ADC Fiber Protection System Catalog

FiberGuide® Fiber Management Systems
3rd Edition
Table of Contents
Introduction
Introduction.................................................................................................................................................... 1
A Variety of Solutions...................................................................................................................................... 2
Innovative Products......................................................................................................................................... 3
Features and Benefits...................................................................................................................................... 4
Applications
Combining System Parts.................................................................................................................................. 5
Downspout Drop Options................................................................................................................................ 6
Express Exit™ Drop Options.............................................................................................................................. 7
Trumpet Flare Options..................................................................................................................................... 8
4x24-Inch Island T........................................................................................................................................... 9
FiberGuide® Systems
Raceway Reconfigurations............................................................................................................................. 10
Supporting Overhead Systems....................................................................................................................... 12
Patch Cord Densities

Recommended and Maximum Patch Cord Densities...................................................................................... 16
Things to Consider When Ordering............................................................................................................... 17
2x2 System
Fittings – 2" H x 2" W................................................................................................................................... 20
Downspouts and Attachments – 2" H x 2" W............................................................................................... 21
Straight Section and Junction – 2" H x 2" W................................................................................................. 22
Part Drawings............................................................................................................................................... 23
2x6 System
Fittings, Downspouts and Attachments – 2" H x 6" W.................................................................................. 26
Table of Contents
Low-Profile Express Exit™............................................................................................................................... 26
Straight Section – 2" H x 6" W..................................................................................................................... 28
Junction – 2" H x 6" W................................................................................................................................. 28
Part Drawings............................................................................................................................................... 29
4x4 System
Fittings – 4" H x 4" W................................................................................................................................... 32
104892AE
Snap-Fit™ Junction – 4" H x 4" W................................................................................................................. 36

Part Drawings............................................................................................................................................... 37
4x6 System
Fittings – 4" H x 6" W................................................................................................................................... 42
Snap-Fit™ Junction – 4" H x 6" W................................................................................................................. 46
Part Drawings............................................................................................................................................... 47
•
4x12 System
Fittings – 4" H x 12" W................................................................................................................................. 50
10/10
Downspouts and Attachments – 4" H x 12" W............................................................................................. 52

Straight Section – 4" H x 12" W................................................................................................................... 54
Snap-Fit™ Junction – 4" H x 12" W............................................................................................................... 55
Part Drawings............................................................................................................................................... 56
4x24 System
Fittings – 4" H x 24" W................................................................................................................................. 60
Downspouts – 4" H x 24" W........................................................................................................................ 61
Straight Section............................................................................................................................................. 62
Snap-Fit Junction........................................................................................................................................... 62
Cover Kits..................................................................................................................................................... 62
Part Drawings............................................................................................................................................... 63
www.adc.com • +1-952-938-8080 • 1-800-366-3891 iii

Table of Contents
Express Exit™ Family

For 4x4, 4x6, 4x12, and 4x24 Systems........................................................................................................... 66
2-Inch Express Exit™ . .................................................................................................................................... 67
Part Drawings............................................................................................................................................... 68
Vertical Fiber Management Systems

2" and 4" Solid and Slotted Duct Kits and Components................................................................................ 70
2"x 2" Accessories........................................................................................................................................ 72
4"x 4" and 4"x 2" Accessories..................................................................................................................... 73
RiserGuide
Introduction.................................................................................................................................................. 76
Specifications................................................................................................................................................ 77
Installation and Removal............................................................................................................................... 78
Ordering Information.................................................................................................................................... 79
2x2 System Support Kits

Direct Support Kits........................................................................................................................................ 82
Aluminum Track Support Kit.......................................................................................................................... 83
Support Kit Drawings.................................................................................................................................... 84
2x6, 4x4, 4x6 System Support Kits

Support Kit................................................................................................................................................... 86

Support Kit................................................................................................................................................... 90
Table of Contents
4x24 System Support Kits.............................................................................................................................. 94
Support Kit Accessories.................................................................................................................................. 96
System Accessories......................................................................................................................................... 97
Ordering Information.................................................................................................................................... 98
Index................................................................................................................................................................ 99
104892AE
•
10/10
www.adc.com • +1-952-938-8080 • 1-800-366-3891 iv

FiberGuide® Fiber Management System
Introduction
The Industry's Most Comprehensive Optical Raceway System

ADC's FiberGuide® fiber management systems offer the greatest breadth of optical raceway products in
the industry. In response to customer requirements, ADC continues to innovate and improve FiberGuide
systems, adding greater flexibility and driving down installation time to ensure a smooth deployment.
FiberGuide is a raceway system designed to protect and route fiber optic patch cords, multi-fiber cable
Introduction
assemblies and intrafacility fiber cable (IFC) to and from fiber splice enclosures, fiber distribution frames
and fiber optic terminal devices. FiberGuide ensures a two-inch minimum bend radius is maintained
throughout the system. Tool-less, Snap-Fit™ junctions and cover options significantly reduce the amount
of time required for installation.
The FiberGuide system is a complete set of products designed and

manufactured to ensure total off-frame protection and ease of use.
Basic components include horizontal and vertical straight sections,
horizontal and vertical elbows, downspouts, junctions and numerous
support hardware and flex-tube kits.
Available in a variety of sizes:
2x2 – Ideal for smaller installations or for vertical routing of a maximum
of four hundred 2 mm fiber optic patch cords. All 2x2 FiberGuide
products are shipped with covers.
2x6 – Designed for height restricted environments, this robust

system provides the same support and system flexibility of the traditional
4-inch-high system while saving 2 inches of overhead space. It features
a maximum capacity of 1,200, 2 mm patch cords.
4x4 – Features the maximum capacity to support 1,600, 2 mm patch

104892AE
cords. It has been engineered to allow straight sections to be

self-supporting over a span of up to 1.83 m (6 feet).
4x6 – Features the same benefits of the 4-inch system and a maximum
trough capacity of 2,400, 2 mm patch cords.
•
10/10
4x12 – The 12-inch-wide trough has a maximum capacity to support

nearly 5,000, 2 mm patch cords. Perfect for runs over fiber frame
lineups and perimeter routes.
4x24 – The 4x24-inch system is the ultimate raceway solution to

securely route and protect patch cords over high-density optical
distribution frames including ADC's Next Generation Frame (NGF) and
Next Generation 3 Frame (NG3®). Designed for maximum capacity, this
robust system provides the same support and flexibility as the traditional
4x12-inch system while doubling capacity.
See page 16 for patch cord density tables.
www.adc.com • +1-952-938-8080 • 1-800-366-3891 1

Introduction - A Variety of Solutions
Examples of FiberGuide® Integration
FL2000 FiberGuide® FiberGuide®

Panel Flex Tubing Express Exit™ FPL Panel
Intermediate FDF Solutions
Introduction
(8" FCM)
FL1000
Wall Box RiserGuide Vertical
FiberGuide®
Fiber Raceway Solutions
(FGS) 6" 6"
6" 6"
FMT Panel
6" 6"
12" 12"
Traditional Fiber Optic
ODF Lineup 24" Transport Lineup
Solutions Fiber Optic
(8" FCM, LSX) 12" Panel Solutions
(FOP)
High-Density
ODF Lineup
Solutions
(NGF, NG3®)
Fiber Cable Assembly
& Connector Solutions
(FCC)
Value-Added Module
Cable Entrance (VAM) Solutions
Solutions (Monitors, Splitters, WDM, CWDM)
(FEC) Splice Vault
104892AE
FiberGuide® Materials Product Statement

The FiberGuide fiber management system is a UL-listed (E151158) general purpose fiber optic raceway
system. All FiberGuide products are manufactured from flame-retardant materials. No FiberGuide system
parts contain PVC. The table summarizes the fire-resistant properties of FiberGuide straight sections,
molded parts and flex tube.
Raw Material Meets Finished Product Meets

•
UL Requirement UL Requirement
10/10
FiberGuide Straight Sections Flame rated: UL94V-0 UL94V-0 and UL2024

(All FiberGuide Systems)
FiberGuide Molded Fittings Flame rated: UL94V-0 UL94V-0 and UL2024

(All FiberGuide Systems)
FiberGuide Flex Tube (2") Flame rated: UL94V-0 UL2024
FiberGuide Flex Tube (1") Flame rated: UL94V-0 UL2024
FiberGuide Flex Tube (7/8") Flame rated: UL94V-2 UL2024
Note: FiberGuide flex tube complies with the National Electrical Code (NEC) Article 770-51 and Underwriters
Laboratory UL2024 requirements for General Purpose Fiber Optic Raceways.
www.adc.com • +1-952-938-8080 • 1-800-366-3891 2

Introduction - Innovative Products
ADC continues to add innovative products to FiberGuide®

fiber management systems to ensure they remain the most
comprehensive solutions for all optical raceway requirements and
applications. These products increase functionality and flexibility
and are compatible with existing raceway components.
Introduction
Snap-Fit™ and Hinged Cover Options
To drive down valuable installation time, ADC provides tool-less
Snap-Fit™ and hinged cover options. Featuring simple, durable
molded hardware, these covers install in minutes and require no
Hinged Cover System

tools. The hinged cover option provides easy access, enabling
installers and technicians to deploy the product quickly and easily.
In addition, the covers do not need to be fully opened
for maintenance.
Snap-Fit Junction
ADC's Snap-Fit Junction is the industry's first and only completely
tool-less junction. No additional tools are needed for installation
or removal. Quick and easy to install, the FiberGuide Snap-Fit
Junction saves valuable time and money.
Express Exits™ Express Exit™ Family

ADC features a number of innovative Express Exit™ options:
Low profile, 2-inch and 4-inch options round out this innovative
product line, designed to meet your most demanding network
requirements. By simply securing an Express Exit to the sidewall
of a FiberGuide straight section, jumpers can be permanently or
temporarily routed to the fiber optic terminal (FOT) equipment
or fiber frames. No cutting is required. Positioning a drop with a
member of the Express Exit family greatly simplifies installation,
104892AE
protects the integrity of existing fibers and increases the overall

flexibility of the raceway system.
Raceway Reconfiguration Solutions

ADC offers two products to facilitate easy on-site raceway Cut-in T
reconfigurations. Available for the 4x4, 4x6, 4x12 and 4x24*
systems, the cut-in "T" and the expandable straight section
offer the required flexibility to optimize raceway systems in retrofit
applications without jeopardizing the integrity of existing cables.
•
10/10
*Expandable straight section not available for 4x24 system.
www.adc.com • +1-952-938-8080 • 1-800-366-3891 3

Introduction - Features and Benefits
Introduction
Features and Benefits
Speed of Installation
FiberGuide® systems feature a variety of products that allow for quick and easy installation. Express Exit™
drops as well as tool-less products including Snap-Fit™ junctions, snap-on covers and new hinged cover
options save valuable time for installers.
Speed of Deployment
The Express Exit system enables new drops to be added or removed quickly and easily. A drop can be added
into a fully loaded raceway in seconds—without cutting.
Raceway Flexibility
FiberGuide features 38 support structures, over 75 fittings, multiple drop options and several other
components to suit any application you create.
104892AE
Fiber Protection
ADC's broadband expertise translates into maximum protection for your network. Two-inch minimum bend
radius is maintained throughout the system regardless of the raceway size.
Strength and Durability
100% raceway reliability—stands up to any challenge.
•
10/10
www.adc.com • +1-952-938-8080 • 1-800-366-3891 4

Applications - Combining System Parts
A combination of components from the various sized raceway systems typically comprise overhead
FiberGuide® systems. Adapters are used to make the transition between sizes. An example of an
overhead system that combines many of ADC's FiberGuide systems can be seen below.
4x12 90° Horizontal Elbow 4x12 Horizontal T with single 6" Exit 4x24 Horizontal Cross
FGS-MH9E-F FGS-MHRT-F/B FGS-MHXP-H
4" Express Exit 4x24 Straight Section
4x12 to 4x24 Adapter
FGS-MEXP-E-A/B/F FGS-MSHS-H
FGS-MDSA-H/F
4x12 Horizontal T
FGS-MHRT-F
4x12 Straight Section 4x24 Island T with Single 12" Exit
Applications
FGS-MSHS-F FGS-MHRT-H/F
4x24 45° Up Elbow

Express Exit FGS-MU4E-H
FGS-MEXP-A/B/F 4x12 to Dual 4x6 Adapter
4x6 45° Down Elbow FGS-MDSA-F2B
FGS-MD4E-B 4x6 Straight Section
FGS-MSHS-B
4x12 45° 4x6 45° Up Elbow with Cover 4x6 Horizontal Cross
Down Elbow FGS-MU4E-B FGS-MHXP-B
FGS-MD4E-F Low Profile Express Exit 4x4 Cut in T for 4x24 FiberGuide
Trumpet Flare FGS-MEXP-LP-A/B/F FGS-MHIS-A/H
FGS-MTRM-F 4x4 90° Horizontal Elbow
4x6 90° Down Elbow 4x6 45° Horizontal Elbow
FGS-MH9E-A
FGS-MD9E-B FGS-MH4E-B
4x6 Straight Section
4x6 to 4x6 Adapter FGS-MSHS-A
Trumpet Flare FGS-MH4E-B
4x12 Horizontal
FGS-MTRM-G
Cross with two 4x6 90° Up Elbow 2x2 to 4x4 Adapter
6" Exits with cover FGS-MDSA-AC
FGS-MHXP-B/F FGS-MU9E-B 2x2 Horizontal
2x2 90° Extended Straight Section
Horizontal Elbow FGS-MSHA-A
FGS-MH9A-C-45/2
or
2x2 90° Horizontal Elbow
FGS-MH9A-C
104892AE
•
10/10
www.adc.com • +1-952-938-8080 • 1-800-366-3891 5

Applications - Downspout Drop Options
A downspout drop is recommended over optical distribution frame lineups. The rigid 2-inch drop
option and 2-inch flex tube option are two methods for directing fibers out of overhead FiberGuide®
downspouts and into optical equipment bays. The rigid system is recommended because it offers
excellent bend radius control and ensures a quality fiber backbone installation.
4x6 Straight Section 4x6 Downspout 4x6 End Cap Kit 4x6 Straight Section 4x6 Downspout 4x6 Snap-Fit Junction
FGS-MSHS-B FGS-MDSP-B FGS-HMEC-B FGS-MSHS-B FGS-MDSP-B FGS-MFAW-B
4x4/4x6
Downspout Insert 4x6 End Cap Kit
FGS-HDSI-AB FGS-HMEC-B
4x6 Snap-Fit Junction
FGS-MFAW-B
Applications
4x6 Downspout Cover

2x2 45°
FGS-MCDS-AB
Down Elbow
2x2 Junction Kit FGS-MD4A-C*
FGS-MJWR-C 4x4 End Cap with one
2" Flex Tube, 5' long
FGS-KT03-A1
2x2 45° Up Elbow
FGS-MU4A-C*
*Shown without cover

2x2 Vertical 2x2 Vertical
Slotted Duct Kit Slotted Duct Kit
FGS-KTW1-C* FGS-KTW1-C
104892AE
•
2x2 Rigid Drop Option 2" Flex Tube Drop Option

10/10
www.adc.com • +1-952-938-8080 • 1-800-366-3891 6

Applications - Express Exit™ Drop Options
An Express Exit is recommended over active equipment racks or cabinets. The rigid 2-inch drop
option and 2-inch flex tube option are two methods for directing fibers out of overhead FiberGuide®
downspouts and into optical equipment bays. The rigid system is recommended because it offers
excellent bend radius control and ensures a quality fiber backbone installation.
Express Exit 2x2 4x6 Straight Section Express Exit 2x2

FGS-MEXP-A/B/F* FGS-MSHS-B FGS-MEXP-A/B/F*
4x6 Straight Section 2x2 45° Down Elbow

FGS-MSHS-B FGS-MD4A-C
Applications
2x2 Junction Kit (4) 2" Flex Tube Attachment

FGS-MJWR-C with 5' of Flex Tube
FGS-MEX1-C-5F
2x2 Horizontal Solid
Straight Section 2x2 Vertical
FGS-MSHA-C* Slotted Duct Kit
FGS-KTW1-C
* Shown without Cover 2x2 Vertical * Shown without Cover

Slotted Duct Kit
FGS-KTW1-C*
104892AE
2x2 Rigid Drop Option 2" Flex Tube Drop Option

•
10/10
www.adc.com • +1-952-938-8080 • 1-800-366-3891 7

Applications - Trumpet Flare Options
The trumpet flare is recommended at the bottom of a downspout when directing fibers into a fiber
distribution bay. Trumpet flares provide bend radius protection and allow for a large number of fiber
patch cords to transition into a fiber bay. A 4x4 trumpet flare is used for the 4x4 and 4x6 downspouts
and a 4x6 trumpet flare is used for the 4x12 downspout.
4x12 Horizontal T 4x12 Horizontal

with single 6" Exit Straight Section 4x6 Downspout
FGS-MHRT-F/B FGS-MSHS-F FGS-MDSP-B
4x12 Snap-Fit 4x6 Straight

Junction (2) Section 4x6 Snap-Fit Junction (2)
Applications
FGS-MFAW-F FGS-MSHS-B FGS-MFAW-B

4x4 Trumpet Flare Kit

4x6 Trumpet Flare Kit New Threaded FGS-MTRM-A
FGS-MTRM-B Rod Bracket Kit
FGS-HNTR-F-5/8
104892AE
Horizontal T and Trumpet Flare Downspout with Trumpet Flare
When attaching a straight section or fitting to the exit of a 4x4 or 4x6 downspout, the FGS-MJWR-A
junction must be used. This junction is only required to connect the vertical part, the FGS-MFAW-X
junction can be used to connect the horizontal parts.
•
FGS-MFAW-X
10/10
FGS-MJWR-A
Shown Assembled Exploded View
www.adc.com • +1-952-938-8080 • 1-800-366-3891 8

Applications - 4x24-Inch Island T
The 4x24 Island T with 12-inch exit is designed to be used over the NGF, NG3® or any high-density fiber
frame. The 4x24 Island T, a horizontal T with spool and factory-installed trumpet flare, channels fiber
directly into the vertical cableways below.
Applications
4x24 Island T
(Shown with support brackets over an NGF frame.)
104892AE
•
10/10
www.adc.com • +1-952-938-8080 • 1-800-366-3891 9

Applications - Raceway Reconfigurations
Cut-in T, Fitting and Fixture

ADC's innovative cut-in T fitting and fixture enable on-site raceway modifications without jeopardizing
the integrity of installed fibers. Available in 4-, 6-, and 12-inch widths, the cut-in T fitting can be
retrofitted to any installed 4-, 6-, 12-, and 24-inch straight section using the cut-in T fixture and the
hardware supplied with the fitting. No special tools are required.
Applications
Fixture attached to sidewall of raceway Fixture protects cables during cutting of sidewall
104892AE
Fitting fills gap left by removed sidewall Supplied hardware secures fitting to raceway
and completes installation
•
10/10
www.adc.com • +1-952-938-8080 • 1-800-366-3891 10

Applications - Raceway Reconfigurations
Expandable Straight Sections

ADC's expandable straight section simplifies installation and enhances the overall flexibility of the
raceway system. The innovative straight section also provides an access point for future reconfigurations.
Available in 4-, 6-, and 12-inch widths, the expandable straight section reduces the installation time
necessary to connect opposing runs and provides continuous support for patch cords.
Applications
Raceway system with gap between opposing runs

104892AE
Expandable straight section extends to connect runs

•
10/10
Completed installation
www.adc.com • +1-952-938-8080 • 1-800-366-3891 11

Applications - Supporting Overhead Systems
A variety of support kits are available for each FiberGuide® system. Whenever possible, FiberGuide
support kits should be attached to existing hardware (cable racks, digital cableways, existing threaded
rods or equipment racks).
2x6, 4x4, 4x6 Systems
Auxiliary Framing Unistrut Nut Kit

Support Kit Ladder Rack
Bracket Kit
Applications
Threaded Rod Threaded Rod

Threaded Rod
New Threaded Rod New Threaded Rod
Bracket Kit Bracket Kit
New Threaded
Rod Bracket Kit
Auxiliary Framing Support Unistrut Support Ladder Rack Support
Center Support
Bracket Kit
Top Support
Threaded Rod
C-Bracket
Threaded Rod
Top of Rack/Cabinet Support Anchor Support
4x12 System
104892AE
Unistrut Nut Kit
Threaded Rod
Center Support
Bracket Kit Top Support Low Threaded Rod
Threaded Rod Profile C-Bracket
•
Trapeze
Bracket Kit
10/10
Trapeze Bracket Kit Top of Rack/Cabinet Support Anchor Support
www.adc.com • +1-952-938-8080 • 1-800-366-3891 12

