Scribd Logo
Upload

Welcome to Scribd!

  • 17 views

    AMTED398078EN - Web 55

    Uploaded by

    Hany Shaltoot
    LPCT sensors are current sensors that comply with IEC 60044-8 standards and are designed to measure currents between 5A and 630A. Sepam series 20, 40, 60, and 80 protection units are used with LPCT sensors to acquire phase current measurements and perform protection functions. The LPCT protection chain offers consistent protection for currents from 5A to 630A with simple installation of LPCT sensors directly connected to Sepam units.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    AMTED398078EN - Web 55

    Uploaded by

    Hany Shaltoot
    17 views1 page
    LPCT sensors are current sensors that comply with IEC 60044-8 standards and are designed to measure currents between 5A and 630A. Sepam series 20, 40, 60, and 80 protection units are used with LPCT sensors to acquire phase current measurements and perform protection functions. The LPCT protection chain offers consistent protection for currents from 5A to 630A with simple installation of LPCT sensors directly connected to Sepam units.

    Original Title

    AMTED398078EN_web 55

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    LPCT sensors are current sensors that comply with IEC 60044-8 standards and are designed to measure currents between 5A and 630A. Sepam series 20, 40, 60, and 80 protection units are used with LPCT sensors to acquire phase current measurements and perform protection functions. The LPCT protection chain offers consistent protection for currents from 5A to 630A with simple installation of LPCT sensors directly connected to Sepam units.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    17 views1 page

    AMTED398078EN - Web 55

    Uploaded by

    Hany Shaltoot
    LPCT sensors are current sensors that comply with IEC 60044-8 standards and are designed to measure currents between 5A and 630A. Sepam series 20, 40, 60, and 80 protection units are used with LPCT sensors to acquire phase current measurements and perform protection functions. The LPCT protection chain offers consistent protection for currents from 5A to 630A with simple installation of LPCT sensors directly connected to Sepam units.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    SM6 Protection & control monitoring

    General characteristics LPCT protection chain

    Standard
    applications
    TLP130, TLP190, CLP2 sensors for
    Sepam series 20, 40, 60, 80 protection units
    PE88012

    LPCT sensors are voltage-output current sensors


    (Low Power Current Transformer) compliant with the IEC 60044-8 standard.
    These sensors are designed to measure rated current between 5 A and 630 A,
    with a ratio of 100 A / 22.5 mV.
    Sepam series 20, 40, 60 and 80 protection units are at the heart of the LPCT
    protection chain.
    Sepam series 20, 40, 60 and 80 performs the following functions:
    •• acquisition of phase currents measured by the LPCT sensors
    Sepam series 20 •• utilization of measurements by the protection functions
    •• tripping of the breaking device in case of fault detection.

    Advantages
    Demanding
    applications •• Consistent protection chain with the same sensor measures phase currents
    from 5 A to 630 A
    •• Simple to install and implement:
    PE88011

    -- installation of LPCT sensors


    TLP130 and TLP190 are installed around MV cable
    CLP2 is installed on the MV circuit
    -- LPCT connected directly to Sepam series 20, 40, 60 and 80
    -- accessories available to test the LPCT protection chain by secondary current
    injection.
    •• LPCTs range of use
    LPCT measuring and protection function guaranteeing the accuracy up to
    Sepam series 40 the short-time current.
    Following the range of use of LPCT:
    -- from 5 A up to 1250 A respecting the error limits imposed by the accuracy class 0.5
    -- from 1250 A up to 50 kA respecting the error limits imposed by the accuracy class 5P.
    Ratio error
    DE58405EN

    Custom 5.00
    applications 4.75
    4.50
    4.25
    4.00
    3.75
    PE88010

    3.50
    3.25 Protective class 5P
    3.00
    2.75 Measuring class 0.5
    2.50
    2.25
    2.00
    1.75
    1.50
    1.25
    1.00
    0.75
    0.50
    Sepam series 60 and 80 0.25 A

    5 20 100 1000 1250 2000 3000 31500 40000 50000

    •• Optimized integration of functions:


    -- measurement of phase rated currents as of 25 A that is set by micro-switch
    MT11325_LG

    -- monitoring of LPCT sensor by Sepam series 20, 40, 60 and 80 (detection of


    phase loss).

    Connections
    1 LPCT sensor, equipped with a shielded cable fitted with an RJ45 connector
    to be connected directly to the card 3
    2 Sepam series 20, 40, 60 and 80 protection unit
    3 Card interface that adapts the voltage delivered by the LPCT sensors,
    with microswitch setting of rated current.
    -- CCA671 card for series 60 and 80
    -- CCA670 card for series 20 and 40.

    Testing and injection


    4 CCA613 remote test plug, flush-mounted in front panel of cubicle, equipped
    with a 3-m cord to be connected to the CCA670 connector test socket (9-pin Sub D)
    5 ACE917 injection interface, used to test the LPCT protection chain with
    a standard injection box
    6 Standard 1A injection box.

    schneider-electric.com SM6 catalogue 55

    You might also like