FACTORY AUTOMATION

MITSUBISHI CNC
Software Tools
 CNC Software Tools

Development Tools User Support Tools

Design Setup Training Operational Support

NC Servo Selection P3 NC Configurator2 P6 NC Trainer2 P8 NC Explorer P9
(NC Parameter Setup) (Training Tool) (Data Transfer)
NC Designer2 P4
(Screen Design) NC Analyzer2 P7 NC Trainer2 plus P8 NC Monitor2 P10
NC Trainer2 plus P5 (Servo Adjustment) (Training Tool) (Remote Monitoring)
(Customization Support)

MITSUBISHI

Products
CNC The Best Partner for Your Success
Some of the items in this catalog are under development, therefore the software and CNC display are subject to change without notice.

Trademarks
MELSOFT is a trademark or a registered trademark of MITSUBISHI ELECTRIC Corporation in Japan and/or other countries.
Ethernet is a registered trademark of Xerox Corporation in the United States and/or other countries.
Microsoft ® and Windows ® are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.

1 2
 D evelopment T ools D evelopment T ools
Design Design

NC Servo Selection NC Designer2 (Screen Design)

Charge-free
M800 M80 M700V M70V E80 E70

Of the various types of servo motors, What helps to create an original screen
which one is the best for my machine? to differentiate the machine?

Find it with NC Servo Selection! Easy to make with NC Designer2!

Set the machine constants according Combine the parts to
to the following explanation. customize the screen
Easy to make a trend graph
Calculation results of the spindle without programming.
acceleration/deceleration times

Servo motor selection

(Note) The trend graph is the control dedicated to
M800/M80/E80 series.
We provide a developmental environment Main functions
The spindle acceleration/deceleration ● Registration of screen created in CNC menu
where the MTB can customize screens
times are shown in a graph. Screen created with NC Designer2 can be registered in the main
easily.
operation, setup and editing menus.
Two types of screen development
● Easy to create custom screens with template function and macro function
Input the machine constants for selection of Main functions
methods are available; the interpreter Screens can be created easily by using MITSUBISHI standard
the optimum servo motor. ● Servo motor capacity selection
● Spindle acceleration/deceleration time calculation
system (programming without C++) for screen templates.
This function automatically calculates spindle simple screen development, and the Various original processes can be added easily by using macro
● Power supply unit selection
acceleration/deceleration times and selects ● Power supply facility capacity calculation compiler system (programming with language instead of C language.
the optimum power supply unit. ● Multi-axis drive unit combination function
C++) with a complex controller. ●C Language Library strongly supports in screen development
● Saves selected data Besides drawing, this function strongly supports event controls
such as mouse and key operations and the window function
indispensable for creating GUI such as window system, etc.

NC Servo Selection Main specifications NC Designer2 Main specifications

Windows 7 SP1 or later/Windows 8.1/Windows 10
® ® ®
Windows ® 7 SP1 or later/Windows ® 8.1/Windows ® 10
OS supported OS supported
* Supports 32-and 64-bit OS (WOW64 available for 64-bit) * Supports 32-and 64-bit OS (WOW64 available for 64-bit)
Languages English/Japanese Languages English/Japanese
English/Japanese/German/Italian/French/Spanish/
Languages supported
Simplified Chinese/Traditional Chinese/Korean/Portuguese/Hungarian/
for original screen
Dutch/Swedish/Turkish/Russian/Czech/Polish
CNCs supported M800/M80/E80/M700V/M70V/E70 Series

3 4
 D evelopment T ools D evelopment T ools
Design Setup

NC Trainer2 plus (Customization Support) NC Configurator2 (NC Parameter Setup) Free version is
limited in
M800 M80 M700V M70V E70 M800 M80 M700V M70V E70 C80 C70 function

How can I check the operation of customized screens or It is hard to setup each parameter
PLC programs, etc. be conducted on my computer? using the manual…

Debugging is easy with NC Trainer2 plus! Easy setup using NC Configurator2!