Applications - Supporting Overhead Systems
4x12 and 4x24 Systems

The straight sections on the 4x12 and 4x24 FiberGuide® system are exceptionally strong, making
frequent placement of supports beneath them unnecessary. Whenever possible the supports should
be placed under the fittings using the mounting bosses as shown (photos 1 and 2). This placement
provides the strongest system and requires the least amount of support hardware to be used.
Occasionally it is not possible to attach the support bracket to the mounting bosses on the fittings;
in those instances the variable fitting support locator can be installed on the bottom of the fitting,
allowing the support to be attached anywhere along the fitting bottom (photos 3, 4 and 5). When
combining several straight sections, it is recommended that support brackets are installed on both
sides of each junction.
Applications
Typical 4x12 system installation over a Next Generation Frame Line-up
1 2
104892AE
•
3 4 5
10/10
Variable Fitting Support Locator
Note: See pages 54 and 64 for 4x12 and 4x24 system fittings.
www.adc.com • +1-952-938-8080 • 1-800-366-3891 13


Recommended and Maximum Patch Cord Densities............ 16
Things to Consider when Ordering................................. 17-18
www.adc.com • +1-952-938-8080 • 1-800-366-3891 15

Recommended and Maximum Patch Cord Densities
Recommended capacity takes into consideration random jumper placement into the FiberGuide®
system. Maximum density refers to the maximum number of fiber jumpers in a given cross-section of
a FiberGuide installation. The TracerLight® Connector Identification System is ADC's newest patch cord
solution. It features slightly different dimensions than standard patch cords.
Recommended/Maximum Density
1.7 mm 2.0 mm 3.0 mm
Patch Cords (per in2) Patch Cords (per in2) Patch Cords (per in2)
120/142 90/102 40/44

Trough Pileup TracerLight® Patch Cords—

Recommended/Maximum Density 65 Patch Cords per in2

2-Inch 3-Inch 4-Inch 2-inch 3-inch 4-inch
4x24 System 4x24 System 3120 4680 6420
1.7 mm 5760/6816 8640/10224 11520/13632 4x12 System 1560 2340 3120
2.0 mm 4320/4869 6480/7344 8640/9792 4x6 System 780 1170 1560
3.0 mm 1920/2112 2880/3168 3840/4224 4x4 System 520 780 1040
4x12 System 2x6 System 780 – –
1.7 mm 2880/3408 4320/5112 5760/6816 2x2 System 260 – –
2.0 mm 2160/2448 3240/3672 4320/4896
3.0 mm 960/960 1440/1584 1920/2112
4x6 System
1.7 mm 1440/1704 2160/2556 2880/3408
2.0 mm 1080/1224 1620/1836 2160/2448
104892AE
3.0 mm 480/528 720/792 960/1056

4x4 System
1.7 mm 960/1136 1440/1704 1920/2272
2.0 mm 720/816 1080/1224 1440/1632
3.0 mm 320/352 480/528 640/704
2x6 System
•
1.7 mm 1440/1740 – –
2.0 mm 1080/1224 – –
10/10
3.0 mm 480/528 – –
2x2 System
1.7 mm 480/568 –
2.0 mm 360/408 – –
3.0 mm 160/176 – –
www.adc.com • +1-952-938-8080 • 1-800-366-3891 16

Things to Consider When Ordering
For a more complete guide to engineering and planning a FiberGuide® installation, see ADCP-90-166,
4th Edition, Issue 3, March 1996, Section 4, Engineering and Installation Section. For additional technical
information see ADCP95-005.
For main aisle runs and/or installations above high density fiber frame equipment, consider the 12" and
24" FiberGuide product found on page 49 and 59 respectively.
For tributary runs and/or installations above fiber optic terminals (FOTs), consider the 4" and 6"
FiberGuide product found on page 31 and 41 respectively.
For height restricted environments, consider the 2x6" FiberGuide system found on page 25.
Consider the use of variable support locators for the 4x12" and 4x24" FiberGuide systems. The variable
support locators provide additional mounting options for support brackets underneath larger fittings
such as horizontal T's or elbows.

Consider the use of Express Exits™ rather than the traditional downspouts for bringing fiber out of a
straight section run and into a fiber optic terminal (FOT) bay. The Express Exit installs without tools and
does not require any cutting for installation.
Calculate the maximum potential amount of fiber in a given line-up to determine the proper sized
FiberGuide over that line-up. Considerations should be given to pile-up densities (see page 16 for
recommended pile-up densities) and redundant routing paths which will have an effect on proper
FiberGuide sizing.
See pages 65-68 for ordering information on Express Exits and pages 69-73 vertical slotted duct systems.
See pages 81-94 for ordering information on system and support kit accessories. Consider the use of
the retrofit fin kit for potentially high traffic areas on the 4x4" or 4x6" FiberGuide systems (fins come
molded into certain fittings on the 2x6", 4x12" and 4x24" systems). The fin helps to spread the pile-up
of jumpers efficiently across the width of a given FiberGuide system especially at horizontal turns and
intersections.
Catalog Number Quantity
1) Select the Desired FiberGuide Horizontal Components

104892AE
Horizontal Straight Sections (6-feet each)
2x2" System – Page 22

•

10/10
45°, 90° Horizontal Elbows, Straight Adapters and End Caps
www.adc.com • +1-952-938-8080 • 1-800-366-3891 17

Things to Consider When Ordering
Catalog Number Quantity
2) Select the Desired FiberGuide Vertical Components
45°, and 90° Up and Down Elbows


Downspouts, Trumpet Flares and Attachments
Express Exits and Vertical Slotted Duct Systems
Express Exit™ Family – Page 66

104892AE
Vertical Slotted Duct Systems – Page 70
3) Select the Desired FiberGuide Support Kits and Accessories
FiberGuide Support Kits

•
2x6", 4x4" and 4x6" System – Page 86

10/10
For accessories including attachment hardware and threaded rod, see pages 95-97.
www.adc.com • +1-952-938-8080 • 1-800-366-3891 18

2x2 System
Fittings................................................................................. 20
Downspouts and Attachments............................................. 21
2x2 System
Straight Section and Junction............................................... 22
Part Drawings.................................................................. 23-24
www.adc.com • +1-952-938-8080 • 1-800-366-3891 19

2x2 System
Fittings – 2" H x 2" W
Horizontal T Horizontal Cross 45° Horizontal Elbow

(FGS-MHTA-C) (FGS-MHXP-C) (FGS-MH4A-C)
90° Horizontal 90° Extended 45° Up Elbow

Elbow Horizontal Elbow (FGS-MU4A-C)
(FGS-MH9A-C) (FGS-MH9A-C-45/2)
2x2 System
45° Down Elbow 2x2 to 4x4 End Cap

(FGS-MD4A-C) Straight Adapter (FGS-HMEC-C)
(FGS-MDSA-AC)
Ordering Information
Catalog Number
Number of
Description Junctions Yellow System Black System
2x2 fittings
104892AE
Horizontal T; cover included 3 FGS-MHTA-C FGSB-MHTA-C

Horizontal cross; cover and two 2+2 FGS-MHXP-C FGSB-MHXP-C
2x2 junctions included; two additional
2x2 junctions required (see p. 22)
45° horizontal elbow; cover included 2 FGS-MH4A-C FGSB-MH4A-C
90° horizontal elbow; cover included 2 FGS-MH9A-C FGSB-MH9A-C
90° extended horizontal elbow; cover 2 FGS-MH9A-C-45/2 FGSB-MH9A-C-45/2
•
included; similar to two 45° horizontal

elbows joined
10/10
45° up elbow; cover included 2 FGS-MU4A-C FGSB-MU4A-C

90° up elbow; cover included 2 FGS-MU9A-C FGSB-MU9A-C
45° down elbow; cover included 2 FGS-MD4A-C FGSB-MD4A-C
90° down elbow; cover included 2 FGS-MD9A-C FGSB-MD9A-C
2x2 conversions
2x2 to 4x4 straight adapter; cover included (1) 2x2, (1) 4x4 FGS-MDSA-AC FGSB-MDSA-AC
2x2 end cap
End cap; junction included –– FGS-HMEC-C FGSB-HMEC-C
Other nonstandard colors avalable by request
www.adc.com • +1-952-938-8080 • 1-800-366-3891 20

2x2 System
Downspouts and Attachments – 2" H x 2" W
2x2 Standard Downspout 2x2 Extended Downspout Extended Downspout

(FGS-MSDS-C) (FGS-MDSP-C) (FGS-KDH2-C shown attached to
2x2 FiberGuide system)
2x2 System
Dual 7/8" Flex Tube Attachment Dual 7/8" Flex Tube Attachment 2x2 Trumpet Flare
(FGS-KT03-C) (FGS-KT03-C shown attached (FGS-MTRM-C)
to downspout)
Catalog Number
Number of
2x2 downspouts
Standard downspout; cover included 2 FGS-MSDS-C FGSB-MSDS-C
Extended downspout; cover included 1 FGS-MDSP-C FGSB-MDSP-C
104892AE
Extended downspout; cover and 2" flex tube, 1 FGS-KDH2-C FGSB-KDH2-C

2' long, included
Trumpet flare; 2x2 junction included – FGS-MTRM-C FGSB-MTRM-C
2x2 attachments
2x2 flex tube attachment – 2" flex tube and a 2x2 junction included
5' length – FGS-MEX1-C-5F FGSB-MEX1-C-5F
•

10/10
Dual 7/8" flex tube attachment – two lengths of 7/8" flex tube and a 2x2 junction included
(2) 5' length – FGS-KT03-C FGSB-KT03-C
(2) 10' length – FGS-KT03-C-10F FGSB-KT03-C-10F
(2) 15' length – FGS-KT03-C-15F FGSB-KT03-C-15F
Flex tube clamp kit of 10; – FGS-HSHC-10 FGS-HSHC-10
attaches 7/8" flex tube to rack
www.adc.com • +1-952-938-8080 • 1-800-366-3891 21

2x2 System
Straight Section and Junction – 2" H x 2" W
Straight Section
The 2x2 straight section is a U-shaped trough that provides a
protective raceway for optical fibers. Available in 6-foot lengths, the
straight section carries fibers horizontally throughout the system. It
can also be installed vertically when routing around obstructions. A
warning label indicating caution around fiber optic cable is included
with each junction kit. Horizontal Straight Section
(FGS-MSHA-C)
Catalog Number
Description Yellow System Black System
2x2 straight section; FGS-MSHA-C FGSB-MSHA-C
horizontal straight section; 6' long, cover included
2x2 System
Junction
The 2x2 junction is used for mechanically joining FiberGuide®
sections. No tools are required for assembly.
Junction
(FGS-MJWR-C)
Catalog Number
104892AE
2x2 junction FGS-MJWR-C FGSB-MJWR-C

•
10/10
www.adc.com • +1-952-938-8080 • 1-800-366-3891 22

2x2 System
Part Drawings
203 mm
(8")
203 mm (8")
56 mm
(2.2")
130 mm Top
(5.1") Top
26 mm
(10.1")
51 mm
53 mm (2")
End (2.1")
52 mm
51 mm (2") (2.1") Front
Horizontal T Horizontal Cross

(FGS-MHTA-C) (FGS-MHXP-C)
2x2 System
127 mm
(4.99")
12 mm
(4.6")
127 mm
51 mm
(4.99")
(2")
Top
51 mm
(2")
51 mm
(2")
5 mm 51 mm
(2") (2")
Front
45° Horizontal Elbow 90° Horizontal Elbow

(FGS-MH4A-C) (FGS-MH9A-C)
104892AE
171 mm 56 mm 56 mm 117 mm
(6.75") (2.2") (2.22") (5")
171 mm
(6.75")
9 mm
(.34") 53 mm
(2.1")
Top
51 mm Side
•
53 mm (2")
(2.1")
51 mm
10/10
End End
(2")
90° Extended Horizontal Elbow 45° Up Elbow

(FGS-MH9A-C-45/2) (FGS-MU4A-C)
www.adc.com • +1-952-938-8080 • 1-800-366-3891 23

2x2 System
Part Drawings
51 mm
56 mm
(2.2") (2")
53 mm 167 mm
(2.1") (6.6")
84 mm Top
(3.3")
144 mm
(5.7")
102 mm
51 mm 115 mm (4")
(2") (4.5")
End Side 112 mm

(4.4")
Front
45° Down Elbow 2x2 to 4x4 Straight Adapter

(FGS-MD4A-C) (FGS-MDSA-AC)
329 mm 59 mm
(13") (2.3") 127 mm
2x2 System
(5")
90 mm
(3.5")
139 mm
Top (5.4")
53 mm
(2.1")
128 mm
(5.1")
51 mm End
(2") Side
Front
Standard Downspout Extended Downspout

(FGS-MSDS-C) (FGS-KDH2-C)
104892AE
51 mm
(2")
51 mm
(2") 129 mm
(5.1")
End Side
51 mm (2") 53 mm
13 mm (0.5") 47 mm (2.1")
13 mm (0.5") (1.9")
13 mm (0.5")
51 mm Bottom 47 mm
(1.9")
(2") 102 mm (4") 51 mm
183 mm (72") (2")
•
Horizontal Straight Section 90º Up Elbow

(FGS-MSHA-C) (FGS-MU9A-C)
10/10
51 mm
(2")
47 mm
(1.9")
53 mm
(2.1") 47 mm
(1.9")
125 mm
(4.9")
51 mm
(2")
90º Down Elbow

(FGS-MD9A-C)
www.adc.com • +1-952-938-8080 • 1-800-366-3891 24

2x6 System
Fittings, Downspouts and Attachments – 2" H x 6" W........ 26

Low-Profile Express Exit™..................................................... 26
Straight Section – 2" H x 6" W............................................ 28
Junction – 2" H x 6" W....................................................... 28
2x6 System
Part Drawings....................................................................... 29
www.adc.com • +1-952-938-8080 • 1-800-366-3891 25

2x6 System
Fittings, Downspouts and Attachments – 2" H x 6" W
Number of Yellow System Black System
Description Junctions Catalog Number Catalog Number
2x6 fittings
Horizontal T 3 FGS-MHRT-G FGSB-MHRT-G
Horizontal cross 4 FGS-MHXP-G FGSB-MHXP-G
90° horizontal elbow 2 FGS-MH9E-G FGSB-MH9E-G
90° down elbow 2 FGS-MD9E-G FGSB-MD9E-G
45° horizontal elbow 2 FGS-MH4E-G FGSB-MH4E-G

45° up elbow, metal cover included 2 FGS-MU4E-G FGSB-MU4E-G
45° down elbow 2 FGS-MD4E-G FGSB-MD4E-G
2x6 conversions
2x6 to 4x4 adapter (1) 2x6, (1) 4x4 FGS-MDSA-GA FGSB-MDSA-GA
2x6 to 4x6 adapter (1) 2x6, (1) 4x6 FGS-MDSA-GB FGSB-MDSA-GB
Trumpet flare – FGS-MTRM-G FGSB-MTRM-G
2x6 downspouts
2x6 System
2x6 to 2x2 downspout 2 FGS-MDSP-G FGSB-MDSP-G

2x6 attachments
Dual 2" flex tube attachment – FGS-KT03-G-5F FGSB-KT03-G-5F
2x6 end cap – FGS-HMEC-G FGS-HMEC-G
Low-Profile Express Exit™

Designed for low-ceiling or height restricted environments, the Express
Exit™ for the 2x6 FiberGuide® system extends only two inches above
104892AE
the straight section sidewall. The Express Exit accommodates up to

150 (3 mm) patch cords, includes removable rear cable guides for
additional cable management, and features a 2x2 exit opening. It is
designed specifically for the 2x6 FiberGuide system and should not be
Express Exit
used on any other FiberGuide system. (FGS-MEXP-LP-G)
•
Yellow System Black System

Description Catalog Number Catalog Number
10/10
Low-Profile Express Exit™ (designed exclusively for the 2x6 FGS-MEXP-LP-G FGSB-MEXP-LP-G
system)
Base, cover, mounting hardware, and support bracket included
www.adc.com • +1-952-938-8080 • 1-800-366-3891 26

2x6 System
Fittings, Downspouts and Attachments – 2" H x 6" W
2x6 to 2x2 Downspout Horizontal T Horizontal Cross

(FGS-MDSP-G) (FGS-MHRT-G) (FGS-MHXP-G)
90° Horizontal Elbow 90° Down Elbow 45° Horizontal Elbow

(FGS-MH9E-G) (FGS-MD9E-G) (FGS-MH4E-G)
2x6 System
45° Up Elbow 45° Down Elbow 2x6 to 4x4 Adapter
(FGS-MU4E-G) (FGS-MD4E-G) (FGS-MDSA-GA)
(Metal Cover Included)
104892AE
2x6 to 4x6 Adapter Trumpet Flare

(FGS-MDSA-GB) (FGS-MTRM-G)
•
10/10
www.adc.com • +1-952-938-8080 • 1-800-366-3891 27

2x6 System
Straight Section and Junction – 2" H x 6" W
Straight Section
The unique four-channel design of the 2x6 FiberGuide® straight section allows the standard system to
be attached to the support structure without the need to cut or drill any holes within the trough. This
ensures that the patch cords will not come in contact with any screw heads or bolts.
2x6 straight section; FGS-MSHS-G FGSB-MSHS-G

horizontal straight section; 6' long, cover sold seperately
2x6 accessories
2x6 hinged cover kit for horizontal straight section; three mount- FGS-MSNC-B/G FGSB-MSNC-B/G
ing hinges and three clips included
6-inch snap-on cover kit for horizontal straight section; six cap- FGS-MSSC-B/G FGSB-MSSC-B/G
ture clips with mounting clasps included
Kit-10 black capture clips* FGS-DHCP FGS-DHCP
*See drawings on page 30 for more detail on how capture

clips and hinges are used.
2x6 System
Straight Section Hinged Cover Kit for 6-inch Snap-on Cover

(FGS-MSHS-G) Horizontal Straight Section (FGS-MSSC-B/G)
104892AE
(FGS-MSNC-B/G)
Junction
•
The one-piece junction employs factory-installed set screws to assure

strength and durability. No cutting or drilling of the components is
10/10
required for assembly. A warning label indicating caution around fiber

optic cable is included with each junction kit.
2x6 Junction
(FGS-JUNC-G)
2x6 junction FGS-JUNC-G FGSB-JUNC-G
www.adc.com • +1-952-938-8080 • 1-800-366-3891 28

2x6 System
Part Drawings
356 mm 343 mm 343 mm
(14") (13.5") (13.5")
343 mm
195 mm (13.5")
(7.7")
269 mm
(10.6")
51 mm
(2")
14"
(356 mm) 45 mm 45 mm
152 mm
(6") (1.75") 152 mm (1.75")
(6")
29 mm
(1.1")
2x6 to 2x2 Downspout Horizontal T Horizontal Cross

(FGS-MDSP-G) (FGS-MHRT-G) (FGS-MHXP-G)
269 mm
(10.6")
35.6 mm
(1.4")
196 mm
2x6 System
(7.7")
269 mm 152 mm
(10.6") (6")
36 mm
(1.4") 45 mm
(1.75")
36 mm
152 mm (1.4")
(6") 45 mm
(1.75")
145 mm 36 mm
(5.7") (1.4")
90º Horizontal Elbow 90º Down Elbow

104892AE
(FGS-MH9E-G) (FGS-MD9E-G)
231 mm
(9.1")
226 mm 45°
(8.9")
36 mm
•
(1.4") 196 mm
1 (7.7")
152 mm
10/10
196 mm (6")
(7.7")
152 mm
(6")
44.5 mm
44.5 mm (1.75")
(1.75")
45º Horizontal Elbow 45º Up Elbow

