0% found this document useful (0 votes)

88 views52 pages

Combitech: System - Model Construction

Uploaded by

Adam Jurkiewicz

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

88 views52 pages

Combitech: System - Model Construction

Uploaded by

Adam Jurkiewicz

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

You are on page 1/ 52

Hardware catalogue

combitech system | Model construction

®
combitech system | Model construction
®

Explanations

Colour guide materials

AGK Aluminium casting, tumbling polished MES Brass, solid or brass, shiny solid

AGP Aluminium casting, powder-coated CU Copper, solid

ALC alferceram , ceramic powder-coated aluminium ABS Plastic, acrylonitrile butadiene styrene
®

ALCR Aluminium chrome-plated EPDM Plastic, ethylene propylene diene rubber

ALG Aluminium, vibratory finish EVA Plastic, ethylene vinyl acetate

ALK Aluminium, tumble polished GUM Rubber

ALM Brass-plated aluminium PA Plastic, polyamide

ALO alferoxal , multicolour aluminium, anodized PC Plastic, polycarbonate

ALP Powder-coated aluminium PE Plastic, polyethylene

ALU Uncoated aluminium PET Plastic, polyethylene terephthalate

ALX Anodized aluminium POM Plastic, polyoxymethylene

EDL Stainless steel PP Plastic, polypropylene

FER Hard ferrite PS Plastic, polystyrene

GUS Cast iron PU Plastic, polyurethane

SGC Injection moulded, chrome-plated PVC Plastic, polyvinylchloride

STA Steel or steel, galvanized TPE Plastic, thermoplastic elastomers

EHO Real wood

Packaging Explanations Brand Names

loose: The item is not packed. Important Note!

shrink-wrapped: The loose item is shrink-wrapped in transparent PE foil. The following trademarks (®, M. R.) are registered for the alfer aluminium
®

shrink-wrapped SS: The shrink-wrapped item comes with a SS Euro-per- Gesellschaft mbH, D-79793 Wutoeschingen, (as of: 01. 09. 2013)
foration allowing it to be suspended.
SS bag: The item is packed in a transparent LDPE bag (Euro-perforation). alfer EU CH
®

SS polybag: The article comes in a PE tube. alferoxal B D F I L NL A P CH

SS box: the item is packed in a transparent box with Euro-perforation. alferceram B D F I L NL A P CH

SS cardboard box: The item comes in a SS cardboard box. clipstech EU MEX

on roll: The item comes on a roll and can be cut to measure. combitech EU CH MEX
®

sealed: The item is sealed with a transparent PE foil. cabelino EU CH

foil-wrapped, one-sided: The item is covered on one side with a protective logika EU
®

foil. ferroplatan EU
®

rolled in a box: The item is packed rolled up in a box. coaxis EU USA MEX
®

clap-pac: The item comes in impact-resistant, transparent, PVC snapshut x-star EU USA
®

packaging (multi-perforation) and can be re-closed. easyrack EU

Min. OU: The minimum order unit specifies both the minimum order
quantity of an item and the order unit. The use of these rights is permitted only upon expressed authorization by
e. g.: Min. OU = 5 pcs.: means that orders must either be for a minimum alfer aluminium Gesellschaft mbH, D-79793 Wutoeschingen.
®

of 5 pieces of this item, or multiples thereof.

PU: Packaging unit.

2
In the heart of Europe
Nestled between the Upper Rhine and the Southern Black Forest is the Wutachtal Valley. Close to both Switzerland
and France, this has been home to many world leading aluminium specialists for decades. Today, it is Europe’s largest
connected economic area for the production and processing of aluminium. It is therefore unsurprising that the region is
also known as the ‘Aluminium Valley’. This is also the place where the alfer success story began in 1973 in Wutöschin-
®

gen, Baden-Württemberg. Since then, alfer has used this site to develop a whole range of aluminium profiles, primarily
®

for DIY enthusiasts and tradespeople, which set even international standards.
1

54
combitech system | Model construction
®
combitech system | Model construction
®

Range overview

Model building made easy

The combitech -connect system (7.5 mm)

alfer has a penchant for model building. This is demonstrated,

for example, by the practical combitech -connect connectors

(7.5 mm). These are made from robust plastic (polyamide) and make
both recreational and professional model building projects easy.
Whether crane systems, car parks or railway bridges: even the most
demanding of models can be created in the shortest of times thanks
to combitech -connect.
®

combitech -connect connectors are available in black and white

as 45°, 90° and 150° versions as well as in several different shapes.

They can be combined with all square tubes and special profiles in
the 7.5 mm series.

Good advice regarding wheels

combitech system | Model construction | 97032 | 01 2017 | 71708

Want to build windmills, water wheels or Ferris wheels? By combin-
ing the 150° connect connectors with connect bearings, all kinds of
wheel-based structures can be created. You can select the size of
your wheel – simply based on the length of the profile.

Precision model building: combitech system profiles

Square tubes and special profiles in the 7.5 mm series have been
specially designed for model building. Whether in the architecture

®
industry, the urban development sector or the automotive sector:
with the aid of the sophisticated combitech system, you can
®

quickly and effectively create presentable 3D models of your ideas.

Even delicate details such as stairs or fences can be easily created
with the sturdy, lightweight and versatile combitech system pro-
®

files made from aluminium. In combination with the many different

alfer sheet types, you can give your imagination free reign. Amaze
®

your audience!

Authentic special profiles

Whether crash barrier, sheet piling or container wall profiles – an
authentic look is a matter of course for alfer .
®

6
combitech system | Model construction
®

Range overview

Sophisticated through and through

Suitable system accessories

Useful accessory ideas make model building easier than ever. The
universal deburrer deburrs edges to make work easier and reduce
the risk of injury. Suitable screw sets plus blind and round-headed
rivets and double-sided adhesive tape provide reliable stability.

combitech system logika

® ®

The name says it all: the logika range offers logically perforated
®

profiles that prevent you from having to create your own holes.
They also sensibly complement the combitech system. With the
®

logika profiles you can build shelves, tables or steps in an instant.

The logika range is also the ideal solution for creating order in
®

rooms, delivery vans and construction site vehicles. Furthermore,

the logika system profiles look great when used to construct de-
®
combitech system | Model construction | 97032 | 01 2017 | 71708

signer furniture, for example in the form of sideboards, desks or

shelving solutions for modern living environments.
®

Discover the logika profile range and get to work right away. You
®

will be amazed at the speed at which logika profiles can create

attractive and highly sturdy results.

Lightweight construction: Plastic system profiles

The ultra-light alfer system profiles made from plastic (hard PVC)
®

are available with several cross-sections and ideal for the broadest
range of model building activities. The 7.5 mm system profiles come
with easy-to-use, patented drilling alignment groove – making them
ideal for accurate drilling and precisely aligned drill holes. Tip: the
profiles can be easily connected together with the aid of suitable
plastic adhesive. Any areas of dirt can be effortlessly cleaned using
a cloth and detergent or a special plastic cleaner.

7
combitech system | Model construction
®

Range overview

Available in five versions: Brass system profiles

Round tubes, round bars, brackets with equal members, flat bars
and square bars – these are the system profiles available in brass.

Harder than hard: Steel system profiles

The alfer model building range also offers you steel system pro-
®

files. Three different cross-section designs are available: round

tube, round bar and square bar

Completely solid: Metric threaded rods

Depending on requirements, alfer metric threaded rods are availa-
®

ble in stainless steel, brass and galvanised steel versions.

Various different finishes: Plain and embossed sheets, plastic

combitech system | Model construction | 97032 | 01 2017 | 71708

sheets, perforated sheets and expanded metal
The finish makes the difference! alfer offers you the perfect finish-
®

es for your project – in various different materials and structures.

Discover the astonishing diversity and give your model building pro-
jects the appearance you desire.

8
combitech system | Model construction
®

Range overview

connect connector 7.5 mm | Plastic (PA) 12 – 18

· 150º 3-D T-connector, 3 spigots · Articulated connector, 2 spigots PA
· 150º nodal connector, 4 spigots · Articulated flange connector, 1 spigot
· 150º square connector, 2 spigots · Bearing, 6 spigots
· 150º T-connector, 3 spigots · Cross connector, 4 spigots
· 45° 3-D T-connector, left, 3 spigots · End block
· 45° 3-D T-connector, right, 3 spigots · End cap
· 45º nodal connector, 4 spigots · Flange connector, 1 spigot
· 90º edge connector, 3 spigots · Nodal connector, 4 spigots
· 90º square connector, 2 spigots · Nodal connector, 5 spigots
· 90º T-connector, 3 spigots · Nodal connector, 6 spigots

System profiles | Aluminium 19 – 28

· Angle, equal-sided · Square tube, 2 branches inside ALU
· Angle, unequal-sided · Square tube, 2 branches offset
· Container wall profile · Square U
· Covering profile, one-sided · Square U, 2 branches 180º
· Covering profile, two-sided · Support profile, one-sided
· Flat bar · Support profile, two-sided
· Guard rail profile · T-profile
· H section
· Hinge profile
combitech system | Model construction | 97032 | 01 2017 | 71708

· Hinge profile, short

· Rectangular tube
®

· Rectangular U
· Round bar
· Round tube
· Sheet pile wall profile
· Square edge profile
· Square T
· Square tube
· Square tube, 1 branch
· Square tube, 1 branch offset
· Square tube, 2 branches 180º

System accessories 29 – 30
· Adhesive tape, double-sided ALU
· Blind rivet
· Countersunk screw set STA
· Round-headed rivet
· Universal deburrer

System profiles | logika 31

· Angle, equal-sided, slotted ALU

· Cylinder head screw set
ALX

STA

9
combitech system | Model construction
®

Range overview

System profiles | Plastic (hard PVC) 32 – 34

· Angle, equal-sided PVC
· Angle, unequal-sided
· Flat bar
· Rectangular tube
· Rectangular U
· Round tube
· Square T
· Square tube
· Square U

System profiles | Brass, solid 35 – 36

· Angle, equal-sided MES
· Flat bar
· Round bar
· Round tube
· Square bar

combitech system | Model construction | 97032 | 01 2017 | 71708

System profiles | Steel 37
· Round bar, drawn steel STA
· Round tube in cold rolled steel
· Square bar, drawn steel

®
Metric threaded rods 38
· Metric threaded rod EDL

STA

MES

Smooth and embossed sheets, plastic panels 39 – 42

· Barleycorn PC
· Checker plate
· Corrugated sheet ALU
· Plastic panel (PC, transparent)
ALX
· Sheet, aluminium, anodized
· Sheet, aluminium, coated ALP
· Sheet, aluminium, uncoated
· Sheet, raw steel STA
· Sheet, solid copper
· Sheet, stainless steel EDL
· Sheet, steel, galvanized
CU

10
combitech system | Model construction
®

Range overview

Perforated sheets and stretch metal 43 – 44

· Round hole sheet ALU
· Slotted hole sheet
· Square hole sheet ALX
· Stretch metal
ALP

STA

Explanations page 2

alfer makes you mobile IND-1

alfer ranges IND-2 – IND-3

®
combitech system | Model construction | 97032 | 01 2017 | 71708

Index | Product names A–Z IND-4

Index | Item number summary IND-5

Terms and Conditions of Supply and Payment IND-6

Available in a choice of colours IND-7

11
combitech system | Model construction
®

connect connector 7.5 mm | Plastic (PA)

90º square connector, 2 spigots PA

A B

Min. OU: 5 pcs.

