0% found this document useful (0 votes)
376 views58 pages

X REL Catalog

XTR3001x is a family of small footprint PWM controllers designed for extreme reliability and high temperature applications from -60°C to +230°C. The PWM controllers can operate from input voltages as high as 35V and at frequencies up to 800kHz, allowing for small and low-cost external passive components. Key features include an internal oscillator and voltage reference, programmable soft-start, voltage tracking, synchronization capability, over-current protection and power-good flag. Special design techniques allow for precise, robust and reliable operation in critical applications.

Uploaded by

Ruboto Boto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
376 views58 pages

X REL Catalog

XTR3001x is a family of small footprint PWM controllers designed for extreme reliability and high temperature applications from -60°C to +230°C. The PWM controllers can operate from input voltages as high as 35V and at frequencies up to 800kHz, allowing for small and low-cost external passive components. Key features include an internal oscillator and voltage reference, programmable soft-start, voltage tracking, synchronization capability, over-current protection and power-good flag. Special design techniques allow for precise, robust and reliable operation in critical applications.

Uploaded by

Ruboto Boto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 58

POWER MANAGEMENT

CLOCK AND TIMING


DISCRETES
LOGIC
INTERFACING & TRANCEIVERS
PACKAGE OUTLINES

PRODUCT CATALOG
High Reliability and High Temperature Integrated Circuits
from -60°C to +230°C
APRIL 2021
TABLE OF CONTENTS
About X-REL Semiconductor 4
Part Naming and Marking Codes 5

Power Management 6
XTR3001x PWM Controller 6
NEW XER30019 PWM Controller ( Plastic package ) 8
NEW XTR3002x Buck DC/DC 9
XTR2041x 35V N-Channel Power MOSFET with Floating Driver 10
XTR2081x 80V Low-side N-Channel Power MOSFET with Driver 12
XTR7001x 1.5 A Low-Dropout Voltage Regulator 13
XTR7002x High Input Voltage 2A Positive LDO Regulator 14
XTR2602x Isolated Intelligent Gate Driver 16
XTR2501x Power Gate Driver 18
XTR2502x Intelligent Gate Driver 20
XTR2541x 35V Floating Driver 22
XTR7501x Positive Series Voltage Regulator 24
NEW XTR7503x Negative Series Voltage Regulator 26
XTR431 Programmable Shunt Regulator 28

Clock & Timing 30


XTR65x Versatile Timer 30
XTR6001x Crystal Oscillator Driver 32

Discretes 34
XTR1N04xx/XTR1N08xx General Purpose Diodes 34
XTR1K1210 10A, 1200V SIC Schottky Diode 36
XTR2N0x07 Small-Signal P- and N-Channel MOSFETs 37
XTR2N03xx/XTR2N05xx P-Channel Power MOSFETs 38
XER2N0525 P-Channel Power MOSFETS ( Plastic package ) 38
XTR2N04xx/XTR2N08xx N-Channel Power MOSFETs 40

Logic 42
XTR54000 Reconfigurable Logic Gates 42
XTR5001x Bidirectional Level Translators 44
XTR5417x/XTR541G7x Edge-Triggered D Flip-Flop 46

Interfacing & Transceivers 48


XTR4001x Isolated Two Channel Transceiver 48

PACKAGE OUTLINES 50
about x-rel semiconductor
X-REL Semiconductor, a division of EASii IC, designs innovative High-Reliability & High-Temperature Integrated Circuits and systems
for a wide range of application fields. Our products are made to reliably perform for years while ensuring the reduction of the overall
system costs all along the product lifecycle.

Easii IC is a fabless company working with worldwide recognized contractors which allows us to offer products of extreme reliability
and quality.

Our network of distributors & representatives all around the world ensures the best technical and commercial support to our customers.

Thanks to the close relationship we keep with our customers, we are able to anticipate their needs offering the right solution at the right
time.

Our commitment is on reducing their overall system costs. This is achieved by keeping in mind application constraints all along the
definition, development and manufacturing of our products, shortening the learning curve and allowing an easy adoption. Our devices
offer many functional features contributing to reduce the final system bill of material (BoM).

Headquarter

90, avenue Leon Blum BP 2612


38036 Grenoble Cedex 2
FRANCE
www.x-relsemi.com
Support : [email protected]
Sales : [email protected]
Phone : +33 4 56 580 580

4
part naming and marking

XTR NNNNN P

Process : Part number Package type


XTR = HiTemp, HiRel
XER = Extended Temp, HiRel
Ceramic :
Family 30: PWM Controller
• DIP8 • SOIC16 • LJCC28
Family 20, 25, 26: Drivers
• DIP14 • SOIC24 • LJCC52
Family 2N: Transistors
• DIP16 • SOIC28
Family 1N & 1K: Diodes
• DIP24 • DFP8
431, 750xx, 700x: Regulators
• DIP28 • DFP10
40: Transceivers
50 : Level Shifter
54: Logic Gates Metal : Plastic
65 : Precision Timer • TO257
60: Clock & Timing
• PQFP44
• TO254 • PSOIC8
• TO18

Part marking code

Part Naming and Marking Codes


Part Reference : XTRNNNNN
XTR X-REL Semiconductor, high-temperature, high-reliability product
XER (XTR Series -60°C to +230°C)
(XER Series -50°C to +175°C).
NNNNN Part number (0-9, A-Z).
P Package type : T - Transistor outline (TO)
TD - Tested die FE - Flat Pack with ePad
D - Dual-in-line (DIP) LJ - J-formed leaded chip carrier
S - Small outline (SOIC) Q - QFP
Unique Lot Assembly Code: YYWWANN
YY Two last digits of assembly year (e.g. 13 = 2013).
WW Assembly week (01 to 52).
A Assembly location code.

NN Assembly lot code (01 to 99).

Example of part naming and marking :


XTR30011-S

Part name 30011 from XTR Series. Assembled in week 34 of year 2020 in assembly location B with assembly lot number 01.

5
Power Management
XTR3001X
PWM CONTROLLER
DESCRIPTION FEATURES
XTR3001x is a family of small footprint PWM controllers designed for • Operational beyond the -60°C to +230°C
extreme reliability and high temperature applications such as DC/DC temperature range.
converters and PWM control. Being able to operate from input voltages • Supply voltage up to 35V.
as high as 35V, XTR3001x PWM controllers can run at frequencies as • Monolithic PWM controller.
high as 800kHz, allowing the use of small footprint and low-cost external • Internal linear regulator with Under Voltage LOckout
passive components. (UVLO).
Functionality features include internal oscillator and voltage reference, • Input voltage feed-forward.
programmable soft-start, voltage tracking, synchronization capability, • Selectable asynchronous and pulse-skip modes.
over-current protection and power-good flag. • Selectable output signal polarity: active HIGH or LOW.
Special design techniques were used to allow the XTR3001x parts to • Resistor programmable maximum duty cycle.
offer a precise, robust and reliable operation in critical applications. Full • Programmable integrated oscillator with
functionality is guaranteed from -60°C to +230°C, though operation well synchronizing capability.
below and above this temperature range is achieved. • Resistor-programmable soft-start period.
Parts from the XTR3001x family have all functional features to operate in • Power-Good (PGood) flag.
buck, boost, buck-boost, flyback and push-pull modes. • Programmable over-current protection level.
Standard packaging options range from full-featured 24-lead packages to • Programmable polarity of over-current protection.
small footprint 8-lead packages. • Programmable minimum duty-ratio in pulse-skip mode.
XTR3001x family parts have been designed to reduce system cost and • Voltage tracking capabilities.
ease adoption by reducing the learning curve and providing smart and • Shut-down mode.
easy to use features. • Interleaved mode for push-pull architectures.
Parts from the XTR3001x family are available in ruggedized SMT and • Forced bootstrap capacitor pre-charge mode.
thru-hole packages. Parts are also available as tested dies. • Latch-up free.
• Ruggedized SMT and thru-hole packages.
APPLICATIONS • Also available as tested dies.

• Reliability-critical, Automotive, Aeronautics & Aerospace, Down-hole.


• DC/DC converters, point-of-load power converters, switching power
supplies, PWM control.

TYPICAL APPLICATION DIAGRAM

VIN Lout
6-35V VOUT
Rvin

N1 N2
Cpvin
Cout
Rpvdd
Cpvdd

VIN PVDD
VDD

PVDD

DRAIN

VDD
Cvin

ENABLE
/LPMode BDrv
IN
IntlvMode VDD
Cvdd
SOURCE

RT/SYNC SW
Rswth

CKOUT
XTR2081x
GND

SWT ADrv

XTR30014 C3 C2 R4
COMP
PGood
FB
Rocs
PSkipEnbl
VDD

PVDD

DRAIN

OCS
PSkipTh
AsyncEnbl
IN
VOUT
SOURCE
PGND

DCLimit SS/TR
GND

XTR2081x
GND

R3 C1

R1
R2

Rsense

6
POWER management
XTR3001X
PWM CONTROLLER
TYPICAL APPLICATION DIAGRAM

VIN
6-35V Rbt
Cpvin

Rpvdd

VDD

PVDD

DRAIN
Rvin

Cbt
IN

Cpvdd
VIN PVDD

SOURCE
VDD
Cvin

ENABLE XTR20411

GND
/LPMode HDrv
XTR20412
Lout
Cvdd
RT/SYNC SW
VOUT
Rswth

CKOUT

SWT LDrv

VDD

PVDD

DRAIN
Resr

XTR30011 C3 C2 R4
COMP IN
PGood FB Cout1 Cout2
X7R NP0

SOURCE
Rocs
PSkipEnbl
OCS XTR20411
PSkipTh
GND
AsyncEnbl
XTR20412

OCPMode VOUT
PGND

R3 C1
DrvPol SS/TR
GND

Rss
R1
R2

Rsense

ORDERING INFORMATION:

Product Package Pin Operating Functional mode


Package
Reference Extension Material Count Temperature Buck Boost Buck-boost Flyback Push-pull
XTR30010 - TD — — Tested Die -60°C to +230°C
XTR30011- S Ceramic 24 SOIC -60°C to +230°C
XTR30011- D Ceramic 24 Side-brazed DIP -60°C to +230°C
XTR30014- S Ceramic 24 SOIC -60°C to +230°C
XTR30014- D Ceramic 24 Side-brazed DIP -60°C to +230°C
XTR30015- D Ceramic 8 Side-brazed DIP -60°C to +230°C
XTR30016- D Ceramic 8 Side-brazed DIP -60°C to +230°C
Gull-wing flat
XTR30017- FE Ceramic 10 -60°C to +230°C
pack with ePad
XTR30018- S Ceramic 16 SOIC -60°C to +230°C

7
power management
NEW
XER30019
PWM CONTROLLER
DESCRIPTION FEATURES
XER30019 is a family of small footprint PWM controllers designed for • Supply voltage up to 35V.
extreme reliability and high temperature appli-cations such as DC/DC • Operational beyond the -50°C to +175°C temperature
converters and PWM control. Being able to operate from input voltages range.
as high as 35V, XER30019 PWM controllers can run at frequencies as • Monolithic PWM controller.
high as 800kHz, allowing the use of small footprint and low-cost external • Internal linear regulator with Under Voltage LOckout
passive components. (ULVO).
Functionality features include internal oscillator and voltage reference, • Input voltage feed-forward.
programmable soft-start, voltage tracking, synchronization capability, • Selectable asynchronous and pulse-skip modes.
over-current protection and power-good flag. • Selectable output signal polarity: active HIGH or LOW.
Special design techniques were used to allow the XER30019 parts to • Resistor programmable maximum duty cycle.
offer a precise, robust and reliable operation in critical applications. Full • Programmable integrated oscillator with synchronizing
functionality is guaranteed from -50°C to +175°C. capability.
Parts from the XER30019 have all functional features to operate in buck, • Resistor-programmable soft-start period.
boost, flyback and push-pull modes. • Power-Good (PGood) flag.
• Programmable over-current protection level.
XER30019 parts have been designed to reduce system cost and ease • Programmable polarity of over-current protection.
adoption by reducing the learning curve and providing smart and easy to • Programmable minimum duty-ratio in pulse-skip mode.
use features. Part is available in plastic package. • Voltage tracking capabilities.
• Shut-down mode.
APPLICATIONS • Interleaved mode for push-pull architectures.
• Forced bootstrap capacitor pre-charge mode.
• Reliability-critical, Automotive, Aeronautics & Aerospace, Down-hole. • Latch-up free.
• DC/DC converters, point-of-load power converters, switching power • Ruggedized SMT
supplies, PWM control.