(FGS-MH4E-G) (FGS-MU4E-G)
www.adc.com • +1-952-938-8080 • 1-800-366-3891 29

2x6 System
Part Drawings
221 mm
57 mm (8.7") 188 mm
(2.25") (7.4")
165 mm
(6.5")
196 mm 196 mm
(7.7") (7.7")
51 mm
(2")
196 mm
145 mm (7.7") 262 mm
(5.7") (10.3")
191 mm 152 mm
(7.5") (6") 51 mm
81 mm 76 mm (2")
86 mm
(3.2") (3.4") (3")
41 mm 53 mm
56 mm (1.6") (2.1")
(2.2")
114 mm
(4.5") 71 mm
(2.8")
2x6 to 4x4 Adapter 2x6 to 4x6 Adapter Trumpet Flare

(FGS-MDSA-GA) (FGS-MDSA-GB) (FGS-MTRM-G)
140 mm
196 mm (5.5")
133 mm (7.7")
(5.2") 152 mm
(6")
2x6 System
268 mm 99 mm
(10.6") (3.9")
131 mm
47 mm (5.16")
(1.9")
Low-Profile 45º Down Elbow

Express Exit™ Downspout (FGS-MD4E-G)
(FGS-MEXP-LP-G)
224 mm
(8.8")
33 mm
104892AE
(1.31")
70 mm
(2.75")
152 mm 3 mm
71 mm (6")
(2.8") (.125")
45 mm 160 mm
(1.75") 51 mm (6.3")
3 mm (2") 152 mm
(.125") (6")
57 mm
(2.25") 119 mm
•
(4.7")
127 mm
(5")
10/10
Straight Section Junction

(FGS-MSHS-G) (FGS-JUNC-G)
210 mm 188 mm
(8.3") (7.4")
24 mm 16 mm
(1") (6.25")
93 mm End 83 mm
Side Side (3.25") End
(3.7")
Straight Section Straight Section

(Not Included) (Not Included)
Hinged Covers for Straight Section Snap-on Covers for Horizontal Straight Section
(FGS-MSNC-B/G) (FGS-MSSC-B/G)
www.adc.com • +1-952-938-8080 • 1-800-366-3891 30

4x4 System
Fittings............................................................................ 32-33
Downspouts and Attachments........................................ 34-35
Straight Section.................................................................... 36
Snap-Fit™ Junction................................................................ 36
Part Drawings.................................................................. 37-39
4x4 System
www.adc.com • +1-952-938-8080 • 1-800-366-3891 31

4x4 System
Catalog Number
Yellow Black
Number System System Fixed
of Snap-on Snap-on Metal
Description Junctions Yellow System Cover Black System Cover Cover
4x4 fittings
Horizontal T 3 FGS-MHRT-A FGS-SHRT-A FGSB-MHRT-A FGSB-SHRT-A FGS-CHRT-A
Horizontal cross 4 FGS-MHXP-A FGS-SHXP-A FGSB-MHXP-A FGSB-SHXP-A FGS-CHXP-A

90° horizontal 2 FGS-MH9E-A FGS-SH9E-A FGSB-MH9E-A FGSB-SH9E-A FGS-CH9E-A
elbow
90° up elbow 2 FGS-MU9E-A FGS-SU9E-A FGSB-MU9E-A FGSB-SU9E-A –
metal cover
included
90° down elbow 2 FGS-MD9E-A FGS-SD9E-A FGSB-MD9E-A FGSB-SD9E-A FGS-CD9E-A
45° horizontal 2 FGS-MH4E-A FGS-SH4E-A FGSB-MH4E-A FGSB-SH4E-A FGS-CH4E-A
elbow
45° up elbow 2 FGS-MU4E-A FGS-SU4E-A FGSB-MU4E-A FGSB-SU4E-A –
metal cover
4x4 System
included
45° down elbow 2 FGS-MD4E-A FGS-SD4E-A FGSB-MD4E-A FGSB-SD4E-A FGS-CD4E-A
4x4 conversions
4x4 to 4x6 (1) 4x4, FGS-MDSA-AB FGS-SDSA-AB FGSB-MDSA-AB FGSB-SDSA-AB FGS-CDSA-AB
straight adapter (1) 4x6
4x4 expandable 2 FGS-MVAR-A – FGSB-MVAR-A – –
straight section
4"Cut-in T – FGS-MHIS-A – FGSB-MHIS-A – –
assembly hard-
104892AE
ware included
6"Cut-in T – FGS-MHIS-B – FGSB-MHIS-B – –
assembly hard-
ware included
12"Cut-in T – FGS-MHIS-F – FGSB-MHIS-F – –
assembly hard-
ware included
Cut-in T fixture – FGS-MHIS-JIG-A/B/F – FGS-MHIS-JIG-A/B/F – –
•
4x4 end cap – FGS-HMEC-A – FGS-HMEC-A – –

10/10
www.adc.com • +1-952-938-8080 • 1-800-366-3891 32

4x4 System

(FGS-MHRT-A) (FGS-MHXP-A) (FGS-MH9E-A)
90° Up Elbow 90° Down Elbow 45° Horizontal Elbow

Metal Cover Included (FGS-MD9E-A) (FGS-MH4E-A)
(FGS-MU9E-A)
4x4 System
45° Up Elbow 45° Down Elbow 4x4 to 4x6 Straight Adapter
Metal Cover Included (FGS-MD4E-A) (FGS-MDSA-AB)
(FGS-MU4E-A)
104892AE
Expandable Straight Section Cut-in T Cut-in T Fixture

•
(FGS-MVAR-A) (FGS-MHIS-A) shown on straight section

(FGS-MHIS-JIG-A/B/F)
10/10
End Cap Snap-on Plastic Cover

(FGS-HMEC-A) (FGS-SH4E-A shown attached to 45°
horizontal elbow with junctions)
www.adc.com • +1-952-938-8080 • 1-800-366-3891 33

4x4 System
An array of 4x4 downspout options are available to feed fiber from overhead straight sections into fiber
optic equipment below.
Description Number of Yellow System Black System
Junctions Catalog Number Catalog Number
4x4 downspouts
Downspout 2** FGS-MDSP-A FGSB-MDSP-A
Cover for 4x4 downspout – FGS-MCDS-AB FGSB-MCDS-AB

Extended downspout 2* FGS-MDSP-EX-A FGSB-MDSP-EX-A
Cover for 4x4 extended downspout – FGS-MCDS-EX-AB FGSB-MCDS-EX-AB
Insertable downspout – FGS-MDSP-A/I FGSB-MDSP-A/I
Trumpet flare used on both 4x4 and 4x6 – FGS-MTRM-A FGSB-MTRM-A
downspouts; no 4" junction kit required
Downspout exit junction kit – FGS-MJWR-A FGSB-MJWR-A
4x4/4x6 downspout; insert converts bot- – FGS-HDSI-AB FGS-HDSI-AB
tom of downspout to 2x2" without using
2" to 4" adapter, saving vertical space
4x4 System
4x4 attachments
Square to 2" round adapter with flex tube;
one 4x4 junction kit (FGS-MJWR-A) required to attach to a downspout drop
5' length 1 FGS-ASRI-5F FGSB-ASRI-5F
Dual 2" flex tube attachment; no 4x4 junction kit required
(2) 5' length – FGS-KT03-A FGSB-KT03-A
104892AE
(2) 10' length – FGS-KT03-A10F FGSB-KT03-A10F

Single 2" flex tube attachment; no 4x4 junction kit required
5' length – FGS-KT03-A1 FGSB-KT03-A1
10' length – FGS-KT03-A1-10F FGSB-KT03-A1-10F
•
Quad 2" flex tube attachment; no 4x4 junction kit required

10/10
(4) 5' length – FGS-KT03-A4-5F FGSB-KT03-A4-5F

4x4 quad 7/8" flex tube attachment; no 4x4 junction kit required
*A third junction is needed if drop is to a fitting or straight section.

**This drop junction must be a junction type FGS-MJWR-A, FGSB-MJWR-A.
www.adc.com • +1-952-938-8080 • 1-800-366-3891 34

4x4 System
Downspout Cover for 4x4 Downspout Extended Downspout

(FGS-MDSP-A) (FGS-MCDS-AB) (FGS-MDSP-EX-A
shown with and without cover)
Insertable Downspout Trumpet Flare Downspout Exit

(FGS-MDSP-A/I) (FGS-MTRM-A) Junction Kit
(FGS-MJWR-A)
4x4 System
4x4/4x6 Downspout Insert 4" Square to 2" Round Dual 2"
(FGS-HDSI-AB) Adapter with Flex Tube Flex Tube Attachment
(FGS-ASRI (FGS-KT03-A)
104892AE
requires FGS-MJWR-A
Junction Kit)
•
10/10
Single 2" 2" Quad Flex

Flex Tube Attachment Tube Attachment
(FGS-KT03-A1) (FGS-KT03-A4)
www.adc.com • +1-952-938-8080 • 1-800-366-3891 35

4x4 System
Straight Section and Snap-Fit™ Junction – 4" H x 4" W
Straight Section
The unique four-channel design of the 4x4 FiberGuide® straight section allows the standard system
to be attached to the support structure without the need to cut or drill any holes within the trough.
This ensures that the patch cords will not come in contact with any screw heads or bolts, an important
consideration in 4x4 systems where higher cable counts apply increased pressure on patch cords at the
bottom of the trough.
Horizontal Expandable Hinged Cover for Snap-On

Straight Section Straight Section Horizontal Straight Cover for Horizontal
(FGS-MSHS-A) (FGS-MVAR-A) Section Straight Section
(FGS-MSNC-A) (FGS-MSSC-A)
Catalog Number
4x4 System

4x4 straight section
Horizontal straight section; 6' long, cover sold seperately FGS-MSHS-A FGSB-MSHS-A
Expandable straight section FGS-MVAR-A FGSB-MVAR-A
4x4 accessories
Hinged cover kit for horizontal straight section; FGS-MSNC-A FGSB-MSNC-A
includes three mounting hinges and three clips
Snap-on cover kit for horizontal straight section; FGS-MSSC-A FGSB-MSSC-A
includes six capture clips with mounting clasps
104892AE
Kit - 10 black capture clips* FGS-DHCP FGS-DHCP

Kit - 10 black capture clips and 10 hinges* FGS-DHHC FGSB-DHHC
(Yellow Hinge) (Black Hinge)
*See drawings on page 40 for more detail on how capture clips and hinges are used
Other nonstandard colors avalable by request.
Snap-Fit™ Junction
•
The Snap-Fit™ junction assembly is available for the 4-inch

10/10
FiberGuide® system. The Snap-Fit junction is a completely tool-less

junction. No additional tools are required for installation or removal.
The junction exhibits superior holding force and accommodates
support brackets. A warning label indicating caution around fiber
optic cable is included with each junction kit.
Snap-Fit Junction
(FGS-MFAW-A)
Catalog Number
4x4 Snap-Fit junction
™
FGS-MFAW-A FGSB-MFAW-A
www.adc.com • +1-952-938-8080 • 1-800-366-3891 36

4x4 System
Part Drawings
330 mm
330 mm (13")
(13")
Top 330 mm
27 mm (13") Top
(9.3")
102 mm
(4") 102 mm
(4")
112 mm
(4.4") 112 mm
(4.4")
Front Front

(FGS-MHRT-A) (FGS-MHXP-A)
237 mm (9.3") 260 mm

120 mm 165 mm
(10.2")
(4.7") (6.5")
237 mm R 51 mm
(9.3") Top (2")
218 mm
(8.6")
4x4 System
260 mm
(10.2")
102 mm (4") Side End
112 mm (4.4")
218 mm Junction Detail
(8.6") (Not Included)
End
90° Horizontal Elbow 90° Up Elbow

(FGS-MH9E-A) (FGS-MU9E-A)
102 mm 208 mm
104892AE
(4") (8.19") 223 mm

(8.8")
Top
194 mm
Side 208 mm (7.7")
(8.2")
End 102 mm (4")
144 mm 112 mm (4.4")

112 mm
(5.7") (4.4")
•
End
10/10
90° Down Elbow 45° Horizontal Elbow

(FGS-MD9E-A) (FGS-MH4E-A)
www.adc.com • +1-952-938-8080 • 1-800-366-3891 37

4x4 System
Part Drawings
251 mm (10")
102 mm (4") 45°
Top
163 mm
(6.4") 203 mm
(8")
Junction Detail
R 51 mm (Not Included)
(2")
Side
End
166 mm (6.6")
203 mm Side
(8") 112 mm
(4.4") 123 mm
144 mm
163 mm (4.9")
124 mm (5") (5.7")
210 mm (8.3") (6.4")
45° Up Elbow 45° Down Elbow

(FGS-MU4E-A) (FGS-MD4E-A)
195 mm (7.7")
Top
186 mm
(7.3") 356 mm
(14")
144 mm Retracted Straight Section
(5.7")
102 mm (4")
4x4 System
559 mm
112 mm (4.4") (22")
Front
Expanded Straight Section
4x4 to 4x6 Straight Adapter Expandable Straight Section

(FGS-MDSA-AB) (FGS-MVAR-A)
345.2 mm
(13.6") 254 mm
(10")
159 mm
104892AE
(6.25")
329 mm 144 mm 112 mm

(13") (5.7") Front (4.4")
330 mm
(13")
Top
102 mm
(4")
160 mm
102 mm 44 mm 144 mm (6.3")
(4") (1.75") (5.7")
305 mm
•
(12")
10/10
Cut-in T Downspout
(FGS-MHIS-A) (FGS-MDSP-A)
329 mm
330 mm (13")
(13") 137 mm
(5.4")
.625"
(Not Included)
330 mm
133 mm (13")
279 mm 211 mm (5.25") Side End
(11") (8.3")
102 mm 102 mm
(4") 144 mm
(5.7") (4")
Extended Downspout Snap-On Cover for

Straight 4" Straight Section
Section
(FGS-MDSP-EX-A) (Not Included)
(FGS-MSSC-A)
www.adc.com • +1-952-938-8080 • 1-800-366-3891 38

4x4 System
Part Drawings
R 51 mm (2") 213 mm
CLOSE
OPEN
76 mm (8.4")
51 mm (2")
Top (3")
103 mm
211 mm
(4")
(8.3")
End
159 mm (6.25")
104 mm
(4.1")
Trumpet Flare 4x4/4x6 Downspout Insert

(FGS-MTRM-A) (FGS-HDSI-AB)
116 mm 144 mm (5.7")

(4.6") 102 mm
(4") Side
144 mm
102 mm End
(5.7") 116 mm
(4") (4.55")
4x4 System
117 mm
(4.6")
Dimension X 183 mm (72")
1.52 m (5')
X 3.05 m (10')
3.57 m (15')
4" Square to 2" Round Adapter Horizontal Straight Section

with Flex Tube (FGS-MSHS-A)
(FGS-ASRI-X*)
104892AE
108 mm
(4.25")
159 mm
(6.3")
173 mm
24 mm (6.8")
(1")
102 mm179 mm
137 mm (4.0") (7")
(5.4") Side End
143 mm
•
140 mm(5.6")
(5.51")
10/10
Straight Section
(Not Included)
102 mm
(4")
Hinged Cover for 4" Horizontal Snap-Fit Junction
Straight Section (FGS-MFAW-A)
(FGS-MSNC-A)
*Replace X with tube length as follows: 5F=5 feet, 10F=10 feet, 15F=15 feet
www.adc.com • +1-952-938-8080 • 1-800-366-3891 39

4x6 System
Fittings............................................................................ 42-43
Parts Drawings................................................................ 47-48
4x6 System
www.adc.com • +1-952-938-8080 • 1-800-366-3891 41

4x6 System
Catalog Number
Yellow Black
Number System System Fixed
of Snap-on Snap-on Metal
Description Junctions Yellow System Cover Black System Cover Cover
4x6 fittings
Horizontal T 3 FGS-MHRT-B FGS-SHRT-B FGSB-MHRT-B FGSB-SHRT-B FGS-CHRT-B
Horizontal cross 4 FGS-MHXP-B FGS-SHXP-B FGSB-MHXP-B FGSB-SHXP-B FGS-CHXP-B

90° horizontal 2 FGS-MH9E-B FGS-SH9E-B FGSB-MH9E-B FGSB-SH9E-B FGS-CH9E-B
elbow
90° up elbow 2 FGS-MU9E-B – FGSB-MU9E-B – FGS-CU9E-B
metal cover
included
90° down elbow 2 FGS-MD9E-B FGS-SD9E-B FGSB-MD9E-B FGSB-SD9E-B FGS-CD9E-B
45° horizontal 2 FGS-MH4E-B FGS-SH4E-B FGSB-MH4E-B FGSB-SH4E-B FGS-CH4E-B
elbow
45° up elbow 2 FGS-MU4E-B FGS-SU4E-B FGSB-MU4E-B FGSB-SU4E-B FGS-CU4E-B
metal cover
included
45° down elbow 2 FGS-MD4E-B FGS-SD4E-B FGSB-MD4E-B FGSB-SD4E-B FGS-CD4E-B
4x6 conversions
4x6 System
4x4 to 4x6 (1) 4x4, FGS-MDSA-AB FGS-SDSA-AB FGSB-MDSA-AB FGSB-SDSA-AB FGS-CDSA-AB

straight adapter (1) 4x6
4x12 to single – FGS-MDSA-FB FGS-SDSA-FB FGSB-MDSA-FB FGSB-SDSA-FB –
4x6 adapter
4x6 expandable 2 FGS-MVAR-B – FGSB-MVAR-B – –
straight section
104892AE
4" Cut-in T; – FGS-MHIS-A – FGSB-MHIS-A – –

assembly hard-
ware included
6" Cut-in T; – FGS-MHIS-B – FGSB-MHIS-B – –
assembly hard-
ware included
12" Cut-in T; – FGS-MHIS-F – FGSB-MHIS-F – –
assembly hard-
•
ware included
10/10
Cut-in T fixture – FGS-MHIS-JIG-A/B/F – FGS-MHIS-JIG-A/B/F – –

4x6 end cap – FGS-HMEC-B – FGS-HMEC-B – –
www.adc.com • +1-952-938-8080 • 1-800-366-3891 42

4x6 System

(FGS-MHRT-B) (FGS-MHXP-B) (FGS-MH9E-B)
90° Up Elbow 90° Down Elbow 45° Horizontal Elbow

Cover Included (FGS-MD9E-B) (FGS-MH4E-B)
(FGS-MU9E-B)
4x6 System
45° Up Elbow 45° Down Elbow 4x4 to 4x6 Straight Adapter
Cover Included (FGS-MD4E-B) (FGS-MDSA-AB)
(FGS-MU4E-B)
104892AE
Expandable 6" Cut-in T Cut-in T Fixture

Straight Section (FGS-MHIS-B) (FGS-MHIS-JIG-A/B/F shown on
•
(FGS-MVAR-B) a straight section)

10/10
4x12 to Single 4x6 Adapter End Cap Snap-on Plastic Cover

(FGS-MDSA-FB) (FGS-HMEC-B) (FGS-SH4E-B shown attached
(Cover: FGS-SDSA-FB) to 45° horizontal elbow
with junctions)
www.adc.com • +1-952-938-8080 • 1-800-366-3891 43

4x6 System
4x6 downspouts and attachments feed fiber from overhead straight sections into fiber optic equipment
below. All 4x6 downspouts feature 4-inch exits and attach to the 4-inch x 4-inch attachments listed below.
Catalog Number
Number of
4x6 downspouts
Downspout Note: If a trumpet flare is required 2* FGS-MDSP-B FGSB-MDSP-B
use a 4x4 flare (FGS-MTRM-A)
Cover for 4x6 downspout and dual downspout – FGS-MCDS-AB** FGSB-MCDS-AB**
Extended downspout 2 FGS-MDSP-EX-B FGSB-MDSP-EX-B

Cover for 4x6 extended downspout – FGS-MCDS-EX-AB FGSB-MCDS-EX-AB
Insertable downspout – FGS-MDSP-B/I FGSB-MDSP-B/I
Dual drop downspout 2* FGS-MDSP-2B FGSB-MDSP-2B
Trumpet flare for dual drop downspout – FGS-MTRM-2B FGSB-MTRM-2B
(kit of 2 FGS-MTRM-A)
Dual drop downspout with divider 2 FGS-MDSP-2B-IMP FGSB-MDSP-2B-IMP
Trumpet flare for dual drop downspout with divider (kit of 2) FGS-MTRM-2B-IMP FGSB-MTRM-2B-IMP
Downspout with exit junction FGS-MJWR-A FGSB-MJWR-A
4x4/4x6 downspout insert; converts bottom of downspout to FGS-HDSI-AB FGS-HDSI-AB
2x2 without using 2" to 4" adapter, saving vertical space
Trumpet flare; used on both 4x4 and 4x6 downspouts — FGS-MTRM-A FGSB-MTRM-A
no 4" junction kit required
4x6 System
4x6 attachments
4x4 square to 2" round adapter with flex tube;
one 4x4 junction kit (FGS-MJWR-A) required to attach to a downspout drop
104892AE

