Scribd
Upload
7K views

Windows Networking Commands

Uploaded by

Sulltana Shaqiri
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
7K views

Windows Networking Commands

Uploaded by

Sulltana Shaqiri
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Windows Networking Commands

The fault-monitoring system should assist in isolating and diagnosing the fault. Examples
of tests that a fault-monitoring system should have at its command include a
• connectivity test
• data integrity test
• protocol integrity test
• data saturation test
• connection saturation test
• response-time test
• loopback test
• function test

• diagnostic test

Windows has some very useful networking utilities that are accessed
from a command line (cmd console).

On Windows 10 type cmd in the search box to open a command console.

The networking commands are mainly used for getting system information and troubleshooting
networking problems.

Here we look at the 10 commands that I use most often.

1. Ping Command
The ping command is one of the most often used networking utilities for detecting devices on a
network and for troubleshooting network problems.

When you ping a device you send that device a short message, which it then sends back (the
echo).

The general format is ping hostname or ping IPaddress.

Example

ping www.google.com or ping 216.58.208.68

This article covers the ping command in more detail

2. ipconfig Command

Another indispensable and frequently used utility that is used for finding network information
about your local machine like IP addresses, DNS addresses etc

Basic Use: Finding Your IP Address and Default Gateway

Type the command ipconfig at the prompt.

The following is displayed

Ip config has a number of switches the most common are:

ipconfig /all – displays more information about the network setup on your systems including the
MAC address.

ipconfig /release – release the current IP address

ipconfig /renew – renew IP address

ipconfig /? -shows help

ipconfig/flushdns – flush the dns cache


3. Hostname Command

A very simple command that displays the host name of your machine. This is much quicker than
going to the control panel>system route.

4. getmac Command

Another very simple command that shows the MAC address of your network interfaces

5. arp Command

This is used for showing the address resolution cache. This command must be used with a
command line switch arp -a is the most common.

Type arp at the command line to see all available options.

See using arp in the basic networking course

6. NSlookup

Used for checking DNS record entries. See Using NSlookup for more details

7. Nbtstat

Diagnostic tool for troubleshooting netBIOS problems. See This technet article.

8 Net Command
Used for managing users,service,shares etc see here

9. Netstat Command

Used for displaying information about tcp and udp connections and ports. See tcp and udp ports
and sockets and how to use the netstat command

10. TaskKill Command

View a list of running tasks using the tasklist command and kill them by name or processor ID
using the taskKill command- See this tutorial.

You might also like