Check the contents of the
Edit PLC program with PLC Customize a screen using NC Designer2 and
parameters in the help section.
development tool of NC Trainer2 plus. check its operation using NC Trainer2 plus.

Check and setup the

parameter list using a computer.

NC Trainer2 plus NC Designer2 NC Trainer2 plus

NC Configurator2

NC Trainer2 plus supports customization Main functions NC parameters required for NC Main functions
development; it helps to program the ladder ● Development support for customized screens. control and machine operation ● NC parameter setting/search The following are included the
(Even if there is no NC device, it can be debugged ● Help (parameter explanation) full-mounted version.
programming of the user PLC to be developed by can be edited on a computer.
using a computer.) ● Offline comparison of parameter
● Parameter initial setting wizard
machine tool builders and debug it and check ● Development support for user PLC (ladder)
Initial parameters can also be input/output ● Function parameters
the operations of customized screens. ● Provides machine operating environment easily created by inputting the ● NC data input

(customized machine operation panel) that meets machine configuration. ● Printing

the specifications of the user's machine tool.

NC Trainer2 plus Main specifications NC Configurator2 Main specifications

Windows 7 SP1 or later/Windows 8.1/Windows 10
® ® ®
Windows ® 7 SP1 or later/Windows ® 8.1/Windows ® 10
OS supported OS supported
* Supports 32-and 64-bit OS (WOW64 available for 64-bit) * Supports 32-and 64-bit OS (WOW64 available for 64-bit)
Languages English/Japanese/Simplified Chinese/Traditional Chinese Languages English/Japanese/Simplified Chinese
CNCs supported M800(equivalent to M830)/M80/M700V(equivalent to M730V)/M70V/E70 Series CNCs supported : M800/M80/M700V/M70V/E70/C80/C70 Series
CPU: 2.66GHz or higher and processor with 2 or more cores Connection configuration : Ethernet/RS-232C(parameter read/write in serial communication)/
CNC connections
Operational Memory: 2GB or more USB (C70 Series only)
environment
Available hard disk space: 400MB or more (excluding the free space necessary for running the OS) Connectable CNCs : 8 (max.)
Display resolution : FHD (1920×1080) or higher Precaution Free version has limited in functions.

5 6
 D evelopment T ools U ser Suppor t T ools
Setup Training

NC Analyzer2 (Servo Adjustment) NC Trainer2/NC Trainer2 plus (Training Tool)

M800 M80 M700V M70V E70 C80 C70 M800 M80 M700V M70V E70

Servo parameter adjustment How can I train myself in CNC operation

I don't have a tool for measuring
sounds complicated… without access to the machine?
the machine's characteristics on hand...

Easy adjustment and measurement Hone operating skills with

with NC Analyzer2! NC Trainer2/NC Trainer2 plus!
Education
Servo parameters are Results displayed in bode diagram
adjusted automatically