4x4 dual 2" flex tube attachment; no 4x4 junction kit required
(2) 5' length – FGS-KT03-A FGSB-KT03-A
4x4 single 2" flex tube attachment; no 4x4 junction kit required
5' length – FGS-KT03-A1 FGSB-KT03-A1
•

10/10

4x4 quad 2" flex tube attachment; no 4x4 junction kit required
4x4 quad 7/8" flex tube attachment; no 4x4 junction kit required
*A 4x4 junction is needed to drop to a fitting or a straight section. This drop junction must be a junction type FGS-MJWR-A
or FGSB-MJWR-A.
**Dual downspout requires two covers.
www.adc.com • +1-952-938-8080 • 1-800-366-3891 44

4x6 System
Downspout Cover for 4x6 Downspout Extended Downspout

(FGS-MDSP-B) (FGS-MCDS-AB) (FGS-MDSP-EX-B
shown with and without cover)
Insertable Downspout Dual Downspout Dual Downspout

(FGS-MDSP-B/I) (FGS-MDSP-2B) with Divider
(FGS-MDSP-2B-IMP)
4x6 System
Trumpet Flare Kit for 4x6 Trumpet Flare Kit for Dual Single 2"
Dual Downspout Downspout with Divider Flex Tube Attachment
(FGS-MTRM-2B) (FGS-MTRM-2B-IMP) (FGS-KT03-A1)
104892AE
Trumpet Flare Kit 4x4/4x6 Downspout Insert Downspout Exit Junction Kit
•
(FGS-MTRM-A) (FGS-HDSI-AB) (FGS-MJWR-A)

10/10
4" Square to 2" Round Dual 2" Flex Tube 2" Quad Flex
Adapter with Flex Tube Attachment Flex Tube Attachment
(FGS-ASRI requires (FGS-KT03-A) (FGS-KT03-A4)
FGS-MJWR-A junction kit)
www.adc.com • +1-952-938-8080 • 1-800-366-3891 45

4x6 System
Straight Section and Snap-Fit™ Junction – 4" H x 6" W
Straight Section
The unique four-channel design of the 4x6 FiberGuide® straight section allows the standard system
to be attached to the support structure without the need to cut or drill any holes within the trough.
This ensures that the patch cords will not come in contact with any screw heads or bolts, an important
consideration in 4x6 systems where higher cable counts apply increased pressure on patch cords at the
bottom of the trough.
Horizontal Expandable Hinged Cover Kit 6" Snap-on Cover

Straight Section Straight Section for Horizontal for Horizontal
(FGS-MSHS-B) (FGS-MVAR-B) Straight Section Straight Section
(FGS-MSNC-B/G) (FGS-MSSC-B/G)
Catalog Number
4x6 straight sections
Horizontal straight section; 6' long, cover sold seperately FGS-MSHS-B FGSB-MSHS-B
Expandable straight section FGS-MVAR-B FGSB-MVAR-B
4x6 System
Slack storage straight section FGS-MSHS-STOR-B FGSB-MSHS-STOR-B

4x6 accessories
Hinged cover kit for horizontal straight section; FGS-MSNC-B/G FGSB-MSNC-B/G
includes three mounting hinges and three clips
6" snap-on cover kit for horizontal straight section; FGS-MSSC-B/G FGSB-MSSC-B/G
104892AE
includes six capture clips with mounting clasps

Kit - 10 black capture clips and 10 hinges* FGS-DHHC FGSB-DHHC
(Yellow Hinge) (Black Hinge)
*See drawings on page 50 for more detail on how capture clips and hinges are used.
•
Snap-Fit™ Junction
10/10
The Snap-Fit™ junction assembly is available for the 6-inch FiberGuide®

system. The new junction is a completely tool-less junction. No additional
tools are required for installation or removal. The Snap-Fit Junction
exhibits superior holding force and accommodates support brackets.
A warning label indicating caution around fiber optic cable is included
with each junction kit. Snap-Fit Junction
(FGS-MFAW-B)
Catalog Number
4x6 Snap-fit junction FGS-MFAW-B FGSB-MFAW-B
www.adc.com • +1-952-938-8080 • 1-800-366-3891 46

4x6 System
Part Drawings
381 mm
381 mm (15") (15") 288 mm
(11.3")
288 mm Top 381 mm

(11.3") 288 mm
(15") (11.3") Top
Top
152 mm (6") 152 mm

(6") 152 mm
(6")
112 mm 112 mm
(4.4")
(4.4")
112 mm
End
Front Front (4.4")

(FGS-MHRT-B) (FGS-MHXP-B) (FGS-MH9E-B)
259 mm 196 mm
Top (10.2") (7.7")
183 mm
114 mm 108 mm 86 mm (7.2")
(3.4") 13 mm
(4.5") (4.25") (.5")
245 mm
(9.7") 108 mm
112 mm (4.25")
152 mm
(4.4")
(6")
218 mm
(8.6")
End
4x6 System
45° Horizontal Elbow 90º Up Elbow
(FGS-MH4E-B) (FGS-MU9E-B)
251 mm (10")
Top
259 mm
213 mm
(10.2")
104892AE
Top (8.4")
Junction Detail
245 mm R 5.1 mm (Not Included)
(9.7") (2")
112 mm
152 mm
(4.4") 203 mm
(6") 166 mm
(8") (6.6")
Side
124 mm (4.9") 210 mm

End (8.3")
90° Down Elbow 45° Up Elbow

•
(FGS-MD9E-B) (FGS-MU4E-B)
10/10
152 mm (6")
45°
203 mm (8")
Side
End 123 mm
(4.9")
195 mm
112 mm
(7.7")
(4.4")
163 mm (6.4")
45° Down Elbow

(FGS-MD4E-B)
www.adc.com • +1-952-938-8080 • 1-800-366-3891 47

4x6 System
Part Drawings
396 mm
(15.6") 305 mm
(12")
R 51 mm
159 mm (2")
(6.25")
CLOSE
OPEN
356 mm Top
(14") 51 mm
263 mm 76 mm
Retracted Straight Section (2")
(10.4") (3")
381 mm
(15")
End
159 mm
152 mm (6.25")
559 mm (6")
(22")
356 mm
(14")
Expandable Straight Section 6" Cut-in T Trumpet Flare

(FGS-MVAR-B) (FGS-MHIS-B) (FGS-MTRM-B)
329 mm
329 mm (13") (13")
112 mm
Front (4.4")
Top 195 mm 160 mm

(7.7") (6.3")
330 mm
(13")
211 mm
144 mm (8.3")
(5.7")
102 mm 44 mm 102 mm
(4") (1.75") 144 mm
(5.7") (4")
Downspout Extended Downspout

4x6 System
(FGS-MDSP-B) (FGS-MDSP-EX-B)
195 mm (7.7") 188 mm

152 mm (7.4")
(6") 16 mm
(.625")
Side
102 mm End
104892AE
(4") 133 mm
(5.25") Side End
116 mm
(4.6")
183 mm
(72") Straight Section
(Not Included)
Horizontal Straight Section 6" Snap-On Cover for Straight Section

(FGS-MSHS-B) (FGS-MSSC-B/G)
•
10/10
108 mm
(4.25")
210 mm
(8.3") 224 mm
24 mm (8.8")
(1") 230 mm
152 mm
(9")
(6.0")
138 mm End
(5.4") Side 140 mm 305 mm 89 mm (3.5") 32 mm
(5.51")
143 mm (12") diameter (1.25")
(5.6")
Straight Section
(Not Included) 152 mm
(6")
Hinged Cover for Straight Section Snap-Fit Junction Assembly Slack Storage Straight Section
(FGS-MSNC-B/G) (FGS-MFAW-B) (FGS-MSHS-STOR-B)
www.adc.com • +1-952-938-8080 • 1-800-366-3891 48

4x12 System
Fittings............................................................................ 50-51
Part Drawings.................................................................. 56-58
4x12 System
www.adc.com • +1-952-938-8080 • 1-800-366-3891 49

4x12 System
Catalog Number
Number
of Yellow System Black System
Description Junctions Yellow System Snap-on Cover Black System Snap-on Cover
4x12 fittings
Horizontal T 3 FGS-MHRT-F FGS-SHRT-F FGSB-MHRT-F FGSB-SHRT-F
Horizontal cross 4 FGS-MHXP-F FGS-SHXP-F FGSB-MHXP-F FGSB-SHXP-F
90° horizontal elbow 2 FGS-MH9E-F FGS-SH9E-F FGSB-MH9E-F FGSB-SH9E-F
90° down elbow 2 FGS-MD9E-F FGS-SD9E-F FGSB-MD9E-F FGSB-SD9E-F

45° horizontal elbow 2 FGS-MH4E-F FGS-SH4E-F FGSB-MH4E-F FGSB-SH4E-F
45° up elbow 2 FGS-MU4E-F FGS-SU4E-F FGSB-MU4E-F FGSB-SU4E-F
45° down elbow 2 FGS-MD4E-F FGS-SD4E-F FGSB-MD4E-F FGSB-SD4E-F
Horizontal T (2) 4x12, FGS-MHRT-F/B FGS-SHRT-F/B FGSB-MHRT-F/B FGSB-SHRT-F/B
with single 6" exit (1) 4x6
Horizontal cross (2) 4x12, FGS-MHXP-B/F FGS-SHXP-B/F FGSB-MHXP-B/F FGSB-SHXP-B/F
with two 6" exits (2) 4x6
4x12 conversions
4x12 to dual 4x6 adapter (1) 4x12, FGS-MDSA-F2B FGS-SDSA-F2B FGSB-MDSA-F2B FGSB-SDSA-F2B
(2) 4x6
4x12 to single 4x6 adapter (1) 4x12, FGS-MDSA-FB FGS-SDSA-FB FGSB-MDSA-FB FGSB-SDSA-FB
(1) 4x6
4x12 to 4x6 right adapter; FGS-MDSA-FB-R FGS-MDSA-FB-R
includes fastening hardware
Fixed metal cover FGS-VDSA-FB-R FGS-VDSA-FB-R
4x12 System
for right adapter

4x12 to 4x6 left adapter; FGS-MDSA-FB-L FGS-MDSA-FB-L
104892AE
includes fastening hardware

Fixed metal cover FGS-VDSA-FB-L FGS-VDSA-FB-L
for left adapter
Expandable straight section 2 FGS-MVAR-F – FGSB-MVAR-F –
4" Cut-in T; – FGS-MHIS-A – FGSB-MHIS-A –
assembly hardware included
6" Cut-in T; – FGS-MHIS-B – FGSB-MHIS-B –
•
12" Cut-in T; – FGS-MHIS-F – FGSB-MHIS-F –

10/10

Cut-in T fixture – FGS-MHIS-JIG-A/B/F – FGS-MHIS-JIG-A/B/F –
4x12 end cap FGS-HMEC-F FGS-HMEC-F
4x12 variable support locator kits for; Each kit contains all necessary mounting hardware. Fitting sold separately.
FGS-MDSP-F (downspout) FGS-MDSP-F-VS FGS-MDSP-F-VS
FGS-MHRT-F (horizontal T) FGS-MHRT-F-VS FGS-MHRT-F-VS
FGS-MHXP-F (horizontal cross) FGS-MHXP-F-VS FGS-MHXP-F-VS
FGS-MH9E-F (90° horizontal elbow) FGS-MH9E-F-VS FGS-MH9E-F-VS
FGS-MHRT-F/B (horizontal T – 6"/12") FGS-MHRT-F/B-VS FGS-MHRT-F/B-VS
FGS-MHXP-B/F (horizontal cross– 6"/12") FGS-MHXP-B/F-VS FGS-MHXP-B/F-VS
www.adc.com • +1-952-938-8080 • 1-800-366-3891 50

4x12 System
Horizontal T Horizontal Cross 90° Horizontal Elbow 90° Down Elbow

(FGS-MHRT-F) (FGS-MHXP-F) (FGS-MH9E-F) (FGS-MD9E-F)
45° Horizontal Elbow 45° Up Elbow 45° Down Elbow Horizontal T

(FGS-MH4E-F) (FGS-MU4E-F) (FGS-MD4E-F) with Single 6" Exit
(FGS-MHRT-F/B)
Horizontal Cross 4x12 to Dual 4x6 4x12 to Single 4x6 4x12 to 4x6
4x12 System
with Two 6" Exits Adapter Adapter Adapter – Right
(FGS-MHXP-B/F) (FGS-MDSA-F2B) (FGS-MDSA-FB) (FGS-MDSA-FB-R)
104892AE
•
4x12 to 4x6 Adapter – Left End Cap Expandable 12" Cut-in T

(FGS-MDSA-FB-L) (FGS-HMEC-F) Straight Section (FGS-MHIS-F)
10/10
(FGS-MVAR-F)
Cut-in T Fixture Snap-on Cover Snap-on Cover Snap-on Cover

(FGS-MHIS-JIG-A/B/F shown (FGS-SH4E-F Installation (FGS-SH4E-F shown installed)
on a straight section) shown separate)
www.adc.com • +1-952-938-8080 • 1-800-366-3891 51

4x12 System
An array of 4x12 downspouts and attachments are available to feed fiber from overhead straight
sections into fiber optic equipment below. The 4x12 downspout features a 4x6 exit and accepts the 4x6
exit attachments listed below.
Number of Yellow System Black System
Description Junctions Catalog Number Catalog Number
4x12 downspouts
Downspout 2* FGS-MDSP-F FGSB-MDSP-F

Cover for 4x12 downspout – FGS-SDSP-F FGSB-SDSP-F
Insertable downspout – FGS-MDSP-F/I FGSB-MDSP-F/I
Trumpet flare – FGS-MTRM-F FGSB-MTRM-F
Downspout with rear T 3* FGS-MDRT-F FGSB-MDRT-F
Island T with spool and factory installed 2 FGS-ISLAND-F FGSB-ISLAND-F
trumpet flare; designed for use over ADC Next
Generation Frame Storage Bay
Island T with trumpet and dividing spool; 2 FGS-ISLAND-F-513 FGSB-ISLAND-F-513
designed for use over ADC 600 mm wide
Next Generation Frame – Variable Support
Locator Kit included
Island T with recessed dividing spool 3 FGS-ISLAND3-F FGSB-ISLAND3-F
4x12 attachments
4x6 dual 2" flex tube attachment
5' length – FGS-KT03-B FGSB-KT03-B
10' length – FGS-KT03-B-10F FGSB-KT03-B-10F
4x12 System
15' length – FGS-KT03-B-15F FGSB-KT03-B-15F

104892AE
4x6 trumpet flare kit; FGS-MTRM-B FGSB-MTRM-B

used on 4x12 downspouts
4x12 to 4x4 downspout converter; – FGS-HDSI-F/D FGS-HDSI-F/D
converts downspout opening to accept
4x4 slotted duct
4x12 to 2x2 downspout converter – FGS-HDSI-F/C FGS-HDSI-F/C
*An additional junction is needed if drop is to fitting or straight section. This 4x6 junction must be a junction type
FGS-MFAW-B, FGSB-MFAW-B.
•

10/10
www.adc.com • +1-952-938-8080 • 1-800-366-3891 52

4x12 System
Downspout Cover for 4x12 Downspout Trumpet Flare

(FGS-MDSP-F) (FGS-SDSP-F) (FGS-MTRM-F)
Downspout Island T Island T with Recessed

with Rear T (FGS-ISLAND-F) Dividing Spool
(FGS-MDRT-F) (FGS-ISLAND3-F shown with
12" Junction, 90º Down Elbow
and Trumpet Flare)
4x12 System
104892AE
4x6 Dual 2" 4x6 Trumpet Flare Kit 4x12 to 4x4

Flex Tube Attachment (FGS-MTRM-B shown alone and Downspout Converter
(FGS-KT03-B) attached to 4x12 Downspout) (FGS-HDSI-F/D)
•
10/10
The FGS-HSDI-F/D attached to both the 4x12 downspout and

the 4x4 slotted duct without the use of hardware
www.adc.com • +1-952-938-8080 • 1-800-366-3891 53

4x12 System
Straight Section – 4" H x 12" W
The unique nine-channel design of the 4x12 FiberGuide® straight section provides unmatched strength
and allows the attachment of support structure without the need to cut or drill holes within the
raceway. This ensures that the patch cords will not come in contact with any screw heads or bolts,
an important consideration in 4x4, 4x6, and 4x12 systems where higher cable counts apply increased
pressure on the patch cords at the bottom of the raceway.
The 4x12 system covers feature a snap-on design. This allows the cover to be used in environments with
limited headroom. Two 3-foot cover sections come with each order, making it easy for one person to
remove the covers. Each cover kit includes a tether kit. The straight section covers are designed to be
placed over the 4x12 downspouts, speeding installation time by reducing the number of measurements
and cuts that need to be made.
Horizontal Straight Section Horizontal Straight Section Cover Expandable Straight Section
(FGS-MSHS-F) (FGS-MSSC-F includes two 3' Lengths (FGS-MVAR-F)
and Tethering Hardware)
4x12 System
104892AE
12" Hinged Cover for Horizontal Straight Section Cover in Straight Section Cover
Straight Section Tethered Position Attached to Straight Section
(FGS-MSNC-F)
Catalog Number
4x12 straight section
•
Horizontal straight section; 6' long, cover sold seperately FGS-MSHS-F FGSB-MSHS-F
10/10
Expandable straight section FGS-MVAR-F FGSB-MVAR-F

Slack storage straight section FGS-MSHS-STOR-F FGSB-MSHS-STOR-F
4x12 accessories
Hinged cover kit for horizontal straight section; FGS-MSNC-F FGSB-MSNC-F
includes five mounting hinges and three clips
Snap-on cover kit* for horizontal straight section; FGS-MSSC-F FGSB-MSSC-F
includes 3' covers, optional tethering kit
Kit - 10 black capture clips and 10 hinges FGS-DHHC FGSB-DHHC
*See drawings on page 60 for more detail on how capture clips and hinges are used.
www.adc.com • +1-952-938-8080 • 1-800-366-3891 54

4x12 System
Snap-Fit™ Junction – 4" H x 12" W
The new Snap-Fit™ junction is available for the 12-inch FiberGuide®

system. The Snap-Fit junction is a completely tool-less junction.
No additional tools are required for installation or removal. The
Snap-Fit junction exhibits superior holding force and accommodates
support brackets.
4x12 Snap-Fit Junction

(FGS-MFAW-F)
Catalog Number
4x12 Snap-Fit junction
™
FGS-MFAW-F FGSB-MFAW-F
4x12 System
104892AE
•
10/10
www.adc.com • +1-952-938-8080 • 1-800-366-3891 55

4x12 System
Part Drawings
305 mm 533 mm 305 mm 533 mm
(12") (21") (12") (21")
347 mm
(13.6") Top
533 mm
440 mm (21") Top
(17.3")
112 mm
112 mm (4.4")
(4.4") 347 mm
(13.7") 347 mm
(13.7")

(FGS-MHRT-F) (FGS-MHXP-F)
305 mm 112 mm
(12") 305 mm
(4.4") (12")
347 mm
(13.7") 112 mm
(4.4")
440 mm
(17.3") 208 mm
(8.2")
347 mm
440 mm 208 mm
(17.3") (13.7")
(8.2")
Top Side
90° Horizontal Elbow 90° Down Elbow

(FGS-MH9E-F) (FGS-MD9E-F)
112 mm 305 mm
305 mm
(4.4") (12") (12")
367 mm
(14.4") 340 mm
(13.4") 53.6 mm
112 mm (2.11")
(4.42") 135
4x12 System
166 mm
(6.55") 25 mm
(1")
104892AE
347 mm
(13.7") 347 mm 210 mm
(13.7")
398 mm (8.27")
(15.7")
Top Side
45° Horizontal Elbow 45° Up Elbow

