Pipe Coating

Jfl?
y-R'
OIL CENTER RESEARCH, INC. 1,986/83* Product?

5094
OIL CENTER RESEARCH, INC., recognized world-wide as a leader in the manufacturing industry, has gained
a reputation for the high quality and dependability of their lubricants, sealants, packings, thread compounds, drill
collar and tool joint compounds and pipe coatings. During the past 30 years, OIL CENTER RESEARCH, INC. has
grown from a small manufacturing company offering a line of industrial products to a major manufacturer of many
products for all phases of industry. The foundation of OIL CENTER RESEARCH, INC.'s lubrication products is the
LIQUID-O-RING®* line of sealants and packings many of which are manufactured with LIQUILON®*. LIQUILON, in its
basic form, is commercially known as TEFLON®**, offers the ultimate in sealing and provides residual lubrication.
In addition, the LIQUID-O-RING line provides high quality products to meet the specific needs of the petroleum
industry. Thread compounds, tool joint compounds, plus many other high quality products are manufactured to meet
API (American Petroleum Institute) and IADC (International Association of Drilling Contractors) requirements,
specifications and regulations.
PROTEKTO-COAT, also manufactured by OIL CENTER RESEARCH, INC., offers a complete line of external and
internal pipe coatings for the protection of tubular goods.
Many new products have been introduced by OIL CENTER RESEARCH, INC. for applications in several areas of
industry. High quality OIL CENTER RESEARCH products now available include 944 TORSION FLUID for use in the
farming industry, VALVE LUBRICANTS and SEALANTS for all types of valves in all phases of industry, and drilling and
workover fluids for the petroleum industry. In addition, demands of general industry are met by the availability of the
many oils and greases in the LIQUID-O-RING line.
Manufactured in a modern manufacturing facility, OIL CENTER RESEARCH products are continuously tested to
assure the highest standards of quality are met before shipment out of the manufacturing plant.
Stocking and distribution of OIL CENTER RESEARCH products are handled from locations in Lafayette and
Shreveport, LA.; Houston, Midland, and Corpus Christi, TX.; and El Reno, OK. In addition, these products are
available through a world-wide network of distributors.
OIL CENTER RESEARCH, INC. supplies many leading companies with products marketed under their own
private trademarks. Contact one of our representatives for assistance in securing our professional in-house
services for designing, producing and printing your own labels.
"Registered trademark of Oil Center Research
"Registered trademark of DuPont
5095
TABLE OF CONTENTS
THREAD SEALANTS PAGE VALVE LUBRICANTS AND SEALANTS
Made with Liquilon® Valve Klean 61 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Liquid-O-Ring 1 0 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Valve Life 600/1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Liquid-O-Ring 1 0 4 - S . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Valve Seal 602/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Liquid-O-Ring 1 0 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Valve (PeanutButter) Lube 606 . . . . . . . . . . . . . . . . 15
Liquid-O-Ring 2 0 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Valve Plus 6 0 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Liquid-O-Ring 3 0 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Plug Valve Lubricant 603, 604 & 605 . . . . . . . . . . . 16
Liquid-O-Ring 4 0 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Plug Valve Lubricant 6 0 3 - H V . . . . . . . . . . . . . . . . . . 16
Liquid-O-Ring 4 0 4 - S . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Liquid-O-Ring 114-F . . . . . . . . . . . . . . . . . . . . . . . . . . 2 PREMIUM LUBRICANTS AND SEALANTS
Liquid-O-Ring 4 0 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
THREAD COMPOUNDS Polymer 4 0 0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
API Modified 300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 WLR111...................................17
API Modified 301 & 307 . . . . . . . . . . . . . . . . . . . . . . . 3 Bearing Compound 101 . . . . . . . . . . . . . . . . . . . . . . 1 8
Premium API Modified 3 1 5 . . . . . . . . . . . . . . . . . . . . . 3
Pure Graphite 115 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 GREASES
Liquid-O-Ring 1 2 0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Typical Observations Chart 150,151,153,154,
155,156,157,159& 167 . . . . . . . . . . . . . . . . . . . . . 18
PIPE STORAGE COMPOUNDS
Liquid-O-Ring 1 2 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 OILS
Liquid-O-Ring 125 Self H e a l i n g . . . . . . . . . . . . . . . . . 4 GX-Hydraulic Oils 939,940 & 941 . . . . . . . . . . . . . 19
Liquid-O-Ring 1 1 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 GX Universal Torsion Fluid 9 4 4 . . . . . . . . . . . . . . . . 19
Industrial Grade Gear Oils 750 & 7 5 1 . . . . . . . . . . . 20
EXTREME TEMPERATURE COMPOUNDS Penetrating Oil 920 . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Liquid-O-Ring H T - 1 8 0 0 . . . . . . . . . . . . . . . . . . . . . . . . 5 Open Gear Lubricant 7 6 0 . . . . . . . . . . . . . . . . . . . . . 20
Liquid-O-Ring H T - 2 0 0 0 . . . . . . . . . . . . . . . . . . . . . . . . 5 Cutting O i l s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Liquid-O-Ring H T - 2 6 0 0 . . . . . . . . . . . . . . . . . . . . . . . . 5
Cold Lube 200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 OIL ADDITIVES
GX-Seal Hydraulic Fluid Additives . . . . . . . . . . . . . 21
THREAD LOCKING COMPOUND GX-Safety Seal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Liqui-Lok 250 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Plus Oil T r e a t m e n t . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
TOOL JOINT DRILLING AND WORKOVER PRODUCTS
AND DRILL COLLAR COMPOUNDS Hyposeal 527 & 528 . . . . . . . . . . . . . . . . . . . . . . . . . 22
Zn-40, Zn-50 & Zn-60 . . . . . . . . . . . . . . . . . . . . . . . . . 6 Liquid-O-Ring 5 7 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Zn-50 HT & Zn-50 ET . . . . . . . . . . . . . . . . . . . . . . . . . 7 Liquid Gel 536 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Lead Base 225 & 226 . . . . . . . . . . . . . . . . . . . . . . . . . 7 Instant Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Liquid-O-Ring No. 9 . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 H y d r o g e l . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Liquid-O-Ring 2 0 9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Copper Seal 220 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 SPECIALTY PRODUCTS
Liquid-O-Ring 20/20 . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Wonder 900 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
1ST Choice 201 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Rig Kleen Rig Washing Compound 9 5 0 . . . . . . . . . 23
Drill Pipe Compound 212 . . . . . . . . . . . . . . . . . . . . . . 9 Super Cut Oilfield Degreaser 9 5 6 3 . . . . . . . . . . . . . 23
Drill Collar Compound 2 2 2 . . . . . . . . . . . . . . . . . . . . . 9 Handy Clean Waterless Hand Cleaner 959...... 23
Mean & Green Heavy Duty Cleaner 1091 . . . . . . . 23
PIPE COATINGS AT-5 5 in 1 Cleaner 1 0 9 2 . . . . . . . . . . . . . . . . . . . . . . 23
Internal & External 9 0 8 . . . . . . . . . . . . . . . . . . . . . . . 10 Mighty Mulse Emulsifying Degreaser
Internal 910 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Degreaser 991 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
External 9 1 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Golden Yellow Concrete Cleaner 9541.......... 23
External 9 1 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Food Plant & Hard Surface Cleaner 9565 . . . . . . . 24
External 9 1 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Super Pink Car & Truck Wash 9554 . . . . . . . . . . . . 24
External 9 2 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Deluxe White Car & Truck Wash 9551 . . . . . . . . . . 24
External 9 2 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Thrifty Car & Truck Wash 9552 . . . . . . . . . . . . . . . . 24
External 9 2 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Economy Car & Truck Wash 9 5 5 3 . . . . . . . . . . . . . . 24
Water Base, External 1011 . . . . . . . . . . . . . . . . . . . 11 Peroxygen Low Foam Laundry Detergent 9570 .. 24
Water Base, External 1022 . . . . . . . . . . . . . . . . . . . 11 Premium Low Foam Laundry Detergent 9571.... 24
Thread Gard 1 1 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Economy Low Foam Laundry Detergent 9572 ... 24
Protekto-Coat Typical Observations Chart . . . . . . 12 Peroxygen Dry Powder Bleaching
Compound 9530 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
WIRELINE PRODUCTS Chlorine Dry Powder Bleaching Compound . . . . . 24
Grease Seal 765, 767, 768, 770, 774 & 776 . . . . . 13 D-13 Automatic Machine Dishwashing
Line Spray 7 7 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Powder 9520 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Jolly Suds Liquid Detergent 9573 & 9574 . . . . . . . 24
PUMP AND VALVE PACKINGS Marine S o a p . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
G-77 (9590 & 9591) & G-88 (9592) Special
Semi-Liquid Packing 505, 506 & 507 . . . . . . . . . . . 14 Hand Washing P o w d e r . . . . . . . . . . . . . . . . . . . . . . . 24
5096
HbmmiDfcE-
THREAD SEALANTS
R
Made with LIQU1LON
LIQUID-O-RING THREAD SEALANTS are superior

sealants servicing pressures to 20,000 psi and tem- Color . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Green
peratures to 600°F (315°C). They are water-repellent and Bulk Appearance . . . . . . . . . . . . . . . . . . . . Rough
eliminate corrosion by providing complete thread Manufacturing Process . . . . . . . . . . . . . . . Fluoromation
Active Component . . . . . . . . . . . . . . . . . . . "LIQUILON"
coverage. LIQUID-O-RING THREAD SEALANTS seal Average Specific Gravity (f« 77°F) . . . . ... 1.165
the helical path, a common area of leakage and actually
pack-off this area in a manner similarto packing a stuff ing Water Repellent . . . . . . . . . . . . . . . . . . . . . Yes
Worked Penetration ASTM D-217 . . . . . . . ±300
box. Severely damaged threads are also sealed making NLGI Number . . . . . . . . . . . . . . . . . . . ... 1
the pipe usable again. Melting Temperature . . . . . . . . . . . . . . ... -SOOT
s . . (Active Components) . . . . . . . . . . . . 600°F
Drop Point ASTM D-566 . . . . . . . . . . . . . . Not Determinate
Separation . . . . . . . . . . . . . . . . . . . . . . . . Nil
LIQUID-O-RING 104 Stability . . . . . . . . . . . . . . . . . . . . . . . . ... Indefinite Shelf Life
Superior Thread Sealant Free Acidity (Oleic) ASTM-128 . . . . . . . . . 0.16%
UNLIMITED APPLICATIONS Free Alkali ASTM-1 28 . . . . . . . . . . . . . . . . None Detectable
Residual Lubrication, E. P. Lubricant,

Excellent Sealing Properties
Eight Grades For Most Service Conditions

LIQUID-O-RING 104
All purpose heavy duty grade for pipes 2" and larger.
Especially recommended for application to pipe where
hydrogen sulfide contamination is present.
LIQUID-O-RING 104-S
Also available specifically for use in CO2 and other harsh
environments. -
LIQUID-O-RING 105
Recommended for application on coarse, corroded and
special threads requiring seal rings. Also recommended
for use on fiberglass connections.
LIQUID-O-RING 204
Low temperature grade, brushable to - 50°F (- 45°C).
LIQUID-O-RING 304
Used where economy and material quantity are primary
A p p l i e d to a l l - t y p e s and s i z e s of t h r e a d s , considerations.
LIQUID-O-RING THREAD SEALANTS provide fast, LIQUID-O-RING 404
non-galling, non-seizing make-up and break-out on a Premium grade for pipes smaller than 2" (see Premium
wide range of pipes including stainless, nickel, alumi- Lubricants and Sealants section of this catalog).
num, brass, copper, cast iron, titanium, plastic and
fiberglass, LIQUID-O-RING THREAD SEALANTS are LIQUID-O-RING 404-S
used extensively in the oil industry on casing, tubing and Also available specifically for use in CO2 and other harsh
line pipe. LIQUID-O-RING 104 has been the standard of environments.
industry forthe toughest jobs. Government agencies and LIQUID-O-RING 114F
major oil companies specify 104 when absolute protec- Food grade sealant meeting FDA Standards and having
tion is required. It has been used extensively for several a USDA rating of "AA" for application to equipment and
years by the A.E.C. and E.R.D. A. on large diameter cas- parts with incidental exposure and contact with edible
ing for atomic testing. It is also recommended by major oil products.
companies for leak free tubing and casing runs where PACKAGING: Available in 5oz. (141.7g)brush top and 1lb(454g) jars, 1 gal (10 Ib, 4.5 kg) and 2
rigs are under powered to acquire the correct make-up. gal (20 Ib, 9.1 kg) pails, 16 gal (140 Ib, 63.6 kg) and 55 gal (500 Ib, 226.8 kg) drums.
2 OIL CENTER RESEARCH, INC.

