S4CPlus Robins Filezilla

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 3

Backup

Desde TeachPendat ir a micelaneos, service y presionar tecla Enter.

Presionar la tecla File, seleccionar el apartado BackUp y presionar la tecla Enter.

Actualización contadores de revolución

Abrir la ventana de Servicio.

Seleccionar el apartado Ver/ Calibración.

Seleccionar el apartado Calibración: Actualizar Cont. Rev.

Nota: Aparecerá una ventana de diálogo en la que el usuario deberá seleccionar el eje que desea
actualizar y por ultimo presionar la tecla ok.

 Robinstall is used to dowload system for S4C+ robot controllers.


FILEZILLA

Robotstudio doesnt work with S4C/S4C+ controllers.  You can use an FTP client to connect.  I
use Filezilla.}

Are you trying to connect through the service port (the connection on the front of the
controller)?

This is dedicated for other tasks, you should configure the LAN address and plug into the LAN
port (on top of the main computer).

You will have to do an X start to configure the address of the LAN port.

Also you can not use anonymous login - it does not matter what you put in for the user ID and
password but it can not be blank.

Some More detail:

Network settings
IP Address 
192.168.125.82

Subnet Mask
255.255.255.240

Default Gateway
192.168.125.81

In FileZilla
FTP Site
192.168.125.1

Dont use anonymous log on


type in something e.g.
 
ABB for User ID
ABB for password

Make sure the connection in filezilla is in PASV mode as this can sometimes cause an issue.

You might also like