(FGS-MH4E-F) (FGS-MU4E-F)
381 mm
(15")
305 mm
•
(12")
347 mm 112 mm
(13.7") (4.4") 347 mm
10/10
(13.7") Top
163 mm 112 mm 440 mm

(4.42") (17.3")
(6.4")
152 mm
305 mm (6")
Side
(12") 195 mm
(7.7")
45° Down Elbow Horizontal T with (one) 6" Exit

(FGS-MD4E-F) (FGS-MHRT-F/B)
www.adc.com • +1-952-938-8080 • 1-800-366-3891 56

4x12 System
Part Drawings
380 mm
(15")
305 mm 152 mm
(12") (6")
195 mm 112 mm 305 mm
(7.7") (4.4") (12")
533 mm
(21") Top Top
465 mm
347 mm (18.3")
(13.7") 112 mm
(4.4")
347 mm 152 mm
(13.7")
279 mm (6")
(11")
195 mm
(7.7")
Horizontal Cross with (two) 6" Exits 4x12 to 4x6 Dual Adapter
(FGS-MHXP-F/B) (FGS-MDSA-F2B)
254 mm
305 mm (10")
(12")
112 mm
(4.4")
347 mm
Top (13.7") 343 mm
(13.5")
113 mm
195 mm (4.4")
152 mm (7.7")
(6")
4x12 to 4x6 Adapter End Cap

(FGS-MDSA-FB) (FGS-HMEC-F)
548 mm
457 mm (21.6")
(18")
159 mm
4x12 System
356 mm (6.25")
(14")
Retracted Straight Section
533 mm
104892AE
(21")
305 mm
(12")
559 mm
(22")
Expandable Straight Section 508 mm
(FGS-MVAR-F) (20")
12" Cut-in T
(FGS-MHIS-F)
•
381 mm 63.5 mm
10/10
(2.5")
(15") 305 mm
(12")
112 mm
Top (4.42") 31.32 mm 88.9 mm
347 mm
(12.3") (3.5") 50.8 mm
(13.7")
63.5 mm (2")
(2.5")
211 mm
152 mm (8.3") 414 mm
(6") (16.3")
Downspout Trumpet Flare

(FGS-MDSP-F) (FGS-MTRM-F)
www.adc.com • +1-952-938-8080 • 1-800-366-3891 57

4x12 System
Part Drawings
318 mm
(12.5")
490 mm
(19.3")
267 mm
439 mm (10.5")
(17.3")
203 mm 160 mm
173 mm 102 mm (8") (6.3")
(6.8") (4") 4 mm
267 mm (.2")
(10.5")
Island T with Recessed Dividing Spool Island T

(FGS-ISLAND3-F) (FGS-ISLAND-F)
89 mm
(3.5") 279 mm
(11")
94 mm
102 mm (3.7")
(4")
38 mm 533 mm
145 mm (1.5") (21")
(5.7") 127 mm
272 mm 73.7 mm (5")
(10.7") (2.9")
254 mm
Straight Section (10") 439 mm
(17.3")
127 mm
(FGS-MSHS-F) (5")
366 mm
(14.4")
422 mm
4x12 System
(16.6")
25 mm 279 mm
(1") (11")
93.2 mm End
104892AE
Side
(3.7")
Straight Section
(Not Included)
Hinged Cover for Horizontal Straight Section Downspout with Rear T
(FGS-MSNC-F) (FGS-MDRT-F)
108 mm
(4.25”)
•
10/10
382 mm
(15”)
133 mm 305 mm
(5.2”) 89 mm (3.5")
(12") diameter 108 mm
(4.25")
205 mm
(12”)
Snap-Fit Junction Slack Storage Straight Section

(FGS-MFAW-F) (FGS-MSHS-STOR-F)
www.adc.com • +1-952-938-8080 • 1-800-366-3891 58

4x24 System
Fittings................................................................................. 60
Downspouts......................................................................... 61
Cover Kits............................................................................. 62
Parts Drawings................................................................ 63-64
4x24 System
www.adc.com • +1-952-938-8080 • 1-800-366-3891 59

4x24 System
End Cap Horizontal Cross with Horizontal Cross

(FGS-HMEC-H) Dual 12" Exits (FGS-MHXP-H)
(FGS-MHXP-F/H)
45° Horizontal Elbow Horizontal T 12" Cut-in T

(FGS-MH4E-H) with Single 12" Exit (FGS-MHIS-F/H)
(FGS-MHRT-H/F)
4x24 to 4x12 Adapter 45° Up Elbow

45° Down Elbow (FGS-MU4E-H)
(FGS-MD4E-H) (FGS-MDSA-HF)
104892AE
Catalog Number
4x24 System

4x24 fittings
45° horizontal ebow FGS-MH4E-H FGSB-MH4E-H
Horizontal T with single 12" exit FGS-MHRT-H/F FGSB-MHRT-H/F
Horizontal T with three 24" exits FGS-MHRT-H FGSB-MHRT-H
•
Horizontal cross FGS-MHXP-H FGSB-MHXP-H

Horizontal cross with dual 12" exits FGS-MHXP-F/H FGSB-MHXP-F/H
10/10
45° up elbow FGS-MU4E-H FGSB-MU4E-H

45° down elbow FGS-MD4E-H FGSB-MD4E-H
4x24 conversions
12" cut-in T for 4x24* FGS-MHIS-F/H FGSB-MHIS-F/H
6" cut-in T for 4x24* FGS-MHIS-B/H FGSB-MHIS-B/H
4" cut-in T for 4x24* FGS-MHIS-A/H FGSB-MHIS-A/H
4x24 to 4x12 adapter FGS-MDSA-HF FGSB-MDSA-HF
4x24 end cap FGS-HMEC-H FGS-HMEC-H
*Designed exclusively for the 4x24" system.
www.adc.com • +1-952-938-8080 • 1-800-366-3891 60

4x24 System
Downspouts – 4" H x 24" W
4x24 downspouts and attachments feed fiber from overhead straight sections into
fiber optic equipment below.
Island T with Single 12" Exit Trumpet Flare

(FGS-ISLAND-H/F) (FGS-MTRM-H)
Catalog Number
Island T with single 12" exit FGS-ISLAND-H/F FGSB-ISLAND-H/F
Trumpet flare FGS-MTRM-H FGS-MTRM-H

104892AE
4x24 System
•
10/10
www.adc.com • +1-952-938-8080 • 1-800-366-3891 61

4x24 System
Straight Section, Snap-Fit™ Junctions and covers – 4" H x 24" W
Straight Section
The unique double wall channel design of the 4x24 straight
section provides exceptional strength and durability for high
fiber count applications and allows the standard system to be
attached to the support structure without the need to cut or
drill any holes within the trough. The six channel design ensures
that the patch cords will not come in contact with any screw
heads or bolts, an important consideration in 4x24 systems
where higher cable counts apply increased pressure on patch
cords at the bottom of the trough. Straight Section
(FGS-MSHS-H)
Catalog Number
4x24 straight section; horizontal straight section, 6' long FGS-MSHS-H FGSB-MSHS-H
Snap-Fit Junction
The Snap-Fit™ Junction assembly is available for the 24-inch
FiberGuide® System. The Snap-Fit junction is a completely tool-
less junction. No additional tools are required for installation
or removal. The junction exhibits superior holding force and
accommodates support brackets. A warning label is included
with each junction kit.
Snap-Fit Junction
(FGS-MFAW-H)
Catalog Number
104892AE

4x24 System
4x24 Snap-Fit™ junction FGS-MFAW-H FGSB-MFAW-H

Cover Kits
•
Description Catalog Number
10/10
Cover for 4"x24"x6' straight section - FGS-MSHS-H FGS-FSFC-H

Cover for 4"x24"horizontal tee with single 12" Exit - FGS-MHRT-H/F FGS-FHRT-H/F
Cover for 4"x24"horizontal cross with dual 12" Exits - FGS-MHXP-F/H FGS-FHXP-F/H
Cover for 4"x24"horizontal cross - FGS-MHXP-H FGS-FHXP-H
Cover for 4"x24" 45° horizontal elbow - FGS-MH4E-H FGS-FH4E-H
Cover for 4"x24"horizontal tee - FGS-MHRT-H FGS-FHRT-H
Cover for 4"x24" 4° down elbow - FGS-MD4E-H FGS-FD4E-H
Cover for 4"x24" to 4"x12" reducer - FGS-MDSA-HF FGS-FDSA-HF
www.adc.com • +1-952-938-8080 • 1-800-366-3891 62

4x24 System
Part Drawings
584 mm 108 mm
(23") 697 mm
(4.25")
(27.5")
102 mm
(4")
89 mm 94 mm
(3.5") (3.7") 144 mm
(5.7")
576.6 mm 610 mm 127 mm

(22.7") (24") (5")
Straight Section Snap-Fit Junction

(FGS-MSHS-H) (FGS-MFAW-H)
533.1 mm
4 x 24 Straight Section 4x24 Snap-Fit Junction (20.99")
FGS-MSHS-H
FGS-MFAW-H
610 mm
610 mm (24")
(24")
120 mm
305 mm (4.7")
581 mm (12")
(22.9") 745 mm
(29.3")
652 mm
120 mm (25.7")
(4.7")
652 mm
701 mm (25.7") 347 mm
(27.6") (13.7")
4x24 45° Horizontal

45°Elbow
Horizontal Elbow Horizontal T with Single 12" Exit
FGS-MH4E-H (FGS-MH4E-H) (FGS-MH4E-H)
4x24 Horizontal T with Single 12" Exit
MGS-MHRT-H/F
533 mm
(21")
610 mm
652 mm (24")
(25.7")
610 mm 120 mm
(24") 120 mm (4.7")
305 mm
(4.7") (12")
838 mm
652 mm (33")
(25.7")
838 mm
(33")
104892AE
4x24 System
838 mm 347 mm
(33") (13.7")
Horizontal Cross Horizontal Cross

(FGS-MHXP-H) with Dual 12" Exits
4x24 Horizontal Cross with(FGS-MHXP-F/H)
Dual 12" Exits
FGS-MHXP-F/H
4x24 Horizontal Cross
•
FGS-MHXP-H
10/10
795 mm
(31.3")
470 mm
(18.5")
419 mm
(16.5")
160 mm
645 mm (6.3")
(25.4") 203 mm
(8") 4 mm
114 mm (.2")
(4.5")
End Cap Island T with Single 12" Exit 4x24 to 4x12 Adapter
(FGS-HMEC-H) (FGS-ISLAND-H/F) (FGS-MDSA-HF)
4x24 End Cap 4x24 x 4x12 Adapter
FGS-HMEC-H FGS-MDSA-HF
4x24 Island T with Single 12" Exit
FGS-ISLAND-H/F
www.adc.com • +1-952-938-8080 • 1-800-366-3891 63

4x24 System
Part Drawings
114 mm 160 mm
(4.5") (6.3")
736 mm
(29") 647 mm
(25.5")
610 mm
(24")
134.3 mm 78 mm
(5.3") (3.1")
610 mm
(24")
Trumpet Flare 4x24 45° Up Elbow 45° Up Elbow

4x24 Trumpet Kit
(FGS-MTRM-H) FGS-MU4E-H (FGS-MU4E-H)
FGS-MTRM-H
345 mm
(13.6")
128 mm
(5")
330 mm
(13")
102 mm
(4")
117 mm 4" Cut-in T
(4.6")
Adapter Bracket
610 mm 178 mm
(24") (7")
305 mm
SIDE (12")
45° Down Elbow 4" Cut-in T

(FGS-MD4E-H) designed exclusively for the 4x24 System
4x4 Cut-in T for 4x24 FiberGuide
(FGS-MHIS-A/H)
4x24 45° Down Elbow FGS-MHIS-A/H
FGS-MD4E-H
396 mm 548 mm
(15.6") (21.6")
128 mm
128 mm (5")
(5")
381 mm 533 mm
(21")
104892AE
(15")
152 mm 305 mm
(6") (12")
4x24 System
6" Cut-in T Adapter Bracket 12" Cut-in T

Adapter Bracket
356 mm 508 mm
(14") (20")
4x6 Cut-in T for 4x24 FiberGuide

6" Cut-in T 4x12 Cut-in T for 4x24 FiberGuide
12" Cut-in T
FGS-MHIS-B/H FGS-MHIS-F/H
designed exclusively for the 4x24 System designed exclusively for the 4x24 System
(FGS-MHIS-B/H) (FGS-MHIS-F/H)
•
10/10
www.adc.com • +1-952-938-8080 • 1-800-366-3891 64

4-Inch Express Exit................................................................ 66

2-Inch Express Exit................................................................ 67
Low-Profile Express Exit........................................................ 67
Attachments......................................................................... 67
Parts Drawings..................................................................... 68
www.adc.com • +1-952-938-8080 • 1-800-366-3891 65

For 4x4, 4x6, 4x12, and 4x24 Systems
ADC's patented* Express Exit™ family accommodates various

raceway environments and applications. By simply securing
an Express Exit to the sidewall of any 4x4, 4x6, 4x12, or 4x24
FiberGuide® straight section, jumpers can be permanently or
temporarily routed to fiber optic terminal (FOT) equipment below.
No cutting of the FiberGuide system is required. Positioning a
drop with a member of the Express Exit family greatly simplifies
installation, protects the integrity of fibers already present in the
raceway, and increases overall flexibility of the raceway system. All
Express Exits guarantee 2-inch bend radius protection. Express Exit Family
Express Height Above Exit 3 mm Patch Cord 2 mm Patch Cord Hinged Exit Fin
Exit Style Sidewall Opening Capacity Capacity Rear Cover Inserts
2-Inch 4" 2" x 2"1 150 350 No No

Express Exit
Low-Profile 2" 2" x 2"1 150 350 No No
Express Exit
4-Inch 4" 4" x 4"2 300 700 Yes Yes
Express Exit
Accepts all standard 2x2" attachments.

1
Accepts all standard 4x4" attachments.

2
4-Inch Express Exit™

The 4-Inch Express Exit is designed to distribute and manage
medium cable counts to FOT or ODF equipment. It features
a 4-inch by 4-inch exit opening to accept all standard 4x4
104892AE
downspout attachments and includes insertable exit fins and

removable rear cable guides for additional cable management.
See page 90 for 4-Inch Express Exit downspout attachments.
4-Inch Express Exit

Express Exit Family
Catalog Number
•

4-inch Express Exit ™
10/10
Express Exit; base, base cover, mounting hardware, support FGS-MEXP-E-A/B/F FGSB-MEXP-E-A/B/F
bracket, and exit inserts included
4-inch accessories
Express Exit rear hinged cover kit; FGS-MEXC-E-A/B/F FGSB-MEXC-E-A/B/F
one 4x4, 4x6, 4x12 rear hinged cover
Express Exit rear hinged cover for 4x4 raceway FGS-MEXC-E-A FGSB-MEXC-E-A
Express Exit rear hinged cover for 4x6 raceway FGS-MEXC-E-B FGSB-MEXC-E-B
Express Exit rear hinged cover for 4x12 raceway FGS-MEXC-E-F FGSB-MEXC-E-F
*Other patents pending.
www.adc.com • +1-952-938-8080 • 1-800-366-3891 66

For 4x4, 4x6, 4x12, and 4x24 Systems
2-Inch Express Exit™

The 2-Inch Express Exit, ADC's initial offering in the Express Exit
product family, accommodates up to 350, 2 mm patch cords. The
patch cords are routed from a 4x4, 4x6, 4x12 or 4x24 straight
section to FOT equipment below the raceway.
2-Inch Express Exit

Catalog Number
2-Inch Express Exit ; base, base cover, mounting hardware
™
FGS-MEXP-A/B/F FGSB-MEXP-A/B/F
and support bracket included
Low-Profile Express Exit™

Designed for low-ceiling or height-restricted environments, the
Low-Profile Express Exit features a front-removable cover and
extends only 2 inches above the FiberGuide® straight section
sidewall. It also includes removable rear cable guides for additional
cable management.
Low-Profile Express Exit

Catalog Number
Low-Profile Express Exit ; base, base cover, mounting
™
FGS-MEXP-LP-A/B/F FGSB-MEXP-LP-A/B/F
104892AE
hardware and support bracket included
Attachments for 2-Inch Express Exit™ and Low-Profile Express Exit™

Catalog Number
•
2x2 trumpet flare; junction included FGS-MTRM-C FGSB-MTRM-C

10/10
Single 2" flex tube attachment; 2" flex tube and a 2x2 junction to attach to Express Exit unit included
5' length FGS-MEX1-C-5F FGSB-MEX1-C-5F
Dual 7/8" flex tube attachment;
two lengths of 7/8" flex tube and a 2" junction to attach to Express Exit unit included
(2) 5' lengths FGS-KT03-C FGSB-KT03-C
(2) 10' lengths FGS-KT03-C-10F FGSB-KT03-C-10F
(3) 15' lengths FGS-KT03-C-15F FGSB-KT03-C-15F
www.adc.com • +1-952-938-8080 • 1-800-366-3891 67

Express Exit™
Part Drawings
Express Exit 2x4 406 mm

(16")
103 mm 196 mm
(4.1") (7.7")
Bracket, 200 mm
Express Exit 2x4 (7.9")
4-Inch Express Exit

(FGS-MEXP-E-A/B/F shown attached to 4x4 straight section)
51 mm
(2") Express Exit
254 mm
(10")
95 mm
(3.75") 125 mm
(4.9")
Bracket,
Express Exit
147 mm
(5.8")
2-Inch Express Exit

(FGS-MEXP-A/B/F; fits 4x4, 4x6 and 4x12 systems; shown attached to 4x6 straight section)
Low Profile Express Exit 260 mm

(10.25")
104892AE
51 mm
(2")
132 mm
(5.2")
130 mm
Express Exit Family
(5.1")
Low-Profile Express Exit

•
(FGS-MEXP-LP-A/B/F; fits 4x4, 4x6 and 4x12 systems; shown attached to 4x4 straight section)
10/10
133 mm
(5.2")
268 mm
(10.6")
131 mm
47 mm (5.16")
(1.9")
Low-Profile Express Exit Designed Exclusively for 2x6 System

(FGS-MEXP-LP-G shown attached to 2x6 straight section)
www.adc.com • +1-952-938-8080 • 1-800-366-3891 68

2" and 4" Solid and Slotted Duct Kits and Components..... 70
2"x 2" Accessories............................................................... 72

4"x 4" and 4"x 2" Accessories............................................ 73
www.adc.com • +1-952-938-8080 • 1-800-366-3891 69

Vertical Solid and Slotted Duct Kits Now with Hinged Covers
2x2 Solid Vertical Duct Kit 2x4 Solid Vertical Duct Kit 4x4 Slotted Vertical Duct Kit 90° Inside Elbow
(FGS-KTW1-JN) (FGS-KTW2-RN) (FGS-KTW2-J) (FGS-V9E44)
(cover closed) (cover open) Shown with cover removed

4-Inch Vertical to 2-Inch Exit Trumpet 4-Inch Exit Trumpet 4x4 Modified
2x2 Trumpet Fitting (FGS-VQE22) (FGS-VQE44) Trumpet Flare Kit
(FGS-TRMP42) (FGS-MTRM-D)
Applications
104892AE
2x2 Slotted Duct 4x4 Slotted Duct 4x4 Slotted Duct 2x2 Slotted Duct
•
with 2-Inch Exit Trumpet with 4-Inch Exit Trumpet with Entrance Trumpet with 2-Inch Exit Trumpet
(FGS-KTW1-JA with (FGS-KTW2-K with Flare at top and 4-Inch in horizontal application
10/10
FGS-VQE22 attached) FGS-VQE44 attached) to 2x2 Exit Trumpet - can be attached to the
(FGS-KTW2-K with 4-Inch to 2x2 Exit Trumpet
FGS-MTRM-D and (FGS-KTW1-JA with
FGS-TRMP42 attached) FGS-VQE22 attached)
www.adc.com • +1-952-938-8080 • 1-800-366-3891 70

2" and 4" Vertical Solid and Slotted Duct Kits and Components
Catalog Number
Description Yellow Black
2x1 System (1" wide x 2" deep)
2x1, vertical slotted duct kit (4" slot spacing), pop-off covers FGS-KTW1-E FGSB-KTW1-E
2x1, vertical solid duct kit, pop-off covers FGS-KTW4-E FGSB-KTW4-E
2x2 to 2x1 conversion piece FGS-ACC063 FGSB-ACC063
(order when converting from 2x2 to 2x1 system)
2X2 System (2" wide x 2" deep)