TYPICAL APPLICATION DIAGRAM

VIN
6-35v Rbt
Cpvin
VIN Lout
6-35v
Rpvdd

VOUT
VDD

DRAIN
PVDD

Rvin
Rvin

Cbt
IN Cpvin
Cpvdd

Rpvdd

Resr
VIN PVDD
SOURCE

VDD
Cvin

ENABLE XTR20411
Cpvdd
GND

PVDD Cout1 Cout2


/LPMode HDrv VIN
XTR20412 X7R NP0
VDD

PVDD

DRAIN

VDD
ENABLE
Cvin

Lout
Cvdd /LPMode BDrv
RT/SYNC SW
VOUT IN
Rswth

CKOUT VDD
Cvdd RT/SYNC SW
SOURCE

SWT LDrv CKOUT


Rswth

XTR2041x
VDD

PVDD

DRAIN

Resr
GND

XER30019 SWT ADrv XTR2081x


C3 C2 R4

PGood
COMP IN XER30019
FB Cout1 Cout2
X7R NP0 C3 C2 R4
PGood
SOURCE

Rocs COMP
PSkipEnbl
OCS XTR20411 PSkipEnbl FB
PSkipTh
GND

PSkipTh Rocs
XTR20412
VDD

PVDD

DRAIN

AsyncEnbl OCS
AsyncEnbl

OCPMode VOUT OCPMode


IN
PGND

PGND

R3 C1
DrvPol SS/TR VOUT
GND

DrvPol
GND

SOURCE

SS/TR XTR2041x
Rss
GND

R1
R2 XTR2081x
Rss

R3 C1

Rsense
R1
R2

Rsense

ORDERING INFORMATION:

Product Package Pin Operating Functional mode


Package
Reference Extension Material Count Temperature Buck Boost Flyback Push-pull
XER30019 - Q Plastic 44 Plastic QFP -50°C to +175°C

8
POWER management
NEW
XTR3002X
BUCK DC/DC
DESCRIPTION FEATURES
XTR3002x is a family of small footprint BUCK designed for extreme • Supply voltage up to 35V.
reliability and temperature applications such as DC/DC converters and • Operational beyond the -60°C to +230°C temperature
PWM control. Being able to operate from input voltages as high as 35V, range.
XTR3002x PWM controllers can run at frequencies as high as 800kHz, • Monolithic BUCK.
allowing the use of small footprint and low-cost external passive com- • Under Voltage LOckout (UVLO).
ponents. • Input voltage feed-forward.
Functionality features include internal oscillator and voltage reference, • Programmable integrated oscillator with synchronizing
programmable soft-start, voltage tracking, synchronization capability, capability.
over-current protection and power-good flag. • Resistor-programmable soft-start period.
Especial design techniques were used allowing the XTR3002x parts to • Programmable over-current protection level.
offer a precise, robust and reliable operation in critical applications. Full • Voltage tracking capabilities.
functionality is guaranteed from -60°C to +230°C, though operation well • Shut-down mode.
below and above this temperature range is achieved. • Latch-up free.
Standard packaging options offer the possibility to operate in buck • Ruggedized SMT package.
(XTR30021).
XTR3002x family parts have been designed to reduce system cost and
ease adoption by reducing the learning curve and providing smart and
easy to use features.
Parts from the XTR3002x family are available in ruggedized SMT package.

APPLICATIONS
• Reliability-critical, Automotive, Aeronautics & Aerospace, Down-hole.
• DC/DC converters, point-of-load power converters, switching power
supplies.

TYPICAL APPLICATION DIAGRAM

VIN
6-35V Rpvdd Rbt
Cpvin
Cpvdd
Rvin

XTR30020
BST_P

Cbt
PVDD

VIN
DRAIN
VDD

PVDD

VDD
ENABLE
IN
HDrv
Cvin

Cvdd
SOURCE
Rswth

XTR20412
GND

SWT
HS_S_ Lout
LS_D
Power Good PGood XTR30010 VOUT
DRAIN
VDD

PVDD

Resr

OCP Mode OCPMode


IN
LDrv
Cout1 Cout2
CKOUT
SOURCE

X7R NP0
Rck

RT/SYNC SW XTR20412
GND
SS/TR

COMP
PGND

VOUT

OCS
GND
Cck

FB

SW

C1

Rocs

R3
Rss Rsense R1

C2
C3 R4

ORDERING INFORMATION: R2

Product Package Pin Operating


Package
Reference Extension Material Count Temperature

XTR30021- LJ Ceramic 52 Leaded J Chip Carrier -60°C to +230°C

9
power management

XTR2041X
35V N-CHANNEL POWER MOSFET WITH FLOATING DRIVER
DESCRIPTION FEATURES
XTR2041x is a family of extremely flexible power N-channel MOSFETs • Operational beyond the -60°C to +230°C temperature
with integrated driver designed for extreme reliability and high range.
temperature applications such as DC/DC converters, motor control and • Robust operation as low-side or high-side switch.
power switching. XTR2041x parts can be used either as high-side (35V • Input-to-output level shifting from -30V to +35V.
max), low-side, or low-side switch with negative offset (-30V max) on the • Standard Schmitt-trigger CMOS input.
output stage (SOURCE connected to a negative voltage), while receiving • Exists in inverting and non-inverting versions
a control input signal referenced to GND. XTR2041x parts can be directly • Plug-and-play with any digital 5V output.
driven by any 5V digital output, making them fully plug-and-play devic- • Over current (desaturation) protection.
es, avoiding any time consuming optimization of the matching network • Soft shut down.
between driver and power transistor. • Under Voltage LOckout UVLO protection on the output
The XTR2041x family is composed of two different dies each with stage .
different maximum output current. • Low on-resistance :
XTR2041x parts are robust to usual spikes associated with parasitic
inductors and fast transients in switching applications. - XTR20411 : 1.13 Ω @ 230°C
Features of XTR2041x family parts include UVLO at the driver output, - XTR20412 : 0.33 Ω @ 230°C
desaturation protection of the output transistor with soft shut-down
functionality and possibility to select inversion of control signal. • Large peak current capabilities:
Full functionality is guaranteed from -60°C to +230°C, though operation
well beyond this temperature range is achieved. XTR2041x family parts - XTR20411 : 3.9A @ 230°C
have been designed to reduce system cost and ease adoption by reducing - XTR20412 : 8.3A @ 230°C
the learning curve and providing smart and easy to use features. The
Parts from the XTR2041x family are available in ruggedized SMD and • XTR20412A for positive application
through hole hermetic packages. • XTR20412B for negative application

APPLICATIONS • Low On- and Off-time (230nsec and 280nsec @


230°C)
• Reliability-critical, Automotive, Aeronautics & Aerospace, Down-hole. • Monolithic design.
• DC/DC converters, motor drive, switching power supplies, switching • Latch-up free.
control.

TYPICAL APPLICATION DIAGRAM

High
VCC Voltage Rail
-10V +2V
VIN
VDD Max4 0V
5V VDD
Cpvin
5v
VDD

PVDD

DRAIN

VDD

PVDD

DRAIN

High-side Control Cbt


IN Cbt
0-5V High-side Control IN
0-5V
SOURCE

SOURCE

XTR20411A
GND

XTR20412A XTR20411B
GND

XTR20412B
Lout VOUT
Normally-ON
-10V
Device
VDD

PVDD

DRAIN

VDD

PVDD

DRAIN

Low-side Control
IN
0-5V Low-side Control
Cout IN
0-5V
SOURCE

SOURCE

XTR20411A
GND

XTR20412A
XTR20411B
GND

XTR20412B

Current
sense Rsns
VSS
-15V

10
POWER management
XTR2041X
35V N-CHANNEL POWER MOSFET WITH FLOATING DRIVER
ORDERING INFORMATION:

Product Package Pin Operating Peak Current


Package RON
Reference Extension Material Count Temperature Capability

XTR20411A- D Ceramic 8 Side-brazed DIP -60°C to +230°C 1.13 Ω 3.9 A


XTR20411A- FE Ceramic 8 Gull-wing flatpack with ePad -60°C to +230°C 1.13 Ω 3.9 A
XTR20412A- T Metal 6 TO-257 -60°C to +230°C 0.33 Ω 8.3 A
XTR20412B- T Metal 6 TO-257 -60°C to +230°C 0.33 Ω 8.3 A

11
power management

XTR2081X
HIGH-TEMPERATURE 80V LOW-SIDE N-CHANNEL POWER MOSFET WITH DRIVER
DESCRIPTION FEATURES
XTR2081x is a family of extremely flexible power N-channel MOSFETs • Operational beyond the -60°C to +230°C temperature
with integrated driver designed for extreme reliability and high range
temperature applications such as DC/DC converters, motor control and • Robust operation as low-side switch with drain spikes
power switching. XTR2081x parts are intended to be used as low side up to 90V.
switches. They can sustain drain spikes up to 100V. XTR2081x parts can • Standard Schmitt-trigger CMOS input
be directly driven by any 5V digital output, making them fully plug-and- • Exists in inverting and non-inverting versions.
play devices, avoiding any time consuming optimization of the matching • Plug-and-play with any digital 5V output.
network between driver and power transistor. • Over current (desaturation) protection with soft turn-
The XTR2081x family is composed of two different dies each with off.
different output maximum current. • Under Voltage LOckout UVLO protection (MOSFET
XTR2081x parts are robust to usual spikes associated with parasitic OFF).
inductors and fast transients in switching applications. • Low on-resistance :
Features of XTR2081x family parts include UVLO (driver state is OFF XTR20811 : 1,7Ω @ 230°C
whenever the supply is too low), desaturation protection of the output XTR20812 : 0,780Ω @ 230°C
transistor with soft shut-down functionality and possibility to select
inversion of control signal. • Large peak current capabilities:
Full functionality is guaranteed from -60°C to +230°C, though operation XTR20811 : 1.6A @ 230°C
well beyond this temperature range is achieved. XTR2081x family XTR20812 : 3.8A @ 230°C
parts have been designed to reduce system cost and ease adoption by • Low On- and Off-time (<100 nsec @ 230°C).
reducing the learning curve and providing smart and easy to use features. • Monolithic design.
The Parts from the XTR2081x family are available in ruggedized through • Latch-up free.
hole hermetic package.

APPLICATIONS
• Reliability-critical, Automotive, Aeronautics & Aerospace, Down-hole.
• DC/DC converters, motor drive, switching power supplies, switching
control.

TYPICAL APPLICATION DIAGRAM

VIN Lout
6-35V VOUT
Rvin

N1 N2
Cpvin
Cout
Rpvdd
Cpvdd

VIN PVDD
VDD

PVDD

DRAIN

VDD
Cvin

ENABLE
/LPMode BDrv
IN
IntlvMode VDD
Cvdd
SOURCE

RT/SYNC SW
Rswth

CKOUT
XTR2081x
GND

SWT ADrv

XTR30014 C3 C2 R4
COMP
PGood
FB
Rocs
PSkipEnbl
VDD

PVDD

DRAIN

OCS
PSkipTh
AsyncEnbl
IN
VOUT
SOURCE
PGND

DCLimit SS/TR
GND

XTR2081x
GND

R3 C1

R1
R2

Rsense

ORDERING INFORMATION:

Product Package Pin Operating Peak Current


Package RON
Reference Extension Material Count Temperature Capability

XTR20811- D Ceramic 8 Side-brazed DIP -60°C to +230°C 1.70 Ω 1.6 A

12
POWER management
XTR7001X
1.5A LOW-DROPOUT VOLTAGE REGULATOR
DESCRIPTION FEATURES
XTR7001x is a family of low-power voltage regulators/references • Operational beyond the -60°C to +230°C temperature
designed for extreme reliability and high temperature applications. range.
Being able to operate with input voltages from 2.8V to 5.5V, • Input voltages from 2.8V to 5.5V.
XTR7001x parts can source a current of 1.5A at +230°C while • High output current with low dropout:1.5A @ 230°C
providing excellent regulation characteristics with a dropout as with 1.9V dropout (1A with 1.2V dropout)
low as 1.9V. Moreover, it can supply a large range of • Up to 32 possible discrete output voltages from same
output voltages from 0.5V to 3.6V thanks to an accurate current part:
mode bandgap reference. From 0.5V to 3.6V by step of 100mV.
Six protection systems are implemented to ensure a good operation • Possible Vout selection based on an external resistive
and reliability of the circuit: UVLO, Short-circuit hiccup mode, divider.
thermal shutdown, fast output overshoot killer, soft turn-off and • No minimum dropout imposed (current limited).
power supply supervision in case of bad input decoupling. • Low current consumption in full-power (1.3mA), low-
XTR7001x parts can be used on a wide range of applications power modes (550µA) and stand-by (<20μA) modes.
such as high fan-out and low dropout regulators/references, adjustable • Output Overshoot Remover system.
power supply, current sources, as well as precision • Over current protection (hiccup mode).
bridge excitation. • Customer selectable Thermal Shutdown protection.
Special design techniques were used allowing XTR7001x parts • Customer selectable Thermal Shutdown threshold.
to offer a precise, robust and reliable operation in critical applications. • UVLO protection.
Full functionality is guaranteed from -60°C to +230°C, • Power supply protection for insufficiently decoupled
though operation well below and above this temperature range is networks.
achieved. • Accurate bandgap reference (+/-4%).
XTR7001x parts have been designed to reduce system cost and • Low noise under 45µVrms typ.
ease adoption by reducing the learning curve and providing smart • Soft startup and soft shutdown.
and easy to use features. • Stable over a wide range of load capacitance (10nF to
Parts from the XTR7001x family are available in ruggedized SMT 33µF).
and thru-hole packages. Parts are also available as tested dies. • Low temperature dependence (20 ppm/°C).
• Excellent line regulation (<0.25%/V @ 230°C).
• Excellent load regulation (<2.6%/A @ 230°C).
APPLICATIONS • Monolithic design for high-reliability.
• Latch-up free.
• Reliability-critical, Automotive, Aeronautics & Aerospace, Down-hole. • Ruggedized SMT and thru-hole packages.
• High-efficiency regulated power supplies, bridge excitation, cable- or • Also available as tested die.
battery-powered applications.