Plastic (PA)
Colour Dim. a PU Packaging EAN / Item no.
A white 7.5 mm 4 pieces SS box 4001116 28520 2
B black 7.5 mm 4 pieces SS box 4001116 28500 4

90º edge connector, 3 spigots PA

A B

combitech system | Model construction | 97032 | 01 2017 | 71708

Min. OU: 5 pcs.

Plastic (PA)
Colour Dim. a PU Packaging EAN / Item no.

®
A white 7.5 mm 4 pieces SS box 4001116 28600 1
B black 7.5 mm 4 pieces SS box 4001116 28580 6

90º T-connector, 3 spigots PA

A B

Min. OU: 5 pcs.

Plastic (PA)
Colour Dim. a PU Packaging EAN / Item no.
A white 7.5 mm 4 pieces SS box 4001116 28560 8
B black 7.5 mm 4 pieces SS box 4001116 28540 0

12
combitech system | Model construction
®

connect connector 7.5 mm | Plastic (PA)

Cross connector, 4 spigots PA

A B

Min. OU: 5 pcs.

Plastic (PA)
Colour Dim. a PU Packaging EAN / Item no.
A white 7.5 mm 4 pieces SS box 4001116 28602 5
B black 7.5 mm 4 pieces SS box 4001116 28582 0

Nodal connector, 4 spigots PA

A B
combitech system | Model construction | 97032 | 01 2017 | 71708

Min. OU: 5 pcs.

Plastic (PA)
Colour Dim. a PU Packaging EAN / Item no.
A white 7.5 mm 4 pieces SS box 4001116 28640 7
B black 7.5 mm 4 pieces SS box 4001116 28620 9

Nodal connector, 5 spigots PA

A B

Min. OU: 5 pcs.

Plastic (PA)
Colour Dim. a PU Packaging EAN / Item no.
A white 7.5 mm 4 pieces SS box 4001116 28642 1
B black 7.5 mm 4 pieces SS box 4001116 28622 3

13
combitech system | Model construction
®

connect connector 7.5 mm | Plastic (PA)

Nodal connector, 6 spigots PA

A B

Min. OU: 5 pcs.

Plastic (PA)
Colour Dim. a PU Packaging EAN / Item no.
A white 7.5 mm 4 pieces SS box 4001116 28523 3
B black 7.5 mm 4 pieces SS box 4001116 28503 5

45° 3-D T-connector, left, 3 spigots PA

A B

combitech system | Model construction | 97032 | 01 2017 | 71708

Min. OU: 5 pcs.

Plastic (PA)
Colour Dim. a PU Packaging EAN / Item no.

®
A white 7.5 mm 4 pieces SS box 4001116 28521 9
B black 7.5 mm 4 pieces SS box 4001116 28501 1

45° 3-D T-connector, right, 3 spigots PA

A B

Min. OU: 5 pcs.

Plastic (PA)
Colour Dim. a PU Packaging EAN / Item no.
A white 7.5 mm 4 pieces SS box 4001116 28561 5
B black 7.5 mm 4 pieces SS box 4001116 28541 7

14
combitech system | Model construction
®

connect connector 7.5 mm | Plastic (PA)

45º nodal connector, 4 spigots PA

A B

Min. OU: 5 pcs.

Plastic (PA)
Colour Dim. a PU Packaging EAN / Item no.
A white 7.5 mm 4 pieces SS box 4001116 28601 8
B black 7.5 mm 4 pieces SS box 4001116 28581 3

Flange connector, 1 spigot PA

A B
combitech system | Model construction | 97032 | 01 2017 | 71708

Min. OU: 5 pcs.

Plastic (PA)
Colour Dim. a PU Packaging EAN / Item no.
A white 7.5 mm 4 pieces SS box 4001116 28522 6
B black 7.5 mm 4 pieces SS box 4001116 28502 8

Articulated flange connector, 1 spigot PA

A B

Min. OU: 5 pcs.

Plastic (PA)
Colour Dim. a PU Packaging EAN / Item no.
A white 7.5 mm 1 piece SS box 4001116 28562 2
B black 7.5 mm 2 pieces SS box 4001116 28542 4

15
combitech system | Model construction
®

connect connector 7.5 mm | Plastic (PA)

Articulated connector, 2 spigots PA

A B

Min. OU: 5 pcs.

Plastic (PA)
Colour Dim. a PU Packaging EAN / Item no.
A white 7.5 mm 2 pieces SS box 4001116 28641 4
B black 7.5 mm 2 pieces SS box 4001116 28621 6

Bearing, 6 spigots PA
A

combitech system | Model construction | 97032 | 01 2017 | 71708

Min. OU: 5 pcs.

Plastic (PA)
Colour Dim. a Dim. b PU Packaging EAN / Item no.

®
A black 36.2 mm 16.0 mm 1 piece SS box 4001116 28004 7

150º square connector, 2 spigots PA

Min. OU: 5 pcs.

Plastic (PA)
Colour Dim. a PU Packaging EAN / Item no.
A black 7.5 mm 3 pieces SS box 4001116 28000 9

16
combitech system | Model construction
®

connect connector 7.5 mm | Plastic (PA)

150º 3-D T-connector, 3 spigots PA

Min. OU: 5 pcs.

Plastic (PA)
Colour Dim. a PU Packaging EAN / Item no.
A black 7.5 mm 3 pieces SS box 4001116 28001 6

150º T-connector, 3 spigots PA

A
combitech system | Model construction | 97032 | 01 2017 | 71708

Min. OU: 5 pcs.

Plastic (PA)
Colour Dim. a PU Packaging EAN / Item no.
A black 7.5 mm 3 pieces SS box 4001116 28002 3

150º nodal connector, 4 spigots PA

Min. OU: 5 pcs.

Plastic (PA)
Colour Dim. a PU Packaging EAN / Item no.
A black 7.5 mm 3 pieces SS box 4001116 28003 0

17
combitech system | Model construction
®

connect connector 7.5 mm | Plastic (PA)

End cap PA
A

Min. OU: 5 pcs.

Plastic (PA)
Colour Dim. a PU Packaging EAN / Item no.
A black 7.5 mm 4 pieces SS box 4001116 28583 7

End block PA
A

combitech system | Model construction | 97032 | 01 2017 | 71708

Min. OU: 5 pcs.

Plastic (PA)
Colour Dim. a PU Packaging EAN / Item no.
A black 7.5 mm 4 pieces SS box 4001116 28543 1

18
combitech system | Model construction
®

System profiles | Aluminium

Square tube ALU

Min. OU: 5 pcs.

· Profiles with the unique drill alignment groove

Uncoated aluminium length: 1.00 m

Colour Dim. a Dim. b For Packaging EAN / Item no.
A uncoated 7.5 mm 1.0 mm M5 loose 4001116 25162 7

Square tube, 1 branch ALU

A
combitech system | Model construction | 97032 | 01 2017 | 71708

Min. OU: 5 pcs.

· Profiles with the unique drill alignment groove

Uncoated aluminium length: 1.00 m

Colour Dim. a Dim. b Dim. c For Packaging EAN / Item no.
A uncoated 7.5 mm 14.0 mm 1.0 mm M5 loose 4001116 25882 4

Square tube, 2 branches 180º ALU

Min. OU: 5 pcs.

· Profiles with the unique drill alignment groove

Uncoated aluminium length: 1.00 m

Colour Dim. a Dim. b Dim. c For Packaging EAN / Item no.
A uncoated 7.5 mm 20.5 mm 1.0 mm M5 loose 4001116 28669 8

19
combitech system | Model construction
®

System profiles | Aluminium

Square U, 2 branches 180º ALU

Min. OU: 5 pcs.

· Profiles with the unique drill alignment groove

Uncoated aluminium length: 1.00 m

Colour Dim. a Dim. b Dim. c Packaging EAN / Item no.
A uncoated 7.5 mm 20.5 mm 1.0 mm loose 4001116 25962 3

Square tube, 1 branch offset ALU

combitech system | Model construction | 97032 | 01 2017 | 71708

Min. OU: 5 pcs.

· Profiles with the unique drill alignment groove

Uncoated aluminium length: 1.00 m

Colour Dim. a Dim. b Dim. c Dim. d For Packaging EAN / Item no.
A uncoated 7.5 mm 14.0 mm 1.0 mm 4.5 mm M5 loose 4001116 28672 8

®
Square tube, 2 branches offset ALU
A

Min. OU: 5 pcs.

· Profiles with the unique drill alignment groove

Uncoated aluminium length: 1.00 m

Colour Dim. a Dim. b Dim. c Dim. d For Packaging EAN / Item no.
A uncoated 7.5 mm 14.0 mm 1.0 mm 4.5 mm M5 loose 4001116 26002 5

20
combitech system | Model construction
®

System profiles | Aluminium

Square tube, 2 branches inside ALU

Min. OU: 5 pcs.

· Profiles with the unique drill alignment groove

Uncoated aluminium length: 1.00 m

Colour Dim. a Dim. b Dim. c For Packaging EAN / Item no.
A uncoated 7.5 mm 14.0 mm 1.0 mm M5 loose 4001116 25922 7

Square edge profile ALU

A
combitech system | Model construction | 97032 | 01 2017 | 71708

Min. OU: 5 pcs.

· Profiles with the unique drill alignment groove

Uncoated aluminium length: 1.00 m

Colour Dim. a Dim. b Dim. c For Packaging EAN / Item no.
A uncoated 7.5 mm 14.0 mm 1.0 mm M5 loose 4001116 28673 5

H section ALU
A

Min. OU: 5 pcs.

· Profiles with the unique drill alignment groove

Uncoated aluminium length: 1.00 m

Colour Dim. a Dim. b Dim. c Packaging EAN / Item no.
A uncoated 7.5 mm 3.25 mm 1.0 mm loose 4001116 28670 4

21
combitech system | Model construction
®

System profiles | Aluminium

Flat bar ALU

Min. OU: 5 pcs.

· Profiles with the unique drill alignment groove

Uncoated aluminium length: 1.00 m

Colour Dim. a Dim. b Packaging EAN / Item no.
A uncoated 7.5 mm 1.5 mm loose 4001116 25802 2

Angle, equal-sided ALU

combitech system | Model construction | 97032 | 01 2017 | 71708

Min. OU: 5 pcs.

