Scribd
Upload
77 views24 pages

Basic TCU Training

The document provides instructions for basic TCU training, including changing network settings to connect to the TCU, installing necessary software, connecting hardware, transferring TCU software and scripts, upgrading the TCU software, and performing some maintenance commands. The training covers connecting to the TCU via LMT port, creating a folder to store TCU files, using freeFTPd to transfer files, upgrading the TCU using TeraTerm, and checking for alarms after completion.

Uploaded by

hassan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
77 views24 pages

Basic TCU Training

The document provides instructions for basic TCU training, including changing network settings to connect to the TCU, installing necessary software, connecting hardware, transferring TCU software and scripts, upgrading the TCU software, and performing some maintenance commands. The training covers connecting to the TCU via LMT port, creating a folder to store TCU files, using freeFTPd to transfer files, upgrading the TCU using TeraTerm, and checking for alarms after completion.

Uploaded by

hassan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 24

Basic TCU Training

Najaf OFFICE / CII

Eng. Hussein Muwafaq


CHANGE IP ADDRESS IN YOUR
LAPTOP TO :
IP Address (192.168.1.2).
Subnet mask (255.255.255.0)
Default gateway (192.168.1.1).
SOFTWARE NEED :-

1- freeFTPd program for TCU SW transfer .

2-Tera-term or putty for configure TCU .

3-You need site Script and TCU


SW files .
HARDWARE WORK :-

Power cable

E1 cable from DUG

LAN Cable from NPU


TO TND
Connect to TCU through LMT port in TCU
Create new folder in “C” name it “TCU” and
put TCU SW and SCRIPT INSIDE IT.
TCU SW and SCRIPT
Open freeftpd program and perform the following
steps as print screens .
Then select home directory :-
Then select SFTP root directory from “C”
Now SFTP server is running .
Now open TCU SW upgrade procedure

Select item and past it in Tera Term

TCU will restart after


this comment
copy site script name and past it in TCU SW
upgrade procedure
This comment according to site script name :
Let “free FTPd program running and open Tera –term
and change IP and service as shown in print.
Tera- term login
Tera- term login
Tera- term login
After COMPLETE COMMANDS , PING TO (PGW) IP
• Call to B.O BSS for halt site
• NOW connect to OMT and change transmission
parameters as attached print .

Note :- if you have two


DUG you should make
new IDB to change
transmission parameters
in both .
• If site not have 3G , there is alarms will show in TCU
and will remove this alarms by comments :
Some commands for TCU
maintenance :

- “getalarmlist” to check TCU alarms .


-”traceroute 10.39.4.3” will show you IP route .
-”restart” to restart TCU .
-”collectDCGInformation” to collect TCU log and go to file
and save log
.
Note 1:-if you want to stop Ping press CTRL+C .
Note 2 :- you can past command to tera term by pressing
Right click .
THANK YOU

You might also like