2x2, 6' vertical duct kit*, slotted (1.5" slot spacing) hinged cover FGS-KTW1-JA FGSB-KTW1-JA
2x2, 6' vertical duct kit*, slotted (4" slot spacing) hinged cover FGS-KTW1-JB FGSB-KTW1-JB
2x2, 6' vertical duct kit*, solid, hinged cover FGS-KTW1-JN FGSB-KTW1-JN
2x4 system (2" wide x 4" deep)

2x4, 6' vertical duct kit*, slotted (2" slot spacing) hinged cover FGS-KTW2-R FGSB-KTW2-R
2x4, 6' vertical duct kit*, solid, hinged cover FGS-KTW2-RN FGSB-KTW2-RN
4x4, 6' vertical duct kit*, slotted (2" slot spacing) hinged cover FGS-KTW2-K FGSB-KTW2-K
4x4, 6' vertical duct kit*, slotted (4" slot spacing) hinged cover FGS-KTW2-J FGSB-KTW2-J
4x4, 6' vertical duct kit*, solid, hinged cover FGS-KTW2-JN FGSB-KTW2-JN
4x2, 6' vertical duct kit*, slotted (1.5" slot spacing) hinged cover FGS-KTW2-T FGSB-KTW2-T
4x2, 6' vertical duct kit*, solid, hinged cover FGS-KTW2-TN FGSB-KTW2-TN
Trumpets and elbows
4" deep vertical to 2x2 trumpet to horizontal fitting FGS-TRMP42 FGSB-TRMP42
104892AE
4" deep vertical to 4x4 trumpet to horizontal fitting FGS-TRMP44 FGSB-TRMP44

4" exit to horizontal trumpet for vertical channel, 1" bend radius FGS-VQE44 FGS-VQE44
2" exit to horizontal trumpet for vertical channel, 1" bend radius FGS-VQE22 FGS-VQE22
2x4 entrance trumpet flare kit FGS-MTRM-DS FGSB-MTRM-DS
4x4 entrance trumpet flare kit FGS-MTRM-D FGSB-MTRM-D
4" deep 90º inside elbow FGS-V9E44 FGSB-V9E44
Components
•
2x2 vertical slotted duct (1.5" slot spacing); 6' Long FGS-MSHS-CB FGSB-MSHS-CB
10/10
Hinged cover for 2x2 duct; 6' long FGS-MSHC-J FGSB-MSHC-J

2x4 slotted duct, 2" slot spacing FGS-MSHS-K FGSB-MSHS-K
2x4 solid duct, vertical FGS-MSHS-KN FGSB-MSHS-KN
4x4 slotted duct, 2" slot spacing FGS-MSHS-KT FGSB-MSHS-KT
4" cover - hinged FGS-MSHC-K FGSB-MSHC-K
4x4 slotted duct, 4" slot spacing FGS-MSHS-KF FGSB-MSHS-KF
4x4 solid duct, vertical FGS-MSHS-KS FGSB-MSHS-KS
* Universal mounting brackets included in kit.
www.adc.com • +1-952-938-8080 • 1-800-366-3891 71

2"x 2" Accessories
2"x 2" Vertical Duct Universal

Mounting Brackets
(FGS-HWMB-C)
Catalog Number
Components
2x2 vertical slotted duct universal mounting bracket; FGS-HWMB-C FGS-HWMB-C
kit of 5 – typically five brackets used for every 6' section
of 2x2 vertical duct

2x2 adapter junction kit; used to join new 2x2 Vertical duct FGS-MJWRM-C FGSB-MJWRM-C
with hinged cover to standard 2x2 FiberGuide® profile
104892AE
•
10/10
www.adc.com • +1-952-938-8080 • 1-800-366-3891 72

4"x 4" and 4"x 2" Accessories
4"x 4" Vertical Duct

Mounting Bracket
(FGS-HWMB-D)
Catalog Number
4x4 vertical slotted duct mounting bracket; FGS-HWMB-D FGS-HWMB-D

typically three brackets used for every 6' section of 4x4
vertical duct
4x2 vertical slotted duct mounting bracket; kit of 10 FGS-HKW2-E FGS-HKW2-E
4x2 vertical slotted duct cap FGS-HMEC-E FGS-HMEC-E
4x4 adapter junction kit; used to join new 4x4 vertical duct FGS-MJWR-D FGSB-MJWR-D
with hinged cover to standard 4x4 FiberGuide® profile
104892AE
•
10/10
www.adc.com • +1-952-938-8080 • 1-800-366-3891 73

RiserGuide On-Demand
Cable Management
Introduction.......................................................................... 76
Installation and Removal...................................................... 77
RiserGuide On-Demand Cable Management

Specifications....................................................................... 78
Ordering Information........................................................... 79
www.adc.com • +1-952-938-8080 • 1-800-366-3891 75

Introduction
Because cable management requirements change

with network requirements, the ADC FiberGuide™
product family now includes a riser guidance
system, designed to provide cable management
where you need it, when you need it.
RiserGuide is modular and easy to both install and
remove, allowing for flexible cable management
and full network optimization.
Features
• Multiple standard width risers
• Multiple standard width risers
• Various components that can be
installed anywhere on the riser including
storage spools, radius limiters and cable

guides
• Mountable within and between racks
and in cabinets
• Half and full slack storage spools
available
• Breakout cable slack storage
• Half and full slack storage spools
available
• Breakout cable slack storage
Benefits:
104892AE
• Provides flexible, “on demand” cable

management
• Manages patch cords off active
equipment up to FiberGuide™
• Protects proper bend radius
• Easy to configure with simple, Snap-
Fit™, tool-free installation
•
• Designed to meet GR-63 requirements

• Supported by ADC’s cable management
10/10
expertise
• Provides a cable management solution
that extends beyond the “out of
the box” solutions that are currently
available
www.adc.com • +1-952-938-8080 • 1-800-366-3891 76

Installation and Removal, Specifications
Installation and Removal

Installation Removal
Specifications

Cable Guide Bracket 10.77 cm
4.24" 10.77 cm
9.45 cm 14.07 cm
3.72" 4.24" 5.54"
7.62 cm 13.77 cm
3.00" 9.45 cm 5.42" 14.07 cm
3.72" 5.54"
7.62 cm 13.77 cm
3.00" 5.42"
7.57 cm 5.08 cm
2.98" 2.02"
2.67 cm
1.05"
RGS-VC002-B RGS-VC001-B
7.57 cm 5.08 cm
2.98" 2.02"
2.67 cm
1.05"
RGS-VC003-B
Edge Protectors
7.62 cm
104892AE
13.08 cm
3.00" 5.15"
12.78 cm
5.03"
7.57 cm 7.57 cm
2.98" 2.27"
2.87 cm
RGS-RC006-B RGS-RC005-B 7.95 cm
1.13"
•
3.13"
10/10
1.5 inch Bend Radius Spools
RGS-SC003-B
RGS-SC002-B
11.43 cm 13.00 cm
4.50" 5.12"
7.62 cm 12.70 cm
3.00" 5.00"
5.72 cm
2.25"
7.57 cm 11.48 cm
2.98" 4.52"
5.72 cm
2.25"
RGS-SC001-B
RGS-SC001-B8
www.adc.com • +1-952-938-8080 • 1-800-366-3891 77

Specifications
Radius Limiting Edge Protectors
RGS-RC001-B RGS-RC002-B RGS-RC003-B RGS-RC004-B RGS-TC001-B

7.62 cm 7.62 cm 7.95 cm 7.95 cm

3.00" 3.00" 3.13" 3.13"
2.97 cm 2.97 cm 7.65 cm 7.65 cm
1.17" 1.17" 3.01" 3.01"
8.43 cm 8.43 cm 7.57 cm 7.57 cm

3.32" 3.32" 2.98" 2.98"
RGS-VC001-B RGS-RA001-B
(For Reference Only)
Vertical Riser Channel Pack Vertical Risers
25.4 cm 12.70 cm
Washer (12)
10.00" 5.00"
"L" Bracket (6)
Screw #12 X.250 (12)
104892AE
RGS-VRACC-CRKITP
213.36 cm 213.36 cm
•
7’ 7’
10/10
RGS-V0CX0A-P RGS-V0BX0A-P
www.adc.com • +1-952-938-8080 • 1-800-366-3891 78

Cable guide bracket RGS-VC001-B
1.5" Radius limiter for cable guide bracket RGS-RA001-B
Edge protectors
Edge protector for left-hand cable entry/exit RGS-RC005-B
Edge protector for right-hand cable entry/exit RGS-RC006-B

1.5” Bend radius spool
Full spool, 5" D RGS-SC001-B
Full spool, 8" D RGS-SC001-B8
Half spool – top, 5" D RGS-SC002-B

Half spool – bottom, 5" D RGS-SC003-B
Radius limiting edge protector
Fiber exit – right/down RGS-RC001-B
Fiber exit – left/down RGS-RC002-B
Fiber exit – right/up RGS-RC003-B
Fiber exit – left/up RGS-RC004-B
Vertical risers
7’ x 10” riser (putty) RGS-V0CX0A-P
7’ x 5” riser (putty) RGS-V0BX0A-P
8' x 10" riser (putty) RGS-V0CX0B-P
8' x 5" riser (putty) RGS-V0BX0B-P
104892AE
Channel rack installation kit for vertical riser

Putty RGS-VRACC-CRKITP
Black RGS-VRACC-CRKITB
Vertical Cable Guide
2.75" wide RGS-VC003-B
3.75" wide RGS-VC002-B
Cable Clamp RGS-TC001-B
•
10/10
www.adc.com • +1-952-938-8080 • 1-800-366-3891 79

2x2 System...................................................................... 82-83

Support Kit Drawings........................................................... 84
Support Kits
www.adc.com • +1-952-938-8080 • 1-800-366-3891 81

Direct Support Kits
Ladder Rack Support Kit Bay Top Support Short L Bay Top Support Long L
(FGS-HLR2-C shown alone and Bracket Kit Bracket Kit
attached to ladder rack) (FGS-BTBS-C) (FGS-BTBL-C)
Digital Cableway Under Floor Support Kit

Support Kit (FGS-HUFB-C shown alone and
(FGS-HDCB-C) attached to .62" round pipe)
2x2 direct support kits
Ladder rack support kit; for use with 3.5" (maximum) ladder rack FGS-HLR2-C
Bay top support short L bracket kit FGS-BTBS-C
Bay top support long L bracket kit FGS-BTBL-C
Digital cableway support kit FGS-HDCB-C
104892AE
Under floor support kit; can be secured to .62" to 1.2" round or square post FGS-HUFB-C
Note: R
ecommended spacing of direct support kits is every 2' to 3'.
Custom brackets are available, please contact ADC.
Support Kits
•
10/10
www.adc.com • +1-952-938-8080 • 1-800-366-3891 82

Aluminum Track Support Kit
Aluminum Track Support Kit New Threaded Rod Bracket Kit Existing Threaded Rod
(FGS-HASK-C) (FGS-HTR2-XX shown alone and Bracket Kit
attached to aluminum track support) (FGS-HTR2-2-5/8)
2x2 aluminum track support kit; 6' long, track connecting bar kit included – FGS-HASK-C
aluminum track is self-supporting for spans up to 6'
2x2 bracket kits; used to support aluminum track kits
New threaded rod bracket kit; 5/8" FGS-HTR2-5/8
New threaded rod bracket kit; 1/2" FGS-HTR2-1/2
Existing threaded rod bracket kit; 5/8" for up to two 2x2 FiberGuide® Systems FGS-HTR2-2-5/8
Track connecting bar kit; FGS-HAEJ-C
used to join two aluminum track kits; order only if extras are needed
104892AE
Support Kits
•
10/10
www.adc.com • +1-952-938-8080 • 1-800-366-3891 83

Support Kit Drawings
68 mm (2.7") Straight Section (Not Included)
Existing Support Bracket

Ladder Rack
57 mm
(2.3")
76 mm
(3")
End
6 mm (.25") 92 mm
51 mm Support
(2") Top (3.6")
Bracket 44 mm
84 mm (3.3") 136 or 392 mm (1.75")
(5.3 or 15.5")
Top End
Ladder Rack Support Kit Bay Top Support Short L Bracket Kit
(FGS-HLR2-C shown alone and attached (FGS-BTBS-C, FGS-BTBL-C)
to ladder rack)
38 mm Post
(1.5")
Top Support Bracket
Straight Section (Not Included)

76 mm
Support Bracket
(3")
Straight Section
115 mm (Not Included)
(4.5") 77 mm
Side (3")
Digital
230 to 256 mm Cableway
(9.1 to 10.1") (Not Included) End
Side
Digital Cableway Support Kit Under Floor Support Kit

(FGS-HDCB-C) (FGS-HUFB-C shown attached to
.62"x 2" round pipe)
104892AE
Threaded Rod (Not Included)

Aluminum
Extrusion
Straight Section
Aluminum (Not Included)
Extrusion 73 mm
Connector Bar (2.9")
Support Kits
Support Bracket
Lock Washer
Connector Bar
Cap Screw
Lock Washer End 60 mm
•
Side
(2.4")
End-to-End Cap Screw
Assembly Method Aluminum Extrusion
10/10
(Not Included)
Aluminum Track Support Kit New Threaded Rod Bracket Kit

(FGS-HASK-C) (FGS-HTR2 shown attached to
aluminum track support)
www.adc.com • +1-952-938-8080 • 1-800-366-3891 84

2x6, 4x4, 4x6 Systems.......................................................... 86

Support Kit Drawings...................................................... 87-88
Support Kits
www.adc.com • +1-952-938-8080 • 1-800-366-3891 85

Ladder Rack Cantilever L Bay Support Bracket Kit New Threaded Rod Bracket kit
Support Bracket Kit (FGS-HLBK shown alone and (FGS-HNTR-XX shown alone and
(FGS-HDLB-4) attached to 4x4 FiberGuide) attached to threaded rod)
Existing Threaded Rod Modified New Threaded Rod Bracket Kit Top Support Low Profile
Bracket Kit (FGS-HNTR-5/8-A shown alone C-bracket Kit
(FGS-HETR-XX shown alone and and attached to threaded rod) (FGS-HNTS-XX-LP)
attached to threaded rod)
Top Support C-Bracket Kit Modified Existing Threaded Rod Bracket Kit Center Support Bracket Kit
(FGS-HNTS-XX) (FGS-HETR-5/8-A shown alone and (FGS-HTUB-XX)
104892AE
Support Kits
2x6, 4x4, 4x6 system support kits

Ladder rack cantilever support bracket kit FGS-HDLB-3
L bay support bracket kit FGS-HLBK
•
New threaded rod bracket kit; (XX = size: 1/2", 5/8", 12 mm, 14 mm, 16 mm, 18 mm) FGS-HNTR-XX
10/10
Existing threaded rod bracket kit; (XX = size: 1/2", 5/8", 12 mm, 14 mm, 16 mm) FGS-HETR-XX
Modified new threaded rod bracket kit; 5/8" FGS-HNTR-5/8-A
Top support low-profile C-bracket kit; (XX = size: 1/2", 5/8", 12 mm, 14 mm, 16 mm) FGS-HNTS-XX-LP
Top support C-bracket kit; (XX = size: 1/2", 5/8", 12 mm, 14 mm, 16 mm) FGS-HNTS-XX
Modified existing threaded rod bracket kit; 5/8" FGS-HETR-5/8-A
Center support bracket kit; (XX = size: 1/2", 5/8", 12 mm, 14 mm, 16 mm, 20 mm) FGS-HTUB-XX
Digital cableway bracket kit; 305 mm (12") FGS-HCBL-12
Digital cableway bracket kit; 381 mm (15") FGS-HCBL-15
Ladder rack center support bracket kit FGS-HNLR-AB
OMX frame center support bracket kit; 16 mm (.63") FGS-HOMX-16MM
Under floor support bracket kit FGS-HUFB-A
Custom brackets are available, please contact ADC.
www.adc.com • +1-952-938-8080 • 1-800-366-3891 86

2x6, 4x4, and 4x6 System Support Kits
156 mm (6.1") 156 mm

for 4x4 122 mm (6.1")
207 mm (4.8") for 4x4 122 mm Section A-A
1/2-13 OR 5/8-11 Existing (4.8")
Threaded Rod (8.14") Section A-A 207 mm
1/2-13 or 5/8-11 (8.14")
(Not Supplied) For 6x4 Threaded Rod for 6x4
A A A A Open-End Bracket
Closed-End Bracket
25 mm 173 mm 136 mm Threaded Rod Clip
(1") (6.8") 44 mm 173 mm 138 mm
(5.4") (1.7") (5.4")
(6.8")
Closed-End Bracket
24.9 mm 7.1 mm Threaded Rod Clip Open-End Bracket
(9.8") (.28") 7 mm
268 mm
51 mm (10.5") (.3")
(2")
50 mm 51 mm
381 mm 25.4 mm (2")
25.4 mm (1.5") (2")
(1") (1") 38 mm 25 mm
52 mm (1.5") (1")
47.2 mm
(1.86") 9.42 mm (2.1") 94 mm
(3.71") 52 mm 47 mm (3.7")
142 mm (2.1") 142 mm
(5.57") (1.9")
(5.6")
New Threaded Rod Bracket Kit Existing Threaded Rod Bracket Kit
(FGS-HNTR-XX shown alone and attached (FGS-HETR-XX shown alone and attached
to threaded rod) to threaded rod)
Existing 1/2-13 or
5/8-11 Threaded Rod 4" Fiber
Guide
Shown 122 mm
For (4.8")
48 mm Reference 10 mm
(1.9") (.4")
68 mm (2.7")
274 mm (10.8") 127 mm
7 mm (5")
Open-End Bracket (.3")
Threaded Rod Clip
61 mm
(2")
57 mm
50 mm (1.5")
(2") 85 mm 51 mm
(3.4") 132 mm (2")
104892AE
(5.2") 38 mm
52 mm 180 mm (1.5")
(2.1") (7.1")
Modified Existing Threaded Rod Bracket Kit Ladder Rack Center Support Bracket Kit
(FGS-HETR-XX-A shown alone and attached (FGS-HNLR-AB)
Support Kits
to threaded rod)
22 mm 38 mm
•
(.9") (1.5") 6 mm
(.25") 117 mm
10 mm (4.6")
10/10
(.4")
64 mm
7 mm (2.5")
(.3")
13 mm
(.5")
127 mm
64 mm (5")
45 mm (2.5")
(1.75")
16 mm
(.6") 360 mm
55 mm (14.2")
(2.2")
38.1 mm
OMX Frame Center Support Bracket Kit Under Floor Support Bracket Kit
(1.5")
(FGS-HOMX-16MM) (FGS-HUFB-A)
50.8 mm
(2")
88.9 mm
(3.5")
www.adc.com • +1-952-938-8080 • 1-800-366-3891 87

2x6, 4x4, and 4x6 System Support Kits
406 mm – 483 mm (16" – 19")

Equipment Rack 12 mm (4")
38 mm
(1.5")
51 mm
(2")
13 mm 3/8-16 122 mm
(.5") (4.8")
Cableway Shown
for Reference 130 mm
(5.1")
12-24 x 3/8 171 mm

Pan Head Screw (6.75") 406 mm – 483 mm (16" – 19")
Support Bracket Digital Cableway Bracket Kit

(FGS-HLBK shown alone and attached to 4" FiberGuide) (FGS-HCBL shown alone and attached
to 4" FiberGuide®)
5/8-11 Threaded Rod

Shown for Reference
117 mm
New Threaded (4.6")
Rod Bracket Kit
Shown for Reference PNT0
PNT0
63.5 mm 64 mm
39 mm (1.5") (2.5") (2.5")
Lock Washer (2)
80 mm
(3.2")
Unistrut Nut Kit Center Support Bracket

(FGS-HDGR) (FGS-HTUB)
Threaded Rod
104892AE
185 mm
(7.3") 305 mm
(12")
Support Kits
6" Trough THREADED ROD

(REF)
221 mm with Cover
(8.7")
Quick Knob Assembly
1/2" BOLT HOLES
Ladder Rack Cantilever Support Bracket Kit Top Support C-Bracket
•
(FGS-HDLB-4) (FGS-HNTS)
FOR WALL MOUNT 4" O
10/10
(REF
197 mm
(7.75") QUICK KNOB ASSE
203 mm
(8")
6" Trough
254 mm
203 mm (1")
(8")
Top Support Low-Profile C-Bracket

