UNIT - METE

STORY LEVEL DYN. ECC. (dec) ACC. ECC. (aec) DESIGN ECC.
----- ----- --------------- --------------- ---------------
X Z X Z X Z
dec + aec dec + aec

1 4.20 0.00 0.00 0.60 0.35 0.00 0.35

************************************************************************

67. CHANGE
68. LOAD 2 LOADTYPE SEISMIC TITLE EZ
69. UBC LOAD Z 1 DEC 1 ACC 0.05
70. PERFORM ANALYSIS

H:\STAAD FILES\STRUCTURAL\PROPOSED ONE STOREY BUILDING.anl Page 4 of 52

 Sunday, May 23, 2021, 10:39 PM
STAAD SPACE -- PAGE NO. 5

VERTICAL STRUCTURAL IRREGULARITIES : SOFT STORY CHECK - ASCE/SEI 7-05

-------- ---------- --------------

STORY FL. LEVEL IN METE S T A T U S

----- ----------------- --------------------
X Z

1 4.20 OK OK

NOTE : NO SOFT STOREY IS DETECTED.

***********************************************************
* *
* Z DIRECTION : Ta = 0.214 Tb = 0.779 Tuser = 0.000 *
* T = 0.214, LOAD FACTOR = 1.000 *
* UBC TYPE = 97 *
* UBC FACTOR V = 0.0353 x 134.13 = 4.73 KN *
* *
***********************************************************

************************************************************************

***NOTE: SEISMIC LOAD IS ACTING AT CENTER OF MASS FOR RIGID DIAPHRAGM.

TORSION FROM STATIC ECCENTRICITY (esi) IS INCLUDED IN ANALYSIS.
DYNAMIC ECCENTRICITY APPLIED = DEC - 1

LOAD NO.: 2 DIRECTION : Z UNIT - METE

STORY LEVEL DYN. ECC. (dec) ACC. ECC. (aec) DESIGN ECC.
----- ----- --------------- --------------- ---------------
X Z X Z X Z
dec + aec dec + aec

1 4.20 0.00 0.00 0.60 0.35 0.60 0.00

************************************************************************

H:\STAAD FILES\STRUCTURAL\PROPOSED ONE STOREY BUILDING.anl Page 5 of 52

 Sunday, May 23, 2021, 10:39 PM
STAAD SPACE -- PAGE NO. 6

71. CHANGE
72. LOAD 3 LOADTYPE DEAD TITLE DL
73. REFERENCE LOAD
74. R1 -1.0
75. LOAD 4 LOADTYPE LIVE TITLE LL
76. MEMBER LOAD
77. 16 TO 35 UNI GY -0.6
78. LOAD COMB 100 1.4(DL1+DL2)
79. 3 1.4 4 1.4
80. LOAD COMB 101 1.2(DL1+DL2)+1.6(LL1+LL2)+0.5LLR
81. 3 1.2 4 1.2
82. LOAD COMB 102 1.2(DL1+DL2)+1.6LLR+0.5LL1+1.0LL2
83. 3 1.2 4 1.2
84. LOAD COMB 103 1.42(DL1+DL2)+0.5LL1+0.5LLR+1.0LL2+1.0EX+0.3EZ
85. 1 1.0 2 0.3 3 1.42 4 1.42
86. LOAD COMB 104 1.42(DL1+DL2)+0.5LL1+0.5LLR+1.0LL2+1.0EX-0.3EZ
87. 1 1.0 2 -0.3 3 1.42 4 1.42
88. LOAD COMB 105 1.42(DL1+DL2)+0.5LL1+0.5LLR+1.0LL2-1.0EX+0.3EZ
89. 1 -1.0 2 0.3 3 1.42 4 1.42
90. LOAD COMB 106 1.42(DL1+DL2)+0.5LL1+0.5LLR+1.0LL2-1.0EX-0.3EZ
91. 1 -1.0 2 -0.3 3 1.42 4 1.42
92. LOAD COMB 107 1.42(DL1+DL2)+0.5LL1+0.5LLR+1.0LL2+1.0EZ+0.3XZ
93. 1 0.3 2 1.0 3 1.42 4 1.42
94. LOAD COMB 108 1.42(DL1+DL2)+0.5LL1+0.5LLR+1.0LL2+1.0EZ-0.3X
95. 1 -0.3 2 1.0 3 1.42 4 1.42
96. LOAD COMB 109 1.42(DL1+DL2)+0.5LL1+0.5LLR+1.0LL2-1.0EZ+0.3X
97. 1 0.3 2 -1.0 3 1.42 4 1.42
98. LOAD COMB 110 1.42(DL1+DL2)+0.5LL1+0.5LLR+1.0LL2-1.0EZ-0.3X
99. 1 -1.0 2 -0.3 3 1.42 4 1.42
100. LOAD COMB 112 1.12(DL1+DL2)1.0EX+0.3EZ
101. 1 1.0 2 0.3 3 1.12 4 1.12
102. LOAD COMB 113 1.12(DL1+DL2)1.0EX-0.3EZ
103. 1 1.0 2 -0.3 3 1.12 4 1.12
104. LOAD COMB 114 1.12(DL1+DL2)-1.0EX+0.3EZ
105. 1 -1.0 2 0.3 3 1.12 4 1.12
106. LOAD COMB 115 1.12(DL1+DL2)-1.0EX-0.3EZ
107. 1 -1.0 2 -0.3 3 1.12 4 1.12
108. LOAD COMB 116 1.12(DL1+DL2)+1.0EZ+0.3EX
109. 1 0.3 2 1.0 3 1.12 4 1.12
110. LOAD COMB 117 1.12(DL1+DL2)+1.0EZ-0.3EX
111. 1 0.3 2 1.0 3 1.12 4 1.12
112. LOAD COMB 118 1.12(DL1+DL2)-1.0EZ+0.3EX
113. 1 0.3 2 -1.0 3 1.12 4 1.12
114. LOAD COMB 119 1.12(DL1+DL2)+1.0EZ-0.3EX
115. 1 -0.3 2 -1.0 3 1.12 4 1.12
116. LOAD COMB 120 0.68(DL1+DL2)+1.0EX+0.3EZ
117. 1 1.0 2 0.3 3 0.68 4 0.68
118. LOAD COMB 121 0.68(DL1+DL2)+1.0EX-0.3EZ
119. 1 1.0 2 -0.3 3 0.68 4 0.68
120. LOAD COMB 122 0.68(DL1+DL2)-1.0EX+0.3EZ
121. 1 -1.0 2 0.3 3 0.68 4 0.68
122. LOAD COMB 123 0.68(DL1+DL2)-1.0EX-0.3EZ
123. 1 -1.0 2 -0.3 3 0.68 4 0.68
124. LOAD COMB 124 0.68(DL1+DL2)+1.0EZ+0.3EX
125. 1 0.3 2 1.0 3 0.68 4 0.68
126. LOAD COMB 125 0.68(DL1+DL2)+1.0EZ-0.3EZ