VOUT selected using internal reference and resistor divider VOUT selected using internal reference only

PCBt rack
parasitic resistance

VIN VIN VOUT Vout VIN VIN VOUT

XTR70011 R1 XTR70011
GND

Cin1
GND

Cin1
xxV

/SHDN VOUTSNS /SHDN VOUTSNS

Cin2 Cout RL Cin2 Cout RL


Rin C1 Rin
R2

ORDERING INFORMATION:

Product Package Pin Operating


Package
Reference Extension Material Count Temperature

XTR70010- TD - - Tested Die -60°C to +230°C


XTR70011- FE Ceramic 10 Gull-wing flat pack with ePad -60°C to +230°C
XTR70015- D Ceramic 8 Side-brazed DIP -60°C to +230°C

13
power management

XTR7002X
HIGH INPUT VOLTAGE, 2A POSITIVE LDO REGULATOR
DESCRIPTION FEATURES
XTR7002x is a family of high-temperature, high-input voltage, • Operational beyond the -60°C to +230°C temperature
2Amp ultra low dropout voltage regulators designed for extreme range.
reliability high voltage and high temperature applications. Being • Input voltages from 3.0V to 30V.
able to operate with input voltages from 3.0V to 30V, XTR7002x • Possible output voltages from 0.6V to 30V.
parts can source a current of 2A at +230°C while providing excellent • Accurate bandgap reference (+/-3%).
regulation characteristics with a dropout as low as 1.2V. • No minimum dropout imposed (current limited).
Several preset reference voltages are available from 0.6V to 15V • High output current with low dropout: 1A @ 230°C with
allowing output voltages from 0.6V to virtually 30V. 0.63V, 2A @ 230°C with 1.4V
Four protection features are implemented to ensure a good operation • Low current consumption in full-power (2.3mA) and
and reliability of the circuit: UVLO, hiccup modes shortcircuit low-power modes (950μA).
protection, customer selectable thermal shutdown, soft • Over current protection (hiccup mode).
turn-on/off. • Customer selectable Thermal Shutdown protection.
XTR7002x parts can be used in a wide range of applications • Customer selectable UVLO protection.
such as high fan-out and low-dropout regulators, adjustable power • Low noise : 550uV for Vout=15V / 75uV for Vout=0.9V
supply, current sources, as well as precision bridge excitation. • Soft startup and soft shutdown.
Special design techniques were used allowing XTR7002x parts • Stable over a wide range of load capacitance (0.5uF to
to offer a precise, robust and reliable operation in critical applications. 50μF)
Full functionality is guaranteed from -60°C to +230°C, • Low temperature dependence (40 ppm/°C).
though operation well below and above this temperature range is • Excellent line (0.015%/V) and load (0.15%/A)
achieved. regulations.
XTR7002x parts have been designed to reduce system cost and • Monolithic design for high-reliability.
ease adoption by reducing the learning curve and providing smart • Latch-up free.
and easy to use features.
Parts from the XTR7002x family are available in ruggedized SMT
and thru-hole packages, as well as tested dies.

APPLICATIONS
• Reliability-critical, Automotive, Aeronautics & Aerospace, Down-hole.
• High-efficiency regulated power supplies, bridge excitation, cable- or
battery-powered applications.

TYPICAL APPLICATION DIAGRAM

VIN VINPWR
I VOUT VIN VINPWR
I VOUT Vout
VIN VIN
XTR70021 XTR70021
R1
GND

0. 6V

GND

0. 6V

/SHDN VOUTSNS /SHDN VOUTSNS

Cin1 RL Cin1 RL
Cout Cout
R2

14
POWER management
XTR7002X
HIGH INPUT VOLTAGE, 2A POSITIVE LDO REGULATOR
ORDERING INFORMATION:

Product Package Pin Operating


Package Output Voltage
Reference Extension Material Count Temperature

XTR70020- TD - - Tested Die -60°C to +230°C -


XTR70021- FE Ceramic 10 Gull-wing flat pack with ePad -60°C to +230°C -
XTR70022A- T Metal 3 TO-254 -60°C to +230°C 0.6V
XTR70022B- T Metal 3 TO-254 -60°C to +230°C 0.8V
XTR70022C- T Metal 3 TO-254 -60°C to +230°C 0.9V
XTR70022D- T Metal 3 TO-254 -60°C to +230°C 1.2V
XTR70022E- T Metal 3 TO-254 -60°C to +230°C 1.8V
XTR70022F- T Metal 3 TO-254 -60°C to +230°C 2.2V
XTR70022G- T Metal 3 TO-254 -60°C to +230°C 2.5V
XTR70022H- T Metal 3 TO-254 -60°C to +230°C 2.8V
XTR70022I- T Metal 3 TO-254 -60°C to +230°C 3.3V
XTR70022J- T Metal 3 TO-254 -60°C to +230°C 5.0V
XTR70022K- T Metal 3 TO-254 -60°C to +230°C 5.5V
XTR70022L- T Metal 3 TO-254 -60°C to +230°C 7.5V
XTR70022M- T Metal 3 TO-254 -60°C to +230°C 8.0V
XTR70022N- T Metal 3 TO-254 -60°C to +230°C 9.0V
XTR70022O- T Metal 3 TO-254 -60°C to +230°C 10V
XTR70022P- T Metal 3 TO-254 -60°C to +230°C 12V
XTR70022Q- T Metal 3 TO-254 -60°C to +230°C 13V
XTR70022R- T Metal 3 TO-254 -60°C to +230°C 15V
XTR70025- D Ceramic 8 Side-brazed DIP -60°C to +230°C -

15
power management

XTR2602X
ISOLATED INTELLIGENT GATE DRIVER
DESCRIPTION FEATURES
XTR2602x is a high-temperature, high reliability isolated power transistor • Operational beyond the -60°C to +230°C temperature
driver designed to provide a robust, reliable, compact and efficient range.
solution for driving a large variety of high-temperature, high-voltage, and • Supply voltage from 4.5V to 35V.
high-efficiency power transistors. XTR2602x is able to drive normally- • Integrated charge-pump inside pull-up driver allowing
On and normally-Off power transistors in Silicon Carbide (SiC), Gallium 100% duty-cycle PWM control signal.
Nitride (GaN) and standard silicon, including JFETs, MOSFETs, BJTs, • Internal 5V LDO regulator.
SJTs and MESFETs. • Safe start-up of normally-on devices.
The XTR2602x driver implements unprecedented functionality for high- • Isolated data transmission through multi-channel
temperature drivers allowing safe operation at system level by preventing transceiver.
any cross-conduction between high-side and low-side switches, through • Half bridge cross-conduction protection.
isolated communication between high-side and low-side drivers. Other • Pull-up driver with 4A peak current and 1A continuous
features include internal voltage regulator, 4-channel transceivers (2 TX current capability at TC = 230°C.
and 2 RX) for isolated data transmission with the microcontroller and • Pull-down driver with 2.4A peak current capability at
between high side and low side drivers. The XTR2602x includes one pull- TC = 230°C.
up gate-drive-channel (PU_DR) capable of sourcing a typical 4A peak • On-chip active Miller clamp switch.
current and two pull-down gate-drive-channels capable of sinking a typi- • Resistor-programmable Under Voltage LOckout
cal 2.4A peak current (PD_DR and PD_MC). The PD_DR channel is used (ULVO).
for the effective turn-off of the power transistor, while PD_MC channel is • Resistor-programmable over-current protection level
used for Active Miller Clamping (AMC) function thanks to its internal gate (rail-to-rail, positive and negative current sense).
level detection. • Latch-up free.
The circuit includes soft shut-down capability that slowly shuts down the • Ruggedized SMT packages.
power transistor in case of fault. The XTR2602x is able to detect failures • Also available as tested dies.
due to over-current in the power switch (rail-to-rail, positive and negative
current sense) or to UVLO detected on the power supply. In addition,
safe start-up and cross-conduction protections are implemented to
guarantee safe operation at system level.
The XTR2602x can be used standalone but also as a controller with
multiplied drive capabilities using the XTR25020, which is the driver part
of the XTR2602x without the isolation transceiver.

APPLICATIONS
• Reliability-critical, Automotive, Aeronautics & Aerospace, Down-hole,
Energy Conversion, Solar.
• Intelligent Power Modules (IPM).
• Motor drives.
• Uninterruptible power supplies (UPS).
• Power inverters.
• Power conversion and power factor correction (PFC).
• DC/DC converters and switched mode power supplies (SMPS).

16
POWER management
XTR2602X
ISOLATED INTELLIGENT GATE DRIVER
TYPICAL APPLICATION DIAGRAM

VCC_HV (1200V)

VDD HALF BRIDGE DRIVER

PWM_HS
RDY_FLT_HS
XTR40011
PWM_LS
RDY_FLT_LS

VSUPPLY (12-30V) GND


GN D
VCC_HS (+20V)
XTR260
XT R26021
21
S_HS (0V)

VSS_HS (-5V)

Cross-conduction
XTR2N0825 protection
XTR30014 VCC_LS (+20V)

VDD (5V)
GND S_LS (0V)

VSS_LS (-5V)
XTR26021
GND
GND
GND
GND (0
(0V)
V)

GND_HV (0V)

ORDERING INFORMATION:

Product Package Pin Operating


Package
Reference Extension Material Count Temperature

XTR26020- TD - - Tested Die -60°C to +230°C


XTR26021- LJ Ceramic 28 Leaded J Chip Carrier -60°C to +230°C

17
power management

XTR2501X
POWER GATE DRIVER
DESCRIPTION FEATURES
XTR2501x is a high-temperature, high reliability power transistor driver • Operational beyond the -60°C to +230°C temperature
integrated circuit designed to drive normally ON and nor-mally-OFF range.
power transistors in Silicon Carbide (SiC), Gallium Nitride (GaN) and • High voltage supply from 7V to 35V.
standard silicon, including JFETs,MOSFETs, BJTs, SJTs and MESFETs. • Low voltage supply from 4.5V to 5.5V
For turning on the power transistors, the XTR2501x includes two • Integrated charge-pump inside pull-up drivers
independent pull-up gate-drive-channels (PU_DR1 and PU_DR2) capable allowing 100% duty-cycle PWM control signal.
of sourcing 4A at 230°C peak current each. For turning off the power • Double pull-up drivers with combined 8A peak and 2A
transistors, the XTR2501x includes two pull-down gate-drive-channels continuous current capability at TC=230°C.
capable of sinking 3A at 230°C peak current each (PD_DR and PD_MC). • Two pull-down drivers with 3A peak current capability
For driving wide bandgap transistors, it is recommended to use at TC=230°C for each driver.
XTR2501x as a power stage extension for the XTR2601x, which • Nonoverlapped pull-up and pull-down outputs.
generates the needed control signals and additional protection functions • Enable input signal for driver outputs reset.
(see XTR2601x datasheet and application note for more details). • Latch-up free.
XTR2501x can also be used standalone as a half-bridge driver for DC-DC • Ruggedized SMT packages.
converters and motor drive. • Also available as tested dies.

APPLICATIONS
• Reliability-critical, Automotive, Aeronautics & Aerospace, Down-hole.
• Intelligent Power Modules (IPM).
• Power inverters.
• Power conversion and motor drive.
• DC-DC converters and switched mode power supplies.