(FGS-HNTS-LP)
www.adc.com • +1-952-938-8080 • 1-800-366-3891 88

4x12 System......................................................................... 90
Support Kit Drawings........................................................... 91
Support Kits
www.adc.com • +1-952-938-8080 • 1-800-366-3891 89

Existing Ladder Rack Center Trapeze Bracket Kit Center Support Threaded
Support Bracket Kit (FGS-HNTP-F-XX) Rod Bracket Kit
(FGS-HETP-F-XX) (FGS-HTUB-F-XX shown alone

and attached to threaded rod)
Top Support Low-Profile Top Support Threaded Rod New Threaded Rod Bracket Kit
Threaded Rod Bracket Kit Bracket Kit (FGS-HNTR-F-XX)
(FGS-HNTS-F-XX-LP shown alone (FGS-HNTS-F-XX)
and attached to threaded rod)
104892AE
Existing Threaded Rod

Bracket Kit
(FGS-HETR-F-XX)
Support Kits
•
4x12 system support kits

10/10
New ladder rack center support bracket kit FGS-HNLR-F

Existing ladder rack center support bracket kit; FGS-HETP-F-XX
(XX = size: 1/2", 5/8", 12 mm, 14 mm, 16 mm)
Trapeze bracket kit; (XX = size: 1/2", 5/8", 12 mm, 14 mm, 16 mm) FGS-HNTP-F-XX
Center support threaded rod bracket kit; FGS-HTUB-F-XX
(XX = size: 1/2", 5/8", 12 mm, 14 mm, 16 mm, 20 mm)
Top support low-profile threaded rod C-bracket kit; FGS-HNTS-F-XX-LP
(XX = size: 1/2", 5/8", 12 mm, 14 mm, 16 mm)
Top support threaded rod C-bracket kit; (XX = size: 1/2", 5/8", 12 mm, 14 mm, 16 mm) FGS-HNTS-F-XX
New threaded rod bracket kit; (XX = size: 5/8", 14 mm, 16 mm, 18 mm) FGS-HNTR-F-XX
Existing threaded rod bracket kit; (XX = size: 5/8", 14 mm, 16 mm) FGS-HETR-F-XX
www.adc.com • +1-952-938-8080 • 1-800-366-3891 90

12" FiberGuide
51 mm
(2")
32 mm
419 mm (1.25") Split Nut
(16.5") Bracket Clip
Bottom Bracket
32 mm
(1.25")
Cantilever T-Bolt
Threaded Bracket
Rod Ref
419 mm
32 mm (16.5")
(1.25")
New Threaded Rod Bracket Kit Existing Threaded Rod Bracket Kit
(FGS-HNTR-F-XX shown alone and (FGS-HETR-F-XX)
216 mm 216 mm
(8.5") (8.5")
254 mm
(10") 152 mm
(6")
305 mm
(12") 203 mm
(8")
12" Trough 12" Trough
381 mm 381 mm
(15")
(15")
Top Support Threaded Rod C-Bracket Kit Top Support Low Profile Threaded Rod C-Bracket Kit
(FGS-HNTS-F-XX shown attached (FGS-HNTS-F-XX-LP shown attached
to 4x12 straight section) to 4x12 straight section)
12" FiberGuide
12" FiberGuide
115 mm
104892AE
115 mm (4.5") 10 mm
(4.5") (.4")
286 mm
(11.25")
63.5 mm
63.5 mm (2.5")
Lock Mounting T-Bolt Assembly (2.5")
Lock Mounting T-Bolt Assembly Washer Thread Cap
Nut
Support Kits
Washer Nut Thread Cap Rod 61 mm
Threaded
Threaded Rod 286 mm (2.4")
38 mm
286 mm (11.25")
(11.25") (1.5")
•
Center Support Threaded Rod Bracket Kit Ladder Rack Center

10/10
(FGS-HTUB-F-XX shown attached Support Bracket

to 4x12 straight section) (FGS-HNLR-F)
406 mm
(16")
51 mm
(2")
457 mm
(18")
Trapeze Bracket Kit

(FGS-HNTP-F)
www.adc.com • +1-952-938-8080 • 1-800-366-3891 91

4x24 System......................................................................... 94
Support Kits
www.adc.com • +1-952-938-8080 • 1-800-366-3891 93

Variable Fitting Support Locator

Variable Fitting Support Locater Kit –
Kit – Horizontal Elbow
Horizontal T with Single 12" Exit
(FGS-MH4E-H-VS)
(FGS-MHRT-H/F-VS)
Variable Support Bracket - Horiz. Elbow

(FGS-MH4E-H-VS) Variable Support Bracket - Horiz. T
(FGS-MHRT-H/F-VS)
Variable Fitting Support Variable Fitting Support Locater Kit –

Locater Kit – Horizontal Cross Horizontal Cross with Dual 12" Exits
(FGS-MHXP-H-VS) (FGS-MHXP-F/H-VS)
Variable Support Bracket - Horiz. Cross

Threaded Rod Ref (FGS-MHXP-F/H-VS)
Split Nut
12.7 mm Bracket
(.5")
Variable Support Bracket - Horiz. Cross Clip
(FGS-MHXP-H-VS)
Quick Knob
Existing Threaded Rod Trapeze Bracket
50.8 mm
50.8 mm (2")
(2")
736.6 mm 736.6 mm
(29") (29")
844.6 mm 793.8 mm
(33.25") (31.25")
Existing 5/8” Threaded Rod Trapeze Bracket Kit New 5/8” Threaded Rod Trapeze Bracket Kit
(FGS- HETP-H-5/8) (FGS-HNTP-H-5/8)
104892AE
Ordering Information New 5/8” Threaded Rod Trapeze Bracket Kit

(FGS-HNTP-H-5/8)
Description
Existing 5/8” Threaded Rod Trapeze Bracket Kit Catalog Number
(FGS- HETP-H-5/8)
Support Kits

Variable fitting support locater kit for;
Horizontal elbow FGS-MH4E-H-VS
•
Horizontal T with single 12" exit FGS-MHRT-H/F-VS

10/10
Horizontal cross FGS-MHXP-H-VS

Horizontal cross with dual 12" exits FGS-MHXP-F/H-VS
Threaded rod trapeze bracket kit for;
Existing; 5/8" FGS-HETP-H-5/8
New; 5/8" FGS-HNTP-H-5/8
www.adc.com • +1-952-938-8080 • 1-800-366-3891 94

Accessories
Support Kit Accessories........................................................ 96

System Accessories............................................................... 97
Accessories
www.adc.com • +1-952-938-8080 • 1-800-366-3891 95

Support Kit Accessories
2x2, 2x6, 4x4, 4x6, 4x12, 4x24 Support Kit Accessories
Threaded Rod Auxiliary Framing Kit Adjustable Angle

(FGS-HTHR) (FGS-HFCK) Support Brackets
(FGS-HASB)
Ladder Rack Bracket Kit Unistrut Nut Kit

FGS-HLDR shown alone and (FGS-HDGR)
attached to ladder rack
Threaded rod
5/8" - 11 x 12" FGS-HTHR-5/8-12
5/8" - 11 x 30" FGS-HTHR-5/8-30
5/8" - 11 x 72" FGS-HTHR-5/8-72
1/2" - 13 x 12" FGS-HTHR-1/2-12
104892AE
1/2" - 13 x 30" FGS-HTHR-1/2-30

1/2" - 13 x 72" FGS-HTHR-1/2-72
Threaded rod; FGS-HTHR-XX-NN
(XX = size: 12 mm, 14 mm, 16 mm) (NN = length: 30 cm, 75 cm, 180 cm)
Auxiliary framing kit
2x 9/16" x 3/16" for 5/8" rod FGS-HFCK-5/8
2x 9/16" x 3/16" for 1/2" rod FGS-HFCK-1/2
•
Adjustable angle support brackets with 5/8" threaded rod

Accessories
10/10
11 x 36" rod FGS-HASB-5/8-36

11 x 48" rod FGS-HASB-5/8-48
Adjustable angle support brackets with 1/2" threaded rod
13 x 36" rod FGS-HASB-1/2-36
13 x 48" rod FGS-HASB-1/2-48
Ladder rack bracket kit for radiused ladder racking FGS-HLDR-A
Ladder rack bracket kit; (XX = size: 1/2", 5/8", 12 mm, 14 mm, 16 mm) FGS-HLDR-XX
Unistrut nut kit; 5/8" FGS-HDGR
Frame mounting hardware kit; (XX = size: 1/2", 5/8", 12 mm, 14 mm, 16 mm) FGS-HKFM-XX
www.adc.com • +1-952-938-8080 • 1-800-366-3891 96

System Accessories
2" Outer Diameter 7/8" Outer Diameter Single Hinges for Retainer Rings
Slotted Flex Tube Slotted Flex Tube 4" and 6" Covers (FGS-HFRR-10)
(FGS-MIDY) (FGS-MFTY) (FGS-HHGK)
Flex Tube Clamp Storage Spools Shown Installed Mitre Box and Saw
(FGS-HHEC-10) (FGS-MSTOR-A/B/F) (FGS-MSTOR-A/B/F) (FGS-MKIT-ABF)
Retrofit Fin – Kit of 10 Quick Knobs - Kit of 10

(FGS-MFIN-10) (FGS-KQKB)
104892AE
•
Accessories
10/10
www.adc.com • +1-952-938-8080 • 1-800-366-3891 97

System Accessories
Catalog Number
Trough cover clip kit FGS-KT09 FGS-KT09
Slotted and solid flex tubes
2" outer diameter slotted flex tube; FGS-MIDY-XF FGSB-MIDY-XF
(X = length: 5, 10, 15, 20, 25, 50, 75, 100, 125, 150, 200, 250)
1" outer diameter slotted flex tube; FGS-MLDY-XF FGSB-MLDY-XF
(X = length: 5, 10, 15, 20, 25, 50, 75, 100, 125, 150, 200, 250)
7/8" outer diameter slotted flex tube; FGS-MFTY-XF FGSB-MFTY-XF
(X = length: 5, 10, 15, 20, 25, 50, 75, 100, 125, 150, 200, 250)
2" outer diameter solid flex tube; FGS-MISY-XF FGSB-MISY-XF
(X = length: 5, 10, 15, 20, 25, 50, 75, 100, 125, 150, 200, 250)
Hinges; single hinges for 4x4 and 4x6 covers FGS-HHGK FGS-HHGK
Retainer rings; kit of 10 – used to retain fibers in 2" flex tube FGS-HFRR-10 FGS-HFRR-10
Flex tube clamp; kit of 10 – used to secure 2" flex tube to 2" FGS-HHEC-10 FGS-HHEC-10
vertical ducts
Storage spools for dark fiber jumpers; kit of 2 FGS-MSTOR-A/B/F FGS-MSTOR-A/B/F
Mitre box with saw
Used to cut 2x2, 4x4, 4x6, and 4x12 FiberGuide® FGS-MKIT-ABF FGS-MKIT-ABF
straight sections to size
Used to cut 2x2, 4x4, and 4x6 FiberGuide straight sections to size FGS-MKIT FGS-MKIT
IFC tie down for;
4x4 system FGS-HIFC-A FGS-HIFC-A
4x6 system FGS-HIFC-B FGS-HIFC-B
4x12 system FGS-HIFC-F FGS-HIFC-F
104892AE
Quick knobs with T-bolt and cover slip; kit of 10 FGS-KQKB FGS-KQKB
Reverse junction adapter kit for 4x4, 4x6, and 4x12 systems; FGS-HRJA-A/B/F FGS-HRJA-A/B/F
used to connect two parts rotated 180°
Retrofit fin; kit of 10 FGS-MFIN-10 FGS-MFIN-10

•
Accessories
10/10
www.adc.com • +1-952-938-8080 • 1-800-366-3891 98

Index
F FGSB-MD9E-G.............................. 26 FGSB-MHRT-H............................... 60
FGS-ACC063................................ 71 FGSB-MDRT-F................................ 52 FGSB-MHRT-H/F............................ 60
FGS-ASRI-5F............................ 34, 44 FGSB-MDSA-AB...................... 32, 42 FGSB-MHTA-C.............................. 20
FGS-ASRI-10F.......................... 34, 44 FGSB-MDSA-AC............................ 20 FGSB-MHXP-A.............................. 32
FGS-ASRI-15F.......................... 34, 44 FGSB-MDSA-F2B........................... 50 FGSB-MHXP-B............................... 42
FGSB-ACC063.............................. 71 FGSB-MDSA-FB....................... 42, 50 FGSB-MHXP-B/F............................ 50
FGSB-ASRI-5F.......................... 34, 44 FGSB-MDSA-GA........................... 26 FGSB-MHXP-C.............................. 20
FGSB-ASRI-10F........................ 34, 44 FGSB-MDSA-GB............................ 26 FGSB-MHXP-F............................... 50
FGSB-ASRI-15F........................ 34, 44 FGSB-MDSA-HF............................ 60 FGSB-MHXP-F/H............................ 60
FGSB-DHHC...................... 36, 46, 54 FGSB-MDSP-2B............................. 44 FGSB-MHXP-G.............................. 26
FGSB-HMEC-C.............................. 20 FGSB-MDSP-2B-IMP...................... 44 FGSB-MHXP-H.............................. 60
FGSB-MDSP-A............................... 34 FGSB-MIDY-XF.............................. 98
FGSB-ISLAND3-F........................... 52
FGSB-ISLAND-F............................. 52 FGSB-MDSP-A/I............................. 34 FGSB-MISY-XF............................... 98
FGSB-ISLAND-F-513...................... 52 FGSB-MDSP-B............................... 44 FGSB-MJWR-A........................ 34, 44
FGSB-ISLAND-H/F.......................... 61 FGSB-MDSP-B/I............................. 44 FGSB-MJWR-C.............................. 22
FGSB-JUNC-G............................... 28 FGSB-MDSP-C............................... 21 FGSB-MJWR-D.............................. 73
FGSB-KDH2-C............................... 21 FGSB-MDSP-EX-A......................... 34 FGSB-MJWRM-C........................... 72
FGSB-KT03-A.......................... 34, 44 FGSB-MDSP-EX-B.......................... 44 FGSB-MLDY-XF............................. 98
FGSB-KT03-A1........................ 34, 44 FGSB-MDSP-F................................ 52 FGSB-MSDS-C............................... 21
FGSB-KT03-A1-10F................. 34, 44 FGSB-MDSP-F/I.............................. 52 FGSB-MSHA-C.............................. 22
FGSB-KT03-A1-15F................. 34, 44 FGSB-MDSP-G.............................. 26 FGSB-MSHC-J............................... 71
FGSB-KT03-A4-5F................... 34, 44 FGSB-MEX1-C-5F.................... 21, 67 FGSB-MSHC-K.............................. 71
FGSB-KT03-A4-10F................. 34, 44 FGSB-MEX1-C-10F.................. 21, 67 FGSB-MSHS-A............................... 36
FGSB-KT03-A4-15F................. 34, 44 FGSB-MEX1-C-15F.................. 21, 67 FGSB-MSHS-B............................... 46
FGSB-KT03-A10F.................... 34, 44 FGSB-MEXC-E-A........................... 66 FGSB-MSHS-CB............................. 71
FGSB-KT03-A15F.................... 34, 44 FGSB-MEXC-E-A/B/F..................... 66 FGSB-MSHS-F................................ 54
FGSB-KT03-B................................ 52 FGSB-MEXC-E-B............................ 66 FGSB-MSHS-G.............................. 28
FGSB-KT03-B-10F......................... 52 FGSB-MEXC-E-F............................ 66 FGSB-MSHS-H............................... 62
FGSB-KT03-B-15F......................... 52 FGSB-MEXP-A/B/F......................... 67 FGSB-MSHS-K............................... 71
FGSB-MEXP-E-A/B/F...................... 66 FGSB-MSHS-KF............................. 71
Index
FGSB-KT03-C.......................... 21, 67
FGSB-KT03-C-10F................... 21, 67 FGSB-MEXP-LP-A/B/F.................... 67 FGSB-MSHS-KN............................ 71
FGSB-KT03-C-15F................... 21, 67 FGSB-MEXP-LP-G.......................... 26 FGSB-MSHS-KS............................. 71
FGSB-KT03-G-5F........................... 26 FGSB-MFAW-A............................. 36 FGSB-MSHS-KT............................. 71
FGSB-KT07-A4-5F................... 34, 44 FGSB-MFAW-B.............................. 46 FGSB-MSHS-STOR-B..................... 46
FGSB-KT07-A4-10F................. 34, 44 FGSB-MFAW-F.............................. 55 FGSB-MSHS-STOR-F...................... 54
FGSB-MFAW-H............................. 62 FGSB-MSNC-A.............................. 36
104892AE
FGSB-KT07-A4-15F................. 34, 44
FGSB-KTW1-E............................... 71 FGSB-MFTY-XF.............................. 98 FGSB-MSNC-B/G..................... 28, 46
FGSB-KTW1-JA............................. 71 FGSB-MH4A-C.............................. 20 FGSB-MSNC-F............................... 54
FGSB-KTW1-JB.............................. 71 FGSB-MH4E-A.............................. 32 FGSB-MSSC-A............................... 36
FGSB-KTW1-JN............................. 71 FGSB-MH4E-B............................... 42 FGSB-MSSC-B/G..................... 28, 46
FGSB-KTW2-J................................ 71 FGSB-MH4E-F............................... 50 FGSB-MSSC-F................................ 54
FGSB-KTW2-JN............................. 71 FGSB-MH4E-G.............................. 26 FGSB-MTRM-2B............................ 44
FGSB-KTW2-K............................... 71 FGSB-MH4E-H.............................. 60 FGSB-MTRM-2B-IMP..................... 44
FGSB-KTW2-R............................... 71 FGSB-MH9A-C.............................. 20 FGSB-MTRM-A........................ 34, 44
FGSB-KTW2-RN............................ 71 FGSB-MH9A-C-45/2..................... 20 FGSB-MTRM-B.............................. 52
•
FGSB-KTW2-T............................... 71 FGSB-MH9E-A.............................. 32 FGSB-MTRM-C........................ 21, 67

FGSB-KTW2-TN............................. 71 FGSB-MH9E-B............................... 42 FGSB-MTRM-D.............................. 71
10/10
FGSB-KTW4-E............................... 71 FGSB-MH9E-F............................... 50 FGSB-MTRM-DS............................ 71

FGSB-MCDS-AB...................... 34, 44 FGSB-MH9E-G.............................. 26 FGSB-MTRM-F.............................. 52
FGSB-MCDS-EX-AB................. 34, 44 FGSB-MHIS-A.................... 32, 42, 50 FGSB-MTRM-G............................. 26
FGSB-MD4A-C.............................. 20 FGSB-MHIS-A/H............................ 60 FGSB-MU4A-C.............................. 20
FGSB-MD4E-A.............................. 32 FGSB-MHIS-B.................... 32, 42, 50 FGSB-MU4E-A.............................. 32
FGSB-MD4E-B............................... 42 FGSB-MHIS-B/H............................. 60 FGSB-MU4E-B............................... 42
FGSB-MD4E-F............................... 50 FGSB-MHIS-F..................... 32, 42, 50 FGSB-MU4E-F............................... 50
FGSB-MD4E-G.............................. 26 FGSB-MHIS-F/H............................. 60 FGSB-MU4E-G.............................. 26
FGSB-MD4E-H.............................. 60 FGSB-MHRT-A............................... 32 FGSB-MU4E-H.............................. 60
FGSB-MD9A-C.............................. 20 FGSB-MHRT-B............................... 42 FGSB-MU9A-C.............................. 20
FGSB-MD9E-A.............................. 32 FGSB-MHRT-F................................ 50 FGSB-MU9E-A.............................. 32
FGSB-MD9E-B............................... 42 FGSB-MHRT-F/B............................. 50 FGSB-MU9E-B............................... 42
FGSB-MD9E-F............................... 50 FGSB-MHRT-G............................... 26 FGSB-MVAR-A........................ 32, 36
www.adc.com • +1-952-938-8080 • 1-800-366-3891 99

Index
FGSB-MVAR-B......................... 42, 46 FGS-HASB-5/8-48......................... 96 FGS-HWMB-C............................... 72