H:\STAAD FILES\STRUCTURAL\PROPOSED ONE STOREY BUILDING.anl Page 6 of 52

 Sunday, May 23, 2021, 10:39 PM
STAAD SPACE -- PAGE NO. 7

127. 1 -0.3 2 1.0 3 0.68 4 0.68

128. LOAD COMB 126 0.68(DL1+DL2)-1.0EZ+0.3EX
129. 1 0.3 2 -1.0 3 0.68 4 0.68
130. LOAD COMB 127 0.68(DL1+DL2)-1.0EZ-0.3EX
131. 1 -0.3 2 -1.0 3 0.68 4 0.68
132. LOAD COMB 201 1.2(DL1+DL2)+0.5LL1+0.5LLR+1.0LL2+1.0EX+0.3EZ
133. 1 1.0 2 0.3 3 1.2 4 1.2
134. LOAD COMB 202 1.2(DL1+DL2)+0.5LL1+0.5LLR+1.0LL2+1.0EX-0.3EZ
135. 1 1.0 2 -0.3 3 1.2 4 1.2
136. LOAD COMB 203 1.2(DL1+DL2)+0.5LL1+0.5LLR+1.0LL2-1.0EX+0.3EZ
137. 1 -1.0 2 0.3 3 1.2 4 1.2
138. LOAD COMB 204 1.2(DL1+DL2)+0.5LL1+0.5LLR+1.0LL2-1.0EX-0.3EZ
139. 1 -1.0 2 -0.3 3 1.2 4 1.2
140. LOAD COMB 205 1.2(DL1+DL2)+0.5LL1+0.5LLR+1.0LL2+1.0EZ+0.3EX
141. 1 0.3 2 1.0 3 1.2 4 1.2
142. LOAD COMB 206 1.2(DL1+DL2)+0.5LL1+0.5LLR+1.0LL2+1.0EZ-0.3EX
143. 1 -0.3 2 1.0 3 1.2 4 1.2
144. LOAD COMB 207 1.2(DL1+DL2)+0.5LL1+0.5LLR+1.0LL2-1.0EZ+0.3EX
145. 1 0.3 2 -1.0 3 1.2 4 1.2
146. LOAD COMB 208 1.2(DL1+DL2)+0.5LL1+0.5LLR+1.0LL2-1.0EZ-0.3EX
147. 1 -0.3 2 -1.0 3 1.2 4 1.2
148. LOAD COMB 209 0.9(DL1+DL2)+1.0EX+0.3EZ
149. 1 1.0 2 0.3 3 0.9 4 0.9
150. LOAD COMB 210 0.9(DL1+DL2)+1.0EX+0.3EZ
151. 1 1.0 2 -0.3 3 0.9 4 0.9
152. LOAD COMB 211 0.9(DL1+DL2)-1.0EX+0.3EZ
153. 1 -1.0 2 0.3 3 0.9 4 0.9
154. LOAD COMB 212 0.9(DL1+DL2)-1.0EX-0.3EZ
155. 1 -1.0 2 -0.3 3 0.9 4 0.9
156. LOAD COMB 213 0.9(DL1+DL2)+1.0EZ+0.3EX
157. 1 0.3 2 1.0 3 0.9 4 0.9
158. LOAD COMB 214 0.9(DL1+DL2)+1.0EZ-0.3EX
159. 1 -0.3 2 1.0 3 0.9 4 0.9
160. LOAD COMB 215 0.9(DL1+DL2)-1.0EZ+0.3EX
161. 1 0.3 2 -1.0 3 0.9 4 0.9
162. LOAD COMB 216 0.9(DL1+DL2)-1.0EZ-0.3EX
163. 1 -0.3 2 -1.0 3 0.9 4 0.9
164. LOAD COMB 301 1.0(DL1+DL2)+1.0(LL1+LL2+LLR)
165. 3 1.0 4 1.0
166. LOAD COMB 302 1.0(DL1+DL2)+0.75(LL1+LL2+LLR)+0.535EX
167. 1 0.535 3 1.0 4 1.0
168. LOAD COMB 303 1.0(DL1+DL2)+0.75(LL1+LL2+LLR)-0.535EX
169. 1 -0.535 3 1.0 4 1.0
170. LOAD COMB 304 1.0(DL1+DL2)+0.75(LL1+LL2+LLR)+0.535EZ
171. 2 0.535 3 1.0 4 1.0
172. LOAD COMB 305 1.0(DL1+DL2)+0.75(LL1+LL2+LLR)-0.535EZ
173. 2 -0.535 3 1.0 4 1.0
174. LOAD COMB 306 0.6(DL1+DL2)+0.71EX
175. 1 0.71 3 0.6 4 0.6
176. LOAD COMB 307 0.6(DL1+DL2)-0.71EX
177. 1 -0.71 3 0.6 4 0.6
178. LOAD COMB 308 0.6(DL1+DL2)+0.71EZ
179. 2 0.71 3 0.6 4 0.6
180. LOAD COMB 309 0.6(DL1+DL2)-0.71EZ
181. 2 -0.71 3 0.6 4 0.6
182. LOAD COMB 310 1.0(DL1+DL2)+1.0(LL1+LL2+LLR)+0.71EX

H:\STAAD FILES\STRUCTURAL\PROPOSED ONE STOREY BUILDING.anl Page 7 of 52

 Sunday, May 23, 2021, 10:39 PM
STAAD SPACE -- PAGE NO. 8

183. 1 0.71 3 1.0 4 1.0

184. LOAD COMB 311 1.0(DL1+DL2)+1.0(LL1+LL2+LLR)-0.71EX
185. 1 -0.71 3 1.0 4 1.0
186. LOAD COMB 312 1.0(DL1+DL2)+1.0(LL1+LL2+LLR)+0.71EZ
187. 2 0.71 3 1.0 4 1.0
188. LOAD COMB 313 1.0(DL1+DL2)+1.0(LL1+LL2+LLR)-0.71EZ
189. 2 -0.71 3 1.0 4 1.0
190. LOAD COMB 401 1.4(DL1+DL2)
191. 3 1.4 4 1.4
192. LOAD COMB 402 1.2(DL1+DL2)1.6(LL1+LL2)+0.5LLR
193. 3 1.2 4 1.2
194. LOAD COMB 403 1.2(DL1+DL2)+1.6LLR+0.5LL1+1.0LL2
195. 3 1.2 4 1.2
196. LOAD COMB 404 1.2(DL1+DL2)+0.5(LL1+LLR)+1.0LL2+1.0EX
197. 1 1.0 3 1.2 4 1.2
198. LOAD COMB 405 1.2(DL1+DL2)+0.5(LL1+LLR)+1.0LL2-1.0EX
199. 1 -1.0 3 1.2 4 1.2
200. LOAD COMB 406 1.2(DL1+DL2)+0.5(LL1+LLR)+1.0LL2+1.0EZ
201. 2 1.0 3 1.2 4 1.2
202. LOAD COMB 407 1.2(DL1+DL2)+0.5(LL1+LLR)+1.0LL2-1.0EZ
203. 2 -1.0 3 1.2 4 1.2
204. LOAD COMB 408 0.9(DL1+DL2)+1.0EX
205. 1 1.0 3 0.9 4 0.9
206. LOAD COMB 409 0.9(DL1+DL2)-1.0EX
207. 1 -1.0 3 0.9 4 0.9
208. LOAD COMB 410 0.9(DL1+DL2)+1.0EZ
209. 2 1.0 3 0.9 4 0.9
210. LOAD COMB 411 0.9(DL1+DL2)-1.0EZ
211. 2 -1.0 3 0.9 4 0.9
212. PERFORM ANALYSIS

VERTICAL STRUCTURAL IRREGULARITIES : SOFT STORY CHECK - ASCE/SEI 7-05

-------- ---------- --------------

STORY FL. LEVEL IN METE S T A T U S

----- ----------------- --------------------
X Z

1 4.20 OK OK

NOTE : NO SOFT STOREY IS DETECTED.

213. PARAMETER 1
214. CODE AISC
215. TRACK 2 MEMB 16 TO 23 25 TO 30
216. CHECK CODE MEMB 16 TO 23 25 TO 30

H:\STAAD FILES\STRUCTURAL\PROPOSED ONE STOREY BUILDING.anl Page 8 of 52

 Sunday, May 23, 2021, 10:39 PM
STAAD SPACE -- PAGE NO. 9

H:\STAAD FILES\STRUCTURAL\PROPOSED ONE STOREY BUILDING.anl Page 9 of 52

 Sunday, May 23, 2021, 10:39 PM
STAAD SPACE -- PAGE NO. 10

STAAD.PRO CODE CHECKING - (AISC 9TH EDITION) v1.0

********************************************

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ==| |== ------------ |
|MEMBER 16 * | AISC SECTIONS | | | AX = 22.71 |
| * | D C3X6 | | | --Z AY = 11.01 |
|DESIGN CODE * | | | | AZ = 6.16 |
| AISC-1989 * =============================== ==| |== SY = 19.11 |
| * SZ = 45.23 |
| * |<---LENGTH (M)= 4.00 --->| RY = 1.96 |
|************* RZ = 2.75 |
| |
| 3.7 (KNS-METRE) |
|PARAMETER |L109 L108STRESSES |
|IN KNS CMS | IN NEWTON MMS|
|--------------- + -------------|
| KL/R-Y= 204.10 | FA = 25.34 |
| KL/R-Z= 145.21 + fa = 0.00 |
| UNL = 400.00 | L109 L108 FCZ = 148.93 |
| CB = 1.00 + FTZ = 148.93 |
| CMY = 0.85 | L108L108L109 FCY = 148.93 |
| CMZ = 0.85 + FTY = 148.93 |
| FYLD = 24.82 | L109L108 L109L108 fbz = 82.29 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 0.00 |
| DFF = 0.00 0.7 Fey = 25.34 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 50.06 |
| (KL/R)max = 204.10 (WITH LOAD NO.) FV = 99.28 |
| fv = 4.43 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 4.9 0.0 0.0 3.7 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 109 0 0 109 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H1-3 0.553 109 |
| 0.00 T 0.00 3.72 0.00 |
|* *|
|**************************************************************************|
| |