TYPICAL APPLICATION DIAGRAM


VDD

PWM_HS XTR40010 VHV_BUS (1200V)

GND

VCC_HS

XTR25010
S_HS XTR26010

VSUPPLY VSS_HS

Isolated VCC_LS

Power
XTR25010
Supply XTR26010
S_LS

VSS_LS
GND
VDD( 5V)
GND_BUS( 0V)
VDD

PWM_LS XTR40010
GND( 0V)

GND

18
POWER management
XTR2501X
POWER GATE DRIVER
ORDERING INFORMATION:

Product Package Pin Operating


Package
Reference Extension Material Count Temperature

XTR25010- TD - - Tested Die -60°C to +230°C


XTR25011- LJ Ceramic 52 Leaded J Chip Carrier -60°C to +230°C

19
power management

XTR2502X
INTELLIGENT GATE DRIVER
DESCRIPTION FEATURES
XTR2502x is a high-temperature, high reliability intelligent power transistor • Operational beyond the -60°C to +230°C temperature
driver designed to provide a robust, reliable, compact and efficient solution for range.
driving a large variety of high-temperature, high-voltage, and high-efficiency • Supply voltage from 4.5V to 35V.
power transistors. XTR2502x is able to drive normally-On and normally-Off • Integrated charge-pump inside pull-up driver allowing
power transistors in Silicon Carbide (SiC), Gallium Nitride (GaN) and standard 100% duty-cycle PWM control signal.
silicon, including JFETs, MOSFETs, BJTs, SJTs and MESFETs. • Internal 5V LDO regulator.
The XTR2502x includes one pull-up gate-drive-channel (PU_DR) capable of • Safe start-up of normally-on devices.
sourcing a typical 3A peak current and two pull-down gate-drive-channels • Half bridge cross-conduction protection.
capable of sinking a typical 3A peak current (PD_DR and PD_MC). The PD_DR • Pull-up driver with 3A peak current and 1A continuous
channel is used for the effective turn-off of the power transistor, while PD_MC current capability.
channel is used for Active Miller Clamping (AMC) function thanks to its internal • Pull-down driver with 3A peak current capability.
gate level detection. • On-chip active Miller clamp switch with 3A capability.
The circuit includes soft shut-down capability that slowly shuts down the • Resistor-programmable Under Voltage LOckout
power transistor in case of fault. The XTR2502x is able to detect failures due (ULVO).
to over-current in the power switch or to UVLO detected on the power supply. • Resistor-programmable over-current protection level
In addition, safe start-up and cross-conduction protection are implemented to (rail-to-rail, positive and negative current sense).
guarantee safe operation at system level. • Independent control of output drivers functionality
The XTR2502x can be used to extend the drive capability of the XTR2602x. (without internal cross-conduction prevention
It can also be used with the XTR4001x to drive multiple power transistors between pull-up and pull-down drivers).
connected in parallel for very high power applications. • Latch-up free.
• Ruggedized SMT packages.
APPLICATIONS
• Reliability-critical, Automotive, Aeronautics & Aerospace, Down-hole.
• Intelligent Power Modules (IPM).
• Power inverters.
• Power conversion and motor drive.
• DC/DC conversion and switched mode power supplies.

TYPICAL APPLICATION DIAGRAM

MULTI-TRANSISTOR HALF BRIDGE DRIVER VCC_HV (1200V)

RDY_FLT

RDY_FLT

RDY_FLT
XCOND_OUT

VCC_HS (+20V) XTR25021


XCOND_OUT

S_HS (0V) (HS)


XCOND_OUT

VSS_HS (-5V)
VDD

VSS

VDD (+5V)
PWM_HS
XTR40011
RDY_FLT_HS
Cross-conduction
XTR40011 protection
PWM_LS
XTR40011
RDY_FLT_LS
GND (0V)
VDD VSS
RDY_FLT

RDY_FLT

RDY_FLT
XCOND_OUT

VCC_LS (+20V) XTR25021


XCOND_OUT

S_LS (0V) (LS)


XCOND_OUT

VSS_LS (-5V)

GND_HV (0V)

20
POWER management
XTR2502X
INTELLIGENT GATE DRIVER
ORDERING INFORMATION:

Product Package Pin Operating


Package
Reference Extension Material Count Temperature

XTR25021- LJ Ceramic 28 Leaded J Chip Carrier -60°C to +230°C

21
power management

XTR2541X
35V FLOATING DRIVER
DESCRIPTION FEATURES
The XTR2541x gate driver family is an extremely flexible floating • Operational beyond the -60°C to +230°C temperature
driver allowing the control of either PMOS or NMOS transistors range.
(VGS=5V) and designed for extreme reliability and high temperature • Drives P- as well as N-channel MOSFETs (VGS=5V).
applications. XTR2541x is intended to drive both high-side • Input-to-output stages offset voltage from -30V to
and low-side switches by converting the digital input signal into a +35V.
floating control signal referenced to PVDD-PGND. The driver • Operation as low-side or high-side driver.
operates in both negative and positive configurations with possible • Under Voltage Lockout (UVLO) on PVDD domain.
offsets between input and output of -30V to +35V. • Standard Schmitt-trigger CMOS input.
XTR2541x parts can be directly driven by any digital output, making • Plug-and-play with any digital 3.5V to 5V output.
them fully plug-and-play devices. This driver features full • Up to 1A sink/source current (@ Tj=+230°C).
short circuit protection by means of desaturation detection of the • Desaturation protection for both P- and N-channel
external transistor after a blanking time, with soft turn-off feature MOSFETs.
and reporting the fault through the ERR pin. Undervoltage protections • Soft-shutdown function in case of desaturation
are provided for floating voltage power supplies. The device detected.
also includes an Error status output that can be used as an Enable. • Error reporting to digital controller.
Full functionality is guaranteed from -60°C to +230°C, though • Monolithic design.
operation well below and above this temperature range is achieved. • Latch-up free
XTR2541x family parts have been designed to reduce system
cost and ease adoption by reducing the learning curve and
providing smart and easy to use features. Parts from the XTR2541x
family are available in ruggedized through hole hermetic package.

APPLICATIONS
• Reliability-critical, Automotive, Aeronautics & Aerospace, Down-hole.
• MOSFET or GaN driving, power converters, switching power supplies,
motor drive, floating or ground-connected switches, intelligent power
switches (IPS).

TYPICAL APPLICATION DIAGRAM

22
POWER management
XTR2541X
35V FLOATING DRIVER
BLOCK DIAGRAM

INVERT BD PVDD2 N_/P

VDD FLT-PVDD
PVDD
UVLO
PVDD

IN PGND
OUT
Input Level
Buffer
N_/P Section Shifter
N_/P
ERR Desat
FLT-SC
Fault FLT-PVDD Desat
Logic FLT-SC
GND PGN D
XTR25410

ORDERING INFORMATION:

Product Package Pin Operating


Package
Reference Extension Material Count Temperature

XTR25411- D Ceramic 16 Side-brazed DIP -60°C to +230°C

23
power management

XTR7501X
POSITIVE SERIES VOLTAGE REGULATOR
DESCRIPTION FEATURES
XTR7501x is a family of low-power voltage regulators/references • Operational beyond the -60°C to +230°C temperature
designed for extreme reliability and high temperature applications. Being range.
able to operate with input voltages from 2.8V to 35V, XTR7501x parts • Up to 10 possible output voltages with the same part:
can supply up to 50mA at +230°C while providing excellent regulation 1.2V / 1.8V / 2.5V / 3.3V / 5V / 5.5V / 9V / 10V / 12V /
characteristics. Parts from this product family operate as a 3-terminal 15V.
series regulator/reference with a temperature coefficient (TC) as low • Input voltage from 2.8V to 35V.
as 40ppm/°C. Up to ten possible output voltages (1.2V to 15V) can be • Drop-in replacement of commercial voltage
obtained from the same part. references.
Functionality features include shut-down mode and soft-start. • Trimming capabilities.
XTR7501x parts can be used in a wide range of applications such as • Output current up to 50mA @ 230°C.
positive and negative regulators/references, adjustable power supply, • Soft-start.
current sources, as well as precision bridge excitation. • Compatible with low and high dropout voltages.
Special design techniques were used allowing XTR7501x parts to offer • Stable over a wide range of load capacitance (0.1μF to
a precise, robust and reliable operation in critical applications. Full 10μF).
functionality is guaranteed from -60°C to +230°C, though operation well • Low intrinsic current consumption (380μA @ 230°C).
below and above this temperature range is achieved. • Low temperature dependence (40ppm/°C).
XTR7501x parts have been designed to reduce system cost and ease • Excellent line regulation (0.75% @ 230°C).
adoption by reducing the learning curve and providing smart and easy to • Active-low shutdown control.
use features. • Monolithic design for high-reliability.
Parts from the XTR7501x family are available in ruggedized SMT and • Latch-up free SOI process.
thru-hole packages. Parts are also available as tested dies. See also the
Application Notes in the XTR7501x webpage.

APPLICATIONS
• Reliability-critical, Automotive, Aeronautics & Aerospace, Down-hole.
• Positive and negative precision regulators/references, A/D and D/A
converters, current sources, bridge excitation.

TYPICAL APPLICATION DIAGRAM

24
POWER management
XTR7501X
POSITIVE SERIES VOLTAGE REGULATOR
ORDERING INFORMATION:

Product Package Pin Operating Output Voltage versus Package


Package
Reference Ext. Material Count Temperature 1.2V 1.8V 2.5V 3.3V 5V 5.5V 9V 10V 12V 15V
XTR75010- TD - - Tested Die -60°C to +230°C
XTR75011- D Ceramic 16 Side-brazed DIP -60°C to +230°C
XTR75011- S Ceramic 16 SOIC -60°C to +230°C
XTR75014- D Ceramic 8 Side-brazed DIP -60°C to +230°C
Gull-wing flat
XTR75014- FE Ceramic 8 -60°C to +230°C
pack with ePad
XTR75015- D Ceramic 8 Side-brazed DIP -60°C to +230°C
Gull-wing flat
XTR75015- FE Ceramic 8 -60°C to +230°C
pack with ePad

25
power management
NEW
XTR7503X
NEGATIVE SERIES VOLTAGE REGULATOR
DESCRIPTION FEATURES
XTR7503x is a family of low-power voltage regulators/references • Up to 10 possible output voltages from same part:
designed for extreme reliability and high temperature applications. Being -1.2V / -1.8V / -2.5V / -3.3V / -5V / -5.5V / -9V / -10V
able to operate with input voltages from -35V to -2.8V, XTR7503x parts -12V / -15V.
can supply up to 50mA at +230°C while providing excellent regulation • Input voltage from -35V to -2.8V.
characteristics. Parts from this product family operate as a 3-terminal • Drop-in replacement of commercial voltage
series regulator/reference with a temperature coefficient (TC) as low as references.
40ppm/°C. Up to ten possible output voltages (-15V to -1.2V) can be • Trimming capabilities.
obtained from the same part. • Operational beyond the -60°C to +230°C temperature
Functionality features include shut-down mode and soft-start. range.
XTR7503x parts can be used in a wide range of applications such as • Output current up to 50mA @ 230°C.
positive and negative regulators/references, adjustable power supply, • Soft-start.
current sources, as well as precision bridge excitation. • Compatible with low and high dropout voltages.
Special design techniques were used allowing XTR7503x parts to offer • Stable over a wide range of load capacitance (0.1µF to
a precise, robust and reliable operation in critical applications. Full 10µF).
functionality is guaranteed from -60°C to +230°C, though operation well • Low intrinsic current consumption (380µA @ 230°C).
below and above this temperature range is achieved. • Low temperature dependence (40ppm/°C).
XTR7503x parts have been designed to reduce system cost and ease • Excellent line regulation (0.75% @ 230°C).
adoption by reducing the learning curve and providing smart and easy • Active-low shutdown control.
to use features. • Monolithic design for high-reliability.
Parts from the XTR7503x family are available in ruggedized SMT and • Latch-up free SOI process.
thru-hole packages. See also the Application Notes in the XTR7503x • Ruggedized SMT and thru-hole packages.
webpage.

APPLICATIONS
• Reliability-critical, Automotive, Aeronautics & Aerospace, Down-hole.
• Positive and negative precision regulators/references, A/D and D/A
converters, current sources, bridge excitation.