5097
THREAD COMPOUNDS
API MODIFIED 300 API MODIFIED, SILICONE and SYNTHETIC THREAD
High Pressure-High Temperature COMPOUNDS meet the specifications of ASTM D 92,
For Tubing, Casing and Line Pipe ASTM D 217, ASTM D 566, and MIL-l-8660.
Contains Corrosion And H2S Inhibitors PACKAGING: Available in 2 gal (25 Ib, 11.4 kg), 3Vi gal (50 Ib. 22.7 kg) and 5 gal (70 Ib, 31.8 kg)
pails. API 300 is also available in 16 gal (180 Ib, 81.8 kg) and 55 gal (600 Ib, 272.7 kg) and (800 Ib,
363.9 kg) drums.
PREMIUM API MODIFIED 315

Contains Special "Bonding Agent"
LIQUID-O-RING 300 API MODIFIED THREAD COM- API MODIFIED 315 contains a special "Bonding Agent"®
POUND is manufactured to the specifications of, and which permits the API Thread Compound to better pack
conforming to the requirements of API Bulletin 5A2, a bul- off within the threaded area. This allows the API Modified
letin under the jurisdiction of the American Petroleum thread compound to effect an extra seal on tubing and
Institute Committee on Standardization of Tubular large diameter casing. API MODIFIED 315 will permit a
Goods. It is used extensively because of its uniformity large percentage of pipe to pass hydrostatic testing. The
and reliability for setting tubing and casing joints with addition of anti-corrosive agents to API MODIFIED 315
electronic torque monitoring equipment. LIQUID-O- allows the tubing and casing to remain in service for a
RING 300 is also recommended for hydrostatic testing of longer period of time when exposed to hydrogen sulfide.
tubing and casing. PACKAGING: Available in 2 gal (25 Ib, 11.4 g) and 3te gal (50 Ib, 22.73 kg) pail.
TYPICAL OBSERVATIONS API MODIFIED 300 LIQUID-O-RING 115 PURE GRAPHITE

COMPONENT
API MODIFIED Economy Grade Thread Compound
300
Grease and Corrosion Inhibitor 36.1 LIQUID-O-RING PURE GRAPHITE applied to threads
Powdered Graphite 18.0 on casing, tubing, oil, gas and steam lines, provides a
Lead Powder 30.0 permanent non-hardening lubricating seal. In addition, it
Zinc Dust 12.6 prevents freezing, galling and seizing even under high
Copper Flake 3.3
temperature conditions. LIQUID-O-RING PURE
GRAPHITE contains an anti-corrosion additive and
API 301 THREAD COMPOUND is available with silicone requires no thinning. IT CONTAINS NO LEAD, ZINC, OR
for use in high temperature situations, as those associ- OTHER METALLIC ADDITIVES.
ated with deep and hot wells.
LIQUID-O-RING PURE GRAPHITE is also used as
Also available is API SYNTHETIC 307. Specifically for- a general purpose graphite grease for a wide variety
mulated to resist hydrocarbons, it has been successfully of uses.
lab and field tested on pipes being pressure tested with PACKAGING: Available in 3V5 gal (30 Ib, 13.6 kg) pails, and 16 gal (120 Ib, 54.6 kg) and 55 gal
diesel. (400 Ib, 181.4 kg) drum.
OIL CENTER RESEARCH, INC. 3

5098
LIQUID-O-RING120 LIQUID-O-RINGTHREADSEALANT120providesseal-
Economical ing at pressures up to 12,000 psi and temperatures to
Thread Sealant and Lubricating Compound 600°F (315°C). LIQUID-O-RING 120 is made with TFE
Made with Moly and TEFLON® and Moly to provide superior protection and lubrication to
thread crowns, flanks and roots. It extends the life of
tubular goods, eliminates the need for special threads
and prevents galling and seizing. 120 prevents corrosion
by providing full thread coverage.
120 is recommended for all metal and non-metal threads,
pipe connections, tubing and casing. It is also used as a
thread lubricant for studs and bolts. 120 is liquid enough
to be applied by an ordinary paint brush to box or collar
threads. LIQUID-O-RING 120 will plate out forming a
non-hardening seal. 120 does not have to be diluted or
thinned prior to application.
PACKAGING: Available in 1 gal (3.8 I), 2 gal (7.6 I), 3V4 gal (13.2 I) and 5 gal (18.9 I) pails.
16 gal (60.61) and 55 gal (208.21) drums.
PIPE STORAGE COMPOUNDS

LIQUID-O-RING 127 PIPE STORAGE icals, hydrogen sulfide, carbon dioxide or other con-
COMPOUND taminants. PIPE STORAGE COMPOUND contains no
For Protection of Pipe Threads metals, a condition which can contribute to a corrosion
During Extended Periods of Pipe Storage conducive atmosphere. Adhesive agents are also pres-
ent to assure 127 stays stuck to the pipe.
PIPE STORAGE COMPOUNDS are different from API
thread compounds and should not be used as thread
sealants. They are designed specifically to provide pro-
tection and fight corrosion and other types of deteriora-
tion associated with pipe and equipment in storage. 127
PIPE STORAGE COMPOUND also finds use as a gen-
eral purpose lubricant when a water resistant, corrosion
inhibited grease is required.
PACKAGING: Available in 5 gal (35 Ib, 15.9 kg) pail and 55 gal (330 Ib, 150 kg) drum.
LIQUID-O-RING 125 SELF HEALING

PIPE STORAGE COMPOUND
Provides Self-Leveling Properties
for Nicks and Scratches After Application
125 offers the same properties as 127 plus, it is self heal-
ing. It is specially formulated for use when there is need
for extra protection against nicks, bumps and scratches
during storage. Minor defects, caused by external
Specifically formulated for corrosion protection on sources, to the surface of SELF HEALING PIPE
threads during extended pipe storage, 127 PIPE STOR- STORAGE COMPOUND "heal" themselves. Its special
AGE COMPOUND offers a corrosion additive package self-leveling properties recover these blemishes, yet its
that far exceeds API thread compounds. By providing a balanced system has just the right thixotropy or gel
protective film which deactivates the metal surface, it strength to enable SELF HEALING PIPE STORAGE
resists oxidation, rust and pitting; problems which may be COMPOUND to remain in place on the pipe.
attributed to moisture intrusion, downhole treating chem- PACKAGING: Available in 5 gal (35 Ib, 15.9 kg) pail and 55 gal (330 Ib, 149.7 kg) drum.

5099
LIQUID-O-RING116 PIPE DOPE

Multi-Purpose Lubricating Compound
Contains Anti-Corrosion Agent
An economical multi-use lubricating compound,

LIQUID-O-RING PIPE DOPE provides protection
against salt water and corrosion. It prevents thread
damage to tubing, casing, drill collars, drill pipe and tool
threads while in storage or on racks under outdoor
conditions. LIQUID-O-RING PIPE DOPE contains zinc,
corrosion and rust inhibitors, and is waterproof. It is rec-
ommended for application to pipes during storage.
PACKAGING: Available in 1 gal (8 Ib, 3.6kg) andSVSgal (30lb, 13.6kg) pails, and 55gal (400 Ib,
181.4 kg) drum.
EXTREME TEMPERATURES COMPOUNDS
LIQUID-O-RING HT-1800 LIQUID-O-RING HT-2000

Pure Copper Compound Anti-Seize Lubricant
LIQUID-O-RING HT-1800 LIQUID-O-RING HT-2000, a solid-film lubricating com-
Pure Copper Compound, a pound, is recommended for anti-seize applications at
solid film, anti-seize lubricating temperatures as high as 2000°F (1093°C). Especially
compound, is manufactured recommended for use on stainless steel, it is non-cor-
from the highest quality cop- rosive and can be used anywhere there is metal-to-metal
per. It is guaranteed to contain contact to prevent galling, seizing, rust and corrosion.
no lead or graphite. HT-1800 PACKAGING: Available in 4 oz (113.4 g) brush top jars, Vi pt (10 oz, 283.5 g) and 1 pt (20 oz,
services temperatures as high 567 g) cans, and 1 gal (10 Ib, 4.54 kg) pail.
as 1800°F (982°C). It can be

applied to hot surfaces with-
LIQUID-O-RING HT-2600
out running or dripping. While
Pure Nickel Compound
maintaining its sealing qual- Formulated for extreme high temperature applications,
ities under extreme torque, LIQUID-O-RING HT-2600 services temperatures up to
HT-1800 breaks out readily without galling or damage to 2600°F (1426°C).
the threads. It has an extremely low coefficient of friction, PACKAGING: Available in 4 oz (113.4 g) brush top jars, M> pt (10 oz, 283.5 g) and 1 pt (20 oz,
superior lubricating properties, resists water washout 567 g) cans, and 1 gal (10 Ib, 4.54 kg) pail.
and salt water, is non-corrosive and will not separate,

harden or dry out. It is especially recommended for COLD LUBE 200
application to stainless steel at high temperatures. Cas- Low Temperature Lubricant
ing and tubing received from mill intended for thermal Made with LIQUILON
operations should be protected with HT-1800. it should Formulated for extreme low temperature situations,
be applied to all threads before couplings and protectors COLD LUBE 200 services temperatures down to - 65°F
are installed. (-53°C).
PACKAGING: Available in 4 oz (113.4 g) brush top jars, '/> pt (10 oz. 283.5 g) and 1 pt (20 oz,
567 g) cans, and 1 gal (10 Ib, 4.54 kg) pail. PACKAGING: Available in 14 oz (397 g) cartridges, 3VS gal (35 Ib, 15.9 kg) pails, 16gal (130 Ib,
59 kg) and 55 gal (400 Ib, 181.4 kg) drums.

5100
THREAD LOCKING COMPOUND
LIQUI-LOK 250 LIQUI-LOK is a thread locking compound used for lock-

Thread Locking Compound ing casing joints and other threaded connections without
welding. No thread dope is required as LIQUI-LOK
provides its own lubrication. LIQUI-LOK withstands high
breakout torque, provides a leakproof seal and is corro-
sion resistant. Extensive tests show LIQUI-LOK is
unaffected by vibration and low temperature storage.
PACKAGING: Vfe Ib (227 g) kit packaged 12 kits/case and 1 Ib (454 g) packaged 6 kits/case
A one pound kit of LIQUI-LOK

will lock approximately:
Casing Size Number of Joints
4y2» _ 51/2" 14 joints
6Va" — 7" 1 2 joints
75/s" — 9%" 7 joints
10%"— 13%" 4 joints
16" — 20" 2 joints
TOOL JOINT AND DRILL COLLAR COMPOUNDS
ZN-40, ZN-50 and ZN-60 Approved by tool joint manufacturers, LIQUID-O-RING

Zinc Base Tool Joint Compounds ZINC BASE COMPOUNDS are manufactured to con-
Contains Less Than 0.3% Sulphur form to the recommendations of "Tool Pusher's Manual"
(lADC-lnternational Association of Drilling Contractors)
and API (American Petroleum Institute) Bulletin 7A1,
"Rotary Shouldered Thread Compounds."
ZN-40 (40% zinc), ZN-50 (50% zinc) and ZN-60 (60%
zinc) are manufactured with pure metallic zinc. NO
OXIDES OF ZINC, OXIDES OF OTHER METALS, OR
GRAPHITE ARE USED. Our metallic zinc powders are
manufactured to meet API Bulletin 5A2, ASTM-D520
Type I and Federal Specification TT-P460 Type I.
In a report presented to the 1976 IADC Drilling Con-
ference, Hughes Tool Company reported zinc base tool
joint compounds using 40-50% zinc and not more than
0.3% sulfur are the most effective. LIQUID-O-RING
ZINC BASE TOOL JOINT COMPOUNDS, from incep-
tion, have been manufactured in accordance with this
recommendation.
Designed for use on tool joints, drill collars and all rotary
shouldered connections, these compounds assure
propertightening and make-up torque recommended by
tool joint manufacturers. LIQUID-O-RING ZINC BASE
COMPOUNDS are designed for drilling hard formations,
deepdrilling.forbreaking in newtool joints, fordirectional
drilling, crooked holes and other high torque conditions.
5101
LIQUID-O-RING ZINC BASE TOOL JOINT COM- LEAD BASE 225 and 226
POUNDS are manufactured using a very high quality For Drill Collars and Other High Pressure Service
petroleum base composition and anti-galling and anti-
seizing agents to produce a compound which is highly
adhesive, waterproof and brushable over a wide range
of temperatures.
PACKAGING: Zn-40 is available in 3Vi gal (40 Ib, 18.1 kg), and 5 gal (50 Ib, 22.7 kg) pails, and
55 gal (600 Ib, 272.2 kg) drum.
Zn-50 is available in 2 gal (25 Ib, 11.3 kg), 3VS gal (45 Ib, 20.4 kg), and 5 gal (65 Ib,
29.5 kg) pails, and 55 gal (600 Ib, 272.2 kg) drum.
Zn-60 is available in 2 gal (25 Ib, 11.3 kg), 3VS gal (50 Ib, 22.7 kg), and 5 gal (70 Ib,
31.8 kg) pails, and 55 gal (800 Ib, 363.6 kg) drum.
ZN-50 HT and ZN-50 ET

Premium High Temp
and Extreme Temp Grades
Specially formulated for deep hole, high temperatures
applications, ZN-50 HT and ZN-50 ET conform to the rec-
ommendations of API Bulletin 7A1, "Rotary Shouldered LEAD BASE 226 is manufactured using 65% finely
Thread Compounds", as verified by the Torque vs. powdered, pure metallic lead in a highly adhesive
Circumferential Makeup Test performed at Texas A&M petroleum base composition. Use of pure metallic lead
University. may cause lead build-up and prevent proper make-up
after repeated applications. LEAD BASE 226 is specifi-
TYPICAL OBSERVATIONS ZN-50, ZN-50 HT & ZN-50 ET cally formulated with a special agent which provides
uniform coating and prevents lead build-up.
ZN-50 ZN-50 HT ZN-50 ET
ZINC DUST SPECS LEAD BASE 226, as well as LEAD BASE 225 (over 50%
Minimum Total Zinc 98.5% 98.5% 98.5% metallic lead), are recommended for use on drill collars,
Minimum Metallic Zinc 96.0% 96.0% 96.0%
Maximum Iron and Lead 0.4% 0.4% 0.4% tool joints, casing, tubing, Christmas tree connections
Particle Size and other high pressure services where lead base com-
Pass 150 Mesh Screen 100.0% 100.0% 100.0%
Pass 325 Mesh Screen 95.0% 95.0% 95.0% pounds are desired. LEAD BASE 226 and 225 provide
Average Particle Size 7 Microns 7 Microns 7 Microns leak free joints, prevent galling and seizing, withstand
Meets Federal Spec. TT-P460 Type 1 TT-P460 Type 1 TT-P460 Type 1
andASTMD-520 andASTMD-520 andASTMD-520 extreme pressure, are highly corrosion resistant and are
Typel Type 1 Type 1 readily brushable over a wide temperature range.
PETROLEUM BASE
Soap Type Lithium Base Complex Grease Premium Complex PACKAGING: Available in 2 gal (25 Ib, 11.4 kg) and 3V? gal (50 Ib, 22.7 kg) pails.
Grease
Dropping Point 395°F 535f 580°-615°F
Mineral Oil Viscosity Index 49 49 49 LIQUID-O-RING NO. 9
Vis. SUS«tf210°F(100°C) 110.8 110.8 110.8 For Tool Joints, Casing and Tubing
Vis. SUS @10<rF (38°C) 2344 2344 2344
Brushability 0°F(-17.8°C) 0°F(-17.8°C) 0*F(-17.8'>C) An economical, metallic base anti-seize compound.
Recommended Maximum
Temperature 390°F 500°F 575°F LIQUID-O-RING NO. 9 is manufactured using red
lead and a petroleum base compound. It safeguards
against rust, corrosion, and salt water. It is completely
ZN-50 HT and ZN-50 ET are manufactured using high waterproof.
quality raw materials and are subjected to strict quality
PACKAGING: Available in 30 Ib (13.6 kg) pails.
control standards. These products are recommended for
use on tool joints, drill collars and all rotary shouldered LIQUID-O-RING 209
connections. Economy Grade Tool Joint Compound
PACKAGING: Available in 316 gal (45 Ib, 20.4 kg) pail. For Tool Joints, Casing and Tubing
Our c u s t o m e r s have used our economical
LIQUID-O-RING No. 9 and are aware of its excellent
properties. However, after several years of extensive
testing, we have developed an improved material known
as LIQUID-O-RING 209.
OIL CENTER RESEARCH, INC.
5102
regardless of temperature, pressure and extended peri-

