Scribd Logo
Upload

Welcome to Scribd!

  • 80 views

    Clip Angle Connection: Design Forces

    Uploaded by

    SIVAKUMAR
    This document summarizes the design checks for a clip angle connection between a beam and a column. It details the member forces, connection details such as bolt size and spacing, and performs checks for shear, tension, combined shear and tension, block shear, prying, bearing, and bending moment in the clip angle. All design checks are shown to meet the required capacity.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    Clip Angle Connection: Design Forces

    Uploaded by

    SIVAKUMAR
    80 views3 pages
    This document summarizes the design checks for a clip angle connection between a beam and a column. It details the member forces, connection details such as bolt size and spacing, and performs checks for shear, tension, combined shear and tension, block shear, prying, bearing, and bending moment in the clip angle. All design checks are shown to meet the required capacity.

    Original Title

    Shear Connection

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes the design checks for a clip angle connection between a beam and a column. It details the member forces, connection details such as bolt size and spacing, and performs checks for shear, tension, combined shear and tension, block shear, prying, bearing, and bending moment in the clip angle. All design checks are shown to meet the required capacity.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    80 views3 pages

    Clip Angle Connection: Design Forces

    Uploaded by

    SIVAKUMAR
    This document summarizes the design checks for a clip angle connection between a beam and a column. It details the member forces, connection details such as bolt size and spacing, and performs checks for shear, tension, combined shear and tension, block shear, prying, bearing, and bending moment in the clip angle. All design checks are shown to meet the required capacity.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    of 3
    At a glance
    Powered by AI
    The document describes the design and checks performed on a clip angle connection between an ISA100X100X10 angle and a beam with web depth of 300mm and flange width of 175mm. Various design checks like shear, tension, bearing, bending, block shear, prying were performed on the connection.

    Design checks that were performed on the clip angle connection include checks for shear capacity, tension capacity, combined shear and tension, block shear, prying, bearing and bending in the clip angle.

    The forces acting on the supported member included an axial force Fx of 6kN, a shear force Fy of 78kN and no axial force Fz.

    Clip Angle Connection

    Job :
    PPD : Date : Checked : Rev.
    ISA50X50
    Design forces ###
    L/C Beam Node ###
    p
    n Fx = 6 Fy = 78 Fz = 0 ###
    p (Enter member forces in kN only) ###
    ###
    Supported Member* ###
    Web depth = 300 Flange width = 175 ###
    Bolt group 1 Web thk. = 6 Flange thk. = 14
    ed (* - All dimensions in mm)

    Connection details
    g Angle = ISA100X100X10
    No. of rows (n) = 2 Dia. of bolt (do) = 20
    Grade of bolt = 8.8
    ed Shank area (Ag) = 314 mm2
    Bolt group 2
    Net area (An) = 245 mm2

    Gauge (g) = 126 mm Pitch (p) = 90 mm Edge dist. (ed) = 40 mm

    Design checks :
    Check for shear
    Shear capacity of bolt in =
    f ub
     nn An  ns Ag  = 60.4 kN (nn = 1, ns=0)
    3 *  mb
    single shear (Vdf)
    Shear capacity of bolt in =
    f ub
     nn An  ns Ag  = 120.7 kN (nn = 2, ns=0)
    3 *  mb
    double shear (Vdf)

    For bolt group 1 For bolt group 2


    Shear force per bolt = 19.5 kN Shear force per bolt = 39.1 kN
    OK OK

    Check for tension


     0.9 f ub An f yb * Ag 
    Tension capacity of bolt (Tdf) = min  ,  = 141.1 kN
      m 
     mf 
    Actual tension per bolt (Tf) = 1.5 kN
    Tension due to eccentricity (T e) = 52 kN

    Total tension per bolt (Tfp) = T f  Q  Te = 82.7 kN OK

    Check for combined shear and tension


    2 2
     Vf   Tf 
       
    V  T 
     df   df 
    Clip Angle Connection
    Job :
    PPD :2
    V T 
    2
    Date : Checked : Rev.
     f
      f  = 0.448 OK
    V  T 
     df   df 
    Check for block shear
    Tdb1 = Avg f y 0.9 * f u Atn Avg = 1300 mm2

    3 m 0  m1 Avn = 970 mm2
    = 337.7 Atg = 400 mm2
    Atn = 290 mm2
    0.9 Avn f u Atg f y
    Tdb1 
    = 3 m1  m0

    = 323 kN

    Tdb = min( Tdb1 , Tdb2 ) = 323 kN OK

    Check for prying


    lv = 60 mm
    lv  f obet 4

    Additional tension in bolts (Q) =  Te   le = 40 mm
    2le  27lelv2  β = 2
    = 29.2 kN η = 1.5
    Moment at the heel (Mb) = Te lv  Ql e = 1.172 kN-m fo = 560 N/mm2
    be = 23.3 mm
    Moment at the bolt line (Ma) = Qle = 1.168 kN-m t = 10 mm

    Required thickness of angle = 4 * max( M a , M b ) *1.1 = 15.1 mm OK


    section f y * be

    Check for bearing


    Bearing strength of bolt = 2.5kb dtfu kb = 0.606
    on supporting beam t = 8 Buit up
    = 118.8 kN OK

    Bearing strength of bolt = 89.082 kN OK


    on supported beam web
    Bearing strength of bolt = 124.23 kN OK
    on connecting angle

    Check for clip angle


    Bending in clip angle = 2.457 kN-m

    Moment capacity = 1.2 * f y * Z


     m0

    = 6.7 kN-m OK
    Clip Angle Connection
    Job :
    PPD : Date : Checked : Rev.

    You might also like