FGSB-MVAR-F......................... 50, 54 FGS-HASK-C................................. 83 FGS-HWMB-D............................... 73
FGSB-SD4E-A................................ 32 FGS-HCBL-12................................ 86 FGS-ISLAND3-F............................. 52
FGSB-SD4E-B................................ 42 FGS-HCBL-15................................ 86 FGS-ISLAND-F............................... 52
FGSB-SD4E-F................................. 50 FGS-HDCB-C................................. 82 FGS-ISLAND-F-513........................ 52
FGSB-SD9E-A................................ 32 FGS-HDGR.................................... 96 FGS-ISLAND-H/F............................ 61
FGSB-SD9E-B................................ 42 FGS-HDLB-3.................................. 86 FGS-JUNC-G................................. 28
FGSB-SD9E-F................................. 50 FGS-HDSI-AB........................... 34, 44 FGS-KDH2-C................................. 21
FGSB-SDSA-AB....................... 32, 42 FGS-HDSI-F/C................................ 52 FGS-KQKB..................................... 98
FGSB-SDSA-F2B............................ 50 FGS-HDSI-F/D................................ 52 FGS-KT03-A............................ 34, 44
FGSB-SDSA-FB........................ 42, 50 FGS-HETP-F-XX............................. 90 FGS-KT03-A1.......................... 34, 44
FGSB-SDSP-F................................. 52 FGS-HETP-H-5/8............................ 94 FGS-KT03-A1-10F................... 34, 44
FGSB-SH4E-A................................ 32 FGS-HETR-5/8-A............................ 86 FGS-KT03-A1-15F................... 34, 44

FGSB-SH4E-B................................ 42 FGS-HETR-F-XX............................. 90 FGS-KT03-A4-5F..................... 34, 44
FGSB-SH4E-F................................. 50 FGS-HETR-XX................................ 86 FGS-KT03-A4-10F................... 34, 44
FGSB-SH9E-A................................ 32 FGS-HFCK-1/2............................... 96 FGS-KT03-A4-15F................... 34, 44
FGSB-SH9E-B................................ 42 FGS-HFCK-5/8............................... 96 FGS-KT03-A10F...................... 34, 44
FGSB-SH9E-F................................. 50 FGS-HFRR-10................................ 98 FGS-KT03-A15F...................... 34, 44
FGSB-SHRT-A................................ 32 FGS-HHEC-10............................... 98 FGS-KT03-B.................................. 52
FGSB-SHRT-B................................. 42 FGS-HHGK.................................... 98 FGS-KT03-B-10F........................... 52
FGSB-SHRT-F................................. 50 FGS-HIFC-A................................... 98 FGS-KT03-B-15F........................... 52
FGSB-SHRT-F/B.............................. 50 FGS-HIFC-B................................... 98 FGS-KT03-C............................ 21, 67
FGSB-SHXP-A................................ 32 FGS-HIFC-F.................................... 98 FGS-KT03-C-10F..................... 21, 67
FGSB-SHXP-B................................ 42 FGS-HKFM-XX.............................. 96 FGS-KT03-C-15F..................... 21, 67
FGSB-SHXP-B/F.............................. 50 FGS-HKW2-E................................. 73 FGS-KT03-G-5F............................. 26
FGSB-SHXP-F................................. 50 FGS-HLBK...................................... 86 FGS-KT07-A4-5F..................... 34, 44
FGSB-SU4E-A................................ 32 FGS-HLDR-A.................................. 96 FGS-KT07-A4-10F................... 34, 44
FGSB-SU4E-B................................ 42 FGS-HLDR-XX................................ 96 FGS-KT07-A4-15F................... 34, 44
FGSB-SU4E-F................................. 50 FGS-HLR2-C.................................. 82 FGS-KT09...................................... 98
FGSB-SU9E-A................................ 32 FGS-HMEC-A................................ 32 FGS-KTW1-E................................. 71
Index
FGS-BTBL-C................................... 82 FGS-HMEC-B................................. 42 FGS-KTW1-JA............................... 71

FGS-BTBS-C.................................. 82 FGS-HMEC-C................................ 20 FGS-KTW1-JB................................ 71
FGSB-TRMP42............................... 71 FGS-HMEC-E................................. 73 FGS-KTW1-JN............................... 71
FGSB-TRMP44............................... 71 FGS-HMEC-F................................. 50 FGS-KTW2-J.................................. 71
FGSB-V9E44.................................. 71 FGS-HMEC-G................................ 26 FGS-KTW2-JN............................... 71
FGS-CD4E-A................................. 32 FGS-HMEC-H................................ 60 FGS-KTW2-K................................. 71
104892AE
FGS-CD4E-B.................................. 42 FGS-HNLR-AB................................ 86 FGS-KTW2-R................................. 71

FGS-CD9E-A................................. 32 FGS-HNLR-F.................................. 90 FGS-KTW2-RN.............................. 71
FGS-CD9E-B.................................. 42 FGS-HNTP-F-XX............................. 90 FGS-KTW2-T................................. 71
FGS-CDSA-AB......................... 32, 42 FGS-HNTP-H-5/8........................... 94 FGS-KTW2-TN............................... 71
FGS-CH4E-A................................. 32 FGS-HNTR-5/8-A........................... 86 FGS-KTW4-E................................. 71
FGS-CH4E-B.................................. 42 FGS-HNTR-F-XX............................ 90 FGS-MCDS-AB.............................. 34
FGS-CH9E-A................................. 32 FGS-HNTR-XX............................... 86 FGS-MCDS-AB**.......................... 44
FGS-CH9E-B.................................. 42 FGS-HNTS-F-XX............................. 90 FGS-MCDS-EX-AB................... 34, 44
FGS-CHRT-A.................................. 32 FGS-HNTS-F-XX-LP........................ 90 FGS-MD4A-C................................ 20
FGS-CHRT-B.................................. 42 FGS-HNTS-XX................................ 86 FGS-MD4E-A................................. 32
•
FGS-CHXP-A................................. 32 FGS-HNTS-XX-LP........................... 86 FGS-MD4E-B................................. 42

FGS-CHXP-B.................................. 42 FGS-HOMX-16MM....................... 86 FGS-MD4E-F................................. 50
10/10
FGS-CU4E-B.................................. 42 FGS-HRJA-A/B/F............................ 98 FGS-MD4E-G................................ 26

FGS-CU9E-B.................................. 42 FGS-HSHC-10............................... 21 FGS-MD4E-H................................. 60
FGS-DHCP...................28, 36, 46, 54 FGS-HTHR-1/2-12......................... 96 FGS-MD9A-C................................ 20
FGS-DHHC........................ 36, 46, 54 FGS-HTHR-1/2-30......................... 96 FGS-MD9E-A................................. 32
FGS-FD4E-H.................................. 62 FGS-HTHR-1/2-72......................... 96 FGS-MD9E-B................................. 42
FGS-FDSA-HF................................ 62 FGS-HTHR-5/8-12......................... 96 FGS-MD9E-F................................. 50
FGS-FH4E-H.................................. 62 FGS-HTHR-5/8-30......................... 96 FGS-MD9E-G................................ 26
FGS-FHRT-H................................... 62 FGS-HTHR-5/8-72......................... 96 FGS-MDRT-F.................................. 52
FGS-FHRT-H/F................................ 62 FGS-HTHR-XX-NN......................... 96 FGS-MDSA-AB........................ 32, 42
FGS-FHXP-F/H............................... 62 FGS-HTR2-1/2............................... 83 FGS-MDSA-AC.............................. 20
FGS-FHXP-H.................................. 62 FGS-HTR2-2-5/8............................ 83 FGS-MDSA-F2B............................. 50
FGS-FSFC-H................................... 62 FGS-HTR2-5/8............................... 83 FGS-MDSA-FB......................... 42, 50
FGS-HAEJ-C.................................. 83 FGS-HTUB-F-XX............................ 90 FGS-MDSA-FB-L............................ 50
FGS-HASB-1/2-36......................... 96 FGS-HTUB-XX............................... 86 FGS-MDSA-FB-R............................ 50
FGS-HASB-1/2-48......................... 96 FGS-HUFB-A.................................. 86 FGS-MDSA-GA............................. 26
FGS-HASB-5/8-36......................... 96 FGS-HUFB-C.................................. 82 FGS-MDSA-GB.............................. 26
www.adc.com • +1-952-938-8080 • 1-800-366-3891 100

Index
FGS-MDSA-HF.............................. 60 FGS-MHXP-A................................ 32 FGS-MU9E-B................................. 42

FGS-MDSP-2B............................... 44 FGS-MHXP-B................................. 42 FGS-MVAR-A.......................... 32, 36
FGS-MDSP-2B-IMP........................ 44 FGS-MHXP-B/F.............................. 50 FGS-MVAR-B........................... 42, 46
FGS-MDSP-A................................. 34 FGS-MHXP-B/F-VS......................... 50 FGS-MVAR-F........................... 50, 54
FGS-MDSP-A/I............................... 34 FGS-MHXP-C................................ 20 FGS-SD4E-A.................................. 32
FGS-MDSP-B................................. 44 FGS-MHXP-F................................. 50 FGS-SD4E-B.................................. 42
FGS-MDSP-B/I............................... 44 FGS-MHXP-F/H.............................. 60 FGS-SD4E-F................................... 50
FGS-MDSP-C................................. 21 FGS-MHXP-F/H-VS........................ 94 FGS-SD9E-A.................................. 32
FGS-MDSP-EX-A........................... 34 FGS-MHXP-F-VS............................ 50 FGS-SD9E-B.................................. 42
FGS-MDSP-EX-B............................ 44 FGS-MHXP-G................................ 26 FGS-SD9E-F................................... 50
FGS-MDSP-F.................................. 52 FGS-MHXP-H................................ 60 FGS-SDSA-AB.......................... 32, 42
FGS-MDSP-F/I................................ 52 FGS-MHXP-H-VS........................... 94 FGS-SDSA-F2B.............................. 50
FGS-MDSP-F-VS............................ 50 FGS-MIDY-XF................................ 98 FGS-SDSA-FB.......................... 42, 50

FGS-MDSP-G................................. 26 FGS-MISY-XF................................. 98 FGS-SDSP-F................................... 52
FGS-MEX1-C-5F...................... 21, 67 FGS-MJWR-A.......................... 34, 44 FGS-SH4E-A.................................. 32
FGS-MEX1-C-10F.................... 21, 67 FGS-MJWR-C................................ 22 FGS-SH4E-B.................................. 42
FGS-MEX1-C-15F.................... 21, 67 FGS-MJWR-D................................ 73 FGS-SH4E-F................................... 50
FGS-MEXC-E-A............................. 66 FGS-MJWRM-C............................. 72 FGS-SH9E-A.................................. 32
FGS-MEXC-E-A/B/F........................ 66 FGS-MKIT...................................... 98 FGS-SH9E-B.................................. 42
FGS-MEXC-E-B.............................. 66 FGS-MKIT-ABF............................... 98 FGS-SH9E-F................................... 50
FGS-MEXC-E-F.............................. 66 FGS-MLDY-XF................................ 98 FGS-SHRT-A................................... 32
FGS-MEXP-A/B/F........................... 67 FGS-MSDS-C................................. 21 FGS-SHRT-B................................... 42
FGS-MEXP-E-A/B/F........................ 66 FGS-MSHA-C................................ 22 FGS-SHRT-F................................... 50
FGS-MEXP-LP-A/B/F....................... 67 FGS-MSHC-J................................. 71 FGS-SHRT-F/B................................ 50
FGS-MEXP-LP-G............................ 26 FGS-MSHC-K................................ 71 FGS-SHXP-A.................................. 32
FGS-MFAW-A................................ 36 FGS-MSHS-A................................. 36 FGS-SHXP-B.................................. 42
FGS-MFAW-B................................ 46 FGS-MSHS-B................................. 46 FGS-SHXP-B/F................................ 50
FGS-MFAW-F................................ 55 FGS-MSHS-CB............................... 71 FGS-SHXP-F................................... 50
FGS-MFAW-H................................ 62 FGS-MSHS-F.................................. 54 FGS-SU4E-A.................................. 32
FGS-MFIN-10................................ 98 FGS-MSHS-G................................. 28 FGS-SU4E-B.................................. 42
Index
FGS-MFTY-XF................................ 98 FGS-MSHS-H................................. 62 FGS-SU4E-F................................... 50
FGS-MH4A-C................................ 20 FGS-MSHS-K................................. 71 FGS-SU9E-A.................................. 32
FGS-MH4E-A................................. 32 FGS-MSHS-KF............................... 71 FGS-TRMP42................................. 71
FGS-MH4E-B................................. 42 FGS-MSHS-KN.............................. 71 FGS-TRMP44................................. 71
FGS-MH4E-F................................. 50 FGS-MSHS-KS............................... 71 FGS-V9E44.................................... 71
FGS-MH4E-G................................ 26 FGS-MSHS-KT............................... 71 FGS-VDSA-FB-L............................. 50
104892AE
FGS-MH4E-H................................. 60 FGS-MSHS-STOR-B....................... 46 FGS-VDSA-FB-R............................. 50

FGS-MH4E-H-VS........................... 94 FGS-MSHS-STOR-F........................ 54 FGS-VQE22................................... 71
FGS-MH9A-C................................ 20 FGS-MSNC-A................................ 36 FGS-VQE44................................... 71
FGS-MH9A-C-45/2....................... 20 FGS-MSNC-B/G....................... 28, 46
FGS-MH9E-A................................. 32 FGS-MSNC-F................................. 54 R
FGS-MH9E-B................................. 42 FGS-MSSC-A................................. 36 RGS-RA001-B................................ 79
FGS-MH9E-F................................. 50 FGS-MSSC-B/G....................... 28, 46 RGS-RC001-B................................ 79
FGS-MH9E-F-VS............................ 50 FGS-MSSC-F.................................. 54 RGS-RC002-B................................ 79
FGS-MH9E-G................................ 26 FGS-MSTOR-A/B/F......................... 98 RGS-RC003-B................................ 79
FGS-MHIS-A...................... 32, 42, 50 FGS-MTRM-2B.............................. 44 RGS-RC004-B................................ 79
•
FGS-MHIS-A/H.............................. 60 FGS-MTRM-2B-IMP....................... 44 RGS-RC005-B................................ 79

FGS-MHIS-B...................... 32, 42, 50 FGS-MTRM-A.......................... 34, 44 RGS-RC006-B................................ 79
10/10
FGS-MHIS-B/H............................... 60 FGS-MTRM-B................................ 52 RGS-SC001-B................................ 79

FGS-MHIS-F....................... 32, 42, 50 FGS-MTRM-C.......................... 21, 67 RGS-SC001-B8.............................. 79
FGS-MHIS-F/H............................... 60 FGS-MTRM-D................................ 71 RGS-SC002-B................................ 79
FGS-MHIS-JIG-A/B/F.......... 32, 42, 50 FGS-MTRM-DS.............................. 71 RGS-SC003-B................................ 79
FGS-MHRT-A................................. 32 FGS-MTRM-F................................. 52 RGS-TC001-B................................ 79
FGS-MHRT-B................................. 42 FGS-MTRM-G............................... 26 RGS-V0BX0A-P............................. 79
FGS-MHRT-F.................................. 50 FGS-MTRM-H................................ 61 RGS-V0BX0B-P.............................. 79
FGS-MHRT-F/B............................... 50 FGS-MU4A-C................................ 20 RGS-V0CX0A-P............................. 79
FGS-MHRT-F/B-VS......................... 50 FGS-MU4E-A................................. 32 RGS-V0CX0B-P............................. 79
FGS-MHRT-F-VS............................. 50 FGS-MU4E-B................................. 42 RGS-VC001-B............................... 79
FGS-MHRT-G................................. 26 FGS-MU4E-F................................. 50 RGS-VC002-B............................... 79
FGS-MHRT-H................................. 60 FGS-MU4E-G................................ 26 RGS-VC003-B............................... 79
FGS-MHRT-H/F.............................. 60 FGS-MU4E-H................................. 60 RGS-VRACC-CRKITB..................... 79
FGS-MHRT-H/F-VS......................... 94 FGS-MU9A-C................................ 20 RGS-VRACC-CRKITP..................... 79
FGS-MHTA-C................................ 20 FGS-MU9E-A................................. 32
www.adc.com • +1-952-938-8080 • 1-800-366-3891 101

FiberGuide Fiber Management Systems
Website: www.adc.com
From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080
Fax: +1-952-917-3237 • For a listing of ADC's global sales office locations, please refer to our website.
ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101
Specifications published here are current as of the date of publication of this document. Because we are continuously
improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may
verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc.
views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features
contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer
104892AE 10/10 Revision © 2010, 2009, 2007, 2005, 2004, 2003, 2002, 2001, 2000, 1998, 1997, 1995
ADC Telecommunications, Inc. All Rights Reserved

ADC Fiber Protection System Catalog

Uploaded by

Copyright:

Available Formats

ADC Fiber Protection System Catalog

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

ADC Fiber Protection System Catalog

Uploaded by

Copyright:

Available Formats

What are fiber management systems used for?

What are fiber management systems used for?

What are some of the parts and components of fiber management systems?

What are some of the parts and components of fiber management systems?

FiberGuide® Fiber Management Systems

Patch Cord Densities

Snap-Fit™ Junction – 4" H x 4" W................................................................................................................. 36

Downspouts and Attachments – 4" H x 12" W............................................................................................. 52

www.adc.com • +1-952-938-8080 • 1-800-366-3891 iii

Express Exit™ Family

Vertical Fiber Management Systems

2x2 System Support Kits

2x6, 4x4, 4x6 System Support Kits

4x12 System Support Kits

Support Kit Drawings.................................................................................................................................... 91

4x24 System Support Kits.............................................................................................................................. 94

Support Kit Accessories.................................................................................................................................. 96

www.adc.com • +1-952-938-8080 • 1-800-366-3891 iv

The Industry's Most Comprehensive Optical Raceway System

The FiberGuide system is a complete set of products designed and

2x6 – Designed for height restricted environments, this robust

4x4 – Features the maximum capacity to support 1,600, 2 mm patch

cords. It has been engineered to allow straight sections to be

4x12 – The 12-inch-wide trough has a maximum capacity to support

4x24 – The 4x24-inch system is the ultimate raceway solution to

www.adc.com • +1-952-938-8080 • 1-800-366-3891 1

Examples of FiberGuide® Integration

FL2000 FiberGuide® FiberGuide®

FiberGuide® Materials Product Statement

Raw Material Meets Finished Product Meets

FiberGuide Straight Sections Flame rated: UL94V-0 UL94V-0 and UL2024

FiberGuide Molded Fittings Flame rated: UL94V-0 UL94V-0 and UL2024

FiberGuide Flex Tube (2") Flame rated: UL94V-0 UL2024

FiberGuide Flex Tube (1") Flame rated: UL94V-0 UL2024

FiberGuide Flex Tube (7/8") Flame rated: UL94V-2 UL2024

www.adc.com • +1-952-938-8080 • 1-800-366-3891 2

ADC continues to add innovative products to FiberGuide®

Hinged Cover System

Express Exits™ Express Exit™ Family

protects the integrity of existing fibers and increases the overall

Raceway Reconfiguration Solutions

*Expandable straight section not available for 4x24 system.

www.adc.com • +1-952-938-8080 • 1-800-366-3891 3

Features and Benefits

www.adc.com • +1-952-938-8080 • 1-800-366-3891 4

4x24 45° Up Elbow

www.adc.com • +1-952-938-8080 • 1-800-366-3891 5

4x6 Downspout Cover

*Shown without cover

2x2 Rigid Drop Option 2" Flex Tube Drop Option

www.adc.com • +1-952-938-8080 • 1-800-366-3891 6

Express Exit 2x2 4x6 Straight Section Express Exit 2x2

4x6 Straight Section 2x2 45° Down Elbow

2x2 Junction Kit (4) 2" Flex Tube Attachment

* Shown without Cover 2x2 Vertical * Shown without Cover

2x2 Rigid Drop Option 2" Flex Tube Drop Option

www.adc.com • +1-952-938-8080 • 1-800-366-3891 7

4x12 Horizontal T 4x12 Horizontal

4x12 Snap-Fit 4x6 Straight

FGS-MFAW-F FGS-MSHS-B FGS-MFAW-B