(209 continued)
ods of use including permanent installation.
In a report presented by Hughes Tool Company, it was
reported that tool joint compounds using not more than
0.3% sulfur are the most effective. LIQUID-O-RING 209 TYPICAL OBSERVATIONS/COPPER SEAL 220
is manufactured in accordance with this recommenda- PETROLEUM BASE
tion. It is an economical tool joint compound for regular Dropping Point ASTM D-566 . . . . 500°F
duty drilling conditions on tool joints, casing and tubing. Flash Point ASTM D-92 . . . . . . . . 425°F
Pour Point ASTM D-97 . . . . . . . . . -20°F
Manufactured using a base compound of high metallic Brushability . . . . . . . . . . . . . . . . . . . 0°F
lead, it will not run or drip, and sticks to wet joints to Water Resistance.............. Excellent
provide protection against salt water and corrosion. Worked Penetration ASTM D-217 330
GRAPHITE
LIQUID-O-RING 209 is completely waterproof and offers Particle Size
protection against galling and seizing. Pass 1 5 0 M e s h . . . . . . . . . . . . . . . 99%
PACKAGING: Available in 1 gal (10 Ib, 4.5 kg), 2 gal (20 Ib, 9.1 kg), 3V4 gal (30 Ib, 13.6 kg) and
Pass 325 M e s h . . . . . . . . . . . . . . 60% rnin
5 gal (45 Ib, 20.4 kg) pails and 16 gal (140 Ib, 63.5 kg) drum. LEAD POWDER
Minimum Metallic Lead . . . . . . . . . 97%
Particle Size
Pass 100 M e s h . . . . . . . . . . . . . . 99%
COPPER SEAL 220 Pass 325 M e s h . . . . . . . . . . . . . . 92%
Copper Base Thread Lubricant and Sealant COPPER FLAKE
Minimum Metallic Copper....... 98%
Drill Collar Extreme Service Compound, Particle Size
Casing and Tubing High Pressure Sealant Pass 200 M e s h . . . . . . . . . . . . . . 100%
Pass 325 Mesh . . . . . . . . . . . . . . 99%
COPPER SEAL should be used in areas subjected to

high temperatures such as heat exchangers, catcrack-
ing units, reactors, steam lines, and boilers, COPPER
SEAL may also be applied in areas where rust and
corrosion are a problem, such as offshore drilling rigs.
COPPER SEAL not only lubricates and seals, but
provides a waterproof coating against rusting of metal
exposed to salt water and chemical contamination.
PACKAGING: Available in 1 gal (10 Ib, 4.5 kg), 2 gal (20 Ib, 9.1 kg), 3VS gal (35 Ib, 15.9 kg),
5 gal (50 Ib, 22.7 kg) pails, and 55 gal (500 Ib, 226.8 kg) drum.
COPPER SEAL is manufactured to exacting specifica-

tions using carefully proportioned quantities of copper LIQUID-O-RING 20/20
flake, pure metallic lead and graphite. This quality lubri- Copper Base Tool Joint Compound
cating sealant services temperatures to 1600T (871°C)
and provides anti-seize performance required for break- LIQUID-O-RING 20/20 is designed to meet the tough
ing in new tool joints, lubricating drill collars and for seal- drilling conditions-highspeed, hightorque, excessive
ing casing or tubing. COPPER SEAL is used in all areas weight and directional drilling in hot, high pressure, deep
of the petroleum industry. wells. It is manufactured using the finest copper flake,
metallic lead, air-floated graphite and molydisulfide, in a
Applied to metal surfaces, it produces a tough coating
high quality petroleum base compound. 20/20 prevents
which protects against metal-to-metal contact, galling
galling and seizing, protects against washout, corrosion
and seizing. COPPER SEAL is permanently effective
and rust and prolongs thread life. Its superior adhering
enabling fast make-up and break-out even under the
characteristics allow 20/20 to stick perfectly to wet joint.
most demanding conditions. It protects against corro-
20/20 is recommended for use on tool joints, drill collars,
sion and oxidation.
subsurface drilling tools and it may also be used on tub-
COPPER SEAL provides a leak-proof seal for tubing and ing, casing, or other threaded connections. Like other
casing connections and provides consistent make-up LIQUID-O-RING compounds, 20/20 will never harden
torque. The copper-lead-graphite composition is not or dry out, and will provide superior corrosion protection
affected by expansion or contraction, vibration or load, to threads.
5103
TYPICAL OBSERVATIONS/LIQUID-O-RING 20/20

LIQUID-O-RING DRILL PIPE COMPOUND contains
the same basic properties as does LIQUID-O-RING
PETROLEUM BASE
Dropping Point ASTM D-566 . . . . . SOOT DRILL COLLAR COMPOUND but with greater economy
Flash Point ASTMD-92 . : . , . . . . . 425°F for applications where a lighter weight and service
Pour Point ASTM D-97 . . . . . . . . . -20°F
0°F
compound satisfies all requirements. LIQUID-O-RING
Brushability . . . . . . . . . . . . . . . . . . .
Water R e s i s t a n c e . . . . . . . . . . . . . . . Excellent DRILL PIPE COMPOUND maintains excellent water
Worked Penetration ASTM D-217 . 330 resistance while fighting rust and corrosion problems.
GRAPHITE Use LIQUID-O-RING DRILL PIPE COMPOUND in any
Particle Size
Pass 150 Mesh . . . . . . . . . . . . . . . 99% drilling application where torque, vibration or extreme
Pass 325 Mesh . . . . . . . . . . . . . . 60% min temperatures constitute a problem. LIQUID-O-RING
LEAD POWDER DRILL PIPE COMPOUND will not harden, evaporate or
Minimum Metallic Lead . . . . . . . . . . 97%
Particle Size
oxidize and may be applied over a wide temperature
Pass 100 Mesh . . . . . . . . . . . . . . 99% range. It will provide reduced make-up torque, easier
Pass 325 Mesh . . . . . . . . . . . . . . . 92% breakout and will hold under vibration. It is water resistant
COPPER FLAKE and will not washout of the thread area. LIQUID-O-RING
Minimum Metallic Copper....... 98%
Particle Size DRILL PIPE COMPOUND is also available in ARCTIC
Pass 200 M e s h . . . . . . . . . . . . . . . 100% GRADES in standard packaging.
Pass 325 Mesh . . . . . . . . . . . . . . . 99%
PACKAGING: Available in 1 gal (10 Ib, 4.5 kg), 2 gal (25 Ib, 11.3 kg), 314 gal (30 Ib, 13.6 kg) and
MOLYBDENUM DISULFIDE 5 gal (50 Ib, 22.7 kg) pails and 55 gal (450 Ib, 204.1 kg) drum.
Particle Size
Pass 325 M e s h . . . . . . . . . . . . . . . 99%
PACKAGING: Available in 1 gal (10 Ib. 4.5 kg), 2 gal (15 Ib, 6.8 kg), 3V4 gal (30 Ib, 13.6 kg) and TYPICAL OBSERVATIONS 212 & 222
5 gal (45 Ib, 20.4 kg) pails, and 55 gal (600 Ib, 272.2 kg) drum.
SPECIFICATIONS 212 222
Color Black Gray
1ST CHOICE 201 Water Resistance Insoluble Insoluble
Tool Joint Compound Made with LIQUILON® Water Repellent Yes Yes
Worked Penetration ± 315 ± 315
LIQUID-O-RING 201/1ST CHOICE is especially NLGI Number 1 1
designed for heavy duty applications where regular API Active Component 600T (330°C) 600T (330°C)
Dropping Point SOOT (260°C) SOOT (260°C)
recommended lead and zinc base thread compounds do Oil Separation Nil Nil
not prevent galling. 1ST CHOICE is water repellent and Bulk Appearance Slightly Grainy Slightly Grainy
unaffected by contaminants. It protects against galling Texture Slightly Tacky Slightly Tacky
Other Properties Anti-Seizing Non Toxic
and seizing, reduces trip time, eliminates thread corro- Non Corrosion Non Corrosive
sion and damage, will not harden, and provides long last- Resealing Resealing
ing protection under high temperatures, pressures and Properties Properties
Residual Residual
heavy load conditions. Lubrication Lubrication
PACKAGING: Available in 3V4 gal (30 Ib, 13.6 kg) pails, and 55 gal (450 Ib, 204.1 kg) drums.
DRILL PIPE COMPOUND 212

Made with TFE
DRILL COLLAR COMPOUND 222
Made with TFE and Moly-Disulfide
LIQUID-O-RING DRILL COLLAR COMPOUND 222
satisfies the toughest application requirements where
torque, extreme temperature and vibration are problems.
It is ideal for use on worn or damaged threads. 222
provides lubrication, resists corrosion and protects new
threads from wear. In addition to its use on drill collars,
222 may also be used on tubing, casing and line pipe.
PACKAGING: Availablein! gal (10 Ib, 4.5 kg), 2gal(20lb, 11.3 kg) and 5 gal (50 Ib, 22.7kg) pails.

5104
PIPE COATINGS
Under the tradename PROTEKTO-COAT, Oil Center

Research, Inc. manufactures a complete line of internal INTERNAL PIPE COATING
and external pipe coatings that will help minimize the
costly problem of protecting pipes from damage and
metal loss due to rust and corrosion. These coatings are
910
Premium Internal Coating
manufactured specifically for the maintenance of oilfield
tubular goods, however they do have a broad range of PROrEK7O-COAT970,ourmostpopu/ar/nferna/p/pe
use extending to all areas where rust or corrosion are a coating, has been successfully used by oil com-
problem. The PROTEKTO-COAT line includes solvent panies, rental companies and oilfield service com-
base coatings as well as water base coatings for areas panies. For over ten years 910 has provided superior
where Coast Guard or EPA regulations preclude the use performance in the Gulf Coast area where damage
of any hydrocarbon contaminants. from corrosion is especially severe. It contains no
wax or paraffin and will not ball-up or affect the drift of
the pipe in any way. The slightly tacky film provides
long term protection to the ID or drill pipe, tubing,
APPLICATION INSTRUCTIONS casing, line pipe or other tubular products. It is non-
SURFACE PREPARATION: For best results, sand blast the flammable, has no offensive odor, requires no spe-
pipe to remove rust and scale. Automatic pipe cleaning equip- cial handling and is easily applied with conventional
ment, rotor tiller or wire brushing are suggested as alternative
methods however, service life of the coating may be reduced
spray equipment.
accordingly. Make sure threads are well doped. BE SURE SUR-
FACE IS COMPLETELY DRY BEFORE APPLYING COATING.
DO NOT APPLY COATING IN COLD WEATHER (BELOW EXTERNAL PIPE COATINGS
45°F).
• Check prevailing winds before beginning spraying operation.
• After exterior of pipe has been properly cleaned, with nozzle
about 12-18 inches from surface, spray the top 1/s of the pipe
911
uniformly. Use only hoses with compatible solvents.
Premium Clear External Coating For Casing
• Roll pipe joint 120 to 150 degrees and repeat application. Our finest external coating, PROTEKTO-COAT 911 is a
• Roll pipe in same manner and spray again. This should com- synthetic copolymer that offers the ultimate in corro-
plete coverage around pipe._________________
sion protection to all metal surfaces. 911 is a clear
coating which allows visual inspection of pipe after
application. It is especially effective when applied to
tubular goods exposed to the high humidity condi-
INTERNAL & EXTERNAL tions of coastal areas. PROTEKTO-COAT 911 is easily
applied to drill pipe, drill collars, line pipe and spe-
PIPE COATING cially to casing with conventional spray equipment or
by roller or brush. Pipe cleaned with automatic pipe
908 cleaning equipment and coated with 911 have been
stored for nearly 3 years with no damage from rust or
Coating for Dip Tank Application
A synthetic hydrocarbon polymer, PROTEKTO-COAT other corrosion.
908 is specially formulated to provide corrosion protec-
tion to tubular goods. It contains a corrosion inhibitor 912
package specifically designed to protect pipe against Clear, Glossy External Coating
damage caused by rust. 908 is commonly used in dip PROTEKTO-COAT 912 is an economical solvent base
tank applications where both the internal and external external coating that dries to a clear, glossy finish. This
surfaces of the pipe require protection. This light amber medium fast drying coating has excellent humidity and
coating provides aslightlytackyfilm which will notdry out, salt spray resistance and is specially formulated to
crack, gum-up or affect the drift of the pipe. PROTEKTO- provide long-lasting corrosion protection for drill pipe,
COAT 908 is a popular coating for work strings, macaroni drill collars, tubing, casing and line pipe. 912 is the rec-
tubing, or pipe which is not intended to be stored for ommended coating when high quality performance is
excessive periods of time. required at the lowest possible price.
5105
for tubing and casing. Similar to 914, it contains cor-

rosion inhibitors and a bonding agent, and is also
among the fastest drying coatings on the market.
924's amber color hides minor discolorations, yet
allows observations of pipe markings. It also pro-
vides excellent and long lasting corrosion protection
for metal surfaces and is specially recommended for
application to tubing and casing.
WATER BASE
EXTERNAL PIPE COATINGS
1011
914 Premium Clear Water Base External Coating
Clear, Fast Drying External Coating PROTEKTO-COAT1011 is a high performance water-
PROTEKTO-COAT 914 is a clear, fast drying, synthetic thinned external pipe coating that is non-flammable,
resin based coating specially recommended for tubing non-polluting and is safe and easy to use. Its clear,
and casing. It contains corrosion inhibitors and a bond- glossy quick-drying properties provide long-lasting
ing agent, and is among the fastest drying coatings on protection, without flash rusting. This clear coating
the market. 914 sets to a clear, durable film to allow com- allows visual observation of metal condition and
plete visual inspection of the pipe after application. It markings. 1011 provides outstanding mar, scuff, acid
provides excellent and long-lasting corrosion protection and solvent resistance and is easily applied by con-
for metal surfaces. ventional spraying equipment, brush or roller.
Black External Coating