· Profiles with the unique drill alignment groove

Uncoated aluminium length: 1.00 m

Colour Dim. a Dim. b Packaging EAN / Item no.
A uncoated 7.5 mm 1.0 mm loose 4001116 25562 5

®
Angle, unequal-sided ALU
A

Min. OU: 5 pcs.

· Profiles with the unique drill alignment groove

Uncoated aluminium length: 1.00 m

Colour Dim. a Dim. b Dim. c Packaging EAN / Item no.
A uncoated 7.5 mm 12.5 mm 1.0 mm loose 4001116 25642 4

22
combitech system | Model construction
®

System profiles | Aluminium

Round tube ALU

Min. OU: 5 pcs.

· Profiles with the unique drill alignment groove

Uncoated aluminium length: 1.00 m

Colour Dim. a Dim. b For Packaging EAN / Item no.
A uncoated 7.5 mm 1.0 mm M5 loose 4001116 25002 6

Rectangular tube ALU

A
combitech system | Model construction | 97032 | 01 2017 | 71708

Min. OU: 5 pcs.

· Profiles with the unique drill alignment groove

Uncoated aluminium length: 1.00 m

Colour Dim. a Dim. b Dim. c For Packaging EAN / Item no.
A uncoated 7.5 mm 12.5 mm 1.0 mm M5 loose 4001116 25322 5

Round bar ALU

Min. OU: 5 pcs.

· Round rod, 5.3 mm, short, item No. 26062 (dim. d = 5.5 mm) can be
assembled on the hinge in combination with the hinge profile

Uncoated aluminium length: 1.00 m

Colour Dim. a Packaging EAN / Item no.
A uncoated 5.3 mm loose 4001116 28668 1
A uncoated 7.5 mm loose 4001116 25082 8

23
combitech system | Model construction
®

System profiles | Aluminium

Square U ALU
A

Min. OU: 5 pcs.

· Profiles with the unique drill alignment groove

Uncoated aluminium length: 1.00 m

Colour Dim. a Dim. b Packaging EAN / Item no.
A uncoated 7.5 mm 1.0 mm loose 4001116 25402 4
A uncoated 11.5 mm 1.5 mm loose 4001116 25404 8

Rectangular U ALU
A

combitech system | Model construction | 97032 | 01 2017 | 71708

Min. OU: 5 pcs.

· Profiles with the unique drill alignment groove

Uncoated aluminium length: 1.00 m

Colour Dim. a Dim. b Dim. c Packaging EAN / Item no.

®
A uncoated 7.5 mm 12.5 mm 1.0 mm loose 4001116 25482 6

Square T ALU
A

Min. OU: 5 pcs.

Uncoated aluminium length: 1.00 m

Colour Dim. a Dim. b Packaging EAN / Item no.
A uncoated 7.5 mm 1.0 mm loose 4001116 25722 3

24
combitech system | Model construction
®

System profiles | Aluminium

T-profile ALU
A

Min. OU: 5 pcs.

· Profiles with the unique drill alignment groove

Uncoated aluminium length: 1.00 m

Colour Dim. a Dim. b Dim. c Packaging EAN / Item no.
A uncoated 14.0 mm 7.5 mm 1.0 mm loose 4001116 28671 1

Hinge profile ALU

A
combitech system | Model construction | 97032 | 01 2017 | 71708

Min. OU: 5 pcs.

· Profiles with the unique drill alignment groove

Uncoated aluminium length: 1.00 m

Colour Dim. a Dim. b Dim. c For Packaging EAN / Item no.
A uncoated 29.5 mm 1.2 mm 10.0 mm M5 loose 4001116 27160 1

Hinge profile, short ALU

Min. OU: 5 pcs.

· Profiles with the unique drill alignment groove

Uncoated aluminium length: 1.00 m

Colour Dim. a Dim. b Dim. c Dim. d For Packaging EAN / Item no.
A uncoated 7.5 mm 12.5 mm 1.5 mm 5.5 mm M5 loose 4001116 26062 9

25
combitech system | Model construction
®

System profiles | Aluminium

Guard rail profile ALU

Min. OU: 5 pcs.

· Profiles with the unique drill alignment groove

· The profile can easily be bent around curves

Uncoated aluminium length: 1.00 m

Colour Dim. a Dim. b Dim. c Packaging EAN / Item no.
A uncoated 6.2 mm 21.0 mm 0.75 mm loose 4001116 28667 4

Sheet pile wall profile ALU

combitech system | Model construction | 97032 | 01 2017 | 71708

Min. OU: 5 pcs.

· Profiles cut to dimension and placed next to each other

· Easy and reliable edging using our 11.5-mm U profile

Uncoated aluminium length: 1.00 m

Colour Dim. a Dim. b Dim. c Packaging EAN / Item no.
A uncoated 31.4 mm 8.4 mm 1.2 mm loose 4001116 28666 7

®
Container wall profile ALU
A

Min. OU: 5 pcs.

· Profiles with the unique drill alignment groove

Uncoated aluminium length: 1.00 m

Colour Dim. a Dim. b Dim. c Packaging EAN / Item no.
A uncoated 68.5 mm 5.4 mm 1.2 mm loose 4001116 28665 0

26
combitech system | Model construction
®

System profiles | Aluminium

Support profile, one-sided ALU

Min. OU: 5 pcs.

· Profiles with the unique drill alignment groove

Uncoated aluminium length: 1.00 m

Colour Dim. a Dim. b Dim. c Packaging EAN / Item no.
A uncoated 19.5 mm 1.2 mm 10.0 mm loose 4001116 27080 2

Support profile, two-sided ALU

A
combitech system | Model construction | 97032 | 01 2017 | 71708

Min. OU: 5 pcs.

· Profiles with the unique drill alignment groove

Uncoated aluminium length: 1.00 m

Colour Dim. a Dim. b Dim. c Packaging EAN / Item no.
A uncoated 29.5 mm 1.2 mm 10.0 mm loose 4001116 27100 7

Covering profile, two-sided ALU

Min. OU: 5 pcs.

· Profiles with the unique drill alignment groove

Uncoated aluminium length: 1.00 m

Colour Dim. a Packaging EAN / Item no.
A uncoated 29.5 mm loose 4001116 27060 4

27
combitech system | Model construction
®

System profiles | Aluminium

Covering profile, one-sided ALU

Min. OU: 5 pcs.

· Profiles with the unique drill alignment groove

Uncoated aluminium length: 1.00 m

Colour Dim. a Packaging EAN / Item no.
A uncoated 19.5 mm loose 4001116 27040 6

combitech system | Model construction | 97032 | 01 2017 | 71708

28
combitech system | Model construction
®

System accessories

Countersunk screw set STA

Min. OU: 5 pcs.

Galvanized steel
Screw size Length PU Packaging EAN / Item no.
A M2 4.0 mm 20 pieces each, SS box 4001116 28684 1
A M2 6.0 mm 20 pieces each, SS box 4001116 28683 4
A M2 8.0 mm 20 pieces each, SS box 4001116 28685 8

Blind rivet ALU

A
combitech system | Model construction | 97032 | 01 2017 | 71708
®

Min. OU: 5 pcs.

Uncoated aluminium
Colour Dim. Length PU Packaging EAN / Item no.
A uncoated 2.4 mm 4.0 mm 20 pieces SS box 4001116 28680 3
A uncoated 2.4 mm 6.0 mm 20 pieces SS box 4001116 28681 0

Round-headed rivet ALU

Min. OU: 5 pcs.

Uncoated aluminium
Colour Dim. Length PU Packaging EAN / Item no.
A uncoated 1.5 mm 8.0 mm 20 pieces SS box 4001116 28682 7

29
combitech system | Model construction
®

System accessories

Adhesive tape, double-sided

Min. OU: 5 pcs.

length: 25.00 m
Width Packaging EAN / Item no.
A 6.0 mm shrink-wrapped SS 4001116 28686 5

Universal deburrer
A

combitech system | Model construction | 97032 | 01 2017 | 71708

Min. OU: 5 pcs.

· Deburred edges prevent injuries

· Makes it easier to insert the connect connectors

Colour Packaging EAN / Item no.

A blue SS box 4001116 28661 2

30
combitech system | Model construction
®

System profiles | logika

Angle, equal-sided, slotted ALU

Min. OU: 5 pcs.

· The logically perforated profile range

Uncoated aluminium length: 1.00 m

Colour Dim. a Dim. b Packaging EAN / Item no.
A uncoated 7.5 mm 1.0 mm loose 4001116 23031 8
A uncoated 15.5 mm 1.5 mm loose 4001116 23021 9

Angle, equal-sided, slotted ALX

A
combitech system | Model construction | 97032 | 01 2017 | 71708

Min. OU: 5 pcs.

· The logically perforated profile range

Anodized aluminium length: 1.00 m

Colour Dim. a Dim. b Packaging EAN / Item no.
A titanium 7.5 mm 1.0 mm loose 4001116 23331 9
A titanium 15.5 mm 1.5 mm loose 4001116 23321 0

Cylinder head screw set STA

Min. OU: 5 pcs.

Galvanized steel
Colour Screw size Length PU Packaging EAN / Item no.
A galvanized M2 5.0 mm 20 pieces each, SS box 4001116 39480 5
A galvanized M3 8.0 mm 20 pieces each, SS box 4001116 39481 2

31
combitech system | Model construction
®

System profiles | Plastic (hard PVC)

Flat bar PVC

Min. OU: 5 pcs.

· Profiles with the unique drill alignment groove

Plastic (hard PVC) length: 1.00 m

Colour Dim. a Dim. b Packaging EAN / Item no.
A white 7.5 mm 1.5 mm loose 4001116 21842 2

Angle, equal-sided PVC

combitech system | Model construction | 97032 | 01 2017 | 71708

Min. OU: 5 pcs.

· Profiles with the unique drill alignment groove

Plastic (hard PVC) length: 1.00 m

Colour Dim. a Dim. b Packaging EAN / Item no.
A white 7.5 mm 1.0 mm loose 4001116 21602 2

®
Angle, unequal-sided PVC
A

Min. OU: 5 pcs.

· Profiles with the unique drill alignment groove

Plastic (hard PVC) length: 1.00 m

Colour Dim. a Dim. b Dim. c Packaging EAN / Item no.
A white 7.5 mm 12.5 mm 1.0 mm loose 4001116 21682 4

32
combitech system | Model construction
®

System profiles | Plastic (hard PVC)

Round tube PVC

Min. OU: 5 pcs.

· Profiles with the unique drill alignment groove

Plastic (hard PVC) length: 1.00 m

Colour Dim. a Dim. b For Packaging EAN / Item no.
A white 7.5 mm 1.0 mm M5 loose 4001116 21042 6

Square tube PVC

A
combitech system | Model construction | 97032 | 01 2017 | 71708

Min. OU: 5 pcs.