TYPICAL APPLICATION DIAGRAM

- 1.8V Voltage Regulator/Reference -12V Voltage Regulator with External Gain/or TRIM

XTR75031 XTR75031

VIN Vout=-1.8V VIN VIN VOUT Vout=-12V


GND12V

VIN VOUT
GND1V8

GND

RA
GND

ENABLE VOUT_RANGE ENABLE VOUT_RANGE

ENABLE ENABLE
Cin RB Cout
Cin Cout

26
POWER management
XTR7503X
NEGATIVE SERIES VOLTAGE REGULATOR
ORDERING INFORMATION:

Product Output Voltage versus Package


Package Pin Operating
Package - - - - -
Reference Ext. Material Count Temperature - 5V - 9V - 10V - 12V - 15V
1.2V 1.8V 2.5V 3.3V 5.5V

XTR75030- TD - - Tested Die -60°C to +230°C

XTR75031- D Ceramic 16 Side-brazed DIP -60°C to +230°C

XTR75031- S Ceramic 16 SOIC -60°C to +230°C

XTR75034- D Ceramic 8 Side-brazed DIP -60°C to +230°C

XTR75034- Gull-wing flat pack


FE Ceramic 8 -60°C to +230°C
with ePad

XTR75035- D Ceramic 8 Side-brazed DIP -60°C to +230°C

27
power management

XTR431
PROGRAMMABLE SHUNT REGULATOR
DESCRIPTION FEATURES
XTR431 is a high-reliability, high-temperature version of the well known • Operational beyond the -60°C to +230°C temperature
“431” shunt voltage regulator. It operates as a 3-terminal shunt regulator range.
with an total drift of the reference voltage as low as 35mV (typical). The • Adjustable output voltage from 2.5V to 35V.
output voltage may be set from 2.55V to 35V by selecting the value of • Low dynamic output impedance.
two external resistors implementing a divider network. • Sink current capability 500μA to 50mA
The XTR431 is able to reliably operate over a wide range of currents from • Low temperature coefficient (ΔVREF=35mV typ).
500μA to 50mA and load capacitors from 27nF and up. Functionality • 2.55V reference with 6% accuracy.
features include shut-down mode and low dy-namic output impedance. • Fast turn-on response.
This part can be used as a high-reliability, high-temperature re- • Shut-down mode.
placement of zener diodes in many applications such as on-board • Stable over a continuous range of load capacitors
regulation, adjustable power supply and switching power supplies. The (27nF min).
fact of operating as a zener diode makes the XTR431 convenient to be • Monolithic design.
used as a positive or negative regulator.
Special design techniques were used allowing the XTR431 parts to
offer a precise, robust and reliable operation in critical applications. Full
functionality is guaranteed from -60°C to +230°C, though operation well
below and above this temperature range is achieved.
The XTR431 has been designed to reduce system cost and ease
adoption by reducing the learning curve and providing smart and easy
to use features.
XTR431 is available in ruggedized SMT and thru-hole packages. Parts are
also available as tested dies.

APPLICATIONS
• Reliability-critical, Automotive, Aeronautics & Aerospace, Down-hole.
• Shunt regulators, voltage clamping, voltage references, voltage
regulators, switching regulators, feedback networks, volt-age
monitors, current sources.

TYPICAL APPLICATIONS DIAGRAM

Rlim Rlim
VIN VIN VIN
Rlim

VKA VKA VKA Rz


2.5-35V 2.5-35V 2.5-35V

R1 R1 R1

Cout Cload
Cout Cload
R2 R2 R2

28
POWER management
XTR431
PROGRAMMABLE SHUNT REGULATOR
ORDERING INFORMATION:

Product Package Pin Operating


Package
Reference Extension Material Count Temperature

XTR431- TD - - Tested Die -60°C to +230°C


XTR431- FE Ceramic 8 Gull-wing flat pack with ePad -60°C to +230°C
XTR431- D Ceramic 8 Side-brazed DIP -60°C to +230°C

29
Clock & Timing
XTR65X
VERSATILE TIMER
DESCRIPTION FEATURES
XTR65x is a family of highly stable, small footprint and versatile timers • Operational beyond the -60°C to +230°C
designed for extreme reliability and temperature applications such as temperature range.
accurate time delays or frequency generators. Being able to operate • Supply voltage from 2.8V to 5.5V.
from supply voltages from 2.8V to 5.5V, the XTR65x timers can generate • Monostable, Astable, PWM and PPM modes of
timing periods from some hundreds of nanoseconds and oscillations operation.
with duty-cycles from virtually zero to 100%, overcoming the limitations • Complementary, non-overlapping outputs.
of existing 555. • Outputs can source or sink 50mA @ 230°C.
Other features include the availability of high current complementary • Complementary high-voltage open-drain outputs.
and non-overlapping outputs, complementary high-voltage open- • XTR655: drop-in replacement of 555.
drain outputs, integrated timing capacitor of 200pF for reduced bill-of- • DISABLE mode.
material (BoM), and integrated coarse temperature sensor. • Integrated timing capacitor of 200pF for reduced
Especial design techniques were used allowing the XTR65x parts to BoM.
offer a precise, robust and reliable operation in critical applications. Full • Integrated coarse temperature sensor.
functionality is guaranteed from -60°C to +230°C, though operation • Several packaging options including drop-in
well below and above this temperature range is achieved. replacement of 555.
XTR65x has been designed to reduce system cost and ease adoption • Monolithic design for high-reliability.
by reducing the learning curve and providing smart and easy to use • Latch-up free SOI process.
features.
Parts from the XTR65x family are available in ruggedized thru-hole
package, as well as tested dies.

APPLICATIONS
• Reliability-critical, Automotive, Aeronautics & Aerospace, Down-
hole.
• Timing and pulse generation, frequency generation, pulse width
modulation (PWM), pulse position modulation (PPM), linear ramp
generator.

TYPICAL APPLICATION DIAGRAM


ASTABLE CONFIGURATIONS
VDD VDD

Freq =1 .44/[(RA+RB)x 200pF] Freq =1 .44/[(RA+2RB)x C]

Duty-cycle =R A/(RA+RB) Duty-cycle=( RA+RB)/(RA+2RB)


RA
/DISABLE

VDD

/DISABLE

VDD

TEMPER
CHARGE TEMPER
RA

/OUT
RB

THRESHOLD /OUT THRESHOLD

200pF XTR651 OUT


OUT
XTR655 OUT
OUT

/TRIGGER /TRIGGER
RB

C
DISCHARGE CONTROL_V DISCHARGE CONTROL_V
GND

GND

CCV CCV

VDD VDD
MONOSTABLE CONFIGURATIONS
/DISABLE

VDD

/DISABLE

VDD

TEMPER TEMPER
CHARGE TEMPER CHARGE TEMPER
RA

t= 1.1 xR A x 200pF t= 1.1x RA x2 00pF


/OUT t 2/3V DD /OUT
THRESHOLD /OUT THRESHOLD /OUT
t
200pF XTR651 OUT
OUT
t
200pF XTR651 OUT
OUT t

/TRIGGER /TRIGGER
1/3V DD
RA

DISCHARGE CONTROL_V DISCHARGE CONTROL_V


GND

GND

CCV CCV

30
XTR65X
VERSATILE TIMER
ORDERING INFORMATION:

Product Package Pin

Clock & timing


Package OperatingTemperature
Reference Extension Material Count

XTR650- TD - Tested Die -60°C to +230°C


XTR651- D Ceramic 14 Side brazed DIP -60°C to +230°C
XTR655- D Ceramic 8 Side brazed DIP -60°C to +230°C

31
clock & timing
XTR6001X
CRYSTAL OSCILLATOR DRIVER
DESCRIPTION FEATURES
XTR6001x is a family of small footprint high-temperature, extended • Operational beyond the -60°C to +230°C temperature
lifetime crystal oscillator drivers offering extended functional range.
features and designed for extreme reliability applications • Supply voltage from 2.5V to 5.5V.
such as crystal oscillators, clock and time-base generators. Being • Monolithic crystal oscillator driver controller.
able to operate from supply voltages from 2.5V to 5.5V, the • Operational from 32kHz to 25MHz.
XTR6001x crystal oscillator driver can operate with crystals from • Automatically adapts to used crystal.
32kHz to 25MHz.. • Integrated capacitors for reduced Bill-of-Material
Functionality features include selectable prescaler (1/128), • Selectable low-power mode.
programmable frequency divider (1/2/4/8), operation in low-power • Selectable 1/128 prescaler.
mode for low frequency crystals, integrated capacitors for crystal • Programmable Freq/1, Freq/2, Freq/4, Freq/8 divider.
loading and stand-by mode which stops oscillations and sets the output • Stand-by functionality with output buffer in High-Z
buffer to the high-Z state. Using the internal prescaler and frequency state.
divider, division factors from 1 to 1024 can be obtained. The internal • Separate oscillator and buffer supply pins for low-
crystal driver has automatic gain control to be able to accommodate noise operation.
to the used crystal, with no intervention needed from the customer, as • Latch-up free.
required by some competing products.
Special design techniques were used allowing the XTR6001x
parts to offer a precise, robust and reliable operation in critical
applications. Full functionality is guaranteed from -60°C to
+230°C, though operation well below and above this temperature
range is achieved.
XTR6001x family parts have been designed to reduce system
cost and ease adoption by reducing the learning curve and
providing smart and easy to use features.
Parts from the XTR6001x family are available in ruggedized thru-hole
package.

APPLICATION
• Reliability-critical, Automotive, Aeronautics & Aerospace, Down-hole.
• Crystal oscillators, clock generation, time-base generator, precision
timing.

TYPICAL APPLICATION DIAGRAM

VDD VDD
2.8V-5V VDDD OUT OUT 2.8V-5V VDD OUT OUT
CVDDD CVDD
RVDDA /StdBy /StdBy /StdBy /StdBy
GNDD GND
/LPMode /LPMode XTR60012 /LPMode /LPMode
VDDA XTR60011 /DIV_1 /DIV_1
CVDDA /DIV_0 /DIV_0
X1

X2

/DIV_0 /DIV_0

GNDA /PrsSelect /PrsSelect


C1_10

C1_20

C2_20

C2_10

XTAL
X1

X2

XTAL C1 C2

32
XTR6001X
CRYSTAL OSCILLATOR DRIVER
ORDERING INFORMATION:

Clock & timing


Product Package Pin
Package OperatingTemperature
Reference Extension Material Count

XTR60011- D Ceramic 16 Side brazed DIP -60°C to +230°C


XTR60012- D Ceramic 8 Side brazed DIP -60°C to +230°C

33
Discretes
XTR1N04XX/XTR1N08XX
GENERAL PURPOSE DIODES
DESCRIPTION FEATURES
This diode family is a general purpose diodes with a reverse voltage. • Operational beyond the -60°C to +230°C temperature
Each part is composed of four independent diodes which can be used range.
individually, in half- or full-bridge rectifier architecture or connected in • Reverse voltage 55V (for XTR1N04xx) and 90V (for
series or parallel. XTR1N08xx).
Typical applications include rectification, demodulation, voltage blocking, • Forward current @ 230°C, VF=1.2V:
voltage clamping, power supplies, charge pumps and voltage multipliers.
Full functionality is guaranteed from -60°C to +230°C, though operation - XTR1N0415: IF=280mA per diode.
well below and above this temperature range is achieved. - XTR1N0450: IF=800mA per diode.
- XTR1N0815: IF=216mA per diode.
APPLICATIONS - XTR1N0850: IF=660mA per diode.

• Reliability-critical, Automotive, Aeronautics & Aerospace, Down-hole. • Forward voltage @ 85°C, IF=1mA:
• General rectification, voltage blocking and clamping, power supplies.
- XTR1N0415: VF=622mV per diode.
- XTR1N0450: VF=585mV per diode.
- XTR1N0815: VF=640mV per diode.
- XTR1N0850: VF=600mV per diode.

• Monolithic design for high-reliability.


• Latch-up free SOI process.

TYPICAL APPLICATION DIAGRAM

XTR1N0415

XTR1N0450 XTR1N0450

VIN VOUT
<40Vpp
Rvin

Cpvin Resr
XTR1N0415

Cout1 Cout2
X7R NP0

Diode #1
PWM Control
&
Driver
Cvin

34
XTR1N04XX/XTR1N08XX
GENERAL PURPOSE DIODES
ORDERING INFORMATION:

Product Reference Package Pin Operating Diode 40V Diode 80V


Package
Reference Extension Material Count Temperature VR>55, IF 320mA, VF VR>55V, IF 1150mA, VF VR>90V, IF 165mA, VF VR>90V, IF 570mA, VF

XTR1N0415- TD - - Tested Die -60°C to +230°C


XTR1N0415- D Ceramic 8 Side brazed DIP -60°C to +230°C
Gull-wing flat
XTR1N0415- FE Ceramic 8 -60°C to +230°C
pack with ePad
XTR1N0415- T Metal 3 TO18 -60°C to +230°C
XTR1N0450- TD - - Tested Die -60°C to +230°C
XTR1N0450- D Ceramic 8 Side brazed DIP -60°C to +230°C
XTR1N0815- TD - - Tested Die -60°C to +230°C
XTR1N0815- D Ceramic 8 Side brazed DIP -60°C to +230°C
XTR1N0850- TD - - Tested Die -60°C to +230°C

Discretes
XTR1N0850- D Ceramic 8 Side brazed DIP -60°C to +230°C

35
discretes

XTR1K1210
10A, 1200V SiC SCHOTTKY DIODE
DESCRIPTION FEATURES
XTR1K1210 is 10A, 1200V 4H-SiC junction barrier Schottky diode able to • Operational beyond the -60°C to +230°C
reliably operate from -60°C to +230°C, with junction temperature able to temperature range.
reach +250°C. • Reverse voltage up to 1200V.
This diode has zero reverse recovery charge, which makes it ideally suited • Forward voltage for IF=10A:
for high-frequency and high-efficiency power sys-tems with minimum or
no cooling requirements. - VF=1.7V @+25°C.
XTR1K1210 has been designed to reduce system cost and ease adoption. - VF=3.7V @+230°C.