1022
Black, Water Base External Coating
PROTEKTO-COAT 922 is a ready-to-spray black exter-
PROTEKTO-COAT 1022 is a water-thinned, synthetic
nal pipe coating that is designed to give economical,
copolymer that dries to a black, durable film which
long-lasting corrosion protection with a minimal amount
provides excellent humidity and salt spray resistance.
of surface preparation. It dries to a black protective film
This high gloss black finish enhances the appearance
that seals off the surface from the elements thereby
while providing long-lasting coverage. It is non-polluting,
improving the surface appearance. 922 is recommended
non-flammable, safe and easy to use. It is recommended
for use on tubing, casing, line pipe and drill collars.
for use on tubing, line pipe, pipe racks, structural steel,
casing, drill pipe, steel tanks and drilling rigs.
Amber, Semi-Clear External Coating

PROTEKTO-COAT 923 is an amber semi-clear coating SPECIALTY
that dries to a tough, glossy finish that gives the surface
an improved appearance. It is formulated as an econom-
ically priced coating and yet provides very good corro- THREAD CARD 118
sion protection for all types of pipe while stored on outside TH READ G ARD118 is an extra heavy duty corrosion and
racks. 923 can be dipped, mopped, brushed, sprayed or rust preventative that provides a waxy, non-tacky, pliable
rolled onto tubing, casing, line pipe, pipe racks, structural protective film. It is especially recommended for protec-
steel, drilling rigs or steel tanks. tion to threads where easy removal of the protective film
is desirable. THREAD GARD also provides protection to
electrical connections, wiring, etc., and prevents gal-
924 vanic corrosion of unlike metal joints.
Amber, Fast Drying External Coating
PACKAGING: Available in 5 gal (35 Ib, 15.9 kg) pail and 55 gal (400 Ib, 181.4 kg) drum.
PROTEKTO-COAT 924 is an amber, fast drying, syn-
thetic resin based coating specially recommended
5106
PROTEKTO-COAT TYPICAL OBSERVATIONS

908 910 911 912 914 922 923 924 1011 1022
TYPE Synthetic Synthetic Synthetic Synthetic Solvent Base Asphaltic Synthetic Solvent Base Water-Thinned Water-Thinned
Hydrocarbon Hydrocarbon Copolymer Organic Resin Synthetic Resin Organic Resin Synthetic Resin Synthetic Synthetic
Polymer Polymer Resin Copotymer Copolymer
DRY Light Amber Light Amber Clear Clear Clear Black Amber Amber Clear Black
APPEARANCE semi-clear semi-clear
ODOR Mild Hydro- Mild Hydro- Mild Hydro- Mild Hydro- Mild Hydro- Mild Hydro- Mild Hydro- Mild Hydro- Sweet Hydro- Sweet Hydro-
carbon carbon carbon carbon carbon carbon carbon carbon carbon carbon
TYPICAL VISCOSITY 30-34 24-25 17-21 17-21 17-21 18-22 17-21 17-21 28-32 28-32
(ft FORD CUP)
(SEC)
FLASH POINT 225°F 225T 83°F 102°F 50°F 105^F 102"F 50°F N/A N/A
(TOC)
FILM *Good adhe- Good adhesion. Fast dry STT 10 Medium fast dry Fast dry STT 5 Excellent adhe- Medium fast dry Fast dry STT 5 Excellent adhe- Excellent adhe-
PROPERTIES sion. Non- Non-drying, minutes. Excel- STT 25-35 min- minutes. Excel- sion. Humidity STT 25-35 min- minutes. Excel- sion. Excellent sion. Excellent
drying, tacky to tacky to touch. lent adhesion. utes. Good lent humidity and salt spray utes. Good lent humidity humidity and humidity and
touch. Will not Will not affect Excellent adhesion. and salt spray resistance. adhesion. and salt spray salt spray resis- salt spray resis-
affect drift. drift. humidity and Excellent resistance. Excellent resistance. tance- Outstand- tance. Outstand-
salt spray resis- humidity and Exceilent humidity and Excellent ing scuff, mar, ing scuff, mar,
tance. Excellent salt spray resis- impact, scuff salt spray resis- impact, scuff acid and solvent acid and solvent
impact, scuff tance. Excellent and mar resistance. Excellent and mar resis- resistance. resistance.
and mar resis- impact, scuff tance. Resists impact, scuff tance. Resists
tance. Resists and mar resis- the effects of and mar resis- the effects of
the effects of tance. Resists gasoline, acid tance. Resists gasoline, acid
gasoline, acid the effects of and alkali. the effects of and alkali.
and alkali. gasoline and gasoline and
acid. acid.
SUGGESTED Internal and Internal coating External coating Tubing, casing, Tubing, casing, Tubing, casing, Tubing, casing, Tubing, casing, Tubing, casing, Tubing, casing,
USE external coating of tubing casing, specially for line pipe, drill line pipe, drill drill pipe, line Itne pipe, pipe line pipe, drill line pipe, drill line pipe, drill
of work strings, line pipe drill, casing. pipe, pipe racks, pipe, pipe racks, pipe drill collars racks, structural pipe, pipe racks, pipe, pipe racks, pipe, pipe racks,
tubing, casing pipe and drill steel tanks, steel tanks and steel tanks steel, drilling steel tanks drilling rigs, drilling rigs,
and drill pipe. collars. structural steel structural steel rigs, and steel structural steel structural steel structural steel
and drilling rigs. and drilling rigs. tanks. and drilling rigs. and steel tanks. and steel tanks.
APPLICATION Dip tank brush Air spray Air spray, airless Air spray, airless Air spray airless Air spray, airless Air spray, airless Air spray, airless Air spray, airless Air spray, airless
METHODS or mop. Airless spray. spray, roller or spray, roller, spray, roller or spray, roller, spray, roller or spray, roller or spray, roller or spray, roller or
brush. brush or mop. brush brush or mop. brush. brush. brush. brush.
REMARKS Nonflammable. Nonflammable. Allows inspector Allows inspector Allows inspector Economical. Allows inspector Allows inspector Allows inspectnr Safe and easy to
No offensive No offensive to observe to observe to observe Reflects unifor- to observe to observe to observe metal use. Nonflam-
odor. Contains odor. Contains metal condition metal condition metal condition mity. Flamma- metal condition metal condition condition and mable. Non-
no paraffin or no paraffin or and markings. and markings. and markings. ble. Corrosion and markings. and markings. markings. Safe polluting. Corro-
wax. Corrosion wax. Corrosion Flammable. Flammable. Flammable. inhibitors Flammable. Flammable. and easy to use. sion inhibitors
inhibitors inhibitors Corrosion inhib- Corrosion inhib- Corrosion inhib- present. Corrosion inhib- Corrosion inhib- Nonflammable. present.
present. present. itors present. itors present. itors present. itors present. itors present. Non-polluting,
Corrosion inhib-
itors present.
'EXTERNAL PIPE COATING COVERAGE GUIDE

FOR TUBING, CASING AND DRILL PIPE
PIPE SIZE M 1 1V4 1Vfc 2Vi6 2V6 2% y/z 4 4W> 5 SVl 6 6*4 7 7*4 8tt 9*fe 1034 11^4 134* 16 20
OUTSIDE DIAMETER IN INCHES
COVERAGE 120 9.7 7.7 6.6 6.1 5.1 4.2 3.3 2.9 2.4 2.1 1.8 1.6 1.4 1.2 1.1 1.0 .9 .8 .7 .6 .5 .4
JOINTS PER GALLON
•INTERNAL PIPE COATINGS WILL COVER APPROXIMATELY TWICE (2 TIMES) AS MANY JOINTS AS SHOWN ABOVE.
NOTE: THESE COVERAGE ESTIMATES ARE BASED UPON APPLICATION AT RECOMMENDED RATES AND MAY VARY
DEPENDING UPON THE APPLICATION AND SPRAY EQUIPMENT.
PACKAGING: PROTEKTO-COAT COATINGS are available in 5 gal (18.9 I) pail and 55 gal (208.2 I) drum.

5107
WIRELINE PRODUCTS
GREASE SEAL 765

PRODUCT VISC. CP RANGE PRODUCT SELECTION
CHART 16-20 VISC.
TEMPERATURE VS VISCOSITY
No. 767 10 750- 850
3 3 ^ 3 3 3 5 , 3
ATMOSPHERIC TEMPERATURES
No. 768 12 1,900-2,100
No. 770 16 4,500- 5,500
No. 774 20 15,000-16,500
No. 776 24 21,000-24,000 765A 7658 765C 7650 765E 765F 7656
GREASE SEAL PRODUCT
LIQUID-O-RING WIRELINE LUBRICANTS and SEAL-

ANTS provide protection against hydrogen sulfide con-
GREASE SEAL centration levels of up to 5% (50,000 PPM); extra
765,767, 768, 770, 774 and 776 inhibition is available upon request. Special grades are
Wireline Lubricants and Sealants also available for use in CO2 environments.
LIQUID-O-RING WIRELINE LUBRICANTS AND SEAL-
For viscosity ranges of LIQUID-O-RING 767, 768, 770,
ANTS, with corrosion inhibitor, are designed for more
774 AND 776 see Viscosity Chart. 765 (A-G) is a 16 to 20
effective and ease of wireline operations. WIRELINE
viscosity productfortemperatures below 50°F. See Prod-
LUBRICANTS and SEALANTS are recommended for
uct Selection Chart to match the correct product with the
operations where high pressures exist, thus providing
expected application temperature.
better seal retention. In addition to maintaining and hold-
PACKAGING: ALL WIRELINE PRODUCTS are available in 5 gal (18.9 I) pails and 55 gal
ing higher seal pressures, WIRELINE LUBRICANTS (208.2 I) drums.
and SEALANTS will reduce the friction of the wireline,
thus keeping wear down to a minimum. WIRELINE
LINE SPRAY 772
LUBRICANT and SEALANT will retain higher working
Wireline Corrosion Inhibitor
pressures, resulting in reducing the loss of fluids or gas
from the well. WIRELINE CORROSION INHIBITOR 772 will protect
braided wireline against the corrosive effects of acids,
TYPICAL OBSERVATIONS caustics and most chemicals, including hydrogen sulfide
No. 767, No. 768, No. 770, No. 774, No. 776 and salt water. Its special wetting ingredients penetrate
Color Golden Yellow the surface down to the inner core of the wireline.
Texture Tacky
API Gravity 28-30 TYPICAL OBSERVATIONS/LINE SPRAY 772
Flash Point COC °F min 480°F
Fillers None Color Golden Yellow
Alkali Nil Average Specific Gravity (a 60°F 0.87
Oxidation Stability Very Good Water Resistant Yes
Rust Inhibited Yes Odor Mild Hydrocarbon
Corrosion Inhibited Yes
Flash Point ASTM D-93 200°F
Most effective under high shock conditions for the reduc- Fire Point ASTM D-93 230°F
tion of drip and splatter, the special cohesive and Free Alkali ASTM 128 None Detected
Evaporation Loss (ambiant) Nil
adhesive properties of WIRELINE LUBRICANTS and Salt Spray Resistance Pass
SEALANTS prevent well site contamination. Rust Test Pass
Active Corrosion Inhibitors Organic Sulfonates
Allgrades of LIQUID-O-RING WIRELINE LUBRICANTS and Carbonates
and SEALANTS are inhibited against the corrosive Other Properties Penetration Excellent
effects of acids, caustics, salt water and hydrogen sul- PACKAGING: ALL WIRELINE PRODUCTS are available in 5 gal. (18.9 I) pails and 55 gal.
fide. (208.2 I) drums.