· Profiles with the unique drill alignment groove

Plastic (hard PVC) length: 1.00 m

Colour Dim. a Dim. b For Packaging EAN / Item no.
A white 7.5 mm 1.0 mm M5 loose 4001116 21202 4

Rectangular tube PVC

Min. OU: 5 pcs.

· Profiles with the unique drill alignment groove

Plastic (hard PVC) length: 1.00 m

Colour Dim. a Dim. b Dim. c For Packaging EAN / Item no.
A white 7.5 mm 12.5 mm 1.0 mm M5 loose 4001116 21362 5

33
combitech system | Model construction
®

System profiles | Plastic (hard PVC)

Square U PVC
A

Min. OU: 5 pcs.

· Profiles with the unique drill alignment groove

Plastic (hard PVC) length: 1.00 m

Colour Dim. a Dim. b Packaging EAN / Item no.
A white 7.5 mm 1.0 mm loose 4001116 21442 4

Rectangular U PVC
A

combitech system | Model construction | 97032 | 01 2017 | 71708

Min. OU: 5 pcs.

· Profiles with the unique drill alignment groove

Plastic (hard PVC) length: 1.00 m

Colour Dim. a Dim. b Dim. c Packaging EAN / Item no.
A white 7.5 mm 12.5 mm 1.0 mm loose 4001116 21522 3

®
Square T PVC
A

Min. OU: 5 pcs.

Plastic (hard PVC) length: 1.00 m

Colour Dim. a Dim. b Packaging EAN / Item no.
A white 7.5 mm 1.0 mm loose 4001116 21762 3

34
combitech system | Model construction
®

System profiles | Brass, solid

Flat bar MES

Min. OU: 5 pcs.

Solid brass length: 1.00 m

Colour Dim. a Dim. b Packaging EAN / Item no.
A brass 7.0 mm 2.5 mm loose 4001116 20210 0

Angle, equal-sided MES

A
combitech system | Model construction | 97032 | 01 2017 | 71708

Min. OU: 5 pcs.

Solid brass length: 1.00 m

Colour Dim. a Dim. b Dim. c Packaging EAN / Item no.
A brass 10.0 mm 10.0 mm 1.0 mm loose 4001116 20240 7

Round tube MES

Min. OU: 5 pcs.

Solid brass length: 1.00 m

Colour Dim. a Dim. b Packaging EAN / Item no.
A brass 2.0 mm 0.3 mm loose 4001116 20220 9
A brass 4.0 mm 0.5 mm loose 4001116 20221 6
A brass 6.0 mm 0.5 mm loose 4001116 20222 3

35
combitech system | Model construction
®

System profiles | Brass, solid

Round bar MES

Min. OU: 5 pcs.

Solid brass length: 1.00 m

Colour Dim. a Packaging EAN / Item no.
A brass 1.3 mm loose 4001116 20233 9
A brass 2.9 mm loose 4001116 20234 6
A brass 4.0 mm loose 4001116 20230 8

Square bar MES

combitech system | Model construction | 97032 | 01 2017 | 71708

Min. OU: 5 pcs.

Solid brass length: 1.00 m

®
Colour Dim. a Dim. b Packaging EAN / Item no.
A brass 5.0 mm 5.0 mm loose 4001116 20280 3

36
combitech system | Model construction
®

System profiles | Steel

Round tube in cold rolled steel STA

Min. OU: 5 pcs.

Steel, cold-rolled length: 1.00 m

Colour Dim. a Dim. b Packaging EAN / Item no.
A steel grey 6.0 mm 1.0 mm loose 4001116 34330 8

Round bar, drawn steel STA

A
combitech system | Model construction | 97032 | 01 2017 | 71708

Min. OU: 5 pcs.

Steel, drawn length: 1.00 m

Colour Dim. a Packaging EAN / Item no.
A steel grey 4.0 mm loose 4001116 34460 2
A steel grey 5.0 mm loose 4001116 34461 9
A steel grey 6.0 mm loose 4001116 34462 6

Square bar, drawn steel STA

Min. OU: 5 pcs.

Steel, drawn length: 1.00 m

Colour Dim. a Dim. b Packaging EAN / Item no.
A steel grey 4.0 mm 4.0 mm loose 4001116 34470 1

37
combitech system | Model construction
®

Metric threaded rods

Metric threaded rod EDL

Min. OU: 5 pcs.

Stainless steel V2A length: 1.00 m

Colour Dim. Packaging EAN / Item no.
A stainless steel M3 loose 4001116 30020 2
A stainless steel M4 loose 4001116 30021 9
A stainless steel M5 loose 4001116 30022 6

Metric threaded rod MES

combitech system | Model construction | 97032 | 01 2017 | 71708

Min. OU: 5 pcs.

Solid brass length: 1.00 m

®
Colour Dim. Packaging EAN / Item no.
A brass M3 loose 4001116 30030 1
A brass M4 loose 4001116 30031 8
A brass M5 loose 4001116 30032 5

Metric threaded rod STA

Min. OU: 5 pcs.

Galvanized steel length: 1.00 m

Colour Dim. Packaging EAN / Item no.
A galvanized M3 loose 4001116 30000 4
A galvanized M4 loose 4001116 30001 1
A galvanized M5 loose 4001116 30002 8

38
combitech system | Model construction
®

Smooth and embossed sheets, plastic panels

Plastic panel (PC, transparent) PC

Min. OU: 5 pcs.

Plastic (PC)
Colour Thickness Width Long Packaging EAN / Item no.
A transparent 1.0 mm 250.0 mm 500.0 mm loose 4001116 38354 0

Sheet, aluminium, uncoated ALU

A
combitech system | Model construction | 97032 | 01 2017 | 71708

Min. OU: 5 pcs.

Uncoated aluminium
Colour Thickness Width Long Packaging EAN / Item no.
A uncoated 0.3 mm 250.0 mm 500.0 mm sealed 4001116 38264 2
A uncoated 0.5 mm 250.0 mm 500.0 mm sealed 4001116 38274 1
A uncoated 0.8 mm 250.0 mm 500.0 mm sealed 4001116 37004 5
A uncoated 1.5 mm 250.0 mm 500.0 mm sealed 4001116 37554 5

Sheet, aluminium, anodized ALX

Min. OU: 5 pcs.

Anodized aluminium
Colour Thickness Width Long Packaging EAN / Item no.
A stainless steel visual effect 0.5 mm 250.0 mm 500.0 mm foil-wrapped, one-sided 4001116 38204 8

39
combitech system | Model construction
®

Smooth and embossed sheets, plastic panels

Sheet, aluminium, coated ALP

A B C D E

Min. OU: 5 pcs.

Powder-coated aluminium
Colour Thickness Width Long Packaging EAN / Item no.
A granite-red 0.8 mm 250.0 mm 500.0 mm sealed 4001116 38524 7
B granite-white 0.8 mm 250.0 mm 500.0 mm sealed 4001116 38574 2
C maple 0.8 mm 250.0 mm 500.0 mm sealed 4001116 38534 6
D beech 0.8 mm 250.0 mm 500.0 mm sealed 4001116 38544 5
E white 0.8 mm 250.0 mm 500.0 mm sealed 4001116 38504 9

combitech system | Model construction | 97032 | 01 2017 | 71708

Sheet, raw steel STA
A

Min. OU: 5 pcs.

®
Raw steel
Colour Thickness Width Long Packaging EAN / Item no.
A raw 0.75 mm 250.0 mm 500.0 mm sealed 4001116 38104 1

Sheet, steel, galvanized STA

Min. OU: 5 pcs.

Galvanized steel
Colour Thickness Width Long Packaging EAN / Item no.
A galvanized 0.5 mm 250.0 mm 500.0 mm sealed 4001116 38054 9

40
combitech system | Model construction
®

Smooth and embossed sheets, plastic panels

Sheet, stainless steel EDL

Min. OU: 5 pcs.

Stainless steel
Colour Thickness Width Long Packaging EAN / Item no.
A stainless steel 0.5 mm 250.0 mm 500.0 mm sealed 4001116 38254 3

Sheet, solid copper CU

A
combitech system | Model construction | 97032 | 01 2017 | 71708

Min. OU: 5 pcs.

Solid copper
Colour Thickness Width Long Packaging EAN / Item no.
A copper 0.5 mm 250.0 mm 500.0 mm sealed 4001116 38154 6

Barleycorn ALU
A

Min. OU: 5 pcs.

Uncoated aluminium
Colour Thickness min. Thickness max. Width Long Packaging EAN / Item no.
A uncoated 1.5 mm 2.0 mm 250.0 mm 500.0 mm loose 4001116 38284 0

41
combitech system | Model construction
®

Smooth and embossed sheets, plastic panels

Checker plate ALU

Min. OU: 5 pcs.

Uncoated aluminium
Colour Thickness min. Thickness max. Width Long Packaging EAN / Item no.
A uncoated 1.5 mm 2.0 mm 250.0 mm 500.0 mm loose 4001116 37154 7

Corrugated sheet ALU

combitech system | Model construction | 97032 | 01 2017 | 71708

Min. OU: 5 pcs.

Uncoated aluminium
Colour Thickness min. Thickness max. Dim. b Width Long Packaging EAN / Item no.
A uncoated 1.0 mm 2.0 mm 9.5 mm 250.0 mm 500.0 mm loose 4001116 38294 9

42
combitech system | Model construction
®

Perforated sheets and stretch metal

Slotted hole sheet ALX

Min. OU: 5 pcs.

Anodized aluminium
Colour Thickness Dim. a Dim. b Width Long Packaging EAN / Item no.
A silver 0.7 mm 1.5 mm 20.0 mm 250.0 mm 500.0 mm sealed 4001116 37264 3

Round hole sheet ALX

A
combitech system | Model construction | 97032 | 01 2017 | 71708

Min. OU: 5 pcs.

Anodized aluminium
Colour Thickness Dim. a Dim. b Width Long Packaging EAN / Item no.
A silver 0.7 mm 1.5 mm 3.0 mm 250.0 mm 500.0 mm sealed 4001116 37364 0
A silver 0.7 mm 4.0 mm 6.0 mm 250.0 mm 500.0 mm sealed 4001116 37414 2

Square hole sheet ALX

Min. OU: 5 pcs.

Anodized aluminium
Colour Thickness Dim. a Dim. b Width Long Packaging EAN / Item no.
A silver 0.7 mm 8.0 mm 12.0 mm 250.0 mm 500.0 mm sealed 4001116 37314 5

43
combitech system | Model construction
®

Perforated sheets and stretch metal

Stretch metal ALP

Min. OU: 5 pcs.

Powder-coated aluminium
Colour Thickness Dim. a Dim. b Width Long Packaging EAN / Item no.
A black 1.6 mm 10.0 mm 5.0 mm 250.0 mm 500.0 mm sealed 4001116 37524 8

Stretch metal ALU

combitech system | Model construction | 97032 | 01 2017 | 71708

Min. OU: 5 pcs.