H:\STAAD FILES\STRUCTURAL\PROPOSED ONE STOREY BUILDING.anl Page 10 of 52

 Sunday, May 23, 2021, 10:39 PM
STAAD SPACE -- PAGE NO. 11

ALL UNITS ARE - KN METE (UNLESS OTHERWISE Noted)

MEMBER TABLE RESULT/ CRITICAL COND/ RATIO/ LOADING/

FX MY MZ LOCATION
=======================================================================

|--------------------------------------------------------------------------|

H:\STAAD FILES\STRUCTURAL\PROPOSED ONE STOREY BUILDING.anl Page 11 of 52

 Sunday, May 23, 2021, 10:39 PM
STAAD SPACE -- PAGE NO. 12

STAAD.PRO CODE CHECKING - (AISC 9TH EDITION) v1.0

********************************************

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ==| |== ------------ |
|MEMBER 17 * | AISC SECTIONS | | | AX = 22.71 |
| * | D C3X6 | | | --Z AY = 11.01 |
|DESIGN CODE * | | | | AZ = 6.16 |
| AISC-1989 * =============================== ==| |== SY = 19.11 |
| * SZ = 45.23 |
| * |<---LENGTH (M)= 3.00 --->| RY = 1.96 |
|************* RZ = 2.75 |
| |
| 3.2 (KNS-METRE) |
|PARAMETER |L109 STRESSES |
|IN KNS CMS | IN NEWTON MMS|
|--------------- + -------------|
| KL/R-Y= 153.07 | L109 FA = 45.05 |
| KL/R-Z= 108.91 + L108fa = 0.00 |
| UNL = 300.00 | FCZ = 148.93 |
| CB = 1.00 + L109 L108 FTZ = 148.93 |
| CMY = 0.85 | L109L109 FCY = 148.93 |
| CMZ = 0.85 + L108L109 L109 FTY = 148.93 |
| FYLD = 24.82 | L109 fbz = 69.99 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 0.00 |
| DFF = 0.00 0.4 Fey = 45.05 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 89.00 |
| (KL/R)max = 153.07 (WITH LOAD NO.) FV = 99.28 |
| fv = 3.98 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 4.4 0.0 0.0 3.2 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 109 0 0 109 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H1-3 0.470 109 |
| 0.00 T 0.00 3.17 0.00 |
|* *|
|**************************************************************************|
| |

H:\STAAD FILES\STRUCTURAL\PROPOSED ONE STOREY BUILDING.anl Page 12 of 52

 Sunday, May 23, 2021, 10:39 PM
STAAD SPACE -- PAGE NO. 13

ALL UNITS ARE - KN METE (UNLESS OTHERWISE Noted)

MEMBER TABLE RESULT/ CRITICAL COND/ RATIO/ LOADING/

FX MY MZ LOCATION
=======================================================================

|--------------------------------------------------------------------------|

H:\STAAD FILES\STRUCTURAL\PROPOSED ONE STOREY BUILDING.anl Page 13 of 52

 Sunday, May 23, 2021, 10:39 PM
STAAD SPACE -- PAGE NO. 14

STAAD.PRO CODE CHECKING - (AISC 9TH EDITION) v1.0

********************************************

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ==| |== ------------ |
|MEMBER 18 * | AISC SECTIONS | | | AX = 22.71 |
| * | D C3X6 | | | --Z AY = 11.01 |
|DESIGN CODE * | | | | AZ = 6.16 |
| AISC-1989 * =============================== ==| |== SY = 19.11 |
| * SZ = 45.23 |
| * |<---LENGTH (M)= 3.00 --->| RY = 1.96 |
|************* RZ = 2.75 |
| |
| 2.5 (KNS-METRE) |
|PARAMETER | L104STRESSES |
|IN KNS CMS | IN NEWTON MMS|
|--------------- +L105 -------------|
| KL/R-Y= 153.07 | FA = 45.05 |
| KL/R-Z= 108.91 + L104 fa = 0.00 |
| UNL = 300.00 | FCZ = 148.93 |
| CB = 1.00 + L105 L104L104 FTZ = 148.93 |
| CMY = 0.85 | L104 L105 FCY = 148.93 |
| CMZ = 0.85 + L104 L104 FTY = 148.93 |
| FYLD = 24.82 | L105 fbz = 55.42 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 0.00 |
| DFF = 0.00 0.4 Fey = 45.05 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 89.00 |
| (KL/R)max = 153.07 (WITH LOAD NO.) FV = 99.28 |
| fv = 3.67 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 4.0 0.0 0.0 2.5 |
| LOCATION 0.0 3.0 0.0 0.0 3.0 |
| LOADING 0 104 0 0 104 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H1-3 0.372 104 |
| 0.00 T 0.00 2.51 3.00 |
|* *|
|**************************************************************************|
| |

H:\STAAD FILES\STRUCTURAL\PROPOSED ONE STOREY BUILDING.anl Page 14 of 52

 Sunday, May 23, 2021, 10:39 PM
STAAD SPACE -- PAGE NO. 15

ALL UNITS ARE - KN METE (UNLESS OTHERWISE Noted)

MEMBER TABLE RESULT/ CRITICAL COND/ RATIO/ LOADING/

FX MY MZ LOCATION
=======================================================================

|--------------------------------------------------------------------------|

H:\STAAD FILES\STRUCTURAL\PROPOSED ONE STOREY BUILDING.anl Page 15 of 52

 Sunday, May 23, 2021, 10:39 PM
STAAD SPACE -- PAGE NO. 16

STAAD.PRO CODE CHECKING - (AISC 9TH EDITION) v1.0

********************************************

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ==| |== ------------ |
|MEMBER 19 * | AISC SECTIONS | | | AX = 22.71 |
| * | D C3X6 | | | --Z AY = 11.01 |
|DESIGN CODE * | | | | AZ = 6.16 |
| AISC-1989 * =============================== ==| |== SY = 19.11 |
| * SZ = 45.23 |
| * |<---LENGTH (M)= 3.00 --->| RY = 1.96 |
|************* RZ = 2.75 |
| |
| 2.6 (KNS-METRE) |
|PARAMETER | L104STRESSES |
|IN KNS CMS |L105 IN NEWTON MMS|
|--------------- + -------------|
| KL/R-Y= 153.07 | FA = 45.05 |
| KL/R-Z= 108.91 + L105 L104 fa = 0.00 |
| UNL = 300.00 | FCZ = 148.93 |
| CB = 1.00 + FTZ = 148.93 |
| CMY = 0.85 | L105L105 L104 FCY = 148.93 |
| CMZ = 0.85 + L105 L104 L105 FTY = 148.93 |
| FYLD = 24.82 | L104 fbz = 56.96 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 0.00 |
| DFF = 0.00 0.4 Fey = 45.05 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 89.00 |
| (KL/R)max = 153.07 (WITH LOAD NO.) FV = 99.28 |
| fv = 3.52 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 3.9 0.0 0.0 2.6 |
| LOCATION 0.0 0.0 0.0 0.0 3.0 |
| LOADING 0 105 0 0 104 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H1-3 0.382 104 |
| 0.00 T 0.00 2.58 3.00 |
|* *|
|**************************************************************************|
| |

H:\STAAD FILES\STRUCTURAL\PROPOSED ONE STOREY BUILDING.anl Page 16 of 52

 Sunday, May 23, 2021, 10:39 PM
STAAD SPACE -- PAGE NO. 17

ALL UNITS ARE - KN METE (UNLESS OTHERWISE Noted)