5108
PUMP AND VALVE PACKINGS
LIQUID-O-RING SELF-MOLD 636

Moldable Pump & Valve Stem Packing
Made with LIQUILON®
SUPPLEMENTAL METHOD
SELF-MOLD in whole stick form or break in small pieces

if the stuffing box is small. SELF-MOLD may be applied to
stuffing boxes with or without lantern rings, as well as to
stuffing boxes with high fluid pressure or excessive
tolerances.
BASIC PROPERTIES OF SELF-MOLD
• Moldable • Repairs scored and pitted shafts • Simple to
apply Economical • Clean • Made with LIQUILON • Long
service life • Low coefficient of friction • Services extremes
of temperature and pressure • Reduces packing
inventory.
PACKAGING: Available in 11b (454 g) jars, 1 gal (8 Ib, 3.6 kg) pail. 16 gal (90 Ib, 40.8 kg) and
55 gal 300 Ib, 136.1 kg) drums.
SELF-MOLD services temperatures to 600°F(315°C),

and pressures to 20,000 psi and is unaffected by acids,
oils, caustics or common solvents. Because of its LIQUID-O-RING SEMI-LIQUID
LIQUILON properties, it repairs scored and pitted shafts PACKING
and reduces wear. Regardless of size and shape of the Emergency Pumpable Packing
stuffing box, SELF-MOLD forms itself to the configura- Made with LIQUILON®
tion of the box and shaft, and compensates for wear by
remolding itself. SELF-MOLD eliminates the need for SEMI-LIQUID PACKING is recommended for the elim-
stocking various sizes and types of packing. ination of downtime in centrifugal, reciprocating, polish
rod and valve stuffing boxes. An injectable packing,
The LIQUID-O-RING application calculator is a handy SEMI-LIQUID PACKING services pressures to 20,000
slide rule with a sliding scale which converts from RPM to psi, temperatures to + 600°F, ( + 315°C), and surface
FPM and shows the suitability of SELF-MOLD. speeds to 1,000 fpm. It provides superior sealing and
SELF-MOLD is recommended as a supplement to pol- lubrication while repairing scored, pitted and damaged
ished rod stuffing boxes, centrifugal and reciprocating shafts with constant use. Several types of stuffing boxes
pump packing, and for valves. It is highly recommended for oil well pumping units are designed by U.S. manufac-
for locations where equipment shutdown causes critical turers for trouble free and leak free operation utilizing
conditions. this product. SEMI-LIQUID PACKING is available in
threegrades: 505 forclose tolerances; 506 for tolerances
SELF-MOLD can be used as a supplement to worn con- up to 0.010 inch clearance and 507 for tolerances up to
ventional packing, or in intervals with conventional pack- 0.020 clearances.
ing. SELF-MOLD can be applied with shaft surface PACKAGING: Available in 11b (454 g) jars and cartridges, 1 gal (10 Ib, 4.5 kg) and 2 gal (20 Ib,
speeds up to 1000 fpm. Installation is simple. Apply 9.1 kg) pails, 16 gal (180 Ib, 81.8 kg) and 55 gal (600 Ib, 272.2 kg) drums.

5109
VALVE LUBRICANTS & SEALANTS
LIQUID-O-RING 61 VALVE KLEAN LIQUID-O-RING 602/2 VALVE SEAL

Valve Cleaner Premium Lubricant & Sealant
Acombination penetrantand lubricant, LIQUID-O-RING Made with TFE-fluorocarbon, LIQUID-O-RING 602/2
61 VALVE KLEAN isdesigned specifically to loosen those VALVE SEAL is unsurpassed in its lubricating and seal-
stuck or difficult to operate lubricated valves. It pene- ing capabilities for valves, valve stems and threaded fit-
trates and cleans residual gum, lacquerandrustdeposits tings. It is specifically formulated for resistance to acids,
left by valve lubricants. Continued use of VALVE KLEAN caustics, fuels, oils and solvents. VALVE SEAL is easy to
will prevent further buildup of these residues, thereby apply and reduces maintenance costs by extending
extending the life and performance of valves. VALVE valve life and preventing unscheduled shut downs. It
KLEAN is non-flammable and is compatible with most contains extreme pressure additives as well
valve lubricants. It services temperatures from as rust, corrosion and oxidation inhibitors. VALVE SEAL
- 40T (- 40°C) to + 400°F (+ 204°C). is compatible with most lubricants. It services tem-
PACKAGING: Available in cartridge pack (10 ea 14 oz, 397 g) cartridges and 5 qt (10 Ib, peratures from -70°F (-56°C) to +500°F ( + 260°C).
4.5 kg) pails.
SUGGESTED AREAS OF USE: -Plug Valves • Ball
LIQUID-O-RING 600/1 VALVE LIFE Valves • Gate Valves • Valve Stems • Threaded Fittings •
Lubricant & Sealant Packings • Most Gas Service (except oxygen) including
LIQUID-O-RING 600/1 VALVE LIFE is a superior valve butane, propane, odorants and steam.
lubricant and sealant which minimizes friction during the PACKAGING: Available in stick pack (12eaKsticks/pk),other stick sizes (A, B,C,D,G),and5qt
operation of valves. It is insoluble in water, non-separat- (10 Ib, 4.5 kg) pails.
ing, leak resistant and economical to use. VALVE LIFE

contains no soap thickeners and has no melting point. It is
LIQUID-O-RING 606 VALVE
resistant to hydrogen sulf ide, crude oil, diesel and oilfield (PEANUT BUTTER) LUBE
brines. VALVE LIFE contains rust and corrosion inhib- Specialty Lubricant & Sealant
itors. It services temperatures from -40°F (-40°C) to LIQUID-O-RING 606 VALVE (PEANUT BUTTER) LUBE
+ 500°F( + 260°C). is designed specifically for use on valves servicing gen-
eral oilfield and pipeline ladings such as WKM gate and
SUGGESTED AREAS OF USE: • Plug Valves • Gate ball valves. It provides extra corrosion protection,
Valves-High or Low Pressure Valves-Well Heads-Bear- extreme pressure lubrication and good sealing proper-
ings • Ball Valves • Hand Operated Valves • Motor Oper- ties to valves servicing general oilfield and pipeline lad-
ated Valves-Crude Oil Pipe Valves -Gathering Systems ings. PEANUT BUTTER LUBE is resistant to crude oil,
• Close Tolerance Valves • Corrosive Environments salt water and gas. It services temperatures from -20°F
PACKAGING: Available in stick pack (12 ea K sticks/pk), other stick sizes (A, B, C, D, G) and 5 qt (-28°C)to250°F|
(10 Ib, 4.5 kg) pails, 5 gal (40 Ib, 18.1 kg) pails and 16 gal (100 Ib, 45.4 kg) drums.
PACKAGING: Available in 5 qt (12 Ib, 5.4 kg) cans and 16 gal (150 Ib, 68 kg) drums.
——— 5> I iu* at£.ea HINU rH^ivMuiwva ueounir i lurxa —

A STICK B STICK C STICK D STICK G STICK J STICK K STICK
7 1 5
1
/4"x1 1 /2" %"Xl 1 /2" /ie" x 2'/a" /2" x 2W /e" x 3Vz 1</2"x81/2" 1 1 /2"Xl0 1 /2"
108 STICKS/BOX 72 STICKS/BOX 32 STICKS/BOX 28 STICKS/BOX 14 STICKS/BOX 12 STICKS/BOX 12 STICKS/BOX

5110
LIQUID-O-RING 607 VALVE PLUS in water, combats corrosion and eliminates waste.
CO2 Resistant Lubricant & Sealant LIQUILON is unaffected by acids, oils, caustics, or com-
mon solvents.
LIQUID-O-RING 607 VALVE PLUS is specially formu-
lated to provide superb lubrication and sealing to valves LIQUID-O-RING PLUG VALVE LUBRICANT 603
exposed to CO2 and other harsh environments. It is insol- (medium viscosity) is available in cartridge form for
uble in water, oilfield brine and hydrochloric acid. VALVE application to valves equipped with button head fittings.
PLUS is non-separating and does not absorb moisture. LIQUID-O-RING PLUG VALVE LUBRICANT 604 and
It has excellent leak resistance even when exposed to 605 are available in stick form for application to plug
environments such as hydrogen sulfide, gasoline, crude valves with a screw type injector or through a built-in
oil and diesel. VALVE PLUS does not contain bentonite or lubrication port.
soap thickeners and services temperatures from - SOT PACKAGING: 603 is available in 14 oz (397 g) cartridges.
(-450C)to400°F( + 204°C). 604 is available in B and J sticks.
605 is available in K sticks.
SUGGESTED AREAS OF USE: • Plug Valves • Ball PLUG VALVE LUBRICANT 603-HV
Valves • Gate Valves • Crude Oil Pipe Line Valves • Gath- High Viscosity For Heavy Duty Application
ering Systems Valves • Motor Operated Valves • Hand Made with LIQUILON®
Operated Valves • High or Low Pressure Valves
PACKAGING: Available in 5 qt (10 Ib, 4.5 kg)can; 2M>gal (20 Ib, 9.1 kg) can; Sgal (40 Ib, 18.1 kg)
PLUG VALVE LUBRICANT 603-HV keeps valves free
can; 16 gal (100 Ib, 45.4 kg) and 55 gal (400 Ib, 181.4 kg) drums. from freezing, allowing easy opening and closing. It pre-
vents liquid or gas from escaping, is insoluble in water,
PLUG VALVE LUBRICANT combats corrosion and eliminates waste. Packaged in
603,604 and 605 5 quart cans, 603-HV may be applied to plug valves in
Lubricant and Sealant a wide range of services.
Made with LIQUILON® PACKAGING: Available in 5 qt (4.7 I) cans.
*
Recommended as both a lubricant and sealant for plug

valves, LIQUID-O-RING PLUG VALVE LUBRICANT has Several of our greases are available for eco-
a wide compatibility range to enable application to valves nomical lubrication to valves. They include
in all industrial areas. LIQUID-O-RING PLUG VALVE Liquid-O-Ring 154,157 and 159. See Grease
LUBRICANT made with LIQUILON, keeps valves free section for packaging information.
moving, prevents liquid or gas from escaping, isinsoluble
PREMIUM LUBRICANTS & SEALANTS

LIQUID-O-RING 404 LIQUID-O-RING 404 is an all purpose lubricant and seal-
The All Purpose Lubricant and Sealant ant servicing temperatures to +600T ( + 315°C). Rec-
Made with LIQUILON® ommended for equipment operating over extended peri-
ods of time or where shutdowns are prohibitive.
404 THREAD SEALANT
LIQUID-O-RING 404 provides the best sealing and pro-
tection from galling and seizing and allows easy make-up
and break-out after long periods of use. It will not dry out,
harden or damage threads. Unlike tape type sealants,
LIQUID-O-RING 404 coats the entire thread surface and
eliminates the danger of a piece of shredded tape block-
ing the instrument lines or small openings. It effectively
seals the helical leak path. Manufacturers of sprinklers
for fire protection use LIQUID-O-RING 404 to make
installation simpler, protect against galling and seizing,
and positively stop leaks.
404 GASKET DRESSING
Resealing properties of LIQUID-O-RING 404 enhance
5111
the original gasket seal preventing fluid leakage. POLYMER 400 fills the needs of all lubrication require-
LIQUID-O-RING 404 allows easy removal of the gasket ments specifying grease lubrication. It replaces NLGI
eliminating the risk of scoring or scratching machined Numbers 1,2, and 3 in most applications. POLYMER 400
mating surfaces. exhibits extreme pressure (E.P.) properties, a highly
tenacious nature and exceptional water resistance.
404 GEARBOX LUBRICANT AND SEALANT
POLYMER 400 contains LIQUILON which plates the
Performance and efficiency are greatly improved.
contacting metal surfaces with a solid lubricant film. The
LIQUID-O-RING 404 coats gears and other metal sur-
solid LIQUILON film has the lowest coefficient of friction
faces thus reducing friction, heat build-up and noise. The
of any material available today and provides residual
LIQUILON circulates to affect a seal eliminating leaks.
lubrication for extended periods of time, even under
severe operating conditions. Because of the unique
404 APPLICATION GUIDE lubricating qualities provided by the presence of
System Capacity 404 LIQUILON, it allows lubrication intervals to be doubled.
Gallons Ounces POLYMER 400 services temperatures from - 25°F
1 3 (- 32°C) to 250°F (+ 121°C). It is unaffected by acids,
2 5 oils, caustics and common solvents, as well as salt water,
3 6 making it an excellent marine lubricant. It is recom-
4 7
mended for applications to automobile chassis, wheel
For smaller systems add 1 oz. #404 per quart. bearings, ball and universal joints, 5th wheels, pump
bearings, sump and bilge pumps, propeller shafts, out-
404 VALVE AND PUMP PACKING SUPPLEMENT board pressure fittings, pump stuffing boxes and valve
LIQUID-O-RING 404 improves performance of con- lubrication. In addition, POLYMER 400 is recommended
ventional packing by lubricating, sealing and protecting for oilfield applications for general greasing, crown block
the shaft. It may be used for "butter" packing or be lubricant and general rig lubrication.
pumped into the stuffing box. It also reduces downtime. PACKAGING: Available in 14 02 (396.9 g) cartridges, 5 gal (35 Ib, 15.9 kg) pail, 16 gal (120 Ib,
54.4 kg) and 55 gal (400 Ib, 181.4 kg) drums.
Similar sealing material is available in a convenient 1 oz.
squeeze tube as PLUS 41 LUBRICATING SEALANT.
PACKAGING: Available in 5 02 (141.7 g) brush top, and 11b (454 g) jars and cartridges, 1 gal
(9 Ib, 4,2 kg), 2gal(18lb, 8.2 kg) pails, 16gal(140lb, 63.5 kg) and 55 gal (475 Ib, 215.5kg) drums. WLR111
White Lead Replacement
LIQUID-O-RING WLR 111 WHITE LEAD REPLACE-
POLYMER 400 MENT is specially designed to replace white lead. It
Premium Multi-Purpose Water Resistant Lubricant contains no metallic lead or lead oxide. WLR 111 provides
Made with LIQUILON® a lubricating film greatly exceeding that of white lead. It is
a clean, white and easy to use compound. In pressing
applications where film lubrication is required, WLR pre-
vents bearings and gears from freezing or corroding on
the shaft. Mixed with light oils, WLR can be used as a
lubricant coolant for thread cutting, reaming, tapping and
drilling. WLR 111, when mixed with cutting oil in the same
ratio as the previously used white lead, will result in a
decrease of load conditions, and smoother, cooleropera-
tions as well as greatly extended tool life. It is an excellent
anti-seize compound, protects against corrosion, will not
harden and reduces torque requirements for make-up
and break-out.
PACKAGING: Available in 1 gal (10 Ib, 4.5 kg), 2 gal (20 Ib, 9.1 kg) and 3V5 gal (35 Ib, 15.9 kg)
pails.