Uncoated aluminium
Colour Thickness Dim. a Dim. b Width Long Packaging EAN / Item no.
A uncoated 1.6 mm 10.0 mm 5.0 mm 250.0 mm 500.0 mm sealed 4001116 37464 7

®
Stretch metal STA
A

Min. OU: 5 pcs.

Raw steel
Colour Thickness Dim. a Dim. b Width Long Packaging EAN / Item no.
A raw 1.2 mm 6.0 mm 3.5 mm 250.0 mm 500.0 mm sealed 4001116 37604 7
A raw 2.2 mm 10.0 mm 5.8 mm 250.0 mm 500.0 mm sealed 4001116 37654 2
A raw 2.8 mm 16.0 mm 8.0 mm 250.0 mm 500.0 mm sealed 4001116 37704 4

44
combitech system | Model construction
®

Index

alfer makes you mobile

Information about alfer and the full product range plus plenty of other useful information can be found online. Our website is also optimised for mobile
®

devices and tablets. Wherever you are, you can find what you are you looking for – quickly and clearly.
combitech system | Model construction | 97032 | 01 2017 | 71708
®

Start browsing and get enjoying!

The complete product catalogue can also be downloaded in PDF format from our website www.alfer.com, where you will also find many other use-
ful services and suggestions in relation to the fascinating alfer product world.
®

For example, look forward to plenty of practical tips and tricks for existing and budding DIY enthusiasts. Get inspiration from our refined building ide-
as. Use our comprehensive download area to obtain catalogues, brochures and building instructions. And make sure you take a look at our helpful
application and product videos. They are well worth watching!

We look forward to your visit to www.alfer.com

IND-1
combitech system | Model construction
®

Index

alfer ranges
®

combitech system | Basis

Everything fits together:

The combitech system: flexibly combinable. One product highlight is the typical drill alignment groove
®

– just one of many practical ideas from alfer . For example, this marks the opposite sides of a round-
®

ed pipe making vertical drilling through the middle easy. The Basis range from combitech comprises
®

standard aluminium and plastic profiles such as pipes, brackets, square tubes and much, much more.

combitech system | connect 23.5 mm

The combitech connect connectors can be used to simply connect 23.5 mm square tubes. Whether
®

frames, shelves or anything else you wish to build, the stable polyamide connectors hold everything to-
gether. The connectors are available in two colours: black and white.

combitech system | Sheets, plates and accessories

A huge selection of sheets provides the right product for many applications. The alfer sheets come in
®

many different thicknesses and materials. Multiple different finish options are also available from functional

combitech system | Model construction | 97032 | 01 2017 | 71708

to decorative.

Prismatech and Multitube:

The profiles for framing and stabilising the sheets are particularly practical. alfer offers clever options to
®

this end through Prismatech and Multitube.

combitech system | logika

® ®

logika is a new addition to the combitech systems in the form of a logically perforated profile. logika
® ® ®

profiles enable you to build shelves, tables, steps, and much more. This will enable you to create order
in rooms or vehicles. The holes in the profiles are made in such a way that they are as small as possible
but as big as necessary to ensure high stability and so that, for example, at least three brackets will fit on
top of each other and a further bracket can be screwed in place vertically to the others. The profiles are

®
particularly suited for use in cold-storage rooms, cellars and wet areas.

Profiles for DIY and professional purposes

Flat bars, brackets with even and uneven branches, U-profiles, round bars, rectangular tubes and a whole
range of other profiles. These form the basis for you to turn your ideas into reality. The classic semi-finished
products for DIY enthusiasts and professionals are made from aluminium with anodised or untreated
finishes, as well as many other materials.

Steel profiles
Steel is the most commonly used metallic material and offers an array of impressive benefits: high tensile
strength, good malleability and thermal conductivity. The noteworthy material strength and rigidity ensure
optimum stability. Furthermore, steel is extremely easy to work and resource-conserving as it can be re-
cycled without any loss of quality. alfer steel profiles are available as flat, angle, U, T, round and square
®

profiles and tubes as well as in the form of sectional steel and wide-flanged beams.

combitech system | Model construction

alfer has a special place in its heart for model builders. Model builders can therefore also acquire
®

combitech connect connectors for 7.5 mm profiles. Numerous special shapes such as the 150° angle
®

connector are also available. The popular benefits such as the drill alignment groove and the easy-to-
combine dimensions also prove their worth in the model construction range.

Discover the full diversity of the model construction range in the online shop: www.alfer-shop.com

IND-2
combitech system | Model construction
®

Index

alfer ranges
®

combitech system | coaxis

® ®

A further addition to the combitech system is the coaxis profile. This consists of four hollow chambers
® ®

coaxially located around the core. The special design of the aluminium profiles ensure excellent longitu-
dinal and lateral stability with the lowest weight. Equipped with drill alignment holes, the profiles are ex-
tremely simple to use and the angle bracket and hook can even be installed without drilling, using simply
a square nut and screw. The profiles are ideal for use in damp areas and can even be used in the garden
thanks to their weather-resistance.

Storage range
The broad version of the coaxis profile can be horizontally, vertically and diagonally attached to walls and
®

ceilings, allowing you to make optimal use of the available space. With the right hook, everything finds a
place, whether indoors or out. Whether in the garden, the garage, the cellar or the attic: everything can
be securely stored. The rubber caps on the hooks ensure that nothing gets scratched. The coaxis hooks
®

are available in aluminium or galvanised steel. The alfer bicycle stand is made of lightweight, weather-re-
®

sistant aluminium. It is suitable for all bikes, from racing bikes and city bikes to mountain bikes. It comes
either as a rigid or an infinitely adjustable version, individually or as a three-piece set.

Tile edgings
Clean edges and finishes with aluminium profiles.Whether you lay your tiles yourself or have them laid by a
specialist, there is one important ‘side issue’ that you should never forget. The alfer profiles can be used
®
combitech system | Model construction | 97032 | 01 2017 | 71708

on corners and edges, transitions between floor coverings and stairways. Clean edges and transitions not
only look good but are also hygienic as they prevent any fraying or scuffing and improve water-resistance.
®

Floor and room profiles

Transitions between different floor coverings, a clean and protective edging or stair edges, all available in
a whole range of colours, materials and décors. The stair profiles provide safety and particularly protect
textile coverings against scuffing on the edges, ensuring they retain their visual appeal for many years.
The profiles are extremely colour stable and completely crush-proof. For minor damage to aged stairs,
alfer offers stair repair brackets for simple restoration. alfer door sealing brushes simply and effec-
® ®

tively prevent drafts.

Profiles for parquet, laminate and designer floors

Perfectly laid parquet and laminate floorboards the easy wayThe ease of laying ready-to-install parquet,
cork and laminate floorboards makes them extremely popular with DIY enthusiasts. And anyone who appre-
ciates this feature will love the parquet and laminate profiles from alfer . With clipstech , clipstech -var-
® ® ®

io and clipstech -plus, you have the perfect profiles for edges and transitions between floor coverings.
®

The edges are therefore cleanly sealed and stumbling hazards are prevented. The clipstech profiles are
®

installed so that no screws are subsequently visible. The cover is simply clipped on.

cabelino baseboards
®

Baseboards are ideal for concealing retrospectively laid cables and lines. The cabelino baseboards
®

have been designed for precisely this purpose. The baseboards are TÜV-certified and comply with the
latest safety regulations. The décors of the baseboards match those of the clipstech range. cabelino
® ®

baseboards are also noteworthy from a technical perspective. Thanks to the lock or clamp gap, they can
be infinitely adjusted by up to 10 mm so that the baseboard can simply be pressed down if the floor set-
tles over the years.

IND-3
combitech system | Model construction
®

Index

Product names A–Z

150º 3-D T-connector, 3 spigots ......................................................................................17 Nodal connector, 6 spigots...............................................................................................14
150º nodal connector, 4 spigots .......................................................................................17 Plastic panel (PC, transparent) .........................................................................................39
150º square connector, 2 spigots .....................................................................................16 Rectangular tube........................................................................................................23 | 33
150º T-connector, 3 spigots .............................................................................................17 Rectangular U ............................................................................................................24 | 34
45° 3-D T-connector, left, 3 spigots .................................................................................14 Round bar ..................................................................................................................23 | 36
45° 3-D T-connector, right, 3 spigots ...............................................................................14 Round bar, drawn steel.....................................................................................................37
45º nodal connector, 4 spigots .........................................................................................15 Round hole sheet ..............................................................................................................43
90º edge connector, 3 spigots ..........................................................................................12 Round tube ......................................................................................................... 23 | 33 | 35
90º square connector, 2 spigots .......................................................................................12 Round tube in cold rolled steel .........................................................................................37
90º T-connector, 3 spigots ...............................................................................................12 Round-headed rivet ..........................................................................................................29
Adhesive tape, double-sided ............................................................................................30 Sheet pile wall profile ........................................................................................................26
Angle, equal-sided .............................................................................................. 22 | 32 | 35 Sheet, aluminium, anodized..............................................................................................39
Angle, equal-sided, slotted ...............................................................................................31 Sheet, aluminium, coated .................................................................................................40
Angle, unequal-sided .................................................................................................22 | 32 Sheet, aluminium, uncoated .............................................................................................39
Articulated connector, 2 spigots .......................................................................................16 Sheet, raw steel ................................................................................................................40
Articulated flange connector, 1 spigot ..............................................................................15 Sheet, solid copper ...........................................................................................................41
Barleycorn .........................................................................................................................41 Sheet, stainless steel ........................................................................................................41
Bearing, 6 spigots .............................................................................................................16 Sheet, steel, galvanized ....................................................................................................40
Blind rivet ..........................................................................................................................29 Slotted hole sheet .............................................................................................................43
Checker plate ....................................................................................................................42 Square bar ........................................................................................................................36
Container wall profile ........................................................................................................26 Square bar, drawn steel ....................................................................................................37
Corrugated sheet ..............................................................................................................42 Square edge profile...........................................................................................................21
Countersunk screw set .....................................................................................................29 Square hole sheet .............................................................................................................43
Covering profile, one-sided...............................................................................................28 Square T.....................................................................................................................24 | 34
Covering profile, two-sided...............................................................................................27 Square tube ...............................................................................................................19 | 33
Cross connector, 4 spigots...............................................................................................13 Square tube, 1 branch ......................................................................................................19
Cylinder head screw set ...................................................................................................31 Square tube, 1 branch offset ............................................................................................20
End block ..........................................................................................................................18 Square tube, 2 branches 180º ..........................................................................................19
End cap .............................................................................................................................18 Square tube, 2 branches inside ........................................................................................21

combitech system | Model construction | 97032 | 01 2017 | 71708

Flange connector, 1 spigot ...............................................................................................15 Square tube, 2 branches offset ........................................................................................20
Flat bar ................................................................................................................ 22 | 32 | 35 Square U ....................................................................................................................24 | 34
Guard rail profile ...............................................................................................................26 Square U, 2 branches 180º ...............................................................................................20
H section ...........................................................................................................................21 Stretch metal.....................................................................................................................44
Hinge profile ......................................................................................................................25 Support profile, one-sided ................................................................................................27
Hinge profile, short............................................................................................................25 Support profile, two-sided ................................................................................................27
Metric threaded rod ..........................................................................................................38 T-profile .............................................................................................................................25
Nodal connector, 4 spigots...............................................................................................13 Universal deburrer.............................................................................................................30
Nodal connector, 5 spigots...............................................................................................13