MEMBER TABLE RESULT/ CRITICAL COND/ RATIO/ LOADING/

FX MY MZ LOCATION
=======================================================================

|--------------------------------------------------------------------------|

H:\STAAD FILES\STRUCTURAL\PROPOSED ONE STOREY BUILDING.anl Page 17 of 52

 Sunday, May 23, 2021, 10:39 PM
STAAD SPACE -- PAGE NO. 18

STAAD.PRO CODE CHECKING - (AISC 9TH EDITION) v1.0

********************************************

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ==| |== ------------ |
|MEMBER 20 * | AISC SECTIONS | | | AX = 22.71 |
| * | D C3X6 | | | --Z AY = 11.01 |
|DESIGN CODE * | | | | AZ = 6.16 |
| AISC-1989 * =============================== ==| |== SY = 19.11 |
| * SZ = 45.23 |
| * |<---LENGTH (M)= 3.00 --->| RY = 1.96 |
|************* RZ = 2.75 |
| |
| 2.6 (KNS-METRE) |
|PARAMETER |L105 STRESSES |
|IN KNS CMS | L104IN NEWTON MMS|
|--------------- + -------------|
| KL/R-Y= 153.07 | FA = 45.05 |
| KL/R-Z= 108.91 + L105 L104 fa = 0.00 |
| UNL = 300.00 | FCZ = 148.93 |
| CB = 1.00 + FTZ = 148.93 |
| CMY = 0.85 | L105 L104L104 FCY = 148.93 |
| CMZ = 0.85 + L104 L105 L104 FTY = 148.93 |
| FYLD = 24.82 | L105 fbz = 56.96 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 0.00 |
| DFF = 0.00 0.4 Fey = 45.05 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 89.00 |
| (KL/R)max = 153.07 (WITH LOAD NO.) FV = 99.28 |
| fv = 3.52 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 3.9 0.0 0.0 2.6 |
| LOCATION 0.0 3.0 0.0 0.0 0.0 |
| LOADING 0 104 0 0 105 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H1-3 0.382 105 |
| 0.00 T 0.00 2.58 0.00 |
|* *|
|**************************************************************************|
| |

H:\STAAD FILES\STRUCTURAL\PROPOSED ONE STOREY BUILDING.anl Page 18 of 52

 Sunday, May 23, 2021, 10:39 PM
STAAD SPACE -- PAGE NO. 19

ALL UNITS ARE - KN METE (UNLESS OTHERWISE Noted)

MEMBER TABLE RESULT/ CRITICAL COND/ RATIO/ LOADING/

FX MY MZ LOCATION
=======================================================================

|--------------------------------------------------------------------------|

H:\STAAD FILES\STRUCTURAL\PROPOSED ONE STOREY BUILDING.anl Page 19 of 52

 Sunday, May 23, 2021, 10:39 PM
STAAD SPACE -- PAGE NO. 20

STAAD.PRO CODE CHECKING - (AISC 9TH EDITION) v1.0

********************************************

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ==| |== ------------ |
|MEMBER 21 * | AISC SECTIONS | | | AX = 22.71 |
| * | D C3X6 | | | --Z AY = 11.01 |
|DESIGN CODE * | | | | AZ = 6.16 |
| AISC-1989 * =============================== ==| |== SY = 19.11 |
| * SZ = 45.23 |
| * |<---LENGTH (M)= 3.00 --->| RY = 1.96 |
|************* RZ = 2.75 |
| |
| 2.5 (KNS-METRE) |
|PARAMETER |L105 STRESSES |
|IN KNS CMS | IN NEWTON MMS|
|--------------- + L104-------------|
| KL/R-Y= 153.07 | FA = 45.05 |
| KL/R-Z= 108.91 + L105 fa = 0.00 |
| UNL = 300.00 | FCZ = 148.93 |
| CB = 1.00 + L105L105 L104 FTZ = 148.93 |
| CMY = 0.85 | L104 L105 FCY = 148.93 |
| CMZ = 0.85 + L105 L105 FTY = 148.93 |
| FYLD = 24.82 | L104 fbz = 55.42 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 0.00 |
| DFF = 0.00 0.4 Fey = 45.05 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 89.00 |
| (KL/R)max = 153.07 (WITH LOAD NO.) FV = 99.28 |
| fv = 3.67 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 4.0 0.0 0.0 2.5 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 105 0 0 105 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H1-3 0.372 105 |
| 0.00 T 0.00 2.51 0.00 |
|* *|
|**************************************************************************|
| |

H:\STAAD FILES\STRUCTURAL\PROPOSED ONE STOREY BUILDING.anl Page 20 of 52

 Sunday, May 23, 2021, 10:39 PM
STAAD SPACE -- PAGE NO. 21

ALL UNITS ARE - KN METE (UNLESS OTHERWISE Noted)

MEMBER TABLE RESULT/ CRITICAL COND/ RATIO/ LOADING/

FX MY MZ LOCATION
=======================================================================

|--------------------------------------------------------------------------|

H:\STAAD FILES\STRUCTURAL\PROPOSED ONE STOREY BUILDING.anl Page 21 of 52

 Sunday, May 23, 2021, 10:39 PM
STAAD SPACE -- PAGE NO. 22

STAAD.PRO CODE CHECKING - (AISC 9TH EDITION) v1.0

********************************************

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ==| |== ------------ |
|MEMBER 22 * | AISC SECTIONS | | | AX = 22.71 |
| * | D C3X6 | | | --Z AY = 11.01 |
|DESIGN CODE * | | | | AZ = 6.16 |
| AISC-1989 * =============================== ==| |== SY = 19.11 |
| * SZ = 45.23 |
| * |<---LENGTH (M)= 4.00 --->| RY = 1.96 |
|************* RZ = 2.75 |
| |
| 3.6 (KNS-METRE) |
|PARAMETER |L109 L108STRESSES |
|IN KNS CMS | IN NEWTON MMS|
|--------------- + -------------|
| KL/R-Y= 204.10 | FA = 25.34 |
| KL/R-Z= 145.21 + fa = 0.00 |
| UNL = 400.00 | L109 L108 FCZ = 148.93 |
| CB = 1.00 + L108L107 FTZ = 148.93 |
| CMY = 0.85 | L109 FCY = 148.93 |
| CMZ = 0.85 + FTY = 148.93 |
| FYLD = 24.82 | L109L108 L109L108 fbz = 80.50 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 0.00 |
| DFF = 0.00 0.6 Fey = 25.34 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 50.06 |
| (KL/R)max = 204.10 (WITH LOAD NO.) FV = 99.28 |
| fv = 4.39 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 4.8 0.0 0.0 3.6 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 109 0 0 109 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H1-3 0.541 109 |
| 0.00 T 0.00 3.64 0.00 |
|* *|
|**************************************************************************|
| |

H:\STAAD FILES\STRUCTURAL\PROPOSED ONE STOREY BUILDING.anl Page 22 of 52

 Sunday, May 23, 2021, 10:39 PM
STAAD SPACE -- PAGE NO. 23

ALL UNITS ARE - KN METE (UNLESS OTHERWISE Noted)

MEMBER TABLE RESULT/ CRITICAL COND/ RATIO/ LOADING/

FX MY MZ LOCATION
=======================================================================

|--------------------------------------------------------------------------|

H:\STAAD FILES\STRUCTURAL\PROPOSED ONE STOREY BUILDING.anl Page 23 of 52

 Sunday, May 23, 2021, 10:39 PM
STAAD SPACE -- PAGE NO. 24

STAAD.PRO CODE CHECKING - (AISC 9TH EDITION) v1.0

********************************************

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ==| |== ------------ |
|MEMBER 23 * | AISC SECTIONS | | | AX = 22.71 |
| * | D C3X6 | | | --Z AY = 11.01 |
|DESIGN CODE * | | | | AZ = 6.16 |
| AISC-1989 * =============================== ==| |== SY = 19.11 |
| * SZ = 45.23 |
| * |<---LENGTH (M)= 2.30 --->| RY = 1.96 |
|************* RZ = 2.75 |
| |
| 3.5 (KNS-METRE) |
|PARAMETER |L109 STRESSES |
|IN KNS CMS | IN NEWTON MMS|
|--------------- + -------------|
| KL/R-Y= 117.36 | L109 FA = 74.89 |
| KL/R-Z= 83.50 + fa = 0.00 |
| UNL = 230.00 | L109 FCZ = 148.93 |
| CB = 1.00 + L109L109L109L109FTZ = 148.93 |
| CMY = 0.85 | L109 L109 FCY = 148.93 |
| CMZ = 0.85 + FTY = 148.93 |
| FYLD = 24.82 | L108L105 fbz = 76.68 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 0.00 |
| DFF = 0.00 0.4 Fey = 76.65 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 151.42 |
| (KL/R)max = 117.36 (WITH LOAD NO.) FV = 99.28 |
| fv = 4.37 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 4.8 0.0 0.0 3.5 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 109 0 0 109 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H1-3 0.515 109 |
| 0.00 T 0.00 3.47 0.00 |
|* *|
|**************************************************************************|
| |

