Scribd
Upload
173 views17 pages

Autonomie - Training - Part3a

This document provides instructions for simulating an existing vehicle using Autonomie simulation software. It describes how to launch the Autonomie GUI, select a username, and open an existing vehicle model called "Split Midsize HEV 2wd Single Mode Default". It then explains how to select a driving cycle called "Japan10 Cycle", execute the simulation, and view the results. The document also describes how to add a second vehicle to the simulation for comparison purposes and review the simulation results.

Uploaded by

muradbashir
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
173 views17 pages

Autonomie - Training - Part3a

This document provides instructions for simulating an existing vehicle using Autonomie simulation software. It describes how to launch the Autonomie GUI, select a username, and open an existing vehicle model called "Split Midsize HEV 2wd Single Mode Default". It then explains how to select a driving cycle called "Japan10 Cycle", execute the simulation, and view the results. The document also describes how to add a second vehicle to the simulation for comparison purposes and review the simulation results.

Uploaded by

muradbashir
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 17

Training 

Part 3A
‐ Getting Started ‐
i d
How to Simulate an Existing Vehicle
g

Sponsored by Lee Slezak

“This presentation does not contain any proprietary or confidential information”
Run a Single
g Vehicle

2
Launch Autonomie GUI - Run aStart.exe
From the desktop The first time you launch 
Autonomie, Click “Register” to 
ensure Matlab is recognized

Or Windows Explorer

3
Select OPEN Menu

2 – Select/Enter you Username 
A specific username 
(no special characters, no space)
allows you to create
allows you to create 
your own working 
environment 
=> Any file under this 
directory will only be 
seen by you

3 – Select “Open a Vehicle”

1 – Select the Open Menu
4
Select the Vehicle “Split Midsize HEV 2wd Single Mode
Default
Default”
1 – Select the Vehicle Options are Searchable 
Through Key Words

2 – Validate the Selection

5
Main GUI opens and Shows Vehicle Architecture

Project Explorer is used to switch


between projects and access systems
within each project

6
Main GUI opens and Shows Vehicle Architecture

Selected Item Explorer is used to


provide set of available selection
based on the current context.
context
In this case, one can change
configuration, systems or vehicles.

7
Main GUI opens and Shows Vehicle Architecture
Vehicle
V hi l Navigation
N i ti
allows one to go from
one Level to another

Main Screen allows one to


view the status of the
model completion

System properties allows


one to view and change
g
attributes of the model

8
Vehicle is Loaded, Click on Setup Process

9
Select a Japan10 Cycle

Drag & Drop in the


Simulation Window

10
Process is Selected, Click on Execute

Click on Perform
Selected Action

11
Vehicle and Process are Defined, Run the
Simulation

Click on Perform
Selected Action

12
The Vehicle Model is Built and the Simulation Starts
Driver
Environment

Vehicle Powertrain
Controller (VPC)
( )
represents high
level control

Vehicle Powertrain
Architecture (VPA)
represents
p the
powertrain systems
and their low level
controllers

13
Run Several Vehicles

14
Add a Second Vehicle

1 - Select the Saved Vehicle from


the Selected Item Explorer

2 – Drag&Drop on top of Vehicle


Project

15
Two Vehicles are Now Available

16
The Vehicle Can Be Compared in the Review Option

17

You might also like