APPLICATIONS • Positive temperature coefficient for safe operation


and ease paralleling.
• Reliability-critical, Automotive, Aeronautics & Aerospace, Down-hole. • Extremely fast switching not dependent on
• Power converters, motor drives, switched-mode power supplies, temperature.
power factor conversion. • Essentially no reverse or forward recovery.

TYPICAL APPLICATION DIAGRAM

XTR1K1210

Rectifier XTR1K1210

PFC Cpvin PWM

ORDERING INFORMATION:

Product Reference Package Pin Operating


Package
Reference Extension Material Count Temperature

XTR1K1210- T Metal 3 TO257 -60°C to +230°C

36
XTR2N0X07
Small-Signal P- and N- Channel MOSFETs
DESCRIPTION FEATURES
XTR2N0307 (PMOS) and XTR2N0807 (NMOS) are small signal MOSFETs • Operational beyond the -60°C to +230°C temperature
designed to reliably operate over a wide range of temperatures. Full range.
functionality is guaranteed from -60°C to +230°C, though operation well • Minimum BVDSS = -30V (PMOS) and 90V (NMOS)
below and above this temperature range is achieved. • Allowed VGS range -5.5V to +5.5V.
Fabricated on a Silicon-on-Insulator (SOI) process, XTR2N0307 and
XTR2N0807 parts offer reduced leakage currents while providing • Low RDS (on)
moderate drain currents a low RDS(on). These features allow XTR2N0307
and XTR2N0807 parts to be ideally suited for switching and signal - XTR2N0307: 6.7 Ω @ 230°C
amplification applications. - XTR2N0807: 9.5 Ω @ 230°C

APPLICATIONS • Maximum ID:

• Reliability-critical, Automotive, Aeronautics & Aerospace, Down-hole. - XTR2N0307: 1 A @ 230°C


• Signal amplification, sensor interfacing, level shifting, signal - XTR2N0807: 600 mA @ 230°C
switching, power supply.
• Monolithic design for high-reliability.
• Latch-up free SOI process.
TYPICAL APPLICATION DIAGRAM

Discretes
Rlim1
VIN VOUT
Rlim2

XTR2N0307

Cout
R1

R2

ORDERING INFORMATION:

Product Reference Package Pin Operating


Package RDSON Maximum ID
Reference Extension Material Count Temperature

XTR2N0307- TD - - Tested Die -60°C to +230°C 6.70 Ω 1.0 A


XTR2N0307- T Metal 3 TO18 -60°C to +230°C 6.70 Ω 1.0 A
XTR2N0307- FE Ceramic 8 Gull-wing flat pack with ePad -60°C to +230°C 6.70 Ω 1.0 A
XTR2N0807- TD - - Tested Die -60°C to +230°C 9.50 Ω 0.6 A
XTR2N0807- T Metal 3 TO18 -60°C to +230°C 9.50 Ω 0.6 A
XTR2N0807- FE Ceramic 8 Gull-wing flat pack with ePad -60°C to +230°C 9.50 Ω 0.6 A

37
discretes

XTR2N03XX/XTR2N05XX
P-CHANNEL POWER MOSFETs
DESCRIPTION FEATURES
XTR2N03xx/XTR2N05xx transistor family is a P-channel power • Operational beyond the -60°C to +230°C temperature
MOSFETs designed to reliably operate over a wide range of temperatures. range.
Full functionality is guaranteed from -60°C to +230°C, though operation • Minimum BVDSS = -30V (for XTR2N03xx) and -40V (for
well below and above this temperature range is achieved. XTR2N05xx)
Fabricated on a Silicon-on-Insulator (SOI) process, XTR2N03xx and • Allowed VGS range –5.5V to +5.5V.
XTR2N05xx parts offer reduced leakage currents while providing high • Low RDS (on)
drain currents a low RDS (on). These features allow XTR2N03xx and
XTR2N05xx parts to be ideally suited for switching applications. - XTR2N0325: 1.05 Ω @ 230°C
XTR2N03xx and XTR2N05xx parts have been designed to reduce system - XTR2N0350: 0.48 Ω @ 230°C
cost and ease adoption by reducing the learning curve and providing - XTR2N0525: 2.3 Ω @ 230°C
smart and easy to use features. - XER2N0525: 2.3 Ω @ 230°C
- XTR2N0550: 1.1 Ω @ 230°C
APPLICATIONS
• Maximum Peak ID:
• Reliability-critical, Automotive, Aeronautics & Aerospace, Down-hole.
• DC/DC converters, power switching, motor control, power inverters, - XTR2N0325: 7.5A @ 230°C
power linear regulators, power supply. - XTR2N0350: 16.5A @ 230°C
- XTR2N0525: 5.3A @ 230°C
- XER2N0525 : 5.3A @ 230°C
- XTR2N0550: 11.7A @ 230°C

• Ruggedized 3-lead TO257, 8-lead side brazed DIP and


8-lead SOIC with ePAD.
• Also available as tested dies.

TYPICAL APPLICATION DIAGRAM

38
XTR2N03XX/XTR2N05XX
P-CHANNEL POWER MOSFETs
ORDERING INFORMATION:

Product Reference Maximum


Package Pin Operating Minimum RDS(ON)
Package Peak ID
Reference Extension Material Count Temperature BVDSS @ 230°C
@230°C
XTR2N0325- TD - - Tested Die -60°C to +230°C -30V 1.05 Ω 7.5 A
XTR2N0325- D Ceramic 8 Side brazed DIP -60°C to +230°C -30V 1.05 Ω 7.5 A
XTR2N0325- FE Ceramic 8 Gull-wing flat pack with ePad -60°C to +230°C -30V 1.05 Ω 7.5 A
XTR2N0350- TD - - Tested Die -60°C to +230°C -30V 0.48 Ω 16.5 A
XTR2N0350- T Metal 3 TO-257 -60°C to +230°C -30V 0.48 Ω 16.5 A
XTR2N0525- TD - - Tested Die -60°C to +230°C -40V 2.3 Ω 5.3 A
XTR2N0525- D Ceramic 8 Side brazed DIP -60°C to +230°C -40V 2.3 Ω 5.3 A
XTR2N0525- FE Ceramic 8 Gull-wing flat pack with ePad -60°C to +230°C -40V 2.3 Ω 5.3 A
XTR2N0550- TD - - Tested Die -60°C to +230°C -40V 1.1 Ω 11.7 A

Discretes
Product Reference Maximum
Package Pin Operating Minimum RDS(ON)
Package Peak ID
Reference Extension Material Count Temperature BVDSS @ 230°C
@230°C
XER2N0525- S Plastic 8 Plastic SOIC -50°C to +175°C -40V 2.3 Ω 5.3 A

39
discretes

XTR2N04XX/XTR2N08XX
N-CHANNEL POWER MOSFETs
DESCRIPTION FEATURES
XTR2N04xx/XTR2N08xx transistor family is a N-channel power • Operational beyond the -60°C to +230°C
MOSFETs designed to reliably operate over a wide range of temperatures. temperature range.
Full functionality is guaranteed from -60°C to +230°C, though operation • Minimum BVDSS = 55V (for XTR2N04xx) and 90V (for
well below and above this temperature range is achieved. XTR2N08xx).
Fabricated on a Silicon-on-Insulator (SOI) process, XTR2N04xx and • Allowed VGS range –5.5V to +5.5V.
XTR2N08xx parts offer reduced leakage currents while providing high • Low RDS(on):
drain currents a low RDS (on). These features allow XTR2N04xx and
XTR2N08xx parts to be ideally suited for switching applications. - XTR2N0425: 0.560 Ω @ 230°C
XTR2N04xx and XTR2N08xx parts have been designed to reduce system - XTR2N0450: 0.255 Ω @ 230°C
cost and ease adoption by reducing the learning curve and providing - XTR2N0825: 1.54 Ω @ 230°C
smart and easy to use features. - XTR2N0850: 0.70 Ω @ 230°C

APPLICATIONS • Maximum ID:

• Reliability-critical, Automotive, Aeronautics & Aerospace, Down-hole. - XTR2N0425: 4.7A @ 230°C


• DC/DC converters, power switching, motor control, power inverters, - XTR2N0450: 10.3A @ 230°C
power linear regulators, power supply. - XTR2N0825: 3.4A @ 230°C
- XTR2N0850: 7.4A @ 230°C

• Ruggedized 3-lead TO257, 8-lead side brazed DIP and


8-lead FE with ePAD.
• Also available as tested dies.

TYPICAL APPLICATION DIAGRAM

VIN
Rbt
Cpvin

VIN
Cbt

Rlim
XTR2N04xx
XTR2N08xx
PWM Control XTR2N04xx
Lout

VOUT VOUT
& XTR2N08xx
R1 Driver Resr

Cout
Cout1 Cout2

R2

Rsense

40
XTR2N04XX/XTR2N08XX
N-CHANNEL POWER MOSFETs
ORDERING INFORMATION:

Product Reference Maximum


Package Pin Operating Minimum RDS(ON)
Package Peak ID
Reference Extension Material Count Temperature BVDSS @ 230°C
@230°C
XTR2N0425- TD - - Tested Die -60°C to +230°C 55V 0.560 Ω 4.7 A
XTR2N0425- D Ceramic 8 Side brazed DIP -60°C to +230°C 55V 0.560 Ω 4.7 A
XTR2N0425- T Metal 3 TO257 -60°C to +230°C 55V 0.560 Ω 4.7 A
XTR2N0450- TD - - Tested Die -60°C to +230°C 55V 0.255 Ω 10.3 A
XTR2N0825- TD - - Tested Die -60°C to +230°C 90V 1.54 Ω 3.4 A
XTR2N0825- D Ceramic 8 Side brazed DIP -60°C to +230°C 90V 1.54 Ω 3.4 A
XTR2N0825- FE Ceramic 8 Gull-wing flat pack with ePad -60°C to +230°C 90V 1.54 Ω 3.4 A
XTR2N0850- TD - - Tested Die -60°C to +230°C 90V 0.70 Ω 7.4 A
XTR2N0850- T Metal 3 TO257 -60°C to +230°C 90V 0.70 Ω 7.4 A

Discretes

41
Logic
XTR54000
MULTI-FUNCTION LOGIC GATES
DESCRIPTION FEATURES
XTR54000 is a configurable logic device able to provide four different • Operational beyond the -60°C to +230°C temperature
functions from the same silicon part. The full featured part is available in range.
a 16-pin package where two pins are used to select the corresponding • Supply voltage from 2.8V to 5.5V.
logic function of the other left-aligned 14 pins. Available functions are • Schmitt trigger inputs.
2-input NAND, NOR, XOR, IN-VERTER. • Compatible with NAND, NOR, XOR, INVERTER
The logic function can also be selected during assembly into 14-pin functions of the standard 54HC family.
packages offering pin-to-pin compatibility with standard parts from the • Latch-up free.
54HC family.
In all configurations, all inputs are Schmitt trigger for increased noise
margin.
XTR54000 parts have been designed to reduce system cost and ease
adoption by reducing the learning curve and providing smart and easy
to use features.
Parts from the XTR54000 family are available in ruggedized SMT and
thru-hole packages. Parts are also available as tested dies.

