Temperatureshop.com.
au 1420
SYDNEY: 7 YAMMA STREET SEFTON, NSW 2162 AUSTRALIA PHONE: 61 2 9721 8644 FAX: 61 2 9738 9339
MELBOURNE: 8/280 WHITEHALL STREET, VIC 3013 AUSTRALIA PHONE: 61 3 9687 0000 FAX: 61 3 9687 1900
BRISBANE: PO BOX 5138 ALEXANDRA HILLS, QLD 4161 AUSTRALIA PHONE: 61 0418 222 868 FAX: 61 7 3821 3693
INTERNET: www.temperatureshop.com.au EMAIL: [email protected]
RTD & THERMOCOUPLE WIRE & CABLE
PVC RIPCORD P
This cable has a Figure 8 Rip Design for easy conductor separation. It is small
and compact in size and is also flexible, flame retardant and economical in it’s
construction.
♦ Available in Solid 24 AWG conductors
♦ Designed for continuous use at temperatures from –26°C to 105°C
♦ Individual Insulation - Colour Coded
♦ Construction - Parallel conductors bonded together.
APPLICATIONS
♦ Temperature Sensors
♦ Test Facilities
♦ Laboratories
♦ Transportation
♦ Heating and Air Conditioning
♦ Appliances
PVC / PVC PP
The least expensive jacketed extension wire insulation available. The PVC
individual colour-coded conductors are insulated with 15 mils (nominal) of PVC,
then parallel conductors are given a 20 mil PVC jacket. The jacket is easily
striped for separation of insulated conductors for assembly.
♦ Available In Solid or Stranded Conductors
24AWG, 20AWG & 16 AWG; 7x.2, 14x.2, 7x.3,
APPLICATIONS
♦ Permanent Sensor Fabrication
♦ Laboratories
♦ Test Facilities
♦ Short-run Extension Leads
1420
RTD & THERMOCOUPLE WIRE & CABLE
PVC/SCREEN/PVC PSP
Single & Multipair cables with an overall shield are constructed by
insulating the single conductors with PVC. One conductor of each
pair is numbered and twisted with its counterpart. The twisted pairs
are cabled with an Insulated copper communications wire and the
entire construction is wrapped with an aluminium/Mylar tape shield.
A copper drain wire is applied under the extruded PVC jacket.
♦ Continuous temperature rating of 105°C
♦ Shielded construction provides noise protection.
♦ Excellent moisture resistance; good chemical and abrasion resistance.
APPLICATIONS
♦ General plant installation
Available in Solid 20AWG and Stranded 7x.3, 14.2 in single pair,
Multipair only 20AWG solid conductors.
PVC/SCREEN/PVC
Individual & Overall Screen PSPIO
This construction is the same as the PSP construction, with the
addition of an aluminium/Mylar tape and drain wire over each single
pair in the construction in addition to the overall shield. This provides isolation for
each separate pair in the construction and
eliminates internal and external noise in the circuit.
♦ Continuous temperature rating of 105°C
♦ Dual-shielded construction provides excellent noise protection.
♦ Excellent moisture resistance; good chemical and abrasion resistance.
APPLICATIONS
♦ General plant installation. Available in 20AWG Solid Conductors
1420
RTD & THERMOCOUPLE WIRE & CABLE
PVC / BRAIDED SCREEN / PVC
RTD / Instrument cable in 2, 3, 4 or 6 conductors.
The stranded conductors are tinned copper in 24 or 20 awg sizes covered in colour coded extruded PVC .
A tinned copper wire braided screen and a PVC colour coded outer jacket complete the cable.
Insulation Working Temperature – 30 to 105 Deg C
Shielded construction provides noise protection
Excellent moisture resistance; abrasion resistance
Teflon / Teflon TT
Colour-coded Teflon is extruded over each single conductor. The single
Insulated conductors are laid parallel and insulated with an extruded jacket
of Teflon.
♦ Continuous temperatures up to 205°C
♦ Intermittent temperatures up to 260°C
APPLICATIONS
♦ Power Generating Plants
♦ Petroleum Plants
♦ Field Heat Treating
Available in 30AWG, 24AWG, 20AWG Solid Conductors
7x.2, 7x.3 Stranded Conductors
TEFLON / BRAIDED SCREEN / TEFLON
Thermocouple or RTD / Instrument cable in 2, 3, 4 or 6 conductors.
The stranded conductors are nickel or silver plated copper in
24 or 20 awg sizes covered in colour coded extruded PFA teflon .
A tinned or nickel plate braided screen and a PFA Teflon colour coded outer jacket complete the cable.
Insulation Working Temperature – 200 to 260 Deg C
Shielded construction provides noise protection
Excellent moisture resistance; chemical and abrasion resistance
1420
RTD & THERMOCOUPLE WIRE & CABLE
SILICON RUBBER / SILICON RUBBER
Thermocouple or RTD Cable
Colour coded silicon rubber is extruded over solid or stranded conductors.
