Scribd
Upload
549 views1 page

Setting Alarm Albox

This document provides standard operating procedures for an Albox alarm system model ACP 811. It outlines how to enter programming mode, clear zone memory, arm and disarm the system. Programming codes are listed to change master codes, user codes, and configure zones. Zone configuration examples are provided for different sensor types. Instructions are included to check alarm status, test the battery, siren, and auto dialer functions.

Uploaded by

Sar'i
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
549 views1 page

Setting Alarm Albox

This document provides standard operating procedures for an Albox alarm system model ACP 811. It outlines how to enter programming mode, clear zone memory, arm and disarm the system. Programming codes are listed to change master codes, user codes, and configure zones. Zone configuration examples are provided for different sensor types. Instructions are included to check alarm status, test the battery, siren, and auto dialer functions.

Uploaded by

Sar'i
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

STANDART OPERASIONAL PROSEDUR

ALBOX ALARM SYSTEM ACP 811

- Masuk Mode Program : [ Default ] 1234** - Clear Zona Memory : User Code*3#
- Indikator Berhasil : Bunyi Beep 2x - Clear Zona & Aktif : User Code*6#
- Indikator Gagal : Bunyi Beep 5x
- Arm/ Disarm : [ User Code Default ] 0000#

KODE PEMROGRAMAN ALARM SYSTEM ALBOX ACP


CODE FUNGSI CONTOH KETERANGAN
01 Merubah Master Code 1 1234 # Default Master Code 1234
11 Merubah User Code 11 Code Baru # Default User Code 0000

ZONA KONFIGURASI STANDART


CODE FUNGSI CONTOH KETERANGAN
21 Zona 1 21 1 0 2# Instant ( Magnetic Contact )
22 Zona 2 22 1 3 2# 24H ( Panic Button )
23 Zona 3 23 1 1 2# Delay ( PIR )
24 Zona 4 24 1 3 2# 24H ( Kick Bar )
25 Zona 5 25 1 3 2# 24H ( Smoke Detector )
28 Zona 8 28 1 3 2# 24H ( Temper )
30 Exit Delay 30 1 10# Beep Delay 10 Seconds
0 Untuk disabled
1 Untuk Enabled
31 Entry Delay 31 0 20# Beep Delay 20 Seconds
0 Untuk disabled
1 Untuk Enabled
60 Phone Number 1 60 1 081xxxxx# No Telp. 1 ( 0 Call Only, 1 Voice Call )
61 Phone Number 2 61 1 087xxxxx# No. Telp. 2

A. CEK STATUS ALARM


Telp. Alarm
- Beep 1x Alarm Non Aktif
- Beep 2x Alarm Aktif
- Beep 3x Alarm Aktif dan sedang terjadi Alarm

B. TEST
- Battery Test : User Code*4#
- Sirine : User Code*5#
- Auto Dialer : User Code*60# ( Test No. Telp. 1 )
User Code*61# ( Test No. Telp. 2 )

Page 1 of 1

You might also like