Scribd
Upload
112 views1 page

Name Plate - 2

This document provides specifications for a current transformer with the following key details: - The CT has ratios of 200-400-800/1A and is designed for use in a 132kV system. It has a rated primary current of 200-400-800A and can withstand short circuit currents of 40kA for 3 seconds. - The CT meets the IS 2705/1992 standard and has an insulation level of 275/650kV. It weighs approximately 450kg and has a minimum creepage distance of 3625mm. - The CT has 5 cores with the specified ratios. The connection diagram shows the terminal connections for each ratio tap. Cautions are provided regarding shorting terminals and ensuring

Uploaded by

lalitendu jena
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
112 views1 page

Name Plate - 2

This document provides specifications for a current transformer with the following key details: - The CT has ratios of 200-400-800/1A and is designed for use in a 132kV system. It has a rated primary current of 200-400-800A and can withstand short circuit currents of 40kA for 3 seconds. - The CT meets the IS 2705/1992 standard and has an insulation level of 275/650kV. It weighs approximately 450kg and has a minimum creepage distance of 3625mm. - The CT has 5 cores with the specified ratios. The connection diagram shows the terminal connections for each ratio tap. Cautions are provided regarding shorting terminals and ensuring

Uploaded by

lalitendu jena
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

MEHRU CURRENT TRANSFORMER

STANDARD IS 2705/1992 CT RATIO 200-400-800/1A,5C

HIGHEST SYSTEM VOLTAGE 145 kV RATED PRIMARY CURRENT 200-400-800

SYSTEM VOLTAGE 132 kV ST CURRENT 40 kA for 3sec

FREQUENCY 50 Hz SERIAL NO.


YEAR OF MFD. 2017
INSULATION LEVEL 275 /650kV

DRAWING NO. ME-132CT-GA-8082-03 TOTAL WEIGHT 450Kgs (Approx)

MIN. TOTAL CREEPAGE 3625 mm WEIGHT OF OIL 140 Litres(Approx)

120% of rated
RATED DYNAMIC CURRENT 100 kAP RATED THERMAL CURRENT primary current

'a' auxilary CT
CONNECTION DIAGRAM
P1 P2
PRIMARY

a
1S1 1S2 1S3 1S4 2S1 2S2 2S3 2S4 3S1 3S2 3S3 3S4 4S1 4S2 4S3 4S4 5S1 5S2 5S3 5S4 C E
SECONDARY Tan Delta terminal & Link
195

SECONDARY CONNECTION
FOR RATIO PRIMARY CONNECTION
CORE-1 CORE-2 CORE-3 CORE-4 CORE-5

200/1A P1-P2 1S1-1S2 2S1-2S2 3S1-3S2 4S1-4S2 5S1-5S2

400/1A P1-P2 1S1-1S3 2S1-2S3 3S1-3S3 4S1-4S3 5S1-5S3


Short -3S3-a
800/1A P1-P2 1S1-1S4 2S1-2S4 3S1-3S4 4S1-4S4 5S1-5S4
Short -3S4-a

CORE No. CORE-I CORE-2 CORE-3 CORE-4 CORE-5

RATIO 200-400-800/1A 200-400-800/1A 200-400-800/1A 200-400-800/1A 200-400-800/1A


BURDEN ---- ---- 20 VA ---- ----

CLASS PS PS 0.2 PS PS
I.S.F ---- ---- <5 ---- ----
Min.Knee Point Voltage
200/400/800 V 200/400/800 V ---- 200/400/800 V 200/400/800 V
(VK)
Max. Exiciting Current
in mA vk/4 @ 400/1A tap 50 mA 50 mA ---- 50 mA 50 mA

Max. Sec. Winding Res. at


10/20/40 Ohms 10/20/40 Ohms ---- 10/20/40 Ohms 10/20/40 Ohms
75° C (Ohms)

CAUTION:- I. Secondary terminals must be short circuited before the burden is disconnected.
II. Ensure Tan-delta bushing connection with earth.
MADE IN INDIA BY
III. Remove earth line only for loss angle measurement

SP-2/180, RIICO INDUSTRIAL AREA KHARANI EXT. BHIWADI-301019, RAJASTHAN (INDIA)

210
NOTE:-
1. MATERIAL OF NAME PLATE: ALUMINUM ANODIZED
2. THICKNESS OF NAME PLATE : 1.2mm
3. SERIAL NO. SHALL BE ENGRAVED BEFORE DISPATCH.

132kV-33kV GREEN FIELD PROJECT- STERLITE, SHENDRA.


STERLITE TECHNOLIGIES LIMITED
UNLESS OTHERWISE SPECIFIED DATE NAME MATERIAL

1. ALL DIMENSIONS IN mm DGN. 11.12.2017 SPS MEHRU


MEHRU ELECTRICAL &
DRN. 11.12.2017 RAKESH
2. TOLERANCE ON DIMENSIONS
ALU. ANODIZED
MECHANICAL
11.12.2017 BLS
±5% CHD.

3. SURFACE FINISH SCALE: N.T.S


ENGINEERS (P)LTD.
TITLE:-

NAME PLATE DRAWING FOR


R0 FOR APPROVAL 11.12.2017
4. SYMBOLS AND CONVENTIONS 132kV CURRENT TRANSFORMER
AS PER IS 696 - 1960 RATIO: 200-400-800/1-1-1-1-1-A DRG.NO
ME-132CT-NP-8082-03
DATED
REV.No. REVISION DESCRIPTION
INITIALS

You might also like