The single insulated conductors may be laid parallel or twisted and insulated with a
Colour coded silicon rubber jacket.
Insulation Working Temperature – 40 to 200 Deg C
Excellent moisture & chemical resistance
Kapton / Kapton KK
Construction Description: Very tough, durable double wrap of heat-fused
polyimide tape is applied over each conductor. Each insulated single conductor is
coated with an ANSI colour-coded polyimide varnish. The jacket consists of a
double-wrapped heat-fused polyimide tape.
♦ Designed for continuous use at temperatures to 260°C, intermittent readings to 343°C
♦ Colour-coded single conductor and a double-wrapped jacket offers easy po-larity identification.
♦ Excellent abrasion, moisture and chemical resistance.
APPLICATIONS
♦ Power Plants
♦ Kilns
♦ Petroleum Plants
♦ Aerospace Industry
♦ Cryogenic Applications
Available in 24, 20 AWG Solid Conductors
1420
RTD & THERMOCOUPLE WIRE & CABLE
Glass Twist STW
A high temperature, high tensile strength, extra heavy fibreglass yarn is braided
over each conductor. The insulated, colour-coded conductors are impregnated
with a high-temperature modified resin and twisted to form a pair. This product
construction does not include an overall jacket.
♦ Designed for continuous use at temperatures to
648°C, intermittent use to 787°C
♦ Good abrasion resistance.
♦ Easily stripped and terminated.
♦ Economically practical for short-duration applications.
APPLICATIONS
♦ Homogenizing furnaces for billet pre-heating.
♦ Furnace Temperature Surveys.
♦ Heat treating.
Available in 24AWG & 20AWG Solid Conductors
Glass / Glass GG
Most popular and widely applied of all glass insulations. A colour-coded
fibreglass braid saturated with a high-performance resin is used for insulation of
the single conductors and jacket.
♦ Designed for continuous use at temperatures to
510°C intermittent use 648°C
♦ Good moisture and chemical resistance; fair abrasion resistance.
APPLICATIONS
♦ Heat treating.
♦ Glass & Ceramic Kilns.
♦ Foundries.
♦ Extensive applications in aluminium processing.
Available in 40AWG, 30AWG, 24AWG, 20AWG Solid Conductors
7x.2, 7x.3, 7x.5 Stranded Conductors
1420
RTD & THERMOCOUPLE WIRE & CABLE
High Temperature Glass/ Glass HGHG
A high-temperature, high tensile strength fibreglass, either colour-coded or with
tracer yarn, is braided on both the single conductors and the overall jacket. Both
are impregnated with a 260ºC modified resin Saturant.
♦ Designed for continuous use at temperatures to
648°C, intermittent readings to 787°C
♦ Good moisture and abrasion resistance.
APPLICATIONS
♦ Preheating & Stress Relieving of forgings.
♦ Heat Treating for annealing, aging, or hardening.
♦ Furnace Temperature Surveys.
Available in 24 AWG, 20 AWG Solid Conductors
Refrasil / Refrasil RR
High temperature silica fibres are braided on the single conductors as well as the
overall jacket. Because saturant is not used, this product is not recommended
for abrasive applications. Each conductor as well as the overall jacket are
braided with this high temperature yarn to provide maximum flexibility at
extremely high temperatures. A tracer is braided into insulation for polarity and
calibration identification.
♦ Designed for continuous use at temperatures to 982°C intermittent use to 1093°C
♦ Not recommended for applications where insulation may be subject for abrasion.
APPLICATIONS
♦ Furnace survey thermocouples
♦ Heat treating
Available in 20AWG Solid Conductors
1420
RTD & THERMOCOUPLE WIRE & CABLE
Ceramic Fibre CFCF
Highest temperature flexible insulation available. The braided yarn is a
composition of the oxides of alumina, boric and silicone. Each conductor as well
as the overall jacket are braided with this high temperature yarn to provide
maximum flexibility at extremely high temperatures.
♦ Designed for continuous use at temperatures
1204°C, intermittent use to 1426°C
♦ Good abrasion and chemical resistance.
APPLICATIONS
♦ As a replacement for beaded thermocouples
♦ Heat treating
♦ Coke ovens
♦ Soaking pits
♦ Furnace Survey Thermocouples
♦ Brick & Tile Kilns
Available in 20AWG Solid Conductors.
Autoclave AC
A unique construction designed to eliminate the ‘leakage path through wire’
often found in autoclave applications.
24 AWG solid conductors, colour coded and Teflon insulated are bonded
together in a proprietary process eliminating the need for a conventional
jacket. Maximum Temperature 260°C.
Stainless Steel Braiding
To provide increased strength and abrasion resistance all cables may be over braided