H:\STAAD FILES\STRUCTURAL\PROPOSED ONE STOREY BUILDING.anl Page 24 of 52

 Sunday, May 23, 2021, 10:39 PM
STAAD SPACE -- PAGE NO. 25

ALL UNITS ARE - KN METE (UNLESS OTHERWISE Noted)

MEMBER TABLE RESULT/ CRITICAL COND/ RATIO/ LOADING/

FX MY MZ LOCATION
=======================================================================

|--------------------------------------------------------------------------|

H:\STAAD FILES\STRUCTURAL\PROPOSED ONE STOREY BUILDING.anl Page 25 of 52

 Sunday, May 23, 2021, 10:39 PM
STAAD SPACE -- PAGE NO. 26

STAAD.PRO CODE CHECKING - (AISC 9TH EDITION) v1.0

********************************************

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ==| |== ------------ |
|MEMBER 25 * | AISC SECTIONS | | | AX = 22.71 |
| * | D C3X6 | | | --Z AY = 11.01 |
|DESIGN CODE * | | | | AZ = 6.16 |
| AISC-1989 * =============================== ==| |== SY = 19.11 |
| * SZ = 45.23 |
| * |<---LENGTH (M)= 3.15 --->| RY = 1.96 |
|************* RZ = 2.75 |
| |
| 2.9 (KNS-METRE) |
|PARAMETER |L109 STRESSES |
|IN KNS CMS | L107IN NEWTON MMS|
|--------------- + -------------|
| KL/R-Y= 160.73 | FA = 40.86 |
| KL/R-Z= 114.35 + L109 fa = 0.00 |
| UNL = 315.00 | L107 FCZ = 148.93 |
| CB = 1.00 + FTZ = 148.93 |
| CMY = 0.85 | FCY = 148.93 |
| CMZ = 0.85 + L109 L107L107L109 FTY = 148.93 |
| FYLD = 24.82 | L107 L109L107 fbz = 63.40 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 0.00 |
| DFF = 0.00 0.6 Fey = 40.86 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 80.73 |
| (KL/R)max = 160.73 (WITH LOAD NO.) FV = 99.28 |
| fv = 3.79 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 4.2 0.0 0.0 2.9 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 109 0 0 109 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H1-3 0.426 109 |
| 0.00 T 0.00 2.87 0.00 |
|* *|
|**************************************************************************|
| |

H:\STAAD FILES\STRUCTURAL\PROPOSED ONE STOREY BUILDING.anl Page 26 of 52

 Sunday, May 23, 2021, 10:39 PM
STAAD SPACE -- PAGE NO. 27

ALL UNITS ARE - KN METE (UNLESS OTHERWISE Noted)

MEMBER TABLE RESULT/ CRITICAL COND/ RATIO/ LOADING/

FX MY MZ LOCATION
=======================================================================

|--------------------------------------------------------------------------|

H:\STAAD FILES\STRUCTURAL\PROPOSED ONE STOREY BUILDING.anl Page 27 of 52

 Sunday, May 23, 2021, 10:39 PM
STAAD SPACE -- PAGE NO. 28

STAAD.PRO CODE CHECKING - (AISC 9TH EDITION) v1.0

********************************************

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ==| |== ------------ |
|MEMBER 26 * | AISC SECTIONS | | | AX = 22.71 |
| * | D C3X6 | | | --Z AY = 11.01 |
|DESIGN CODE * | | | | AZ = 6.16 |
| AISC-1989 * =============================== ==| |== SY = 19.11 |
| * SZ = 45.23 |
| * |<---LENGTH (M)= 3.15 --->| RY = 1.96 |
|************* RZ = 2.75 |
| |
| 3.1 (KNS-METRE) |
|PARAMETER |L109 STRESSES |
|IN KNS CMS | IN NEWTON MMS|
|--------------- + -------------|
| KL/R-Y= 160.73 | L107FA = 40.86 |
| KL/R-Z= 114.35 + L109 fa = 0.00 |
| UNL = 315.00 | FCZ = 148.93 |
| CB = 1.00 + L107 FTZ = 148.93 |
| CMY = 0.85 | L109 L107L109L109 FCY = 148.93 |
| CMZ = 0.85 + L109 FTY = 148.93 |
| FYLD = 24.82 | L107 L109 fbz = 67.80 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 0.00 |
| DFF = 0.00 0.4 Fey = 40.86 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 80.73 |
| (KL/R)max = 160.73 (WITH LOAD NO.) FV = 99.28 |
| fv = 3.94 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 4.3 0.0 0.0 3.1 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 109 0 0 109 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H1-3 0.455 109 |
| 0.00 T 0.00 3.07 0.00 |
|* *|
|**************************************************************************|
| |

H:\STAAD FILES\STRUCTURAL\PROPOSED ONE STOREY BUILDING.anl Page 28 of 52

 Sunday, May 23, 2021, 10:39 PM
STAAD SPACE -- PAGE NO. 29

ALL UNITS ARE - KN METE (UNLESS OTHERWISE Noted)

MEMBER TABLE RESULT/ CRITICAL COND/ RATIO/ LOADING/

FX MY MZ LOCATION
=======================================================================

|--------------------------------------------------------------------------|

H:\STAAD FILES\STRUCTURAL\PROPOSED ONE STOREY BUILDING.anl Page 29 of 52

 Sunday, May 23, 2021, 10:39 PM
STAAD SPACE -- PAGE NO. 30

STAAD.PRO CODE CHECKING - (AISC 9TH EDITION) v1.0

********************************************

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ==| |== ------------ |
|MEMBER 27 * | AISC SECTIONS | | | AX = 22.71 |
| * | D C3X6 | | | --Z AY = 11.01 |
|DESIGN CODE * | | | | AZ = 6.16 |
| AISC-1989 * =============================== ==| |== SY = 19.11 |
| * SZ = 45.23 |
| * |<---LENGTH (M)= 4.00 --->| RY = 1.96 |
|************* RZ = 2.75 |
| |
| 3.5 (KNS-METRE) |
|PARAMETER |L109 L107STRESSES |
|IN KNS CMS | IN NEWTON MMS|
|--------------- + -------------|
| KL/R-Y= 204.10 | FA = 25.34 |
| KL/R-Z= 145.21 + fa = 0.00 |
| UNL = 400.00 | L109 L107 FCZ = 148.93 |
| CB = 1.00 + L107L108L109 FTZ = 148.93 |
| CMY = 0.85 | FCY = 148.93 |
| CMZ = 0.85 + FTY = 148.93 |
| FYLD = 24.82 | L109L107 L109L107 fbz = 77.81 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 0.00 |
| DFF = 0.00 0.6 Fey = 25.34 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 50.06 |
| (KL/R)max = 204.10 (WITH LOAD NO.) FV = 99.28 |
| fv = 4.34 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 4.8 0.0 0.0 3.5 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 109 0 0 109 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H1-3 0.522 109 |
| 0.00 T 0.00 3.52 0.00 |
|* *|
|**************************************************************************|
| |

H:\STAAD FILES\STRUCTURAL\PROPOSED ONE STOREY BUILDING.anl Page 30 of 52

 Sunday, May 23, 2021, 10:39 PM
STAAD SPACE -- PAGE NO. 31

ALL UNITS ARE - KN METE (UNLESS OTHERWISE Noted)

