Scribd
Upload
70 views3 pages

ADE Papaer I

This document appears to be a pre-university examination for an Electrical and Electronics Engineering course. It contains 5 questions assessing student knowledge of analog and digital electronics topics. The questions cover LED and photodiode construction and operation, oscillators such as RC phase shift and Wein bridge oscillators, feedback amplifiers, flip-flops, counters, and timers. The exam is 3 hours long and contains a total of 100 marks across the 5 questions.

Uploaded by

Prabhat Mishra
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
70 views3 pages

ADE Papaer I

This document appears to be a pre-university examination for an Electrical and Electronics Engineering course. It contains 5 questions assessing student knowledge of analog and digital electronics topics. The questions cover LED and photodiode construction and operation, oscillators such as RC phase shift and Wein bridge oscillators, feedback amplifiers, flip-flops, counters, and timers. The exam is 3 hours long and contains a total of 100 marks across the 5 questions.

Uploaded by

Prabhat Mishra
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 3

College of Engineering & Technology,

Modinagar
Printed Pages: 04 TEC24

. (Following Paper ID and Roll No. to be filled in your Answer Book)

PAPER ID : 0313
Roll
No:

Pre – University Examination ODD Semester (2010 – 11)


Electrical & Electronics Engineering
Analog & Digital Electronics

Time : 3hrs] [Total Marks: 100


Paper code : EEC 309
Note: (1)Attempt all questions
(2)All question carry equal marks

Q1 Attempt any four parts of the following. (5X4=20)

a) A LED is to be used to indicate the ON/OFF status of a DC power


supply having a dc output voltage of 5v through a series resistance
of 700 Ω. Calculate the LED current .Assume the voltage drop
across an LED is 1.5 v.
b) Explain the construction of LED. What are the semi conductor
material used for its construction. Also write the colors of emitted
light.
c) Describe the construction & operation of photo diode. Give its R = 8.2kΩ, C = 0.01μF, R1 = 1.2 kΩ, Rf =39 kΩ
application & advantage. (i) Determine whether we can get sustained oscillation
d) Give the application of varicap in tuning a resonant circuit. Also (ii) What will be the frequency of oscillation
write the other Applications of varactor diode
e) Draw the VI characteristics of schottky diode. Draw its equivalent Draw a neat diagram of RC phase shift oscillator using transistor.
circuit &its symbol. Explain the operation of the circuit.
f) Comparison of Tunnel diode & PN junction diode. Also write the
Application of tunnel diode.

b) Draw the Wein bridge oscillator using a transistor. Explain


its principal of operation.
Q2 Attempt any four parts of the following. (5X4=20)
c) Explain the operation of transistorized Hartley oscillator
a) What are various properties of feed back. Explain two of them in calculate the frequency of oscillation of a Hartley oscillator.
In detail.
Q4 Attempt any two-part the following. (10x2=20)
b) What are the effect of input resistance & output resistance in
voltage shunt feed back. a) Describe the working of Multiplexer.& Demultiplexer.
Implement the multiple output function using a suitable
c) Calculate the voltage gain, input & output resistance of a series Decoder
feedback amplifier having Av=300, Ri = 1.5kΩ, Ro= 50 kΩ & F1 (A,B,C)=Σm (0,4,7) +d(2,3)
β = 1/15. F2 (A,B,C)= Σm(1,5,6)
F3(A,B,C)= Σm(0,2,4,6)
d) What are the effect of low frequency response of CE amplifier.
b) What do you mean by Flip flop?.Describe the working of
e) What is emitter follower .Explain in detail Edge triggered SR FF, JK FF, D FF, T FF.
Conversions
f) An amplifier has an input of 10mV & a gain of 200 without i) Conversion of JK FF to T FF
feedback .The distortion produced at the output of the amplifier is 10 ii) Conversion of SR FF to T FF
% . It is desired to reduced the distortion to 1% by using negative
feedback. Calculate gain & output voltage with feedback. c) What is the universal shift register? Explain. Draw & explain the
3 bit Asynchronous up & down counter
Q 3 Attempt any two-part the following. (10x2=20)
Q5 Attempt any two-part the following. (10x2=20)
a) For an RC phase shift oscillator, the component values are
a) Describe the working of 555 timer. How it works in astable
Mode.
b) Define Schmitt trigger (Regenerative Comparator).Explain
Its types
c) Explain the working of RAM

You might also like