5112
BEARING COMPOUND 101 COMPOUND protects against corrosion and damage

Film Forming Lubricant from rust, provides its own seal protecting against water,
Made with LIQUILON dirt and grime, and prevents boiling, foaming or wearing
out. BEARING COMPOUND may be applied with a
grease gun while equipment is running, thus eliminating
BEARING COMPOUND is a film forming material for downtime. It may also be applied by hand packing. In
bearing and anti-friction services. Made with LIQUILON, addition to being a lubricant, BEARING COMPOUND
the BEARING COMPOUND film guards the bearing sur- has applications as a gasket dressing, thread lubricant
faces and race against binding and seizing while provid- and an additive to conventional oils and greases.
ing the best residual lubrication. LIQUILON is unaffected PACKAGING: Availablein5oz(141.7g) brush top, 1lb(454g) jars and cartridges, 1 gal (8lb, 3.6
by acids, oils, caustics and common solvents. BEARING kg) and 2 gal (16 Ib, 7.3 kg) pails, 16 gal (130 Ib, 59 kg) and 55 gal (450 Ib. 204.6 kg) drums.
GREASES
TYPICAL OBSERVATIONS LIQUID-O-RING GREASES

150 151 153 154 155 156 157 159 167
TYPE Multi-purpose low General purpose, Multi-purpose Premium multi- High temperature Outside gear grease High temperature Multi-purpose Premium
temperature food grade purpose polymer mufti-purpose & high temp cable murit-purpose multi-purpose
dressing Bentone grease
THICKENER Anhydrous Calcium Anhydrous Calcium 12-hydroxy lithium Anhydrous Calcium Aluminum Lithium Stearate/12 Non-soap Lithium Lithium Complex
Benzoate/Stearate Hydroxy Stearate
COLOR Brown/Amber, Colorless Reddish brown Light green Green Black Tan Light Brown Med Tan
fairly transparent
NLGI GRADE 2 2 11/2 2 2 1VS 2 2 2
APPROX. - 65°to225°F 0 to + 270°F -10" to + 29QaF -Oto +250°F 0-295T + 25° to + 275°F to 4-490'F -20°to365°F -20° to 560*?
TEMP. RANGE (-55*to105'C) (-18°to132°C) {-23° to + 143°C) (-18to +121°C) (--18aC-146°O (-4° to +135°C) (t25«D) (-29°to185°C) (~29°1Q+293°C)
OIL
VISCOSITY
sus a ioor 75 900 2050 5000 1445 8270 750 1140 600
SUS@210°F 35 170 500 95 330 62 83 68
BASE OIL
VISCOSITY
INDEX 45 140 1t7 120 78 100 27 85 min. 90
TIMKEN LOAD
TEST ASTM
D-2509 45 55 45 45
_ 45 45 '\
DROPPING
POINT ASTM
D-566 f285°F(4-14Q°C) + 290eF( + 143°C) -*-3403F{1740Cj + 295°F ( + 146°C) -500°F (+279°C) + 300°F ( + 148°C) Over500°F( + 26QaC) + 350aF(177°C) 4 50Q"F (304°C) :
USES Bearings, chassis. Food machinery, Anti-friction bear- High & low speed Non- additive base Lubrication of open Plain & anti-friction Economy Lubricant Automotive wheel
Automotive, oitfield Excellent for rolling ings and journals, bearings, excellent grease for com- gear dryer rollers & bearings; Where- bearings & chassis
contact, ball and V-joints, water for ball joints & fifth pounding thread roller chains ever high temp- lubrication, all types ^
roller bearings pumps, chassis, wheels, universal compounds, multi- Winches, bull gears, erature & film of bearings, gears,
springs, general joints, chassis purpose greases bridge & locking forming grease coupling i
greasing & a wide variety of gears is required
specialty lubricants
REMARKS Water insoluble Odorless, tasteless, Low & high speed Highly adhesive, Good pumpabtlity, Highload carrying Rust & corrosion Good cool weather Good high Slow ':•
excellent rust Waterproof, contains application, cold to excellent mechanical low friction, excellent ability under extreme inhibitors, non- pump ability, water temperature ;;
protection, low to NO zinc oxide, lead hot temperature, wet stability, water proof, water resistance, pressures, extreme metting, waterproof insoluble, oxidation, eharactertics, goocH
very high speeds, or water, medium to running, heavy duty rust & oxidation higher heat resis- pressure agents, rust corrosion resistant water resistance, . '":
low to medium loads, high speeds, Anti- service, super water inhibitors extreme tance than most & corrosion inhibi- good rust protec-
anti-wear additives wear properties, demulstbility, excel- pressure additive soap, greases, high tors, water insoluble, tion, excellent .:-
USDA rating "AA" lent water washout, extreme pressure excellent resistance oxidation, stability, '•,
low density, good properties, anti-rust to washing, very resistance to me- }
flotation, highly inhibitors, excellent sticky & adhesive chanica! \
adhesive, consistency time & stringy & self breakdown, excel- •
outstanding rust temperature spreading lent E.P. properties-
& corrosion inhibitors characteristics
PACKAGING: Available in 14 oz (397 g) cartridge, 5 gal (35 Ib, 51 .? kg) pails and 55 gal (400 Ib, 181 .3 kg) drums. No. 157 is available in 5 gal (40 Ib, 18.1 kg) pails and 55 gal (440 Ib, 199.6 kg) drums.

5113
OILS
GX-HYDRAULIC OILS 939,940 and 941 GX UNIVERSAL TORSION FLUID 944
For Most Hydraulic Applications Multi-Purpose Lubricant
GX-HYDRAULIC OIL 939 is formulated as an economy

grade oil to be used in areas where premium blend oils
exceed requirements. Its relative high viscosity index
makes it suitable for systems that are subject to consid-
erable variation in operating temperatures. It is recom-
mended for non-circulating systems.
GX UNIVERSAL TORSION FLUID 944 is a premium
GX-HYDRAULIC OIL 940 is formulated for most quality, multi-purpose, grade 56 lubricant for tractors and
hydraulic applications. It is available in viscosity grades equipment that require a single oil for the lubrication of
46 and 68.940 is manufactured using the highest quality the transmission, differential, and final-drive gears. It can
base oil and a balanced combination of additives to also be used as the power brake and power take-off fluid
insure maximum protection to hydraulic equipment. Its and as the power steering fluid where mineral oils are
corrosion inhibitors and anti-oxidant stabilizer provides recommended. In "wet brakes", excellent control over
long life. 940 contains anti-wear, anti-leak and anti-foam brake chatter is maintained by GX UNIVERSAL TOR-
additives. It may be used in API motor oil services "SA" SION FLUID 944. The correct coefficient of friction for
and "SB" as non-detergent motor oil and for API gear hydraulic power-shift transmissions and clutch-driven
lubricant services as GL-1 and GL-3. It may also be used power take-off systems is also provided. It is compatible
in a variety of applications where general purpose non- with commonly used seal material.
detergent type oils are applicable.
GX UNIVERSAL TORSION FLUID 944's additive pack-
GX-HYDRAULIC OIL 941 is a premium anti-wear ages assure a high resistance to degradation due to
hydraulic oil that contains high levels of extreme pressure oxidation, plus provide excellent (extreme pressure) load
additives. It is formulated specifically for heavy-duty carrying capacity and wear protection. Pour point
equipment where extreme levels of pressure exist. 941 depressants allow prompt lubrication at temperatures
contains anti-wear, anti-rust, anti-foam and anti-oxidant as low as - 20°F (- 28°C). Other protection is provided
additives. against rusting, foaming, and water contamination.
PACKAGING: Available in 5 gal (18.91) pail, 16 gal (60.61) and 55 gal (208.21) drum. PACKAGING: Available inSgal (18.11) pail and16gal(60.6l) and 55 gal (330lb, 150 kg)drums.
OILCENTER RESEARCH, INC. 19

5114
INDUSTRIAL GRADE ens gear noise, is non-flammable, withstands gear and

cable pressures and prevents corrosion. It will not drip,
GEAR OILS 750 and 751
wash off or shear off. OPEN GEAR LUBRICANT is rec-
Multi-Viscosity E.P. Gear Lubricants
ommended for all open gears, chains, cables, wire ropes
GEAR OIL 750 and 751 are our best quality multi-vis- and any heavy outdoor service.
cosity E.P. gear lubricants. Sulfur-Phosphorus type gear PACKAGING: Available in 5 gal (50 Ib, 22.7 kg) pail, 16gal (120 Ib, 54.4 kg) and 55 gal (400 Ib,
lubricant for API Services GL-3 through GL-5, 750 and 181.4 kg) drums.
751 meet MIL-21058 performance level.

GX CUTTING OILS
GEAR OIL is also available with the addition of 822-LIGHT DUTY
LIQUILON. LIQUILON forms a film between the gear 824-MEDIUM DUTY
teeth preventing metal-to-metal contact thereby reduc- 828-HEAVY DUTY
ing friction and noise. It is highly adhesive which keeps
theoil on the teeth protecting the gears against corrosion. GX CUTTING OILS are sulfonated fluids that provide
750-L and 751-L retain sufficient viscosity even at high- cooling and meet a wide range of anti-weld and lubrica-
est operational temperatures to lubricate the gears and tion requirements. From mild oils for soft metals and light
act as a coolant. It has good dimulsibility permitting rapid duty cutting or grinding to heavy duty oils for hard metals
separation of water and is foam resistant. and broaching, threading, tapping or difficult machining
operations, GX CUTTING OILS provide increased tool
life and better surface finish.
SAE VISCOSITY, SUS FLASH
PRODUCT GRADE (a 100°F. (« 210°F. POINT, °F. PACKAGING: Available in 5 gal (18.91) pails and 55 gal (208.21) drums.
710 8S-90 1030 90

751 90-140
GX WATER SOLUBLE CUTTING OILS
832-LIGHT DUTY
LIQUID-O-RING GEAR OILS are also available in a 834-MEDIUM DUTY
climbing (C) grade that is continually pulled toward the 838-HEAVY DUTY
gears, causing the lubricant to climb and remain in place
as long as the gear is in motion. By doing this, 750-C and GX WATER SOLUBLE CUTTING OILS mix easily with
751-C provide a film on the entire gear. This action water to form stable emulsionsfor cooling and lubrication
reduces metal-to-metal contact thereby reducing friction of machined surfaces. Available in light, medium and
and noise. Our premium Liquid-O-Ring Gear Oils made heavy duty grades, they provide excellent anti-rust, anti-
with LIQUILON® add film forming solid lubrication which bacterial and anti-gumming characteristics. GX WATER
extends service life of equipment. SOLUBLE CUTTING OILS are suited for grinding, mill-
ing, boring, and turning on ferrous and non-ferrous
PACKAGING: Available in 5 gal (35 Ib, 15.9 kg) pail and 16 gal (115 Ib, 52.2 kg) and 55 gal
(400 Ib, 181.3 kg) drums.
metals.
PACKAGING: Available in 5 gal (18.91) pails and 55 gal (208.21) drums.
PENETRATING OIL 920

PENETRATING OIL 920 combines active penetrating GX SYNTHETIC CUTTING FLUIDS
solvents with highly refined oil to provide the most useful 842-LIGHT DUTY
tool in your tool box. It removes moisture from surfaces 844-MEDIUM DUTY
and leaves a film that protects against further intrusion. 848-HEAVY DUTY
PACKAGING: Available in 5 gal (35 Ib, 15.9 kg) pail, and 16 gal (115 Ib, 52.2 kg) and 55 gal
(400 Ib, 181.3 kg) drums. GX SYNTHETIC FLUIDS are water-based machining
fluids for various cutting and cooling requirements. True
solutions, they have no solids and are not emulsions.
They do not contain mineral oils. GX SYNTHETIC CUT-
OPEN GEAR LUBRICANT 760
TING FLUIDS are designed to improve "slip and cutting"
Made with Moly
and impart good metal conditioning properties. They
Manufactured using moly-disulfide, graphite and an provide protection against corrosion and bacterial
extreme pressure additive, OPEN GEAR LUBRICANT growth. GX SYNTHETIC CUTTING FLUIDS are avail-
reduces friction and wear by forming a continuous lubri- able in single point machining and threading fluids.
cation film on the surface. A solid film lubricant, it damp- PACKAGING: Available in 5 gal (18.91) pails and 55 gal (208.21) drums.
20 OILCENTER RESEARCH, INC.