APPLICATIONS
• Reliability-critical, Automotive, Aeronautics & Aerospace, Down-hole. SET_1 SET_0 Logic function Equivalentpart
• Logic function generation, combinatorial logic. 0 0 Quad 2-input NAND 54HC132
0 1 Quad 2-input NOR 54HC7002
1 0 Quad 2-input XOR 54HC86
1 1 Hex INVERTER. 54HC14

1A VDD 1A VDD 1A VDD 1A VDD

1B 4B 1B 4B 1B 4B 6A
1Y
4A 4A 4A 2A
1Y 1Y 1Y 6Y
2A 2A 2A 5A
4Y 4Y 4Y 2Y
2B 3B 2B 3B 2B 3B 3A
5Y
3A 3A 3A 4A
2Y 2Y 2Y 3Y

GND GND GND GND


3Y 3Y 3Y 4Y

SET_0 SET_1 SET_0 SET_1 SET_0 SET_1 SET_0 SET_1

SET 0=0 / SET 1=0 SET 0=1 / SET 1=0 SET 0=0 / SET 1=1 SET 0=1 / SET 1=1
Equivalent to 54HC132 Equivalent to 54HC7002 Equivalent to 54HC86 Equivalent to 54HC14
Quad Schmitt Trigger Quad Schmitt Trigger Quad Schmitt Trigger Hex Schmitt Trigger
2-input NAND 2-input NOR 2-input XOR INVERTER

42
XTR54000
MULTI-FUNCTION LOGIC GATES
ORDERING INFORMATION:

Product Package Pin Operating


Package
Reference Extension Material Count Temperature

XTR54000- TD - - Tested Die -60°C to +230°C


XTR54000- D Ceramic 16 Side brazed DIP -60°C to +230°C
XTR54000- S Ceramic 16 SOIC -60°C to +230°C

Logic

43
Logic
XTR5001X
BIDIRECTIONAL LEVEL TRANSLATORS

DESCRIPTION FEATURES
The XTR5001x is a family of bidirectional level translators that can be • Operational beyond the -60°C to +230°C temperature
used for data communication between devices or systems operating range.
at different supply voltages. XTR5001x is able to operate from -60°C to • Supply voltage from 2.5V to 5.5V.
+230°C, with supply voltages from 2.5V to 5.5V. • OE/DIR input can be referenced to VCCA or VCCB.
In XTR50011 or XTR50012, the communication direction between An • Up to ±8mA output drive (Directional).
and Bn ports is automatically and independently sensed by the circuit. • Max Data Rates (Bidirectional) :
This allows simultaneous data flow in any direction.
In XTR50014 or XTR50015, the DIR logic-level input is used to control - 16Mbps (Translate to 5V)
the data flow direction. The DIR input can be powered by either VCCA - 12Mbps (Translate to 3.3V)
or VCCB. This brings more flexibility at system level. Parts from the - 8Mbps (Translate to 2.5V)
XTR5001x family are available in ruggedized SMT and through-hole
packages. Parts are also available as tested dies. • Max Data Rates (Directional) :

APPLICATIONS - 60Mbps (3.3 to 5V)


- 40Mbps (2.5 to 5V)
• Reliability-critical, Automotive, Aeronautics & Aerospace, Down-hole. - 30Mbps (Translate to 3.3V)
• Level shifted data transmission. - 20Mbps (Translate to 2.5V)

TYPICAL APPLICATION DIAGRAM

2.5V to 5.5V 2.5V to 5.5V 2.5V to 5.5V 2.5V to 5.5V


CVCCA

CVCCB

CVCCA

CVCCB
VCCA
VCCA

VCCB

VCCB

OE DIR

A1 B1 A1 B1

System A2 B2 Data System A2 B2 Data


Controller A3
XTR50011 B3 System Controller A3
XTR50014 B3 System
A4 B4 A4 B4

A5 B5 A5 B5

A6 B6 A6 B6
GND

GND

44
XTR5001X
BIDIRECTIONAL LEVEL TRANSLATORS
ORDERING INFORMATION:

Product Package Pin Operating


Package Function
Reference Extension Material Count Temperature

XTR50010- TD - - Tested Die -60°C to +230°C -


XTR50011- D Ceramic 16 Side brazed DIP -60°C to +230°C Bidirectional Translator
XTR50014- S Ceramic 16 SOIC -60°C to +230°C Unidirectional Translator
XTR50014- D Ceramic 16 Side brazed DIP -60°C to +230°C Unidirectional Translator

Logic

45
Logic
XTR5417X/XTR541G7X
EDGE-TRIGGERED D FLIP-FLOP FAMILY

DESCRIPTION FEATURES
The XTR5417x is a family of positive-edge-triggered D-type flip-flops. • Wide operating supply voltage from 2.8V to 5.5V.
XTR54175 have four D-type flip-flops with individual data input D and • Operational beyond the -60°C to +230°C temperature
both Q and Q outputs. The common clock CK and master reset MR ̅ range.
inputs trigs and resets all flip-flops simultaneously. • Up to ±8mA output drive.
XTR541G74 have a single D-type flip-flop with data D and clock CK • Schmitt-Trigger Inputs allow better switching noise
inputs, Q and Q outputs, and set S and reset R inputs. immunity.
Parts from the XTR5417x family are available in ruggedized through-hole • Ruggedized DIP packages.
package. Parts are also available as tested dies. • Also available as tested dies.

APPLICATIONS
• Reliability-critical, Automotive, Aeronautics & Aerospace, Down-hole.

PRODUCT HIGHLIGHTS

Frequency Divider4
4-bit Serial-in to Serial-out Shift register
INPUT XTR541G74
CK
MR VDD FREQUENCY VDD
(FR)

Q1 Q4 SERIAL D S
DATAOUT S
Q D D Q D Q
FF1 FF4
Q CK CK CK CK Q CK Q
R R R R
Q1 MR MR Q4 Q

SERIAL D1 D4
GND
DATAIN Q

XTR54175 FR/2

D2 D3
XTR541G74
CK
VDD
MR MR
Q2 Q3
R R
Q CK CK
K CK CK Q
D S
FF2 FF3
Q D D Q D S Q

Q2 Q3
CK Q
R R
Q
GND CK CLOCK
OUTPUT
GND FREQUENCY
Q
(FR/4)

46
XTR5417X/XTR541G7X
EDGE-TRIGGERED D FLIP-FLOP FAMILY
ORDERING INFORMATION:

Product Package Pin Operating


Package
Reference Extension Material Count Temperature

XTR54170- TD - - Tested Die -60°C to +230°C


XTR54175- D Ceramic 16 Side brazed DIP -60°C to +230°C
XTR541G74- D Ceramic 8 Side brazed DIP -60°C to +230°C

Logic

47
Interfacing & Transceivers
XTR4001X
ISOLATED TWO CHANNELS TRANSCEIVERS
DESCRIPTION
FEATURES
The XTR4001x implements a high-temperature dual-channel (2TX/RX)
isolated data transceiver. It can be used as a general purpose isolated • Supply voltage 3.3V to 5.5V.
transceiver. It is also well suited for isolated data communication • Dual Transmitter/Receiver (TX/RX) channels.
between a microcontroller or a PWM controller, with the intelligent power • Operating junction temperature from -60°C to +230°C.
gate driver XTR2602x. The galvanic isolation is achieved by external high • Data rate up to 4.2 Mbits/second per channel.
temperature 1:1 pulse transformers. • Transient common mode current immunity of 100mA
The XTR4001x integrates in a single package 2 transceivers (two full (50kV/μs across 2pF of inter-winding capacitance).
duplex channels). The implementation of 2 full duplex TX/RX isolated • Hysteresis on digital input for noise immunity.
channels requires 2 XTR4001x, one being connected to one side of the • Enable control signal on both TX and RX functions.
transformers and one to the other side. When used with XTR2602x, the • OOK (On-Off Keying) modulation.
XTR4001x allows implementing a 2 full duplex TX/RX channels with only • 3 bits programmable carrier frequency for EMC
one instance of XTR2602x. Indeed, the XTR2602x transceiver is fully compliance.
compatible with the XTR40010. The complete solution is optimized to • Configurable TX and RX modulation polarity.
minimize the size of the transformer, the number of external components, • Latch-up free.
the transmission delay (<120ns) and to maximize the noise margin, • Ruggedized SMT and DIP packages (CSOIC28).
even in harsh dV/dt conditions (50kV/µs across 2pF of inter-winding • Also available as tested dies.
capacitance).

APPLICATIONS
• Reliability-critical, Automotive,Aeronautics & Aerospace, Down-hole.
• Intelligent Power Modules (IPM).
• Power conversion, power generation and motor drive in aeronautics.
• Isolated gate drive for IGBT, MOSFET, JFET and SiC Transistors
• Isolated sensor interfaces.
• Isolated power inverters.

TYPICAL APPLICATION DIAGRAM

48
XTR4001X
ISOLATED TWO CHANNELS TRANSCEIVERS
ORDERING INFORMATION:

Product Package Pin Operating


Package
Reference Extension Material Count Temperature

XTR40010- TD - - Tested Die -60°C to +230°C


XTR40011- S Ceramic 28 SOIC -60°C to +230°C
XTR40011- D Ceramic 28 Side brazed DIP -60°C to +230°C
XTR40012- S Ceramic 16 SOIC -60°C to +230°C

& transceivers
Interfacing

49
PACKAGE OUTLINES
CDFP8

0.05
[0.002]

4x R 0.81 [0.032] 5.84


[0.230] 8x 0.13
[0.005]
8 5

5.84 5.21 6.60 ±0.25 7.75 ±0.25


[0.230] XTRPPPPP [0.205] [0.260 ±0.01] [0.305 ±0.01]
YYWWANN

1 4 0.00 ±0.05
[0.000 ±0.002] 4x R 0.64 [0.025]

0.64 5.46 ±0.25


ePAD
[0.025] [0.215 ±0.10]

1.45
[0.057] 5.46 ±0.25
6x 1.27 8x 0.30 ±0.05
[0.050] [0.012 ±0.002] [0.215 ±0.10]

3.81 ±0.13
[0.150 ±0.005]
Dimensions in mm [inches].
Tolerance ±0.13 mm [±.005 in], unless
otherwise specified

CDFP10

0.05
[0.002]

6.86
[0.270] 8x 0.13
[0.005]
10 6

6.86 6.35 7.62 10.16 Max


[0.270] XTRPPPPP [0.250] [0.300] [0.400 Max]
YYWWANN

1 5 ePAD 4x R 0.64 [0.025]

6.25 ±0.25
[0.250 ±0.10]

1.79
[0.070] 8x 1.27 10x 0.43 ±0.05
[0.050] 6.25 ±0.25
[0.017 ±0.002]
[0.250 ±0.10]

5.08 ±0.13
[0.200 ±0.005] Dimensions in mm [inches].
Tolerance ±0.13 mm [±.005 in], unless
otherwise specified

SOIC16

10.45 ±0.15
[0.411 ±0.006] 0.03
[0.001]
9.53 16x 0.20 ±0.03
4x R 0.13 [0.005] [0.375] [0.008 ±0.0012]
16 9

7.45 ±0.15 6.73 9.00 10.30 ±0.40


[0.293 ±0.006] XTRPPPPP [0.265] [0.354] [0.406 ±0.016]
0.30 Max
YYWWANN
[0.012 Max]

1 8
0.64
[0.025]

Dimensions in mm [inches].
2.41 ±0.25 16x 0.42 ±0.05 Tolerance ±0.13 mm [±.005 in], unless
[0.095 ±0.010] [0.017 ±0.002] otherwise specified
14x 1.27
[0.050]

8.89 ±0.15
[0.350 ±0.006]

Dimensions in mm [inches]
50
SOIC24

15.40 ±0.20
[0.606 ±0.008] 0.03
[0.001]
9.53 24x 0.20 ±0.03
4x R 0.13 [0.005] [0.375] [0.008 ±0.0012]
24 13

7.45 ±0.15 6.73 9.00 10.00 – 11.90


[0.293 ±0.006] XTRPPPPP [0.265] [0.354] [0.394 – 0.469]
0.30 Max
YYWWANN
[0.012 Max]

1 12
0.64
[0.025]

2.41 ±0.25 24x 0.42 ±0.05


[0.095 ±0.010] [0.017 ±0.002] Dimensions in mm [inches].
22x 1.27 Tolerance ±0.13 mm [±.005 in], unless
[0.050] otherwise specified
13.97 ±0.15
[0.550 ±0.006]

SOIC28

17.90 ±0.20
[0.705 ±0.008] 0.03
[0.001]
4x R 0.13 [0.005] 9.53 28x 0.20 ±0.03
[0.375] [0.008 ±0.0012]
28 15

7.45 ±0.15 6.73 9.00 10.00 – 11.90


[0.293 ±0.006] XTRPPPPP [0.265] [0.354] [0.394 – 0.469]
0.30 Max
YYWWANN
[0.012 Max]

1 14
0.64
[0.025]

2.41 ±0.25 28x 0.42 ±0.05


[0.095 ±0.010] [0.017 ±0.002]
26x 1.27
Dimensions in mm [inches].
[0.050] Tolerance ±0.13 mm [±.005 in], unless
otherwise specified
16.51 ±0.17
[0.650 ±0.007]

CDIP8

13.21 ±0.20
0.03
[0.520 ±0.008]
[0.001]

11.43 8x 0.03
[0.450] [0.010]
4x R 0.76 [0.030] 8 5

7.87 ±0.25 7.37 ±020 6.86


[0.310 ±0.010] [0.290 ±0.008] [0.270]
XTRPPPPP
YYWWANN
1 4

1.27
3.30 ±0.25
Package outlines

[0.050]
[0.130 ±0.010]

2.16
[0.085] 8x 4.00 ±0.50
[0.158 ±0.020]

6x 2.54 8x 0.46 Dimensions in mm [inches].