IND-4
combitech system | Model construction
®

Index

Item number summary

20210 Flat bar ..................................................................................................................35 28682 Round-headed rivet ..............................................................................................29
20220 Round tube ...........................................................................................................35 28683 Countersunk screw set .........................................................................................29
20221 Round tube ...........................................................................................................35 28684 Countersunk screw set .........................................................................................29
20222 Round tube ...........................................................................................................35 28685 Countersunk screw set .........................................................................................29
20230 Round bar .............................................................................................................36 28686 Adhesive tape, double-sided ................................................................................30
20233 Round bar .............................................................................................................36 30000 Metric threaded rod ..............................................................................................38
20234 Round bar .............................................................................................................36 30001 Metric threaded rod ..............................................................................................38
20240 Angle, equal-sided ................................................................................................35 30002 Metric threaded rod ..............................................................................................38
20280 Square bar ............................................................................................................36 30020 Metric threaded rod ..............................................................................................38
21042 Round tube ...........................................................................................................33 30021 Metric threaded rod ..............................................................................................38
21202 Square tube...........................................................................................................33 30022 Metric threaded rod ..............................................................................................38
21362 Rectangular tube ...................................................................................................33 30030 Metric threaded rod ..............................................................................................38
21442 Square U ...............................................................................................................34 30031 Metric threaded rod ..............................................................................................38
21522 Rectangular U .......................................................................................................34 30032 Metric threaded rod ..............................................................................................38
21602 Angle, equal-sided ................................................................................................32 34330 Round tube in cold rolled steel .............................................................................37
21682 Angle, unequal-sided ............................................................................................32 34460 Round bar, drawn steel .........................................................................................37
21762 Square T ................................................................................................................34 34461 Round bar, drawn steel .........................................................................................37
21842 Flat bar ..................................................................................................................32 34462 Round bar, drawn steel .........................................................................................37
23021 Angle, equal-sided, slotted ...................................................................................31 34470 Square bar, drawn steel ........................................................................................37
23031 Angle, equal-sided, slotted ...................................................................................31 37004 Sheet, aluminium, uncoated .................................................................................39
23321 Angle, equal-sided, slotted ...................................................................................31 37154 Checker plate ........................................................................................................42
23331 Angle, equal-sided, slotted ...................................................................................31 37264 Slotted hole sheet .................................................................................................43
25002 Round tube ...........................................................................................................23 37314 Square hole sheet .................................................................................................43
25082 Round bar .............................................................................................................23 37364 Round hole sheet ..................................................................................................43
25162 Square tube...........................................................................................................19 37414 Round hole sheet ..................................................................................................43
25322 Rectangular tube ...................................................................................................23 37464 Stretch metal .........................................................................................................44
25402 Square U ...............................................................................................................24 37524 Stretch metal .........................................................................................................44
25404 Square U ...............................................................................................................24 37554 Sheet, aluminium, uncoated .................................................................................39
25482 Rectangular U .......................................................................................................24 37604 Stretch metal .........................................................................................................44
combitech system | Model construction | 97032 | 01 2017 | 71708

25562 Angle, equal-sided ................................................................................................22 37654 Stretch metal .........................................................................................................44

25642 Angle, unequal-sided ............................................................................................22 37704 Stretch metal .........................................................................................................44
25722 Square T ................................................................................................................24 38054 Sheet, steel, galvanized ........................................................................................40
25802 Flat bar ..................................................................................................................22 38104 Sheet, raw steel ....................................................................................................40
®

25882 Square tube, 1 branch ..........................................................................................19 38154 Sheet, solid copper ...............................................................................................41
25922 Square tube, 2 branches inside ............................................................................21 38204 Sheet, aluminium, anodized ..................................................................................39
25962 Square U, 2 branches 180º ...................................................................................20 38254 Sheet, stainless steel ............................................................................................41
26002 Square tube, 2 branches offset.............................................................................20 38264 Sheet, aluminium, uncoated .................................................................................39
26062 Hinge profile, short ................................................................................................25 38274 Sheet, aluminium, uncoated .................................................................................39
27040 Covering profile, one-sided...................................................................................28 38284 Barleycorn .............................................................................................................41
27060 Covering profile, two-sided ...................................................................................27 38294 Corrugated sheet ..................................................................................................42
27080 Support profile, one-sided ....................................................................................27 38354 Plastic panel (PC, transparent)..............................................................................39
27100 Support profile, two-sided ....................................................................................27 38504 Sheet, aluminium, coated .....................................................................................40
27160 Hinge profile ..........................................................................................................25 38524 Sheet, aluminium, coated .....................................................................................40
28000 150º square connector, 2 spigots .........................................................................16 38534 Sheet, aluminium, coated .....................................................................................40
28001 150º 3-D T-connector, 3 spigots ..........................................................................17 38544 Sheet, aluminium, coated .....................................................................................40
28002 150º T-connector, 3 spigots .................................................................................17 38574 Sheet, aluminium, coated .....................................................................................40
28003 150º nodal connector, 4 spigots ...........................................................................17 39480 Cylinder head screw set........................................................................................31
28004 Bearing, 6 spigots .................................................................................................16 39481 Cylinder head screw set........................................................................................31
28500 90º square connector, 2 spigots ...........................................................................12
28501 45° 3-D T-connector, left, 3 spigots .....................................................................14
28502 Flange connector, 1 spigot ...................................................................................15
28503 Nodal connector, 6 spigots ...................................................................................14
28520 90º square connector, 2 spigots ...........................................................................12
28521 45° 3-D T-connector, left, 3 spigots .....................................................................14
28522 Flange connector, 1 spigot ...................................................................................15
28523 Nodal connector, 6 spigots ...................................................................................14
28540 90º T-connector, 3 spigots ...................................................................................12
28541 45° 3-D T-connector, right, 3 spigots ...................................................................14
28542 Articulated flange connector, 1 spigot ..................................................................15
28543 End block ..............................................................................................................18
28560 90º T-connector, 3 spigots ...................................................................................12
28561 45° 3-D T-connector, right, 3 spigots ...................................................................14
28562 Articulated flange connector, 1 spigot ..................................................................15
28580 90º edge connector, 3 spigots ..............................................................................12
28581 45º nodal connector, 4 spigots .............................................................................15
28582 Cross connector, 4 spigots ...................................................................................13
28583 End cap .................................................................................................................18
28600 90º edge connector, 3 spigots ..............................................................................12
28601 45º nodal connector, 4 spigots .............................................................................15
28602 Cross connector, 4 spigots ...................................................................................13
28620 Nodal connector, 4 spigots ...................................................................................13
28621 Articulated connector, 2 spigots ...........................................................................16
28622 Nodal connector, 5 spigots ...................................................................................13
28640 Nodal connector, 4 spigots ...................................................................................13
28641 Articulated connector, 2 spigots ...........................................................................16
28642 Nodal connector, 5 spigots ...................................................................................13
28661 Universal deburrer .................................................................................................30
28665 Container wall profile ............................................................................................26
28666 Sheet pile wall profile ............................................................................................26
28667 Guard rail profile....................................................................................................26
28668 Round bar .............................................................................................................23
28669 Square tube, 2 branches 180º ..............................................................................19
28670 H section ...............................................................................................................21
28671 T-profile .................................................................................................................25
28672 Square tube, 1 branch offset ................................................................................20
28673 Square edge profile ...............................................................................................21
28680 Blind rivet ..............................................................................................................29
28681 Blind rivet ..............................................................................................................29

IND-5
combitech system | Model construction
®

Index

Terms and Conditions of Supply and Payment

1. Scope documents and data to be provided by the party placing the order are received by us. after the agreed-upon delivery period either to remedy the lack of conformity of
1.1. These Terms and Conditions of Supply and Payment for Exports apply to all 7.3. The delivery period shall be deemed to have been adhered to if the goods the goods by repair or supply a substitute contemporaneously with return of the
contractual agreements between ourselves and parties placing orders with us which leave the plant before the delivery period expires or notification has been provid- goods for which a complaint has been issued as we see fit. In the event of reme-
have their registered offices or the branch involved with the contractual agree- ed that the goods are ready for shipment. dy by repair or supply of substitute goods, we shall be obligated to bear all of the
ment outside the territory of the Federal Republic of Germany. That branch which 7.4. If we are unable to meet binding delivery periods in whole or regarding part expenses that are required for this purpose (including transport, road, labour and
concludes the contractual agreement in its own name shall respectively apply. of the goods to be delivered, we shall notify the party placing the order with- material costs) if such expenses do not increase because the goods have been
1.2. These Terms and Conditions of Supply and Payment for Exports shall not out undue delay and at the same time notify the party placing the order about sent to a place other than the place of fulfilment of the agreement.
apply if the party placing the order acquires the goods for personal use or use in the probable new delivery period. If the good to be delivered is still not availa- 10.4. If the party placing the order sets a reasonable grace period for remedy by
a family or household and we knew or should have known such upon the con- ble before the expiry of the new delivery period for reasons for which we are not repair or supply of substitute goods and repair or supply of substitute goods does
clusion of the agreement. responsible, we shall be entitled to cancel the agreement in whole or in part; we not take place within this grace period or if such is refused by us, the party placing
1.3. If the party placing the order’s terms and conditions of purchase differ from shall repay any counter-performance already rendered by the party placing the the order shall be entitled to reduce the purchase price or declare the agreement
these Terms and Conditions of Supply and Payment for Exports, such terms and order without undue delay. avoided in accordance with statutory arrangements. The reduction of the purchase
conditions of purchase shall only apply if such are expressly confirmed in writing by 7.5. In any case a claim to compensation for late delivery on the part of the par- price shall be limited to the damage incurred by the customer.
ourselves. Counter-confirmations by a party placing an order citing its own terms ty placing the order shall be subject to the requirement that the party placing 10.5. Supply of substitute goods or remedy by repair shall not cause the period
and conditions are herewith expressly contested and rejected. the order has set us a reasonable grace period and we have not effected deliv- laid down in no. 9.5 to recommence anew.
1.4. Our Terms and Conditions of Supply and Payment shall also apply exclu- ery within this period.
sively and without restriction even if we effect supply to the party placing the or- 7.5. The legal rights of the party placing the order shall otherwise remain unaffect- 11. Liability
der without reservation in awareness of contrary or differing terms and conditions ed. We shall only bear liability, however, if we are responsible for the delay and only 11.1. We shall bear unlimited liability for harm to life and limb or health impairment
of the party placing the order. within the framework of no. 11 below. We shall in particular not be responsible for that is due to the wilful or negligent violation of an obligation by ourselves or that
delivery not being effected to us in due time by our suppliers. is due to a wilful or negligent violation of an obligation by our legal representative
2. Conclusion and subject of the agreement or parties we hire to carry out the agreement.
2.1. Any and all of our offers are non-binding. 8. Terms and conditions of payment 11.2. We shall bear liability based on the principles of German law governing prod-
2.2. Models, illustrations, drawings, colour tones, etc., that are contained in cat- 8.1. The party placing the order shall review all invoices without undue delay af- uct liability and on the assumption of a guarantee.
alogues, brochures and other printed matter may differ slightly from the features ter receiving such to make sure that they are correct and complete. Any objec- 11.3. We shall moreover only bear liability in the case of wilful or negligent violation
of the products to be supplied as a result of printing technology; such differenc- tions to invoices shall be issued in writing within a period of one month after their of an essential contractual obligation and only for direct damage that was fore-
es shall not be deemed to constitute defects. receipt. Failure to state objections in due time shall be deemed to constitute ap- seeable and which typically occurs at the point in time when the agreement was
2.3. Illustrations and drawings relating to our goods in brochures, written advertis- proval of the invoice. concluded. An essential contractual obligation shall be deemed to be an obliga-
ing material and on price lists as well as the data contained therein, e.g. on materi- 8.2. Our invoices shall be due for payment within 10 days with a 2% discount or tion that makes the proper fulfilment of the agreement concluded with the party
al, dimensions or shape, shall only become a legally binding part of the agreement within 30 days of the respective invoice date net. The date when payment is cred- placing the order possible in the first place and which the party placing the order

