I.M.T. INTERNATIONAL S.p.A.

Industria Meccanica Trivelle

via D’Ancona, 39
AF 130
60027 Osimo (AN) Italy
Tel. +39 071 723 341
HYDRAULIC
Fax +39 0717 133 352
[email protected] DRILL RIG
www.imtspa.com

IMT International S.p.A. was founded in 1974 by Mr.

AF 110 AF 130
Giulio Accorroni. Since then, the Company has
concentrated on the acquisition of specific know-how for
the planning and construction of hydraulic drill rigs, in
constant search of high quality products and customer
satisfaction.

IMT has always invested in technology and design. This

policy has given life to a new plant that is on the cutting
edge and whose objective is that of raising production
quality even more.

In 1999, IMT International S.p.A. was certified ISO 9001.

This important, official recognition was given to IMT
International S.p.A. following strict inspections carried
AF 180c AF 220
out by authorised institutions. This confirms the quality
level, which has already been appreciated over the years,
all over the world.

IMT International S.p.A., like very few other companies

in the field, has a global commercial and assistance
network, present in over 30 countries in the world.
From anywhere in the world, IMT customers know they
can always count on fast and efficient 24-hours service,
which ensures that all inquiries are taken care of
immediately. Furthermore, all IMT models are
mounted on the best known bases in the field, which
gives our products reliability as well as the guarantee
that spare parts can be easily found all over the world.
AF 240 AF 280
IMT’s main goal, today, is not only to improve
technology, but also to make our growing family of
customers satisfied for have chosen IMT.

STUDIO CONTI
AF 300 FR 1200 HD
 AF 130

THE PERFECT BLEND The AF 130 is a machine that satisfies the need
for high productivity when carrying out piles of

OF TECHNOLOGY medium diameter and depth. It can carry out

piles of a diameter of 1500mm and a depth up

AND PERFORMANCE to 38 m or 47 m but it is almost unbeatable on

job sites with piles of a diameter of 800mm or
1000mm and a depth of 20 - 30m.
The machine was designed upon the request
of many clients that are interested in high
productivity and reliability.
The base is a CAT 324DLN capable of offering
great stability even with fixed undercarriage,
considerable power and exceptional speed in
the opening / closing and movement operations.
The high-quality of the material and
components used in manufacturing the mast,
rotary and winches, together with the use of a
base and undercarriage of proven quality,
guarantee great reliability and great value for
decades to come.
OPERATOR STATION
The operator station of the AF 130 is a
particular example of comfort and rationality.
Besides the comfort available on the CAT base
(adjustable seat, air conditioning, etc) all the
controls are properly placed so as to give the
operator maximum control on the machine
operations. The main controls, such as main
winch, swing, rotary and crowd system are
operated by means of two main joysticks. The
drilling depth and pile verticality control
systems are foreseen in the cabin.

3
BASE
The AF 130 uses a CAT 324 DLN base.
Caterpillar installs a CAT C7 type motor on this
base which is set to supply a power of 174 HP
(130 KW) at 1800 rpm. The hydraulic system is
made in order to exploit the power of the
diesel to the most and in order to guarantee
maximum performance.

UNDERCARRIAGE
The AF 130 has the standard original
undercarriage of the CAT 324 DLN. Its width is
2990mm with a length of 4630mm and with
its 600mm wide shoes, we can guarantee
great stability in any type of ground. It has
considerable traction force, which allows easy
movement even in the most difficult job sites
(maximum superable gradient 75%).
ARTICULATION
All the articulations of the AF 130 use case
hardened pins and bushings of large
dimensions which guarantee maximum
precision in time. This kind of articulation
offers the following advantages:
• possibility of moving the working axis
accurately without losing the verticality of the
mast
• possibility of working in a large range
(essential when working with casing oscillator)
• correct anchoring of the mast by means of a
hinge and tilting cylinder anchored at the top
• correct division of the machine weight in
transportation configuration

ROTARY 5

The rotary of the AF 130 is extremely reliable. It

has been designed in order to guarantee a very
compact, efficient and powerful rotary. IMT has
developed a rotary with a single transmission
group. The transmission group is made up of a
hydraulic motor and a new power shift purposely
studied and designed to obtain maximum
performance. The tooth crown and the pinion are
always in oil bath supported by two large
bearings. The rotary is capable of transmitting an
effective torque
of 117 kNm to the tool. The working speeds vary
from 8,3 to 27 rpm. The unloading speed is 50 –
120 rpm. During the drilling phase, the rotary has
the entire power of the diesel at its complete
disposal. The rotary is equipped with a sliding
adapter that is essential to absorb the
considerable shock connected to the high speed
of the main winch.
 7