MEMBER TABLE RESULT/ CRITICAL COND/ RATIO/ LOADING/

FX MY MZ LOCATION
=======================================================================

|--------------------------------------------------------------------------|

H:\STAAD FILES\STRUCTURAL\PROPOSED ONE STOREY BUILDING.anl Page 31 of 52

 Sunday, May 23, 2021, 10:39 PM
STAAD SPACE -- PAGE NO. 32

STAAD.PRO CODE CHECKING - (AISC 9TH EDITION) v1.0

********************************************

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ==| |== ------------ |
|MEMBER 28 * | AISC SECTIONS | | | AX = 22.71 |
| * | D C3X6 | | | --Z AY = 11.01 |
|DESIGN CODE * | | | | AZ = 6.16 |
| AISC-1989 * =============================== ==| |== SY = 19.11 |
| * SZ = 45.23 |
| * |<---LENGTH (M)= 2.30 --->| RY = 1.96 |
|************* RZ = 2.75 |
| |
| 3.3 (KNS-METRE) |
|PARAMETER |L109 STRESSES |
|IN KNS CMS | IN NEWTON MMS|
|--------------- + -------------|
| KL/R-Y= 117.36 | L109 FA = 74.89 |
| KL/R-Z= 83.50 + fa = 0.00 |
| UNL = 230.00 | L109 FCZ = 148.93 |
| CB = 1.00 + L109L109L109L109FTZ = 148.93 |
| CMY = 0.85 | L109 FCY = 148.93 |
| CMZ = 0.85 + L109 FTY = 148.93 |
| FYLD = 24.82 | L107L103 fbz = 73.05 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 0.00 |
| DFF = 0.00 0.4 Fey = 76.65 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 151.42 |
| (KL/R)max = 117.36 (WITH LOAD NO.) FV = 99.28 |
| fv = 4.25 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 4.7 0.0 0.0 3.3 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 109 0 0 109 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H1-3 0.490 109 |
| 0.00 T 0.00 3.30 0.00 |
|* *|
|**************************************************************************|
| |

H:\STAAD FILES\STRUCTURAL\PROPOSED ONE STOREY BUILDING.anl Page 32 of 52

 Sunday, May 23, 2021, 10:39 PM
STAAD SPACE -- PAGE NO. 33

ALL UNITS ARE - KN METE (UNLESS OTHERWISE Noted)

MEMBER TABLE RESULT/ CRITICAL COND/ RATIO/ LOADING/

FX MY MZ LOCATION
=======================================================================

|--------------------------------------------------------------------------|

H:\STAAD FILES\STRUCTURAL\PROPOSED ONE STOREY BUILDING.anl Page 33 of 52

 Sunday, May 23, 2021, 10:39 PM
STAAD SPACE -- PAGE NO. 34

STAAD.PRO CODE CHECKING - (AISC 9TH EDITION) v1.0

********************************************

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ==| |== ------------ |
|MEMBER 29 * | AISC SECTIONS | | | AX = 22.71 |
| * | D C3X6 | | | --Z AY = 11.01 |
|DESIGN CODE * | | | | AZ = 6.16 |
| AISC-1989 * =============================== ==| |== SY = 19.11 |
| * SZ = 45.23 |
| * |<---LENGTH (M)= 4.00 --->| RY = 1.96 |
|************* RZ = 2.75 |
| |
| 3.5 (KNS-METRE) |
|PARAMETER |L109 L107STRESSES |
|IN KNS CMS | IN NEWTON MMS|
|--------------- + -------------|
| KL/R-Y= 204.10 | FA = 25.34 |
| KL/R-Z= 145.21 + fa = 0.00 |
| UNL = 400.00 | L109 L107 FCZ = 148.93 |
| CB = 1.00 + L107L107L109 FTZ = 148.93 |
| CMY = 0.85 | FCY = 148.93 |
| CMZ = 0.85 + FTY = 148.93 |
| FYLD = 24.82 | L109L107 L109L107 fbz = 76.85 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 0.00 |
| DFF = 0.00 0.6 Fey = 25.34 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 50.06 |
| (KL/R)max = 204.10 (WITH LOAD NO.) FV = 99.28 |
| fv = 4.32 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 4.8 0.0 0.0 3.5 |
| LOCATION 0.0 4.0 0.0 0.0 0.0 |
| LOADING 0 107 0 0 109 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H1-3 0.516 109 |
| 0.00 T 0.00 3.48 0.00 |
|* *|
|**************************************************************************|
| |

H:\STAAD FILES\STRUCTURAL\PROPOSED ONE STOREY BUILDING.anl Page 34 of 52

 Sunday, May 23, 2021, 10:39 PM
STAAD SPACE -- PAGE NO. 35

ALL UNITS ARE - KN METE (UNLESS OTHERWISE Noted)

MEMBER TABLE RESULT/ CRITICAL COND/ RATIO/ LOADING/

FX MY MZ LOCATION
=======================================================================

|--------------------------------------------------------------------------|

H:\STAAD FILES\STRUCTURAL\PROPOSED ONE STOREY BUILDING.anl Page 35 of 52

 Sunday, May 23, 2021, 10:39 PM
STAAD SPACE -- PAGE NO. 36

STAAD.PRO CODE CHECKING - (AISC 9TH EDITION) v1.0

********************************************

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CMS UNIT |
| * |=============================| ==| |== ------------ |
|MEMBER 30 * | AISC SECTIONS | | | AX = 22.71 |
| * | D C3X6 | | | --Z AY = 11.01 |
|DESIGN CODE * | | | | AZ = 6.16 |
| AISC-1989 * =============================== ==| |== SY = 19.11 |
| * SZ = 45.23 |
| * |<---LENGTH (M)= 3.00 --->| RY = 1.96 |
|************* RZ = 2.75 |
| |
| 2.9 (KNS-METRE) |
|PARAMETER |L109 STRESSES |
|IN KNS CMS | IN NEWTON MMS|
|--------------- + -------------|
| KL/R-Y= 153.07 | FA = 45.05 |
| KL/R-Z= 108.91 + L109 L107fa = 0.00 |
| UNL = 300.00 | FCZ = 148.93 |
| CB = 1.00 + FTZ = 148.93 |
| CMY = 0.85 | L109 L107L109L109L109 L107 FCY = 148.93 |
| CMZ = 0.85 + L208 FTY = 148.93 |
| FYLD = 24.82 | L208 fbz = 63.79 |
| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 0.00 |
| DFF = 0.00 0.2 Fey = 45.05 |
| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 89.00 |
| (KL/R)max = 153.07 (WITH LOAD NO.) FV = 99.28 |
| fv = 3.81 |
| |
| MAX FORCE/ MOMENT SUMMARY (KNS-METRE) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 4.2 0.0 0.0 2.9 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 0 109 0 0 109 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY (KNS-METRE) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS AISC- H1-3 0.428 109 |
| 0.00 T 0.00 2.89 0.00 |
|* *|
|**************************************************************************|
| |

H:\STAAD FILES\STRUCTURAL\PROPOSED ONE STOREY BUILDING.anl Page 36 of 52

 Sunday, May 23, 2021, 10:39 PM
STAAD SPACE -- PAGE NO. 37

ALL UNITS ARE - KN METE (UNLESS OTHERWISE Noted)

MEMBER TABLE RESULT/ CRITICAL COND/ RATIO/ LOADING/

FX MY MZ LOCATION
=======================================================================

|--------------------------------------------------------------------------|

H:\STAAD FILES\STRUCTURAL\PROPOSED ONE STOREY BUILDING.anl Page 37 of 52

 Sunday, May 23, 2021, 10:39 PM
STAAD SPACE -- PAGE NO. 38

217. START CONCRETE DESIGN

218. CODE ACI
219. FC 21000 MEMB 1 TO 15 24 31 TO 35
220. FYMAIN 230000 MEMB 1 TO 15 24 31 TO 35
221. DESIGN BEAM 24 31 TO 35

H:\STAAD FILES\STRUCTURAL\PROPOSED ONE STOREY BUILDING.anl Page 38 of 52

 Sunday, May 23, 2021, 10:39 PM
STAAD SPACE -- PAGE NO. 39

ACI 318-11 BEAM NO. 24 DESIGN RESULTS

=============================================

LEN - 3000. MM FY - 230. FC - 21. MPA, SIZE - 175. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 3000. YES YES

2 243. 2 - 12MM 0. 718. YES NO
3 243. 2 - 12MM 2157. 3000. NO YES

B E A M N O. 24 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 4.60 KNS Vc= 32.75 KNS Vs= 0.00 KNS
Tu= 0.86 KN-MET Tc= 0.8 KN-MET Ts= 1.1 KN-MET LOAD 108
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 75. MM C/C FOR 1264. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 0.95 SQ.CM.