5115
OIL ADDITIVES
GX-SEAL HYDRAULIC FLUID GX-SAFETY SEAL
ADDITIVES Sealant For
The First Lubricant and Sealant Ever Surface or Sub-surface Control Safety Valves
Developed For Hydraulics Made with LIQUILON®, GX-SAFETY SEAL is a specially
Made with LIQUILON® designed sealant for surface or subsurface controlled
safety valves. It eliminates leaks and weeping joints,
reduces foaming, maintains tighter seals and valve seat-
ing and reduces corrosion. The unique lubricating
qualities of GX-SAFETY SEAL increase the life of
hydraulic and cylinder components and remain effective
during initial start-up and over long periods. GX-SAFETY
SEAL will not alterthe viscosity of the hydraulic fluid in the
system when used as recommended. Available in four
premium grades, it can be used in multi-well installation,
and can be applied to storage well safety valve installa-
tions. The contents of one container is sufficient for a
2 to 8 gallon system.
PACKAGING: Available in 11 oz (325 ml) zip top cans.
PLUS OIL TREATMENT

Engine Oil Treatment
GX-SEAL IS AVAILABLE IN 4 GRADES: Made with LIQUILON®
Hydrocarbon Water & Glycol
Type of Leakage Systems Systems
For weeping joints GX-Seal 701 GX-Seal 801
For pinhole leaks GX-Seal 702 GX-Seal 802
GX-SEAL hydraulicfluid additives made with LIQUILON,

eliminates weeping joints and sluggishness of hydraulic
systems while providing superior lubrication. GX-SEAL
reduces friction and temperatures allowing the entire
system to operate cooler and more efficiently. It inhibits
corrosion and rust, stabilises fluid viscosity and controls
caviation. GX-SEAL eliminates leaks by forming a seal
from within while the equipment is operating.
GX-SEAL APPLICATION CHART PLUS OIL TREATMENT, made with LIQUILON®, is an

effective sealant and lubricant exhibiting extreme pres-
Hyd. SYSTEM, Gal. GX-Seal, 11 oz. Can
sure characteristics. PLUS,asitcirculatesthroughout
1000 12 the oil system, SEALS costly and dangerous leaks. By
500 10 practically eliminating friction, PLUS increases gasoline
100 6 mileage. PLUS lubricates with a film that actually pene-
50 4
25 3
trates metal surfaces. It is recommended for the crank-
2 1 case of both old or new cars. Simply add one can per
5 quart system. Repeat application every 5,000 miles.
PACKAGING: Available in 11 oz (325 ml) can. PACKAGING: Available in 11 oz (325 ml) cans.

5116
pm
DRILLING AND WORKOVER PRODUCTS

HYPOSEAL 527 and 528 OCR577
Stops Tubing and Casing Leaks Drilling Fluid Lubricant
DRILLING FLUID LUBRICANT 577 is a multi-purpose
lubricant, compatible with oil and water based drilling
fluid systems. 577 is a non-polluting, non-formation
damaging, solids-free system with good lubrication and
shale inhibitive qualities. It chases ferrous metal making
it an ideal stuck pipe remedy. Its shale inhibitive qualities
help prevent sloughing or heaving shale, and bit balling
while drilling "gumbo" shale.
Safe and easy to use; 577 is non-fluorescing, bio-
degradable and non-toxic. It will not adversely affect the
viscosity or fluid loss properties of the mud system.
PACKAGING: Available in 5 gal (35 Ib, 15.9 kg) pail, and 55 gal (330 Ib, 149.7 kg) drum.
LIQUID GEL 536

Pourable Workover Polymer
HYPOSEAL is designed for sealing leaks in tubing, cas-
ing, surface units, pressure control equipment, well head LIQUID GEL536 is apourable liquid system that incorpo-
flanges and production lines. A seal can be effected even rates the highest quality oilfield grade of polymer cur-
in instances where the exact location of the leak can not rently available. 536 is designed for use on rig sights
be determined. Made with LIQUILON®, HYPOSEAL where mixing equipment is minimal. Full viscosity (free of
controls leakage in operating systems within the "fish eyes") will occur with a slight mixing action. Pack-
petroleum, petro-chemical and general industries. aged in 5 gallon pails, 536 contains a full 18 Ibs. of active
LIQUILON® is inert and unaffected by acids, oils, polymer. No special provisions or weather-proofing is
caustics, common solvents or extreme well conditions. needed for storage in the field.
PACKAGING: Available in 5 gal (40 Ib, 18.1 kg) pails.
HYPOSEAL's one step application saves time; it elimi-
nates the need for rigging up for a workover job, pulling
tubing or disassembling processing equipment. It is
effective on oil or gas wells and on-stream work in refin- INSTANT PLUG
eries and plants. Its sealing characteristics are aided by Solids-Free Lost Circulation Material
differential pressure to form a seal-lock action from INSTANT PLUG is pumped down hole in a watery consis-
within. HYPOSEAL services temperatures up to 550°F tency and sets up at a predetermined time, into a semi-
(287°C). A strong, resilient, permanent seal is provided. plastic mass. It can be weighted with conventional weight
The ID of the line is not reduced by the use of this product. materials, and can be mixed in fresh and most salt water
HYPOSEAL is provided in a concentrated form in 5 gal- systems.
lon pails. Mixing can be performed easily on location with PACKAGING: Available in 50 Ib (22.3 kg) plastic lined sacks.
as little equipment as an empty drum and a paddle. It can

be mixed in fresh or salt water. No special provisions or
weather-proofing is needed for storage in the field. HYDROGEL
Solids-Free Polymer Workover Fluid
HYPOSEAL is available in two grades: 527 is for open-
ings up to 0.1 inch (effective for most small leaks) and 528 HYDROGEL is a cold water soluble polymer in powder
for openings up to .20 inch (recommended for large form. It is ideal for workovers and light duty drilling opera-
leaks). One HYPOSEAL KIT is recommended for every tions where a solid free system is desirable. It viscosifies
2,500 feet (762m) of 2%" or 2%" tubing. in fresh and most salt water systems.
PACKAGING: available in 5 gal (50 Ib, 22.7 kg) pail. PACKAGING: Available in 50 Ib (22.3 kg) plastic lined sacks.

5117
SPECIALTY PRODUCTS
WONDER 900
Rust Remover and Primer INDUSTRIAL & OILFIELD CLEANERS
950 RIG KLEEN

All synthetic, biodegradable rig washing compound;
Contains no caustics; Effective in hot or cold, hard or soft,
fresh or salt water; Ideal for removing dirt, grease and oil
from rig equipment or fixtures.
PACKAGING: Available in 25 Ib (11.3 kg) boxes, 50 Ib (22.7 kg) pails, 100 Ib (45.4 kg) and 300 Ib
(136.1 kg) drums
9563 SUPER CUT OILFIELD DEGREASER

A concentrated, heavy duty, liquid cleaner; Removes
grease, oil and dirt from rig tools, machinery and equip-
ment; Engineered for use offshore; Non-flammable;
Biodegradable; Has no flash point; Contains no solvents.
PACKAGING: Available in 5 gal (18.91) pails and 55 gal (208.2 kg) drums
959 HANDY CLEAN WATERLESS HAND CLEANER

Formulated for working handsexposedtodirtgrease and
grime; Quick-acting for fast, safe hand cleaning without
water; Contains lanolin.
PACKAGING: Wt Ib (680 g) and 7 Ib (3.2 kg) jars
1091 MEAN & GREEN HEAVY DUTY CLEANER

WONDER is specifically developed and manufactured Superior heavy-duty, biodegradable, liquid cleaner; high
as the most effective answer to corrosion problems. With sudsing, safe, economical, all-purpose; Can be diluted
ferrous metals,, WONDER reacts with the ferric oxide to with hot or cold, hard or soft, fresh or salt water for a multi-
form a hard, dark and impervious protective coating. tude of cleaning requirements.
WONDER cleans and brightens non-ferrous metal sur- PACKAGING: Available in case lots of 12-1 qt (0.91) and 6-1 gal (3.81), 5 gal (18.91) pails and 55
faces without the damaging effect of sand blasting and gal (208.2 kg) drums
will provide an excellent surface for the application of
paint or other protective coatings. WONDER'S reaction 1092 AT-5 -5 IN 1 CLEANER
with non-ferrous metals or new, clean metal, will provide A liquid detergent, car and truck wash, steam cleaner,
a surface that more readily bonds with paint and, as degreaser and rig wash; Mixes easy; Will not settle; Non-
a result, will increase the life of paint on metal surfaces. flammable; Non-toxic; Biodegradable; Concentrated for
top cleaning in fresh or salt water, for use offshore and in
WONDER As A Rust Remover industrial applications.
Apply WONDER to the rusted surfaces. Allow to set for PACKAGING: Available in case lots of 6-1 gal (0.91), 5 gal (18.91) pails and 55 (208.21) drums
five minutes, then flush with water.
991 MIGHTY MULSE EMULSIFYING DEGREASER
WONDER As A Paint Primer An outstanding concentration of degreasers and emulsi-
Asaprimer, apply to rusted surfaces. Allowtoairdry com- fiers; Can be diluted to meet cleaning requirements.
pletely and paint immediately. The coating formed by the
PACKAGING: Available in case lots of 6-1 gal (3.8 I), 5 gal (18.9 I) pails and 55 gal (208.2 I)
WONDER protects against further corrosion. drums
WONDER reacts with the rusted surface to actually

make the rust part of the metal and creates a protective FLOOR CLEANERS
shield against corrosion. It can be applied by brushing,
dipping, rolling mopping or spraying. Cover over 1000
sq. ft. per gallon. 9541 GOLDEN YELLOW CONCRETE CLEANER
PACKAGING: Available in 1 qt (0.9 I), 1 gal (3.8 I) and 5 gal (18.9 I) containers, and 55 gal
Powdered cleaner for concrete floors and driveways;
(208.2 I) drums. Non-caustic; Effective in hard or soft water; Easily
5118
removes grease and oil; Great for areas of high pedes- 9572 ECONOMY LOW FOAM LAUNDRY
trian traffic. DETERGENT
PACKAGING: Available25 Ib (11.3 kg) and 50 Ib (22.7 kg) boxes, 100 Ib (45.4kg), 350 Ib (158.8 Economical compound for home and commercial use;
kg) and 500 Ib (226.8 kg) drums
Low sudsing; Low phosphate; Biodegradable; Rinses
free and clean.
9565 FOOD PLANT CLEANER & HARD SURFACE PACKAGING: Available in 25 Ib (11.3 kg) and 50 Ib (22.7 kg) boxes, 100 Ib (45.4 kg) and 350 Ib
CLEANER (158.8 kg) drums
Concentrated powder for removal of grease and dirt from 9530 PEROXYGEN DRY POWDER BLEACHING
floors, walls and equipment in food processing plants. COMPOUND
PACKAGING: Available in 25 Ib (11.3 kg) and 50 Ib (22.7 kg) boxes, 100 Ib (45.4 kg) and 400 Ib (181.4 A non-chlorine compound; Effective in all temperatures;
kg) drums
Safe for use with permanent press, wash and wear,
whites, color-fast prints, synthetics and natural fabrics.
CAR AND TRUCK WASHES PACKAGING: Available in 25 Ib (11.3 kg) and 50 Ib (22.7 kg) boxes, 100 Ib (45.4 kg) and 300 Ib
(136.1 kg) drums
9554 SUPER PINK CAR AND TRUCK WASH 9580, 9581 CHLORINE DRY POWDER BLEACHING
Formulated for superior results in automatic wash COMPOUND
systems; High sudsing. Formulated and manufactured primarily for use on white
PACKAGING: Available in 25 Ib (11.3 kg) and 50 Ib (45.4 kg) boxes, and 300 Ib (136.1 kg) fabrics; Bleaches and removes stains; 9580 10% chlo-
drums rine; 9581 20% chlorine.
PACKAGING: Available in 25 Ib (11.3 kg) and 50 Ib (22.7 kg) boxes, 100 Ib (45.4 kg) and 300 Ib
9551 DELUXE WHITE CAR AND TRUCK WASHES (136.1 kg) drums
The very best in a car and truck washing product; Con-

centrated for brush, wand or in automatic systems. DISHWASHING DETERGENTS
PACKAGING: Available in 25 Ib (11.3 kg) and 50 Ib (22.7 kg) boxes, 100 Ib (45.4 kg) and 350 Ib
(158.8 kg) drums
9520 D-13 AUTOMATIC MACHINE DISHWASHING
9552 THRIFTY CAR AND TRUCK WASH POWDER
Good all-around formula for washing by hand, or in auto- Premium product; Designed specifically for dish washing
matic systems. machines; Breaks down heavily soiled deposits on pots,
PACKAGING: Available in 25 Ib (11.3 kg) and 50 Ib (45.4 kg) boxes, and 300 Ib (136.1 kg) drums pans, dishes, glasses and silverware; Non-caustic; For
hard and soft water.
9553 ECONOMY CAR AND TRUCK WASH PACKAGING: Available in 25 Ib (11.3 kg) and 50 lb(22.7kg)boxes, 100 lb(45.4kg)and 350 lb(158.8
Priced for economy; Formulated for good cleaning; kg) drums
Medium sudsing. 9573,9574 JOLLY SUDS LIQUID DETERGENT

PACKAGING: Available in 25 Ib (11.3 kg) and 50 Ib (45.4 kg) boxes, and 300 Ib (136.1 kg) drums General purpose liquid cleaner; Concentrated; Can be
diluted for many cleaning requirements; Safe on metals,
wood, plastic and painted surfaces; Excellent for brush and
LAUNDRY DETERGENTS & BLEACHES steam cleaning equipment.
PACKAGING: Available in case lots of 6-1 gal (3.81), 5 gal (18.91) pails and 55 gal (208.21) drums
9570 PEROXYGEN LOW FOAM LAUNDRY 9603 MARINE SOAP

DETERGENT Designed for dishes and general cleaning; Mild, low-foam,
Concentrated, all temperature detergent with a color-safe biodegradable, powdered detergent; Gentle on hands;
bleach; Whitens, brightens and enhances color; Stain Effective in hot or cold, fresh or salt water; Ideal for use
removing formula. offshore.
PACKAGING: Available in 25 Ib (11.3 kg) and 50 Ib (22.7 kg) boxes, 100 Ib (45.4 kg) drums
PACKAGING: Available in 25 Ib (11.3 kg) and 50 Ib (22.7 kg) Boxes, 100Ib (45.4 kg) and300 Ib (136.1
kg) drums 9590 & 9591 (G-77), 9592 (G-88) SPECIAL
HANDWASHING POWDERS
9571 PREMIUM LOW FOAM LAUNDRY DETERGENT All purpose mild cleaners for washing by hand; high foam-
Concentrated, low-sudsing compound for home and ing action softens hard water; Non-irritating; For metal,
commercial use; Low-phosphate; Biodegradable; For wood, plastic and painted surfaces; G-88 — premium;
hot or cold water. G-77 — economy.
PACKAGING: Available in 25 Ib (11.3 kg) and 50 Ib (22.7 kg) boxes, 100 Ib (45.4 kg), 350 Ib (158 PACKAGING: Available in25 Ib(11.3 kg) and 50Ib(22.7kg) boxes, 100 Ib (45.4kg) and 350Ib (158.8
kg) and 400 Ib (181.8 kg) drums kg) drums