combitech system | Model construction | 97032 | 01 2017 | 71708

if the agreement expressly makes reference to such. Information on product fea- ited to the account stated trusted in and was able to trust in and the culpable failure to fulfil such jeopard-
tures shall not be deemed to constitute an assumption of guarantee. for payment on the invoice shall apply in determining whether payment has been ises achievement of the purpose of the agreement.
2.4. The party placing an order shall notify us prior to the conclusion of the agree- effected in due time by the party placing the order. The party placing the or- 11.4. Our liability is excluded in all other cases, in particular for indi-
ment if the goods to be supplied are supposed to be suited solely for regular use der shall bear all additional costs that arise in connection with the selection of rect damage and
or are to be used under unusual or special conditions or if the goods are to be the means of payment. subsequent damage (including foregone profit, loss of goodwill, damage due to
used in any conditions posing a health, safety or environmental risk or the goods 8.3. If the party placing the order fails to pay the purchase price in due time, we loss of production and comparable expenses) unless the party placing the order
will be subject to increased demands or if use of the goods could be associated shall be entitled notwithstanding other legal recourse to charge interest on ar- expressly drew our attention to such in accordance with no. 2.4. prior to the con-
with unusual possibilities for damage or unusual amounts of damage which the rears in the amount of 9 percentage points above the respective base interest clusion of the agreement.
party placing the order is aware of or should be aware of. rate of the European Central Bank. We reserve the right to claim damage go- 11.5. If our liability is excluded or limited, this shall also apply to our employees,
ing above and beyond this. representatives and parties we hire to carry out the agreement.
3. Custom-made products 8.4. We shall be entitled to transfer our claims emanating from the business rela-
3.1. Custom-made products shall be deemed to designate all models that devi- tionship with the party placing the order for the purposes of factoring. 12. Reservation of title
ate from the models referenced in the respectively valid catalogue or brochure. 8.5. If payment is rendered with a bill of exchange, the party placing the order shall 12.1. We reserve title to the goods supplied by us if our claim to the purchase
This especially applies with regard to colours. bear the costs of such, in particular discounting and collection charges. No dis- price is not secured by some other means (e.g. a letter of credit) until payment of
3.2. Orders for custom-made products without exception require written confirma- count shall be granted if payment is effected by bill of exchange. all current and future claims emanating from the purchase agreement and the on-
tion by both parties in the information on the design, dimensions, etc. 8.6. Costs of a bill of exchange that has been invoiced shall be due for payment going business relationship (the claims to be secured) is effected.
3.3. The party placing the order shall not acquire any rights to tools by virtue of immediately without any deductions. 12.2. We shall be obligated to release collateral that we are entitled to as we see

®
paying remuneration for costs or shares of costs for the creation or acquisition of 8.7. Bills of acceptance and bills of exchange shall only be deemed to constitute fit to the extent that the realisable value of the collateral exceeds our claims to
tools; we shall retain title to tools. payment after their redemption. be secured by more than 10% if so requested by the party placing the order.
3.4. Requested samples shall only be supplied subject to charge. 8.8. Setting off or netting amounts shall only be possible in the case of counter-claims 12.2. The party placing the order shall notify us without undue delay in the event
3.5. We shall not be liable for defects that emanate from documents submit- that are based on the same legal relationship, that have been effectively estab- of attachment, confiscation or similar and in the event of the goods supplied be-
ted to us by the party placing the order with respect to custom-made products. lished by a court of law or government authority, or are uncontested or recognised. ing damaged and/or lost; any violation of this obligation as well as any other con-
3.6. If the custom-made product is manufactured based on drawings, models or 8.9. The party placing the order shall only be entitled to exercise a right of reten- duct of the buyer in violation of the agreement, in particular failure to pay the pur-
other information provided by the party placing the order, we shall not be liable tion if its counter-claim is based on the same legal relationship. chase price due for payment, shall provide us the right to declare this agreement
for the violation of third-party protective rights. The party placing the order here- 8.10. We shall be entitled to credit payments effected by the party placing the or- avoided. The party placing the order shall bear all the costs that have had to be in-
with indemnifies us with respect to claims by third parties. der to older debt of said party. curred particularly within the framework of a third -party action successfully lifting
an attachment and that may have had to be incurred to successfully reacquire the
4. Minimum order value and prices 9. Examination and notification of non-conformity obligation objects supplied if such cannot be collected from third parties.
4.1. The minimum order value for initial orders is EUR 150.00 plus taxes and cus- 9.1. The party placing the order shall properly examine the goods or have the 12.3.
toms duties. The minimum order value for all subsequent orders is EUR 25.00 goods properly examined without undue dely. If we have effectively declared the agreement avoided, we shall be entitled to take
plus taxes and customs duties. 9.2. Shipping papers may not be signed (including subject to reservation) be- back the goods subject to reservation of title if we have threatened to take the
4.2. Prices do not include possible additional charges such as duties, taxes and fore the number of boxes delivered has been compared with the information con- goods back a reasonable time in advance. The costs incurred as a result of ex-
other levies and, if nothing to the contrary results from the confirmation of contract tained in the shipping papers. Boxes that are missing or damaged must be noted ercise of the right to take back the goods, in particular transport costs, shall be
and number 5.1 below, apply EXW (Incoterm 2010) from our plant in Wutöschin- with precise information on such being provided on the shipping papers and be borne by the party placing the order. We shall be entitled to exploit the goods sub-
gen not including freight and packaging costs. confirmed by the freight carrier driver by means of a clearly identifiable signature. ject to reservation of title and satisfy our claims from the proceeds from such ex-
9.3. Our liability for the goods violating the agreement shall cease to apply with- ploitation if we have threatened such exploitation a reasonable time in advance.
5. Freight and packaging costs out the party placing the order for this reason being able to exonerate itself if the If the proceeds exceed the unsatisfied claims emanating from the contractual re-
5.1. By way of deviation from EXW (Incoterms 2010), consignments having an party placing the order fails to notify us about such violation of the agreement in lationship, this surplus amount shall be handed over to the party placing the order.
order value of at least EUR 250.00 not including taxes and customs duties shall writing within a period of 7 working days (Saturdays shall not be deemed to consti-
be shipped free domicile in Germany and franco frontier to foreign countries. tute working days) after it determines such or should have determined such while 13. Place of fulfilment, applicable law and legal venue
5.2. The weights and piece numbers determined upon shipment shall apply in the precisely stating the type of violation of agreement. Written notification of lack of 13.1. The place of fulfilment for delivery and payment shall be our head office
calculation of freight costs. conformity by the party placing the order must have been sent by the party placing (Wutöschingen).
5.3 Packaging costs shall be charged at the usual rates in this line of business. the order within the aforementioned period; above and beyond the notice of lack 13.2. The Convention of the United Nations on the International Sale of Goods from
of conformity being sent in due time, such must also actually be received by us. 11 April 1980 (UN purchasing law/CISG) in the English-language version shall ap-
6. Delivery and transfer of risk 9.4. If after a notice of lack of conformity is issued by the party placing the order ply to the legal relationship with the party placing the order. Legal issues that are
6.1. EXW (Incoterms 2010) from our plant in Wutöschingen shall apply to delivery no violation of the agreement can be identified, the party placing the order shall not set out in this Convention or which cannot be decided in accordance with its
and transfer of risk even if we assume the freight costs unless a special delivery reimburse us for the costs incurred in connection with the inspection of the goods. principles shall be subject to German law.
clause has been agreed upon. 9.5. The party placing the order shall at any rate lose the right to claim lack of con- 13.3. The sole legal venue for all disputes arising in connection with the agreement
6.2. If the goods are transported to the party placing the order, such shall be at formity of the goods if it does not provide notice of such within a period of no more is the courts having jurisdiction over our head office of the company in Wutöschin-
the risk of the party placing the order. In this case risk shall be transferred to the than 12 months after it has actually been handed over the goods unless we have gen. We shall, however, also be entitled to assert claims with courts having juris-
party placing the order at that point in time at which the first carrier takes on the granted a longer period of guarantee to the party placing the order. diction over the party placing the order.
goods. If the goods are ready for shipment and shipment is delayed for reasons
for which we are not responsible, risk shall be transferred to the party placing the 10. Goods lacking conformity or exhibiting legal defects
order upon receipt of the notice of readiness for shipment. 10.1. Goods for which a complaint has been issued shall be properly stored alfer aluminium Gesellschaft mbH
®

and kept available Commercial Register of Freiburg Local Court HRB 620 227 Status: 08/2014
7. Delivery periods, non-availability of performance and delay to us.
7.1. The delivery periods stated are generally non-binding. 10.2. We shall be provided the opportunity to inspect the goods for which a com-
7.2. A bindingly committed delivery period shall commence upon the date on which plaint has been issued.
our confirmation of order is sent, but at the earliest at the point in time at which all 10.3. If it is demonstrated that the goods lack conformity, we shall be entitled even

IND-6
combitech system | Model construction
®

Available in a choice of colours

Uncoated and anodized aluminium

uncoated silver stainless steel visual titanium

effect

Powder-coated aluminium

white granite-white granite-red maple beech black

Plastic

white black

Steel, stainless steel, brass and copper

raw galvanized steel grey stainless steel brass copper

The colours shown are for reference purposes only and may differ from the actual colours for display reasons.