Adjusting with simple

parameter settings

Operation check
Results

● Put skills obtained

into practice
● Smooth start-up
● Quick setup/machining

This is an application for operating the CNC screen and Main functions
NC Analyzer2 helps the servo parameter Main functions machining programs on a computer without the CNC control ● Create projects that reproduce
settings by measuring and analyzing the Adjustment wizard Graph a variety of machining environments.
● ●
unit or a special display unit.
● Not only the NC screen, but also the
Speed loop gain adjustment Bode diagram
machine's characteristics. It can also be used for learning CNC operation and checking
Notch filter setting measurement display NC keyboard and the operation
Measurement and analysis can be done Circularity adjustment Servo waveform machining programs. The machining programs created on NC panel are displayed on the computer.
by running a servo motor using the Display adjustment measurement Trainer2/NC Trainer2 plus can be used on actual CNCs.
machining program for adjustment, or progress Display waveforms
before/after adjustments
using the vibration signal.
● Project management NC Trainer2/NC Trainer2 plus Main specifications
This function can sample various types Measured waveforms batch Windows ® 7 SP1 or later/Windows ® 8.1/Windows ® 10
of data. management OS supported
* Supports 32-and 64-bit OS (WOW64 available for 64-bit)
Languages English/Japanese/Simplified Chinese/Traditional Chinese
NC Analyzer2 Main specifications CNCs supported M800(equivalent to M830)/M80/M700V(equivalent to M730V)/M70V/E70 Series
Windows ® 7 SP1 or later/Windows ® 8.1/Windows ® 10 CPU: 2.66GHz or higher and processor with 2 or more cores
OS supported
* Supports 32-and 64-bit OS (WOW64 available for 64-bit) Operational
environment
Memory: 2GB or more
Languages English/Japanese/Simplified Chinese/Korean Available hard disk space: 400MB or more (excluding the free space necessary for running the OS)
CNCs supported : M800/M80/M700V/M70V/E70/C80/C70 Series Display resolution : FHD (1920×1080) or higher
CNC connections
Connection configuration : Ethernet Before executing machining programs on an actual CNC, sufficient review should
Precaution
be conducted to prevent interference or any other errors.

7 8
 U ser Suppor t T ools U ser Suppor t T ools
Operational Support Operational Support

NC Explorer (Data Transfer) NC Monitor2 (Remote Monitoring)

Charge-free
M800 M80 M700V M70V E70 C80 M800 M80 M700V M70V E70 C80

How can I transfer data prepared How can I monitor a CNC on a computer in the office
on a computer to a CNC? without visiting the factory?

Easy data transfer using NC Explorer! Easy monitoring with NC Monitor2!

Drag and drop to transfer machining data files Monitor the status of multiple CNCs on one computer
Machining
data file

NC Explorer
Ethernet Ethernet
Machining data file

NC Explorer NC Monitor2

Taking advantage of the Main functions

network in a plant, CNC ● Adopts the same screen structure
CNC machining data file can be operated Main functions
The monitoring display is constructed to mirror the CNC display unit is.
using Windows® Explorer on a computer ● Cooperation with Windows® Explorer operation status can be
Note that the screen structure of 10.4-type display is applied when 15-type or
when the computer is connected with
Operational CNCs are displayed as folders on Windows® monitored from remote 19-type display is connected.
Explorer. locations. Possible to select a monitoring screen that is not synchronized with display of
multiple CNCs via Ethernet. Drag and drop to transfer the files.
Several CNCs can be the CNC in operation.

connected and monitored ● Limit display/setting operation of CNCs

simultaneously. By setting parameters in a CNC, the availability of displaying and setting
using this software can be restricted.
● Connectable CNCs are automatically listed
NC Explorer Main specifications Connectable CNCs in a network group are automatically displayed in a list,
and the CNCs can be connected by selecting them.
Windows ® 7 SP1 or later/Windows ® 8.1/Windows ® 10
OS supported
* Supports 32-and 64-bit OS (WOW64 available for 64-bit) NC Monitor2 Main specifications
CNCs supported : M800/M80/M700V/M70V/E70/C80 Series
CNC connections Windows ® 7 SP1 or later/Windows ® 8.1/Windows ® 10
Connection configuration : Ethernet OS supported
* Supports 32-and 64-bit OS (WOW64 available for 64-bit)
Languages English/Japanese
CNCs supported : M800/M80/M700V/M70V/E70/C80 Series
CNC connections Connection configuration : Ethernet
Connectable CNCs : 10 (max.)
Precaution Please use the Remote Monitor Tool for the C70.

9 10
 CNC Software Tools

Global Partner. Local Friend.

BNP-A1224-F / ENG
CNC Software Tools
[YouTube] [YouTube logo] is a trademark or registered trademark of Google Inc.

HEAD OFFICE: TOKYO BLDG., 2-7-3 MARUNOUCHI,

CHIYODA-KU, TOKYO 100-8310, JAPAN

K-KL2-5-C0153-E NA1810 Printed in Japan〈IP〉 Printed Oct. 2018 All trademarks acknowledged.