AT END SUPPORT - Vu= 4.86 KNS Vc= 32.75 KNS Vs= 0.00 KNS
Tu= 0.86 KN-MET Tc= 0.8 KN-MET Ts= 1.1 KN-MET LOAD 108
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 75. MM C/C FOR 1264. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 0.95 SQ.CM.

___ 21J____________________ 3000X 175X 300_____________________ 22J____

| |
||================= =====================||
| 2No12 H 243.| |0.TO 718 2No12|H|243.2157.TO|3000 |
| 18*12c/c 75 | | | | | | |18*12c/c 75| | |
| 2No12 H |57.| |0.TO 3000 | | | | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oo | | oo | | | | | | oo | | oo |
| 2#12 | | 2#12 | | | | | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

H:\STAAD FILES\STRUCTURAL\PROPOSED ONE STOREY BUILDING.anl Page 39 of 52

 Sunday, May 23, 2021, 10:39 PM
STAAD SPACE -- PAGE NO. 40

ACI 318-11 BEAM NO. 31 DESIGN RESULTS

=============================================

LEN - 700. MM FY - 230. FC - 21. MPA, SIZE - 175. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 700. YES YES

2 243. 2 - 12MM 0. 700. YES YES

B E A M N O. 31 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 8.22 KNS Vc= 31.71 KNS Vs= 0.00 KNS
Tu= 1.37 KN-MET Tc= 0.8 KN-MET Ts= 1.8 KN-MET LOAD 108
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 75. MM C/C FOR 113. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 1.51 SQ.CM.

AT END SUPPORT - Vu= 9.07 KNS Vc= 31.38 KNS Vs= 0.00 KNS
Tu= 1.37 KN-MET Tc= 0.8 KN-MET Ts= 1.8 KN-MET LOAD 108
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 75. MM C/C FOR 113. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 1.51 SQ.CM.

___ 31J____________________ 699X 175X 300_____________________ 22J____

| |
||=========================================================================||
| 2No12 H 243. 0.TO 700 | | | |
| 3*12c/c 75 | | 3*12c/c 75 | |
| 2No12 H 57. 0.TO 700 | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

H:\STAAD FILES\STRUCTURAL\PROPOSED ONE STOREY BUILDING.anl Page 40 of 52

 Sunday, May 23, 2021, 10:39 PM
STAAD SPACE -- PAGE NO. 41

ACI 318-11 BEAM NO. 32 DESIGN RESULTS

=============================================

LEN - 700. MM FY - 230. FC - 21. MPA, SIZE - 175. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 700. YES YES

2 243. 2 - 12MM 0. 700. YES YES

B E A M N O. 32 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 8.12 KNS Vc= 31.62 KNS Vs= 0.00 KNS
Tu= 1.34 KN-MET Tc= 0.8 KN-MET Ts= 1.8 KN-MET LOAD 107
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 75. MM C/C FOR 113. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 1.48 SQ.CM.

AT END SUPPORT - Vu= 8.97 KNS Vc= 31.37 KNS Vs= 0.00 KNS
Tu= 1.34 KN-MET Tc= 0.8 KN-MET Ts= 1.8 KN-MET LOAD 107
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 75. MM C/C FOR 113. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 1.48 SQ.CM.

___ 32J____________________ 699X 175X 300_____________________ 29J____

| |
||=========================================================================||
| 2No12 H 243. 0.TO 700 | | | |
| 3*12c/c 75 | | 3*12c/c 75 | |
| 2No12 H 57. 0.TO 700 | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

H:\STAAD FILES\STRUCTURAL\PROPOSED ONE STOREY BUILDING.anl Page 41 of 52

 Sunday, May 23, 2021, 10:39 PM
STAAD SPACE -- PAGE NO. 42

ACI 318-11 BEAM NO. 33 DESIGN RESULTS

=============================================

LEN - 3000. MM FY - 230. FC - 21. MPA, SIZE - 175. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 3000. YES YES

2 243. 2 - 12MM 0. 468. YES NO
3 241. 2 - 16MM 585. 3000. NO YES

B E A M N O. 33 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 3.96 KNS Vc= 31.87 KNS Vs= 0.00 KNS
Tu= 0.94 KN-MET Tc= 0.8 KN-MET Ts= 1.3 KN-MET LOAD 108
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 75. MM C/C FOR 1264. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 1.04 SQ.CM.

AT END SUPPORT - Vu= 5.50 KNS Vc= 31.45 KNS Vs= 0.00 KNS
Tu= 0.94 KN-MET Tc= 0.8 KN-MET Ts= 1.3 KN-MET LOAD 108
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 75. MM C/C FOR 1264. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 1.04 SQ.CM.

___ 31J____________________ 3000X 175X 300_____________________ 24J____

| |
||========== =============================================================||
| 2No12 H 243.|2N0.TOH|468. 585.TO|3000 | | | | | | | | | | | | | | | | | | |
| 18*12c/c 75 | | | | | | | | | | | | | | | | | | | | | | |18*12c/c 75| | |
| 2No12 H |57.| |0.TO 3000| | | | | | | | | | | | | | | | | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#12 | | 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

H:\STAAD FILES\STRUCTURAL\PROPOSED ONE STOREY BUILDING.anl Page 42 of 52

 Sunday, May 23, 2021, 10:39 PM
STAAD SPACE -- PAGE NO. 43

ACI 318-11 BEAM NO. 34 DESIGN RESULTS

=============================================

LEN - 3000. MM FY - 230. FC - 21. MPA, SIZE - 175. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 3000. YES YES

2 241. 2 - 16MM 0. 2290. YES NO
3 243. 2 - 12MM 2407. 3000. NO YES

B E A M N O. 34 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 5.45 KNS Vc= 31.51 KNS Vs= 0.00 KNS
Tu= 1.09 KN-MET Tc= 0.8 KN-MET Ts= 1.4 KN-MET LOAD 107
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 75. MM C/C FOR 1264. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 1.20 SQ.CM.

AT END SUPPORT - Vu= 4.02 KNS Vc= 31.88 KNS Vs= 0.00 KNS
Tu= 1.09 KN-MET Tc= 0.8 KN-MET Ts= 1.4 KN-MET LOAD 107
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 75. MM C/C FOR 1264. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 1.20 SQ.CM.

___ 24J____________________ 3000X 175X 300_____________________ 32J____

| |
||========================================================= ===============||
| 2No16 H 241.| |0.TO 2290| | | | | | | | | | | |2No12|H|243.2407.TO|3000 |
| 18*12c/c 75 | | | | | | | | | | | | | | | | | | | | | | |18*12c/c 75| | |
| 2No12 H |57.| |0.TO 3000| | | | | | | | | | | | | | | | | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | | | oo |
| 2#16 | | 2#16 | | 2#16 | | 2#16 | | | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

H:\STAAD FILES\STRUCTURAL\PROPOSED ONE STOREY BUILDING.anl Page 43 of 52

 Sunday, May 23, 2021, 10:39 PM
STAAD SPACE -- PAGE NO. 44

ACI 318-11 BEAM NO. 35 DESIGN RESULTS

=============================================

LEN - 3000. MM FY - 230. FC - 21. MPA, SIZE - 175. X 300. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

(MM) (MM) (MM) STA END
_____________________________________________________________________

1 57. 2 - 12MM 0. 3000. YES YES

2 243. 2 - 12MM 0. 718. YES NO
3 243. 2 - 12MM 2157. 3000. NO YES

B E A M N O. 35 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 2.65 KNS Vc= 32.75 KNS Vs= 0.00 KNS
Tu= 0.25 KN-MET Tc= 0.8 KN-MET Ts= 0.0 KN-MET LOAD 3
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.50 KNS Vc= 32.75 KNS Vs= 0.00 KNS
Tu= 0.25 KN-MET Tc= 0.8 KN-MET Ts= 0.0 KN-MET LOAD 3
STIRRUPS ARE NOT REQUIRED.