IND-7
EN 71708 | 0117

4<ALBBMR=jhadca>
alfer aluminium Gesellschaft mbH
®

Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany

Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected]

EXTERIOR - Technical Data Sheet Dulux Professional
No ratings yet
EXTERIOR - Technical Data Sheet Dulux Professional
30 pages
Industrial Fittings Wire Fill Chart
No ratings yet
Industrial Fittings Wire Fill Chart
1 page
Solid State Concept
No ratings yet
Solid State Concept
169 pages
Question Bank Engineering Chemistry-1
No ratings yet
Question Bank Engineering Chemistry-1
3 pages
Application - Manual - SikaproofA Plus - CA-EN - Web
No ratings yet
Application - Manual - SikaproofA Plus - CA-EN - Web
48 pages
Flexicare ZR L 20180613
No ratings yet
Flexicare ZR L 20180613
2 pages
Alpha Wire M3226 Tech Data-3358307
No ratings yet
Alpha Wire M3226 Tech Data-3358307
5 pages
Endress-Hauser Minicap FTC260 en
No ratings yet
Endress-Hauser Minicap FTC260 en
3 pages
Effects of Copper Pattern Density and Orientation On The Modulus of Bga Substrates
No ratings yet
Effects of Copper Pattern Density and Orientation On The Modulus of Bga Substrates
6 pages
TP 3 Anglais
No ratings yet
TP 3 Anglais
5 pages
Temperature Sensor Series: Thermocouple
No ratings yet
Temperature Sensor Series: Thermocouple
1 page
Single and Two-Phase Discharge From A Pressurized Vessel
No ratings yet
Single and Two-Phase Discharge From A Pressurized Vessel
14 pages
Cabinet Led Profiles: LED Wall Unit Profile
No ratings yet
Cabinet Led Profiles: LED Wall Unit Profile
2 pages
Plastic Injection Mold Design-Rev 4
No ratings yet
Plastic Injection Mold Design-Rev 4
289 pages
141038e - PaC-I - NOVACRON Olive NC
No ratings yet
141038e - PaC-I - NOVACRON Olive NC
2 pages
Plastic Injection Mold Design-Rev 5
No ratings yet
Plastic Injection Mold Design-Rev 5
287 pages
Aluminum Cable Tray
No ratings yet
Aluminum Cable Tray
84 pages
Brochure - Infinitylab Stay Safe Caps Accessories Agilent
No ratings yet
Brochure - Infinitylab Stay Safe Caps Accessories Agilent
16 pages
En Norelem Produktuebersicht 2024
No ratings yet
En Norelem Produktuebersicht 2024
52 pages
Sylax Butterfly Valves: Technical Manual
No ratings yet
Sylax Butterfly Valves: Technical Manual
16 pages
Ultraclear - Sds - MSDS
No ratings yet
Ultraclear - Sds - MSDS
10 pages
1 FastTrak+S150+TX2plus+user+v1.3
No ratings yet
1 FastTrak+S150+TX2plus+user+v1.3
82 pages
Double Spacer 25 2
No ratings yet
Double Spacer 25 2
2 pages
Canti Geometry
No ratings yet
Canti Geometry
6 pages
Alusign - Technical Overwiev (EN)
No ratings yet
Alusign - Technical Overwiev (EN)
36 pages
Norelem Aluminium Profiles 2016
No ratings yet
Norelem Aluminium Profiles 2016
103 pages
Chem1 Lab Mixtures
No ratings yet
Chem1 Lab Mixtures
3 pages
SDS - Hydrocarbons C5-C6
No ratings yet
SDS - Hydrocarbons C5-C6
14 pages
Aalco Panel
No ratings yet
Aalco Panel
12 pages
Schneider Electric - Acti9-iK60 - R9XFH112
No ratings yet
Schneider Electric - Acti9-iK60 - R9XFH112
3 pages
VPC Series: Hose Burst Valves
No ratings yet
VPC Series: Hose Burst Valves
2 pages
Specification For: TFT LCD Module
No ratings yet
Specification For: TFT LCD Module
6 pages
Assemble - Catalog 2023
No ratings yet
Assemble - Catalog 2023
39 pages
ASUNG Flameblock - Sprinkler C-PVC Product Introduction
No ratings yet
ASUNG Flameblock - Sprinkler C-PVC Product Introduction
20 pages
CEL-18663-UK-003-ITP01 - Rev-A1
No ratings yet
CEL-18663-UK-003-ITP01 - Rev-A1
10 pages
Elegance Aluminium Brochure April 2015
No ratings yet
Elegance Aluminium Brochure April 2015
8 pages
Empirical Structural Design For Architects 2c Engineers and Builders Case Studies PDF
100% (1)
Empirical Structural Design For Architects 2c Engineers and Builders Case Studies PDF
6 pages
AT121925 BK005 - Alphawire
No ratings yet
AT121925 BK005 - Alphawire
5 pages
Alex Årrangör
No ratings yet
Alex Årrangör
3 pages
AW Product Specification
No ratings yet
AW Product Specification
5 pages
17CV833/ 15CV833: PAVEMENT Design MODULE 1-Questions and Answers
No ratings yet
17CV833/ 15CV833: PAVEMENT Design MODULE 1-Questions and Answers
25 pages
BBC-Cellpack Produktkatalog EN 2020
No ratings yet
BBC-Cellpack Produktkatalog EN 2020
288 pages
Shell Tellus MA: Industrial Detergent Hydraulic Fluid
No ratings yet
Shell Tellus MA: Industrial Detergent Hydraulic Fluid
3 pages
Cable Tray 64-65
No ratings yet
Cable Tray 64-65
2 pages
Properties of Plastics: Key Concepts and Process Skills
No ratings yet
Properties of Plastics: Key Concepts and Process Skills
20 pages
ZERO DeepDrawn
No ratings yet
ZERO DeepDrawn
65 pages
Aluminium Profile System Product Catalog Alstrut
No ratings yet
Aluminium Profile System Product Catalog Alstrut
244 pages
Soil-Lime Stabilized Blocks Using Fly Ash and Its Application As Wall Proposal of Project Work
No ratings yet
Soil-Lime Stabilized Blocks Using Fly Ash and Its Application As Wall Proposal of Project Work
1 page
Unit-2 Chemical and Mineral Admixtures
No ratings yet
Unit-2 Chemical and Mineral Admixtures
3 pages
AluminumFraming Sec1 Intro
No ratings yet
AluminumFraming Sec1 Intro
12 pages
Abener: Guide
No ratings yet
Abener: Guide
17 pages
AWS A5-5 1996 Low Alloy Steel Electrodes For SMAW
No ratings yet
AWS A5-5 1996 Low Alloy Steel Electrodes For SMAW
55 pages
Megahock FOTON Catalogue (JKR-Approved)
No ratings yet
Megahock FOTON Catalogue (JKR-Approved)
12 pages
Bekaert Solutions For Esd Clothing
No ratings yet
Bekaert Solutions For Esd Clothing
38 pages
Alpha Wire 853278
No ratings yet
Alpha Wire 853278
5 pages
BBC-Cellpack Produktkatalog en 2020
No ratings yet
BBC-Cellpack Produktkatalog en 2020
284 pages
Alpha 630A.
No ratings yet
Alpha 630A.
5 pages
Industrial Products Catalogue National
No ratings yet
Industrial Products Catalogue National
56 pages
Display Design Solutions: WWW - Multipaneluk.co - Uk
No ratings yet
Display Design Solutions: WWW - Multipaneluk.co - Uk
4 pages
CH890 - Spare Parts Manual
No ratings yet
CH890 - Spare Parts Manual
90 pages
System Model Construction: Combitech
No ratings yet
System Model Construction: Combitech
24 pages
Catalogo Lipro 2024
No ratings yet
Catalogo Lipro 2024
171 pages
Texroll Catalogo Inglese
No ratings yet
Texroll Catalogo Inglese
24 pages
APG Catalogo O-Ring American Pipe Gasket
No ratings yet
APG Catalogo O-Ring American Pipe Gasket
112 pages
System Sheets and Panels: Combitech
No ratings yet
System Sheets and Panels: Combitech
36 pages
Basic of Boiler Design
100% (6)
Basic of Boiler Design
186 pages
8rxEM en
No ratings yet
8rxEM en
209 pages
Aluminium Profiles Catalogue
No ratings yet
Aluminium Profiles Catalogue
156 pages
AA A4 2023 Catalogue - 130922 WEB
No ratings yet
AA A4 2023 Catalogue - 130922 WEB
36 pages
Building Materials - Re-Sit Exam Paper and Answer - Sample Questions
100% (2)
Building Materials - Re-Sit Exam Paper and Answer - Sample Questions
2 pages
Chapter 3 Flat-Slabs
No ratings yet
Chapter 3 Flat-Slabs
14 pages
System: Combitech
No ratings yet
System: Combitech
208 pages
Serie 3000 MM - DS4112EN00 (Atual)
No ratings yet
Serie 3000 MM - DS4112EN00 (Atual)
12 pages
CA Catalogue 2017 Ver1.3
No ratings yet
CA Catalogue 2017 Ver1.3
150 pages
Bin Gair Factory Profile Ver1 Eng. 2021
No ratings yet
Bin Gair Factory Profile Ver1 Eng. 2021
17 pages
1produktbroschüre EN WEB 10 2019
No ratings yet
1produktbroschüre EN WEB 10 2019
27 pages
Product Overview: Put Us To Work - For You!
No ratings yet
Product Overview: Put Us To Work - For You!
1 page
10 Workshop Equipments
No ratings yet
10 Workshop Equipments
22 pages
Oline Catalogue 2011
No ratings yet
Oline Catalogue 2011
95 pages
Calrad Catalog (90 Series)
No ratings yet
Calrad Catalog (90 Series)
15 pages
Research Note On Aluminium Alloy Property PDF
No ratings yet
Research Note On Aluminium Alloy Property PDF
80 pages
Gabinetes Pentair
No ratings yet
Gabinetes Pentair
8 pages
Deep Drawn
No ratings yet
Deep Drawn
66 pages
Us Tray Catalog 2011
No ratings yet
Us Tray Catalog 2011
8 pages
Preformed Packings Catalog
No ratings yet
Preformed Packings Catalog
112 pages
O Ring Design
100% (2)
O Ring Design
112 pages
Cable Tray 4 PG
No ratings yet
Cable Tray 4 PG
4 pages
Oring Catalog
No ratings yet
Oring Catalog
112 pages
AmgardCatalog2009 TRAY
No ratings yet
AmgardCatalog2009 TRAY
20 pages
Catalog 1
No ratings yet
Catalog 1
112 pages