[0.100] [0.018] Tolerance ±0.13 mm [±.005 in], unless
otherwise specified
7.62 ±0.13
[0.300 ±0.005]

Dimensions in mm [inches]
51
PACKAGE OUTLINES
CDIP14

19.00 ±0.25
0.03
[0.748 ±0.010]
4x R 0.76 [0.030] [0.001]

11.43 14x 0.03


[0.450] [0.010]
14 8

7.87 ±0.25 7.37 ±020 6.86


[0.310 ±0.010] [0.290 ±0.008] [0.270]
XTRPPPPP
YYWWANN
1 7

3.30 ±0.25
[0.130 ±0.010]

2.16
[0.085] 14x 4.00 ±0.50
[0.158 ±0.020]

12x 2.54 14x 0.46


[0.100] [0.018]

15.24 ±0.13
[0.600 ±0.005]
Dimensions in mm [inches].
Tolerance ±0.13 mm [±.005 in], unless
otherwise specified

CDIP16

20.32 ±0.20
0.03
[0.800 ±0.008]
[0.001]
4x R 0.76 [0.030]
11.43 14x 0.03
[0.450] [0.010]
16 9

7.87 ±0.25 7.37 ±020 6.86


[0.310 ±0.010] [0.290 ±0.008] [0.270]
XTRPPPPP
YYWWANN
1 8

1.27 3.30 ±0.25


[0.050] [0.130 ±0.010]

2.16
[0.085] 16x 4.00 ±0.50
[0.158 ±0.020]

14x 2.54 16x 0.46


[0.100] [0.018]

17.78 ±0.13
[0.700 ±0.005]
Dimensions in mm [inches].
Tolerance ±0.13 mm [±.005 in], unless
otherwise specified

CDIP24

30.48 ±0.30
[1.200 ±0.012]

12.52 24x 0.03


[0.493] 0.03 [0.010]
4x R 0.51 [0.020]
24 13 [0.001]

15.49 ±0.25 15.11 ±0.25 12.52


[0.610 ±0.010] [0.595 ±0.010] [0.493]
XTRPPPPP
YYWWANN

1 12

1.27 3.68 ±0.25


[0.050] [0.145 ±0.010]

2.16
[0.085] 24x 4.00 ±0.50
[0.158 ±0.020]

22x 2.54 24x 0.46


[0.100] [0.018]

27.94 ±0.13
[1.100 ±0.005]

Dimensions in mm [inches].
Tolerance ±0.13 mm [±.005 in], unless
otherwise specified

52
CDIP28

35.56 ±0.36
[1.400 ±0.014]

12.52 28x 0.03


[0.493] 0.03 [0.010]
4x R 0.51 [0.020]
28 15 [0.001]

15.49 ±0.25 15.11 ±0.25 12.52


[0.610 ±0.010] [0.595 ±0.010] [0.493]
XTRPPPPP
YYWWANN

1 14

1.27 3.30 ±0.25


[0.050] [0.130 ±0.010]

2.16
[0.085] 24x 4.00 ±0.50
[0.158 ±0.020]

26x 2.54 28x 0.46


[0.100] [0.018]

33.02 ±0.13
[1.300 ±0.005]

Dimensions in mm [inches].
Tolerance ±0.13 mm [±.005 in], unless
otherwise specified
Dimensions in mm [inches]
TO18-3

2.54 ±0.15
[0.100 ±0.006]
1.27 ±0.07
[0.050 ±0.003]
0.90 ±0.12
[0.035 ±0.005]
5.40 ±0.05
[0.213 ±0.002] XTRPPPPP
YYWWANN
1.27 ±0.07 Connected to
[0.050 ±0.003] package cap
1.00 ±0.07
[0.039 ±0.003]
4.65 ±0.02
[0.183 ±0.004]

R 0.80 max [0.032]

5.20 ±0.15
[0.205 ±0.006]

Dimensions in mm [inches].
Tolerance ±0.13 mm [±.005 in], unless
otherwise specified
12.70 / 13.70
[0.500 / 0.540]

Ø 3x 0.45 ±0.05
[0.018 ±0.002]
Package outlines

53
PACKAGE OUTLINES
TO257-3 1200V

4.90 ±0.20
[0.193 ±0.008]
10.60 ±0.15 1.00 ±0.10
[0.417 ±0.028] [0.039 ±0.004]
Ø 3.50 [0.138]

0.1
[0.004]
16.50 ±0.20
[0.650 ±0.008]

[0.417 ±0.028]
13.50 ±0.20

10.60 ±0.15
[0.532 ±0.008]
XTRPPPPP
YYWWANN

4x R 0.5 [0.020]
Ø 3x 2.10 1.10
13.60 ±0.50 [0.083] [0.043]
[0.535 ±0.020]

1 2 3
2x 2.54 Ø 3x 0.80 2.90 ±0.20
[0.100] [0.032] [0.114 ±0.008]
5.08 ±0.20
[0.200 ±0.008]

TO257-3

4.90 ±0.20
[0.193 ±0.008]
10.60 ±0.15 1.00 ±0.10
[0.417 ±0.028] [0.039 ±0.004]
Ø 3.50 [0.138]

0.1
[0.004]
16.50 ±0.20
[0.650 ±0.008]

[0.417 ±0.028]
13.50 ±0.20

10.60 ±0.15
[0.532 ±0.008]
XTRPPPPP
YYWWANN

4x R 0.5 [0.020]
Ø 3x 2.10 1.10
18.00 ±0.50 [0.083] [0.043]
[0.707 ±0.020]

1 2 3
2x 2.54 Ø 3x 0.80 2.90 ±0.20
[0.100] [0.032] [0.114 ±0.008]
5.08 ±0.20
[0.200 ±0.008]

Dimensions in mm [inches].

TO257-6

4.95 ±0.15
[0.195 ±0.006]
10.54 ±0.15 1.02 ±0.10
[0.415 ±0.006] [0.040 ±0.004]
Ø3.68 [0.145]

13.45 ±0.50 0.05


[0.530 ±0.020] Ø 6x 0.80 ±0.13 [0.002]
[0.030 ±0.005]
16.64 ±0.25
[0.655 ±0.010] 1 6
13.51 ±0.20 5.08 ±0.15 10.54 ±0.15
[0.532 ±0.008] XTRPPPPP [0.200 ±0.006] [0.415 ±0.006]
3 4
YYWWANN 4x 2.54
[0.100]

3.10 ±0.20
4x R 1.27 [0.050]
[0.122 ±0.008]

Dimensions in mm [inches].
Tolerance ±0.13 mm [±.005 in], unless
otherwise specified

Dimensions in mm [inches]
54
TO254-3

6.60 ±0.13
[0.260 ±0.005]
13.72 ±0.13 1.14 ±0.13
[0.54 ±0.005] [0.045 ±0.005]
Ø3.61 [0.142]

0.064
[0.0025]

4x R 1.52 [0.060]

20.19 ±0.13
[0.795 ±0.005] 17.15 ±0.25
[0.675 ±0.01]
13.72 ±0.13
XTRPPPPP [0.54 ±0.005]

YYWWANN

Ø 3x 2.10
19.05 Min [0.083]
[0.750 Min]

2x 3.81 ±0.18 1 2 3
Ø 3x 1.02 3.81
[0.150 ±0.007]
[0.040 ] [0.150]
7.62 ±0.18
[0.300 ±0.007]

Dimensions in mm [inches].
Tolerance ±0.13 mm [±.005 in], unless
otherwise specified

LJCC28

SQ 11.43 ±0.25
[0.450 ±0.010]
25 19

26 18

[0.075 ±0.010]
1.91 ±0.25
28
SQ 12.45 ±0.25
1
[0.490 ±0.010] XTRPPPPP
YYWWANN
4 12

5 11
4x R 0.76 [0.03]
8.89 1.02 x45° 0.51 x45°
[0.350] [0.040] [0.020]

0.03 24x 1.27


[0.001] [0.050]
Dimensions in mm [inches].
1.52 Tolerance ±0.13 mm [±.005 in], unless
[0.060]
otherwise specified
28x 0.43 0.89 2.62 ±0.20
[0.017] [0.035] [0.103 ±0.008]
R 0.762
7.62 ±0.25
[0.030] [0.300 ±0.010]

10.92 ±0.51
[0.430 ±0.020]

LJCC52

SQ 19.05 ±0.28
[0.750 ±0.011]
46 34

47 33
[0.075 ±0.010]
1.91 ±0.25

52
SQ 20.07 ±0.25
1
[0.790 ±0.010] XTRPPPPP
YYWWANN

7 21

8 20
13.97 1.02 x45° 0.51 x45°
[0.550] [0.040] [0.020]
4x R 0.76 [0.03]
Package outlines

0.03
[0.001]

Dimensions in mm [inches].
1.52 Tolerance ±0.13 mm [±.005 in], unless
[0.060]
48x 1.27 52x 0.43 otherwise specified
0.89 2.62 ±0.20
[0.050] [0.017] [0.035] [0.103 ±0.008]
R 0.762
15.24 ±0.25
[0.030]
[0.600 ±0.010]
18.54 ±0.51
[0.730 ±0.020]

Dimensions in mm [inches]

55
PACKAGE OUTLINES
PSOIC8

8 5

0.151 0.232
0.157 0.244

1 4

0.189
0.197
0.010X45°
7°(8X)

0.054
0.068
0.008

SEATING PLANE
0.020
0.013 0.004 0°-8° 0.030
0.050 BSC
0.020 0.009

Dimensions in mm [inches]
Plastic QFP44

13.20 ± 0.25
(0.520 ± 0.010)

10.00 ± 0.10
(0.394 ± 0.004)

0.23 (0.009)
(0.079 ± 0.004)

0.13 (0.005)
2.35 (0.092) MAX

2.00 ± 0.10

R0.30 (0.012)
(0.520 ± 0.010)
(0.394 ± 0.004)

13.20 ± 0.25
10.00 ± 0.10

R0.30 (0.012)
0.13 (0.005)

0.25 (0.010) REF PLANE

0°- 7°
0.25 (0.010)
0.05 (0.002)
44
0.88 ± 0.15
(0.035 ± 0.006)

PIN 1 ID. 1.60 (0.063) REF

0.37 ± 0.07
(0.014 ± 0.003)

0.10 (0.004)

0°- 7°

0.80 (0.031) BSC.

56
REPRESENTATIVE

USA
Joule Sales
+ 1 512 961 4948

DISTRIBUTORS
[email protected]
www.joulesales.com

SWITZERLAND, AUSTRIA
GERMANY, AUSTRIA, ITALY MPI Distribution
NORWAY, SWEDEN, FINLAND + 41 56 483 34 44 ISRAEL
Protec GmbH [email protected] TURKEY SEGTRO LTD
+ 49 -89 6602923 www.mpi.ch TMS ELEKTRONIK + 972-50-5772333
[email protected] + 90 216 3732515 [email protected]
www.protec-semi.com [email protected] www.segtro.com
www.tms-elektronik.com

UK, IRELAND
Charcroft Electronics Ltd
+ 44 15 91 610 408 RUSSIA
[email protected] I. C. Quest
www.charcroft.com + 7 81378 32755
[email protected]
www.icquest.ru
USA
Trendsetter Electronics
+ 1 512 354 8655
JAPAN
[email protected]
Chronix Inc
www.trendsetter.com
+ 81 3 5322 7191
[email protected]
www.chronix.co.jp
LATIN AMERICA
K-1 Technologies
+ 1 (727) 342-1111
[email protected]
www.k1tech.net CHINA
CHINA
Walasey
MAGICALSEMI Elec tech Co,Ltd
CHINA + 852 23571676
+ 029-88815490
Technokey [email protected]
[email protected]
+ 852 2950 9818 www.walasey.com
http://www.magicalsemi.com/
[email protected]
www.technokey.com

CONTACTS
EASii IC X-REL semi
Headquarter
90, avenue Leon Blum BP 2612
38036 Grenoble Cedex 2
FRANCE
www.easii-ic.com
Support : [email protected]
Sales : [email protected]
Phone : +33 4 56 580 580
www.x-relsemi.com

You might also like