___ 29J____________________ 2999X 175X 300_____________________ 30J____

| |
||================= =====================||
| 2No12 H 243. 0.TO 718 2No12 H 243.2157.TO 3000 |
| |
| 2No12 H 57. 0.TO 3000 |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oo | | oo | | | | | | oo | | oo |
| 2#12 | | 2#12 | | | | | | 2#12 | | 2#12 |
| | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

********************END OF BEAM DESIGN**************************

222. DESIGN COLUMN 1 TO 15

H:\STAAD FILES\STRUCTURAL\PROPOSED ONE STOREY BUILDING.anl Page 44 of 52

 Sunday, May 23, 2021, 10:39 PM
STAAD SPACE -- PAGE NO. 45

ACI 318-11 COLUMN NO. 1 DESIGN RESULTS

===============================================

FY - 230.0 FC - 21.0 MPA, RECT SIZE - 250.0 X 150.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 375.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 12 MM 1.206 3 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 150.00 MM

ACI 318-11 COLUMN NO. 2 DESIGN RESULTS

===============================================

FY - 230.0 FC - 21.0 MPA, RECT SIZE - 250.0 X 150.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 375.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 12 MM 1.206 3 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 150.00 MM

ACI 318-11 COLUMN NO. 3 DESIGN RESULTS

===============================================

FY - 230.0 FC - 21.0 MPA, SQRE SIZE - 250.0 X 250.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 625.0 SQ. MM

H:\STAAD FILES\STRUCTURAL\PROPOSED ONE STOREY BUILDING.anl Page 45 of 52

 Sunday, May 23, 2021, 10:39 PM
STAAD SPACE -- PAGE NO. 46

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 16 MM 1.287 3 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

ACI 318-11 COLUMN NO. 4 DESIGN RESULTS

===============================================

FY - 230.0 FC - 21.0 MPA, RECT SIZE - 250.0 X 150.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 375.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 12 MM 1.206 3 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 150.00 MM

ACI 318-11 COLUMN NO. 5 DESIGN RESULTS

===============================================

FY - 230.0 FC - 21.0 MPA, RECT SIZE - 250.0 X 150.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 375.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 12 MM 1.206 3 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 150.00 MM

ACI 318-11 COLUMN NO. 6 DESIGN RESULTS

===============================================

H:\STAAD FILES\STRUCTURAL\PROPOSED ONE STOREY BUILDING.anl Page 46 of 52

 Sunday, May 23, 2021, 10:39 PM
STAAD SPACE -- PAGE NO. 47

FY - 230.0 FC - 21.0 MPA, RECT SIZE - 250.0 X 150.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 375.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 12 MM 1.206 3 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 150.00 MM

ACI 318-11 COLUMN NO. 7 DESIGN RESULTS

===============================================

FY - 230.0 FC - 21.0 MPA, RECT SIZE - 250.0 X 150.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 375.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 12 MM 1.206 3 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 150.00 MM

ACI 318-11 COLUMN NO. 8 DESIGN RESULTS

===============================================

FY - 230.0 FC - 21.0 MPA, SQRE SIZE - 250.0 X 250.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 625.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 16 MM 1.287 3 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

H:\STAAD FILES\STRUCTURAL\PROPOSED ONE STOREY BUILDING.anl Page 47 of 52

 Sunday, May 23, 2021, 10:39 PM
STAAD SPACE -- PAGE NO. 48

ACI 318-11 COLUMN NO. 9 DESIGN RESULTS

===============================================

FY - 230.0 FC - 21.0 MPA, SQRE SIZE - 250.0 X 250.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 625.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 16 MM 1.287 3 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 250.00 MM

ACI 318-11 COLUMN NO. 10 DESIGN RESULTS

===============================================

FY - 230.0 FC - 21.0 MPA, RECT SIZE - 250.0 X 150.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 375.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 12 MM 1.206 3 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 150.00 MM

ACI 318-11 COLUMN NO. 11 DESIGN RESULTS

===============================================

FY - 230.0 FC - 21.0 MPA, RECT SIZE - 250.0 X 150.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 375.0 SQ. MM

H:\STAAD FILES\STRUCTURAL\PROPOSED ONE STOREY BUILDING.anl Page 48 of 52

 Sunday, May 23, 2021, 10:39 PM
STAAD SPACE -- PAGE NO. 49

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 12 MM 1.206 3 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 150.00 MM

ACI 318-11 COLUMN NO. 12 DESIGN RESULTS

===============================================

FY - 230.0 FC - 21.0 MPA, RECT SIZE - 250.0 X 150.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 375.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 12 MM 1.206 3 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 150.00 MM

ACI 318-11 COLUMN NO. 13 DESIGN RESULTS

===============================================

FY - 230.0 FC - 21.0 MPA, RECT SIZE - 250.0 X 150.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 375.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 12 MM 1.206 3 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 150.00 MM

ACI 318-11 COLUMN NO. 14 DESIGN RESULTS

===============================================

H:\STAAD FILES\STRUCTURAL\PROPOSED ONE STOREY BUILDING.anl Page 49 of 52

 Sunday, May 23, 2021, 10:39 PM
STAAD SPACE -- PAGE NO. 50

FY - 230.0 FC - 21.0 MPA, RECT SIZE - 250.0 X 150.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 375.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 12 MM 1.206 3 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 150.00 MM

ACI 318-11 COLUMN NO. 15 DESIGN RESULTS

===============================================

FY - 230.0 FC - 21.0 MPA, RECT SIZE - 250.0 X 150.0 MMS, TIED

ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 375.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI

----------------------------------------------------------

4 - 12 MM 1.206 3 END 0.650

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 150.00 MM

********************END OF COLUMN DESIGN RESULTS********************

223. CONCRETE TAKE

224. END CONCRETE DESIGN

H:\STAAD FILES\STRUCTURAL\PROPOSED ONE STOREY BUILDING.anl Page 50 of 52

 Sunday, May 23, 2021, 10:39 PM
STAAD SPACE -- PAGE NO. 51

************** CONCRETE TAKE OFF **************

(FOR BEAMS, COLUMNS AND PLATES DESIGNED ABOVE)
NOTE: CONCRETE QUANTITY REPRESENTS VOLUME OF CONCRETE IN BEAMS, COLUMNS, AND PLATES DESIGNED ABOVE.
REINFORCING STEEL QUANTITY REPRESENTS REINFORCING STEEL IN BEAMS AND COLUMNS DESIGNED ABOVE.
REINFORCING STEEL IN PLATES IS NOT INCLUDED IN THE REPORTED QUANTITY.

TOTAL VOLUME OF CONCRETE = 3.4 CU.METER

BAR SIZE WEIGHT

NUMBER (in lbs)
-------- --------
12 691
16 208
------------
*** TOTAL= 898

225. PERFORM ANALYSIS

** ALL CASES BEING MADE ACTIVE BEFORE RE-ANALYSIS. **

VERTICAL STRUCTURAL IRREGULARITIES : SOFT STORY CHECK - ASCE/SEI 7-05

-------- ---------- --------------

STORY FL. LEVEL IN METE S T A T U S

----- ----------------- --------------------
X Z

1 4.20 OK OK

NOTE : NO SOFT STOREY IS DETECTED.

226. PARAMETER 3
227. CODE AISC UNIFIED 2010
228. TRACK 2 ALL
229. FINISH

*********** END OF THE STAAD.Pro RUN ***********

**** DATE= MAY 23,2021 TIME= 22:38: 0 ****

H:\STAAD FILES\STRUCTURAL\PROPOSED ONE STOREY BUILDING.anl Page 51 of 52

 Sunday, May 23, 2021, 10:39 PM
STAAD SPACE -- PAGE NO. 52

************************************************************
* For technical assistance on STAAD.Pro, please visit *
* http://selectservices.bentley.com/en-US/ *
* *
* Details about additional assistance from *
* Bentley and Partners can be found at program menu *
* Help->Technical Support *
* *
* Copyright (c) 1997-2015 Bentley Systems, Inc.
* http://www.bentley.com *
************************************************************

H:\STAAD FILES\STRUCTURAL\PROPOSED ONE STOREY BUILDING.anl Page 52 of 52