KELLY BAR MAST

The standard kelly bar associated with the It is built with high-resistance material, capable
machine is a J-type, 4-element kelly bar with a of supporting considerable stress with reduced
square joint of 130x130mm and a depth of weights (and therefore inertial force). The
38m. It is also possible to supply a 5-element verticalization of the mast is controlled by an
kelly bar with a depth of 47m or a kelly bar electronic level located in the cabin.
that is slightly shorter than the standard kelly The head of the mast has a “Y” shape for the
bar (4/33) that is useful when utilizing casings pulleys of the main and secondary winches in
or an IMT full interlocking kelly bar (to use this order to position steel cages without moving
type of kelly bar it is necessary to replace the the parallelogram.
sliding adapter of the rotary). The particular conformation of the mast, made
up of two moveable parts, allows you to
transport the Kelly bar with the machine, by
means of a hydraulic cylinder, thereby reducing
the time it takes for the opening.
WINCHES
The winches are positioned in the lower part of
the mast, in front of the cabin, so that the
operator can constantly check the proper
operation.
Thanks to the fact that the cable moves
parallely to the mast, flection is not created on
the upper part of the mast and the operating
life of the cable is therefore much longer.
During the lifting and lowering phase, the
main winch has the entire power of the diesel
at its disposal; this gives the machine
considerable speed and therefore maximum
productivity. It has a hydraulic “down the
hole” system which prevents the unwinding of
the cable when the tool reaches the ground.
Another system, call “free flow”, allows the
cable to advance in the drilling phase when the
rotary advances.
The main winch has a maximum pullback of
120 kN and a speed of 90m/min. and the
auxiliary winch has a maximum pulling force of
60 kN and a speed of 90m/min.
CROWD SYSTEM
The crowd system of the AF 130, located on
the front part of the mast, allows the vertical
translation of the rotary.
Thanks to the crowd system, located on the
rotary carrier slide, we are capable of
9
transferring a push of 100 kN on the tool. The
use of the crowd system is also exploited when
carrying out piles with the driving and
extraction of the cylinder. In fact, we are
capable of guaranteeing an extraction force of
165 kN. The stroke is 3325 mm.
AF 130
TECHNICAL DATA
Base CAT 324 DLN
Undercarriage length / width / shoe mm 4630/2990/600 in 182/118/23,6
Engine type CAT C7
Power 130 KW (174 HP) 130 KW (174 HP)
@ 1800 rpm @ 1800 rpm

Rotary
Installed torque kNm 117 lbf ft 86295
Working speed rpm 8.3 - 27 rpm 8.3 - 27
Discharge speed rpm 50 - 120 rpm 50 - 120
Winches
Main winch pull force kN 120 lbf 26980
Main winch speed m/min 90 ft/min 295
Main winch Cable diameter mm 22 in /
Auxiliary winch pull force kN 60 lbf 13490
Auxiliary winch Speed m/min 90 ft/min 295
Auxiliary winch Cable diameter mm 15 in /
Crowd system
Kelly crowd push kN 100 lbf 22485
Kelly crowd pull kN 165 lbf 37095
Stroke mm 3325 in 131 11
Mast
Mast raking forward 5° 5°
Mast side raking ±5° ±5°
Mast raking backwards 15° 15°
Pile max. diameter mm 1500 in 60
Kelly bar
Standard 3/28 - 4/38 3/28 - 4/38
Options available 4/33 - 5/47 4/33 - 5/47
Operating Weight t (metric) 33 lbs 72755
w/standard kelly bar

All technical data are indicatives

and subject to change without notice
 WORLDWIDE SALES
AND ASSISTANCE
NETWORK

San Francisco
Moscow
London
Frankfourt
ITALY Osimo
Madrid
Athens Beijing
Osaka
Miami Algeri Bagdad
IMT north and south America Shangai
Mexico City Distributor headquarters
Cairo Hong Kong
Mumbai
Dubai
Taipei

Caracas Lagos

Singapour

Buenos Aires

IMT dealers, a global network

at your service
IMT, like very few other companies in the field,
has a global commercial and assistance network
which is present in over 30 countries.From any
part of the world, IMT clients know that they can
always count on fast and efficient service.
Furthermore, since 1997 IMT drill rigs are sold
and supported on the American market by Kelly
Tractor, one of the biggest Caterpillar dealers in
the world.
This is an important goal for the further
reinforcement of the presence of IMT in
international markets.
 I.M.T. INTERNATIONAL S.p.A.
Industria Meccanica Trivelle
via D’Ancona, 39
AF 130
60027 Osimo (AN) Italy
Tel. +39 071 723 341
HYDRAULIC
Fax +39 0717 133 352
[email protected] DRILL RIG
www.imtspa.com

IMT International S.p.A. was founded in 1974 by Mr.

AF 110 AF 130
Giulio Accorroni. Since then, the Company has
concentrated on the acquisition of specific know-how for
the planning and construction of hydraulic drill rigs, in
constant search of high quality products and customer
satisfaction.

IMT has always invested in technology and design. This

policy has given life to a new plant that is on the cutting
edge and whose objective is that of raising production
quality even more.

In 1999, IMT International S.p.A. was certified ISO 9001.

This important, official recognition was given to IMT
International S.p.A. following strict inspections carried
AF 180c AF 220
out by authorised institutions. This confirms the quality
level, which has already been appreciated over the years,
all over the world.

IMT International S.p.A., like very few other companies

in the field, has a global commercial and assistance
network, present in over 30 countries in the world.
From anywhere in the world, IMT customers know they
can always count on fast and efficient 24-hours service,
which ensures that all inquiries are taken care of
immediately. Furthermore, all IMT models are
mounted on the best known bases in the field, which
gives our products reliability as well as the guarantee
that spare parts can be easily found all over the world.
AF 240 AF 280
IMT’s main goal, today, is not only to improve
technology, but also to make our growing family of
customers satisfied for have chosen IMT.

STUDIO CONTI
AF 300 FR 1200 HD