5119
tJSSS^fSSSSSSfl^^m iNTERNATIONAL DISTRIBUTOR!6 PB^MSHBfflBnHHHHIB
^^^^^^^^^^^^^H I * ^•^^^•^^^•^H
^^^^^^ For more information contact
($2^1 OIL CENTER RESEARCH INTERNATIONAL, INC.

p BOX
*k i^Ksi/Cm ° 5 1 8 7 1 / L A F A Y E T T E , LOUISIANA U.S
A. 70505 / (318)232-2496 / T E L E X 586650 / CABLE: OILCERE
CONTINENTAL EMSCO COMPANY Verona, Italy SAUDI ARABIA

AUSTRALIA LIMITED Phone: (045) 7702389 WEATHERFORD (SAUDI ARABIA)
L. A. ARNOTT NOMINEES PTY. LTD. P. O. Box 669 Telex: 480148
3 Capricorn Avenue LTD.
Estevan, Saskatchewan S4A 2A6 P. O. Box 623
Doncaster East 3109 WEATHERFORD ITALIANA S. P. A.
Victoria ESTEVAN METER SERVICES LTD. Via Rubicone. 37 Dhahran International Airport
Phone: (03) 842-3984 P. O. Box 355 48100 Ravenna Saudi Arabia
Estevan, Saskatchewan S4A 2A4 Phone: 39-544-62534 Phone: 996-3-8649945
PLUS PRODUCTS PTY. LTD. Phone: (306) 634-5304 Telex: 670341
9 Stanley Street
South Brisbane, Queensland NORTHERN METALIC SALES
4101 (YUKON) LTD. IVORY COAST SCOTLAND
Phone (07) 447115 4244-4th Avenue WEATHERFORD OIL TOOL GmbH WEATHERFORD U.K. LTD.
Whitehorse, Yukon Territory C/O Soaem Cl Kirkhill Industrial Estate
WEATHERFORD AUSTRALIA Phone: (403) 667-4255 Abidjan 01 Dyce, Aberdeen AB2 OES
PTY. LTD. Phone' 414740 Phone: 0224-723193
9th Floor, Law Chambers GUATEMALA Telex: 2666 Telex: 73146
Cathedral Square POAMPQA QA
UUAIVIroA ort
Perth, W. A. SINGAPORE
15 Calle 6-38 JAPAN
Zona 10 ANZAI COMMERCE COMPANY WEATHERFORD OIL TOOL
AUSTRIA Oficina 403 C/O KYODO Building 2-18-7, 6th Floor (PTE.) LTD.
WEATHERFORD OIL TOOL GESMBH Guatemala, Guatemala Higashi-Ueno, Taito-KU 11 Dhoby Ghaut #09-04
A-3012 Wolfsgraben Bei Wien Phone: 370 971 Tokyo 110 Cathay Building
Bienntenmaisstr 47 Telex: 5612 PetroGu Singapore 0922
FUJI TRADING COMPANY Telex: 23814
BANGLADESH Nikkei Koraibashi Building 1-1
COLUMBIA Koraibashi, Higashi-KU
FIVE FEATHERS COAMPSA DE COLUMBIA Osaka SOUTH AFRICA
59, DilkushaC/A Y CIA. LTDA. STONESTREET & HANSEN
Phone: (06) 222-5012
(3rd Floor) Carrera 8a No. 65-81 P. O. Box 8142
TG!GX' 5229112
Dhaka, Bangladesh Apartado Aereo 03883 Elandsfontein 1406
Phone: 259690 Bogota, Columbia Transvaal
Telex: 65709 Phone' 249-9834 KOREA Phone: 3605131
Telex: 41398 FEA-CO RICHWOOD TRADING COMPANY Telex: 8-0460 SA
LTD.
CANADA 9th Floor
MAINLAND OILFIELD SUPPLY ENGLAND Woo Sung Bldg. SPAIN
Division of Bow Valley Resource WEATHERFORD OIL TOOL U. K. LTD. 35, Bookchang-Dong, Chung-Ku C.O.R.A.T., S.A.
Services Sauls Wharf. Cobholm Seoul, Korea Consejedo Ciento 345
630 Sixth Avenue S. W. Great Yarmouth, Norfolk Phone: 778-2351 Barcelona 7
Calgary, Alberta T2P 2V8 Phone: 57516 Telex: K27576 RICHWD Phone: 215.45.36
Phone: (403) 259-2220 Telex: 97463 Telex: 83151586
CHESTER INDUSTRIAL TOOL MALAYSIA
SUPPLY FRANCE WEATHERFORD/LAMB (m)
TUNISIA
5544-5th Street S. E. WEATHERFORD'STABYLIAS. A. SDN.BHD. WEATHERFORD OIL TOOL GmbH
Calgary, Alberta T2H1L3 18 Rue Goubet Sangara & Co. Villa Amira
Phone: (403) 259-4262 75940 Paris Cedex 19 3rd Fl., Bangunan Ming Rue Sidi Abdel Aziz
Phone: 33-1-2006701 Jalan Bukit Nanas Marsa Plage
CONTINENTAL EMSCO COMPANY Tunis,
LIMITED
Telex: 240589 Kuala Lumpur 04-01
Phone: KL 560332 Phone:216-1-271109
605-444 7th Avenue S. W. Telex: 13547
Calgary, Alberta T2P OX8 GERMANY
DEUTSCHE FIBERCAST GmbH NETHERLANDS
MAINLAND OILFIELD SUPPLY Postfach 1410, Feldenend NETHERLANDS OIL TOOL SUPPLY
UNITED ARAB EMIRATES
Division of Bow Valley Resource D513 Eschweller WEATHERFORD OIL TOOL
5925-99th Street BV
Telex ' 832195 MIDDLE EAST LTD.
Edmonton, Alberta T6E 3N8 P. O. Box 52
Coevorden. P. 0. Box 4503
WEATHERFORD OIL TOOL GmbH Flat 702, 7th Floor
N. L. RUCKER PRODUCTS P.O. Box 1380 Telex: 36241
8503 Davies Road Abdulia AI-Mazr
3012 Langenhagen 1 WEATHERFORD OIL TOOL Abu Dhabi
Edmonton, Alberta T6E 4N3 Hannover
Phone: (403) 465-7536 NEDERLANDBV Telex: 22644
Phone: (0511) 732021/2 P. O. Box 5, 9636ZG Phone: 825963
RIG SERVICE & RENTALS LTD Telex: 924666 Zuidbroek, (GR)
9515-62nd Avenue Phone: (05985) 1645/646 WEATHERFORD OIL TOOL M.E. LTD
Edmonton, Alberta GREECE Telex: 53457 P. O. Box 4627
IMPERIAL EQUIPMENT LTD. WEATHERFORD OIL TOOL GmbH NIGERIA Dubai
611 DunedinSt. P. O. Box 87 WEATHERFORD OIL TOOL Telex: 45613
Victoria, B. C. V8T267 Paleo Psihiko COMPANY Phone: 432550/432050
Canada Athens P. O. Box 387
Phone: 30-1-6715864 Port Harcourt VENEZUELA
NORTHERN METALIC SALES LTD. Telex: 0067-216343 Phone: 330440-332554 TUBULAR SERVICES. C.A.
9729 17th Street Tlx: 61241 Calle 78 No. 10-30
Dawson Creek, British Columbia HUNGARY Edit. Vijuper Local 6
BEARING SUPPLY (CANADA) LTD. CHEMOKOMPLEX NORWAY Maracaibo
472 Notre Dame Avenue VI Nepokoitarsagag WEATHERFORD OIL TOOL Phone: 79-131
Winnipeg 2, Manitoba R3B 1R7 Utja 60 COMPANY Cable: TUBCO
Phone: (204) 947-0101 P. O. Box 141 P. O. Box 5053
MONROE AUTO EQUIPMENT
Budapest H-1389 Norsea Base Dusavik WEST INDIES
1400 17th Street East 4001 Stavanger ROOKS OILFIELD & ENGINEERING
Owen Sound, Ontario N4K SZ9 INDIA Phone: (47-4) 541077 SUPPLIES
Phone: (519) 376-9650 KAMLASHANKAR P JOSHI & CO. Telex: 33227 P. O. Box 74
Petroleum & Mining Div. San Fernando, Trinidad
T. P. S. INDUSTRIES INC. 601, Prasad Chambers PAKISTAN
P. O. Box 131 Swadeshi Mills Compound INDENTORS INTERNATIONAL INDUSTRIAL AGENCIES, LTD.
#400 & 89 Highways Bombay 400 004 P. O. Box 8926 P. 0. Box 149
Cookstown, Ontario LOL 1LO Telex: 3591 81/2, 82/2 Haque Building 18 Lady Hailes Avenue
T. P. S. INDUSTRIES INC. Central Commercial Area San Fernando, Trinidad & Tobago
ITALY P. E. C. H. S. Karachi 29 Phone: 65-78561-4
150 Vienna Road Telex: W G 347
Tillsonburg, Ontario N4G 4J1 TECNOLUBE SEAL SNC Dl LODI Phone: 439794
LUCIANO C. Telex: 25011 INDIN PK Cable: FERNTHOM
Phone:(519)842-7351
Via Dante 38, 37029 S. Pietro in
Cariano
>^EPErv/^_

CORPORATE HEADQUARTERS: LAFAYETTTE. LA 70505 / P o BOX 51371; (318) 232-2496 / TELEX 586650 / CABLE CODE- OILCERE
DISTRICT OFFICES:
HOUSTON. TX. 77213 / P. O BOX 96064 / (713) 452-7445 CORPUS CHRISTI, TX. 78408 / P O 80X4883/(512)855-1650
MIDLAND. TX 79703 / P O BOX 7112 / (915) 682-6918 SHREVEPORT. LA / (318) 226-8739
EL RENO, OK. 73036 / P. 0 BOX 1122 / (405) 262-7031

Pipe Coating

Uploaded by

Copyright:

Available Formats

Pipe Coating

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Pipe Coating

Uploaded by

Copyright:

Available Formats

Jfl?

OIL CENTER RESEARCH, INC. 1,986/83* Product?

LIQUID-O-RING THREAD SEALANTS are superior

Residual Lubrication, E. P. Lubricant,

Eight Grades For Most Service Conditions

2 OIL CENTER RESEARCH, INC.

PREMIUM API MODIFIED 315

TYPICAL OBSERVATIONS API MODIFIED 300 LIQUID-O-RING 115 PURE GRAPHITE

OIL CENTER RESEARCH, INC. 3

PIPE STORAGE COMPOUNDS

LIQUID-O-RING 125 SELF HEALING

4 OIL CENTER RESEARCH, INC.

LIQUID-O-RING116 PIPE DOPE

An economical multi-use lubricating compound,

EXTREME TEMPERATURES COMPOUNDS

LIQUID-O-RING HT-1800 LIQUID-O-RING HT-2000

as 1800°F (982°C). It can be

and salt water, is non-corrosive and will not separate,

OIL CENTER RESEARCH, INC. 5

THREAD LOCKING COMPOUND

LIQUI-LOK 250 LIQUI-LOK is a thread locking compound used for lock-

A one pound kit of LIQUI-LOK

TOOL JOINT AND DRILL COLLAR COMPOUNDS

ZN-40, ZN-50 and ZN-60 Approved by tool joint manufacturers, LIQUID-O-RING

ZN-50 HT and ZN-50 ET

regardless of temperature, pressure and extended peri-

COPPER SEAL should be used in areas subjected to

COPPER SEAL is manufactured to exacting specifica-

TYPICAL OBSERVATIONS/LIQUID-O-RING 20/20

DRILL PIPE COMPOUND 212

OIL CENTER RESEARCH, INC. 9

Under the tradename PROTEKTO-COAT, Oil Center

for tubing and casing. Similar to 914, it contains cor-

Black External Coating

Amber, Semi-Clear External Coating

PROTEKTO-COAT TYPICAL OBSERVATIONS

'EXTERNAL PIPE COATING COVERAGE GUIDE

12 OIL CENTER RESEARCH, INC.

GREASE SEAL 765

No. 770 16 4,500- 5,500

No. 774 20 15,000-16,500

LIQUID-O-RING WIRELINE LUBRICANTS and SEAL-

OIL CENTER RESEARCH, INC. 13

PUMP AND VALVE PACKINGS

LIQUID-O-RING SELF-MOLD 636

SELF-MOLD in whole stick form or break in small pieces

SELF-MOLD services temperatures to 600°F(315°C),

14 OIL CENTER RESEARCH, INC.

VALVE LUBRICANTS & SEALANTS

LIQUID-O-RING 61 VALVE KLEAN LIQUID-O-RING 602/2 VALVE SEAL

ing, leak resistant and economical to use. VALVE LIFE

——— 5> I iu* at£.ea HINU rH^ivMuiwva ueounir i lurxa —

108 STICKS/BOX 72 STICKS/BOX 32 STICKS/BOX 28 STICKS/BOX 14 STICKS/BOX 12 STICKS/BOX 12 STICKS/BOX

Recommended as both a lubricant and sealant for plug

PREMIUM LUBRICANTS & SEALANTS

OIL CENTER RESEARCH, INC. 17

BEARING COMPOUND 101 COMPOUND protects against corrosion and damage

TYPICAL OBSERVATIONS LIQUID-O-RING GREASES

NLGI GRADE 2 2 11/2 2 2 1VS 2 2 2